ryan77627/guix
1
0
Fork 0
mirror of https://git.in.rschanz.org/ryan77627/guix.git synced 2024-12-23 21:17:11 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions

gnu: qemu: Add fixes for CVE-2015-8619, CVE-2016-1981, CVE-2016-2197.

Browse source 
* gnu/packages/patches/qemu-CVE-2015-8619.patch,
  gnu/packages/patches/qemu-CVE-2016-1981.patch,
  gnu/packages/patches/qemu-CVE-2016-2197.patch,
  gnu/packages/patches/qemu-usb-ehci-oob-read.patch: New files.
* gnu-system.am (dist_patch_DATA): Add them.
* gnu/packages/qemu.scm (qemu)[source]: Add patches.
This commit is contained in:
Mark H Weaver 2016-02-22 10:17:48 -05:00
parent b784b1a9ea
commit 5879f0d649
6 changed files with 312 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
gnu-system.am
View file

@ -684,10 +684,14 @@ dist_patch_DATA = \
gnu/packages/patches/qemu-CVE-2015-8558.patch \
gnu/packages/patches/qemu-CVE-2015-8567.patch \
gnu/packages/patches/qemu-CVE-2015-8613.patch \
gnu/packages/patches/qemu-CVE-2015-8619.patch \
gnu/packages/patches/qemu-CVE-2015-8701.patch \
gnu/packages/patches/qemu-CVE-2015-8743.patch \
gnu/packages/patches/qemu-CVE-2016-1568.patch \
gnu/packages/patches/qemu-CVE-2016-1922.patch \
gnu/packages/patches/qemu-CVE-2016-1981.patch \
gnu/packages/patches/qemu-CVE-2016-2197.patch \
gnu/packages/patches/qemu-usb-ehci-oob-read.patch \
gnu/packages/patches/qemu-virtio-9p-use-accessor-to-get-thread-pool.patch \
gnu/packages/patches/qt4-ldflags.patch \
gnu/packages/patches/ratpoison-shell.patch \

119
gnu/packages/patches/qemu-CVE-2015-8619.patch Normal file
View file

@ -0,0 +1,119 @@
From: Wolfgang Bumiller <w.bumiller@proxmox.com>
Date: Wed, 13 Jan 2016 09:09:58 +0100
Subject: [PATCH] hmp: fix sendkey out of bounds write (CVE-2015-8619)
When processing 'sendkey' command, hmp_sendkey routine null
terminates the 'keyname_buf' array. This results in an OOB
write issue, if 'keyname_len' was to fall outside of
'keyname_buf' array.
Since the keyname's length is known the keyname_buf can be
removed altogether by adding a length parameter to
index_from_key() and using it for the error output as well.
Reported-by: Ling Liu <liuling-it@360.cn>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-Id: <20160113080958.GA18934@olga>
[Comparison with "<" dumbed down, test for junk after strtoul()
tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 64ffbe04eaafebf4045a3ace52a360c14959d196)
---
hmp.c | 18 ++++++++----------
include/ui/console.h | 2 +-
ui/input-legacy.c | 5 +++--
3 files changed, 12 insertions(+), 13 deletions(-)
diff --git a/hmp.c b/hmp.c
index 2140605..1904203 100644
--- a/hmp.c
+++ b/hmp.c
@@ -1734,21 +1734,18 @@ void hmp_sendkey(Monitor *mon, const QDict *qdict)
int has_hold_time = qdict_haskey(qdict, "hold-time");
int hold_time = qdict_get_try_int(qdict, "hold-time", -1);
Error *err = NULL;
- char keyname_buf[16];
char *separator;
int keyname_len;
while (1) {
separator = strchr(keys, '-');
keyname_len = separator ? separator - keys : strlen(keys);
- pstrcpy(keyname_buf, sizeof(keyname_buf), keys);
/* Be compatible with old interface, convert user inputted "<" */
- if (!strncmp(keyname_buf, "<", 1) && keyname_len == 1) {
- pstrcpy(keyname_buf, sizeof(keyname_buf), "less");
+ if (keys[0] == '<' && keyname_len == 1) {
+ keys = "less";
keyname_len = 4;
}
- keyname_buf[keyname_len] = 0;
keylist = g_malloc0(sizeof(*keylist));
keylist->value = g_malloc0(sizeof(*keylist->value));
@@ -1761,16 +1758,17 @@ void hmp_sendkey(Monitor *mon, const QDict *qdict)
}
tmp = keylist;
- if (strstart(keyname_buf, "0x", NULL)) {
+ if (strstart(keys, "0x", NULL)) {
char *endp;
- int value = strtoul(keyname_buf, &endp, 0);
- if (*endp != '\0') {
+ int value = strtoul(keys, &endp, 0);
+ assert(endp <= keys + keyname_len);
+ if (endp != keys + keyname_len) {
goto err_out;
}
keylist->value->type = KEY_VALUE_KIND_NUMBER;
keylist->value->u.number = value;
} else {
- int idx = index_from_key(keyname_buf);
+ int idx = index_from_key(keys, keyname_len);
if (idx == Q_KEY_CODE_MAX) {
goto err_out;
}
@@ -1792,7 +1790,7 @@ out:
return;
err_out:
- monitor_printf(mon, "invalid parameter: %s\n", keyname_buf);
+ monitor_printf(mon, "invalid parameter: %.*s\n", keyname_len, keys);
goto out;
}
diff --git a/include/ui/console.h b/include/ui/console.h
index c249db4..5739bdd 100644
--- a/include/ui/console.h
+++ b/include/ui/console.h
@@ -433,7 +433,7 @@ static inline int vnc_display_pw_expire(const char *id, time_t expires)
void curses_display_init(DisplayState *ds, int full_screen);
/* input.c */
-int index_from_key(const char *key);
+int index_from_key(const char *key, size_t key_length);
/* gtk.c */
void early_gtk_display_init(int opengl);
diff --git a/ui/input-legacy.c b/ui/input-legacy.c
index e0a39f0..3f28bbc 100644
--- a/ui/input-legacy.c
+++ b/ui/input-legacy.c
@@ -57,12 +57,13 @@ struct QEMUPutLEDEntry {
static QTAILQ_HEAD(, QEMUPutLEDEntry) led_handlers =
QTAILQ_HEAD_INITIALIZER(led_handlers);
-int index_from_key(const char *key)
+int index_from_key(const char *key, size_t key_length)
{
int i;
for (i = 0; QKeyCode_lookup[i] != NULL; i++) {
- if (!strcmp(key, QKeyCode_lookup[i])) {
+ if (!strncmp(key, QKeyCode_lookup[i], key_length) &&
+ !QKeyCode_lookup[i][key_length]) {
break;
}
}

95
gnu/packages/patches/qemu-CVE-2016-1981.patch Normal file
View file

@ -0,0 +1,95 @@
From: Laszlo Ersek <lersek@redhat.com>
Date: Tue, 19 Jan 2016 14:17:20 +0100
Subject: [PATCH] e1000: eliminate infinite loops on out-of-bounds transfer
start
The start_xmit() and e1000_receive_iov() functions implement DMA transfers
iterating over a set of descriptors that the guest's e1000 driver
prepares:
- the TDLEN and RDLEN registers store the total size of the descriptor
area,
- while the TDH and RDH registers store the offset (in whole tx / rx
descriptors) into the area where the transfer is supposed to start.
Each time a descriptor is processed, the TDH and RDH register is bumped
(as appropriate for the transfer direction).
QEMU already contains logic to deal with bogus transfers submitted by the
guest:
- Normally, the transmit case wants to increase TDH from its initial value
to TDT. (TDT is allowed to be numerically smaller than the initial TDH
value; wrapping at or above TDLEN bytes to zero is normal.) The failsafe
that QEMU currently has here is a check against reaching the original
TDH value again -- a complete wraparound, which should never happen.
- In the receive case RDH is increased from its initial value until
"total_size" bytes have been received; preferably in a single step, or
in "s->rxbuf_size" byte steps, if the latter is smaller. However, null
RX descriptors are skipped without receiving data, while RDH is
incremented just the same. QEMU tries to prevent an infinite loop
(processing only null RX descriptors) by detecting whether RDH assumes
its original value during the loop. (Again, wrapping from RDLEN to 0 is
normal.)
What both directions miss is that the guest could program TDLEN and RDLEN
so low, and the initial TDH and RDH so high, that these registers will
immediately be truncated to zero, and then never reassume their initial
values in the loop -- a full wraparound will never occur.
The condition that expresses this is:
xdh_start >= s->mac_reg[XDLEN] / sizeof(desc)
i.e., TDH or RDH start out after the last whole rx or tx descriptor that
fits into the TDLEN or RDLEN sized area.
This condition could be checked before we enter the loops, but
pci_dma_read() / pci_dma_write() knows how to fill in buffers safely for
bogus DMA addresses, so we just extend the existing failsafes with the
above condition.
This is CVE-2016-1981.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Prasad Pandit <ppandit@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1296044
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit dd793a74882477ca38d49e191110c17dfee51dcc)
---
hw/net/e1000.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/hw/net/e1000.c b/hw/net/e1000.c
index bec06e9..34d0823 100644
--- a/hw/net/e1000.c
+++ b/hw/net/e1000.c
@@ -908,7 +908,8 @@ start_xmit(E1000State *s)
* bogus values to TDT/TDLEN.
* there's nothing too intelligent we could do about this.
*/
- if (s->mac_reg[TDH] == tdh_start) {
+ if (s->mac_reg[TDH] == tdh_start ||
+ tdh_start >= s->mac_reg[TDLEN] / sizeof(desc)) {
DBGOUT(TXERR, "TDH wraparound @%x, TDT %x, TDLEN %x\n",
tdh_start, s->mac_reg[TDT], s->mac_reg[TDLEN]);
break;
@@ -1165,7 +1166,8 @@ e1000_receive_iov(NetClientState *nc, const struct iovec *iov, int iovcnt)
if (++s->mac_reg[RDH] * sizeof(desc) >= s->mac_reg[RDLEN])
s->mac_reg[RDH] = 0;
/* see comment in start_xmit; same here */
- if (s->mac_reg[RDH] == rdh_start) {
+ if (s->mac_reg[RDH] == rdh_start ||
+ rdh_start >= s->mac_reg[RDLEN] / sizeof(desc)) {
DBGOUT(RXERR, "RDH wraparound @%x, RDT %x, RDLEN %x\n",
rdh_start, s->mac_reg[RDT], s->mac_reg[RDLEN]);
set_ics(s, 0, E1000_ICS_RXO);

40
gnu/packages/patches/qemu-CVE-2016-2197.patch Normal file
View file

@ -0,0 +1,40 @@
From: John Snow <jsnow@redhat.com>
Date: Wed, 10 Feb 2016 13:29:40 -0500
Subject: [PATCH] ahci: Do not unmap NULL addresses
Definitely don't try to unmap a garbage address.
Reported-by: Zuozhi fzz <zuozhi.fzz@alibaba-inc.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1454103689-13042-2-git-send-email-jsnow@redhat.com
(cherry picked from commit 99b4cb71069f109b79b27bc629fc0cf0886dbc4b)
---
hw/ide/ahci.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 17f1cbd..cdc9299 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -661,6 +661,10 @@ static bool ahci_map_fis_address(AHCIDevice *ad)
static void ahci_unmap_fis_address(AHCIDevice *ad)
{
+ if (ad->res_fis == NULL) {
+ DPRINTF(ad->port_no, "Attempt to unmap NULL FIS address\n");
+ return;
+ }
dma_memory_unmap(ad->hba->as, ad->res_fis, 256,
DMA_DIRECTION_FROM_DEVICE, 256);
ad->res_fis = NULL;
@@ -677,6 +681,10 @@ static bool ahci_map_clb_address(AHCIDevice *ad)
static void ahci_unmap_clb_address(AHCIDevice *ad)
{
+ if (ad->lst == NULL) {
+ DPRINTF(ad->port_no, "Attempt to unmap NULL CLB address\n");
+ return;
+ }
dma_memory_unmap(ad->hba->as, ad->lst, 1024,
DMA_DIRECTION_FROM_DEVICE, 1024);
ad->lst = NULL;

49
gnu/packages/patches/qemu-usb-ehci-oob-read.patch Normal file
View file

@ -0,0 +1,49 @@
From: Prasad J Pandit <pjp@fedoraproject.org>
Date: Wed, 20 Jan 2016 01:26:46 +0530
Subject: [PATCH] usb: check page select value while processing iTD
While processing isochronous transfer descriptors(iTD), the page
select(PG) field value could lead to an OOB read access. Add
check to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1453233406-12165-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit 49d925ce50383a286278143c05511d30ec41a36e)
---
hw/usb/hcd-ehci.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c
index d07f228..c40013e 100644
--- a/hw/usb/hcd-ehci.c
+++ b/hw/usb/hcd-ehci.c
@@ -1404,21 +1404,23 @@ static int ehci_process_itd(EHCIState *ehci,
if (itd->transact[i] & ITD_XACT_ACTIVE) {
pg = get_field(itd->transact[i], ITD_XACT_PGSEL);
off = itd->transact[i] & ITD_XACT_OFFSET_MASK;
- ptr1 = (itd->bufptr[pg] & ITD_BUFPTR_MASK);
- ptr2 = (itd->bufptr[pg+1] & ITD_BUFPTR_MASK);
len = get_field(itd->transact[i], ITD_XACT_LENGTH);
if (len > max * mult) {
len = max * mult;
}
-
- if (len > BUFF_SIZE) {
+ if (len > BUFF_SIZE || pg > 6) {
return -1;
}
+ ptr1 = (itd->bufptr[pg] & ITD_BUFPTR_MASK);
qemu_sglist_init(&ehci->isgl, ehci->device, 2, ehci->as);
if (off + len > 4096) {
/* transfer crosses page border */
+ if (pg == 6) {
+ return -1; /* avoid page pg + 1 */
+ }
+ ptr2 = (itd->bufptr[pg + 1] & ITD_BUFPTR_MASK);
uint32_t len2 = off + len - 4096;
uint32_t len1 = len - len2;
qemu_sglist_add(&ehci->isgl, ptr1 + off, len1);

6
gnu/packages/qemu.scm
View file

@ -71,7 +71,11 @@ (define-public qemu
"qemu-CVE-2015-8613.patch"
"qemu-CVE-2015-8701.patch"
"qemu-CVE-2015-8743.patch"
"qemu-CVE-2016-1568.patch")))))
"qemu-CVE-2016-1568.patch"
"qemu-CVE-2015-8619.patch"
"qemu-CVE-2016-1981.patch"
"qemu-usb-ehci-oob-read.patch"
"qemu-CVE-2016-2197.patch")))))
(build-system gnu-build-system)
(arguments
'(#:phases (alist-replace