diff --git a/po/guix/da.po b/po/guix/da.po index 2d218bd7d3..1a8a9b3646 100644 --- a/po/guix/da.po +++ b/po/guix/da.po @@ -1,7 +1,7 @@ # Danish translation guix. -# Copyright (C) 2018 the authors of Guix (msgids) +# Copyright (C) 2019 the authors of Guix (msgids) # This file is distributed under the same license as the guix package. -# Joe Hansen , 2015, 2016, 2017, 2018. +# Joe Hansen , 2015, 2016, 2017, 2018, 2019. # # build -> kompilering # consider -> tag i betragtning (men mon ikke tag hensyn til eller overvej @@ -18,10 +18,10 @@ # msgid "" msgstr "" -"Project-Id-Version: guix 0.15.0\n" +"Project-Id-Version: guix 0.16.0\n" "Report-Msgid-Bugs-To: ludo@gnu.org\n" -"POT-Creation-Date: 2018-06-22 14:08+0200\n" -"PO-Revision-Date: 2018-08-12 14:10+0200\n" +"POT-Creation-Date: 2018-11-28 15:05+0100\n" +"PO-Revision-Date: 2019-02-05 14:10+0200\n" "Last-Translator: joe Hansen \n" "Language-Team: Danish \n" "Language: da\n" @@ -72,42 +72,42 @@ msgstr "" msgid "Try adding @code{(use-service-modules ~a)}." msgstr "Prøv at tilføje @code{(use-service-modules ~a)}." -#: gnu/packages.scm:92 +#: gnu/packages.scm:94 #, scheme-format msgid "~a: patch not found" msgstr "~a: rettelse blev ikke fundet" -#: gnu/packages.scm:108 +#: gnu/packages.scm:110 #, scheme-format msgid "could not find bootstrap binary '~a' for system '~a'" msgstr "kunne ikke finde bootstraps binære »~a« for system »~a«" -#: gnu/packages.scm:259 +#: gnu/packages.scm:270 #, scheme-format msgid "ambiguous package specification `~a'~%" msgstr "tvetydig pakkespecifikation »~a«~%" -#: gnu/packages.scm:260 +#: gnu/packages.scm:271 #, scheme-format msgid "choosing ~a@~a from ~a~%" msgstr "vælger ~a@~a fra ~a~%" -#: gnu/packages.scm:265 guix/scripts/package.scm:238 +#: gnu/packages.scm:276 guix/scripts/package.scm:206 #, scheme-format msgid "package '~a' has been superseded by '~a'~%" msgstr "pakken »~a« er blevet efterfulgt af »~a«~%" -#: gnu/packages.scm:272 +#: gnu/packages.scm:283 #, scheme-format msgid "~A: package not found for version ~a~%" msgstr "~A: pakke ikke fundet for version ~a~%" -#: gnu/packages.scm:273 +#: gnu/packages.scm:284 #, scheme-format msgid "~A: unknown package~%" msgstr "~A: ukendt pakke~%" -#: gnu/packages.scm:301 +#: gnu/packages.scm:312 #, scheme-format msgid "package `~a' lacks output `~a'~%" msgstr "pakke »~a« mangler uddata »~a«~%" @@ -206,52 +206,52 @@ msgstr "" msgid "no target of type '~a' for service '~a'" msgstr "intet mål af typen »~a« for tjeneste ~a" -#: gnu/services.scm:702 gnu/services.scm:795 +#: gnu/services.scm:702 gnu/services.scm:805 #, scheme-format msgid "more than one target service of type '~a'" msgstr "mere end en måltjeneste af typen »~a«" -#: gnu/services.scm:785 +#: gnu/services.scm:795 #, scheme-format msgid "service of type '~a' not found" msgstr "tjenste af typen »~a« blev ikke fundet" -#: gnu/system.scm:320 +#: gnu/system.scm:317 #, scheme-format msgid "unrecognized boot parameters at '~a'~%" msgstr "ikke genkendte opstartsparametre ved »~a«~%" -#: gnu/system.scm:731 +#: gnu/system.scm:725 #, scheme-format msgid "using a string for file '~a' is deprecated; use 'plain-file' instead~%" msgstr "brug af en streng for filen »~a« er forældet; brug »plain-file« i stedet~%" -#: gnu/system.scm:747 +#: gnu/system.scm:741 #, scheme-format msgid "using a monadic value for '~a' is deprecated; use 'plain-file' instead~%" msgstr "brug af en unik værdi for »~a« er forældet; brug »plain-file« i stedet~%" -#: gnu/system.scm:892 +#: gnu/system.scm:885 #, scheme-format msgid "~a: invalid locale name" msgstr "~a: ugyldigt navn for regionsindstillinger" -#: gnu/services/shepherd.scm:175 +#: gnu/services/shepherd.scm:192 #, scheme-format msgid "service '~a' provided more than once" msgstr "tjenesten »~a« tilbudt mere end en gang" -#: gnu/services/shepherd.scm:190 +#: gnu/services/shepherd.scm:207 #, scheme-format msgid "service '~a' requires '~a', which is not provided by any service" msgstr "tjenesten »~a« kræver »~a«, som ikke tilbydes af nogen tjeneste" -#: gnu/system/mapped-devices.scm:142 +#: gnu/system/mapped-devices.scm:147 #, scheme-format msgid "you may need these modules in the initrd for ~a:~{ ~a~}" msgstr "du kan få brug for disse moduler i initrd for ~a:~{ ~a~}" -#: gnu/system/mapped-devices.scm:146 +#: gnu/system/mapped-devices.scm:151 #, scheme-format msgid "" "Try adding them to the\n" @@ -264,6 +264,9 @@ msgid "" " (initrd-modules (append (list~{ ~s~})\n" " %base-initrd-modules)))\n" "@end example\n" +"\n" +"If you think this diagnostic is inaccurate, use the @option{--skip-checks}\n" +"option of @command{guix system}.\n" msgstr "" "Prøv at tilføje dem til\n" "feltet @code{initrd-modules} i din @code{operating-system}-erklæring, sammen\n" @@ -275,42 +278,46 @@ msgstr "" " (initrd-modules (append (list~{ ~s~})\n" " %base-initrd-modules)))\n" "@end example\n" +"\n" +"Hvis du tror denne diagnostik er upræcis, så brug tilvalget\n" +"@option{--skip-checks} for @command{guix system}.\n" -#: gnu/system/mapped-devices.scm:222 +#: gnu/system/mapped-devices.scm:230 #, scheme-format msgid "no LUKS partition with UUID '~a'" msgstr "ingen LUKS-partition med UUID »~a«" -#: gnu/system/shadow.scm:245 +#: gnu/system/shadow.scm:258 #, scheme-format msgid "supplementary group '~a' of user '~a' is undeclared" msgstr "supplerende gruppe »~a« for bruger »~a« er ikke erklæret" -#: gnu/system/shadow.scm:255 +#: gnu/system/shadow.scm:268 #, scheme-format msgid "primary group '~a' of user '~a' is undeclared" msgstr "primær gruppe »~a« for brugeren »~a« er ikke erklæret" -#: guix/scripts.scm:56 +#: guix/scripts.scm:60 #, scheme-format msgid "invalid argument: ~a~%" msgstr "ugyldigt argument: ~a~%" -#: guix/scripts.scm:84 guix/scripts/download.scm:135 -#: guix/scripts/import/cran.scm:82 guix/scripts/import/elpa.scm:85 +#: guix/scripts.scm:88 guix/scripts/download.scm:135 +#: guix/scripts/import/cran.scm:84 guix/scripts/import/elpa.scm:85 #: guix/scripts/publish.scm:881 guix/scripts/edit.scm:81 +#: guix/scripts/describe.scm:197 guix/scripts/processes.scm:216 #, scheme-format msgid "~A: unrecognized option~%" msgstr "~A: ikke genkendt tilvalg~%" -#: guix/scripts.scm:179 +#: guix/scripts.scm:182 #, scheme-format msgid "Your Guix installation is ~a day old.\n" msgid_plural "Your Guix installation is ~a days old.\n" msgstr[0] "Din Guix-installation er ~a dag gammel.\n" msgstr[1] "Din Guix-installation er ~a dage gammel.\n" -#: guix/scripts.scm:184 +#: guix/scripts.scm:187 #, scheme-format msgid "" "Consider running 'guix pull' followed by\n" @@ -319,22 +326,54 @@ msgstr "" "Tag i betragtning at afvikle »guix pull« efterfulgt af\n" "»~a« for at få opdaterede pakker og sikkerhedsopdateringer.\n" -#: guix/scripts/build.scm:81 +#: guix/scripts.scm:211 +#, scheme-format +msgid "only ~,1f% of free space available on ~a~%" +msgstr "kun ~,1f% ledig plads tilgængelig på ~a~%" + +#: guix/scripts.scm:214 +#, scheme-format +msgid "" +"Consider deleting old profile\n" +"generations and collecting garbage, along these lines:\n" +"\n" +"@example\n" +"guix package -p ~s --delete-generations=1m\n" +"guix gc\n" +"@end example\n" +msgstr "" +"Overvej at slette de gamle profiloprettelser\n" +"og affaldsindsamling; på denne måde:\n" +"\n" +"@example\n" +"guix package -p ~s --delete-generations=1m\n" +"guix gc\n" +"@end example\n" + +#: guix/scripts.scm:222 +msgid "" +"Consider running @command{guix gc} to free\n" +"space." +msgstr "" +"Overvej at afvikle @command{guix gc} for at\n" +"frigøre plads." + +#: guix/scripts/build.scm:84 #, scheme-format msgid "cannot access build log at '~a':~%" msgstr "kan ikke tilgå kompileringsloggen på »~a«:~%" -#: guix/scripts/build.scm:135 +#: guix/scripts/build.scm:138 #, scheme-format msgid "failed to create GC root `~a': ~a~%" msgstr "kunne ikke oprette GC-root »~a«: ~a~%" -#: guix/scripts/build.scm:237 +#: guix/scripts/build.scm:240 #, scheme-format msgid "invalid replacement specification: ~s~%" msgstr "ugyldig erstatningsspecifikation: ~s~%" -#: guix/scripts/build.scm:294 +#: guix/scripts/build.scm:297 msgid "" "\n" " --with-source=SOURCE\n" @@ -344,7 +383,7 @@ msgstr "" " --with-source=KILDE\n" " brug KILDE når den tilsvarende pakke kompileres" -#: guix/scripts/build.scm:297 +#: guix/scripts/build.scm:300 msgid "" "\n" " --with-input=PACKAGE=REPLACEMENT\n" @@ -354,7 +393,7 @@ msgstr "" " --with-input=PAKKE=ERSTATNING\n" " erstat afhængighedsPAKKE med ERSTATNING" -#: guix/scripts/build.scm:300 +#: guix/scripts/build.scm:303 msgid "" "\n" " --with-graft=PACKAGE=REPLACEMENT\n" @@ -364,12 +403,12 @@ msgstr "" " --with-graft=PAKKE=ERSTATNING\n" " pod ERSTATNING på pakker som refererer til PAKKE" -#: guix/scripts/build.scm:325 +#: guix/scripts/build.scm:328 #, scheme-format msgid "transformation '~a' had no effect on ~a~%" msgstr "transformation »~a« havde ingen effekt på ~a~%" -#: guix/scripts/build.scm:343 +#: guix/scripts/build.scm:346 msgid "" "\n" " -L, --load-path=DIR prepend DIR to the package module search path" @@ -377,7 +416,7 @@ msgstr "" "\n" " -L, --load-path=MAPPE foranstil MAPPE til pakkemodulets søgesti" -#: guix/scripts/build.scm:345 +#: guix/scripts/build.scm:348 msgid "" "\n" " -K, --keep-failed keep build tree of failed builds" @@ -385,7 +424,7 @@ msgstr "" "\n" " -K, --keep-failed bevar kompileringstræ for mislykkede kompileringer" -#: guix/scripts/build.scm:347 +#: guix/scripts/build.scm:350 msgid "" "\n" " -k, --keep-going keep going when some of the derivations fail" @@ -393,7 +432,7 @@ msgstr "" "\n" " -k, --keep-going fortsæt når nogle af derivaterne fejler" -#: guix/scripts/build.scm:349 +#: guix/scripts/build.scm:352 msgid "" "\n" " -n, --dry-run do not build the derivations" @@ -401,7 +440,7 @@ msgstr "" "\n" " -n, --dry-run kompiler ikke derivater" -#: guix/scripts/build.scm:351 +#: guix/scripts/build.scm:354 msgid "" "\n" " --fallback fall back to building when the substituter fails" @@ -409,7 +448,7 @@ msgstr "" "\n" " --fallback fald tilbage til kompilering når substituten fejler" -#: guix/scripts/build.scm:353 +#: guix/scripts/build.scm:356 msgid "" "\n" " --no-substitutes build instead of resorting to pre-built substitutes" @@ -418,7 +457,7 @@ msgstr "" " --no-substitutes kompiler i stedet for at bruge prækompilerede\n" " substitutter" -#: guix/scripts/build.scm:355 guix/scripts/size.scm:232 +#: guix/scripts/build.scm:358 guix/scripts/size.scm:223 msgid "" "\n" " --substitute-urls=URLS\n" @@ -428,7 +467,7 @@ msgstr "" " --substitute-urls=ADRESSER\n" " hent substitut fra ADRESSER hvis de er godkendt" -#: guix/scripts/build.scm:358 +#: guix/scripts/build.scm:361 msgid "" "\n" " --no-grafts do not graft packages" @@ -436,7 +475,7 @@ msgstr "" "\n" " --no-grafts pod ikke pakker" -#: guix/scripts/build.scm:360 +#: guix/scripts/build.scm:363 msgid "" "\n" " --no-build-hook do not attempt to offload builds via the build hook" @@ -445,7 +484,7 @@ msgstr "" " --no-build-hook forsøg ikke at aflaste kompileringer via\n" " kompileringskrogen" -#: guix/scripts/build.scm:362 +#: guix/scripts/build.scm:365 msgid "" "\n" " --max-silent-time=SECONDS\n" @@ -456,7 +495,7 @@ msgstr "" " marker kompileringen som mislykket efter SEKUNDERs\n" " stilhed" -#: guix/scripts/build.scm:365 +#: guix/scripts/build.scm:368 msgid "" "\n" " --timeout=SECONDS mark the build as failed after SECONDS of activity" @@ -465,7 +504,7 @@ msgstr "" " --timeout=SEKUNDER marker kompileringen som mislykket efter SEKUNDERs\n" " aktivitet" -#: guix/scripts/build.scm:367 +#: guix/scripts/build.scm:370 msgid "" "\n" " --verbosity=LEVEL use the given verbosity LEVEL" @@ -473,7 +512,7 @@ msgstr "" "\n" " --verbosity=NIVEAU brug det angivne uddybnings-NIVEAU" -#: guix/scripts/build.scm:369 +#: guix/scripts/build.scm:372 msgid "" "\n" " --rounds=N build N times in a row to detect non-determinism" @@ -482,7 +521,7 @@ msgstr "" " --rounds=N kompiler N gange i træk for at detektere\n" " ikkedeterminisme" -#: guix/scripts/build.scm:371 +#: guix/scripts/build.scm:374 msgid "" "\n" " -c, --cores=N allow the use of up to N CPU cores for the build" @@ -491,7 +530,7 @@ msgstr "" " -c, --cores=N tillad brugen af op til N cpu-kerner til\n" " kompileringen" -#: guix/scripts/build.scm:373 +#: guix/scripts/build.scm:376 msgid "" "\n" " -M, --max-jobs=N allow at most N build jobs" @@ -499,12 +538,12 @@ msgstr "" "\n" " -M, --max-jobs=N tillad højst N kompileringsjob" -#: guix/scripts/build.scm:479 guix/scripts/build.scm:486 +#: guix/scripts/build.scm:486 guix/scripts/build.scm:493 #, scheme-format msgid "not a number: '~a' option argument: ~a~%" msgstr "ikke et nummer: »~a« tilvalgsparameter: ~a~%" -#: guix/scripts/build.scm:505 +#: guix/scripts/build.scm:514 msgid "" "Usage: guix build [OPTION]... PACKAGE-OR-DERIVATION...\n" "Build the given PACKAGE-OR-DERIVATION and return their output paths.\n" @@ -512,7 +551,7 @@ msgstr "" "Brug: guix build [TILVALG]... PAKKE-ELLER-DERIVAT...\n" "Kompiler den angivne PAKKE-ELLER-DERIVAT og returner deres uddatastier.\n" -#: guix/scripts/build.scm:507 +#: guix/scripts/build.scm:516 msgid "" "\n" " -e, --expression=EXPR build the package or derivation EXPR evaluates to" @@ -521,7 +560,7 @@ msgstr "" " -e, --expression=UDTRYK\n" " kompiler pakken eller derivatet UDTRYK evaluerer til" -#: guix/scripts/build.scm:509 +#: guix/scripts/build.scm:518 msgid "" "\n" " -f, --file=FILE build the package or derivation that the code within\n" @@ -531,7 +570,7 @@ msgstr "" " -f, --file=FIL kompiler pakken eller derivatet som koden i FIL\n" " evaluerer til" -#: guix/scripts/build.scm:512 +#: guix/scripts/build.scm:521 msgid "" "\n" " -S, --source build the packages' source derivations" @@ -539,7 +578,7 @@ msgstr "" "\n" " -S, --source kompiler pakkernes kildederivater" -#: guix/scripts/build.scm:514 +#: guix/scripts/build.scm:523 msgid "" "\n" " --sources[=TYPE] build source derivations; TYPE may optionally be one\n" @@ -549,7 +588,7 @@ msgstr "" " --sources[=TYPE] kompileringskildederivater; TYPE kan valgfrit være\n" " »package«, »all« (standard) eller »transitive«" -#: guix/scripts/build.scm:517 guix/scripts/pack.scm:646 +#: guix/scripts/build.scm:526 guix/scripts/pack.scm:712 msgid "" "\n" " -s, --system=SYSTEM attempt to build for SYSTEM--e.g., \"i686-linux\"" @@ -557,7 +596,7 @@ msgstr "" "\n" " -s, --system=SYSTEM forsøger at kompilere for SYSTEM--f.eks. »i686-linux«" -#: guix/scripts/build.scm:519 guix/scripts/pack.scm:648 +#: guix/scripts/build.scm:528 guix/scripts/pack.scm:714 msgid "" "\n" " --target=TRIPLET cross-build for TRIPLET--e.g., \"armel-linux-gnu\"" @@ -565,7 +604,7 @@ msgstr "" "\n" " --target=TRIPLET krydskompiler for TRIPLET--f.eks. »armel-linux-gnu«" -#: guix/scripts/build.scm:521 +#: guix/scripts/build.scm:530 msgid "" "\n" " -d, --derivations return the derivation paths of the given packages" @@ -573,7 +612,7 @@ msgstr "" "\n" " -d, --derivations returner de derivate stier for de givne pakker" -#: guix/scripts/build.scm:523 +#: guix/scripts/build.scm:532 msgid "" "\n" " --check rebuild items to check for non-determinism issues" @@ -582,7 +621,7 @@ msgstr "" " --check kompiler elementer igen for at kontrollere\n" " ikkedeterminisme" -#: guix/scripts/build.scm:525 +#: guix/scripts/build.scm:534 msgid "" "\n" " --repair repair the specified items" @@ -590,7 +629,7 @@ msgstr "" "\n" " --repair reparer de specificerede elementer" -#: guix/scripts/build.scm:527 +#: guix/scripts/build.scm:536 msgid "" "\n" " -r, --root=FILE make FILE a symlink to the result, and register it\n" @@ -600,7 +639,7 @@ msgstr "" " -r, --root=FIL gør FIL til en symbolsk henvisning for resultatet, og\n" " registrer den som en affaldsindsamlerroot" -#: guix/scripts/build.scm:530 +#: guix/scripts/build.scm:539 msgid "" "\n" " -q, --quiet do not show the build log" @@ -608,7 +647,7 @@ msgstr "" "\n" " -q, --quiet vis ikke kompileringsloggen" -#: guix/scripts/build.scm:532 +#: guix/scripts/build.scm:541 msgid "" "\n" " --log-file return the log file names for the given derivations" @@ -616,16 +655,17 @@ msgstr "" "\n" " --log-file returner logfilnavnen for de givne derivater" -#: guix/scripts/build.scm:539 guix/scripts/download.scm:83 -#: guix/scripts/package.scm:395 guix/scripts/gc.scm:76 -#: guix/scripts/hash.scm:59 guix/scripts/import.scm:92 -#: guix/scripts/import/cran.scm:47 guix/scripts/pull.scm:120 -#: guix/scripts/substitute.scm:879 guix/scripts/system.scm:993 -#: guix/scripts/lint.scm:1107 guix/scripts/publish.scm:94 -#: guix/scripts/edit.scm:44 guix/scripts/size.scm:243 -#: guix/scripts/graph.scm:466 guix/scripts/challenge.scm:241 -#: guix/scripts/copy.scm:122 guix/scripts/pack.scm:661 -#: guix/scripts/weather.scm:258 guix/scripts/container.scm:33 +#: guix/scripts/build.scm:548 guix/scripts/download.scm:83 +#: guix/scripts/package.scm:366 guix/scripts/gc.scm:76 +#: guix/scripts/hash.scm:60 guix/scripts/import.scm:93 +#: guix/scripts/import/cran.scm:47 guix/scripts/pull.scm:95 +#: guix/scripts/substitute.scm:889 guix/scripts/system.scm:1017 +#: guix/scripts/lint.scm:1115 guix/scripts/publish.scm:94 +#: guix/scripts/edit.scm:44 guix/scripts/size.scm:234 +#: guix/scripts/graph.scm:472 guix/scripts/challenge.scm:241 +#: guix/scripts/copy.scm:122 guix/scripts/pack.scm:730 +#: guix/scripts/weather.scm:259 guix/scripts/describe.scm:71 +#: guix/scripts/processes.scm:200 guix/scripts/container.scm:34 #: guix/scripts/container/exec.scm:43 msgid "" "\n" @@ -634,16 +674,17 @@ msgstr "" "\n" " -h, --help vis denne hjælpetekst og afslut" -#: guix/scripts/build.scm:541 guix/scripts/download.scm:85 -#: guix/scripts/package.scm:397 guix/scripts/gc.scm:78 -#: guix/scripts/hash.scm:61 guix/scripts/import.scm:94 -#: guix/scripts/import/cran.scm:49 guix/scripts/pull.scm:122 -#: guix/scripts/substitute.scm:881 guix/scripts/system.scm:995 -#: guix/scripts/lint.scm:1111 guix/scripts/publish.scm:96 -#: guix/scripts/edit.scm:46 guix/scripts/size.scm:245 -#: guix/scripts/graph.scm:468 guix/scripts/challenge.scm:243 -#: guix/scripts/copy.scm:124 guix/scripts/pack.scm:663 -#: guix/scripts/weather.scm:260 guix/scripts/container.scm:35 +#: guix/scripts/build.scm:550 guix/scripts/download.scm:85 +#: guix/scripts/package.scm:368 guix/scripts/gc.scm:78 +#: guix/scripts/hash.scm:62 guix/scripts/import.scm:95 +#: guix/scripts/import/cran.scm:51 guix/scripts/pull.scm:97 +#: guix/scripts/substitute.scm:891 guix/scripts/system.scm:1019 +#: guix/scripts/lint.scm:1119 guix/scripts/publish.scm:96 +#: guix/scripts/edit.scm:46 guix/scripts/size.scm:236 +#: guix/scripts/graph.scm:474 guix/scripts/challenge.scm:243 +#: guix/scripts/copy.scm:124 guix/scripts/pack.scm:732 +#: guix/scripts/weather.scm:261 guix/scripts/describe.scm:73 +#: guix/scripts/processes.scm:202 guix/scripts/container.scm:36 #: guix/scripts/container/exec.scm:45 msgid "" "\n" @@ -652,7 +693,7 @@ msgstr "" "\n" " -V, --version vis versioninformation og afslut" -#: guix/scripts/build.scm:568 +#: guix/scripts/build.scm:577 #, scheme-format msgid "" "invalid argument: '~a' option argument: ~a, ~\n" @@ -661,22 +702,22 @@ msgstr "" "ugyldigt argument: »~a« tilvalgsargumentet: ~a, ~\n" "skal være »package«, »all« eller »transitive«~%" -#: guix/scripts/build.scm:621 +#: guix/scripts/build.scm:630 #, scheme-format msgid "~s: not something we can build~%" msgstr "~s: ikke noget vi kan kompilere~%" -#: guix/scripts/build.scm:679 +#: guix/scripts/build.scm:688 #, scheme-format msgid "~a: warning: package '~a' has no source~%" msgstr "~a: advarsel: pakken »~a« har ingen kilde~%" -#: guix/scripts/build.scm:713 +#: guix/scripts/build.scm:726 #, scheme-format msgid "no build log for '~a'~%" msgstr "ingen kompileringslog for »~a«~%" -#: guix/discovery.scm:90 +#: guix/discovery.scm:91 #, scheme-format msgid "cannot access `~a': ~a~%" msgstr "kan ikke tilgå »~a«: ~a~%" @@ -697,7 +738,7 @@ msgstr "" "Understøttede formater: »nix-base32« (standard), »base32«, og »base16«\n" "(»hex« og »hexadecimal« kan også bruges).\n" -#: guix/scripts/download.scm:75 guix/scripts/hash.scm:54 +#: guix/scripts/download.scm:75 guix/scripts/hash.scm:55 msgid "" "\n" " -f, --format=FMT write the hash in the given format" @@ -723,12 +764,12 @@ msgstr "" "\n" " -o, --output=FIL hent til FIL" -#: guix/scripts/download.scm:103 guix/scripts/hash.scm:82 +#: guix/scripts/download.scm:103 guix/scripts/hash.scm:83 #, scheme-format msgid "unsupported hash format: ~a~%" msgstr "ikke understøttet hash-format: ~a~%" -#: guix/scripts/download.scm:138 guix/scripts/package.scm:884 +#: guix/scripts/download.scm:138 guix/scripts/package.scm:905 #: guix/scripts/publish.scm:883 #, scheme-format msgid "~A: extraneous argument~%" @@ -749,70 +790,45 @@ msgstr "~a: kunne ikke fortolke URI~%" msgid "~a: download failed~%" msgstr "~a: overførsel mislykkede~%" -#: guix/scripts/package.scm:72 -#, scheme-format -msgid "Try \"info '(guix) Invoking guix package'\" for more information.~%" -msgstr "Prøv »info '(guix) Invoking guix package'« for yderligere information.~%" - -#: guix/scripts/package.scm:94 -#, scheme-format -msgid "error: while creating directory `~a': ~a~%" -msgstr "fejl: under oprettelse af mappe »~a«: ~a~%" - -#: guix/scripts/package.scm:98 -#, scheme-format -msgid "Please create the `~a' directory, with you as the owner.~%" -msgstr "Opret venligst mappen »~a«, med dig som ejer.~%" - -#: guix/scripts/package.scm:105 -#, scheme-format -msgid "error: directory `~a' is not owned by you~%" -msgstr "fejl: mappen »~a« er ikke ejet af dig~%" - -#: guix/scripts/package.scm:108 -#, scheme-format -msgid "Please change the owner of `~a' to user ~s.~%" -msgstr "Ændr venligst ejeren af »~a« til brugeren ~s.~%" - -#: guix/scripts/package.scm:143 +#: guix/scripts/package.scm:109 #, scheme-format msgid "not removing generation ~a, which is current~%" msgstr "fjerner ikke generation ~a, som er nuværende~%" -#: guix/scripts/package.scm:150 +#: guix/scripts/package.scm:116 #, scheme-format msgid "no matching generation~%" msgstr "ingen matchende generation~%" -#: guix/scripts/package.scm:153 guix/scripts/package.scm:690 -#: guix/scripts/system.scm:593 +#: guix/scripts/package.scm:119 guix/scripts/package.scm:707 +#: guix/scripts/system.scm:622 #, scheme-format msgid "invalid syntax: ~a~%" msgstr "ugyldig syntaks: ~a~%" -#: guix/scripts/package.scm:182 +#: guix/scripts/package.scm:148 #, scheme-format msgid "nothing to be done~%" msgstr "intet at udføre~%" -#: guix/scripts/package.scm:196 +#: guix/scripts/package.scm:162 #, scheme-format msgid "~a package in profile~%" msgid_plural "~a packages in profile~%" msgstr[0] "~a pakke i profil~%" msgstr[1] "~a pakker i profil~%" -#: guix/scripts/package.scm:280 +#: guix/scripts/package.scm:248 #, scheme-format msgid "package '~a' no longer exists~%" msgstr "pakken »~a« findes ikke længere~%" -#: guix/scripts/package.scm:318 +#: guix/scripts/package.scm:286 #, scheme-format msgid "The following environment variable definitions may be needed:~%" msgstr "De følgende miljøvariabeldefinitioner kan være krævet:~%" -#: guix/scripts/package.scm:334 +#: guix/scripts/package.scm:305 msgid "" "Usage: guix package [OPTION]...\n" "Install, remove, or upgrade packages in a single transaction.\n" @@ -820,7 +836,7 @@ msgstr "" "Brug: guix-pakke [TILVALG] ... \n" "Installer, fjern eller opgrader pakker i en enkel transaktion.\n" -#: guix/scripts/package.scm:336 +#: guix/scripts/package.scm:307 msgid "" "\n" " -i, --install PACKAGE ...\n" @@ -830,7 +846,7 @@ msgstr "" " -i, --install PAKKE ...\n" " installer PAKKER" -#: guix/scripts/package.scm:339 +#: guix/scripts/package.scm:310 msgid "" "\n" " -e, --install-from-expression=EXP\n" @@ -840,7 +856,7 @@ msgstr "" " -e, --install-from-expression=UDTRYK\n" " installer pakken UDTRYK evaluerer til" -#: guix/scripts/package.scm:342 +#: guix/scripts/package.scm:313 msgid "" "\n" " -f, --install-from-file=FILE\n" @@ -852,7 +868,7 @@ msgstr "" " installer pakken som koden i FIL evaluerer\n" " til" -#: guix/scripts/package.scm:346 +#: guix/scripts/package.scm:317 msgid "" "\n" " -r, --remove PACKAGE ...\n" @@ -862,7 +878,7 @@ msgstr "" " -r, --remove PAKKE ...\n" " fjern PAKKER" -#: guix/scripts/package.scm:349 +#: guix/scripts/package.scm:320 msgid "" "\n" " -u, --upgrade[=REGEXP] upgrade all the installed packages matching REGEXP" @@ -872,7 +888,7 @@ msgstr "" " opgrader alle de installerede pakker der matcher\n" " REGUDTRYK" -#: guix/scripts/package.scm:351 +#: guix/scripts/package.scm:322 msgid "" "\n" " -m, --manifest=FILE create a new profile generation with the manifest\n" @@ -882,7 +898,7 @@ msgstr "" " -m, --manifest=FIL opret en ny profiloprettelse med manifestet fra\n" " FIL" -#: guix/scripts/package.scm:354 +#: guix/scripts/package.scm:325 msgid "" "\n" " --do-not-upgrade[=REGEXP] do not upgrade any packages matching REGEXP" @@ -890,7 +906,7 @@ msgstr "" "\n" " --do-not-upgrade[=REGUDTRYK] opgrader ikke pakker der matcher REGUDTRYK" -#: guix/scripts/package.scm:356 +#: guix/scripts/package.scm:327 msgid "" "\n" " --roll-back roll back to the previous generation" @@ -898,7 +914,7 @@ msgstr "" "\n" " --roll-back rul tilbage til den forrige generation" -#: guix/scripts/package.scm:358 +#: guix/scripts/package.scm:329 msgid "" "\n" " --search-paths[=KIND]\n" @@ -908,7 +924,7 @@ msgstr "" " --search-paths[=KIND]\n" " vis krævede miljøvariabeldefinitioner" -#: guix/scripts/package.scm:361 guix/scripts/pull.scm:113 +#: guix/scripts/package.scm:332 guix/scripts/pull.scm:84 msgid "" "\n" " -l, --list-generations[=PATTERN]\n" @@ -918,7 +934,7 @@ msgstr "" " -l, --list-generations[=MØNSTER]\n" " vis generationer der matcher MØNSTER" -#: guix/scripts/package.scm:364 +#: guix/scripts/package.scm:335 msgid "" "\n" " -d, --delete-generations[=PATTERN]\n" @@ -928,7 +944,7 @@ msgstr "" " -d, --delete-generations[=MØNSTER]\n" " slet generationer der matcher MØNSTER" -#: guix/scripts/package.scm:367 +#: guix/scripts/package.scm:338 msgid "" "\n" " -S, --switch-generation=PATTERN\n" @@ -938,7 +954,7 @@ msgstr "" " -S, --switch-generation=MØNSTER\n" " skift til et generationsmatchende MØNSTER" -#: guix/scripts/package.scm:370 +#: guix/scripts/package.scm:341 msgid "" "\n" " -p, --profile=PROFILE use PROFILE instead of the user's default profile" @@ -946,7 +962,7 @@ msgstr "" "\n" " -p, --profile=PROFIL brug PROFIL i stedet for brugerens standardprofil" -#: guix/scripts/package.scm:373 +#: guix/scripts/package.scm:344 msgid "" "\n" " --allow-collisions do not treat collisions in the profile as an error" @@ -954,7 +970,7 @@ msgstr "" "\n" " --allow-collisions opfat ikke kollisioner i profilen som en fejl" -#: guix/scripts/package.scm:375 +#: guix/scripts/package.scm:346 msgid "" "\n" " --bootstrap use the bootstrap Guile to build the profile" @@ -962,7 +978,7 @@ msgstr "" "\n" " --bootstrap brug bootstrap Guile til at kompilere profilen" -#: guix/scripts/package.scm:377 guix/scripts/pull.scm:105 +#: guix/scripts/package.scm:348 guix/scripts/pull.scm:74 msgid "" "\n" " --verbose produce verbose output" @@ -970,7 +986,7 @@ msgstr "" "\n" " --verbose lav uddybende uddata" -#: guix/scripts/package.scm:380 +#: guix/scripts/package.scm:351 msgid "" "\n" " -s, --search=REGEXP search in synopsis and description using REGEXP" @@ -978,7 +994,7 @@ msgstr "" "\n" " -s, --search=REGUDTRYK søg i synopsis og beskrivelse via REGUDTRYK" -#: guix/scripts/package.scm:382 +#: guix/scripts/package.scm:353 msgid "" "\n" " -I, --list-installed[=REGEXP]\n" @@ -988,7 +1004,7 @@ msgstr "" " -I, --list-installed[=REGUDTRYK]\n" " vis installerede pakker der matcher REGUDTRYK" -#: guix/scripts/package.scm:385 +#: guix/scripts/package.scm:356 msgid "" "\n" " -A, --list-available[=REGEXP]\n" @@ -998,7 +1014,7 @@ msgstr "" " -A, --list-available[=REGUDTRYK]\n" " vis tilgængelige pakker der matcher REGUDTRYK" -#: guix/scripts/package.scm:388 +#: guix/scripts/package.scm:359 msgid "" "\n" " --show=PACKAGE show details about PACKAGE" @@ -1006,32 +1022,37 @@ msgstr "" "\n" " --show=PACKAGE vis detaljer om PAKKE" -#: guix/scripts/package.scm:440 +#: guix/scripts/package.scm:411 #, scheme-format msgid "upgrade regexp '~a' looks like a command-line option~%" msgstr "opgradering af regulært udtryk »~a« ligner et tilvalg for kommandolinjen~%" -#: guix/scripts/package.scm:443 +#: guix/scripts/package.scm:414 #, scheme-format msgid "is this intended?~%" msgstr "er dette med vilje?~%" -#: guix/scripts/package.scm:488 +#: guix/scripts/package.scm:459 #, scheme-format msgid "~a: unsupported kind of search path~%" msgstr "~a: ikke understøttet type af søgesti%" -#: guix/scripts/package.scm:789 +#: guix/scripts/package.scm:776 +#, scheme-format +msgid "~a~@[@~a~]: package not found~%" +msgstr "~a~@[@~a~]: pakke blev ikke fundet~%" + +#: guix/scripts/package.scm:810 #, scheme-format msgid "cannot switch to generation '~a'~%" msgstr "kan ikke skifte til generation »~a«~%" -#: guix/scripts/package.scm:806 +#: guix/scripts/package.scm:827 #, scheme-format msgid "would install new manifest from '~a' with ~d entries~%" msgstr "vil installere nyt manifest fra »~a« med ~d poster~%" -#: guix/scripts/package.scm:808 +#: guix/scripts/package.scm:829 #, scheme-format msgid "installing new manifest from '~a' with ~d entries~%" msgstr "installerer nyt manifest fra »~a« med ~d poster~%" @@ -1165,12 +1186,12 @@ msgid "invalid amount of storage: ~a~%" msgstr "ugyldig lagermængde: ~a~%" #: guix/scripts/gc.scm:202 -msgid "already ~h bytes available on ~a, nothing to do~%" -msgstr "der er allerede ~h byte tilgængelige på ~a, intet at udføre~%" +msgid "already ~h MiBs available on ~a, nothing to do~%" +msgstr "der er allerede ~h MiBs tilgængelige på ~a, intet at udføre~%" #: guix/scripts/gc.scm:205 -msgid "freeing ~h bytes~%" -msgstr "frigiver ~h byte~%" +msgid "freeing ~h MiBs~%" +msgstr "frigiver ~h MiBs~%" #: guix/scripts/gc.scm:217 #, scheme-format @@ -1178,10 +1199,10 @@ msgid "extraneous arguments: ~{~a ~}~%" msgstr "uvedkommende argumenter: ~{~a ~}~%" #: guix/scripts/gc.scm:237 guix/scripts/gc.scm:240 -msgid "freed ~h bytes~%" -msgstr "frigav ~h byte~%" +msgid "freed ~h MiBs~%" +msgstr "frigav ~h MiBs~%" -#: guix/scripts/hash.scm:47 +#: guix/scripts/hash.scm:48 msgid "" "Usage: guix hash [OPTION] FILE\n" "Return the cryptographic hash of FILE.\n" @@ -1195,7 +1216,7 @@ msgstr "" "Understøttede formater: »nix-base32« (standard), »base32« og »base16« (»hex«\n" "og »hexadecimal« kan også bruges).\n" -#: guix/scripts/hash.scm:52 +#: guix/scripts/hash.scm:53 msgid "" "\n" " -x, --exclude-vcs exclude version control directories" @@ -1203,7 +1224,7 @@ msgstr "" "\n" " -x, --exclude-vcs ekskluder versionskontrolmapper" -#: guix/scripts/hash.scm:56 +#: guix/scripts/hash.scm:57 msgid "" "\n" " -r, --recursive compute the hash on FILE recursively" @@ -1211,18 +1232,18 @@ msgstr "" "\n" " -r, --recursive beregn hashen på FIL rekursivt" -#: guix/scripts/hash.scm:150 guix/ui.scm:365 guix/ui.scm:706 guix/ui.scm:759 +#: guix/scripts/hash.scm:151 guix/ui.scm:371 guix/ui.scm:728 guix/ui.scm:781 #, scheme-format msgid "~a~%" msgstr "~a~%" -#: guix/scripts/hash.scm:153 guix/scripts/system.scm:1161 -#: guix/scripts/system.scm:1170 guix/scripts/system.scm:1177 +#: guix/scripts/hash.scm:154 guix/scripts/system.scm:1189 +#: guix/scripts/system.scm:1198 guix/scripts/system.scm:1205 #, scheme-format msgid "wrong number of arguments~%" msgstr "forkert antal argumenter~%" -#: guix/scripts/import.scm:86 +#: guix/scripts/import.scm:87 msgid "" "Usage: guix import IMPORTER ARGS ...\n" "Run IMPORTER with ARGS.\n" @@ -1230,21 +1251,21 @@ msgstr "" "Brug: guix import IMPORTER ARG ...\n" "Kør IMPORTER med ARG.\n" -#: guix/scripts/import.scm:89 +#: guix/scripts/import.scm:90 msgid "IMPORTER must be one of the importers listed below:\n" msgstr "IMPORTER skal være en af importørerne vist nedenfor:\n" -#: guix/scripts/import.scm:103 +#: guix/scripts/import.scm:104 #, scheme-format msgid "guix import: missing importer name~%" msgstr "guix import: mangler importørnavn~%" -#: guix/scripts/import.scm:123 +#: guix/scripts/import.scm:124 #, scheme-format msgid "'~a' import failed~%" msgstr "import af »~a« mislykkedes~%" -#: guix/scripts/import.scm:124 +#: guix/scripts/import.scm:125 #, scheme-format msgid "~a: invalid importer~%" msgstr "~a: ugyldigt importprogram~%" @@ -1265,17 +1286,25 @@ msgstr "" "\n" " -a, --archive=ARKIV angiv arkivet" -#: guix/scripts/import/cran.scm:110 +#: guix/scripts/import/cran.scm:49 +msgid "" +"\n" +" -r, --recursive import packages recursively" +msgstr "" +"\n" +" -r, --recursive importer pakker rekursivt" + +#: guix/scripts/import/cran.scm:112 #, scheme-format msgid "failed to download description for package '~a'~%" msgstr "kunne ikke hente beskrivelse for pakke »~a«:~%" -#: guix/scripts/import/cran.scm:114 guix/scripts/import/elpa.scm:113 +#: guix/scripts/import/cran.scm:116 guix/scripts/import/elpa.scm:113 #, scheme-format msgid "too few arguments~%" msgstr "for få argumenter~%" -#: guix/scripts/import/cran.scm:116 guix/scripts/import/elpa.scm:115 +#: guix/scripts/import/cran.scm:118 guix/scripts/import/elpa.scm:115 #, scheme-format msgid "too many arguments~%" msgstr "for mange argumenter~%" @@ -1325,26 +1354,7 @@ msgstr "" msgid "failed to download package '~a'~%" msgstr "kunne ikke hente pakken »~a«:~%" -#: guix/scripts/pull.scm:66 -#, scheme-format -msgid "" -"Guile-Git is missing but it is now required by 'guix pull'.\n" -"Install it by running:\n" -"\n" -" guix package -i ~a\n" -" export GUILE_LOAD_PATH=$HOME/.guix-profile/share/guile/site/~a:$GUILE_LOAD_PATH\n" -" export GUILE_LOAD_COMPILED_PATH=$HOME/.guix-profile/lib/guile/~a/site-ccache:$GUILE_LOAD_COMPILED_PATH\n" -"\n" -msgstr "" -"Guile-Git mangler men er nu krævet af »guix pull«.\n" -"Installer den ved at køre:\n" -"\n" -" guix package -i ~a\n" -" export GUILE_LOAD_PATH=$HOME/.guix-profile/share/guile/site/~a:$GUILE_LOAD_PATH\n" -" export GUILE_LOAD_COMPILED_PATH=$HOME/.guix-profile/lib/guile/~a/site-ccache:$GUILE_LOAD_COMPILED_PATH\n" -"\n" - -#: guix/scripts/pull.scm:103 +#: guix/scripts/pull.scm:72 msgid "" "Usage: guix pull [OPTION]...\n" "Download and deploy the latest version of Guix.\n" @@ -1352,7 +1362,15 @@ msgstr "" "Brug: guix pull [TILVALG]...\n" "Hent og udrul den seneste version af Guix.\n" -#: guix/scripts/pull.scm:107 +#: guix/scripts/pull.scm:76 +msgid "" +"\n" +" -C, --channels=FILE deploy the channels defined in FILE" +msgstr "" +"\n" +" -C, --channels=FILE udrul kanalerne defineret i FIL" + +#: guix/scripts/pull.scm:78 msgid "" "\n" " --url=URL download from the Git repository at URL" @@ -1360,7 +1378,7 @@ msgstr "" "\n" " --url=URL hent fra Git-arkivet på URL (ADRESSE)" -#: guix/scripts/pull.scm:109 +#: guix/scripts/pull.scm:80 msgid "" "\n" " --commit=COMMIT download the specified COMMIT" @@ -1368,7 +1386,7 @@ msgstr "" "\n" " --commit=COMMIT hent den angivne COMMIT (INDSENDELSE)" -#: guix/scripts/pull.scm:111 +#: guix/scripts/pull.scm:82 msgid "" "\n" " --branch=BRANCH download the tip of the specified BRANCH" @@ -1376,7 +1394,24 @@ msgstr "" "\n" " --branch=BRANCH hent toppen af den angivne BRANCH (GREN)" -#: guix/scripts/pull.scm:116 +#: guix/scripts/pull.scm:87 +#, scheme-format +msgid "" +"\n" +" -p, --profile=PROFILE use PROFILE instead of ~/.config/guix/current" +msgstr "" +"\n" +" -p, --profile=PROFIL brug PROFIL i stedet for ~/.config/guix/current" + +#: guix/scripts/pull.scm:89 +msgid "" +"\n" +" -n, --dry-run show what would be pulled and built" +msgstr "" +"\n" +" -n, --dry-run vis hvad der hentes og bygges" + +#: guix/scripts/pull.scm:91 msgid "" "\n" " --bootstrap use the bootstrap Guile to build the new Guix" @@ -1384,157 +1419,189 @@ msgstr "" "\n" " --bootstrap brug bootstrap Guile til at kompilere den nye Guix" -#: guix/scripts/pull.scm:263 -#, scheme-format -msgid "cannot enforce use of the Let's Encrypt certificates~%" -msgstr "kan ikke gennemtvinge brugen af Let's Encrypt-certifikater~%" +#: guix/scripts/pull.scm:165 +msgid "New in this revision:\n" +msgstr "Nyt i denne revision:\n" -#: guix/scripts/pull.scm:265 -#, scheme-format -msgid "please upgrade Guile-Git~%" -msgstr "opgrader venligst Guile-Git~%" - -#: guix/scripts/pull.scm:273 +#: guix/scripts/pull.scm:223 #, scheme-format msgid "Git error ~a~%" msgstr "Git-fejl: ~a~%" -#: guix/scripts/pull.scm:275 +#: guix/scripts/pull.scm:225 #, scheme-format msgid "Git error: ~a~%" msgstr "Git-fejl: ~a~%" -#: guix/scripts/pull.scm:302 +#: guix/scripts/pull.scm:250 +#, scheme-format +msgid "Migrating profile generations to '~a'...~%" +msgstr "Migrerer profiloprettelser til »~a«...~%" + +#: guix/scripts/pull.scm:285 +#, scheme-format +msgid "while creating symlink '~a': ~a~%" +msgstr "under oprettelse af symbolsk henvisning »~a«: ~a%" + +#: guix/scripts/pull.scm:307 #, scheme-format msgid " repository URL: ~a~%" msgstr " arkiv-URL: ~a~%" -#: guix/scripts/pull.scm:304 +#: guix/scripts/pull.scm:309 #, scheme-format msgid " branch: ~a~%" msgstr " gren: ~a~%" -#: guix/scripts/pull.scm:305 +#: guix/scripts/pull.scm:310 #, scheme-format msgid " commit: ~a~%" msgstr " commit: ~a~%" -#: guix/scripts/pull.scm:373 -#, scheme-format -msgid "Updating from Git repository at '~a'...~%" -msgstr "Opdaterer fra Git-arkiv på »~a«...~%" +#: guix/scripts/pull.scm:376 +msgid " ~h new package: ~a~%" +msgid_plural " ~h new packages: ~a~%" +msgstr[0] " ~h: ny pakke: ~a~%" +msgstr[1] " ~h: nye pakker ~a~%" -#: guix/scripts/pull.scm:383 -#, scheme-format -msgid "Building from Git commit ~a...~%" -msgstr "Kompilerer fra Git commit ~a...~%" +#: guix/scripts/pull.scm:387 +msgid " ~h package upgraded: ~a~%" +msgid_plural " ~h packages upgraded: ~a~%" +msgstr[0] " ~h pakke opgraderet: ~a~%" +msgstr[1] " ~h pakker opgraderet: ~a~%" -#: guix/scripts/substitute.scm:125 +#: guix/scripts/pull.scm:451 +#, scheme-format +msgid "'~a' did not return a list of channels~%" +msgstr "»~a« returnerede ikke en kanalliste~%" + +#: guix/scripts/pull.scm:465 +#, scheme-format +msgid "" +"The 'GUIX_PULL_URL' environment variable is deprecated.\n" +"Use '~/.config/guix/channels.scm' instead." +msgstr "" +"Miljøvariablen »GUIX_PULL_URL« er forældet.\n" +"Brug »~/.config/guix/channels.scm« i stedet for." + +#: guix/scripts/pull.scm:490 +#, scheme-format +msgid "'--url', '--commit', and '--branch' are not applicable~%" +msgstr "»--url«, »--commit« og »--branch« kan ikke anvendes~%" + +#: guix/scripts/pull.scm:515 +#, scheme-format +msgid "Building from this channel:~%" +msgid_plural "Building from these channels:~%" +msgstr[0] "Kompilerer fra denne kanal:~%" +msgstr[1] "Kompilerer fra disse kanaler:~%" + +#: guix/scripts/substitute.scm:126 #, scheme-format msgid "authentication and authorization of substitutes disabled!~%" msgstr "godkendelse og autorisation af substitutter er deaktiveret!~%" -#: guix/scripts/substitute.scm:200 +#: guix/scripts/substitute.scm:201 #, scheme-format msgid "download from '~a' failed: ~a, ~s~%" msgstr "hent fra »~a« mislykkedes: ~a, ~s~%" -#: guix/scripts/substitute.scm:213 +#: guix/scripts/substitute.scm:214 #, scheme-format msgid "while fetching ~a: server is somewhat slow~%" msgstr "under overførsel af ~a: server er noget langsom~%" -#: guix/scripts/substitute.scm:215 +#: guix/scripts/substitute.scm:216 #, scheme-format msgid "try `--no-substitutes' if the problem persists~%" msgstr "prøv »--no-substitutes« hvis problemet fortsætter~%" -#: guix/scripts/substitute.scm:225 +#: guix/scripts/substitute.scm:226 #, scheme-format msgid "unsupported substitute URI scheme: ~a~%" msgstr "ikke understøttet substitut-URI-skema: ~a~%" -#: guix/scripts/substitute.scm:260 +#: guix/scripts/substitute.scm:261 #, scheme-format msgid "while fetching '~a': ~a (~s)~%" msgstr "under overførsel af »~a«: ~a (~s)~%" -#: guix/scripts/substitute.scm:265 +#: guix/scripts/substitute.scm:266 #, scheme-format msgid "ignoring substitute server at '~s'~%" msgstr "ignorerer substitutserver »~s«~%" -#: guix/scripts/substitute.scm:315 +#: guix/scripts/substitute.scm:316 #, scheme-format msgid "signature version must be a number: ~s~%" msgstr "signaturversion skal være et nummer: ~s~%" -#: guix/scripts/substitute.scm:319 +#: guix/scripts/substitute.scm:320 #, scheme-format msgid "unsupported signature version: ~a~%" msgstr "signaturversion er ikke understøttet: ~a~%" -#: guix/scripts/substitute.scm:327 +#: guix/scripts/substitute.scm:328 #, scheme-format msgid "signature is not a valid s-expression: ~s~%" msgstr "signatur er ikke et gyldigt s-udtryk: ~s~%" -#: guix/scripts/substitute.scm:331 +#: guix/scripts/substitute.scm:332 #, scheme-format msgid "invalid format of the signature field: ~a~%" msgstr "ugyldigt format for signaturfeltet: ~a~%" -#: guix/scripts/substitute.scm:366 +#: guix/scripts/substitute.scm:367 #, scheme-format msgid "invalid signature for '~a'~%" msgstr "ugyldig signatur for »~a«~%" -#: guix/scripts/substitute.scm:368 +#: guix/scripts/substitute.scm:369 #, scheme-format msgid "hash mismatch for '~a'~%" msgstr "hash mismatch for »~a«~%" -#: guix/scripts/substitute.scm:370 +#: guix/scripts/substitute.scm:371 #, scheme-format msgid "'~a' is signed with an unauthorized key~%" msgstr "»~a« er underskrevet med en uautoriseret nøgle~%" -#: guix/scripts/substitute.scm:372 +#: guix/scripts/substitute.scm:373 #, scheme-format msgid "signature on '~a' is corrupt~%" msgstr "signatur på »~a« er ødelagt~%" -#: guix/scripts/substitute.scm:457 +#: guix/scripts/substitute.scm:458 #, scheme-format msgid "'~a' does not name a store item~%" msgstr "»~a« nævner ikke et lagerelement~%" -#: guix/scripts/substitute.scm:619 +#: guix/scripts/substitute.scm:620 #, scheme-format msgid "updating substitutes from '~a'... ~5,1f%" msgstr "opdaterer substitutter fra »~a«... ~5,1f%" -#: guix/scripts/substitute.scm:683 +#: guix/scripts/substitute.scm:684 #, scheme-format msgid "~s: unsupported server URI scheme~%" msgstr "~s: ikke understøttet server-URI-skema~%" -#: guix/scripts/substitute.scm:693 +#: guix/scripts/substitute.scm:694 #, scheme-format msgid "'~a' uses different store '~a'; ignoring it~%" msgstr "»~a« bruger et andet lager »~a«; ignorerer~%" -#: guix/scripts/substitute.scm:853 +#: guix/scripts/substitute.scm:863 #, scheme-format msgid "host name lookup error: ~a~%" msgstr "opslagsfejl for værtsnavn: ~a~%" -#: guix/scripts/substitute.scm:858 +#: guix/scripts/substitute.scm:868 #, scheme-format msgid "TLS error in procedure '~a': ~a~%" msgstr "TLS-fejl i proceduren »~a«: ~a~%" -#: guix/scripts/substitute.scm:869 +#: guix/scripts/substitute.scm:879 msgid "" "Usage: guix substitute [OPTION]...\n" "Internal tool to substitute a pre-built binary to a local build.\n" @@ -1542,7 +1609,7 @@ msgstr "" "Brug: guix substitute [TILVALG] ...\n" "Internt værktøj til at erstatte en prækompileret binær fil med en lokal kompilering.\n" -#: guix/scripts/substitute.scm:871 +#: guix/scripts/substitute.scm:881 msgid "" "\n" " --query report on the availability of substitutes for the\n" @@ -1552,7 +1619,7 @@ msgstr "" " --query rapport om tilgængeligheden for substitutter for\n" " lagerfilnavnene sendt til standardind" -#: guix/scripts/substitute.scm:874 +#: guix/scripts/substitute.scm:884 msgid "" "\n" " --substitute STORE-FILE DESTINATION\n" @@ -1564,26 +1631,26 @@ msgstr "" " hent LAGER-FIL og lagr den som en Nar i filen\n" " DESTINATION" -#: guix/scripts/substitute.scm:939 +#: guix/scripts/substitute.scm:949 #, scheme-format msgid "no valid substitute for '~a'~%" msgstr "ingen gyldig substitut for »~a«~%" -#: guix/scripts/substitute.scm:946 +#: guix/scripts/substitute.scm:957 #, scheme-format msgid "Downloading ~a...~%" msgstr "Henter ~a...~%" -#: guix/scripts/substitute.scm:1002 +#: guix/scripts/substitute.scm:1019 msgid "ACL for archive imports seems to be uninitialized, substitutes may be unavailable\n" msgstr "ACL for arkivimporter ser ikke ud til at være initialiseret, substitutter kan være utilgængelige\n" -#: guix/scripts/substitute.scm:1056 +#: guix/scripts/substitute.scm:1073 #, scheme-format msgid "~a: invalid URI~%" msgstr "~a: ugyldig URI~%" -#: guix/scripts/substitute.scm:1116 +#: guix/scripts/substitute.scm:1144 #, scheme-format msgid "~a: unrecognized options~%" msgstr "~a: ikke genkendte tilvalg~%" @@ -1622,111 +1689,120 @@ msgstr "" msgid "wrong arguments" msgstr "forkerte argumenter" -#: guix/scripts/system.scm:143 +#: guix/scripts/system.scm:148 #, scheme-format msgid "failed to register '~a' under '~a'~%" msgstr "kunne ikke registrere »~a« under »~a«~%" -#: guix/scripts/system.scm:154 +#: guix/scripts/system.scm:163 #, scheme-format msgid "copying to '~a'..." msgstr "kopierer til »~a«..." -#: guix/scripts/system.scm:189 +#: guix/scripts/system.scm:204 #, scheme-format msgid "failed to install bootloader ~a~%" msgstr "kunne ikke installere opstartsindlæseren ~a~%" -#: guix/scripts/system.scm:209 +#: guix/scripts/system.scm:224 #, scheme-format msgid "initializing the current root file system~%" msgstr "initialiserer det nuværende root-filsystem~%" -#: guix/scripts/system.scm:223 +#: guix/scripts/system.scm:238 #, scheme-format msgid "not running as 'root', so the ownership of '~a' may be incorrect!~%" msgstr "kører ikke som »root«, så ejerskabet af »~a« kan være forkert!~%" -#: guix/scripts/system.scm:268 +#: guix/scripts/system.scm:290 #, scheme-format msgid "while talking to shepherd: ~a~%" msgstr "under kommunikation med shepherd: ~a~%" -#: guix/scripts/system.scm:275 +#: guix/scripts/system.scm:297 #, scheme-format msgid "service '~a' could not be found~%" msgstr "tjensten »~a« blev ikke fundet~%" -#: guix/scripts/system.scm:278 +#: guix/scripts/system.scm:300 #, scheme-format msgid "service '~a' does not have an action '~a'~%" msgstr "tjenesten »~a« har ikke en handling »~a«~%" -#: guix/scripts/system.scm:282 +#: guix/scripts/system.scm:304 #, scheme-format msgid "exception caught while executing '~a' on service '~a':~%" msgstr "undtagelse fanget under kørsel af »~a« på tjenesten »~a«:~%" -#: guix/scripts/system.scm:290 +#: guix/scripts/system.scm:312 #, scheme-format msgid "something went wrong: ~s~%" msgstr "noget gik galt: ~s~%" -#: guix/scripts/system.scm:293 +#: guix/scripts/system.scm:315 #, scheme-format msgid "shepherd error~%" msgstr "shepherd-fejl~%" -#: guix/scripts/system.scm:310 +#: guix/scripts/system.scm:332 #, scheme-format msgid "failed to obtain list of shepherd services~%" msgstr "kunne ikke indhente liste over shepherd-tjenester~%" -#: guix/scripts/system.scm:330 +#: guix/scripts/system.scm:352 #, scheme-format msgid "unloading service '~a'...~%" msgstr "afslutter tjeneste »~a« ...~%" -#: guix/scripts/system.scm:338 +#: guix/scripts/system.scm:361 #, scheme-format msgid "loading new services:~{ ~a~}...~%" msgstr "indlæser nye tjenester:~{ ~a~}...~%" -#: guix/scripts/system.scm:364 +#: guix/scripts/system.scm:366 +msgid "" +"To complete the upgrade, run 'herd restart SERVICE' to stop,\n" +"upgrade, and restart each service that was not automatically restarted.\n" +msgstr "" +"For at fuldføre opgraderingen, kør »herd restart SERVICE« for at\n" +"stoppe og genstarte hver tjeneste, der ikke blev genstartet\n" +"automatisk.\n" + +#: guix/scripts/system.scm:393 #, scheme-format msgid "activating system...~%" msgstr "aktiverer system ...~%" -#: guix/scripts/system.scm:442 +#: guix/scripts/system.scm:471 #, scheme-format msgid "cannot switch to system generation '~a'~%" msgstr "kan ikke skifte til systemoprettelse »~a«~%" -#: guix/scripts/system.scm:513 +#: guix/scripts/system.scm:542 msgid "the DAG of services" msgstr "DAGen for tjenester" -#: guix/scripts/system.scm:526 +#: guix/scripts/system.scm:555 msgid "the dependency graph of shepherd services" msgstr "afhængighedsgrafen for shepherd-tjenester" -#: guix/scripts/system.scm:550 +#: guix/scripts/system.scm:579 #, scheme-format msgid " file name: ~a~%" msgstr " filnavn: ~a~%" -#: guix/scripts/system.scm:551 +#: guix/scripts/system.scm:580 #, scheme-format msgid " canonical file name: ~a~%" msgstr " kanonisk filnavn: ~a~%" #. TRANSLATORS: Please preserve the two-space indentation. -#: guix/scripts/system.scm:553 +#: guix/scripts/system.scm:582 #, scheme-format msgid " label: ~a~%" msgstr " etikelt: ~a~%" -#: guix/scripts/system.scm:554 +#: guix/scripts/system.scm:583 #, scheme-format msgid " bootloader: ~a~%" msgstr " opstartsindlæser: ~a~%" @@ -1739,22 +1815,22 @@ msgstr " opstartsindlæser: ~a~%" #. root device: label: "my-root" #. or just: #. root device: /dev/sda3 -#: guix/scripts/system.scm:564 +#: guix/scripts/system.scm:593 #, scheme-format msgid " root device: ~[UUID: ~a~;label: ~s~;~a~]~%" msgstr " root-enhed: ~[UUID: ~a~;etiket: ~s~;~a~]~%" -#: guix/scripts/system.scm:575 +#: guix/scripts/system.scm:604 #, scheme-format msgid " kernel: ~a~%" msgstr " kerne: ~a~%" -#: guix/scripts/system.scm:646 +#: guix/scripts/system.scm:675 #, scheme-format msgid "~a: error: device '~a' not found: ~a~%" msgstr "~a: fejl: enheden »~a« blev ikke fundet: ~a~%" -#: guix/scripts/system.scm:650 +#: guix/scripts/system.scm:679 #, scheme-format msgid "" "If '~a' is a file system\n" @@ -1763,37 +1839,37 @@ msgstr "" "Hvis »~a« er en filsystemetiket,\n" "skal du skrive @code{(file-system-label ~s)} i dit @code{device}-felt." -#: guix/scripts/system.scm:658 +#: guix/scripts/system.scm:687 #, scheme-format msgid "~a: error: file system with label '~a' not found~%" msgstr "~a: fejl: filsystem med etiketten »~a« blev ikke fundet~%" -#: guix/scripts/system.scm:663 +#: guix/scripts/system.scm:692 #, scheme-format msgid "~a: error: file system with UUID '~a' not found~%" msgstr "~a: fejl: filsystem med UUID »~a« blev ikke fundet~%" -#: guix/scripts/system.scm:764 +#: guix/scripts/system.scm:793 #, scheme-format msgid "~a not found: 'guix pull' was never run~%" msgstr "~a blev ikke fundet: »guix pull« blev aldrig kørt~%" -#: guix/scripts/system.scm:765 +#: guix/scripts/system.scm:794 #, scheme-format msgid "Consider running 'guix pull' before 'reconfigure'.~%" msgstr "Tag i betragtning at køre »guix pull« før »reconfigure«.~%" -#: guix/scripts/system.scm:766 +#: guix/scripts/system.scm:795 #, scheme-format msgid "Failing to do that may downgrade your system!~%" msgstr "Hvis dette ikke gøres, kan dit system blive nedgraderet!~%" -#: guix/scripts/system.scm:883 +#: guix/scripts/system.scm:907 #, scheme-format msgid "initializing operating system under '~a'...~%" msgstr "initialiserer operativsystem under »~a«...~%" -#: guix/scripts/system.scm:928 +#: guix/scripts/system.scm:952 msgid "" "Usage: guix system [OPTION ...] ACTION [ARG ...] [FILE]\n" "Build the operating system declared in FILE according to ACTION.\n" @@ -1803,67 +1879,67 @@ msgstr "" "Kompiler operativsystemet erklæret i FIL jævnfør HANDLING.\n" "Nogle HANDLINGER understøtter yderligere ARGUMENTER.\n" -#: guix/scripts/system.scm:932 guix/scripts/container.scm:28 +#: guix/scripts/system.scm:956 guix/scripts/container.scm:29 msgid "The valid values for ACTION are:\n" msgstr "De gyldige værdier for HANDLING er:\n" -#: guix/scripts/system.scm:934 +#: guix/scripts/system.scm:958 msgid " search search for existing service types\n" msgstr " search søg efter eksisterende tjenestetyper\n" -#: guix/scripts/system.scm:936 +#: guix/scripts/system.scm:960 msgid " reconfigure switch to a new operating system configuration\n" msgstr " reconfigure skift til en ny operativsystemkonfiguration\n" -#: guix/scripts/system.scm:938 +#: guix/scripts/system.scm:962 msgid " roll-back switch to the previous operating system configuration\n" msgstr " roll-back skift til den forrige operativsystemkonfiguration\n" -#: guix/scripts/system.scm:940 +#: guix/scripts/system.scm:964 msgid " switch-generation switch to an existing operating system configuration\n" msgstr " switch-generation skift til en eksisterende operativsystemkonfiguration\n" -#: guix/scripts/system.scm:942 +#: guix/scripts/system.scm:966 msgid " list-generations list the system generations\n" msgstr " list-generations viser systemoprettelserne\n" -#: guix/scripts/system.scm:944 +#: guix/scripts/system.scm:968 msgid " build build the operating system without installing anything\n" msgstr " build kompiler operativsystemet uden at installere noget\n" -#: guix/scripts/system.scm:946 +#: guix/scripts/system.scm:970 msgid " container build a container that shares the host's store\n" msgstr " container kompiler en container som deler værtens lager\n" -#: guix/scripts/system.scm:948 +#: guix/scripts/system.scm:972 msgid " vm build a virtual machine image that shares the host's store\n" msgstr " vm kompiler et virtuelt maskinaftryk som deler værtens lager\n" -#: guix/scripts/system.scm:950 +#: guix/scripts/system.scm:974 msgid " vm-image build a freestanding virtual machine image\n" msgstr " vm-image kompiler et fritstående virtuelt maskinaftryk\n" -#: guix/scripts/system.scm:952 +#: guix/scripts/system.scm:976 msgid " disk-image build a disk image, suitable for a USB stick\n" msgstr " disk-image kompiler et diskaftryk, som egner sig til et USB-drev\n" -#: guix/scripts/system.scm:954 +#: guix/scripts/system.scm:978 msgid " docker-image build a Docker image\n" msgstr " docker-image kompiler et Dockeraftryk\n" -#: guix/scripts/system.scm:956 +#: guix/scripts/system.scm:980 msgid " init initialize a root file system to run GNU\n" msgstr " init initialiser et rootfilsystem til at køre GNU.\n" -#: guix/scripts/system.scm:958 +#: guix/scripts/system.scm:982 msgid " extension-graph emit the service extension graph in Dot format\n" msgstr " extension-graph opret tjenesteudvidelsesgrafen i Dot-format\n" -#: guix/scripts/system.scm:960 +#: guix/scripts/system.scm:984 msgid " shepherd-graph emit the graph of shepherd services in Dot format\n" msgstr " shepherd-graph opret grafen for shepherd-tjenester i Dot-format\n" -#: guix/scripts/system.scm:964 +#: guix/scripts/system.scm:988 msgid "" "\n" " -d, --derivation return the derivation of the given system" @@ -1871,7 +1947,7 @@ msgstr "" "\n" " -d, --derivation returner de derivate stier for det givne system" -#: guix/scripts/system.scm:966 +#: guix/scripts/system.scm:990 msgid "" "\n" " -e, --expression=EXPR consider the operating-system EXPR evaluates to\n" @@ -1882,7 +1958,7 @@ msgstr "" " evaluerer til i stedet for at læse FIL, når\n" " anvendelig" -#: guix/scripts/system.scm:969 +#: guix/scripts/system.scm:993 msgid "" "\n" " --on-error=STRATEGY\n" @@ -1893,7 +1969,7 @@ msgstr "" " brug STRATEGI når den opstår en fejl under læsning\n" " af FIL" -#: guix/scripts/system.scm:972 +#: guix/scripts/system.scm:996 msgid "" "\n" " --file-system-type=TYPE\n" @@ -1905,7 +1981,7 @@ msgstr "" " for »disk-image«, lav et rodfilsystem med TYPE (typen)\n" " (enten »ext4« eller »iso9660«)" -#: guix/scripts/system.scm:976 +#: guix/scripts/system.scm:1000 msgid "" "\n" " --image-size=SIZE for 'vm-image', produce an image of SIZE" @@ -1913,7 +1989,7 @@ msgstr "" "\n" " --image-size=STR for »vm-image«, lav et aftryk af STR" -#: guix/scripts/system.scm:978 +#: guix/scripts/system.scm:1002 msgid "" "\n" " --no-bootloader for 'init', do not install a bootloader" @@ -1921,7 +1997,7 @@ msgstr "" "\n" " --no-bootloader for »init«, installer ikke en opstartsindlæser" -#: guix/scripts/system.scm:980 +#: guix/scripts/system.scm:1004 msgid "" "\n" " --share=SPEC for 'vm', share host file system according to SPEC" @@ -1929,7 +2005,7 @@ msgstr "" "\n" " --share=SPEC for »vm«, del værtsfilsystem jævnfør SPEC" -#: guix/scripts/system.scm:982 +#: guix/scripts/system.scm:1006 msgid "" "\n" " -r, --root=FILE for 'vm', 'vm-image', 'disk-image', 'container',\n" @@ -1942,7 +2018,7 @@ msgstr "" " resultatet, og registrer den som en\n" " affaldsindsamlerrod" -#: guix/scripts/system.scm:986 +#: guix/scripts/system.scm:1010 msgid "" "\n" " --expose=SPEC for 'vm', expose host file system according to SPEC" @@ -1950,7 +2026,7 @@ msgstr "" "\n" " --expose=SPEC for »vm«, fremvis værtsfilsystem jævnfør SPEC" -#: guix/scripts/system.scm:988 +#: guix/scripts/system.scm:1012 msgid "" "\n" " --full-boot for 'vm', make a full boot sequence" @@ -1958,7 +2034,7 @@ msgstr "" "\n" " --full-boot for »vm«, lav en fuld opstartssekvens" -#: guix/scripts/system.scm:990 +#: guix/scripts/system.scm:1014 msgid "" "\n" " --skip-checks skip file system and initrd module safety checks" @@ -1966,54 +2042,54 @@ msgstr "" "\n" " --skip-checks udelad sikkerhedskontrol af filsystem og initrd-modul" -#: guix/scripts/system.scm:1089 +#: guix/scripts/system.scm:1116 #, scheme-format msgid "both file and expression cannot be specified~%" msgstr "fil og udtryk kan ikke angives samtidigt~%" -#: guix/scripts/system.scm:1096 +#: guix/scripts/system.scm:1123 #, scheme-format msgid "no configuration specified~%" msgstr "ingen konfiguration angivet~%" -#: guix/scripts/system.scm:1196 +#: guix/scripts/system.scm:1224 #, scheme-format msgid "~a: unknown action~%" msgstr "~a: ukendt handling~%" -#: guix/scripts/system.scm:1212 +#: guix/scripts/system.scm:1240 #, scheme-format msgid "wrong number of arguments for action '~a'~%" msgstr "forkert antal argumenter for handling »~a«~%" -#: guix/scripts/system.scm:1217 +#: guix/scripts/system.scm:1245 #, scheme-format msgid "guix system: missing command name~%" msgstr "guix system: mangler kommandonavn~%" -#: guix/scripts/system.scm:1219 +#: guix/scripts/system.scm:1247 #, scheme-format msgid "Try 'guix system --help' for more information.~%" msgstr "Prøv »guix system --help« for yderligere information.~%" -#: guix/scripts/system/search.scm:88 guix/ui.scm:1162 guix/ui.scm:1176 +#: guix/scripts/system/search.scm:88 guix/ui.scm:1205 guix/ui.scm:1219 msgid "unknown" msgstr "ukendt" -#: guix/scripts/lint.scm:139 +#: guix/scripts/lint.scm:140 #, scheme-format msgid "Available checkers:~%" msgstr "Tilgængelige kontrolprogrammer:~%" -#: guix/scripts/lint.scm:163 +#: guix/scripts/lint.scm:164 msgid "description should not be empty" msgstr "beskrivelse skal være udfyldt" -#: guix/scripts/lint.scm:173 +#: guix/scripts/lint.scm:174 msgid "Texinfo markup in description is invalid" msgstr "Texinfo-opmærkning i beskrivelse er ugyldig" -#: guix/scripts/lint.scm:183 +#: guix/scripts/lint.scm:184 #, scheme-format msgid "" "description should not contain ~\n" @@ -2024,16 +2100,16 @@ msgstr "" #. TRANSLATORS: '@code' is Texinfo markup and must be kept #. as is. -#: guix/scripts/lint.scm:196 +#: guix/scripts/lint.scm:197 msgid "use @code or similar ornament instead of quotes" msgstr "brug @code eller lignende ornament i stedet for citationstegn" -#: guix/scripts/lint.scm:203 +#: guix/scripts/lint.scm:204 msgid "description should start with an upper-case letter or digit" msgstr "beskrivelse skal starte med et stort bogstav eller et tal" # arg, hvad foregår der her -#: guix/scripts/lint.scm:219 +#: guix/scripts/lint.scm:220 #, scheme-format msgid "" "sentences in description should be followed ~\n" @@ -2042,263 +2118,263 @@ msgstr "" "sætninger i beskrivelsen skal efterfølges ~\n" "af to mellemrum; mulig infraction~p ved ~{~a~^, ~}" -#: guix/scripts/lint.scm:237 +#: guix/scripts/lint.scm:238 #, scheme-format msgid "invalid description: ~s" msgstr "ugyldig beskrivelse: ~s" # native kan evt. være platformsspecifik # Det er dog svært at gætte med sikkerhed hvad det betyder her -#: guix/scripts/lint.scm:282 +#: guix/scripts/lint.scm:283 #, scheme-format msgid "'~a' should probably be a native input" msgstr "»~a« skal sandsynligvis være standarddata" -#: guix/scripts/lint.scm:298 +#: guix/scripts/lint.scm:299 #, scheme-format msgid "'~a' should probably not be an input at all" msgstr "»~a« skal sandsynligvis ikke være inddata" -#: guix/scripts/lint.scm:315 +#: guix/scripts/lint.scm:316 msgid "synopsis should not be empty" msgstr "synopsis skal være udfyldt" -#: guix/scripts/lint.scm:323 +#: guix/scripts/lint.scm:324 msgid "no period allowed at the end of the synopsis" msgstr "ingen periode er tilladt i slutningen af synopsen" -#: guix/scripts/lint.scm:335 +#: guix/scripts/lint.scm:336 msgid "no article allowed at the beginning of the synopsis" msgstr "ingen artikel er tilladt i begyndelsen af synopsen" -#: guix/scripts/lint.scm:342 +#: guix/scripts/lint.scm:343 msgid "synopsis should be less than 80 characters long" msgstr "synopsis skal være mindre end 80 tegn lang" -#: guix/scripts/lint.scm:348 +#: guix/scripts/lint.scm:349 msgid "synopsis should start with an upper-case letter or digit" msgstr "synopsis skal starte med et stort bogstav eller et tal" -#: guix/scripts/lint.scm:355 +#: guix/scripts/lint.scm:356 msgid "synopsis should not start with the package name" msgstr "synopsis skal ikke starte med pakkenavnet" -#: guix/scripts/lint.scm:365 +#: guix/scripts/lint.scm:366 msgid "Texinfo markup in synopsis is invalid" msgstr "Texinfo-opmærkning i synopsis er ugyldig" -#: guix/scripts/lint.scm:384 +#: guix/scripts/lint.scm:385 #, scheme-format msgid "invalid synopsis: ~s" msgstr "ugyldig synopsis: ~s" -#: guix/scripts/lint.scm:503 +#: guix/scripts/lint.scm:504 #, scheme-format msgid "URI ~a returned suspiciously small file (~a bytes)" msgstr "URI'en ~a returnerede mistænkelig lille fil (~a byte)" -#: guix/scripts/lint.scm:513 +#: guix/scripts/lint.scm:514 #, scheme-format msgid "permanent redirect from ~a to ~a" msgstr "permanent omdirigering fra ~a til ~a" -#: guix/scripts/lint.scm:520 +#: guix/scripts/lint.scm:521 #, scheme-format msgid "invalid permanent redirect from ~a" msgstr "ugyldig permanent omdirigering fra ~a" -#: guix/scripts/lint.scm:527 guix/scripts/lint.scm:539 +#: guix/scripts/lint.scm:528 guix/scripts/lint.scm:540 #, scheme-format msgid "URI ~a not reachable: ~a (~s)" msgstr "URI ~a kan ikke nås: ~a (~s)" -#: guix/scripts/lint.scm:546 +#: guix/scripts/lint.scm:547 #, scheme-format msgid "URI ~a domain not found: ~a" msgstr "URI ~a domæne blev ikke fundet: ~a" -#: guix/scripts/lint.scm:554 +#: guix/scripts/lint.scm:555 #, scheme-format msgid "URI ~a unreachable: ~a" msgstr "URI ~a kan ikke nås: ~a" -#: guix/scripts/lint.scm:563 +#: guix/scripts/lint.scm:564 #, scheme-format msgid "TLS certificate error: ~a" msgstr "TLS-certifikatfejl: ~a" -#: guix/scripts/lint.scm:584 +#: guix/scripts/lint.scm:585 msgid "invalid value for home page" msgstr "ugyldig værdi for hjemmeside" -#: guix/scripts/lint.scm:587 +#: guix/scripts/lint.scm:588 #, scheme-format msgid "invalid home page URL: ~s" msgstr "ugyldig hjemmesideadresse: ~s" -#: guix/scripts/lint.scm:613 +#: guix/scripts/lint.scm:614 msgid "file names of patches should start with the package name" msgstr "filnavn for rettelser skal starte med pakkenavnet" -#: guix/scripts/lint.scm:629 +#: guix/scripts/lint.scm:630 #, scheme-format msgid "~a: file name is too long" msgstr "~a: filnavnet er for langt" -#: guix/scripts/lint.scm:670 +#: guix/scripts/lint.scm:671 #, scheme-format msgid "~a: ~a: proposed synopsis: ~s~%" msgstr "~a: ~a: foreslået synopsis: ~s~%" -#: guix/scripts/lint.scm:683 +#: guix/scripts/lint.scm:684 #, scheme-format msgid "~a: ~a: proposed description:~% \"~a\"~%" msgstr "~a: ~a: foreslået beskrivelse:~% »~a«~%" -#: guix/scripts/lint.scm:725 +#: guix/scripts/lint.scm:726 msgid "all the source URIs are unreachable:" msgstr "alle kilde-URI'erne kan ikke nås:" -#: guix/scripts/lint.scm:747 +#: guix/scripts/lint.scm:748 msgid "the source file name should contain the package name" msgstr "kildefilnavnet skal indeholde pakkenavnet" -#: guix/scripts/lint.scm:763 +#: guix/scripts/lint.scm:764 #, scheme-format msgid "URL should be 'mirror://~a/~a'" msgstr "Adresse skal være »mirror://~a/~a«" -#: guix/scripts/lint.scm:781 guix/scripts/lint.scm:785 +#: guix/scripts/lint.scm:783 guix/scripts/lint.scm:788 #, scheme-format -msgid "failed to create derivation: ~a" -msgstr "kunne ikke oprette derivat: ~a" +msgid "failed to create ~a derivation: ~a" +msgstr "kunne ikke oprette ~a-derivat: ~a" -#: guix/scripts/lint.scm:799 +#: guix/scripts/lint.scm:805 #, scheme-format -msgid "failed to create derivation: ~s~%" -msgstr "kunne ikke oprette derivat: ~s~%" +msgid "failed to create ~a derivation: ~s" +msgstr "kunne ikke oprette ~a-derivat: ~s" -#: guix/scripts/lint.scm:809 +#: guix/scripts/lint.scm:817 msgid "invalid license field" msgstr "ugyldigt licensfelt" -#: guix/scripts/lint.scm:816 +#: guix/scripts/lint.scm:824 #, scheme-format msgid "~a: HTTP GET error for ~a: ~a (~s)~%" msgstr "~a: HTTP GET-fejl for ~a: ~a (~s)~%" -#: guix/scripts/lint.scm:826 +#: guix/scripts/lint.scm:834 #, scheme-format msgid "~a: host lookup failure: ~a~%" msgstr "~a: værtsnavnet kunne ikke slås op: ~a~%" -#: guix/scripts/lint.scm:831 +#: guix/scripts/lint.scm:839 #, scheme-format msgid "~a: TLS certificate error: ~a" msgstr "~a: TLS-certifikatfejl: ~a" -#: guix/scripts/lint.scm:846 +#: guix/scripts/lint.scm:854 msgid "while retrieving CVE vulnerabilities" msgstr "under indhentelse af CVE-sårbarheder" -#: guix/scripts/lint.scm:883 +#: guix/scripts/lint.scm:891 #, scheme-format msgid "probably vulnerable to ~a" msgstr "sandsynligvis sårbar for ~a" -#: guix/scripts/lint.scm:890 +#: guix/scripts/lint.scm:898 #, scheme-format msgid "while retrieving upstream info for '~a'" msgstr "under indhentelse af opstrømsinformation for »~a«" -#: guix/scripts/lint.scm:898 +#: guix/scripts/lint.scm:906 #, scheme-format msgid "can be upgraded to ~a" msgstr "kan opgraderes til ~a" -#: guix/scripts/lint.scm:913 +#: guix/scripts/lint.scm:921 #, scheme-format msgid "tabulation on line ~a, column ~a" msgstr "tabulering på linje ~a, kolonne ~a" -#: guix/scripts/lint.scm:922 +#: guix/scripts/lint.scm:930 #, scheme-format msgid "trailing white space on line ~a" msgstr "efterstillet mellemrum på linje ~a" -#: guix/scripts/lint.scm:932 +#: guix/scripts/lint.scm:940 #, scheme-format msgid "line ~a is way too long (~a characters)" msgstr "linjen ~a er alt for lang (~a tegn)" -#: guix/scripts/lint.scm:943 +#: guix/scripts/lint.scm:951 #, scheme-format msgid "line ~a: parentheses feel lonely, move to the previous or next line" msgstr "linjen ~a: parenteser er ensomme, flyt til den forrige eller næste linje" -#: guix/scripts/lint.scm:1013 +#: guix/scripts/lint.scm:1021 msgid "Validate package descriptions" msgstr "Valider pakkebeskrivelser" -#: guix/scripts/lint.scm:1017 +#: guix/scripts/lint.scm:1025 msgid "Validate synopsis & description of GNU packages" msgstr "Valider synopsis og beskrivelse for GNU-pakker" -#: guix/scripts/lint.scm:1021 +#: guix/scripts/lint.scm:1029 msgid "Identify inputs that should be native inputs" msgstr "Identificer inddata som skal være standarddata" -#: guix/scripts/lint.scm:1025 +#: guix/scripts/lint.scm:1033 msgid "Identify inputs that shouldn't be inputs at all" msgstr "Identificer inddata som ikke skal være inddata" -#: guix/scripts/lint.scm:1029 +#: guix/scripts/lint.scm:1037 msgid "Validate file names and availability of patches" msgstr "Valider filnavne og tilgængelighed for rettelser" -#: guix/scripts/lint.scm:1033 +#: guix/scripts/lint.scm:1041 msgid "Validate home-page URLs" msgstr "Valider hjemmesiders adresser" #. TRANSLATORS: is the name of a data type and must not be #. translated. -#: guix/scripts/lint.scm:1039 +#: guix/scripts/lint.scm:1047 msgid "Make sure the 'license' field is a or a list thereof" msgstr "Sikr at feltet »license« er en eller en liste deraf" -#: guix/scripts/lint.scm:1044 +#: guix/scripts/lint.scm:1052 msgid "Validate source URLs" msgstr "Valider kildeadresser" -#: guix/scripts/lint.scm:1048 +#: guix/scripts/lint.scm:1056 msgid "Suggest 'mirror://' URLs" msgstr "Foreslå »mirror://«-adresser" -#: guix/scripts/lint.scm:1052 +#: guix/scripts/lint.scm:1060 msgid "Validate file names of sources" msgstr "Valider filnavne for kilder" -#: guix/scripts/lint.scm:1056 +#: guix/scripts/lint.scm:1064 msgid "Report failure to compile a package to a derivation" msgstr "Rapporter mislykket kompilering af en pakke til et derivat" -#: guix/scripts/lint.scm:1060 +#: guix/scripts/lint.scm:1068 msgid "Validate package synopses" msgstr "Valider pakkesynopser" -#: guix/scripts/lint.scm:1064 +#: guix/scripts/lint.scm:1072 msgid "Check the Common Vulnerabilities and Exposures (CVE) database" msgstr "Kontroller databasen Common Vulnerabilities and Exposures (CVE)" -#: guix/scripts/lint.scm:1069 +#: guix/scripts/lint.scm:1077 msgid "Check the package for new upstream releases" msgstr "Kontroller pakken for nye opstrømsudgivelser" -#: guix/scripts/lint.scm:1073 +#: guix/scripts/lint.scm:1081 msgid "Look for formatting issues in the source" msgstr "Kig efter formateringsproblemstillinger i kilden" -#: guix/scripts/lint.scm:1101 +#: guix/scripts/lint.scm:1109 msgid "" "Usage: guix lint [OPTION]... [PACKAGE]...\n" "Run a set of checkers on the specified package; if none is specified,\n" @@ -2308,7 +2384,7 @@ msgstr "" "Kør et sæt af kontroller på den specificerede pakke; hvis ingen er specificeret,\n" "så kør kontrollerne på alle pakker.\n" -#: guix/scripts/lint.scm:1104 +#: guix/scripts/lint.scm:1112 msgid "" "\n" " -c, --checkers=CHECKER1,CHECKER2...\n" @@ -2318,7 +2394,7 @@ msgstr "" " -c, --checkers=KONTROL1,KONTROL2...\n" " kør kun de specificerede kontroller" -#: guix/scripts/lint.scm:1109 +#: guix/scripts/lint.scm:1117 msgid "" "\n" " -l, --list-checkers display the list of available lint checkers" @@ -2326,7 +2402,7 @@ msgstr "" "\n" " -l, --list-checkers vis listen med tilgængelige lint-kontroller" -#: guix/scripts/lint.scm:1129 +#: guix/scripts/lint.scm:1137 #, scheme-format msgid "~a: invalid checker~%" msgstr "~a: ugyldig kontrol~%" @@ -2488,24 +2564,24 @@ msgstr "kildeplacering for pakken »~a« er ukendt~%" msgid "failed to launch '~a': ~a~%" msgstr "kunne ikke starte »~a«: ~a~%" -#: guix/scripts/size.scm:77 +#: guix/scripts/size.scm:68 #, scheme-format msgid "no available substitute information for '~a'~%" msgstr "ingen tilgængelig substitutinformation for »~a«~%" -#: guix/scripts/size.scm:99 +#: guix/scripts/size.scm:90 msgid "store item" msgstr "lagerpost" -#: guix/scripts/size.scm:99 +#: guix/scripts/size.scm:90 msgid "total" msgstr "i alt" -#: guix/scripts/size.scm:99 +#: guix/scripts/size.scm:90 msgid "self" msgstr "selv" -#: guix/scripts/size.scm:107 +#: guix/scripts/size.scm:98 #, scheme-format msgid "total: ~,1f MiB~%" msgstr "i alt: ~,1f MiB~%" @@ -2513,11 +2589,11 @@ msgstr "i alt: ~,1f MiB~%" #. TRANSLATORS: This is the title of a graph, meaning that the graph #. represents a profile of the store (the "store" being the place where #. packages are stored.) -#: guix/scripts/size.scm:221 +#: guix/scripts/size.scm:212 msgid "store profile" msgstr "lagerprofil" -#: guix/scripts/size.scm:230 +#: guix/scripts/size.scm:221 msgid "" "Usage: guix size [OPTION]... PACKAGE\n" "Report the size of PACKAGE and its dependencies.\n" @@ -2525,7 +2601,7 @@ msgstr "" "Brug: guix size [TILVALG]... PAKKE\n" "Rapporter størrelsen for PAKKE og dens afhængigheder.\n" -#: guix/scripts/size.scm:235 +#: guix/scripts/size.scm:226 msgid "" "\n" " -s, --system=SYSTEM consider packages for SYSTEM--e.g., \"i686-linux\"" @@ -2534,7 +2610,7 @@ msgstr "" " -s, --system=SYSTEM tag i betragtning pakker for SYSTEM--f.eks., »i686-linux«" #. TRANSLATORS: "closure" and "self" must not be translated. -#: guix/scripts/size.scm:238 +#: guix/scripts/size.scm:229 msgid "" "\n" " --sort=KEY sort according to KEY--\"closure\" or \"self\"" @@ -2542,7 +2618,7 @@ msgstr "" "\n" " --sort=KEY sorter jævnfør KEY--\"closure\" eller \"self\"" -#: guix/scripts/size.scm:240 +#: guix/scripts/size.scm:231 msgid "" "\n" " -m, --map-file=FILE write to FILE a graphical map of disk usage" @@ -2550,12 +2626,12 @@ msgstr "" "\n" " -m, --map-file=FIL skriv til FIL et grafisk kort over diskforbrug" -#: guix/scripts/size.scm:271 +#: guix/scripts/size.scm:262 #, scheme-format msgid "~a: invalid sorting key~%" msgstr "~a: ugyldig sorteringsnøgle~%" -#: guix/scripts/size.scm:306 +#: guix/scripts/size.scm:297 msgid "missing store item argument\n" msgstr "manglende lagerpostargument\n" @@ -2633,7 +2709,7 @@ msgstr "De gyldige motortyper er:\n" #. TRANSLATORS: Here 'dot' is the name of a program; it must not be #. translated. -#: guix/scripts/graph.scm:453 +#: guix/scripts/graph.scm:457 msgid "" "Usage: guix graph PACKAGE...\n" "Emit a representation of the dependency graph of PACKAGE...\n" @@ -2641,7 +2717,7 @@ msgstr "" "Brug: guix graph PAKKE...\n" "Opret en repræsentation af afhængighedsgrafen for PAKKE...\n" -#: guix/scripts/graph.scm:455 +#: guix/scripts/graph.scm:459 msgid "" "\n" " -b, --backend=TYPE produce a graph with the given backend TYPE" @@ -2649,7 +2725,7 @@ msgstr "" "\n" " -b, --backend=TYPE fremstil en graf med den angivne motor-TYPE" -#: guix/scripts/graph.scm:457 +#: guix/scripts/graph.scm:461 msgid "" "\n" " --list-backends list the available graph backends" @@ -2657,7 +2733,7 @@ msgstr "" "\n" " --list-backends vis de tilgængelige grafmotorer" -#: guix/scripts/graph.scm:459 +#: guix/scripts/graph.scm:463 msgid "" "\n" " -t, --type=TYPE represent nodes of the given TYPE" @@ -2665,7 +2741,7 @@ msgstr "" "\n" " -t, --type=TYPE repræsenter knuder for den givne TYPE" -#: guix/scripts/graph.scm:461 +#: guix/scripts/graph.scm:465 msgid "" "\n" " --list-types list the available graph types" @@ -2673,7 +2749,7 @@ msgstr "" "\n" " --list-types vis de tilgængelige graftyper" -#: guix/scripts/graph.scm:463 guix/scripts/pack.scm:644 +#: guix/scripts/graph.scm:467 guix/scripts/pack.scm:710 msgid "" "\n" " -e, --expression=EXPR consider the package EXPR evaluates to" @@ -2681,6 +2757,15 @@ msgstr "" "\n" " -e, --expression=UDTRYK tag i betragtning pakken UDTRYK evaluerer til" +#: guix/scripts/graph.scm:469 +msgid "" +"\n" +" -s, --system=SYSTEM consider the graph for SYSTEM--e.g., \"i686-linux\"" +msgstr "" +"\n" +" -s, --system=SYSTEM tag i betragtning grafen for SYSTEM--f.eks.,\n" +" »i686-linux«" + #: guix/scripts/challenge.scm:191 #, scheme-format msgid " local hash: ~a~%" @@ -2797,12 +2882,12 @@ msgstr "" msgid "use '--to' or '--from'~%" msgstr "brug »--to« eller »--from«~%" -#: guix/scripts/pack.scm:89 +#: guix/scripts/pack.scm:93 #, scheme-format msgid "~a: compressor not found~%" msgstr "~a: kompressor blev ikke fundet~%" -#: guix/scripts/pack.scm:467 +#: guix/scripts/pack.scm:504 #, scheme-format msgid "" "cross-compilation not implemented here;\n" @@ -2811,12 +2896,45 @@ msgstr "" "krydskompilering ikke implementeret her;\n" "skriv til '~a'~%" +#: guix/scripts/pack.scm:615 +msgid "The supported formats for 'guix pack' are:" +msgstr "De understøttede formater for »guix pack« er:" + +#: guix/scripts/pack.scm:617 +msgid "" +"\n" +" tarball Self-contained tarball, ready to run on another machine" +msgstr "" +"\n" +" tarball Selvstændig tarball, klar til afvikling på en anden maskine" + +#: guix/scripts/pack.scm:619 +msgid "" +"\n" +" squashfs Squashfs image suitable for Singularity" +msgstr "" +"\n" +" squashfs Squashfs-aftryk egnet for Singularity" + #: guix/scripts/pack.scm:621 +msgid "" +"\n" +" docker Tarball ready for 'docker load'" +msgstr "" +"\n" +" docker Tarball klar for »docker load«" + +#: guix/scripts/pack.scm:678 #, scheme-format msgid "~a: invalid symlink specification~%" msgstr "~a: ugyldig symbolsk henvisningsspecifikation~%" -#: guix/scripts/pack.scm:634 +#: guix/scripts/pack.scm:689 +#, scheme-format +msgid "~a: unsupported profile name~%" +msgstr "~a: ikke understøttet profilnavn~%" + +#: guix/scripts/pack.scm:698 msgid "" "Usage: guix pack [OPTION]... PACKAGE...\n" "Create a bundle of PACKAGE.\n" @@ -2824,7 +2942,7 @@ msgstr "" "Brug: guix pack [TILVALG]... PAKKE...\n" "Opret en samling af PAKKE.\n" -#: guix/scripts/pack.scm:640 +#: guix/scripts/pack.scm:704 msgid "" "\n" " -f, --format=FORMAT build a pack in the given FORMAT" @@ -2832,7 +2950,15 @@ msgstr "" "\n" " -f, --format=FORMAT kompiler en pakke i det givne FORMAT" -#: guix/scripts/pack.scm:642 +#: guix/scripts/pack.scm:706 +msgid "" +"\n" +" --list-formats list the formats available" +msgstr "" +"\n" +" --list-formats vis de tilgængelige formater" + +#: guix/scripts/pack.scm:708 msgid "" "\n" " -R, --relocatable produce relocatable executables" @@ -2840,7 +2966,7 @@ msgstr "" "\n" " -R, --relocatable lav flytbare kørbare filer" -#: guix/scripts/pack.scm:650 +#: guix/scripts/pack.scm:716 msgid "" "\n" " -C, --compression=TOOL compress using TOOL--e.g., \"lzip\"" @@ -2848,7 +2974,7 @@ msgstr "" "\n" " -C, --compression=VÆRKTØJ komprimer via VÆRKTØJ--f.eks., »lzip«" -#: guix/scripts/pack.scm:652 +#: guix/scripts/pack.scm:718 msgid "" "\n" " -S, --symlink=SPEC create symlinks to the profile according to SPEC" @@ -2856,7 +2982,7 @@ msgstr "" "\n" " -S, --symlink=SPEC opret symbolske henvisninger til profilen jævnfør SPEC" -#: guix/scripts/pack.scm:654 +#: guix/scripts/pack.scm:720 msgid "" "\n" " -m, --manifest=FILE create a pack with the manifest from FILE" @@ -2864,7 +2990,7 @@ msgstr "" "\n" " -m, --manifest=FIL opret en pakke med manifestet fra FIL" -#: guix/scripts/pack.scm:656 +#: guix/scripts/pack.scm:722 msgid "" "\n" " --localstatedir include /var/guix in the resulting pack" @@ -2872,7 +2998,17 @@ msgstr "" "\n" " --localstatedir inkluder /var/guix i resultatpakken" -#: guix/scripts/pack.scm:658 +#: guix/scripts/pack.scm:724 +msgid "" +"\n" +" --profile-name=NAME\n" +" populate /var/guix/profiles/.../NAME" +msgstr "" +"\n" +" --profile-name=NAVN\n" +" befolk /var/guix/profiles/.../NAVN" + +#: guix/scripts/pack.scm:727 msgid "" "\n" " --bootstrap use the bootstrap binaries to build the pack" @@ -2880,91 +3016,91 @@ msgstr "" "\n" " --bootstrap brug bootstraps binære filer til at kompilere pakken" -#: guix/scripts/pack.scm:700 +#: guix/scripts/pack.scm:769 #, scheme-format msgid "both a manifest and a package list were given~%" msgstr "både et manifest og en pakkeliste blev angivet~%" -#: guix/scripts/pack.scm:743 +#: guix/scripts/pack.scm:814 #, scheme-format -msgid "~a: unknown pack format" -msgstr "~a: ukendt pakkeformat" +msgid "~a: unknown pack format~%" +msgstr "~a: ukendt pakkeformat~%" -#: guix/scripts/weather.scm:72 +#: guix/scripts/weather.scm:73 msgid "computing ~h package derivations for ~a...~%" msgstr "beregner ~h pakkederivater for ~a...~%" -#: guix/scripts/weather.scm:161 +#: guix/scripts/weather.scm:162 msgid "looking for ~h store items on ~a...~%" msgstr "kigger efter ~h lagerelementer på ~a...~%" -#: guix/scripts/weather.scm:173 +#: guix/scripts/weather.scm:174 msgid " ~2,1f% substitutes available (~h out of ~h)~%" msgstr " ~2,1f% substitutter tilgængelige (~h ud af ~h)~%" -#: guix/scripts/weather.scm:179 +#: guix/scripts/weather.scm:180 #, scheme-format msgid " unknown substitute sizes~%" msgstr " ukendte substitutstørrelser~%" -#: guix/scripts/weather.scm:182 +#: guix/scripts/weather.scm:183 msgid " ~,1h MiB of nars (compressed)~%" msgstr " ~,1h MiB af nars (komprimeret)~%" -#: guix/scripts/weather.scm:183 +#: guix/scripts/weather.scm:184 msgid " at least ~,1h MiB of nars (compressed)~%" msgstr " mindst ~,1h MiB af nars (komprimeret)~%" -#: guix/scripts/weather.scm:185 +#: guix/scripts/weather.scm:186 msgid " ~,1h MiB on disk (uncompressed)~%" msgstr " ~,1h MiB på disk (komprimeret)~%" -#: guix/scripts/weather.scm:187 +#: guix/scripts/weather.scm:188 msgid " ~,3h seconds per request (~,1h seconds in total)~%" msgstr " ~,3h sekunder per forespørgsel (~,1h sekunder samlet)~%" -#: guix/scripts/weather.scm:189 +#: guix/scripts/weather.scm:190 msgid " ~,1h requests per second~%" msgstr " ~,1h forespørgsler per sekund~%" -#: guix/scripts/weather.scm:195 +#: guix/scripts/weather.scm:196 #, scheme-format msgid " (continuous integration information unavailable)~%" msgstr " (kontinuerlig integrationsinformation utilgængelig)~%" -#: guix/scripts/weather.scm:198 +#: guix/scripts/weather.scm:199 #, scheme-format msgid " '~a' returned ~a (~s)~%" msgstr " »~a« returnerede ~a (~s)~%" -#: guix/scripts/weather.scm:215 +#: guix/scripts/weather.scm:216 msgid " ~,1f% (~h out of ~h) of the missing items are queued~%" msgstr " ~,1f% (~h ud af ~h) af de manglende elementer er placeret i køen~%" -#: guix/scripts/weather.scm:221 +#: guix/scripts/weather.scm:222 msgid " at least ~h queued builds~%" msgstr " mindst ~h kompileringer i køen~%" -#: guix/scripts/weather.scm:222 +#: guix/scripts/weather.scm:223 msgid " ~h queued builds~%" msgstr " ~h kompileringer i køen~%" -#: guix/scripts/weather.scm:225 +#: guix/scripts/weather.scm:226 #, scheme-format msgid " ~a: ~a (~0,1f%)~%" msgstr " ~a: ~a (~0,1f%)~%" -#: guix/scripts/weather.scm:231 +#: guix/scripts/weather.scm:232 #, scheme-format msgid " build rate: ~1,2f builds per hour~%" msgstr " kompileringshastighed: ~1,2f kompileringer per time~%" -#: guix/scripts/weather.scm:235 +#: guix/scripts/weather.scm:236 #, scheme-format msgid " ~a: ~,2f builds per hour~%" msgstr " ~a: ~,2f kompileringer per time~%" -#: guix/scripts/weather.scm:247 +#: guix/scripts/weather.scm:248 msgid "" "Usage: guix weather [OPTIONS]\n" "Report the availability of substitutes.\n" @@ -2972,7 +3108,7 @@ msgstr "" "Brug: guix weather [TILVALG]\n" "Rapporter tilgængelighed over substitutter.\n" -#: guix/scripts/weather.scm:249 +#: guix/scripts/weather.scm:250 msgid "" "\n" " --substitute-urls=URLS\n" @@ -2983,7 +3119,7 @@ msgstr "" " kontroller for tilgængelige substitutter på URLS\n" " (ADRESSER)" -#: guix/scripts/weather.scm:252 +#: guix/scripts/weather.scm:253 msgid "" "\n" " -m, --manifest=MANIFEST\n" @@ -2993,7 +3129,7 @@ msgstr "" " -m, --manifest=MANIFEST\n" " slå substitutter op for pakker angivet i MANIFEST" -#: guix/scripts/weather.scm:255 +#: guix/scripts/weather.scm:256 msgid "" "\n" " -s, --system=SYSTEM consider substitutes for SYSTEM--e.g., \"i686-linux\"" @@ -3002,32 +3138,99 @@ msgstr "" " -s, --system=SYSTEM tag i betragtning substitutter for SYSTEM--f.eks.,\n" "»i686-linux«" -#: guix/scripts/weather.scm:279 +#: guix/scripts/weather.scm:280 #, scheme-format msgid "~a: invalid URL~%" msgstr "~a: ugyldig URL~%" -#: guix/gnu-maintenance.scm:570 +#: guix/scripts/describe.scm:45 +#, scheme-format +msgid "~a: unsupported output format~%" +msgstr "~a: ikke understøttet resultatformat%" + +#: guix/scripts/describe.scm:64 +msgid "" +"Usage: guix describe [OPTION]...\n" +"Display information about the channels currently in use.\n" +msgstr "" +"Brug: guix describe [TILVALG] ...\n" +"Vis information om kanalerne i brug.\n" + +#: guix/scripts/describe.scm:66 +msgid "" +"\n" +" -f, --format=FORMAT display information in the given FORMAT" +msgstr "" +"\n" +" -f, --format=FORMAT vis information i det givne FORMAT" + +#: guix/scripts/describe.scm:68 +msgid "" +"\n" +" -p, --profile=PROFILE display information about PROFILE" +msgstr "" +"\n" +" -p, --profile=PROFIL vis information om PROFIL" + +#: guix/scripts/describe.scm:87 +#, scheme-format +msgid "~%;; warning: GUIX_PACKAGE_PATH=\"~a\"~%" +msgstr "~%;; advarsel: GUIX_PACKAGE_PATH=\"~a\"~%" + +#: guix/scripts/describe.scm:115 +#, scheme-format +msgid "failed to determine origin~%" +msgstr "kunne ikke bestemme origin~%" + +#: guix/scripts/describe.scm:121 +#, scheme-format +msgid "Git checkout:~%" +msgstr "Git checkout:~%" + +#: guix/scripts/describe.scm:122 +#, scheme-format +msgid " repository: ~a~%" +msgstr " arkiv: ~a~%" + +#: guix/scripts/describe.scm:123 +#, scheme-format +msgid " branch: ~a~%" +msgstr " gren: ~a~%" + +#: guix/scripts/describe.scm:124 +#, scheme-format +msgid " commit: ~a~%" +msgstr " commit: ~a~%" + +#: guix/scripts/processes.scm:197 +msgid "" +"Usage: guix processes\n" +"List the current Guix sessions and their processes." +msgstr "" +"Brug: guix processes\n" +"Vis de nuværende Guix-sessioner og deres processer." + +#: guix/gnu-maintenance.scm:661 msgid "Updater for GNU packages" msgstr "Opdater for GNU-pakker" -#: guix/gnu-maintenance.scm:579 +#: guix/gnu-maintenance.scm:670 msgid "Updater for GNU packages only available via FTP" msgstr "Opdateringsprogram for GNU-pakker er kun tilgængelig via FTP" -#: guix/gnu-maintenance.scm:588 +#: guix/gnu-maintenance.scm:679 msgid "Updater for KDE packages" msgstr "Opdateringsprogram for KDE-pakker" -#: guix/gnu-maintenance.scm:595 +#: guix/gnu-maintenance.scm:686 msgid "Updater for X.org packages" msgstr "Opdateringsprogram for X.org-pakker" -#: guix/gnu-maintenance.scm:602 +#: guix/gnu-maintenance.scm:693 msgid "Updater for packages hosted on kernel.org" msgstr "Opdateringsprogram for pakker fra kernel.org" -#: guix/scripts/container.scm:25 +#: guix/scripts/container.scm:26 msgid "" "Usage: guix container ACTION ARGS...\n" "Build and manipulate Linux containers.\n" @@ -3035,16 +3238,16 @@ msgstr "" "Brug: guix container HANDLING ARG ...\n" "Kompiler og manipuler Linuxcontainere.\n" -#: guix/scripts/container.scm:30 +#: guix/scripts/container.scm:31 msgid " exec execute a command inside of an existing container\n" msgstr " exec kør en kommando inden i en eksisterende container\n" -#: guix/scripts/container.scm:53 +#: guix/scripts/container.scm:54 #, scheme-format msgid "guix container: missing action~%" msgstr "guix container: mangler handling~%" -#: guix/scripts/container.scm:63 +#: guix/scripts/container.scm:64 #, scheme-format msgid "guix container: invalid action~%" msgstr "guix container: ugyldig handling~%" @@ -3102,81 +3305,104 @@ msgstr "~a: kunne ikke lokalisere kildefil" msgid "~a: ~a: no `version' field in source; skipping~%" msgstr "~a: ~a: intet »versionsfelt« i kilde; udelader~%" -#: guix/ui.scm:169 +#: guix/ui.scm:175 #, scheme-format msgid "error: ~a: unbound variable" msgstr "fejl: ~a: variabel uden binding" -#: guix/ui.scm:265 +#: guix/ui.scm:271 msgid "entering debugger; type ',bt' for a backtrace\n" msgstr "går i fejlsøger; tast »,bt« for en tilbagesporing\n" -#: guix/ui.scm:314 +#: guix/ui.scm:320 #, scheme-format msgid "hint: ~a~%" msgstr "fif: ~a~%" -#: guix/ui.scm:330 +#: guix/ui.scm:336 msgid "Did you forget a @code{use-modules} form?" msgstr "Glemte du en @code{use-modules}-form?" -#: guix/ui.scm:332 +#: guix/ui.scm:338 #, scheme-format msgid "Did you forget @code{(use-modules ~a)}?" msgstr "Glemte du @code{(use-modules ~a)}?" -#: guix/ui.scm:341 guix/ui.scm:381 guix/ui.scm:388 +#: guix/ui.scm:347 guix/ui.scm:387 guix/ui.scm:394 #, scheme-format msgid "failed to load '~a': ~a~%" msgstr "kunne ikke indlæse »~a«: ~a~%" -#: guix/ui.scm:348 +#: guix/ui.scm:354 #, scheme-format msgid "~amissing closing parenthesis~%" msgstr "~amanglende afsluttende parentes~%" -#: guix/ui.scm:353 guix/ui.scm:361 guix/ui.scm:692 +#: guix/ui.scm:359 guix/ui.scm:367 guix/ui.scm:714 #, scheme-format msgid "~a: error: ~a~%" msgstr "~a: fejl: ~a~%" -#: guix/ui.scm:368 guix/ui.scm:762 +#: guix/ui.scm:374 guix/ui.scm:784 #, scheme-format msgid "exception thrown: ~s~%" msgstr "undtagelse smidt: ~s~%" -#: guix/ui.scm:372 guix/ui.scm:394 +#: guix/ui.scm:378 guix/ui.scm:400 #, scheme-format msgid "failed to load '~a':~%" msgstr "kunne ikke indlæse »~a«:~%" -#: guix/ui.scm:384 +#: guix/ui.scm:390 #, scheme-format msgid "~a: warning: ~a~%" msgstr "~a: advarsel: ~a~%" -#: guix/ui.scm:391 +#: guix/ui.scm:397 #, scheme-format msgid "failed to load '~a': exception thrown: ~s~%" msgstr "kunne ikke indlæse »~a«: undtagelse smidt: ~s~%" -#: guix/ui.scm:424 +#: guix/ui.scm:433 #, scheme-format msgid "failed to install locale: ~a~%" msgstr "kunne ikke installere sprog: ~a~%" +#: guix/ui.scm:435 +msgid "" +"Consider installing the @code{glibc-utf8-locales} or\n" +"@code{glibc-locales} package and defining @code{GUIX_LOCPATH}, along these\n" +"lines:\n" +"\n" +"@example\n" +"guix package -i glibc-utf8-locales\n" +"export GUIX_LOCPATH=\"$HOME/.guix-profile/lib/locale\"\n" +"@end example\n" +"\n" +"See the \"Application Setup\" section in the manual, for more info.\n" +msgstr "" +"Overvej at installere enten pakken @code{glibc-utf8-locales} eller\n" +"@code{glibc-locales} og definere @code{GUIX_LOCPATH}; på denne måde:\n" +"\n" +"@example\n" +"guix package -i glibc-utf8-locales\n" +"export GUIX_LOCPATH=\"$HOME/.guix-profile/lib/locale\"\n" +"@end example\n" +"\n" +"Se afsnittet »Programopsætning« i manualen, for yderligere info.\n" + #. TRANSLATORS: Translate "(C)" to the copyright symbol #. (C-in-a-circle), if this symbol is available in the user's #. locale. Otherwise, do not translate "(C)"; leave it as-is. */ -#: guix/ui.scm:454 +#: guix/ui.scm:473 msgid "(C)" msgstr "©" -#: guix/ui.scm:455 +#: guix/ui.scm:474 msgid "the Guix authors\n" msgstr "Guix-forfatterne\n" -#: guix/ui.scm:456 +#: guix/ui.scm:475 msgid "" "License GPLv3+: GNU GPL version 3 or later \n" "This is free software: you are free to change and redistribute it.\n" @@ -3190,7 +3416,7 @@ msgstr "" #. package. Please add another line saying "Report translation bugs to #. ...\n" with the address for translation bugs (typically your translation #. team's web or email address). -#: guix/ui.scm:468 +#: guix/ui.scm:487 #, scheme-format msgid "" "\n" @@ -3199,7 +3425,7 @@ msgstr "" "\n" "Rapporter fejl til: ~a." -#: guix/ui.scm:470 +#: guix/ui.scm:489 #, scheme-format msgid "" "\n" @@ -3208,7 +3434,7 @@ msgstr "" "\n" "~a hjemmeside: <~a>" -#: guix/ui.scm:472 +#: guix/ui.scm:491 msgid "" "\n" "General help using GNU software: " @@ -3216,27 +3442,27 @@ msgstr "" "\n" "Generel hjælp til brugen af GNU-programmer: " -#: guix/ui.scm:517 +#: guix/ui.scm:539 #, scheme-format msgid "'~a' is not a valid regular expression: ~a~%" msgstr "»~a« er ikke et gyldigt regulært udtryk: ~a~%" -#: guix/ui.scm:523 +#: guix/ui.scm:545 #, scheme-format msgid "~a: invalid number~%" msgstr "~a: ugyldigt nummer~%" -#: guix/ui.scm:540 +#: guix/ui.scm:562 #, scheme-format msgid "invalid number: ~a~%" msgstr "ugyldigt nummer: ~a~%" -#: guix/ui.scm:563 +#: guix/ui.scm:585 #, scheme-format msgid "unknown unit: ~a~%" msgstr "ukendt enhed: ~a~%" -#: guix/ui.scm:578 +#: guix/ui.scm:600 #, scheme-format msgid "" "You cannot have two different versions\n" @@ -3245,7 +3471,7 @@ msgstr "" "Du kan ikke have to forskellige versioner\n" "eller varianter af @code{~a} i den samme profil." -#: guix/ui.scm:581 +#: guix/ui.scm:603 #, scheme-format msgid "" "Try upgrading both @code{~a} and @code{~a},\n" @@ -3254,116 +3480,116 @@ msgstr "" "Prøv at opgradere både @code{~a} og @code{~a},\n" "eller fjern en af dem fra profilen." -#: guix/ui.scm:600 +#: guix/ui.scm:622 #, scheme-format msgid "~a:~a:~a: package `~a' has an invalid input: ~s~%" msgstr "~a:~a:~a: pakken »~a« har ugyldige inddata: ~s~%" -#: guix/ui.scm:607 +#: guix/ui.scm:629 #, scheme-format msgid "~a: ~a: build system `~a' does not support cross builds~%" msgstr "~a: ~a: kompileringssystem »~a« understøtter ikke krydskompileringer~%" -#: guix/ui.scm:613 +#: guix/ui.scm:635 #, scheme-format msgid "~s: invalid G-expression input~%" msgstr "~s: ugyldige G-udtryksindata~%" -#: guix/ui.scm:616 +#: guix/ui.scm:638 #, scheme-format msgid "profile '~a' does not exist~%" msgstr "profilen »~a« findes ikke~%" -#: guix/ui.scm:619 +#: guix/ui.scm:641 #, scheme-format msgid "generation ~a of profile '~a' does not exist~%" msgstr "oprettelse ~a af profilen »~a« findes ikke~%" -#: guix/ui.scm:628 +#: guix/ui.scm:650 #, scheme-format msgid " ... propagated from ~a@~a~%" msgstr " ... formeret fra ~a@~a~%" -#: guix/ui.scm:638 +#: guix/ui.scm:660 #, scheme-format msgid "profile contains conflicting entries for ~a~a~%" msgstr "profil indeholder elementer i konflikt for ~a~a~%" -#: guix/ui.scm:641 +#: guix/ui.scm:663 #, scheme-format msgid " first entry: ~a@~a~a ~a~%" msgstr " første element: ~a@~a~a ~a~%" -#: guix/ui.scm:647 +#: guix/ui.scm:669 #, scheme-format msgid " second entry: ~a@~a~a ~a~%" msgstr " andet element: ~a@~a~a ~a~%" -#: guix/ui.scm:659 +#: guix/ui.scm:681 #, scheme-format msgid "corrupt input while restoring '~a' from ~s~%" msgstr "ødelagte inddata under gendannelse af »~a« fra ~s~%" -#: guix/ui.scm:661 +#: guix/ui.scm:683 #, scheme-format msgid "corrupt input while restoring archive from ~s~%" msgstr "ødelagte inddata under gendannelse af arkiv fra ~s~%" -#: guix/ui.scm:664 +#: guix/ui.scm:686 #, scheme-format msgid "failed to connect to `~a': ~a~%" msgstr "kunne ikke forbinde til »~a«: ~a~%" -#: guix/ui.scm:669 +#: guix/ui.scm:691 #, scheme-format msgid "build failed: ~a~%" msgstr "kompilering mislykkedes: ~a~%" -#: guix/ui.scm:672 +#: guix/ui.scm:694 #, scheme-format msgid "reference to invalid output '~a' of derivation '~a'~%" msgstr "reference til ugyldige uddata »~a« for derivat »~a«~%" -#: guix/ui.scm:676 +#: guix/ui.scm:698 #, scheme-format msgid "file '~a' could not be found in these directories:~{ ~a~}~%" msgstr "filen »~a« blev ikke fundet i disse mapper:~{ ~a~}~%" -#: guix/ui.scm:681 +#: guix/ui.scm:703 #, scheme-format msgid "program exited~@[ with non-zero exit status ~a~]~@[ terminated by signal ~a~]~@[ stopped by signal ~a~]: ~s~%" msgstr "program afsluttede~@[ med ikke-nul afslutstatus ~a~]~@[ termineret med signal ~a~]~@[ stoppet af signal ~a~]: ~s~%" -#: guix/ui.scm:712 +#: guix/ui.scm:734 #, scheme-format msgid "~a: ~a~%" msgstr "~a: ~a~%" -#: guix/ui.scm:747 +#: guix/ui.scm:769 #, scheme-format msgid "failed to read expression ~s: ~s~%" msgstr "kunne ikke læse udtryk ~s: ~s~%" -#: guix/ui.scm:753 +#: guix/ui.scm:775 #, scheme-format msgid "failed to evaluate expression '~a':~%" msgstr "kunne ikke evaluere udtryk »~a«:~%" -#: guix/ui.scm:756 +#: guix/ui.scm:778 #, scheme-format msgid "syntax error: ~a~%" msgstr "syntaksfejl: ~a~%" -#: guix/ui.scm:774 +#: guix/ui.scm:796 #, scheme-format msgid "expression ~s does not evaluate to a package~%" msgstr "udtryk ~s evaluerer ikke til en pakke~%" -#: guix/ui.scm:793 +#: guix/ui.scm:816 msgid "at least ~,1h MB needed but only ~,1h MB available in ~a~%" msgstr "mindst ~,1h MB krævet men kun ~,1h MB tilgængelig i ~a~%" -#: guix/ui.scm:861 +#: guix/ui.scm:894 #, scheme-format msgid "~:[The following derivation would be built:~%~{ ~a~%~}~;~]" msgid_plural "~:[The following derivations would be built:~%~{ ~a~%~}~;~]" @@ -3372,18 +3598,25 @@ msgstr[1] "~:[De følgende derivater ville blive kompileret:~%~{ ~a~%~}~;~]" #. TRANSLATORS: "MB" is for "megabyte"; it should be #. translated to the corresponding abbreviation. -#: guix/ui.scm:869 +#: guix/ui.scm:902 msgid "~:[~,1h MB would be downloaded:~%~{ ~a~%~}~;~]" msgstr "~:[~,1h MB ville blive hentet:~%~{ ~a~%~}~;~]" -#: guix/ui.scm:874 +#: guix/ui.scm:907 #, scheme-format msgid "~:[The following file would be downloaded:~%~{ ~a~%~}~;~]" msgid_plural "~:[The following files would be downloaded:~%~{ ~a~%~}~;~]" msgstr[0] "~:[Den følgende fil ville blive hentet:~%~{ ~a~%~}~;~]" msgstr[1] "~:[De følgende filer ville blive hentet:~%~{ ~a~%~}~;~]" -#: guix/ui.scm:881 +#: guix/ui.scm:913 +#, scheme-format +msgid "~:[The following graft would be made:~%~{ ~a~%~}~;~]" +msgid_plural "~:[The following grafts would be made:~%~{ ~a~%~}~;~]" +msgstr[0] "~:[Den følgende graft ville blive lavet:~%~{ ~a~%~}~;~]" +msgstr[1] "~:[De følgende grafter ville blive lavet:~%~{ ~a~%~}~;~]" + +#: guix/ui.scm:919 #, scheme-format msgid "~:[The following derivation will be built:~%~{ ~a~%~}~;~]" msgid_plural "~:[The following derivations will be built:~%~{ ~a~%~}~;~]" @@ -3392,78 +3625,85 @@ msgstr[1] "~:[De følgende derivater vil blive kompileret:~%~{ ~a~%~}~;~]" #. TRANSLATORS: "MB" is for "megabyte"; it should be #. translated to the corresponding abbreviation. -#: guix/ui.scm:889 +#: guix/ui.scm:927 msgid "~:[~,1h MB will be downloaded:~%~{ ~a~%~}~;~]" msgstr "~:[~,1h MB vil blive hentet:~%~{ ~a~%~}~;~]" -#: guix/ui.scm:894 +#: guix/ui.scm:932 #, scheme-format msgid "~:[The following file will be downloaded:~%~{ ~a~%~}~;~]" msgid_plural "~:[The following files will be downloaded:~%~{ ~a~%~}~;~]" msgstr[0] "~:[Den følgende fil vil blive hentet:~%~{ ~a~%~}~;~]" msgstr[1] "~:[De følgende filer vil blive hentet:~%~{ ~a~%~}~;~]" -#: guix/ui.scm:954 +#: guix/ui.scm:938 +#, scheme-format +msgid "~:[The following graft will be made:~%~{ ~a~%~}~;~]" +msgid_plural "~:[The following grafts will be made:~%~{ ~a~%~}~;~]" +msgstr[0] "~:[Den følgende graft vil blive lavet:~%~{ ~a~%~}~;~]" +msgstr[1] "~:[De følgende grafter vil blive lavet:~%~{ ~a~%~}~;~]" + +#: guix/ui.scm:997 #, scheme-format msgid "The following package would be removed:~%~{~a~%~}~%" msgid_plural "The following packages would be removed:~%~{~a~%~}~%" msgstr[0] "Den følgende pakke ville blive fjernet:~%~{~a~%~}~%" msgstr[1] "De følgende pakker ville blive fjernet:~%~{~a~%~}~%" -#: guix/ui.scm:959 +#: guix/ui.scm:1002 #, scheme-format msgid "The following package will be removed:~%~{~a~%~}~%" msgid_plural "The following packages will be removed:~%~{~a~%~}~%" msgstr[0] "Den følgende pakke vil blive fjernet:~%~{~a~%~}~%" msgstr[1] "De følgende pakker vil blive fjernet:~%~{~a~%~}~%" -#: guix/ui.scm:972 +#: guix/ui.scm:1015 #, scheme-format msgid "The following package would be downgraded:~%~{~a~%~}~%" msgid_plural "The following packages would be downgraded:~%~{~a~%~}~%" msgstr[0] "Den følgende pakke ville blive nedgraderet:~%~{~a~%~}~%" msgstr[1] "De følgende pakker ville blive nedgraderet:~%~{~a~%~}~%" -#: guix/ui.scm:977 +#: guix/ui.scm:1020 #, scheme-format msgid "The following package will be downgraded:~%~{~a~%~}~%" msgid_plural "The following packages will be downgraded:~%~{~a~%~}~%" msgstr[0] "Den følgende pakke vil blive nedgraderet:~%~{~a~%~}~%" msgstr[1] "De følgende pakker vil blive nedgraderet:~%~{~a~%~}~%" -#: guix/ui.scm:990 +#: guix/ui.scm:1033 #, scheme-format msgid "The following package would be upgraded:~%~{~a~%~}~%" msgid_plural "The following packages would be upgraded:~%~{~a~%~}~%" msgstr[0] "Den følgende pakke ville blive opgraderet:~%~{~a~%~}~%" msgstr[1] "De følgende pakker ville blive opgraderet:~%~{~a~%~}~%" -#: guix/ui.scm:995 +#: guix/ui.scm:1038 #, scheme-format msgid "The following package will be upgraded:~%~{~a~%~}~%" msgid_plural "The following packages will be upgraded:~%~{~a~%~}~%" msgstr[0] "Den følgende pakke vil blive opgraderet:~%~{~a~%~}~%" msgstr[1] "De følgende pakker vil blive opgraderet:~%~{~a~%~}~%" -#: guix/ui.scm:1006 +#: guix/ui.scm:1049 #, scheme-format msgid "The following package would be installed:~%~{~a~%~}~%" msgid_plural "The following packages would be installed:~%~{~a~%~}~%" msgstr[0] "Den følgende pakke ville blive installeret:~%~{~a~%~}~%" msgstr[1] "De følgende pakker ville blive installeret:~%~{~a~%~}~%" -#: guix/ui.scm:1011 +#: guix/ui.scm:1054 #, scheme-format msgid "The following package will be installed:~%~{~a~%~}~%" msgid_plural "The following packages will be installed:~%~{~a~%~}~%" msgstr[0] "Den følgende pakke vil blive installeret:~%~{~a~%~}~%" msgstr[1] "De følgende pakker vil blive installeret:~%~{~a~%~}~%" -#: guix/ui.scm:1028 +#: guix/ui.scm:1071 msgid "" msgstr "" -#: guix/ui.scm:1390 +#: guix/ui.scm:1436 #, scheme-format msgid "Generation ~a\t~a" msgstr "Generation ~a\t~a" @@ -3474,7 +3714,7 @@ msgstr "Generation ~a\t~a" #. usual way of presenting dates in your locale. #. See https://www.gnu.org/software/guile/manual/html_node/SRFI_002d19-Date-to-string.html #. for details. -#: guix/ui.scm:1399 +#: guix/ui.scm:1445 #, scheme-format msgid "~b ~d ~Y ~T" msgstr "~b ~d ~Y ~T" @@ -3482,27 +3722,27 @@ msgstr "~b ~d ~Y ~T" #. TRANSLATORS: The word "current" here is an adjective for #. "Generation", as in "current generation". Use the appropriate #. gender where applicable. -#: guix/ui.scm:1405 +#: guix/ui.scm:1451 #, scheme-format msgid "~a\t(current)~%" msgstr "~a\t(nuværende)~%" -#: guix/ui.scm:1448 +#: guix/ui.scm:1494 #, scheme-format msgid "switched from generation ~a to ~a~%" msgstr "skiftede fra generation ~a til ~a~%" -#: guix/ui.scm:1464 +#: guix/ui.scm:1510 #, scheme-format msgid "deleting ~a~%" msgstr "sletter ~a~%" -#: guix/ui.scm:1495 +#: guix/ui.scm:1541 #, scheme-format msgid "Try `guix --help' for more information.~%" msgstr "Prøv »guix --help« for yderligere information.~%" -#: guix/ui.scm:1523 +#: guix/ui.scm:1569 msgid "" "Usage: guix COMMAND ARGS...\n" "Run COMMAND with ARGS.\n" @@ -3510,25 +3750,105 @@ msgstr "" "Brug: guix KOMMANDO ARG...\n" "Kør KOMMANDO med ARG.\n" -#: guix/ui.scm:1526 +#: guix/ui.scm:1572 msgid "COMMAND must be one of the sub-commands listed below:\n" msgstr "KOMMANDO skal være en af underkommandoerne vist nedenfor:\n" -#: guix/ui.scm:1546 +#: guix/ui.scm:1592 #, scheme-format msgid "guix: ~a: command not found~%" msgstr "guix: ~a: kommando blev ikke fundet~%" -#: guix/ui.scm:1576 +#: guix/ui.scm:1622 #, scheme-format msgid "guix: missing command name~%" msgstr "guix: mangler kommandonavn~%" -#: guix/ui.scm:1584 +#: guix/ui.scm:1630 #, scheme-format msgid "guix: unrecognized option '~a'~%" msgstr "guix: ikke genkendt tilvalg »~a«~%" +#: guix/status.scm:335 +#, scheme-format +msgid "applying ~a graft for ~a..." +msgid_plural "applying ~a grafts for ~a..." +msgstr[0] "anvender ~a graft for ~a..." +msgstr[1] "anvender ~a grafter for ~a..." + +#: guix/status.scm:340 +#, scheme-format +msgid "building ~a..." +msgstr "kompilerer ~a..." + +#: guix/status.scm:344 +#, scheme-format +msgid "successfully built ~a" +msgstr "kompilering lykkedes ~a" + +#: guix/status.scm:350 +#, scheme-format +msgid "The following build is still in progress:~%~{ ~a~%~}~%" +msgid_plural "The following builds are still in progress:~%~{ ~a~%~}~%" +msgstr[0] "Den følgende kompilering er stadig i gang:~%~{ ~a~%~}~%" +msgstr[1] "De følgende kompileringer er stadig i gang:~%~{ ~a~%~}~%" + +#: guix/status.scm:355 +#, scheme-format +msgid "build of ~a failed" +msgstr "kompilering af ~a mislykkedes" + +#: guix/status.scm:359 +#, scheme-format +msgid "Could not find build log for '~a'." +msgstr "Kunne ikke finde kompileringslog for »~a«." + +#: guix/status.scm:362 +#, scheme-format +msgid "View build log at '~a'." +msgstr "Vis kompileringslog ved »~a«." + +#: guix/status.scm:366 +#, scheme-format +msgid "substituting ~a..." +msgstr "erstatter ~a..." + +#: guix/status.scm:369 +#, scheme-format +msgid "downloading from ~a..." +msgstr "henter fra ~a..." + +#: guix/status.scm:394 +#, scheme-format +msgid "substitution of ~a complete" +msgstr "substitution af ~a færdig" + +#: guix/status.scm:397 +#, scheme-format +msgid "substitution of ~a failed" +msgstr "substituion af ~a mislykkedes" + +#. TRANSLATORS: The final string looks like "sha256 hash mismatch for +#. /gnu/store/…-sth:", where "sha256" is the hash algorithm. +#: guix/status.scm:402 +#, scheme-format +msgid "~a hash mismatch for ~a:" +msgstr "~a hash mismatch for ~a:" + +#: guix/status.scm:404 +#, scheme-format +msgid "" +" expected hash: ~a\n" +" actual hash: ~a~%" +msgstr "" +" forventet hash: ~a\n" +" faktisk hash: ~a~%" + +#: guix/status.scm:409 +#, scheme-format +msgid "offloading build of ~a to '~a'" +msgstr "losser kompilering af ~a til »~a«" + #: guix/http-client.scm:117 #, scheme-format msgid "following redirection to `~a'...~%" @@ -3539,48 +3859,77 @@ msgstr "følger omdirigering til »~a«...~%" msgid "~a: HTTP download failed: ~a (~s)" msgstr "~a: HTTP-overførsel mislykkede: ~a (~s)" -#: guix/nar.scm:156 +#: guix/nar.scm:157 msgid "signature is not a valid s-expression" msgstr "signatur er ikke et gyldigt s-udtryk" -#: guix/nar.scm:165 +#: guix/nar.scm:166 msgid "invalid signature" msgstr "ugyldig signatur" -#: guix/nar.scm:169 +#: guix/nar.scm:170 msgid "invalid hash" msgstr "ugyldig hash" -#: guix/nar.scm:177 +#: guix/nar.scm:178 msgid "unauthorized public key" msgstr "uautoriseret offentlig nøgle" -#: guix/nar.scm:182 +#: guix/nar.scm:183 msgid "corrupt signature data" msgstr "ødelagt signaturdata" -#: guix/nar.scm:202 +#: guix/nar.scm:203 msgid "corrupt file set archive" msgstr "ødelagt filsætarkiv" -#: guix/nar.scm:212 +#: guix/nar.scm:213 #, scheme-format msgid "importing file or directory '~a'...~%" msgstr "importerer fil eller mappe »~a«...~%" -#: guix/nar.scm:223 +#: guix/nar.scm:224 #, scheme-format msgid "found valid signature for '~a'~%" msgstr "fandt gyldig signatur for »~a«~%" -#: guix/nar.scm:230 +#: guix/nar.scm:231 msgid "imported file lacks a signature" msgstr "importeret fil mangler en signatur" -#: guix/nar.scm:269 +#: guix/nar.scm:270 msgid "invalid inter-file archive mark" msgstr "ugyldig arkivmærke for mellemfil" +#: guix/channels.scm:108 +#, scheme-format +msgid "Updating channel '~a' from Git repository at '~a'...~%" +msgstr "Opdaterer kanal »~a« fra Git-arkiv på »~a«...~%" + +#: guix/profiles.scm:501 +msgid "unsupported manifest format" +msgstr "ikke understøttet manifest-format" + +#: guix/profiles.scm:1630 +#, scheme-format +msgid "while creating directory `~a': ~a" +msgstr "under oprettelse af mappen »~a«: ~a" + +#: guix/profiles.scm:1635 +#, scheme-format +msgid "Please create the @file{~a} directory, with you as the owner." +msgstr "Opret venligst mappen @file{~a}, med dig som ejer." + +#: guix/profiles.scm:1644 +#, scheme-format +msgid "directory `~a' is not owned by you" +msgstr "mappen »~a« er ikke ejet af dig" + +#: guix/profiles.scm:1648 +#, scheme-format +msgid "Please change the owner of @file{~a} to user ~s." +msgstr "Ændr venligst ejeren af @file{~a} til brugeren ~s." + #: nix/nix-daemon/guix-daemon.cc:66 msgid "guix-daemon -- perform derivation builds and store accesses" msgstr "guix-daemon – udfør derivatkompileringer og lageradgange" @@ -3704,3 +4053,29 @@ msgstr "lyt efter forbindelser på SOKKEL" #: nix/nix-daemon/guix-daemon.cc:156 msgid "produce debugging output" msgstr "lav fejlsøgningsinformation" + +#~ msgid "Try \"info '(guix) Invoking guix package'\" for more information.~%" +#~ msgstr "Prøv »info '(guix) Invoking guix package'« for yderligere information.~%" + +#~ msgid "" +#~ "Guile-Git is missing but it is now required by 'guix pull'.\n" +#~ "Install it by running:\n" +#~ "\n" +#~ " guix package -i ~a\n" +#~ " export GUILE_LOAD_PATH=$HOME/.guix-profile/share/guile/site/~a:$GUILE_LOAD_PATH\n" +#~ " export GUILE_LOAD_COMPILED_PATH=$HOME/.guix-profile/lib/guile/~a/site-ccache:$GUILE_LOAD_COMPILED_PATH\n" +#~ "\n" +#~ msgstr "" +#~ "Guile-Git mangler men er nu krævet af »guix pull«.\n" +#~ "Installer den ved at køre:\n" +#~ "\n" +#~ " guix package -i ~a\n" +#~ " export GUILE_LOAD_PATH=$HOME/.guix-profile/share/guile/site/~a:$GUILE_LOAD_PATH\n" +#~ " export GUILE_LOAD_COMPILED_PATH=$HOME/.guix-profile/lib/guile/~a/site-ccache:$GUILE_LOAD_COMPILED_PATH\n" +#~ "\n" + +#~ msgid "cannot enforce use of the Let's Encrypt certificates~%" +#~ msgstr "kan ikke gennemtvinge brugen af Let's Encrypt-certifikater~%" + +#~ msgid "please upgrade Guile-Git~%" +#~ msgstr "opgrader venligst Guile-Git~%" diff --git a/po/packages/da.po b/po/packages/da.po index be9115ef63..016eaaa852 100644 --- a/po/packages/da.po +++ b/po/packages/da.po @@ -1,14 +1,14 @@ # Danish translation guix-packages. # Copyright (C) 2017 Free Software Foundation, Inc. # This file is distributed under the same license as the guix package. -# Joe Hansen , 2015, 2016, 2017, 2018. +# Joe Hansen , 2015, 2016, 2017, 2018, 2019. # msgid "" msgstr "" -"Project-Id-Version: guix-packages 0.15.0-pre1\n" +"Project-Id-Version: guix-packages 0.16.0\n" "Report-Msgid-Bugs-To: ludo@gnu.org\n" -"POT-Creation-Date: 2018-04-27 19:13+0200\n" -"PO-Revision-Date: 2018-06-16 19:30+01:00\n" +"POT-Creation-Date: 2018-11-28 15:05+0100\n" +"PO-Revision-Date: 2019-02-05 19:30+01:00\n" "Last-Translator: Joe Hansen \n" "Language-Team: Danish \n" "Language: da\n" @@ -37,11 +37,11 @@ msgstr "" "som kan bruges i dit daglige arbejde, personlige behov, eller bare\n" "god gammeldags skrivning." -#: gnu/packages/aspell.scm:70 gnu/packages/libreoffice.scm:718 +#: gnu/packages/aspell.scm:85 gnu/packages/libreoffice.scm:777 msgid "Spell checker" msgstr "Stavekontrol" -#: gnu/packages/aspell.scm:72 +#: gnu/packages/aspell.scm:87 msgid "" "Aspell is a spell-checker which can be used either as a library or as\n" "a standalone program. Notable features of Aspell include its full support of\n" @@ -53,45 +53,45 @@ msgstr "" "fulde understøttelse af dokumenter skrivet i UTF-8-kodning og dets evne\n" "til at bruge flere ordbøger, inklusive personlige." -#: gnu/packages/aspell.scm:114 +#: gnu/packages/aspell.scm:129 msgid "This package provides a dictionary for the GNU Aspell spell checker." msgstr "Denne pakke tilbyder en ordbog for stavekontrollen GNU Aspell." -#: gnu/packages/aspell.scm:295 gnu/packages/libreoffice.scm:768 +#: gnu/packages/aspell.scm:310 gnu/packages/libreoffice.scm:827 msgid "" "This package provides a dictionary for the Hunspell spell-checking\n" "library." msgstr "Denne pakke tilbyder en ordbog for stavekontrolbiblioteket Hunspell." -#: gnu/packages/aspell.scm:313 +#: gnu/packages/aspell.scm:328 msgid "Hunspell dictionary for English" msgstr "Hunspell-ordbog for engelsk" -#: gnu/packages/aspell.scm:317 +#: gnu/packages/aspell.scm:332 msgid "Hunspell dictionary for Australian English" msgstr "Hunspell-ordbog for australsk engelsk" -#: gnu/packages/aspell.scm:321 +#: gnu/packages/aspell.scm:336 msgid "Hunspell dictionary for Canadian English" msgstr "Hunspell-ordbog fro canadisk-engelsk" -#: gnu/packages/aspell.scm:325 +#: gnu/packages/aspell.scm:340 msgid "Hunspell dictionary for British English, with -ise endings" msgstr "Hunspell-ordbog for britisk engelsk, med -ise-endelser" -#: gnu/packages/aspell.scm:329 +#: gnu/packages/aspell.scm:344 msgid "Hunspell dictionary for British English, with -ize endings" msgstr "Hunspell-ordbog for britisk engelsk, med ize-endelser" -#: gnu/packages/aspell.scm:333 +#: gnu/packages/aspell.scm:348 msgid "Hunspell dictionary for United States English" msgstr "Hunspell-ordbog for amerikansk engelsk" -#: gnu/packages/audio.scm:135 +#: gnu/packages/audio.scm:140 msgid "Realtime modular synthesizer and effect processor" msgstr "" -#: gnu/packages/audio.scm:137 +#: gnu/packages/audio.scm:142 msgid "" "AlsaModularSynth is a digital implementation of a classical analog\n" "modular synthesizer system. It uses virtual control voltages to control the\n" @@ -100,11 +100,11 @@ msgid "" "Filter) modules follow the convention of 1V / Octave." msgstr "" -#: gnu/packages/audio.scm:174 +#: gnu/packages/audio.scm:181 msgid "Library for audio labelling" msgstr "" -#: gnu/packages/audio.scm:176 +#: gnu/packages/audio.scm:183 msgid "" "aubio is a tool designed for the extraction of annotations from audio\n" "signals. Its features include segmenting a sound file before each of its\n" @@ -112,33 +112,44 @@ msgid "" "streams from live audio." msgstr "" -#: gnu/packages/audio.scm:277 +#: gnu/packages/audio.scm:285 msgid "Digital audio workstation" msgstr "Digital lydarbejdsstation" -#: gnu/packages/audio.scm:279 +#: gnu/packages/audio.scm:287 msgid "" "Ardour is a multi-channel digital audio workstation, allowing users to\n" "record, edit, mix and master audio and MIDI projects. It is targeted at audio\n" "engineers, musicians, soundtrack editors and composers." msgstr "" -#: gnu/packages/audio.scm:415 +#: gnu/packages/audio.scm:425 msgid "Software for recording and editing sounds" msgstr "Program til at optage og redigere lyde" -#: gnu/packages/audio.scm:417 +#: gnu/packages/audio.scm:427 msgid "" "Audacity is a multi-track audio editor designed for recording, playing\n" "and editing digital audio. It features digital effects and spectrum analysis\n" "tools." msgstr "" -#: gnu/packages/audio.scm:452 +#: gnu/packages/audio.scm:463 +msgid "Pitch-correction LADSPA audio plugin" +msgstr "" + +#: gnu/packages/audio.scm:465 +msgid "" +"Autotalent is a LADSPA plugin for real-time pitch-correction. Among its\n" +"controls are allowable notes, strength of correction, LFO for vibrato and\n" +"formant warp." +msgstr "" + +#: gnu/packages/audio.scm:509 msgid "Tonewheel organ synthesizer" msgstr "" -#: gnu/packages/audio.scm:454 +#: gnu/packages/audio.scm:511 msgid "" "AZR-3 is a port of the free VST plugin AZR-3. It is a tonewheel organ\n" "with drawbars, distortion and rotating speakers. The organ has three\n" @@ -147,11 +158,11 @@ msgid "" "plugins are provided." msgstr "" -#: gnu/packages/audio.scm:491 +#: gnu/packages/audio.scm:548 msgid "Audio plug-in pack for LV2 and JACK environments" msgstr "Lydudvidelsesmpakke for LV2- og JACK-miljøer" -#: gnu/packages/audio.scm:493 +#: gnu/packages/audio.scm:550 msgid "" "Calf Studio Gear is an audio plug-in pack for LV2 and JACK environments.\n" "The suite contains lots of effects (delay, modulation, signal processing,\n" @@ -160,11 +171,22 @@ msgid "" "tools (analyzer, mono/stereo tools, crossovers)." msgstr "" -#: gnu/packages/audio.scm:545 +#: gnu/packages/audio.scm:593 +msgid "LV2 port of the CAPS audio plugin colection" +msgstr "LV2-port af samlingen af CAPS-lydudvidelsesmoduler" + +#: gnu/packages/audio.scm:595 +msgid "" +"LV2 port of CAPS, a collection of audio plugins comprising basic virtual\n" +"guitar amplification and a small range of classic effects, signal processors and\n" +"generators of mostly elementary and occasionally exotic nature." +msgstr "" + +#: gnu/packages/audio.scm:645 msgid "Software speech synthesizer" msgstr "Programsynthesizer for tale" -#: gnu/packages/audio.scm:546 +#: gnu/packages/audio.scm:646 msgid "" "eSpeak is a software speech synthesizer for English and\n" "other languages. eSpeak uses a \"formant synthesis\" method. This allows many\n" @@ -173,22 +195,22 @@ msgid "" "based on human speech recordings." msgstr "" -#: gnu/packages/audio.scm:593 +#: gnu/packages/audio.scm:685 msgid "LV2 plugins for live use" msgstr "LV2-udvidelsesmoduler for live brug" -#: gnu/packages/audio.scm:595 +#: gnu/packages/audio.scm:687 msgid "" "The infamous plugins are a collection of LV2 audio plugins for live\n" "performances. The plugins include a cellular automaton synthesizer, an\n" "envelope follower, distortion effects, tape effects and more." msgstr "" -#: gnu/packages/audio.scm:636 +#: gnu/packages/audio.scm:729 msgid "SWH plugins in LV2 format" msgstr "SWH-udvidelsesmoduler i LV2-format" -#: gnu/packages/audio.scm:638 +#: gnu/packages/audio.scm:731 msgid "" "Swh-plugins-lv2 is a collection of audio plugins in LV2 format. Plugin\n" "classes include: dynamics (compressor, limiter), time (delay, chorus,\n" @@ -196,21 +218,21 @@ msgid "" "emulation (valve, tape), bit fiddling (decimator, pointer-cast), etc." msgstr "" -#: gnu/packages/audio.scm:672 +#: gnu/packages/audio.scm:765 msgid "Sound and music computing system" msgstr "Lyd- og musikberegningsystem" -#: gnu/packages/audio.scm:674 +#: gnu/packages/audio.scm:767 msgid "" "Csound is a user-programmable and user-extensible sound processing\n" "language and software synthesizer." msgstr "" -#: gnu/packages/audio.scm:715 gnu/packages/audio.scm:2984 +#: gnu/packages/audio.scm:808 gnu/packages/audio.scm:3085 msgid "C++ wrapper around the ALSA API" msgstr "C++-omslag omkring ALSA API'en" -#: gnu/packages/audio.scm:717 +#: gnu/packages/audio.scm:810 msgid "" "clalsadrv is a C++ wrapper around the ALSA API simplifying access to\n" "ALSA PCM devices." @@ -218,22 +240,22 @@ msgstr "" "Clalsadrv er et C++-omslag omkring ALSA API'en, der forenkler adgang til\n" "ALSA PCM-enheder." -#: gnu/packages/audio.scm:754 +#: gnu/packages/audio.scm:847 msgid "LADSPA ambisonics plugins" msgstr "" -#: gnu/packages/audio.scm:756 +#: gnu/packages/audio.scm:849 msgid "" "The AMB plugins are a set of LADSPA ambisonics plugins, mainly to be\n" "used within Ardour. Features include: mono and stereo to B-format panning,\n" "horizontal rotator, square, hexagon and cube decoders." msgstr "" -#: gnu/packages/audio.scm:791 +#: gnu/packages/audio.scm:884 msgid "Chorus, phaser, and vintage high-pass and low-pass filters" msgstr "" -#: gnu/packages/audio.scm:793 +#: gnu/packages/audio.scm:886 msgid "" "This package provides various LADSPA plugins. @code{cs_chorus} and\n" "@code{cs_phaser} provide chorus and phaser effects, respectively;\n" @@ -243,21 +265,21 @@ msgid "" "the non-linear circuit elements of their original analog counterparts." msgstr "" -#: gnu/packages/audio.scm:831 +#: gnu/packages/audio.scm:924 msgid "LADSPA reverb plugin" msgstr "" -#: gnu/packages/audio.scm:833 +#: gnu/packages/audio.scm:926 msgid "" "This package provides a stereo reverb LADSPA plugin based on the\n" "well-known greverb." msgstr "" -#: gnu/packages/audio.scm:867 +#: gnu/packages/audio.scm:960 msgid "LADSPA four-band parametric equalizer plugin" msgstr "" -#: gnu/packages/audio.scm:869 +#: gnu/packages/audio.scm:962 msgid "" "This package provides a LADSPA plugin for a four-band parametric\n" "equalizer. Each section has an active/bypass switch, frequency, bandwidth and\n" @@ -272,11 +294,11 @@ msgid "" "for stage use." msgstr "" -#: gnu/packages/audio.scm:912 +#: gnu/packages/audio.scm:1005 msgid "LADSPA stereo width plugin" msgstr "LADSPA-stereo med udvidelsesmodul" -#: gnu/packages/audio.scm:914 +#: gnu/packages/audio.scm:1007 msgid "" "This package provides a LADSPA plugin to manipulate the stereo width of\n" "audio signals." @@ -284,11 +306,11 @@ msgstr "" "Denne pakke tilbyder et LADSPA-udvidelsesmodul til at manipulere stereodyben\n" "for lydsignaler." -#: gnu/packages/audio.scm:949 +#: gnu/packages/audio.scm:1042 msgid "LADSPA plugin for synthesizer oscillators" msgstr "LADSPA-udvidelsesmodul for synthesizeroscillatorer" -#: gnu/packages/audio.scm:951 +#: gnu/packages/audio.scm:1044 msgid "" "The @code{blvco} LADSPA plugin provides three anti-aliased oscillators:\n" "\n" @@ -303,11 +325,11 @@ msgid "" "output of analog synthesizers such as the Moog Voyager." msgstr "" -#: gnu/packages/audio.scm:993 +#: gnu/packages/audio.scm:1086 msgid "LADSPA Autowah effect plugin" msgstr "" -#: gnu/packages/audio.scm:995 +#: gnu/packages/audio.scm:1088 msgid "" "This package provides a LADSPA plugin for a Wah effect with envelope\n" "follower." @@ -315,19 +337,19 @@ msgstr "" "Denne pakke tilbyder et LADSPA-udvidelsesmodul for wn Wah-effekt med\n" "kuvertfølger." -#: gnu/packages/audio.scm:1029 +#: gnu/packages/audio.scm:1122 msgid "LADSPA stereo reverb plugin" msgstr "" -#: gnu/packages/audio.scm:1031 +#: gnu/packages/audio.scm:1124 msgid "This package provides a LADSPA plugin for a stereo reverb effect." msgstr "Denne pakke tilbyder et LADSPA-udvidelsesmodul for en stereo reverb-effekt." -#: gnu/packages/audio.scm:1070 +#: gnu/packages/audio.scm:1163 msgid "SoundFont synthesizer" msgstr "SoundFont-synthesizer" -#: gnu/packages/audio.scm:1072 +#: gnu/packages/audio.scm:1165 msgid "" "FluidSynth is a real-time software synthesizer based on the SoundFont 2\n" "specifications. FluidSynth reads and handles MIDI events from the MIDI input\n" @@ -335,11 +357,11 @@ msgid "" "also play midifiles using a Soundfont." msgstr "" -#: gnu/packages/audio.scm:1103 +#: gnu/packages/audio.scm:1212 msgid "MPEG-4 and MPEG-2 AAC decoder" msgstr "MPEG-4- og MPEG-2 AAC-afkoder" -#: gnu/packages/audio.scm:1105 +#: gnu/packages/audio.scm:1214 msgid "" "FAAD2 is an MPEG-4 and MPEG-2 AAC decoder supporting LC, Main, LTP, SBR,\n" "PS, and DAB+." @@ -347,29 +369,29 @@ msgstr "" "FAAD2 er en MPEG-4- og MPEG-2 AAC-afkoder, der understøtter LC, Main, LTP, SBR,\n" "PS og DAB+." -#: gnu/packages/audio.scm:1145 +#: gnu/packages/audio.scm:1254 msgid "Signal processing language" msgstr "Signalbehandlingssprog" -#: gnu/packages/audio.scm:1147 +#: gnu/packages/audio.scm:1256 msgid "Faust is a programming language for realtime audio signal processing." msgstr "Faust er et programmeringssprog for behandling af lydsignaler i realtid." -#: gnu/packages/audio.scm:1217 +#: gnu/packages/audio.scm:1323 msgid "GUS compatible patches for MIDI players" msgstr "" -#: gnu/packages/audio.scm:1219 +#: gnu/packages/audio.scm:1325 msgid "" "FreePats is a project to create a free and open set of GUS compatible\n" "patches that can be used with softsynths such as Timidity and WildMidi." msgstr "" -#: gnu/packages/audio.scm:1271 +#: gnu/packages/audio.scm:1378 msgid "Virtual guitar amplifier" msgstr "" -#: gnu/packages/audio.scm:1272 +#: gnu/packages/audio.scm:1379 msgid "" "Guitarix is a virtual guitar amplifier running JACK.\n" "Guitarix takes the signal from your guitar as a mono-signal from your sound\n" @@ -380,11 +402,11 @@ msgid "" "auto-wah." msgstr "" -#: gnu/packages/audio.scm:1326 +#: gnu/packages/audio.scm:1433 msgid "Audio effects processor" msgstr "" -#: gnu/packages/audio.scm:1328 +#: gnu/packages/audio.scm:1435 msgid "" "Rakarrack is a richly featured multi-effects processor emulating a\n" "guitar effects pedalboard. Effects include compressor, expander, noise gate,\n" @@ -396,22 +418,22 @@ msgid "" "well suited to all musical instruments and vocals." msgstr "" -#: gnu/packages/audio.scm:1379 +#: gnu/packages/audio.scm:1486 msgid "LV2 convolution reverb" msgstr "" -#: gnu/packages/audio.scm:1381 +#: gnu/packages/audio.scm:1488 msgid "" "IR is a low-latency, real-time, high performance signal convolver\n" "especially for creating reverb effects. It supports impulse responses with 1,\n" "2 or 4 channels, in any soundfile format supported by libsndfile." msgstr "" -#: gnu/packages/audio.scm:1411 +#: gnu/packages/audio.scm:1526 msgid "JACK audio connection kit" msgstr "" -#: gnu/packages/audio.scm:1413 +#: gnu/packages/audio.scm:1528 msgid "" "JACK is a low-latency audio server. It can connect a number of\n" "different applications to an audio device, as well as allowing them to share\n" @@ -421,32 +443,32 @@ msgid "" "synchronous execution of all clients, and low latency operation." msgstr "" -#: gnu/packages/audio.scm:1509 +#: gnu/packages/audio.scm:1624 msgid "Simple LV2 host for JACK" msgstr "" -#: gnu/packages/audio.scm:1511 +#: gnu/packages/audio.scm:1626 msgid "" "Jalv is a simple but fully featured LV2 host for JACK. It runs LV2\n" "plugins and exposes their ports as JACK ports, essentially making any LV2\n" "plugin function as a JACK application." msgstr "" -#: gnu/packages/audio.scm:1554 +#: gnu/packages/audio.scm:1669 msgid "Linux Audio Developer's Simple Plugin API (LADSPA)" msgstr "" -#: gnu/packages/audio.scm:1556 +#: gnu/packages/audio.scm:1671 msgid "" "LADSPA is a standard that allows software audio processors and effects\n" "to be plugged into a wide range of audio synthesis and recording packages." msgstr "" -#: gnu/packages/audio.scm:1602 +#: gnu/packages/audio.scm:1717 msgid "Audio application session manager" msgstr "" -#: gnu/packages/audio.scm:1604 +#: gnu/packages/audio.scm:1719 msgid "" "LASH is a session management system for audio applications. It allows\n" "you to save and restore audio sessions consisting of multiple interconneced\n" @@ -454,11 +476,11 @@ msgid "" "connections between them." msgstr "" -#: gnu/packages/audio.scm:1625 +#: gnu/packages/audio.scm:1740 msgid "Bauer stereophonic-to-binaural DSP" msgstr "" -#: gnu/packages/audio.scm:1627 +#: gnu/packages/audio.scm:1742 msgid "" "The Bauer stereophonic-to-binaural DSP (bs2b) library and plugins is\n" "designed to improve headphone listening of stereo audio records. Recommended\n" @@ -466,21 +488,21 @@ msgid "" "essential distortions." msgstr "" -#: gnu/packages/audio.scm:1650 +#: gnu/packages/audio.scm:1765 msgid "Implementation of the Open Sound Control protocol" msgstr "" -#: gnu/packages/audio.scm:1652 +#: gnu/packages/audio.scm:1767 msgid "" "liblo is a lightweight library that provides an easy to use\n" "implementation of the Open Sound Control (@dfn{OSC}) protocol." msgstr "" -#: gnu/packages/audio.scm:1675 +#: gnu/packages/audio.scm:1790 msgid "Bindings for PortAudio v19" msgstr "Bindinger for PortAudio v19" -#: gnu/packages/audio.scm:1676 +#: gnu/packages/audio.scm:1791 msgid "" "This package provides bindings for PortAudio v19, the\n" "cross-platform audio input/output stream library." @@ -488,11 +510,11 @@ msgstr "" "Denne pakke tilbyder bindinger for PortAudio v19,\n" "lydinddata/uddata-udsendelsesbiblioteket for flere platforme." -#: gnu/packages/audio.scm:1701 +#: gnu/packages/audio.scm:1816 msgid "Python bindings for liblo" msgstr "Pythonbindinger for liblo" -#: gnu/packages/audio.scm:1703 +#: gnu/packages/audio.scm:1818 msgid "" "Pyliblo is a Python wrapper for the liblo Open Sound Control (OSC)\n" "library. It supports almost the complete functionality of liblo, allowing you\n" @@ -500,22 +522,22 @@ msgid "" "included are the command line utilities @code{send_osc} and @code{dump_osc}." msgstr "" -#: gnu/packages/audio.scm:1744 +#: gnu/packages/audio.scm:1859 msgid "Library to simplify use of LV2 plugins in applications" msgstr "Bibliotek til at forenkle bruge af LV2-udvidelsesmoduler i programmer" -#: gnu/packages/audio.scm:1746 +#: gnu/packages/audio.scm:1861 msgid "" "Lilv is a C library to make the use of LV2 plugins as simple as possible\n" "for applications. Lilv is the successor to SLV2, rewritten to be\n" "significantly faster and have minimal dependencies." msgstr "" -#: gnu/packages/audio.scm:1772 +#: gnu/packages/audio.scm:1887 msgid "LV2 audio plugin specification" msgstr "" -#: gnu/packages/audio.scm:1774 +#: gnu/packages/audio.scm:1889 msgid "" "LV2 is an open specification for audio plugins and host applications.\n" "At its core, LV2 is a simple stable interface, accompanied by extensions which\n" @@ -523,38 +545,38 @@ msgid "" "software." msgstr "" -#: gnu/packages/audio.scm:1826 +#: gnu/packages/audio.scm:1941 msgid "LV2 port of the mda Piano plugin" msgstr "LV2-port af mda Piano-udvidelsesmodulet" -#: gnu/packages/audio.scm:1827 +#: gnu/packages/audio.scm:1942 msgid "An LV2 port of the mda Piano VSTi." msgstr "En LV2-port af mda Piano VSTi." -#: gnu/packages/audio.scm:1840 +#: gnu/packages/audio.scm:1955 msgid "LV2 port of the mda EPiano plugin" msgstr "LV2-port af mda EPiano-udvidelsesmodulet" -#: gnu/packages/audio.scm:1841 +#: gnu/packages/audio.scm:1956 msgid "An LV2 port of the mda EPiano VSTi." msgstr "En LV2-port af mda EPiano VSTi." -#: gnu/packages/audio.scm:1886 +#: gnu/packages/audio.scm:2001 msgid "C++ libraries for LV2 plugins" msgstr "C++-biblioteker for LV2-udvidelsesmoduler" -#: gnu/packages/audio.scm:1888 +#: gnu/packages/audio.scm:2003 msgid "" "The LV2 Toolkit (LVTK) contains libraries that wrap the LV2 C API and\n" "extensions into easy to use C++ classes. It is the successor of\n" "lv2-c++-tools." msgstr "" -#: gnu/packages/audio.scm:1929 +#: gnu/packages/audio.scm:2044 msgid "3D audio API" msgstr "" -#: gnu/packages/audio.scm:1931 +#: gnu/packages/audio.scm:2046 msgid "" "OpenAL provides capabilities for playing audio in a virtual 3D\n" "environment. Distance attenuation, doppler shift, and directional sound\n" @@ -564,50 +586,50 @@ msgid "" "buffers, and audio capture." msgstr "" -#: gnu/packages/audio.scm:1961 +#: gnu/packages/audio.scm:2076 msgid "Free implementation of OpenAL's ALUT standard" msgstr "Fri implementering af OpenAL's ALUT-standard" -#: gnu/packages/audio.scm:1962 +#: gnu/packages/audio.scm:2077 msgid "freealut is the OpenAL Utility Toolkit." msgstr "freealut er OpenAL Utility Toolkit." -#: gnu/packages/audio.scm:1991 +#: gnu/packages/audio.scm:2106 msgid "Modular patch bay for audio and MIDI systems" msgstr "" -#: gnu/packages/audio.scm:1993 +#: gnu/packages/audio.scm:2108 msgid "" "Patchage is a modular patch bay for audio and MIDI systems based on JACK\n" "and ALSA." msgstr "" -#: gnu/packages/audio.scm:2020 +#: gnu/packages/audio.scm:2135 msgid "Jack server control application" msgstr "" -#: gnu/packages/audio.scm:2021 +#: gnu/packages/audio.scm:2136 msgid "" "Control a Jack server. Allows you to plug various sources\n" "into various outputs and to start, stop and configure jackd" msgstr "" -#: gnu/packages/audio.scm:2054 +#: gnu/packages/audio.scm:2169 msgid "Stereo audio recorder for JACK" msgstr "" -#: gnu/packages/audio.scm:2055 +#: gnu/packages/audio.scm:2170 msgid "" "QJackRcd is a simple graphical stereo recorder for JACK\n" "supporting silence processing for automatic pause, file splitting, and\n" "background file post-processing." msgstr "" -#: gnu/packages/audio.scm:2157 +#: gnu/packages/audio.scm:2267 msgid "Synthesis engine and programming language" msgstr "Syntesemotor og programmeringssprog" -#: gnu/packages/audio.scm:2158 +#: gnu/packages/audio.scm:2268 msgid "" "SuperCollider is a synthesis engine (@code{scsynth} or\n" "@code{supernova}) and programming language (@code{sclang}). It can be used\n" @@ -619,52 +641,52 @@ msgid "" "using GuixSD." msgstr "" -#: gnu/packages/audio.scm:2189 +#: gnu/packages/audio.scm:2299 msgid "Real-time audio utility library" msgstr "" -#: gnu/packages/audio.scm:2191 +#: gnu/packages/audio.scm:2301 msgid "" "Raul (Real-time Audio Utility Library) is a C++ utility library primarily\n" "aimed at audio/musical applications." msgstr "" -#: gnu/packages/audio.scm:2235 +#: gnu/packages/audio.scm:2345 msgid "Audio time-stretching and pitch-shifting library" msgstr "" -#: gnu/packages/audio.scm:2237 +#: gnu/packages/audio.scm:2347 msgid "" "Rubber Band is a library and utility program that permits changing the\n" "tempo and pitch of an audio recording independently of one another." msgstr "" -#: gnu/packages/audio.scm:2285 +#: gnu/packages/audio.scm:2391 msgid "Cross-platform MIDI library for C++" msgstr "" -#: gnu/packages/audio.scm:2287 +#: gnu/packages/audio.scm:2393 msgid "" "RtMidi is a set of C++ classes (RtMidiIn, RtMidiOut, and API specific\n" "classes) that provide a common cross-platform API for realtime MIDI\n" "input/output." msgstr "" -#: gnu/packages/audio.scm:2312 +#: gnu/packages/audio.scm:2418 msgid "Library for serialising LV2 atoms to/from RDF" msgstr "" -#: gnu/packages/audio.scm:2314 +#: gnu/packages/audio.scm:2420 msgid "" "Sratom is a library for serialising LV2 atoms to/from RDF, particularly\n" "the Turtle syntax." msgstr "" -#: gnu/packages/audio.scm:2342 +#: gnu/packages/audio.scm:2448 msgid "Library for loading and wrapping LV2 plugin UIs" msgstr "" -#: gnu/packages/audio.scm:2344 +#: gnu/packages/audio.scm:2450 msgid "" "Suil is a lightweight C library for loading and wrapping LV2 plugin UIs.\n" "\n" @@ -676,11 +698,11 @@ msgid "" "Suil currently supports every combination of Gtk, Qt, and X11." msgstr "" -#: gnu/packages/audio.scm:2401 +#: gnu/packages/audio.scm:2507 msgid "Software synthesizer for playing MIDI files" msgstr "" -#: gnu/packages/audio.scm:2403 +#: gnu/packages/audio.scm:2509 msgid "" "TiMidity++ is a software synthesizer. It can play MIDI files by\n" "converting them into PCM waveform data; give it a MIDI data along with digital\n" @@ -689,43 +711,43 @@ msgid "" "disks as various audio file formats." msgstr "" -#: gnu/packages/audio.scm:2441 +#: gnu/packages/audio.scm:2547 msgid "Modular and extensible audio processing system" msgstr "" -#: gnu/packages/audio.scm:2443 +#: gnu/packages/audio.scm:2549 msgid "" "Vamp is an audio processing plugin system for plugins that extract\n" "descriptive information from audio data — typically referred to as audio\n" "analysis plugins or audio feature extraction plugins." msgstr "" -#: gnu/packages/audio.scm:2482 +#: gnu/packages/audio.scm:2588 msgid "Library for time stretching and pitch scaling of audio" msgstr "" -#: gnu/packages/audio.scm:2484 +#: gnu/packages/audio.scm:2590 msgid "" "SBSMS (Subband Sinusoidal Modeling Synthesis) is software for time\n" "stretching and pitch scaling of audio. This package contains the library." msgstr "" -#: gnu/packages/audio.scm:2506 +#: gnu/packages/audio.scm:2612 msgid "Hybrid lossless audio codec" msgstr "" -#: gnu/packages/audio.scm:2508 +#: gnu/packages/audio.scm:2614 msgid "" "WavPack is an audio compression format with lossless, lossy and hybrid\n" "compression modes. This package contains command-line programs and library to\n" "encode and decode wavpack files." msgstr "" -#: gnu/packages/audio.scm:2527 +#: gnu/packages/audio.scm:2633 msgid "Mod file playing library" msgstr "" -#: gnu/packages/audio.scm:2529 +#: gnu/packages/audio.scm:2635 msgid "" "Libmodplug renders mod music files as raw audio data, for playing or\n" "conversion. mod, .s3m, .it, .xm, and a number of lesser-known formats are\n" @@ -733,33 +755,33 @@ msgid "" "surround and reverb." msgstr "" -#: gnu/packages/audio.scm:2548 +#: gnu/packages/audio.scm:2654 msgid "Module player library" msgstr "" -#: gnu/packages/audio.scm:2550 +#: gnu/packages/audio.scm:2656 msgid "" "Libxmp is a library that renders module files to PCM data. It supports\n" "over 90 mainstream and obscure module formats including Protracker (MOD),\n" "Scream Tracker 3 (S3M), Fast Tracker II (XM), and Impulse Tracker (IT)." msgstr "" -#: gnu/packages/audio.scm:2573 +#: gnu/packages/audio.scm:2679 msgid "Extended module player" msgstr "" -#: gnu/packages/audio.scm:2575 +#: gnu/packages/audio.scm:2681 msgid "" "Xmp is a portable module player that plays over 90 mainstream and\n" "obscure module formats, including Protracker MOD, Fasttracker II XM, Scream\n" "Tracker 3 S3M and Impulse Tracker IT files." msgstr "" -#: gnu/packages/audio.scm:2606 +#: gnu/packages/audio.scm:2709 msgid "Audio processing library for changing tempo, pitch and playback rate" msgstr "" -#: gnu/packages/audio.scm:2608 +#: gnu/packages/audio.scm:2711 msgid "" "SoundTouch is an audio processing library for changing the tempo, pitch\n" "and playback rates of audio streams or audio files. It is intended for\n" @@ -767,11 +789,11 @@ msgid "" "control functionality, or just for playing around with the sound effects." msgstr "" -#: gnu/packages/audio.scm:2645 +#: gnu/packages/audio.scm:2748 msgid "Sound processing utility" msgstr "" -#: gnu/packages/audio.scm:2647 +#: gnu/packages/audio.scm:2750 msgid "" "SoX (Sound eXchange) is a command line utility that can convert\n" "various formats of computer audio files to other formats. It can also\n" @@ -779,92 +801,92 @@ msgid "" "can play and record audio files." msgstr "" -#: gnu/packages/audio.scm:2670 +#: gnu/packages/audio.scm:2773 msgid "One-dimensional sample-rate conversion library" msgstr "" -#: gnu/packages/audio.scm:2672 +#: gnu/packages/audio.scm:2775 msgid "" "The SoX Resampler library (libsoxr) performs one-dimensional sample-rate\n" "conversion. It may be used, for example, to resample PCM-encoded audio." msgstr "" -#: gnu/packages/audio.scm:2702 +#: gnu/packages/audio.scm:2805 msgid "MPEG Audio Layer 2 (MP2) encoder" msgstr "" -#: gnu/packages/audio.scm:2704 +#: gnu/packages/audio.scm:2807 msgid "" "TwoLAME is an optimised MPEG Audio Layer 2 (MP2) encoder based on\n" "tooLAME by Mike Cheng, which in turn is based upon the ISO dist10 code and\n" "portions of LAME." msgstr "" -#: gnu/packages/audio.scm:2743 +#: gnu/packages/audio.scm:2840 msgid "Audio I/O library" msgstr "" -#: gnu/packages/audio.scm:2745 +#: gnu/packages/audio.scm:2842 msgid "" "PortAudio is a portable C/C++ audio I/O library providing a simple API\n" "to record and/or play sound using a callback function or a blocking read/write\n" "interface." msgstr "" -#: gnu/packages/audio.scm:2775 +#: gnu/packages/audio.scm:2872 msgid "Graphical user interface for FluidSynth" msgstr "" -#: gnu/packages/audio.scm:2777 +#: gnu/packages/audio.scm:2874 msgid "" "Qsynth is a GUI front-end application for the FluidSynth SoundFont\n" "synthesizer written in C++." msgstr "" -#: gnu/packages/audio.scm:2814 +#: gnu/packages/audio.scm:2911 msgid "Networked audio system" msgstr "" -#: gnu/packages/audio.scm:2816 +#: gnu/packages/audio.scm:2913 msgid "" "RSound allows you to send audio from an application and transfer it\n" "directly to a different computer on your LAN network. It is an audio daemon\n" "with a much different focus than most other audio daemons." msgstr "" -#: gnu/packages/audio.scm:2847 +#: gnu/packages/audio.scm:2944 msgid "JACK audio frequency analyzer and display" msgstr "" -#: gnu/packages/audio.scm:2849 +#: gnu/packages/audio.scm:2946 msgid "" "XJackFreak is an audio analysis and equalizing tool for the Jack Audio\n" "Connection Kit. It can display the FFT of any input, modify it and output the\n" "result." msgstr "" -#: gnu/packages/audio.scm:2893 +#: gnu/packages/audio.scm:2992 msgid "Fast, partitioned convolution engine library" msgstr "" -#: gnu/packages/audio.scm:2895 +#: gnu/packages/audio.scm:2994 msgid "" "Zita convolver is a C++ library providing a real-time convolution\n" "engine." msgstr "" -#: gnu/packages/audio.scm:2940 +#: gnu/packages/audio.scm:3041 msgid "C++ library for resampling audio signals" msgstr "" -#: gnu/packages/audio.scm:2942 +#: gnu/packages/audio.scm:3043 msgid "" "Libzita-resampler is a C++ library for resampling audio signals. It is\n" "designed to be used within a real-time processing context, to be fast, and to\n" "provide high-quality sample rate conversion." msgstr "" -#: gnu/packages/audio.scm:2986 +#: gnu/packages/audio.scm:3087 msgid "" "Zita-alsa-pcmi is a C++ wrapper around the ALSA API. It provides easy\n" "access to ALSA PCM devices, taking care of the many functions required to\n" @@ -872,11 +894,11 @@ msgid "" "point audio data." msgstr "" -#: gnu/packages/audio.scm:3017 +#: gnu/packages/audio.scm:3113 msgid "Cue and toc file parsers and utilities" msgstr "" -#: gnu/packages/audio.scm:3018 +#: gnu/packages/audio.scm:3114 msgid "" "Cuetools is a set of programs that are useful for manipulating\n" "and using CUE sheet (cue) files and Table of Contents (toc) files. CUE and TOC\n" @@ -884,11 +906,11 @@ msgid "" "machine-readable ASCII format." msgstr "" -#: gnu/packages/audio.scm:3037 +#: gnu/packages/audio.scm:3133 msgid "WAVE audio data processing tool" msgstr "" -#: gnu/packages/audio.scm:3038 +#: gnu/packages/audio.scm:3134 msgid "" "shntool is a multi-purpose WAVE data processing and reporting\n" "utility. File formats are abstracted from its core, so it can process any file\n" @@ -897,63 +919,63 @@ msgid "" "use them split WAVE data into multiple files." msgstr "" -#: gnu/packages/audio.scm:3076 +#: gnu/packages/audio.scm:3173 msgid "DTS Coherent Acoustics decoder" msgstr "" -#: gnu/packages/audio.scm:3077 +#: gnu/packages/audio.scm:3174 msgid "" "Dcadec is a DTS Coherent Acoustics surround sound decoder\n" "with support for HD extensions." msgstr "" -#: gnu/packages/audio.scm:3098 +#: gnu/packages/audio.scm:3195 msgid "Tool to adjust loudness of media files" msgstr "Værktøj til at justere lydstyrken for mediefiler" -#: gnu/packages/audio.scm:3100 +#: gnu/packages/audio.scm:3197 msgid "" "BS1770GAIN is a loudness scanner compliant with ITU-R BS.1770 and its\n" "flavors EBU R128, ATSC A/85, and ReplayGain 2.0. It helps normalizing the\n" "loudness of audio and video files to the same level." msgstr "" -#: gnu/packages/audio.scm:3131 +#: gnu/packages/audio.scm:3228 msgid "Lightweight audio filtering library" msgstr "" -#: gnu/packages/audio.scm:3132 +#: gnu/packages/audio.scm:3229 msgid "" "An easy to use audio filtering library made from webrtc\n" "code, used in @code{libtoxcore}." msgstr "" -#: gnu/packages/audio.scm:3176 +#: gnu/packages/audio.scm:3273 msgid "GSM 06.10 lossy speech compression library" msgstr "GSM 06.10-talekomprimeringsbibliotek uden kvalitetestab" -#: gnu/packages/audio.scm:3177 +#: gnu/packages/audio.scm:3274 msgid "" "This C library provides an encoder and a decoder for the GSM\n" "06.10 RPE-LTP lossy speech compression algorithm." msgstr "" -#: gnu/packages/audio.scm:3198 +#: gnu/packages/audio.scm:3295 msgid "ALSA wrappers for Python" msgstr "ALSA-omslag for Python" -#: gnu/packages/audio.scm:3200 +#: gnu/packages/audio.scm:3297 msgid "" "This package contains wrappers for accessing the ALSA API from Python.\n" "It is currently fairly complete for PCM devices, and has some support for\n" "mixers." msgstr "" -#: gnu/packages/audio.scm:3244 +#: gnu/packages/audio.scm:3335 msgid "Bluetooth ALSA backend" msgstr "" -#: gnu/packages/audio.scm:3245 +#: gnu/packages/audio.scm:3336 msgid "" "This project is a rebirth of a direct integration between\n" "Bluez and ALSA. Since Bluez >= 5, the build-in integration has been removed\n" @@ -966,22 +988,22 @@ msgid "" "on the ALSA software PCM plugin." msgstr "" -#: gnu/packages/audio.scm:3307 +#: gnu/packages/audio.scm:3398 msgid "Sound editor" msgstr "Lydredigeringsprogram" -#: gnu/packages/audio.scm:3310 +#: gnu/packages/audio.scm:3401 msgid "" "Snd is a sound editor modelled loosely after Emacs. It can be\n" "customized and extended using either the s7 Scheme implementation (included in\n" "the Snd sources), Ruby, or Forth." msgstr "" -#: gnu/packages/audio.scm:3343 +#: gnu/packages/audio.scm:3434 msgid "LV2 plugin for broadband noise reduction" msgstr "" -#: gnu/packages/audio.scm:3344 +#: gnu/packages/audio.scm:3435 msgid "" "Noise Repellent is an LV2 plugin to reduce noise. It has\n" "the following features:\n" @@ -1001,40 +1023,66 @@ msgid "" "@end enumerate\n" msgstr "" -#: gnu/packages/audio.scm:3412 +#: gnu/packages/audio.scm:3504 msgid "Command-line audio visualizer" msgstr "" -#: gnu/packages/audio.scm:3413 +#: gnu/packages/audio.scm:3505 msgid "" "@code{cli-visualizer} displays fast-Fourier\n" "transforms (FFTs) of the sound being played, as well as other graphical\n" "representations." msgstr "" -#: gnu/packages/audio.scm:3464 +#: gnu/packages/audio.scm:3556 msgid "Console audio visualizer for ALSA, MPD, and PulseAudio" msgstr "" -#: gnu/packages/audio.scm:3465 +#: gnu/packages/audio.scm:3557 msgid "" "C.A.V.A. is a bar audio spectrum visualizer for the terminal\n" "using ALSA, MPD, PulseAudio, or a FIFO buffer as its input." msgstr "" -#: gnu/packages/audio.scm:3497 +#: gnu/packages/audio.scm:3590 msgid "Pro-quality GM soundfont" msgstr "" -#: gnu/packages/audio.scm:3498 +#: gnu/packages/audio.scm:3591 msgid "Fluid-3 is Frank Wen's pro-quality GM soundfont." msgstr "" -#: gnu/packages/backup.scm:115 +#: gnu/packages/audio.scm:3617 +msgid "Fraunhofer FDK AAC library" +msgstr "" + +#: gnu/packages/audio.scm:3618 +msgid "" +"FDK is a library for encoding and decoding Advanced Audio\n" +"Coding (AAC) format audio, developed by Fraunhofer IIS, and included as part of\n" +"Android. It supports several Audio Object Types including MPEG-2 and MPEG-4 AAC\n" +"LC, HE-AAC (AAC LC + SBR), HE-AACv2 (LC + SBR + PS) as well AAC-LD (low delay)\n" +"and AAC-ELD (enhanced low delay) for real-time communication. The encoding\n" +"library supports sample rates up to 96 kHz and up to eight channels (7.1\n" +"surround)." +msgstr "" + +#: gnu/packages/audio.scm:3657 +msgid "Audio editing and playback for OpenShot" +msgstr "" + +#: gnu/packages/audio.scm:3658 +msgid "" +"OpenShot Audio Library (libopenshot-audio) allows\n" +"high-quality editing and playback of audio, and is based on the JUCE\n" +"library." +msgstr "" + +#: gnu/packages/backup.scm:122 msgid "Encrypted backup using rsync algorithm" msgstr "Krypteret sikkerhedskopiering via brug af rsync-algoritmen" -#: gnu/packages/backup.scm:117 +#: gnu/packages/backup.scm:124 msgid "" "Duplicity backs up directories by producing encrypted tar-format volumes\n" "and uploading them to a remote or local file server. Because duplicity uses\n" @@ -1051,11 +1099,11 @@ msgstr "" "underskrive disse arkiver, så vil de være sikret mod spionage og/eller\n" "ændring af serveren." -#: gnu/packages/backup.scm:146 +#: gnu/packages/backup.scm:149 msgid "File verification and repair tools" msgstr "" -#: gnu/packages/backup.scm:147 +#: gnu/packages/backup.scm:150 msgid "" "Par2cmdline uses Reed-Solomon error-correcting codes to\n" "generate and verify PAR2 recovery files. These files can be distributed\n" @@ -1067,11 +1115,11 @@ msgid "" "can even repair them." msgstr "" -#: gnu/packages/backup.scm:183 +#: gnu/packages/backup.scm:186 msgid "Simple incremental backup tool" msgstr "Simpelt værktøj til trinvis sikkerhedskopiering" -#: gnu/packages/backup.scm:185 +#: gnu/packages/backup.scm:188 msgid "" "Hdup2 is a backup utility, its aim is to make backup really simple. The\n" "backup scheduling is done by means of a cron job. It supports an\n" @@ -1084,11 +1132,11 @@ msgstr "" "sikkerhedskopier, krypterede sikkerhedskopier og opdelte sikkerhedskopier\n" "(kaldt klumper) så der nemt kan brændes til cd/dvd." -#: gnu/packages/backup.scm:239 +#: gnu/packages/backup.scm:262 msgid "Multi-format archive and compression library" msgstr "Arkiv- og komprimeringsbibliotek for flere formater" -#: gnu/packages/backup.scm:241 +#: gnu/packages/backup.scm:264 msgid "" "Libarchive provides a flexible interface for reading and writing\n" "archives in various formats such as tar and cpio. Libarchive also supports\n" @@ -1106,11 +1154,11 @@ msgstr "" "Bemærk venligst at der i øjeblikket ikke er indbygget understøttelse\n" "for vilkårlig vilkårlig adgang eller for direkte modifikation i arkivet." -#: gnu/packages/backup.scm:302 +#: gnu/packages/backup.scm:322 msgid "Provide a list of files to backup" msgstr "Tilbyder en liste af filer til sikkerhedskopiering" -#: gnu/packages/backup.scm:304 +#: gnu/packages/backup.scm:324 msgid "" "Rdup is a utility inspired by rsync and the plan9 way of doing backups.\n" "Rdup itself does not backup anything, it only print a list of absolute\n" @@ -1123,11 +1171,11 @@ msgstr "" "skripter er krævet til for det videre arbejde med denne liste og\n" "implementering af sikkerhedskopistrategien." -#: gnu/packages/backup.scm:334 +#: gnu/packages/backup.scm:354 msgid "Tar-compatible archiver" msgstr "Tar-kompatibelt arkivprogram" -#: gnu/packages/backup.scm:336 +#: gnu/packages/backup.scm:356 msgid "" "Btar is a tar-compatible archiver which allows arbitrary compression and\n" "ciphering, redundancy, differential backup, indexed extraction, multicore\n" @@ -1139,11 +1187,11 @@ msgstr "" "indekseret udtrækning, komprimering med flere kerner, inddata- og uddata-\n" "serialisering, og tolerance for delvise arkivfejl." -#: gnu/packages/backup.scm:362 +#: gnu/packages/backup.scm:382 msgid "Local/remote mirroring+incremental backup" msgstr "Lokal/ekstern spejlning+trinvis sikkerhedskopiering" -#: gnu/packages/backup.scm:364 +#: gnu/packages/backup.scm:384 msgid "" "Rdiff-backup backs up one directory to another, possibly over a network.\n" "The target directory ends up a copy of the source directory, but extra reverse\n" @@ -1171,11 +1219,11 @@ msgstr "" "placering og kun forskellene vil blive overført. Endelig er rdiff-backup\n" "nem at bruge og startopsætningen er lavet med fornuftige standarder." -#: gnu/packages/backup.scm:406 +#: gnu/packages/backup.scm:426 msgid "Deduplicating snapshot backup utility based on rsync" msgstr "" -#: gnu/packages/backup.scm:407 +#: gnu/packages/backup.scm:427 msgid "" "rsnapshot is a file system snapshot utility based on rsync.\n" "rsnapshot makes it easy to make periodic snapshots of local machines, and\n" @@ -1183,11 +1231,11 @@ msgid "" "rsnapshot uses hard links to deduplicate identical files." msgstr "" -#: gnu/packages/backup.scm:442 +#: gnu/packages/backup.scm:480 msgid "Tools & library for data backup and distributed storage" msgstr "" -#: gnu/packages/backup.scm:444 +#: gnu/packages/backup.scm:482 msgid "" "Libchop is a set of utilities and library for data backup and\n" "distributed storage. Its main application is @command{chop-backup}, an\n" @@ -1198,11 +1246,11 @@ msgid "" "detection, and lossless compression." msgstr "" -#: gnu/packages/backup.scm:566 +#: gnu/packages/backup.scm:606 msgid "Deduplicated, encrypted, authenticated and compressed backups" msgstr "" -#: gnu/packages/backup.scm:567 +#: gnu/packages/backup.scm:607 msgid "" "Borg is a deduplicating backup program. Optionally, it\n" "supports compression and authenticated encryption. The main goal of Borg is to\n" @@ -1212,11 +1260,11 @@ msgid "" "to not fully trusted targets. Borg is a fork of Attic." msgstr "" -#: gnu/packages/backup.scm:613 +#: gnu/packages/backup.scm:653 msgid "Deduplicating backup program" msgstr "" -#: gnu/packages/backup.scm:614 +#: gnu/packages/backup.scm:654 msgid "" "Attic is a deduplicating backup program. The main goal of\n" "Attic is to provide an efficient and secure way to backup data. The data\n" @@ -1224,11 +1272,11 @@ msgid "" "changes are stored." msgstr "" -#: gnu/packages/backup.scm:644 +#: gnu/packages/backup.scm:684 msgid "WIM file manipulation library and utilities" msgstr "" -#: gnu/packages/backup.scm:645 +#: gnu/packages/backup.scm:685 msgid "" "wimlib is a C library and set of command-line utilities for\n" "creating, modifying, extracting, and mounting archives in the Windows Imaging\n" @@ -1236,35 +1284,73 @@ msgid "" "NTFS volumes using @code{ntfs-3g}, preserving NTFS-specific attributes." msgstr "" -#: gnu/packages/backup.scm:702 -msgid "Easy and secure backup program" +#: gnu/packages/backup.scm:742 +msgid "Retired backup program" msgstr "" -#: gnu/packages/backup.scm:703 +#: gnu/packages/backup.scm:744 msgid "" -"Obnam is an easy, secure backup program. Features\n" -"include snapshot backups, data de-duplication and encrypted backups\n" -"using GnuPG. Backups can be stored on local hard disks, or online via\n" -"the SSH SFTP protocol. The backup server, if used, does not require\n" -"any special software, on top of SSH." +"Warning: @uref{https://blog.liw.fi/posts/2017/08/13/retiring_obnam/,\n" +"the Obnam project is retired}. You should use another backup solution instead.\n" +"\n" +"Obnam was an easy, secure backup program. Features included snapshot backups,\n" +"data de-duplication and encrypted backups using GnuPG. Backups can be stored on\n" +"local hard disks, or online via the SSH SFTP protocol. The backup server, if\n" +"used, does not require any special software, on top of SSH." msgstr "" -#: gnu/packages/backup.scm:809 +#: gnu/packages/backup.scm:852 msgid "Fast, disk based, rotating network backup system" msgstr "" -#: gnu/packages/backup.scm:811 +#: gnu/packages/backup.scm:854 msgid "" "With dirvish you can maintain a set of complete images of your\n" "file systems with unattended creation and expiration. A dirvish backup vault\n" "is like a time machine for your data. " msgstr "" -#: gnu/packages/base.scm:77 +#: gnu/packages/backup.scm:952 +msgid "Backup program with multiple revisions, encryption and more" +msgstr "" + +#: gnu/packages/backup.scm:953 +msgid "" +"Restic is a program that does backups right and was designed\n" +"with the following principles in mind:\n" +"\n" +"@itemize\n" +"@item Easy: Doing backups should be a frictionless process, otherwise you\n" +"might be tempted to skip it. Restic should be easy to configure and use, so\n" +"that, in the event of a data loss, you can just restore it. Likewise,\n" +"restoring data should not be complicated.\n" +"\n" +"@item Fast: Backing up your data with restic should only be limited by your\n" +"network or hard disk bandwidth so that you can backup your files every day.\n" +"Nobody does backups if it takes too much time. Restoring backups should only\n" +"transfer data that is needed for the files that are to be restored, so that\n" +"this process is also fast.\n" +"\n" +"@item Verifiable: Much more important than backup is restore, so restic\n" +"enables you to easily verify that all data can be restored. @item Secure:\n" +"Restic uses cryptography to guarantee confidentiality and integrity of your\n" +"data. The location the backup data is stored is assumed not to be a trusted\n" +"environment (e.g. a shared space where others like system administrators are\n" +"able to access your backups). Restic is built to secure your data against\n" +"such attackers.\n" +"\n" +"@item Efficient: With the growth of data, additional snapshots should only\n" +"take the storage of the actual increment. Even more, duplicate data should be\n" +"de-duplicated before it is actually written to the storage back end to save\n" +"precious backup space.\n" +"@end itemize" +msgstr "" + +#: gnu/packages/base.scm:79 msgid "Hello, GNU world: An example GNU package" msgstr "Hej, GNU-verden: Et eksempel på en GNU-pakke" -#: gnu/packages/base.scm:79 +#: gnu/packages/base.scm:81 msgid "" "GNU Hello prints the message \"Hello, world!\" and then exits. It\n" "serves as an example of standard GNU coding practices. As such, it supports\n" @@ -1275,11 +1361,11 @@ msgstr "" "sådan understøtter programmer parametre på kommandolinjen, flere\n" "sprog og så videre." -#: gnu/packages/base.scm:114 +#: gnu/packages/base.scm:116 msgid "Print lines matching a pattern" msgstr "Udskriv linjer der matcher et mønster" -#: gnu/packages/base.scm:116 +#: gnu/packages/base.scm:118 msgid "" "grep is a tool for finding text inside files. Text is found by\n" "matching a pattern provided by the user in one or many files. The pattern\n" @@ -1298,11 +1384,11 @@ msgstr "" "grep tilbyder mange udvidelser i forhold til standardredskabet,\n" "inklusiv rekursiv mappesøgning." -#: gnu/packages/base.scm:138 +#: gnu/packages/base.scm:140 msgid "Stream editor" msgstr "Strømredigeringsprogram" -#: gnu/packages/base.scm:160 +#: gnu/packages/base.scm:156 msgid "" "Sed is a non-interactive, text stream editor. It receives a text\n" "input from a file or from standard input and it then applies a series of text\n" @@ -1316,11 +1402,11 @@ msgstr "" "tekstmønster i en strøm. GNU-implementeringen tilbyder flere\n" "udvidelser i forhold til standardredskabet." -#: gnu/packages/base.scm:200 +#: gnu/packages/base.scm:216 msgid "Managing tar archives" msgstr "Håndtering af tar-arkiver" -#: gnu/packages/base.scm:202 +#: gnu/packages/base.scm:218 msgid "" "Tar provides the ability to create tar archives, as well as the\n" "ability to extract, update or list files in an existing archive. It is\n" @@ -1335,11 +1421,11 @@ msgstr "" "mappestruktur og filinformation såsom rettigheder og oprettelse/ændrings-\n" "datoer bevares. GNU tar tilbyder mange udvidelser over standardredskabet." -#: gnu/packages/base.scm:225 +#: gnu/packages/base.scm:247 msgid "Apply differences to originals, with optional backups" msgstr "Anvend forskelle på originaler, med valgfri sikkerhedskopiering" -#: gnu/packages/base.scm:227 +#: gnu/packages/base.scm:249 msgid "" "Patch is a program that applies changes to files based on differences\n" "laid out as by the program \"diff\". The changes may be applied to one or more\n" @@ -1353,11 +1439,11 @@ msgstr "" "forskellige diff-formater. Det kan også bruges til at tilbageføre\n" "tidligere anvendte forskelle." -#: gnu/packages/base.scm:248 +#: gnu/packages/base.scm:270 msgid "Comparing and merging files" msgstr "Sammenligning og sammenføjning af filer" -#: gnu/packages/base.scm:250 +#: gnu/packages/base.scm:272 msgid "" "GNU Diffutils is a package containing tools for finding the\n" "differences between files. The \"diff\" command is used to show how two files\n" @@ -1371,11 +1457,11 @@ msgstr "" "de er forskellige. »diff3« giver dig mulighed for at sammenligne tre filer.\n" "Endelig tilbyder »sdiff« en interaktiv måde at sammenføje to filer." -#: gnu/packages/base.scm:293 +#: gnu/packages/base.scm:315 msgid "Operating on files matching given criteria" msgstr "Operation på filer der matcher angivne kriterier" -#: gnu/packages/base.scm:295 +#: gnu/packages/base.scm:317 msgid "" "Findutils supplies the basic file directory searching utilities of the\n" "GNU system. It consists of two primary searching utilities: \"find\"\n" @@ -1391,11 +1477,11 @@ msgstr "" "ekstra værktøjer er inkluderet: »updatedb« opdaterer filnavnsdatabasen\n" "og »xargs« kan bruges til at anvende kommandoer med arbitrært lange argumenter." -#: gnu/packages/base.scm:353 +#: gnu/packages/base.scm:375 msgid "Core GNU utilities (file, text, shell)" msgstr "Core GNU-redskaber (file, text, shell)" -#: gnu/packages/base.scm:355 +#: gnu/packages/base.scm:377 msgid "" "GNU Coreutils includes all of the basic command-line tools that are\n" "expected in a POSIX system. These provide the basic file, shell and text\n" @@ -1408,11 +1494,11 @@ msgstr "" "af disse værktøjer tilbyder udvidet funktionalitet udover det skitseret\n" "i POSIX-standarden." -#: gnu/packages/base.scm:397 +#: gnu/packages/base.scm:424 msgid "Remake files automatically" msgstr "Gendan filer automatisk" -#: gnu/packages/base.scm:399 +#: gnu/packages/base.scm:426 msgid "" "Make is a program that is used to control the production of\n" "executables or other files from their source files. The process is\n" @@ -1429,11 +1515,11 @@ msgstr "" "gendannes efter at deres kilder har ændret sig. GNU make tilbyder\n" "mange funktionsrige udvidelser der ligger udover standardredskabet." -#: gnu/packages/base.scm:440 +#: gnu/packages/base.scm:472 msgid "Binary utilities: bfd gas gprof ld" msgstr "Binære redskaber: bfd gas gprof ld" -#: gnu/packages/base.scm:442 +#: gnu/packages/base.scm:474 msgid "" "GNU Binutils is a collection of tools for working with binary files.\n" "Perhaps the most notable are \"ld\", a linker, and \"as\", an assembler.\n" @@ -1443,22 +1529,22 @@ msgid "" "included." msgstr "" -#: gnu/packages/base.scm:516 +#: gnu/packages/base.scm:560 msgid "The linker wrapper" msgstr "" -#: gnu/packages/base.scm:518 +#: gnu/packages/base.scm:562 msgid "" "The linker wrapper (or 'ld-wrapper') wraps the linker to add any\n" "missing '-rpath' flags, and to detect any misuse of libraries outside of the\n" "store." msgstr "" -#: gnu/packages/base.scm:746 +#: gnu/packages/base.scm:782 msgid "The GNU C Library" msgstr "" -#: gnu/packages/base.scm:748 +#: gnu/packages/base.scm:784 msgid "" "Any Unix-like operating system needs a C library: the library which\n" "defines the \"system calls\" and other basic facilities such as open, malloc,\n" @@ -1468,47 +1554,47 @@ msgid "" "with the Linux kernel." msgstr "" -#: gnu/packages/base.scm:826 +#: gnu/packages/base.scm:861 msgid "The GNU C Library (GNU Hurd variant)" msgstr "GNU C-biblioteket (GNU Hurd-variant)" -#: gnu/packages/base.scm:953 +#: gnu/packages/base.scm:1015 msgid "All the locales supported by the GNU C Library" msgstr "" -#: gnu/packages/base.scm:955 +#: gnu/packages/base.scm:1017 msgid "" "This package provides all the locales supported by the GNU C Library,\n" "more than 400 in total. To use them set the 'LOCPATH' environment variable to\n" "the 'share/locale' sub-directory of this package." msgstr "" -#: gnu/packages/base.scm:1025 +#: gnu/packages/base.scm:1086 msgid "Small sample of UTF-8 locales" msgstr "" -#: gnu/packages/base.scm:1027 +#: gnu/packages/base.scm:1088 msgid "" "This package provides a small sample of UTF-8 locales mostly useful in\n" "test environments." msgstr "" -#: gnu/packages/base.scm:1045 +#: gnu/packages/base.scm:1106 msgid "Find full path of shell commands" msgstr "" -#: gnu/packages/base.scm:1047 +#: gnu/packages/base.scm:1108 msgid "" "The which program finds the location of executables in PATH, with a\n" "variety of options. It is an alternative to the shell \"type\" built-in\n" "command." msgstr "" -#: gnu/packages/base.scm:1153 +#: gnu/packages/base.scm:1211 msgid "Database of current and historical time zones" msgstr "" -#: gnu/packages/base.scm:1154 +#: gnu/packages/base.scm:1212 msgid "" "The Time Zone Database (often called tz or zoneinfo)\n" "contains code and data that represent the history of local time for many\n" @@ -1517,22 +1603,22 @@ msgid "" "and daylight-saving rules." msgstr "" -#: gnu/packages/base.scm:1244 +#: gnu/packages/base.scm:1266 msgid "Character set conversion library" msgstr "Bibliotek til konvertering af tegnsæt" -#: gnu/packages/base.scm:1246 +#: gnu/packages/base.scm:1268 msgid "" "libiconv provides an implementation of the iconv function for systems\n" "that lack it. iconv is used to convert between character encodings in a\n" "program. It supports a wide variety of different encodings." msgstr "" -#: gnu/packages/bittorrent.scm:110 +#: gnu/packages/bittorrent.scm:113 msgid "Fast and easy BitTorrent client" msgstr "" -#: gnu/packages/bittorrent.scm:112 +#: gnu/packages/bittorrent.scm:115 msgid "" "Transmission is a BitTorrent client that comes with graphical,\n" "textual, and Web user interfaces. Transmission also has a daemon for\n" @@ -1540,72 +1626,72 @@ msgid "" "DHT, µTP, PEX and Magnet Links." msgstr "" -#: gnu/packages/bittorrent.scm:144 +#: gnu/packages/bittorrent.scm:147 msgid "BitTorrent library of rtorrent" msgstr "BitTorrent-bibliotek for rtorrent" -#: gnu/packages/bittorrent.scm:146 +#: gnu/packages/bittorrent.scm:149 msgid "" "LibTorrent is a BitTorrent library used by and developed in parallel\n" "with the BitTorrent client rtorrent. It is written in C++ with emphasis on\n" "speed and efficiency." msgstr "" -#: gnu/packages/bittorrent.scm:173 +#: gnu/packages/bittorrent.scm:176 msgid "BitTorrent client with ncurses interface" msgstr "" -#: gnu/packages/bittorrent.scm:175 +#: gnu/packages/bittorrent.scm:178 msgid "" "rTorrent is a BitTorrent client with an ncurses interface. It supports\n" "full encryption, DHT, PEX, and Magnet Links. It can also be controlled via\n" "XML-RPC over SCGI." msgstr "" -#: gnu/packages/bittorrent.scm:208 gnu/packages/bittorrent.scm:249 +#: gnu/packages/bittorrent.scm:209 gnu/packages/bittorrent.scm:250 msgid "Console client for the Transmission BitTorrent daemon" msgstr "" -#: gnu/packages/bittorrent.scm:209 +#: gnu/packages/bittorrent.scm:210 msgid "" "Tremc is a console client, with a curses interface, for the\n" "Transmission BitTorrent daemon." msgstr "" -#: gnu/packages/bittorrent.scm:250 +#: gnu/packages/bittorrent.scm:251 msgid "" "Transmission-remote-cli is a console client, with a curses\n" "interface, for the Transmission BitTorrent daemon. This package is no longer\n" "maintained upstream." msgstr "" -#: gnu/packages/bittorrent.scm:298 +#: gnu/packages/bittorrent.scm:299 msgid "Utility for parallel downloading files" msgstr "Redskab for parallel overførsel af filer" -#: gnu/packages/bittorrent.scm:300 +#: gnu/packages/bittorrent.scm:301 msgid "" "Aria2 is a lightweight, multi-protocol & multi-source command-line\n" "download utility. It supports HTTP/HTTPS, FTP, SFTP, BitTorrent and Metalink.\n" "Aria2 can be manipulated via built-in JSON-RPC and XML-RPC interfaces." msgstr "" -#: gnu/packages/bittorrent.scm:331 +#: gnu/packages/bittorrent.scm:332 msgid "Universal download manager with GTK+ interface" msgstr "" -#: gnu/packages/bittorrent.scm:333 +#: gnu/packages/bittorrent.scm:334 msgid "" "uGet is portable download manager with GTK+ interface supporting\n" "HTTP, HTTPS, BitTorrent and Metalink, supporting multi-connection\n" "downloads, download scheduling, download rate limiting." msgstr "" -#: gnu/packages/bittorrent.scm:362 +#: gnu/packages/bittorrent.scm:363 msgid "Utility to create BitTorrent metainfo files" msgstr "Redskab til at oprette BitTorrent-metainfofiler" -#: gnu/packages/bittorrent.scm:364 +#: gnu/packages/bittorrent.scm:365 msgid "" "mktorrent is a simple command-line utility to create BitTorrent\n" "@dfn{metainfo} files, often known simply as @dfn{torrents}, from both single\n" @@ -1615,22 +1701,22 @@ msgid "" "and will take advantage of multiple processor cores where possible." msgstr "" -#: gnu/packages/bittorrent.scm:404 +#: gnu/packages/bittorrent.scm:416 msgid "Feature complete BitTorrent implementation" msgstr "" -#: gnu/packages/bittorrent.scm:406 +#: gnu/packages/bittorrent.scm:418 msgid "" "libtorrent-rasterbar is a feature complete C++ BitTorrent implementation\n" "focusing on efficiency and scalability. It runs on embedded devices as well as\n" "desktops." msgstr "" -#: gnu/packages/bittorrent.scm:444 +#: gnu/packages/bittorrent.scm:456 msgid "Graphical BitTorrent client" msgstr "" -#: gnu/packages/bittorrent.scm:446 +#: gnu/packages/bittorrent.scm:458 msgid "" "qBittorrent is a BitTorrent client programmed in C++/Qt that uses\n" "libtorrent (sometimes called libtorrent-rasterbar) by Arvid Norberg.\n" @@ -1640,22 +1726,36 @@ msgid "" "features." msgstr "" -#: gnu/packages/certs.scm:67 +#: gnu/packages/bittorrent.scm:493 +msgid "Fully-featured cross-platform ​BitTorrent client" +msgstr "" + +#: gnu/packages/bittorrent.scm:495 +msgid "" +"Deluge contains the common features to BitTorrent clients such as\n" +"Protocol Encryption, DHT, Local Peer Discovery (LSD), Peer Exchange\n" +"(PEX), UPnP, NAT-PMP, Proxy support, Web seeds, global and per-torrent\n" +"speed limits. Deluge heavily utilises the ​libtorrent library. It is\n" +"designed to run as both a normal standalone desktop application and as a\n" +"​client-server." +msgstr "" + +#: gnu/packages/certs.scm:68 msgid "Python script to extract .pem data from certificate collection" msgstr "" -#: gnu/packages/certs.scm:69 +#: gnu/packages/certs.scm:70 msgid "" "certdata2pem.py is a Python script to transform X.509 certificate\n" "\"source code\" as contained, for example, in the Mozilla sources, into\n" ".pem formatted certificates." msgstr "" -#: gnu/packages/certs.scm:139 +#: gnu/packages/certs.scm:140 msgid "CA certificates from Mozilla" msgstr "" -#: gnu/packages/certs.scm:141 +#: gnu/packages/certs.scm:142 msgid "" "This package provides certificates for Certification Authorities (CA)\n" "taken from the NSS package and thus ultimately from the Mozilla project." @@ -1689,11 +1789,11 @@ msgid "" "in compression." msgstr "" -#: gnu/packages/compression.scm:137 +#: gnu/packages/compression.scm:134 msgid "Zip Compression library" msgstr "Zip-komprimeringsbibliotek" -#: gnu/packages/compression.scm:139 +#: gnu/packages/compression.scm:136 msgid "" "Minizip is a minimalistic library that supports compressing,\n" "extracting and viewing ZIP archives. This version is extracted from\n" @@ -1703,31 +1803,31 @@ msgstr "" "udtrækning og visning af ZIP-arkiver. Denne version er udtrækket fra\n" "kilden @code{zlib}." -#: gnu/packages/compression.scm:158 +#: gnu/packages/compression.scm:155 msgid "Replacement for Sun's 'jar' utility" msgstr "Erstatning for Suns redskab »jar«" -#: gnu/packages/compression.scm:160 +#: gnu/packages/compression.scm:157 msgid "" "FastJar is an attempt to create a much faster replacement for Sun's 'jar'\n" "utility. Instead of being written in Java, FastJar is written in C." msgstr "" -#: gnu/packages/compression.scm:194 +#: gnu/packages/compression.scm:186 msgid "C library for manipulating POSIX tar files" msgstr "C-bibliotek til at manipulere POSIX-tar-filer" -#: gnu/packages/compression.scm:196 +#: gnu/packages/compression.scm:188 msgid "" "libtar is a C library for manipulating POSIX tar files. It handles\n" "adding and extracting files to/from a tar archive." msgstr "" -#: gnu/packages/compression.scm:213 +#: gnu/packages/compression.scm:205 msgid "General file (de)compression (using lzw)" msgstr "" -#: gnu/packages/compression.scm:227 +#: gnu/packages/compression.scm:219 msgid "" "GNU Gzip provides data compression and decompression utilities; the\n" "typical extension is \".gz\". Unlike the \"zip\" format, it compresses a single\n" @@ -1735,11 +1835,11 @@ msgid "" "\".tar.gz\" or \".tgz\", etc." msgstr "" -#: gnu/packages/compression.scm:297 +#: gnu/packages/compression.scm:304 msgid "High-quality data compression program" msgstr "" -#: gnu/packages/compression.scm:299 +#: gnu/packages/compression.scm:306 msgid "" "bzip2 is a freely available, patent free (see below), high-quality data\n" "compressor. It typically compresses files to within 10% to 15% of the best\n" @@ -1748,11 +1848,11 @@ msgid "" "decompression." msgstr "" -#: gnu/packages/compression.scm:320 +#: gnu/packages/compression.scm:327 msgid "Parallel bzip2 compression utility" msgstr "" -#: gnu/packages/compression.scm:322 +#: gnu/packages/compression.scm:329 msgid "" "lbzip2 is a multi-threaded compression utility with support for the\n" "bzip2 compressed file format. lbzip2 can process standard bz2 files in\n" @@ -1762,11 +1862,11 @@ msgid "" "compatible with bzip2 – both at file format and command line level." msgstr "" -#: gnu/packages/compression.scm:352 +#: gnu/packages/compression.scm:359 msgid "Parallel bzip2 implementation" msgstr "" -#: gnu/packages/compression.scm:354 +#: gnu/packages/compression.scm:361 msgid "" "Pbzip2 is a parallel implementation of the bzip2 block-sorting file\n" "compressor that uses pthreads and achieves near-linear speedup on SMP machines.\n" @@ -1774,11 +1874,11 @@ msgid "" "compressed with pbzip2 can be decompressed with bzip2)." msgstr "" -#: gnu/packages/compression.scm:375 +#: gnu/packages/compression.scm:382 msgid "General-purpose data compression" msgstr "" -#: gnu/packages/compression.scm:377 +#: gnu/packages/compression.scm:384 msgid "" "XZ Utils is free general-purpose data compression software with high\n" "compression ratio. XZ Utils were written for POSIX-like systems, but also\n" @@ -1791,11 +1891,11 @@ msgid "" "than gzip and 15 % smaller output than bzip2." msgstr "" -#: gnu/packages/compression.scm:405 +#: gnu/packages/compression.scm:412 msgid "Data compression library suitable for real-time data de-/compression" msgstr "" -#: gnu/packages/compression.scm:407 +#: gnu/packages/compression.scm:414 msgid "" "LZO is a data compression library which is suitable for data\n" "de-/compression in real-time. This means it favours speed over\n" @@ -1805,22 +1905,22 @@ msgid "" "format are designed to be portable across platforms." msgstr "" -#: gnu/packages/compression.scm:443 +#: gnu/packages/compression.scm:450 msgid "Python bindings for the LZO data compression library" msgstr "Pythonbindinger for LZO-datakomprimeringsbiblioteket" -#: gnu/packages/compression.scm:445 +#: gnu/packages/compression.scm:452 msgid "" "Python-LZO provides Python bindings for LZO, i.e. you can access\n" "the LZO library from your Python scripts thereby compressing ordinary\n" "Python strings." msgstr "" -#: gnu/packages/compression.scm:468 +#: gnu/packages/compression.scm:475 msgid "Compress or expand files" msgstr "Komprimer eller udvid filer" -#: gnu/packages/compression.scm:470 +#: gnu/packages/compression.scm:477 msgid "" "Lzop is a file compressor which is very similar to gzip. Lzop uses the\n" "LZO data compression library for compression services, and its main advantages\n" @@ -1828,11 +1928,11 @@ msgid "" "some compression ratio)." msgstr "" -#: gnu/packages/compression.scm:489 +#: gnu/packages/compression.scm:496 msgid "Lossless data compressor based on the LZMA algorithm" msgstr "" -#: gnu/packages/compression.scm:491 +#: gnu/packages/compression.scm:498 msgid "" "Lzip is a lossless data compressor with a user interface similar to the\n" "one of gzip or bzip2. Lzip decompresses almost as fast as gzip and compresses\n" @@ -1840,11 +1940,11 @@ msgid "" "archiving. Lzip is a clean implementation of the LZMA algorithm." msgstr "" -#: gnu/packages/compression.scm:510 +#: gnu/packages/compression.scm:517 msgid "Recover and decompress data from damaged lzip files" msgstr "" -#: gnu/packages/compression.scm:512 +#: gnu/packages/compression.scm:519 msgid "" "Lziprecover is a data recovery tool and decompressor for files in the lzip\n" "compressed data format (.lz). It can test the integrity of lzip files, extract\n" @@ -1860,11 +1960,11 @@ msgid "" "decompressors when faced with corrupted input." msgstr "" -#: gnu/packages/compression.scm:554 +#: gnu/packages/compression.scm:561 msgid "Archives in shell scripts, uuencode/uudecode" msgstr "" -#: gnu/packages/compression.scm:556 +#: gnu/packages/compression.scm:563 msgid "" "GNU sharutils is a package for creating and manipulating shell\n" "archives that can be readily emailed. A shell archive is a file that can be\n" @@ -1872,71 +1972,71 @@ msgid "" "This package is mostly for compatibility and historical interest." msgstr "" -#: gnu/packages/compression.scm:587 +#: gnu/packages/compression.scm:594 msgid "Library for SoundFont decompression" msgstr "" -#: gnu/packages/compression.scm:589 +#: gnu/packages/compression.scm:596 msgid "" "SfArkLib is a C++ library for decompressing SoundFont files compressed\n" "with the sfArk algorithm." msgstr "" -#: gnu/packages/compression.scm:623 +#: gnu/packages/compression.scm:631 msgid "Basic sfArk decompressor" msgstr "" -#: gnu/packages/compression.scm:624 +#: gnu/packages/compression.scm:632 msgid "" "SfArk extractor converts SoundFonts in the compressed legacy\n" "sfArk file format to the uncompressed sf2 format." msgstr "" -#: gnu/packages/compression.scm:641 +#: gnu/packages/compression.scm:650 msgid "Compression tools for some formats used by Microsoft" msgstr "" -#: gnu/packages/compression.scm:643 +#: gnu/packages/compression.scm:652 msgid "" "The purpose of libmspack is to provide both compression and\n" "decompression of some loosely related file formats used by Microsoft." msgstr "" -#: gnu/packages/compression.scm:662 +#: gnu/packages/compression.scm:671 msgid "Low-level interface to bzip2 compression library" msgstr "" -#: gnu/packages/compression.scm:663 +#: gnu/packages/compression.scm:672 msgid "" "This module provides a Perl interface to the bzip2\n" "compression library." msgstr "" -#: gnu/packages/compression.scm:697 +#: gnu/packages/compression.scm:706 msgid "Low-level interface to zlib compression library" msgstr "" -#: gnu/packages/compression.scm:698 +#: gnu/packages/compression.scm:707 msgid "" "This module provides a Perl interface to the zlib\n" "compression library." msgstr "" -#: gnu/packages/compression.scm:719 +#: gnu/packages/compression.scm:728 msgid "IO Interface to compressed files/buffers" msgstr "" -#: gnu/packages/compression.scm:720 +#: gnu/packages/compression.scm:729 msgid "" "IO-Compress provides a Perl interface to allow reading and\n" "writing of compressed data created with the zlib and bzip2 libraries." msgstr "" -#: gnu/packages/compression.scm:746 +#: gnu/packages/compression.scm:755 msgid "Compression algorithm focused on speed" msgstr "" -#: gnu/packages/compression.scm:747 +#: gnu/packages/compression.scm:756 msgid "" "LZ4 is a lossless compression algorithm, providing\n" "compression speed at 400 MB/s per core (0.16 Bytes/cycle). It also features an\n" @@ -1945,30 +2045,30 @@ msgid "" "time for compression ratio." msgstr "" -#: gnu/packages/compression.scm:772 +#: gnu/packages/compression.scm:781 msgid "LZ4 bindings for Python" msgstr "LZ4-bindinger for Python" -#: gnu/packages/compression.scm:774 +#: gnu/packages/compression.scm:783 msgid "" "This package provides python bindings for the lz4 compression library\n" "by Yann Collet. The project contains bindings for the LZ4 block format and\n" "the LZ4 frame format." msgstr "" -#: gnu/packages/compression.scm:797 +#: gnu/packages/compression.scm:806 msgid "String compression" msgstr "Strengkomprimering" -#: gnu/packages/compression.scm:798 +#: gnu/packages/compression.scm:807 msgid "Lz-string is a string compressor library for Python." msgstr "" -#: gnu/packages/compression.scm:836 +#: gnu/packages/compression.scm:845 msgid "Tools to create and extract squashfs file systems" msgstr "" -#: gnu/packages/compression.scm:838 +#: gnu/packages/compression.scm:847 msgid "" "Squashfs is a highly compressed read-only file system for Linux. It uses\n" "zlib to compress files, inodes, and directories. All blocks are packed to\n" @@ -1978,21 +2078,21 @@ msgid "" "extract such file systems." msgstr "" -#: gnu/packages/compression.scm:875 +#: gnu/packages/compression.scm:901 msgid "Parallel implementation of gzip" msgstr "" -#: gnu/packages/compression.scm:877 +#: gnu/packages/compression.scm:903 msgid "" "This package provides a parallel implementation of gzip that exploits\n" "multiple processors and multiple cores when compressing data." msgstr "" -#: gnu/packages/compression.scm:901 +#: gnu/packages/compression.scm:927 msgid "Parallel indexing implementation of LZMA" msgstr "" -#: gnu/packages/compression.scm:903 +#: gnu/packages/compression.scm:929 msgid "" "The existing XZ Utils provide great compression in the .xz file format,\n" "but they produce just one big block of compressed data. Pixz instead produces\n" @@ -2001,11 +2101,11 @@ msgid "" "tarballs." msgstr "" -#: gnu/packages/compression.scm:944 +#: gnu/packages/compression.scm:971 msgid "Implementation of the Brotli compression algorithm" msgstr "" -#: gnu/packages/compression.scm:946 +#: gnu/packages/compression.scm:973 msgid "" "Brotli is a general-purpose lossless compression algorithm. It is\n" "similar in speed to deflate but offers denser compression. This package\n" @@ -2013,19 +2113,32 @@ msgid "" "respectively, based on the reference implementation from Google." msgstr "" -#: gnu/packages/compression.scm:970 +#: gnu/packages/compression.scm:1007 +msgid "Patch binary files" +msgstr "" + +#: gnu/packages/compression.scm:1009 +msgid "" +"@command{bsdiff} and @command{bspatch} are tools for building and\n" +"applying patches to binary files. By using suffix sorting (specifically\n" +"Larsson and Sadakane's @code{qsufsort}) and taking advantage of how\n" +"executable files change, bsdiff routinely produces binary patches 50-80%\n" +"smaller than those produced by @code{Xdelta}." +msgstr "" + +#: gnu/packages/compression.scm:1055 msgid "Tool to unpack Cabinet archives" msgstr "" -#: gnu/packages/compression.scm:971 +#: gnu/packages/compression.scm:1056 msgid "Extracts files out of Microsoft Cabinet (.cab) archives" msgstr "" -#: gnu/packages/compression.scm:1003 +#: gnu/packages/compression.scm:1089 msgid "Delta encoder for binary files" msgstr "" -#: gnu/packages/compression.scm:1004 +#: gnu/packages/compression.scm:1090 msgid "" "xdelta encodes only the differences between two binary files\n" "using the VCDIFF algorithm and patch file format described in RFC 3284. It can\n" @@ -2034,11 +2147,11 @@ msgid "" "human-readable output." msgstr "" -#: gnu/packages/compression.scm:1037 +#: gnu/packages/compression.scm:1123 msgid "Large file compressor with a very high compression ratio" msgstr "" -#: gnu/packages/compression.scm:1038 +#: gnu/packages/compression.scm:1124 msgid "" "lrzip is a compression utility that uses long-range\n" "redundancy reduction to improve the subsequent compression ratio of\n" @@ -2049,22 +2162,22 @@ msgid "" "well as bzip2." msgstr "" -#: gnu/packages/compression.scm:1068 +#: gnu/packages/compression.scm:1154 msgid "Filter for improving compression of typed binary data" msgstr "" -#: gnu/packages/compression.scm:1069 +#: gnu/packages/compression.scm:1155 msgid "" "Bitshuffle is an algorithm that rearranges typed, binary data\n" "for improving compression, as well as a python/C package that implements this\n" "algorithm within the Numpy framework." msgstr "" -#: gnu/packages/compression.scm:1090 +#: gnu/packages/compression.scm:1176 msgid "Fast compressor/decompressor" msgstr "" -#: gnu/packages/compression.scm:1091 +#: gnu/packages/compression.scm:1177 msgid "" "Snappy is a compression/decompression library. It does not\n" "aim for maximum compression, or compatibility with any other compression library;\n" @@ -2074,63 +2187,63 @@ msgid "" "100% bigger." msgstr "" -#: gnu/packages/compression.scm:1220 +#: gnu/packages/compression.scm:1306 msgid "Compression/decompression algorithm in Java" msgstr "" -#: gnu/packages/compression.scm:1221 +#: gnu/packages/compression.scm:1307 msgid "" -"Snappy-java is a Java port of the snappy, a fast C++\n" -"compresser/decompresser." +"Snappy-java is a Java port of snappy, a fast C++\n" +"compressor/decompressor." msgstr "" -#: gnu/packages/compression.scm:1327 +#: gnu/packages/compression.scm:1412 msgid "Java port of the Snappy (de)compressor" msgstr "" -#: gnu/packages/compression.scm:1329 +#: gnu/packages/compression.scm:1414 msgid "" "Iq80-snappy is a port of the Snappy compressor and decompressor rewritten\n" "in pure Java. This compression code produces a byte-for-byte exact copy of the\n" "output created by the original C++ code, and is extremely fast." msgstr "" -#: gnu/packages/compression.scm:1368 +#: gnu/packages/compression.scm:1453 msgid "Java bzip2 compression/decompression library" msgstr "Java bzip2-komprimerings/dekomprimeringsbibliotek" -#: gnu/packages/compression.scm:1369 +#: gnu/packages/compression.scm:1454 msgid "" "Jbzip2 is a Java bzip2 compression/decompression library.\n" "It can be used as a replacement for the Apache @code{CBZip2InputStream} /\n" "@code{CBZip2OutputStream} classes." msgstr "" -#: gnu/packages/compression.scm:1435 +#: gnu/packages/compression.scm:1520 msgid "Command-line file archiver with high compression ratio" msgstr "Filarkivprogram for kommandolinjen med høje komprimeringsforhold" -#: gnu/packages/compression.scm:1436 +#: gnu/packages/compression.scm:1521 msgid "" "p7zip is a command-line port of 7-Zip, a file archiver that\n" "handles the 7z format which features very high compression ratios." msgstr "" -#: gnu/packages/compression.scm:1475 +#: gnu/packages/compression.scm:1562 msgid "Compressed C++ iostream" msgstr "" -#: gnu/packages/compression.scm:1476 +#: gnu/packages/compression.scm:1563 msgid "" "gzstream is a small library for providing zlib\n" "functionality in a C++ iostream." msgstr "" -#: gnu/packages/compression.scm:1523 +#: gnu/packages/compression.scm:1612 msgid "Incremental journaling archiver" msgstr "" -#: gnu/packages/compression.scm:1524 +#: gnu/packages/compression.scm:1613 msgid "" "ZPAQ is a command-line archiver for realistic situations with\n" "many duplicate and already compressed files. It backs up only those files\n" @@ -2144,21 +2257,21 @@ msgid "" "or junctions, and always follows hard links." msgstr "" -#: gnu/packages/compression.scm:1606 +#: gnu/packages/compression.scm:1695 msgid "Extract CAB files from InstallShield installers" msgstr "" -#: gnu/packages/compression.scm:1608 +#: gnu/packages/compression.scm:1697 msgid "" "@command{unshield} is a tool and library for extracting @file{.cab}\n" " archives from InstallShield installers." msgstr "" -#: gnu/packages/compression.scm:1639 +#: gnu/packages/compression.scm:1727 msgid "Zstandard real-time compression algorithm" msgstr "" -#: gnu/packages/compression.scm:1640 +#: gnu/packages/compression.scm:1728 msgid "" "Zstandard (@command{zstd}) is a lossless compression algorithm\n" "that combines very fast operation with a compression ratio comparable to that of\n" @@ -2168,11 +2281,11 @@ msgid "" "speed." msgstr "" -#: gnu/packages/compression.scm:1682 +#: gnu/packages/compression.scm:1770 msgid "Threaded implementation of the Zstandard compression algorithm" msgstr "" -#: gnu/packages/compression.scm:1683 +#: gnu/packages/compression.scm:1771 msgid "" "Parallel Zstandard (PZstandard or @command{pzstd}) is a\n" "multi-threaded implementation of the @uref{http://zstd.net/, Zstandard\n" @@ -2185,11 +2298,11 @@ msgid "" "the actual decompression, the other input and output." msgstr "" -#: gnu/packages/compression.scm:1724 +#: gnu/packages/compression.scm:1809 msgid "Compression and file packing utility" msgstr "Komprimerings- og filpakningsredskab" -#: gnu/packages/compression.scm:1726 +#: gnu/packages/compression.scm:1811 msgid "" "Zip is a compression and file packaging/archive utility. Zip is useful\n" "for packaging a set of files for distribution, for archiving files, and for\n" @@ -2204,11 +2317,11 @@ msgid "" "Compression ratios of 2:1 to 3:1 are common for text files." msgstr "" -#: gnu/packages/compression.scm:1782 +#: gnu/packages/compression.scm:1873 msgid "Decompression and file extraction utility" msgstr "" -#: gnu/packages/compression.scm:1784 +#: gnu/packages/compression.scm:1875 msgid "" "UnZip is an extraction utility for archives compressed in .zip format,\n" "also called \"zipfiles\".\n" @@ -2219,29 +2332,29 @@ msgid "" "recreates the stored directory structure by default." msgstr "" -#: gnu/packages/compression.scm:1829 +#: gnu/packages/compression.scm:1906 msgid "Library for accessing zip files" msgstr "Bibliotek til at tilgå zip-filer" -#: gnu/packages/compression.scm:1831 +#: gnu/packages/compression.scm:1908 msgid "ZZipLib is a library based on zlib for accessing zip files." msgstr "ZZipLib er et bibliotek baseret på zlib for adgang til zip-filer." -#: gnu/packages/compression.scm:1853 +#: gnu/packages/compression.scm:1930 msgid "Provides an interface to Zip archive files" msgstr "Tilbyder en grænseflade til zip-arkivfiler" -#: gnu/packages/compression.scm:1854 +#: gnu/packages/compression.scm:1931 msgid "" "The @code{Archive::Zip} module allows a Perl program to\n" "create, manipulate, read, and write Zip archive files." msgstr "" -#: gnu/packages/compression.scm:1876 +#: gnu/packages/compression.scm:1953 msgid "C library for reading, creating, and modifying zip archives" msgstr "C-bibliotek til at læse, oprette og ændre zip-arkiver" -#: gnu/packages/compression.scm:1877 +#: gnu/packages/compression.scm:1954 msgid "" "Libzip is a C library for reading, creating, and modifying\n" "zip archives. Files can be added from data buffers, files, or compressed data\n" @@ -2249,11 +2362,11 @@ msgid "" "archive can be reverted." msgstr "" -#: gnu/packages/compression.scm:1910 +#: gnu/packages/compression.scm:1987 msgid "Universal tool to manage file archives of various types" msgstr "Universelt værktøj til at håndtere filarkiver af diverse typer" -#: gnu/packages/compression.scm:1911 +#: gnu/packages/compression.scm:1988 msgid "" "The main command is @command{aunpack} which extracts files\n" "from an archive. The other commands provided are @command{apack} (to create\n" @@ -2263,11 +2376,11 @@ msgid "" "of archives." msgstr "" -#: gnu/packages/compression.scm:1933 +#: gnu/packages/compression.scm:2010 msgid "Generic archive extracting mechanism" msgstr "" -#: gnu/packages/compression.scm:1934 +#: gnu/packages/compression.scm:2011 msgid "" "It allows you to extract any archive file of the type .tar,\n" ".tar.gz, .gz, .Z, tar.bz2, .tbz, .bz2, .zip, .xz,, .txz, .tar.xz or .lzma\n" @@ -2275,21 +2388,21 @@ msgid "" "type by using either Perl modules, or command-line tools on your system." msgstr "" -#: gnu/packages/compression.scm:1970 +#: gnu/packages/compression.scm:2047 msgid "XZ in Java" msgstr "" -#: gnu/packages/compression.scm:1971 +#: gnu/packages/compression.scm:2048 msgid "" "Tukaani-xz is an implementation of xz compression/decompression\n" "algorithms in Java." msgstr "" -#: gnu/packages/compression.scm:1991 +#: gnu/packages/compression.scm:2068 msgid "Small, stand-alone lzip decompressor" msgstr "" -#: gnu/packages/compression.scm:1993 +#: gnu/packages/compression.scm:2070 msgid "" "Lunzip is a decompressor for files in the lzip compression format (.lz),\n" "written as a single small C tool with no dependencies. This makes it\n" @@ -2299,11 +2412,11 @@ msgid "" "Lunzip is intended to be fully compatible with the regular lzip package." msgstr "" -#: gnu/packages/compression.scm:2018 +#: gnu/packages/compression.scm:2095 msgid "Small, stand-alone lzip compressor and decompressor" msgstr "" -#: gnu/packages/compression.scm:2020 +#: gnu/packages/compression.scm:2097 msgid "" "Clzip is a compressor and decompressor for files in the lzip compression\n" "format (.lz), written as a single small C tool with no dependencies. This makes\n" @@ -2312,11 +2425,11 @@ msgid "" "Clzip is intended to be fully compatible with the regular lzip package." msgstr "" -#: gnu/packages/compression.scm:2047 +#: gnu/packages/compression.scm:2124 msgid "Lzip data compression C library" msgstr "Lzip-datakomprimerings-C-bibliotek" -#: gnu/packages/compression.scm:2049 +#: gnu/packages/compression.scm:2126 msgid "" "Lzlib is a C library for in-memory LZMA compression and decompression in\n" "the lzip format. It supports integrity checking of the decompressed data, and\n" @@ -2324,11 +2437,11 @@ msgid "" "corrupted input." msgstr "" -#: gnu/packages/compression.scm:2071 +#: gnu/packages/compression.scm:2148 msgid "Parallel lossless data compressor for the lzip format" msgstr "" -#: gnu/packages/compression.scm:2073 +#: gnu/packages/compression.scm:2150 msgid "" "Plzip is a massively parallel (multi-threaded) lossless data compressor\n" "and decompressor that uses the lzip file format (.lz). Files produced by plzip\n" @@ -2342,21 +2455,21 @@ msgid "" "single-member files which can't be decompressed in parallel." msgstr "" -#: gnu/packages/compression.scm:2107 +#: gnu/packages/compression.scm:2184 msgid "Tool for extracting Inno Setup installers" msgstr "" -#: gnu/packages/compression.scm:2108 +#: gnu/packages/compression.scm:2185 msgid "" "innoextract allows extracting Inno Setup installers under\n" "non-Windows systems without running the actual installer using wine." msgstr "" -#: gnu/packages/compression.scm:2144 +#: gnu/packages/compression.scm:2221 msgid "General-purpose lossless compression" msgstr "" -#: gnu/packages/compression.scm:2145 +#: gnu/packages/compression.scm:2222 msgid "" "This package provides the reference implementation of Brotli,\n" "a generic-purpose lossless compression algorithm that compresses data using a\n" @@ -2368,32 +2481,58 @@ msgid "" "The specification of the Brotli Compressed Data Format is defined in RFC 7932." msgstr "" -#: gnu/packages/databases.scm:158 -msgid "Clustered RDF storage and query engine" +#: gnu/packages/compression.scm:2245 +msgid "Portable lossless data compression library" +msgstr "Flytbart bibliotek til datakomprimering uden kvalitetstab" + +#: gnu/packages/compression.scm:2246 +msgid "" +"UCL implements a number of compression algorithms that\n" +"achieve an excellent compression ratio while allowing fast decompression.\n" +"Decompression requires no additional memory.\n" +"\n" +"Compared to LZO, the UCL algorithms achieve a better compression ratio but\n" +"decompression is a little bit slower." +msgstr "" + +#: gnu/packages/compression.scm:2302 +msgid "Compression tool for executables" +msgstr "Komprimeringsværktøj for kørbare filer" + +#: gnu/packages/compression.scm:2304 +msgid "" +"The Ultimate Packer for eXecutables (UPX) is an executable file\n" +"compressor. UPX typically reduces the file size of programs and shared\n" +"libraries by around 50%--70%, thus reducing disk space, network load times,\n" +"download times, and other distribution and storage costs." msgstr "" #: gnu/packages/databases.scm:159 +msgid "Clustered RDF storage and query engine" +msgstr "" + +#: gnu/packages/databases.scm:160 msgid "" "4store is a RDF/SPARQL store written in C, supporting\n" "either single machines or networked clusters." msgstr "" -#: gnu/packages/databases.scm:178 +#: gnu/packages/databases.scm:179 msgid "Hash library of database functions compatible with traditional dbm" -msgstr "" +msgstr "Hash-biblitoek for databasefunktioner kompatible med traditionel dbm" -#: gnu/packages/databases.scm:180 +#: gnu/packages/databases.scm:181 msgid "" "GDBM is a library for manipulating hashed databases. It is used to\n" "store key/value pairs in a file in a manner similar to the Unix dbm library\n" "and provides interfaces to the traditional file format." msgstr "" -#: gnu/packages/databases.scm:221 +#: gnu/packages/databases.scm:222 msgid "@code{mgo} offers a rich MongoDB driver for Go." msgstr "" -#: gnu/packages/databases.scm:223 +#: gnu/packages/databases.scm:224 msgid "" "@code{mgo} (pronounced as mango) is a MongoDB driver for the Go language.\n" "It implements a rich selection of features under a simple API following\n" @@ -2410,43 +2549,43 @@ msgid "" "SQL, Key/Value, XML/XQuery or Java Object storage for their data model." msgstr "" -#: gnu/packages/databases.scm:354 +#: gnu/packages/databases.scm:353 msgid "Utility for dumping and restoring ElasticSearch indexes" -msgstr "" +msgstr "Redskab til at dumpe og gendanne ElasticSearch-indeks" -#: gnu/packages/databases.scm:356 +#: gnu/packages/databases.scm:355 msgid "" "This package provides a utility for dumping the contents of an\n" "ElasticSearch index to a compressed file and restoring the dumpfile back to an\n" "ElasticSearch server" msgstr "" -#: gnu/packages/databases.scm:394 +#: gnu/packages/databases.scm:393 msgid "Fast key-value storage library" msgstr "" -#: gnu/packages/databases.scm:396 +#: gnu/packages/databases.scm:395 msgid "" "LevelDB is a fast key-value storage library that provides an ordered\n" "mapping from string keys to string values." msgstr "" -#: gnu/packages/databases.scm:417 -msgid "In memory caching service" +#: gnu/packages/databases.scm:416 +msgid "In-memory caching service" msgstr "" -#: gnu/packages/databases.scm:418 +#: gnu/packages/databases.scm:417 msgid "" -"Memcached is a in memory key value store. It has a small\n" +"Memcached is an in-memory key-value store. It has a small\n" "and generic API, and was originally intended for use with dynamic web\n" "applications." msgstr "" -#: gnu/packages/databases.scm:542 +#: gnu/packages/databases.scm:541 msgid "High performance and high availability document database" msgstr "" -#: gnu/packages/databases.scm:544 +#: gnu/packages/databases.scm:543 msgid "" "Mongo is a high-performance, high availability, schema-free\n" "document-oriented database. A key goal of MongoDB is to bridge the gap\n" @@ -2454,32 +2593,32 @@ msgid "" "RDBMS systems (which are deep in functionality)." msgstr "" -#: gnu/packages/databases.scm:620 +#: gnu/packages/databases.scm:613 msgid "Fast, easy to use, and popular database" msgstr "" -#: gnu/packages/databases.scm:622 +#: gnu/packages/databases.scm:615 msgid "" "MySQL is a fast, reliable, and easy to use relational database\n" "management system that supports the standardized Structured Query\n" "Language." msgstr "" -#: gnu/packages/databases.scm:698 +#: gnu/packages/databases.scm:797 msgid "SQL database server" msgstr "" -#: gnu/packages/databases.scm:700 +#: gnu/packages/databases.scm:799 msgid "" "MariaDB is a multi-user and multi-threaded SQL database server, designed\n" "as a drop-in replacement of MySQL." msgstr "" -#: gnu/packages/databases.scm:738 +#: gnu/packages/databases.scm:838 msgid "Powerful object-relational database system" msgstr "" -#: gnu/packages/databases.scm:740 +#: gnu/packages/databases.scm:840 msgid "" "PostgreSQL is a powerful object-relational database system. It is fully\n" "ACID compliant, has full support for foreign keys, joins, views, triggers, and\n" @@ -2489,11 +2628,21 @@ msgid "" "pictures, sounds, or video." msgstr "" -#: gnu/packages/databases.scm:779 +#: gnu/packages/databases.scm:880 +msgid "Pure-Python MySQL driver" +msgstr "" + +#: gnu/packages/databases.scm:882 +msgid "" +"PyMySQL is a pure-Python MySQL client library, based on PEP 249.\n" +"Most public APIs are compatible with @command{mysqlclient} and MySQLdb." +msgstr "" + +#: gnu/packages/databases.scm:907 msgid "Key-value database" msgstr "" -#: gnu/packages/databases.scm:780 +#: gnu/packages/databases.scm:908 msgid "" "QDBM is a library of routines for managing a\n" "database. The database is a simple data file containing key-value\n" @@ -2503,11 +2652,11 @@ msgid "" "organized in a hash table or B+ tree." msgstr "" -#: gnu/packages/databases.scm:835 +#: gnu/packages/databases.scm:963 msgid "Manipulate plain text files as databases" msgstr "" -#: gnu/packages/databases.scm:837 +#: gnu/packages/databases.scm:965 msgid "" "GNU Recutils is a set of tools and libraries for creating and\n" "manipulating text-based, human-editable databases. Despite being text-based,\n" @@ -2516,11 +2665,11 @@ msgid "" "types are supported, as is encryption." msgstr "" -#: gnu/packages/databases.scm:933 +#: gnu/packages/databases.scm:1061 msgid "Persistent key-value store for fast storage" msgstr "" -#: gnu/packages/databases.scm:935 +#: gnu/packages/databases.scm:1063 msgid "" "RocksDB is a library that forms the core building block for a fast\n" "key-value server, especially suited for storing data on flash drives. It\n" @@ -2531,11 +2680,11 @@ msgid "" "data in a single database. RocksDB is partially based on @code{LevelDB}." msgstr "" -#: gnu/packages/databases.scm:995 +#: gnu/packages/databases.scm:1123 msgid "Command-line tool for accessing SPARQL endpoints over HTTP" msgstr "" -#: gnu/packages/databases.scm:996 +#: gnu/packages/databases.scm:1124 msgid "" "Sparql-query is a command-line tool for accessing SPARQL\n" "endpoints over HTTP. It has been intentionally designed to 'feel' similar to\n" @@ -2546,11 +2695,23 @@ msgid "" "for example from a shell script." msgstr "" -#: gnu/packages/databases.scm:1038 +#: gnu/packages/databases.scm:1158 +msgid "Text console-based database viewer and editor" +msgstr "" + +#: gnu/packages/databases.scm:1160 +msgid "" +"SQLcrush lets you view and edit a database directly from the text\n" +"console through an ncurses interface. You can explore each table's structure,\n" +"browse and edit the contents, add and delete entries, all while tracking your\n" +"changes." +msgstr "" + +#: gnu/packages/databases.scm:1197 msgid "The SQLite database management system" msgstr "" -#: gnu/packages/databases.scm:1040 +#: gnu/packages/databases.scm:1199 msgid "" "SQLite is a software library that implements a self-contained, serverless,\n" "zero-configuration, transactional SQL database engine. SQLite is the most\n" @@ -2558,11 +2719,11 @@ msgid "" "is in the public domain." msgstr "" -#: gnu/packages/databases.scm:1098 +#: gnu/packages/databases.scm:1255 msgid "Trivial database" msgstr "" -#: gnu/packages/databases.scm:1100 +#: gnu/packages/databases.scm:1257 msgid "" "TDB is a Trivial Database. In concept, it is very much like GDBM,\n" "and BSD's DB except that it allows multiple simultaneous writers and uses\n" @@ -2570,19 +2731,19 @@ msgid "" "extremely small." msgstr "" -#: gnu/packages/databases.scm:1119 +#: gnu/packages/databases.scm:1276 msgid "Database independent interface for Perl" msgstr "" -#: gnu/packages/databases.scm:1120 +#: gnu/packages/databases.scm:1277 msgid "This package provides an database interface for Perl." msgstr "" -#: gnu/packages/databases.scm:1168 +#: gnu/packages/databases.scm:1325 msgid "Extensible and flexible object <-> relational mapper" msgstr "" -#: gnu/packages/databases.scm:1169 +#: gnu/packages/databases.scm:1326 msgid "" "An SQL to OO mapper with an object API inspired by\n" "Class::DBI (with a compatibility layer as a springboard for porting) and a\n" @@ -2594,21 +2755,21 @@ msgid "" "\"ORDER BY\" and \"HAVING\" support." msgstr "" -#: gnu/packages/databases.scm:1200 +#: gnu/packages/databases.scm:1357 msgid "Cursor with built-in caching support" msgstr "" -#: gnu/packages/databases.scm:1201 +#: gnu/packages/databases.scm:1358 msgid "" "DBIx::Class::Cursor::Cached provides a cursor class with\n" "built-in caching support." msgstr "" -#: gnu/packages/databases.scm:1223 +#: gnu/packages/databases.scm:1380 msgid "Introspect many-to-many relationships" msgstr "" -#: gnu/packages/databases.scm:1224 +#: gnu/packages/databases.scm:1381 msgid "" "Because the many-to-many relationships are not real\n" "relationships, they can not be introspected with DBIx::Class. Many-to-many\n" @@ -2618,22 +2779,22 @@ msgid "" "introspected and examined." msgstr "" -#: gnu/packages/databases.scm:1282 +#: gnu/packages/databases.scm:1439 msgid "Create a DBIx::Class::Schema based on a database" msgstr "Opret et DBIx::Class::Schema baseret på en database" -#: gnu/packages/databases.scm:1283 +#: gnu/packages/databases.scm:1440 msgid "" "DBIx::Class::Schema::Loader automates the definition of a\n" "DBIx::Class::Schema by scanning database table definitions and setting up the\n" "columns, primary keys, unique constraints and relationships." msgstr "" -#: gnu/packages/databases.scm:1307 +#: gnu/packages/databases.scm:1464 msgid "DBI PostgreSQL interface" msgstr "DBI PostgreSQL-grænseflade" -#: gnu/packages/databases.scm:1308 +#: gnu/packages/databases.scm:1465 msgid "" "This package provides a PostgreSQL driver for the Perl5\n" "@dfn{Database Interface} (DBI)." @@ -2641,11 +2802,11 @@ msgstr "" "Denne pakke tilbyder en PostgreSQL-driver for Perl5-\n" "@dfn{Database Interface} (DBI)." -#: gnu/packages/databases.scm:1332 +#: gnu/packages/databases.scm:1502 msgid "DBI MySQL interface" msgstr "DBI MySQL-grænseflade" -#: gnu/packages/databases.scm:1333 +#: gnu/packages/databases.scm:1503 msgid "" "This package provides a MySQL driver for the Perl5\n" "@dfn{Database Interface} (DBI)." @@ -2653,11 +2814,11 @@ msgstr "" "Denne pakke tilbyder en MySQL-driver for Perl5-\n" "@dfn{Database Interface} (DBI)." -#: gnu/packages/databases.scm:1352 +#: gnu/packages/databases.scm:1522 msgid "SQlite interface for Perl" msgstr "SQlite-grænseflade for Perl" -#: gnu/packages/databases.scm:1353 +#: gnu/packages/databases.scm:1523 msgid "" "DBD::SQLite is a Perl DBI driver for SQLite, that includes\n" "the entire thing in the distribution. So in order to get a fast transaction\n" @@ -2665,11 +2826,11 @@ msgid "" "module, and nothing else." msgstr "" -#: gnu/packages/databases.scm:1384 +#: gnu/packages/databases.scm:1554 msgid "Generate SQL from Perl data structures" msgstr "Opret SQL fra Perldatastrukturer" -#: gnu/packages/databases.scm:1385 +#: gnu/packages/databases.scm:1555 msgid "" "This module was inspired by the excellent DBIx::Abstract.\n" "While based on the concepts used by DBIx::Abstract, the concepts used have\n" @@ -2679,43 +2840,43 @@ msgid "" "time your data changes." msgstr "" -#: gnu/packages/databases.scm:1414 +#: gnu/packages/databases.scm:1584 msgid "Split SQL code into atomic statements" msgstr "" -#: gnu/packages/databases.scm:1415 +#: gnu/packages/databases.scm:1585 msgid "" "This module tries to split any SQL code, even including\n" "non-standard extensions, into the atomic statements it is composed of." msgstr "" -#: gnu/packages/databases.scm:1433 +#: gnu/packages/databases.scm:1603 msgid "SQL tokenizer" msgstr "" -#: gnu/packages/databases.scm:1434 +#: gnu/packages/databases.scm:1604 msgid "" "SQL::Tokenizer is a tokenizer for SQL queries. It does not\n" "claim to be a parser or query verifier. It just creates sane tokens from a\n" "valid SQL query." msgstr "" -#: gnu/packages/databases.scm:1452 +#: gnu/packages/databases.scm:1622 msgid "Data source abstraction library" msgstr "Abstraktionsbibliotek for datakilde" -#: gnu/packages/databases.scm:1453 +#: gnu/packages/databases.scm:1623 msgid "" "Unixodbc is a library providing an API with which to access\n" "data sources. Data sources include SQL Servers and any software with an ODBC\n" "Driver." msgstr "" -#: gnu/packages/databases.scm:1477 +#: gnu/packages/databases.scm:1647 msgid "In-memory key/value and document store" msgstr "" -#: gnu/packages/databases.scm:1479 +#: gnu/packages/databases.scm:1649 msgid "" "UnQLite is an in-process software library which implements a\n" "self-contained, serverless, zero-configuration, transactional NoSQL\n" @@ -2724,33 +2885,33 @@ msgid "" "similar to BerkeleyDB, LevelDB, etc." msgstr "" -#: gnu/packages/databases.scm:1507 +#: gnu/packages/databases.scm:1677 msgid "Key-value cache and store" msgstr "" -#: gnu/packages/databases.scm:1508 +#: gnu/packages/databases.scm:1678 msgid "" "Redis is an advanced key-value cache and store. Redis\n" "supports many data structures including strings, hashes, lists, sets, sorted\n" "sets, bitmaps and hyperloglogs." msgstr "" -#: gnu/packages/databases.scm:1535 +#: gnu/packages/databases.scm:1705 msgid "Kyoto Cabinet is a modern implementation of the DBM database" msgstr "" -#: gnu/packages/databases.scm:1537 +#: gnu/packages/databases.scm:1707 msgid "" "Kyoto Cabinet is a standalone file-based database that supports Hash\n" "and B+ Tree data storage models. It is a fast key-value lightweight\n" "database and supports many programming languages. It is a NoSQL database." msgstr "" -#: gnu/packages/databases.scm:1563 +#: gnu/packages/databases.scm:1733 msgid "Tokyo Cabinet is a modern implementation of the DBM database" msgstr "" -#: gnu/packages/databases.scm:1565 +#: gnu/packages/databases.scm:1735 msgid "" "Tokyo Cabinet is a library of routines for managing a database.\n" "The database is a simple data file containing records, each is a pair of a\n" @@ -2760,11 +2921,11 @@ msgid "" "organized in hash table, B+ tree, or fixed-length array." msgstr "" -#: gnu/packages/databases.scm:1601 +#: gnu/packages/databases.scm:1771 msgid "NoSQL data engine" msgstr "" -#: gnu/packages/databases.scm:1603 +#: gnu/packages/databases.scm:1773 msgid "" "WiredTiger is an extensible platform for data management. It supports\n" "row-oriented storage (where all columns of a row are stored together),\n" @@ -2773,31 +2934,31 @@ msgid "" "trees (LSM), for sustained throughput under random insert workloads." msgstr "" -#: gnu/packages/databases.scm:1648 +#: gnu/packages/databases.scm:1824 msgid "WiredTiger bindings for GNU Guile" msgstr "WiredTiger-bindinger for GNU Guile" -#: gnu/packages/databases.scm:1650 +#: gnu/packages/databases.scm:1826 msgid "" "This package provides Guile bindings to the WiredTiger ``NoSQL''\n" -"database. Various higher level database abstractions." +"database." msgstr "" -"Denne pakke tilbyder Guilebindinger til WiredTiger ``NoSQL''-\n" -"databasen. Diverse databaseabstraktioner på højere niveau." +"Denne pakke tilbyder Guilebindinger til WiredTiger »NoSQL«-databasen\n" +"." -#: gnu/packages/databases.scm:1682 +#: gnu/packages/databases.scm:1858 msgid "Perl5 access to Berkeley DB version 1.x" msgstr "Perl5-adgang til Berkeley DB version 1.x" -#: gnu/packages/databases.scm:1684 +#: gnu/packages/databases.scm:1860 msgid "The DB::File module provides Perl bindings to the Berkeley DB version 1.x." -msgstr "" +msgstr "DB::File-modulet tilbyder Perlbindinger til Berkeley DB version 1.x." -#: gnu/packages/databases.scm:1711 +#: gnu/packages/databases.scm:1887 msgid "Lightning Memory-Mapped Database library" msgstr "" -#: gnu/packages/databases.scm:1713 +#: gnu/packages/databases.scm:1889 msgid "" "The @dfn{Lightning Memory-Mapped Database} (LMDB) is a high-performance\n" "transactional database. Unlike more complex relational databases, LMDB handles\n" @@ -2810,22 +2971,22 @@ msgid "" "virtual address space — not physical RAM." msgstr "" -#: gnu/packages/databases.scm:1750 +#: gnu/packages/databases.scm:1926 msgid "C++ connector for PostgreSQL" -msgstr "" +msgstr "C++-forbindelse for PostgreSQL" -#: gnu/packages/databases.scm:1752 +#: gnu/packages/databases.scm:1928 msgid "" "Libpqxx is a C++ library to enable user programs to communicate with the\n" "PostgreSQL database back-end. The database back-end can be local or it may be\n" "on another machine, accessed via TCP/IP." msgstr "" -#: gnu/packages/databases.scm:1775 +#: gnu/packages/databases.scm:1951 msgid "Small object-relational mapping utility" msgstr "" -#: gnu/packages/databases.scm:1777 +#: gnu/packages/databases.scm:1953 msgid "" "Peewee is a simple and small ORM (object-relation mapping) tool. Peewee\n" "handles converting between pythonic values and those used by databases, so you\n" @@ -2834,11 +2995,11 @@ msgid "" "can autogenerate peewee models using @code{pwiz}, a model generator." msgstr "" -#: gnu/packages/databases.scm:1824 +#: gnu/packages/databases.scm:2000 msgid "Library providing transparent encryption of SQLite database files" msgstr "" -#: gnu/packages/databases.scm:1825 +#: gnu/packages/databases.scm:2001 msgid "" "SQLCipher is an implementation of SQLite, extended to\n" "provide transparent 256-bit AES encryption of database files. Pages are\n" @@ -2847,27 +3008,27 @@ msgid "" "development." msgstr "" -#: gnu/packages/databases.scm:1857 gnu/packages/databases.scm:1884 +#: gnu/packages/databases.scm:2033 gnu/packages/databases.scm:2060 msgid "Python ODBC Library" msgstr "" -#: gnu/packages/databases.scm:1858 +#: gnu/packages/databases.scm:2034 msgid "" "@code{python-pyodbc-c} provides a Python DB-API driver\n" "for ODBC." msgstr "" -#: gnu/packages/databases.scm:1885 +#: gnu/packages/databases.scm:2061 msgid "" "@code{python-pyodbc} provides a Python DB-API driver\n" "for ODBC." msgstr "" -#: gnu/packages/databases.scm:1922 +#: gnu/packages/databases.scm:2093 msgid "Read Microsoft Access databases" msgstr "" -#: gnu/packages/databases.scm:1923 +#: gnu/packages/databases.scm:2094 msgid "" "MDB Tools is a set of tools and applications to read the\n" "proprietary MDB file format used in Microsoft's Access database package. This\n" @@ -2876,42 +3037,42 @@ msgid "" "etc., and an SQL engine for performing simple SQL queries." msgstr "" -#: gnu/packages/databases.scm:1964 +#: gnu/packages/databases.scm:2137 msgid "Python binding for the ‘Lightning’ database (LMDB)" msgstr "" -#: gnu/packages/databases.scm:1966 +#: gnu/packages/databases.scm:2139 msgid "" "python-lmdb or py-lmdb is a Python binding for the @dfn{Lightning\n" "Memory-Mapped Database} (LMDB), a high-performance key-value store." msgstr "" -#: gnu/packages/databases.scm:2020 +#: gnu/packages/databases.scm:2193 msgid "ActiveRecord ORM for Python" msgstr "" -#: gnu/packages/databases.scm:2022 +#: gnu/packages/databases.scm:2195 msgid "" "Orator provides a simple ActiveRecord-like Object Relational Mapping\n" "implementation for Python." msgstr "" -#: gnu/packages/databases.scm:2055 +#: gnu/packages/databases.scm:2228 msgid "Multi-model database system" msgstr "" -#: gnu/packages/databases.scm:2056 +#: gnu/packages/databases.scm:2229 msgid "" "Virtuoso is a scalable cross-platform server that combines\n" "relational, graph, and document data management with web application server\n" "and web services platform functionality." msgstr "" -#: gnu/packages/databases.scm:2084 +#: gnu/packages/databases.scm:2260 msgid "Database interface and MySQL driver for R" msgstr "" -#: gnu/packages/databases.scm:2086 +#: gnu/packages/databases.scm:2262 msgid "" "This package provides a DBI interface to MySQL / MariaDB. The RMySQL\n" "package contains an old implementation based on legacy code from S-PLUS which\n" @@ -2919,24 +3080,24 @@ msgid "" "the RMariaDB package." msgstr "" -#: gnu/packages/databases.scm:2111 +#: gnu/packages/databases.scm:2287 msgid "" "Cassandra Cluster Manager for Apache Cassandra clusters on\n" "localhost" msgstr "" -#: gnu/packages/databases.scm:2113 +#: gnu/packages/databases.scm:2289 msgid "" "Cassandra Cluster Manager is a development tool for testing\n" "local Cassandra clusters. It creates, launches and removes Cassandra clusters\n" "on localhost." msgstr "" -#: gnu/packages/databases.scm:2139 +#: gnu/packages/databases.scm:2315 msgid "SQLite bindings for Python" msgstr "SQLite-bindinger for Python" -#: gnu/packages/databases.scm:2141 +#: gnu/packages/databases.scm:2317 msgid "" "Pysqlite provides SQLite bindings for Python that comply to the\n" "Database API 2.0T." @@ -2944,11 +3105,11 @@ msgstr "" "Pysqlite tilbyder SQLite-bindinger for Python som overholder\n" "Database API 2.OT'en." -#: gnu/packages/databases.scm:2168 +#: gnu/packages/databases.scm:2344 msgid "Database abstraction library" msgstr "Abstraktionsbibliotek for database" -#: gnu/packages/databases.scm:2170 +#: gnu/packages/databases.scm:2346 msgid "" "SQLAlchemy is the Python SQL toolkit and Object Relational Mapper that\n" "gives application developers the full power and flexibility of SQL. It\n" @@ -2957,11 +3118,11 @@ msgid "" "simple and Pythonic domain language." msgstr "" -#: gnu/packages/databases.scm:2209 +#: gnu/packages/databases.scm:2385 msgid "Various utility functions for SQLAlchemy" msgstr "Diverse redskabsfunktioner for SQLAlchemy" -#: gnu/packages/databases.scm:2211 +#: gnu/packages/databases.scm:2387 msgid "" "SQLAlchemy-utils provides various utility functions and custom data types\n" "for SQLAlchemy. SQLAlchemy is an SQL database abstraction library for Python.\n" @@ -2978,21 +3139,21 @@ msgid "" "@end enumerate\n" msgstr "" -#: gnu/packages/databases.scm:2252 +#: gnu/packages/databases.scm:2428 msgid "Database migration tool for SQLAlchemy" msgstr "" -#: gnu/packages/databases.scm:2254 +#: gnu/packages/databases.scm:2430 msgid "" "Alembic is a lightweight database migration tool for usage with the\n" "SQLAlchemy Database Toolkit for Python." msgstr "" -#: gnu/packages/databases.scm:2280 +#: gnu/packages/databases.scm:2456 msgid "Tiny key value database with concurrency support" msgstr "" -#: gnu/packages/databases.scm:2282 +#: gnu/packages/databases.scm:2458 msgid "" "PickleShare is a small ‘shelve’-like datastore with concurrency support.\n" "Like shelve, a PickleShareDB object acts like a normal dictionary. Unlike\n" @@ -3003,11 +3164,11 @@ msgid "" "PickleShare." msgstr "" -#: gnu/packages/databases.scm:2334 +#: gnu/packages/databases.scm:2510 msgid "Another Python SQLite Wrapper" msgstr "" -#: gnu/packages/databases.scm:2335 +#: gnu/packages/databases.scm:2511 msgid "" "APSW is a Python wrapper for the SQLite\n" "embedded relational database engine. In contrast to other wrappers such as\n" @@ -3015,22 +3176,22 @@ msgid "" "translate the complete SQLite API into Python." msgstr "" -#: gnu/packages/databases.scm:2359 +#: gnu/packages/databases.scm:2535 msgid "Neo4j driver code written in Python" msgstr "Neo4j-driverkode skrevet i Python" -#: gnu/packages/databases.scm:2360 +#: gnu/packages/databases.scm:2536 msgid "" "This package provides the Neo4j Python driver that connects\n" "to the database using Neo4j's binary protocol. It aims to be minimal, while\n" "being idiomatic to Python." msgstr "" -#: gnu/packages/databases.scm:2379 +#: gnu/packages/databases.scm:2555 msgid "Library and toolkit for working with Neo4j in Python" msgstr "Bibliotek og værktøjssæt for arbejde med neo4j i Python" -#: gnu/packages/databases.scm:2380 +#: gnu/packages/databases.scm:2556 msgid "" "This package provides a client library and toolkit for\n" "working with Neo4j from within Python applications and from the command\n" @@ -3038,30 +3199,34 @@ msgid "" "designed to be easy and intuitive to use." msgstr "" -#: gnu/packages/databases.scm:2405 +#: gnu/packages/databases.scm:2581 msgid "Python PostgreSQL adapter" msgstr "Python PostgreSQL-adapter" -#: gnu/packages/databases.scm:2407 -msgid "psycopg2 is a thread-safe PostgreSQL adapter that implements DB-API 2.0. " -msgstr "psycopg2 er en trådsikker PostgreSQL-adapter som implementerer DB-API 2.0. " - -#: gnu/packages/databases.scm:2431 -msgid "SQLAlchemy schema displayer" +#: gnu/packages/databases.scm:2583 +msgid "" +"psycopg2 is a thread-safe PostgreSQL adapter that implements DB-API\n" +"2.0." msgstr "" +"psycopg2 er en trådsikker PostgreSQL-adapter som implementerer DB-API\n" +"2.0." -#: gnu/packages/databases.scm:2432 +#: gnu/packages/databases.scm:2608 +msgid "SQLAlchemy schema displayer" +msgstr "SQLAlchemy-skemaviser" + +#: gnu/packages/databases.scm:2609 msgid "" "This package provides a program to build Entity\n" "Relationship diagrams from a SQLAlchemy model (or directly from the\n" "database)." msgstr "" -#: gnu/packages/databases.scm:2462 +#: gnu/packages/databases.scm:2639 msgid "MySQLdb is an interface to the popular MySQL database server for Python" msgstr "" -#: gnu/packages/databases.scm:2463 +#: gnu/packages/databases.scm:2640 msgid "" "MySQLdb is an interface to the popular MySQL database server\n" "for Python. The design goals are:\n" @@ -3072,85 +3237,86 @@ msgid "" "@end enumerate" msgstr "" -#: gnu/packages/databases.scm:2491 +#: gnu/packages/databases.scm:2668 msgid "Python extension that wraps protocol parsing code in hiredis" msgstr "" -#: gnu/packages/databases.scm:2492 +#: gnu/packages/databases.scm:2669 msgid "" "Python-hiredis is a python extension that wraps protocol\n" "parsing code in hiredis. It primarily speeds up parsing of multi bulk replies." msgstr "" -#: gnu/packages/databases.scm:2515 +#: gnu/packages/databases.scm:2692 msgid "Fake implementation of redis API for testing purposes" msgstr "" -#: gnu/packages/databases.scm:2516 +#: gnu/packages/databases.scm:2694 msgid "" -"Fakeredis is a pure python implementation of the redis-py\n" -"python client that simulates talking to a redis server. This was created for a\n" -"single purpose: to write unittests. Setting up redis is not hard, but many time\n" -" you want to write unittests that do not talk to an external server (such as\n" -"redis). This module now allows tests to simply use this module as a reasonable\n" -"substitute for redis." +"Fakeredis is a pure-Python implementation of the redis-py Python client\n" +"that simulates talking to a redis server. It was created for a single purpose:\n" +"to write unit tests.\n" +"\n" +"Setting up redis is not hard, but one often wants to write unit tests that don't\n" +"talk to an external server such as redis. This module can be used as a\n" +"reasonable substitute." msgstr "" -#: gnu/packages/databases.scm:2544 +#: gnu/packages/databases.scm:2723 msgid "Redis Python client" msgstr "" -#: gnu/packages/databases.scm:2546 +#: gnu/packages/databases.scm:2725 msgid "This package provides a Python interface to the Redis key-value store." msgstr "Denne pakke tilbyder en Pythongrænseflade til Redis' nøgle-værdi-lager." -#: gnu/packages/databases.scm:2567 +#: gnu/packages/databases.scm:2746 msgid "Simple job queues for Python" msgstr "Simple jobkøer for Python" -#: gnu/packages/databases.scm:2569 +#: gnu/packages/databases.scm:2748 msgid "" "RQ (Redis Queue) is a simple Python library for queueing jobs and\n" "processing them in the background with workers. It is backed by Redis and it\n" "is designed to have a low barrier to entry." msgstr "" -#: gnu/packages/databases.scm:2592 +#: gnu/packages/databases.scm:2771 msgid "Port of asyncio-redis to trollius" msgstr "" -#: gnu/packages/databases.scm:2593 +#: gnu/packages/databases.scm:2772 msgid "" "@code{trollius-redis} is a Redis client for Python\n" " trollius. It is an asynchronious IO (PEP 3156) implementation of the\n" " Redis protocol." msgstr "" -#: gnu/packages/databases.scm:2620 +#: gnu/packages/databases.scm:2799 msgid "Non-validating SQL parser" msgstr "" -#: gnu/packages/databases.scm:2621 +#: gnu/packages/databases.scm:2800 msgid "" "Sqlparse is a non-validating SQL parser for Python. It\n" "provides support for parsing, splitting and formatting SQL statements." msgstr "" -#: gnu/packages/databases.scm:2641 +#: gnu/packages/databases.scm:2820 msgid "Library to write SQL queries in a pythonic way" msgstr "" -#: gnu/packages/databases.scm:2642 +#: gnu/packages/databases.scm:2821 msgid "" "@code{python-sql} is a library to write SQL queries, that\n" "transforms idiomatic python function calls to well-formed SQL queries." msgstr "" -#: gnu/packages/databases.scm:2727 +#: gnu/packages/databases.scm:2906 msgid "Various tools for interacting with MongoDB and BSON" msgstr "" -#: gnu/packages/databases.scm:2729 +#: gnu/packages/databases.scm:2908 msgid "" "This package includes a collection of tools related to MongoDB.\n" "@table @code\n" @@ -3175,11 +3341,11 @@ msgid "" "@end table" msgstr "" -#: gnu/packages/databases.scm:2815 +#: gnu/packages/databases.scm:2994 msgid "Columnar in-memory analytics" msgstr "" -#: gnu/packages/databases.scm:2816 +#: gnu/packages/databases.scm:2995 msgid "" "Apache Arrow is a columnar in-memory analytics layer\n" "designed to accelerate big data. It houses a set of canonical in-memory\n" @@ -3188,11 +3354,11 @@ msgid "" "algorithm implementations." msgstr "" -#: gnu/packages/databases.scm:2860 +#: gnu/packages/databases.scm:3039 msgid "Python bindings for Apache Arrow" msgstr "Pythonbindinger for Apache Arrow" -#: gnu/packages/databases.scm:2861 +#: gnu/packages/databases.scm:3040 msgid "" "This library provides a Pythonic API wrapper for the reference\n" "Arrow C++ implementation, along with tools for interoperability with pandas,\n" @@ -3239,11 +3405,11 @@ msgid "" "down the road." msgstr "" -#: gnu/packages/debug.scm:308 +#: gnu/packages/debug.scm:305 msgid "Expose race conditions in Makefiles" msgstr "" -#: gnu/packages/debug.scm:310 +#: gnu/packages/debug.scm:307 msgid "" "Stress Make is a customized GNU Make that explicitely manages the order\n" "in which concurrent jobs are run to provoke erroneous behavior into becoming\n" @@ -3253,33 +3419,33 @@ msgid "" "conditions." msgstr "" -#: gnu/packages/debug.scm:337 +#: gnu/packages/debug.scm:334 msgid "Transparent application input fuzzer" msgstr "" -#: gnu/packages/debug.scm:338 +#: gnu/packages/debug.scm:335 msgid "" "Zzuf is a transparent application input fuzzer. It works by\n" "intercepting file operations and changing random bits in the program's\n" "input. Zzuf's behaviour is deterministic, making it easy to reproduce bugs." msgstr "" -#: gnu/packages/dejagnu.scm:77 +#: gnu/packages/dejagnu.scm:78 msgid "GNU software testing framework" msgstr "" -#: gnu/packages/dejagnu.scm:79 +#: gnu/packages/dejagnu.scm:80 msgid "" "DejaGnu is a framework for testing software. In effect, it serves as\n" "a front-end for all tests written for a program. Thus, each program can have\n" "multiple test suites, which are then all managed by a single harness." msgstr "" -#: gnu/packages/games.scm:168 +#: gnu/packages/games.scm:176 msgid "Tron clone in 3D" msgstr "" -#: gnu/packages/games.scm:169 +#: gnu/packages/games.scm:177 msgid "" "Armagetron is a multiplayer game in 3d that attempts to\n" "emulate and expand on the lightcycle sequence from the movie Tron. It's\n" @@ -3289,26 +3455,40 @@ msgid "" "settings to tweak as well." msgstr "" -#: gnu/packages/games.scm:242 +#: gnu/packages/games.scm:239 +msgid "Antagonistic Tetris-style falling brick game for text terminals" +msgstr "" + +#: gnu/packages/games.scm:241 +msgid "" +"Bastet (short for Bastard Tetris) is a simple ncurses-based falling brick\n" +"game. Unlike normal Tetris, Bastet does not choose the next brick at random.\n" +"Instead, it uses a special algorithm to choose the worst brick possible.\n" +"\n" +"Playing bastet can be a painful experience, especially if you usually make\n" +"canyons and wait for the long I-shaped block to clear four rows at a time." +msgstr "" + +#: gnu/packages/games.scm:305 msgid "Survival horror roguelike video game" msgstr "" -#: gnu/packages/games.scm:244 +#: gnu/packages/games.scm:307 msgid "" -"Cataclysm: Dark Days Ahead is a roguelike set in a post-apocalyptic world.\n" -"Struggle to survive in a harsh, persistent, procedurally generated world.\n" -"Scavenge the remnants of a dead civilization for food, equipment, or, if you are\n" -"lucky, a vehicle with a full tank of gas to get you out of Dodge. Fight to\n" -"defeat or escape from a wide variety of powerful monstrosities, from zombies to\n" -"giant insects to killer robots and things far stranger and deadlier, and against\n" -"the others like yourself, that want what you have." +"Cataclysm: Dark Days Ahead is a roguelike set in a post-apocalyptic\n" +"world. Struggle to survive in a harsh, persistent, procedurally generated\n" +"world. Scavenge the remnants of a dead civilization for food, equipment, or,\n" +"if you are lucky, a vehicle with a full tank of gas to get you out of Dodge.\n" +"Fight to defeat or escape from a wide variety of powerful monstrosities, from\n" +"zombies to giant insects to killer robots and things far stranger and deadlier,\n" +"and against the others like yourself, that want what you have." msgstr "" -#: gnu/packages/games.scm:285 +#: gnu/packages/games.scm:348 msgid "Speaking cow text filter" msgstr "" -#: gnu/packages/games.scm:286 +#: gnu/packages/games.scm:349 msgid "" "Cowsay is basically a text filter. Send some text into it,\n" "and you get a cow saying your text. If you think a talking cow isn't enough,\n" @@ -3316,11 +3496,11 @@ msgid "" "tired of cows, a variety of other ASCII-art messengers are available." msgstr "" -#: gnu/packages/games.scm:352 +#: gnu/packages/games.scm:416 msgid "Free content game based on the Doom engine" msgstr "" -#: gnu/packages/games.scm:361 +#: gnu/packages/games.scm:425 msgid "" "The Freedoom project aims to create a complete free content first person\n" "shooter game. Freedoom by itself is just the raw material for a game: it must\n" @@ -3329,11 +3509,25 @@ msgid "" "effects and music to make a completely free game." msgstr "" -#: gnu/packages/games.scm:435 +#: gnu/packages/games.scm:473 +msgid "Isometric role-playing game against killer robots" +msgstr "" + +#: gnu/packages/games.scm:475 +msgid "" +"Freedroid RPG is an @dfn{RPG} (Role-Playing Game) with isometric graphics.\n" +"The game tells the story of a world destroyed by a conflict between robots and\n" +"their human masters. To restore peace to humankind, the player must complete\n" +"numerous quests while fighting off rebelling robots---either by taking control\n" +"of them, or by simply blasting them to pieces with melee and ranged weapons in\n" +"real-time combat." +msgstr "" + +#: gnu/packages/games.scm:552 msgid "Software for exploring cellular automata" msgstr "" -#: gnu/packages/games.scm:437 +#: gnu/packages/games.scm:554 msgid "" "Golly simulates Conway's Game of Life and many other types of cellular\n" "automata. The following features are available:\n" @@ -3354,11 +3548,11 @@ msgid "" "@end enumerate" msgstr "" -#: gnu/packages/games.scm:499 +#: gnu/packages/games.scm:602 msgid "Puzzle/platform game" msgstr "Puslespil/platformsspil" -#: gnu/packages/games.scm:500 +#: gnu/packages/games.scm:603 msgid "" "Me and My Shadow is a puzzle/platform game in which you try\n" "to reach the exit by solving puzzles. Spikes, moving blocks, fragile blocks\n" @@ -3366,11 +3560,11 @@ msgid "" "shadow mimic them to reach blocks you couldn't reach alone." msgstr "" -#: gnu/packages/games.scm:535 +#: gnu/packages/games.scm:638 msgid "Multiplayer dungeon game involving knights and quests" msgstr "" -#: gnu/packages/games.scm:536 +#: gnu/packages/games.scm:639 msgid "" "Knights is a multiplayer game involving several knights who\n" "must run around a dungeon and complete various quests. Each game revolves\n" @@ -3382,15 +3576,15 @@ msgid "" "destroying an ancient book using a special wand." msgstr "" -#: gnu/packages/games.scm:573 +#: gnu/packages/games.scm:676 msgid "Backgammon game" msgstr "Backgammonspil" -#: gnu/packages/games.scm:574 +#: gnu/packages/games.scm:677 msgid "" -"The GNU backgammon application can be used for playing, analyzing and\n" -"teaching the game. It has an advanced evaluation engine based on artificial\n" -"neural networks suitable for both beginners and advanced players. In\n" +"The GNU backgammon application can be used for playing,\n" +"analyzing and teaching the game. It has an advanced evaluation engine based on\n" +"artificial neural networks suitable for both beginners and advanced players. In\n" "addition to a command-line interface, it also features an attractive, 3D\n" "representation of the playing board." msgstr "" @@ -3400,11 +3594,11 @@ msgstr "" "avancerede spillere. Udover grænsefladen for kommandolinjen har\n" "spillet også en attraktiv 3D-repræsentation af brættet." -#: gnu/packages/games.scm:603 +#: gnu/packages/games.scm:706 msgid "3d Rubik's cube game" -msgstr "" +msgstr "3D Rubiks terning" -#: gnu/packages/games.scm:605 +#: gnu/packages/games.scm:708 msgid "" "GNUbik is a puzzle game in which you must manipulate a cube to make\n" "each of its faces have a uniform color. The game is customizable, allowing\n" @@ -3413,21 +3607,21 @@ msgid "" "scriptable with Guile." msgstr "" -#: gnu/packages/games.scm:627 +#: gnu/packages/games.scm:730 msgid "The game of Shogi (Japanese chess)" msgstr "Spillet Shogi (japansk skak)" -#: gnu/packages/games.scm:628 +#: gnu/packages/games.scm:731 msgid "" "GNU Shogi is a program that plays the game Shogi (Japanese\n" "Chess). It is similar to standard chess but this variant is far more complicated." msgstr "" -#: gnu/packages/games.scm:659 +#: gnu/packages/games.scm:762 msgid "Tetris clone based on the SDL library" -msgstr "" +msgstr "Tetrisklon baseret på SDL-biblioteket" -#: gnu/packages/games.scm:661 +#: gnu/packages/games.scm:764 msgid "" "LTris is a tetris clone: differently shaped blocks are falling down the\n" "rectangular playing field and can be moved sideways or rotated by 90 degree\n" @@ -3441,19 +3635,50 @@ msgid "" "watch your CPU playing while enjoying a cup of tea!" msgstr "" -#: gnu/packages/games.scm:712 +#: gnu/packages/games.scm:886 +msgid "Classic dungeon crawl game" +msgstr "" + +#: gnu/packages/games.scm:887 +msgid "" +"NetHack is a single player dungeon exploration game that runs\n" +"on a wide variety of computer systems, with a variety of graphical and text\n" +"interfaces all using the same game engine. Unlike many other Dungeons &\n" +"Dragons-inspired games, the emphasis in NetHack is on discovering the detail of\n" +"the dungeon and not simply killing everything in sight - in fact, killing\n" +"everything in sight is a good way to die quickly. Each game presents a\n" +"different landscape - the random number generator provides an essentially\n" +"unlimited number of variations of the dungeon and its denizens to be discovered\n" +"by the player in one of a number of characters: you can pick your race, your\n" +"role, and your gender." +msgstr "" + +#: gnu/packages/games.scm:932 +msgid "Logical tile puzzle" +msgstr "" + +#: gnu/packages/games.scm:934 +msgid "" +"PipeWalker is a simple puzzle game with many diffent themes: connect all\n" +"computers to one network server, bring water from a source to the taps, etc.\n" +"The underlying mechanism is always the same: you must turn each tile in the\n" +"grid in the right direction to combine all components into a single circuit.\n" +"Every puzzle has a complete solution, although there may be more than one." +msgstr "" + +#: gnu/packages/games.scm:982 msgid "Version of the classic 3D shoot'em'up game Doom" msgstr "Version af det klassiske 3D-skydespil Doom" -#: gnu/packages/games.scm:714 +#: gnu/packages/games.scm:984 msgid "PrBoom+ is a Doom source port developed from the original PrBoom project." msgstr "PrBoom+ er en Doom-kildeport udviklet fra det oprindelige PrBoom-projekt." -#: gnu/packages/games.scm:761 +#: gnu/packages/games.scm:1032 msgid "Action platformer game" msgstr "Platformsspil" -#: gnu/packages/games.scm:763 +#: gnu/packages/games.scm:1034 msgid "" "ReTux is an action platformer loosely inspired by the Mario games,\n" "utilizing the art assets from the @code{SuperTux} project." @@ -3461,11 +3686,11 @@ msgstr "" "ReTux er et platformspil løst inspireret af Mariospillene,\n" "der udnytter grafikken fra projektet @code{SuperTux}." -#: gnu/packages/games.scm:849 +#: gnu/packages/games.scm:1140 msgid "A classical roguelike/sandbox game" msgstr "" -#: gnu/packages/games.scm:851 +#: gnu/packages/games.scm:1142 msgid "" "RogueBox Adventures is a graphical roguelike with strong influences\n" "from sandbox games like Minecraft or Terraria. The main idea of RogueBox\n" @@ -3473,19 +3698,19 @@ msgid "" "can be explored and changed freely." msgstr "" -#: gnu/packages/games.scm:878 +#: gnu/packages/games.scm:1169 msgid "User interface for gnushogi" msgstr "Brugergrænseflade for gnushogi" -#: gnu/packages/games.scm:879 +#: gnu/packages/games.scm:1170 msgid "A graphical user interface for the package @code{gnushogi}." msgstr "En grafisk brugerflade for pakken @code{gnushogi}." -#: gnu/packages/games.scm:928 +#: gnu/packages/games.scm:1221 msgid "GNU/Linux port of the indie game \"l'Abbaye des Morts\"" msgstr "GNU/Linux-port af indiespillet »l'Abbaye des Morts«" -#: gnu/packages/games.scm:929 +#: gnu/packages/games.scm:1222 msgid "" "L'Abbaye des Morts is a 2D platform game set in 13th century\n" "France. The Cathars, who preach about good Christian beliefs, were being\n" @@ -3494,22 +3719,22 @@ msgid "" "that beneath its ruins lay buried an ancient evil." msgstr "" -#: gnu/packages/games.scm:981 +#: gnu/packages/games.scm:1275 msgid "Dungeon exploration roguelike" msgstr "" -#: gnu/packages/games.scm:982 +#: gnu/packages/games.scm:1276 msgid "" "Angband is a Classic dungeon exploration roguelike. Explore\n" "the depths below Angband, seeking riches, fighting monsters, and preparing to\n" "fight Morgoth, the Lord of Darkness." msgstr "" -#: gnu/packages/games.scm:1018 +#: gnu/packages/games.scm:1312 msgid "Lemmings clone" msgstr "Lemmingsklon" -#: gnu/packages/games.scm:1020 +#: gnu/packages/games.scm:1314 msgid "" "Pingus is a free Lemmings-like puzzle game in which the player takes\n" "command of a bunch of small animals and has to guide them through levels.\n" @@ -3519,22 +3744,22 @@ msgid "" "level's exit. The game is presented in a 2D side view." msgstr "" -#: gnu/packages/games.scm:1042 +#: gnu/packages/games.scm:1336 msgid "Convert English text to humorous dialects" msgstr "" -#: gnu/packages/games.scm:1043 +#: gnu/packages/games.scm:1337 msgid "" "The GNU Talk Filters are programs that convert English text\n" "into stereotyped or otherwise humorous dialects. The filters are provided as\n" "a C library, so they can easily be integrated into other programs." msgstr "" -#: gnu/packages/games.scm:1075 +#: gnu/packages/games.scm:1369 msgid "Simulate the display from \"The Matrix\"" msgstr "Simuler skærmen fra »The Matrix«" -#: gnu/packages/games.scm:1076 +#: gnu/packages/games.scm:1370 msgid "" "CMatrix simulates the display from \"The Matrix\" and is\n" "based on the screensaver from the movie's website. It works with terminal\n" @@ -3542,22 +3767,22 @@ msgid "" "asynchronously and at a user-defined speed." msgstr "" -#: gnu/packages/games.scm:1096 +#: gnu/packages/games.scm:1390 msgid "Full chess implementation" msgstr "Fuld skakimplementering" -#: gnu/packages/games.scm:1097 +#: gnu/packages/games.scm:1391 msgid "" "GNU Chess is a chess engine. It allows you to compete\n" "against the computer in a game of chess, either through the default terminal\n" "interface or via an external visual interface such as GNU XBoard." msgstr "" -#: gnu/packages/games.scm:1125 +#: gnu/packages/games.scm:1419 msgid "Twisted adventures of young pig farmer Dink Smallwood" msgstr "" -#: gnu/packages/games.scm:1127 +#: gnu/packages/games.scm:1421 msgid "" "GNU FreeDink is a free and portable re-implementation of the engine\n" "for the role-playing game Dink Smallwood. It supports not only the original\n" @@ -3565,19 +3790,31 @@ msgid "" "To that extent, it also includes a front-end for managing all of your D-Mods." msgstr "" -#: gnu/packages/games.scm:1152 +#: gnu/packages/games.scm:1446 msgid "Game data for GNU Freedink" msgstr "Spildata for GNU Freedink" -#: gnu/packages/games.scm:1154 +#: gnu/packages/games.scm:1448 msgid "This package contains the game data of GNU Freedink." msgstr "Denne pakke indeholder spildataen for GNU Freedink." -#: gnu/packages/games.scm:1206 +#: gnu/packages/games.scm:1469 +msgid "Front-end for managing and playing Dink Modules" +msgstr "Brugerflade til at håndtere og spille Dinkmoduler" + +#: gnu/packages/games.scm:1470 +msgid "" +"DFArc makes it easy to play and manage the GNU FreeDink game\n" +"and its numerous D-Mods." +msgstr "" +"DFarc gør det nemt at spille og håndtere GNU FreeDink-spillet\n" +"og dets utallige D-Mod'er." + +#: gnu/packages/games.scm:1522 msgid "Graphical user interface for chess programs" msgstr "Grafisk brugerflade for skakprogrammer" -#: gnu/packages/games.scm:1207 +#: gnu/packages/games.scm:1523 msgid "" "GNU XBoard is a graphical board for all varieties of chess,\n" "including international chess, xiangqi (Chinese chess), shogi (Japanese chess)\n" @@ -3586,11 +3823,11 @@ msgid "" "Portable Game Notation." msgstr "" -#: gnu/packages/games.scm:1261 +#: gnu/packages/games.scm:1577 msgid "Ball and paddle game" msgstr "" -#: gnu/packages/games.scm:1262 +#: gnu/packages/games.scm:1578 msgid "" "XBoing is a blockout type game where you have a paddle which\n" "you control to bounce a ball around the game zone destroying blocks with a\n" @@ -3598,11 +3835,11 @@ msgid "" "destroy, the better your score. The person with the highest score wins." msgstr "" -#: gnu/packages/games.scm:1294 +#: gnu/packages/games.scm:1612 msgid "Typing tutor" msgstr "" -#: gnu/packages/games.scm:1296 +#: gnu/packages/games.scm:1614 msgid "" "GNU Typist is a universal typing tutor. It can be used to learn and\n" "practice touch-typing. Several tutorials are included; in addition to\n" @@ -3611,11 +3848,11 @@ msgid "" "are primarily in English, however some in other languages are provided." msgstr "" -#: gnu/packages/games.scm:1343 +#: gnu/packages/games.scm:1680 msgid "3D game engine written in C++" msgstr "3D-spilmotor skrevet i C++" -#: gnu/packages/games.scm:1345 +#: gnu/packages/games.scm:1682 msgid "" "The Irrlicht Engine is a high performance realtime 3D engine written in\n" "C++. Features include an OpenGL renderer, extensible materials, scene graph\n" @@ -3623,11 +3860,11 @@ msgid "" "for common mesh file formats, and collision detection." msgstr "" -#: gnu/packages/games.scm:1397 +#: gnu/packages/games.scm:1734 msgid "2D space shooter" msgstr "2D-rumskyder" -#: gnu/packages/games.scm:1399 +#: gnu/packages/games.scm:1736 msgid "" "M.A.R.S. is a 2D space shooter with pretty visual effects and\n" "attractive physics. Players can battle each other or computer controlled\n" @@ -3635,19 +3872,19 @@ msgid "" "match, cannon keep, and grave-itation pit." msgstr "" -#: gnu/packages/games.scm:1440 +#: gnu/packages/games.scm:1770 msgid "Main game data for the Minetest game engine" msgstr "Spildata for spilmotoren Minetest" -#: gnu/packages/games.scm:1442 +#: gnu/packages/games.scm:1772 msgid "Game data for the Minetest infinite-world block sandox game." msgstr "" -#: gnu/packages/games.scm:1494 +#: gnu/packages/games.scm:1832 msgid "Infinite-world block sandbox game" msgstr "" -#: gnu/packages/games.scm:1496 +#: gnu/packages/games.scm:1834 msgid "" "Minetest is a sandbox construction game. Players can create and destroy\n" "various types of blocks in a three-dimensional open world. This allows\n" @@ -3656,11 +3893,11 @@ msgid "" "in different ways." msgstr "" -#: gnu/packages/games.scm:1535 +#: gnu/packages/games.scm:1873 msgid "Curses Implementation of the Glk API" msgstr "Curses-implementering af Glk-API'en" -#: gnu/packages/games.scm:1537 +#: gnu/packages/games.scm:1875 msgid "" "Glk defines a portable API for applications with text UIs. It was\n" "primarily designed for interactive fiction, but it should be suitable for many\n" @@ -3669,11 +3906,11 @@ msgid "" "using the @code{curses.h} library for screen control." msgstr "" -#: gnu/packages/games.scm:1575 +#: gnu/packages/games.scm:1913 msgid "Interpreter for Glulx VM" msgstr "Fortolker for Glulx VM" -#: gnu/packages/games.scm:1577 +#: gnu/packages/games.scm:1915 msgid "" "Glulx is a 32-bit portable virtual machine intended for writing and\n" "playing interactive fiction. It was designed by Andrew Plotkin to relieve\n" @@ -3681,22 +3918,22 @@ msgid "" "reference interpreter, using the Glk API." msgstr "" -#: gnu/packages/games.scm:1614 +#: gnu/packages/games.scm:1949 msgid "Z-machine interpreter" msgstr "" -#: gnu/packages/games.scm:1616 +#: gnu/packages/games.scm:1951 msgid "" "Fizmo is a console-based Z-machine interpreter. It is used to play\n" "interactive fiction, also known as text adventures, which were implemented\n" "either by Infocom or created using the Inform compiler." msgstr "" -#: gnu/packages/games.scm:1634 +#: gnu/packages/games.scm:1969 msgid "Play the game of Go" msgstr "Spil Go" -#: gnu/packages/games.scm:1636 +#: gnu/packages/games.scm:1971 msgid "" "GNU Go is a program that plays the game of Go, in which players\n" "place stones on a grid to form territory or capture other stones. While\n" @@ -3707,11 +3944,11 @@ msgid "" "Protocol)." msgstr "" -#: gnu/packages/games.scm:1664 -msgid "High speed arctic racing game based on Tux Racer" +#: gnu/packages/games.scm:1999 +msgid "High-speed arctic racing game based on Tux Racer" msgstr "" -#: gnu/packages/games.scm:1666 +#: gnu/packages/games.scm:2001 msgid "" "Extreme Tux Racer, or etracer as it is called for short, is\n" "a simple OpenGL racing game featuring Tux, the Linux mascot. The goal of the\n" @@ -3724,11 +3961,11 @@ msgid "" "This game is based on the GPL version of the famous game TuxRacer." msgstr "" -#: gnu/packages/games.scm:1748 +#: gnu/packages/games.scm:2083 msgid "3D kart racing game" msgstr "" -#: gnu/packages/games.scm:1749 +#: gnu/packages/games.scm:2084 msgid "" "SuperTuxKart is a 3D kart racing game, with a focus on\n" "having fun over realism. You can play with up to 4 friends on one PC, racing\n" @@ -3736,11 +3973,11 @@ msgid "" "also available." msgstr "" -#: gnu/packages/games.scm:1781 +#: gnu/packages/games.scm:2116 msgid "Game of jumping to the next floor, trying not to fall" msgstr "" -#: gnu/packages/games.scm:1783 +#: gnu/packages/games.scm:2118 msgid "" "GNUjump is a simple, yet addictive game in which you must jump from\n" "platform to platform to avoid falling, while the platforms drop at faster rates\n" @@ -3748,11 +3985,11 @@ msgid "" "falling, themeable graphics and sounds, and replays." msgstr "" -#: gnu/packages/games.scm:1826 +#: gnu/packages/games.scm:2152 msgid "Turn-based strategy game" msgstr "" -#: gnu/packages/games.scm:1828 +#: gnu/packages/games.scm:2154 msgid "" "The Battle for Wesnoth is a fantasy, turn based tactical strategy game,\n" "with several single player campaigns, and multiplayer games (both networked and\n" @@ -3764,11 +4001,11 @@ msgid "" "next campaign." msgstr "" -#: gnu/packages/games.scm:1857 +#: gnu/packages/games.scm:2176 msgid "Dedicated @emph{Battle for Wesnoth} server" msgstr "Dedikeret @emph{Battle for Wesnoth}-server" -#: gnu/packages/games.scm:1858 +#: gnu/packages/games.scm:2177 msgid "" "This package contains a dedicated server for @emph{The\n" "Battle for Wesnoth}." @@ -3776,22 +4013,22 @@ msgstr "" "Denne pakke indeholder en dedikeret server for @emph{The\n" "Battle for Wesnoth}." -#: gnu/packages/games.scm:1899 +#: gnu/packages/games.scm:2218 msgid "Mouse and keyboard discovery for children" msgstr "" -#: gnu/packages/games.scm:1901 +#: gnu/packages/games.scm:2220 msgid "" "Gamine is a game designed for young children who are learning to use the\n" "mouse and keyboard. The child uses the mouse to draw colored dots and lines\n" "on the screen and keyboard to display letters." msgstr "" -#: gnu/packages/games.scm:1933 +#: gnu/packages/games.scm:2260 msgid "Puzzle game with a cat in lead role" msgstr "Puslespil med en kat i hovedrollen" -#: gnu/packages/games.scm:1934 +#: gnu/packages/games.scm:2261 msgid "" "Project Raincat is a game developed by Carnegie Mellon\n" "students through GCS during the Fall 2008 semester. Raincat features game\n" @@ -3800,11 +4037,11 @@ msgid "" "is programmed in Haskell." msgstr "" -#: gnu/packages/games.scm:1968 +#: gnu/packages/games.scm:2295 msgid "Client for 'The Mana World' and similar games" msgstr "" -#: gnu/packages/games.scm:1970 +#: gnu/packages/games.scm:2297 msgid "" "ManaPlus is a 2D MMORPG client for game servers. It is the only\n" "fully supported client for @uref{http://www.themanaworld.org, The mana\n" @@ -3812,11 +4049,11 @@ msgid "" "@uref{http://landoffire.org, Land of fire}." msgstr "" -#: gnu/packages/games.scm:2026 +#: gnu/packages/games.scm:2365 msgid "Transportation economics simulator" msgstr "" -#: gnu/packages/games.scm:2027 +#: gnu/packages/games.scm:2366 msgid "" "OpenTTD is a game in which you transport goods and\n" "passengers by land, water and air. It is a re-implementation of Transport\n" @@ -3826,11 +4063,11 @@ msgid "" "engine. When you start it you will be prompted to download a graphics set." msgstr "" -#: gnu/packages/games.scm:2084 +#: gnu/packages/games.scm:2423 msgid "Base graphics set for OpenTTD" msgstr "" -#: gnu/packages/games.scm:2086 +#: gnu/packages/games.scm:2425 msgid "" "The OpenGFX projects is an implementation of the OpenTTD base grahics\n" "set that aims to ensure the best possible out-of-the-box experience.\n" @@ -3845,33 +4082,49 @@ msgid "" "@end enumerate" msgstr "" -#: gnu/packages/games.scm:2131 +#: gnu/packages/games.scm:2470 msgid "Base sounds for OpenTTD" msgstr "" -#: gnu/packages/games.scm:2132 +#: gnu/packages/games.scm:2471 msgid "" "OpenSFX is a set of free base sounds for OpenTTD which make\n" "it possible to play OpenTTD without requiring the proprietary sound files from\n" "the original Transport Tycoon Deluxe." msgstr "" -#: gnu/packages/games.scm:2169 +#: gnu/packages/games.scm:2508 msgid "Music set for OpenTTD" msgstr "" -#: gnu/packages/games.scm:2170 +#: gnu/packages/games.scm:2509 msgid "" "OpenMSX is a music set for OpenTTD which makes it possible\n" "to play OpenTTD without requiring the proprietary music from the original\n" "Transport Tycoon Deluxe." msgstr "" -#: gnu/packages/games.scm:2248 +#: gnu/packages/games.scm:2578 +msgid "Title sequences for OpenRCT2" +msgstr "" + +#: gnu/packages/games.scm:2580 +msgid "openrct2-title-sequences is a set of title sequences for OpenRCT2." +msgstr "" + +#: gnu/packages/games.scm:2619 +msgid "Objects for OpenRCT2" +msgstr "" + +#: gnu/packages/games.scm:2621 +msgid "openrct2-objects is a set of objects for OpenRCT2." +msgstr "" + +#: gnu/packages/games.scm:2684 msgid "Free software re-implementation of RollerCoaster Tycoon 2" msgstr "" -#: gnu/packages/games.scm:2249 +#: gnu/packages/games.scm:2685 msgid "" "OpenRCT2 is a free software re-implementation of\n" "RollerCoaster Tycoon 2 (RCT2). The gameplay revolves around building and\n" @@ -3881,43 +4134,43 @@ msgid "" "images, etc.)" msgstr "" -#: gnu/packages/games.scm:2291 +#: gnu/packages/games.scm:2727 msgid "Pinball simulator" msgstr "Pinball-simulator" -#: gnu/packages/games.scm:2292 +#: gnu/packages/games.scm:2728 msgid "" "The Emilia Pinball Project is a pinball simulator. There\n" "are only two levels to play with, but they are very addictive." msgstr "" -#: gnu/packages/games.scm:2313 +#: gnu/packages/games.scm:2751 msgid "Board game inspired by The Settlers of Catan" msgstr "Brætspil inspireret af The Settlers of Catan" -#: gnu/packages/games.scm:2314 +#: gnu/packages/games.scm:2752 msgid "" "Pioneers is an emulation of the board game The Settlers of\n" "Catan. It can be played on a local network, on the internet, and with AI\n" "players." msgstr "" -#: gnu/packages/games.scm:2355 gnu/packages/gnome.scm:2651 +#: gnu/packages/games.scm:2793 gnu/packages/gnome.scm:2655 msgid "Logic puzzle game" msgstr "" -#: gnu/packages/games.scm:2356 +#: gnu/packages/games.scm:2794 msgid "" "The goal of this logic game is to open all cards in a 6x6\n" "grid, using a number of hints as to their relative position. The game idea\n" "is attributed to Albert Einstein." msgstr "" -#: gnu/packages/games.scm:2385 +#: gnu/packages/games.scm:2823 msgid "MUD and telnet client" msgstr "" -#: gnu/packages/games.scm:2387 +#: gnu/packages/games.scm:2825 msgid "" "POWWOW is a client software which can be used for telnet as well as for\n" "@dfn{Multi-User Dungeon} (MUD). Additionally it can serve as a nice client for\n" @@ -3925,33 +4178,33 @@ msgid "" "http://lavachat.symlynx.com/unix/" msgstr "" -#: gnu/packages/games.scm:2562 +#: gnu/packages/games.scm:3000 msgid "Arena shooter derived from the Cube 2 engine" msgstr "Arenaskydespil afledt fra Cube 2-motoren" -#: gnu/packages/games.scm:2564 +#: gnu/packages/games.scm:3002 msgid "" "Red Eclipse is an arena shooter, created from the Cube2 engine.\n" "Offering an innovative parkour system and distinct but all potent weapons,\n" "Red Eclipse provides fast paced and accessible gameplay." msgstr "" -#: gnu/packages/games.scm:2623 +#: gnu/packages/games.scm:3062 msgid "Text adventure game" msgstr "" -#: gnu/packages/games.scm:2625 +#: gnu/packages/games.scm:3064 msgid "" "Grue Hunter is a text adventure game written in Perl. You must make\n" "your way through an underground cave system in search of the Grue. Can you\n" "capture it and get out alive?" msgstr "" -#: gnu/packages/games.scm:2667 +#: gnu/packages/games.scm:3106 msgid "Old-school earthworm action game" msgstr "" -#: gnu/packages/games.scm:2669 +#: gnu/packages/games.scm:3108 msgid "" "lierolibre is an earthworm action game where you fight another player\n" "(or the computer) underground using a wide array of weapons.\n" @@ -3976,11 +4229,11 @@ msgid "" "fullscreen, use F5 or Alt+Enter." msgstr "" -#: gnu/packages/games.scm:2744 +#: gnu/packages/games.scm:3181 msgid "3D Real-time strategy and real-time tactics game" msgstr "" -#: gnu/packages/games.scm:2746 +#: gnu/packages/games.scm:3183 msgid "" "Warzone 2100 offers campaign, multi-player, and single-player skirmish\n" "modes. An extensive tech tree with over 400 different technologies, combined\n" @@ -3988,11 +4241,11 @@ msgid "" "tactics." msgstr "" -#: gnu/packages/games.scm:2779 +#: gnu/packages/games.scm:3216 msgid "2D scrolling shooter game" msgstr "2D-rullende skydespil" -#: gnu/packages/games.scm:2781 +#: gnu/packages/games.scm:3218 msgid "" "In the year 2579, the intergalactic weapons corporation, WEAPCO, has\n" "dominated the galaxy. Guide Chris Bainfield and his friend Sid Wilson on\n" @@ -4001,11 +4254,11 @@ msgid "" "in strikes against the evil corporation." msgstr "" -#: gnu/packages/games.scm:2812 +#: gnu/packages/games.scm:3249 msgid "Fast-paced, arcade-style, top-scrolling space shooter" msgstr "" -#: gnu/packages/games.scm:2814 +#: gnu/packages/games.scm:3251 msgid "" "In this game you are the captain of the cargo ship Chromium B.S.U. and\n" "are responsible for delivering supplies to the troops on the front line. Your\n" @@ -4013,11 +4266,11 @@ msgid "" "safety of the Chromium vessel." msgstr "" -#: gnu/packages/games.scm:2889 +#: gnu/packages/games.scm:3327 msgid "Drawing software for children" msgstr "" -#: gnu/packages/games.scm:2891 +#: gnu/packages/games.scm:3329 msgid "" "Tux Paint is a free drawing program designed for young children (kids\n" "ages 3 and up). It has a simple, easy-to-use interface; fun sound effects;\n" @@ -4026,40 +4279,40 @@ msgid "" "your child be creative." msgstr "" -#: gnu/packages/games.scm:2929 +#: gnu/packages/games.scm:3368 msgid "Stamp images for Tux Paint" msgstr "" -#: gnu/packages/games.scm:2931 +#: gnu/packages/games.scm:3370 msgid "" "This package contains a set of \"Rubber Stamp\" images which can be used\n" "with the \"Stamp\" tool within Tux Paint." msgstr "" -#: gnu/packages/games.scm:2978 +#: gnu/packages/games.scm:3417 msgid "Configure Tux Paint" msgstr "Konfigurer Tux Paint" -#: gnu/packages/games.scm:2980 +#: gnu/packages/games.scm:3419 msgid "Tux Paint Config is a graphical configuration editor for Tux Paint." msgstr "Tux Paint Config er et grafisk redigeringsprogram til konfigurationen for Tux Paint." -#: gnu/packages/games.scm:3012 +#: gnu/packages/games.scm:3451 msgid "2D platformer game" msgstr "2D-platformsspil" -#: gnu/packages/games.scm:3013 +#: gnu/packages/games.scm:3452 msgid "" "SuperTux is a free classic 2D jump'n run sidescroller game\n" "in a style similar to the original Super Mario games covered under\n" "the GNU GPL." msgstr "" -#: gnu/packages/games.scm:3047 +#: gnu/packages/games.scm:3486 msgid "MUD client" msgstr "MUD-klient" -#: gnu/packages/games.scm:3049 +#: gnu/packages/games.scm:3488 msgid "" "TinTin++ is a MUD client which supports MCCP (Mud Client Compression Protocol),\n" "MMCP (Mud Master Chat Protocol), xterm 256 colors, most TELNET options used by MUDs,\n" @@ -4067,11 +4320,11 @@ msgid "" "auto mapper with a VT100 map display." msgstr "" -#: gnu/packages/games.scm:3086 +#: gnu/packages/games.scm:3525 msgid "Programming game" msgstr "Programmeringsspil" -#: gnu/packages/games.scm:3087 +#: gnu/packages/games.scm:3526 msgid "" "Learn programming, playing with ants and spider webs ;-)\n" "Your robot ant can be programmed in many languages: OCaml, Python, C, C++,\n" @@ -4079,34 +4332,34 @@ msgid "" "programmers may also add their own favorite language." msgstr "" -#: gnu/packages/games.scm:3131 +#: gnu/packages/games.scm:3571 msgid "Keyboard mashing and doodling game for babies" msgstr "" -#: gnu/packages/games.scm:3132 +#: gnu/packages/games.scm:3572 msgid "" "Bambam is a simple baby keyboard (and gamepad) masher\n" "application that locks the keyboard and mouse and instead displays bright\n" "colors, pictures, and sounds." msgstr "" -#: gnu/packages/games.scm:3175 +#: gnu/packages/games.scm:3636 msgid "Arcade-style fire fighting game" msgstr "" -#: gnu/packages/games.scm:3177 +#: gnu/packages/games.scm:3638 msgid "" "Mr. Rescue is an arcade styled 2d action game centered around evacuating\n" -"civilians from burning buildings. The game features fast paced fire\n" -"extinguishing action, intense boss battles, a catchy soundtrack and lots of\n" +"civilians from burning buildings. The game features fast-paced fire\n" +"extinguishing action, intense boss battles, a catchy soundtrack, and lots of\n" "throwing people around in pseudo-randomly generated buildings." msgstr "" -#: gnu/packages/games.scm:3284 +#: gnu/packages/games.scm:3747 msgid "Non-euclidean graphical rogue-like game" msgstr "" -#: gnu/packages/games.scm:3286 +#: gnu/packages/games.scm:3749 msgid "" "HyperRogue is a game in which the player collects treasures and fights\n" "monsters -- rogue-like but for the fact that it is played on the hyperbolic\n" @@ -4120,21 +4373,21 @@ msgid "" "symbols, it still needs graphics to render the non-euclidean world." msgstr "" -#: gnu/packages/games.scm:3329 +#: gnu/packages/games.scm:3792 msgid "Shooter with space station destruction" msgstr "" -#: gnu/packages/games.scm:3331 +#: gnu/packages/games.scm:3794 msgid "" "Kobo Deluxe is an enhanced version of Akira Higuchi's XKobo graphical game\n" "for Un*x systems with X11." msgstr "" -#: gnu/packages/games.scm:3363 +#: gnu/packages/games.scm:3826 msgid "Turn based empire building strategy game" msgstr "" -#: gnu/packages/games.scm:3364 +#: gnu/packages/games.scm:3827 msgid "" "Freeciv is a turn based empire building strategy game\n" "inspired by the history of human civilization. The game commences in\n" @@ -4142,11 +4395,11 @@ msgid "" "to the Space Age." msgstr "" -#: gnu/packages/games.scm:3395 +#: gnu/packages/games.scm:3858 msgid "Recreation of data decryption effect in \"Sneakers\"" msgstr "" -#: gnu/packages/games.scm:3397 +#: gnu/packages/games.scm:3860 msgid "" "@code{No More Secrets} provides a command line tool called \"nms\"\n" "that recreates the famous data decryption effect seen on screen in the 1992\n" @@ -4157,41 +4410,41 @@ msgid "" "starting a decryption sequence to reveal the original plaintext characters." msgstr "" -#: gnu/packages/games.scm:3424 +#: gnu/packages/games.scm:3887 msgid "Data files for MegaGlest" msgstr "Datafiler for MegaClest" -#: gnu/packages/games.scm:3425 +#: gnu/packages/games.scm:3888 msgid "This package contains the data files required for MegaGlest." msgstr "Denne pakke indeholder spildataene krævet for MegaGlest." -#: gnu/packages/games.scm:3478 +#: gnu/packages/games.scm:3941 msgid "3D real-time strategy (RTS) game" msgstr "" -#: gnu/packages/games.scm:3479 +#: gnu/packages/games.scm:3942 msgid "" "MegaGlest is a cross-platform 3D real-time strategy (RTS)\n" "game, where you control the armies of one of seven different factions: Tech,\n" "Magic, Egypt, Indians, Norsemen, Persian or Romans." msgstr "" -#: gnu/packages/games.scm:3530 +#: gnu/packages/games.scm:3993 msgid "Side-scrolling physics platformer with a ball of tar" msgstr "" -#: gnu/packages/games.scm:3531 +#: gnu/packages/games.scm:3994 msgid "" "In FreeGish you control Gish, a ball of tar who lives\n" "happily with his girlfriend Brea, until one day a mysterious dark creature\n" "emerges from a sewer hole and pulls her below ground." msgstr "" -#: gnu/packages/games.scm:3570 +#: gnu/packages/games.scm:4030 msgid "Classic overhead run-and-gun game" msgstr "" -#: gnu/packages/games.scm:3571 +#: gnu/packages/games.scm:4031 msgid "" "C-Dogs SDL is a classic overhead run-and-gun game,\n" "supporting up to 4 players in co-op and deathmatch modes. Customize your\n" @@ -4199,33 +4452,33 @@ msgid "" "over 100 user-created campaigns." msgstr "" -#: gnu/packages/games.scm:3671 +#: gnu/packages/games.scm:4131 msgid "3D puzzle game" msgstr "3D-puslespil" -#: gnu/packages/games.scm:3672 +#: gnu/packages/games.scm:4132 msgid "" "Kiki the nano bot is a 3D puzzle game. It is basically a\n" "mixture of the games Sokoban and Kula-World. Your task is to help Kiki, a\n" "small robot living in the nano world, repair its maker." msgstr "" -#: gnu/packages/games.scm:3762 +#: gnu/packages/games.scm:4264 msgid "2D retro multiplayer shooter game" msgstr "2D-retro skydespil for flere spillere" -#: gnu/packages/games.scm:3763 +#: gnu/packages/games.scm:4265 msgid "" "Teeworlds is an online multiplayer game. Battle with up to\n" "16 players in a variety of game modes, including Team Deathmatch and Capture\n" "The Flag. You can even design your own maps!" msgstr "" -#: gnu/packages/games.scm:3816 +#: gnu/packages/games.scm:4318 msgid "Puzzle game with a dexterity component" msgstr "" -#: gnu/packages/games.scm:3817 +#: gnu/packages/games.scm:4319 msgid "" "Enigma is a puzzle game with 550 unique levels. The object\n" "of the game is to find and uncover pairs of identically colored ‘Oxyd’ stones.\n" @@ -4237,11 +4490,25 @@ msgid "" "with the mouse isn’t always trivial." msgstr "" -#: gnu/packages/games.scm:3888 -msgid "Puzzle game" +#: gnu/packages/games.scm:4352 +msgid "Abstract puzzle game" +msgstr "Abstrakt 3D-puslespil" + +#: gnu/packages/games.scm:4353 +msgid "" +"Chroma is an abstract puzzle game. A variety of colourful\n" +"shapes are arranged in a series of increasingly complex patterns, forming\n" +" fiendish traps that must be disarmed and mysterious puzzles that must be\n" +" manipulated in order to give up their subtle secrets. Initially so\n" +" straightforward that anyone can pick it up and begin to play, yet gradually\n" +" becoming difficult enough to tax even the brightest of minds." msgstr "" -#: gnu/packages/games.scm:3889 +#: gnu/packages/games.scm:4422 +msgid "Puzzle game" +msgstr "Puslespil" + +#: gnu/packages/games.scm:4423 msgid "" "Fish Fillets NG is strictly a puzzle game. The goal in\n" "every of the seventy levels is always the same: find a safe way out. The fish\n" @@ -4250,26 +4517,26 @@ msgid "" "fish. The whole game is accompanied by quiet, comforting music." msgstr "" -#: gnu/packages/games.scm:3953 +#: gnu/packages/games.scm:4487 msgid "Roguelike dungeon crawler game" msgstr "" -#: gnu/packages/games.scm:3954 +#: gnu/packages/games.scm:4488 msgid "" "Dungeon Crawl Stone Soup is a roguelike adventure through\n" "dungeons filled with dangerous monsters in a quest to find the mystifyingly\n" "fabulous Orb of Zot." msgstr "" -#: gnu/packages/games.scm:4000 +#: gnu/packages/games.scm:4534 msgid "Graphical roguelike dungeon crawler game" msgstr "" -#: gnu/packages/games.scm:4030 +#: gnu/packages/games.scm:4564 msgid "Cross-platform third-person action game" msgstr "" -#: gnu/packages/games.scm:4031 +#: gnu/packages/games.scm:4565 msgid "" "Lugaru is a third-person action game. The main character,\n" "Turner, is an anthropomorphic rebel bunny rabbit with impressive combat skills.\n" @@ -4279,19 +4546,19 @@ msgid "" "fight against their plot and save his fellow rabbits from slavery." msgstr "" -#: gnu/packages/games.scm:4082 +#: gnu/packages/games.scm:4615 msgid "Data files for 0ad" msgstr "" -#: gnu/packages/games.scm:4083 +#: gnu/packages/games.scm:4616 msgid "0ad-data provides the data files required by the game 0ad." msgstr "" -#: gnu/packages/games.scm:4201 +#: gnu/packages/games.scm:4734 msgid "3D real-time strategy game of ancient warfare" msgstr "" -#: gnu/packages/games.scm:4202 +#: gnu/packages/games.scm:4735 msgid "" "0 A.D. is a real-time strategy (RTS) game of ancient\n" "warfare. It's a historically-based war/economy game that allows players to\n" @@ -4301,11 +4568,11 @@ msgid "" "0ad needs a window manager that supports 'Extended Window Manager Hints'." msgstr "" -#: gnu/packages/games.scm:4277 +#: gnu/packages/games.scm:4810 msgid "Colossal Cave Adventure" msgstr "" -#: gnu/packages/games.scm:4278 +#: gnu/packages/games.scm:4811 msgid "" "The original Colossal Cave Adventure from 1976 was the\n" "origin of all text adventures, dungeon-crawl (computer) games, and\n" @@ -4314,11 +4581,11 @@ msgid "" "\"adventure 2.5\" and \"430-point adventure\"." msgstr "" -#: gnu/packages/games.scm:4289 +#: gnu/packages/games.scm:4822 msgid "Single-player, RPG roguelike game set in the world of Eyal" msgstr "" -#: gnu/packages/games.scm:4394 +#: gnu/packages/games.scm:4930 msgid "" "Tales of Maj’Eyal (ToME) RPG, featuring tactical turn-based\n" "combat and advanced character building. Play as one of many unique races and\n" @@ -4329,29 +4596,29 @@ msgid "" "Tales of Maj’Eyal offers engaging roguelike gameplay for the 21st century." msgstr "" -#: gnu/packages/games.scm:4440 +#: gnu/packages/games.scm:4976 msgid "First person shooter engine for Quake 1" msgstr "" -#: gnu/packages/games.scm:4441 +#: gnu/packages/games.scm:4977 msgid "" "Quakespasm is a modern engine for id software's Quake 1.\n" "It includes support for 64 bit CPUs, custom music playback, a new sound driver,\n" "some graphical niceities, and numerous bug-fixes and other improvements." msgstr "" -#: gnu/packages/games.scm:4490 +#: gnu/packages/games.scm:5027 msgid "" "vkquake is a modern engine for id software's Quake 1.\n" "It includes support for 64 bit CPUs, custom music playback, a new sound driver,\n" "some graphical niceities, and numerous bug-fixes and other improvements." msgstr "" -#: gnu/packages/games.scm:4541 +#: gnu/packages/games.scm:5078 msgid "First person shooter engine based on quake2" msgstr "" -#: gnu/packages/games.scm:4542 +#: gnu/packages/games.scm:5079 msgid "" "Yamagi Quake II is an enhanced client for id Software's Quake II.\n" "The main focus is an unchanged single player experience like back in 1997,\n" @@ -4361,22 +4628,30 @@ msgid "" "making Yamagi Quake II one of the most solid Quake II implementations available." msgstr "" -#: gnu/packages/games.scm:4598 +#: gnu/packages/games.scm:5107 +msgid "Sudoku for your terminal" +msgstr "" + +#: gnu/packages/games.scm:5108 +msgid "Nudoku is a ncurses-based Sudoku game for your terminal." +msgstr "" + +#: gnu/packages/games.scm:5154 msgid "Realistic physics puzzle game" msgstr "" -#: gnu/packages/games.scm:4599 +#: gnu/packages/games.scm:5155 msgid "" "The Butterfly Effect (tbe) is a game that uses\n" "realistic physics simulations to combine lots of simple mechanical\n" "elements to achieve a simple goal in the most complex way possible." msgstr "" -#: gnu/packages/games.scm:4652 +#: gnu/packages/games.scm:5206 msgid "Game of lonely space adventure" msgstr "" -#: gnu/packages/games.scm:4654 +#: gnu/packages/games.scm:5208 msgid "" "Pioneer is a space adventure game set in our galaxy at the turn of the\n" "31st century. The game is open-ended, and you are free to eke out whatever\n" @@ -4387,22 +4662,22 @@ msgid "" "whatever you make of it." msgstr "" -#: gnu/packages/games.scm:4681 +#: gnu/packages/games.scm:5235 msgid "Hacking contribution graphs in git" msgstr "" -#: gnu/packages/games.scm:4683 +#: gnu/packages/games.scm:5237 msgid "" "Badass generates false commits for a range of dates, essentially\n" "hacking the gamification of contribution graphs on platforms such as\n" "Github or Gitlab." msgstr "" -#: gnu/packages/games.scm:4761 +#: gnu/packages/games.scm:5315 msgid "Educational programming strategy game" msgstr "" -#: gnu/packages/games.scm:4762 +#: gnu/packages/games.scm:5316 msgid "" "Colobot: Gold Edition is a real-time strategy game, where\n" "you can program your units (bots) in a language called CBOT, which is similar\n" @@ -4410,11 +4685,11 @@ msgid "" "You can save humanity and get programming skills!" msgstr "" -#: gnu/packages/games.scm:4844 +#: gnu/packages/games.scm:5399 msgid "Modern Doom 2 source port" msgstr "" -#: gnu/packages/games.scm:4845 +#: gnu/packages/games.scm:5400 msgid "" "GZdoom is a port of the Doom 2 game engine, with a modern\n" "renderer. It improves modding support with ZDoom's advanced mapping features\n" @@ -4422,51 +4697,116 @@ msgid "" "Strife, Chex Quest, and fan-created games like Harmony, Hacx and Freedoom." msgstr "" -#: gnu/packages/games.scm:4906 +#: gnu/packages/games.scm:5470 msgid "The Fortune Cookie program from BSD games" msgstr "" -#: gnu/packages/games.scm:4907 +#: gnu/packages/games.scm:5471 msgid "" "Fortune is a command-line utility which displays a random\n" "quotation from a collection of quotes." msgstr "" -#: gnu/packages/gcc.scm:346 -msgid "GNU Compiler Collection" +#: gnu/packages/games.scm:5511 +msgid "Data files for Xonotic" +msgstr "Datafiler for Xonotic" + +#: gnu/packages/games.scm:5513 +msgid "Xonotic-data provides the data files required by the game Xonotic." +msgstr "Xonotic-data indeholder spildataene krævet for spillet Xonotic." + +#: gnu/packages/games.scm:5707 +msgid "Fast-paced first-person shooter game" +msgstr "Hurtigt skydespil" + +#: gnu/packages/games.scm:5709 +msgid "" +"Xonotic is a free, fast-paced first-person shooter.\n" +"The project is geared towards providing addictive arena shooter\n" +"gameplay which is all spawned and driven by the community itself.\n" +"Xonotic is a direct successor of the Nexuiz project with years of\n" +"development between them, and it aims to become the best possible\n" +"open-source FPS of its kind." +msgstr "" + +#: gnu/packages/games.scm:5759 +msgid "Portable Z-machine interpreter (ncurses version) for text adventure games" +msgstr "" + +#: gnu/packages/games.scm:5760 +msgid "" +"Frotz is an interpreter for Infocom games and other Z-machine\n" +"games in the text adventure/interactive fiction genre. This version of Frotz\n" +"complies with standard 1.0 of Graham Nelson's specification. It plays all\n" +"Z-code games V1-V8, including V6, with sound support through libao, and uses\n" +"ncurses for text display." +msgstr "" + +#: gnu/packages/games.scm:5801 +msgid "Portable Z-machine dumb interpreter for text adventure games" +msgstr "" + +#: gnu/packages/games.scm:5802 +msgid "" +"Frotz is an interpreter for Infocom games and\n" +"other Z-machine games in the text adventure/interactive fiction genre.\n" +"dfrotz is the dumb interface version. You get no screen control; everything\n" +"is just printed to the terminal line by line. The terminal handles all the\n" +"scrolling. Maybe you'd like to experience what it's like to play Adventure on\n" +"a teletype. A much cooler use for compiling Frotz with the dumb interface is\n" +"that it can be wrapped in CGI scripting, PHP, and the like to allow people\n" +"to play games on webpages. It can also be made into a chat bot." +msgstr "" + +#: gnu/packages/games.scm:5865 +msgid "Portable Z-machine interpreter (SDL port) for text adventure games" +msgstr "" + +#: gnu/packages/games.scm:5866 +msgid "" +"Frotz is an interpreter for Infocom games and other Z-machine\n" +"games in the text adventure/interactive fiction genre. This version of Frotz\n" +"using SDL fully supports all these versions of the Z-Machine including the\n" +"graphical version 6. Graphics and sound are created through the use of the SDL\n" +"libraries. AIFF sound effects and music in MOD and OGG formats are supported\n" +"when packaged in Blorb container files or optionally from individual files." msgstr "" #: gnu/packages/gcc.scm:348 +msgid "GNU Compiler Collection" +msgstr "" + +#: gnu/packages/gcc.scm:350 msgid "" "GCC is the GNU Compiler Collection. It provides compiler front-ends\n" "for several languages, including C, C++, Objective-C, Fortran, Java, Ada, and\n" "Go. It also includes runtime support libraries for these languages." msgstr "" -#: gnu/packages/gcc.scm:495 +#: gnu/packages/gcc.scm:516 msgid "" "GCC is the GNU Compiler Collection. It provides compiler front-ends\n" "for several languages, including C, C++, Objective-C, Fortran, Ada, and Go.\n" "It also includes runtime support libraries for these languages." msgstr "" -#: gnu/packages/gcc.scm:525 +#: gnu/packages/gcc.scm:561 msgid "GNU C++ standard library" msgstr "GNU C++-standardbibliotek" -#: gnu/packages/gcc.scm:560 +#: gnu/packages/gcc.scm:596 msgid "Collection of subroutines used by various GNU programs" msgstr "Samling af underrutiner brugt af diverse GNU-programmer" -#: gnu/packages/gcc.scm:745 +#: gnu/packages/gcc.scm:803 msgid "GNU libstdc++ documentation" msgstr "" -#: gnu/packages/gcc.scm:813 +#: gnu/packages/gcc.scm:873 msgid "Manipulating sets and relations of integer points bounded by linear constraints" msgstr "" -#: gnu/packages/gcc.scm:816 +#: gnu/packages/gcc.scm:876 msgid "" "isl is a library for manipulating sets and relations of integer points\n" "bounded by linear constraints. Supported operations on sets include\n" @@ -4478,11 +4818,11 @@ msgid "" "dependence analysis and bounds on piecewise step-polynomials." msgstr "" -#: gnu/packages/gcc.scm:866 +#: gnu/packages/gcc.scm:926 msgid "Library to generate code for scanning Z-polyhedra" msgstr "" -#: gnu/packages/gcc.scm:868 +#: gnu/packages/gcc.scm:928 msgid "" "CLooG is a free software library to generate code for scanning\n" "Z-polyhedra. That is, it finds a code (e.g., in C, FORTRAN...) that\n" @@ -4497,11 +4837,11 @@ msgid "" "effective code." msgstr "" -#: gnu/packages/gcc.scm:923 +#: gnu/packages/gcc.scm:983 msgid "Reference manual for the C programming language" msgstr "" -#: gnu/packages/gcc.scm:925 +#: gnu/packages/gcc.scm:985 msgid "" "This is a reference manual for the C programming language, as\n" "implemented by the GNU C Compiler (gcc). As a reference, it is not intended\n" @@ -4509,11 +4849,11 @@ msgid "" "of the language. Library functions are not included." msgstr "" -#: gnu/packages/gettext.scm:105 +#: gnu/packages/gettext.scm:109 msgid "Tools and documentation for translation (used to build other packages)" msgstr "Værktøjer og dokumentation for oversættelse (brugt til at bygge andre pakker)" -#: gnu/packages/gettext.scm:107 +#: gnu/packages/gettext.scm:111 msgid "" "GNU Gettext is a package providing a framework for translating the\n" "textual output of programs into multiple languages. It provides translators\n" @@ -4521,26 +4861,26 @@ msgid "" "translated messages from the catalogs. Nearly all GNU packages use Gettext." msgstr "" -#: gnu/packages/gettext.scm:137 +#: gnu/packages/gettext.scm:141 msgid "Tools and documentation for translation" msgstr "Værktøjer og dokumentation for oversættelse" -#: gnu/packages/gettext.scm:202 +#: gnu/packages/gettext.scm:201 msgid "Scripts to ease maintenance of translations" msgstr "" -#: gnu/packages/gettext.scm:204 +#: gnu/packages/gettext.scm:203 msgid "" "The po4a (PO for anything) project goal is to ease translations (and\n" "more interestingly, the maintenance of translations) using gettext tools on\n" "areas where they were not expected like documentation." msgstr "" -#: gnu/packages/gimp.scm:64 +#: gnu/packages/gimp.scm:69 msgid "Image pixel format conversion library" msgstr "" -#: gnu/packages/gimp.scm:66 +#: gnu/packages/gimp.scm:71 msgid "" "Babl is a dynamic, any-to-any pixel format translation library.\n" "It allows converting between different methods of storing pixels, known as\n" @@ -4551,22 +4891,22 @@ msgid "" "provided, as well as a framework to add new color models and data types." msgstr "" -#: gnu/packages/gimp.scm:123 +#: gnu/packages/gimp.scm:110 msgid "Graph based image processing framework" msgstr "Grafbaseret billedbehandlingsramme" -#: gnu/packages/gimp.scm:124 +#: gnu/packages/gimp.scm:111 msgid "" "GEGL (Generic Graphics Library) provides infrastructure to\n" "do demand based cached non destructive image editing on larger than RAM\n" "buffers." msgstr "" -#: gnu/packages/gimp.scm:189 +#: gnu/packages/gimp.scm:180 msgid "GNU Image Manipulation Program" msgstr "" -#: gnu/packages/gimp.scm:191 +#: gnu/packages/gimp.scm:182 msgid "" "GIMP is an application for image manipulation tasks such as photo\n" "retouching, composition and authoring. It supports all common image formats\n" @@ -4574,11 +4914,11 @@ msgid "" "that is extensible via a plugin system." msgstr "" -#: gnu/packages/gimp.scm:239 +#: gnu/packages/gimp.scm:242 msgid "GIMP plug-in to edit image in fourier space" msgstr "" -#: gnu/packages/gimp.scm:241 +#: gnu/packages/gimp.scm:244 msgid "" "This package provides a simple plug-in to apply the fourier transform on\n" "an image, allowing you to work with the transformed image inside GIMP. You\n" @@ -4586,33 +4926,67 @@ msgid "" "inverse fourier transform." msgstr "" -#: gnu/packages/gnome.scm:202 +#: gnu/packages/gimp.scm:272 +msgid "Artistic brushes library" +msgstr "" + +#: gnu/packages/gimp.scm:273 +msgid "" +"Libmypaint, also called \"brushlib\", is a library for making\n" +"brushstrokes which is used by MyPaint and GIMP." +msgstr "" + +#: gnu/packages/gimp.scm:304 +msgid "Default brushes for MyPaint" +msgstr "Standardpensler for MyPaint" + +#: gnu/packages/gimp.scm:305 +msgid "" +"This package provides the default set of brushes for\n" +"MyPaint." +msgstr "" +"Denne pakke indeholder standardsættet for pensler for\n" +"MyPaint." + +#: gnu/packages/gimp.scm:366 +msgid "GIMP plugins for texture synthesis" +msgstr "" + +#: gnu/packages/gimp.scm:368 +msgid "" +"This package provides resynthesizer plugins for GIMP, which encompasses\n" +"tools for healing selections (content-aware fill), enlarging the canvas and\n" +"healing the border, increasing the resolution while adding detail, and\n" +"transfering the style of an image." +msgstr "" + +#: gnu/packages/gnome.scm:208 msgid "CD/DVD burning tool for Gnome" msgstr "Cd/dvd-brændeværktøj for GNOME" -#: gnu/packages/gnome.scm:203 +#: gnu/packages/gnome.scm:209 msgid "" "Brasero is an application to burn CD/DVD for the Gnome\n" "Desktop. It is designed to be as simple as possible and has some unique\n" "features to enable users to create their discs easily and quickly." msgstr "" -#: gnu/packages/gnome.scm:278 +#: gnu/packages/gnome.scm:284 msgid "Simple backup tool, for regular encrypted backups" msgstr "" -#: gnu/packages/gnome.scm:280 +#: gnu/packages/gnome.scm:286 msgid "" "Déjà Dup is a simple backup tool, for regular encrypted backups. It\n" "uses duplicity as the backend, which supports incremental backups and storage\n" "either on a local, or remote machine via a number of methods." msgstr "" -#: gnu/packages/gnome.scm:327 +#: gnu/packages/gnome.scm:333 msgid "Diagram creation for GNOME" msgstr "Diagramoprettelse for GNOME" -#: gnu/packages/gnome.scm:328 +#: gnu/packages/gnome.scm:334 msgid "" "Dia can be used to draw different types of diagrams, and\n" "includes support for UML static structure diagrams (class diagrams), entity\n" @@ -4620,33 +4994,33 @@ msgid "" "formats like PNG, SVG, PDF and EPS." msgstr "" -#: gnu/packages/gnome.scm:384 +#: gnu/packages/gnome.scm:390 msgid "Library for accessing online service APIs" msgstr "Bibliotek til at tilgå API'er for nettjenester" -#: gnu/packages/gnome.scm:386 +#: gnu/packages/gnome.scm:392 msgid "" "libgdata is a GLib-based library for accessing online service APIs using\n" "the GData protocol — most notably, Google's services. It provides APIs to\n" "access the common Google services, and has full asynchronous support." msgstr "" -#: gnu/packages/gnome.scm:417 +#: gnu/packages/gnome.scm:425 msgid "GObject-based library for handling and rendering XPS documents" msgstr "GObject-baseret bibliotek til at håndtere og optegne XPS-dokumenter" -#: gnu/packages/gnome.scm:419 +#: gnu/packages/gnome.scm:427 msgid "" "libgxps is a GObject-based library for handling and rendering XPS\n" "documents. This package also contains binaries that can convert XPS documents\n" "to other formats." msgstr "" -#: gnu/packages/gnome.scm:439 +#: gnu/packages/gnome.scm:447 msgid "Bootstrap GNOME modules built from Git" msgstr "Bootstrap GNOME-moduler kompileret fra Git" -#: gnu/packages/gnome.scm:440 +#: gnu/packages/gnome.scm:448 msgid "" "gnome-common contains various files needed to bootstrap\n" "GNOME modules built from Git. It contains a common \"autogen.sh\" script that\n" @@ -4654,11 +5028,11 @@ msgid "" "commonly used macros." msgstr "" -#: gnu/packages/gnome.scm:491 +#: gnu/packages/gnome.scm:499 msgid "Libgnome-desktop, gnome-about, and desktop-wide documents" msgstr "" -#: gnu/packages/gnome.scm:493 +#: gnu/packages/gnome.scm:501 msgid "" "The libgnome-desktop library provides API shared by several applications\n" "on the desktop, but that cannot live in the platform for various reasons.\n" @@ -4668,49 +5042,49 @@ msgid "" "The gnome-about program helps find which version of GNOME is installed." msgstr "" -#: gnu/packages/gnome.scm:526 +#: gnu/packages/gnome.scm:534 msgid "Documentation utilities for the Gnome project" msgstr "Dokumentationsredskaber for GNOME-projektet" -#: gnu/packages/gnome.scm:528 +#: gnu/packages/gnome.scm:536 msgid "" "Gnome-doc-utils is a collection of documentation utilities for the\n" "Gnome project. It includes xml2po tool which makes it easier to translate\n" "and keep up to date translations of documentation." msgstr "" -#: gnu/packages/gnome.scm:567 +#: gnu/packages/gnome.scm:575 msgid "Disk management utility for GNOME" msgstr "Diskhåndteringsredskab for GNOME" -#: gnu/packages/gnome.scm:568 +#: gnu/packages/gnome.scm:576 msgid "Disk management utility for GNOME." msgstr "Diskhåndteringsredskab for GNOME." -#: gnu/packages/gnome.scm:611 +#: gnu/packages/gnome.scm:619 msgid "Libraries for displaying certificates and accessing key stores" msgstr "Biblioteker til at vise certifikater og tilgå nøglelagre" -#: gnu/packages/gnome.scm:613 +#: gnu/packages/gnome.scm:621 msgid "" "The GCR package contains libraries used for displaying certificates and\n" "accessing key stores. It also provides the viewer for crypto files on the\n" "GNOME Desktop." msgstr "" -#: gnu/packages/gnome.scm:642 +#: gnu/packages/gnome.scm:650 msgid "Accessing passwords from the GNOME keyring" msgstr "" -#: gnu/packages/gnome.scm:644 +#: gnu/packages/gnome.scm:652 msgid "Client library to access passwords from the GNOME keyring." msgstr "" -#: gnu/packages/gnome.scm:714 +#: gnu/packages/gnome.scm:722 msgid "Daemon to store passwords and encryption keys" msgstr "Dæmon til at lagre adgandskoder og krypteringsnøgler" -#: gnu/packages/gnome.scm:716 +#: gnu/packages/gnome.scm:724 msgid "" "gnome-keyring is a program that keeps passwords and other secrets for\n" "users. It is run as a daemon in the session, similar to ssh-agent, and other\n" @@ -4721,11 +5095,11 @@ msgid "" "forgotten when the session ends." msgstr "" -#: gnu/packages/gnome.scm:790 +#: gnu/packages/gnome.scm:798 msgid "GNOME's document viewer" msgstr "" -#: gnu/packages/gnome.scm:792 +#: gnu/packages/gnome.scm:800 msgid "" "Evince is a document viewer for multiple document formats. It\n" "currently supports PDF, PostScript, DjVu, TIFF and DVI. The goal\n" @@ -4733,40 +5107,40 @@ msgid "" "on the GNOME Desktop with a single simple application." msgstr "" -#: gnu/packages/gnome.scm:821 +#: gnu/packages/gnome.scm:829 msgid "GNOME settings for various desktop components" msgstr "" -#: gnu/packages/gnome.scm:823 +#: gnu/packages/gnome.scm:831 msgid "" "Gsettings-desktop-schemas contains a collection of GSettings schemas\n" "for settings shared by various components of the GNOME desktop." msgstr "" -#: gnu/packages/gnome.scm:857 +#: gnu/packages/gnome.scm:865 msgid "Utility to implement the Freedesktop Icon Naming Specification" msgstr "" -#: gnu/packages/gnome.scm:859 +#: gnu/packages/gnome.scm:867 msgid "" "To help with the transition to the Freedesktop Icon Naming\n" "Specification, the icon naming utility maps the icon names used by the\n" "GNOME and KDE desktops to the icon names proposed in the specification." msgstr "" -#: gnu/packages/gnome.scm:890 +#: gnu/packages/gnome.scm:898 msgid "GNOME icon theme" msgstr "GNOME-ikontema" -#: gnu/packages/gnome.scm:892 +#: gnu/packages/gnome.scm:900 msgid "Icons for the GNOME desktop." msgstr "Ikoner for GNOME-skrivebordet." -#: gnu/packages/gnome.scm:929 +#: gnu/packages/gnome.scm:937 msgid "Tango icon theme" msgstr "Tango-ikontema" -#: gnu/packages/gnome.scm:930 +#: gnu/packages/gnome.scm:938 msgid "" "This is an icon theme that follows the Tango visual\n" "guidelines." @@ -4774,11 +5148,11 @@ msgstr "" "Dette er et ikontema, som følger de visuelle\n" "retningslinjer fra Tango." -#: gnu/packages/gnome.scm:956 +#: gnu/packages/gnome.scm:964 msgid "Database of common MIME types" msgstr "Database med gængse MIME-typer" -#: gnu/packages/gnome.scm:958 +#: gnu/packages/gnome.scm:966 msgid "" "The shared-mime-info package contains the core database of common types\n" "and the update-mime-database command used to extend it. It requires glib2 to\n" @@ -4787,19 +5161,19 @@ msgid "" "database is translated at Transifex." msgstr "" -#: gnu/packages/gnome.scm:982 +#: gnu/packages/gnome.scm:990 msgid "Freedesktop icon theme" msgstr "Freedesktop-ikontema" -#: gnu/packages/gnome.scm:984 +#: gnu/packages/gnome.scm:992 msgid "Freedesktop icon theme." msgstr "Freedesktop-ikondtema." -#: gnu/packages/gnome.scm:1012 +#: gnu/packages/gnome.scm:1020 msgid "GNOME desktop notification library" msgstr "" -#: gnu/packages/gnome.scm:1014 +#: gnu/packages/gnome.scm:1022 msgid "" "Libnotify is a library that sends desktop notifications to a\n" "notification daemon, as defined in the Desktop Notifications spec. These\n" @@ -4807,11 +5181,11 @@ msgid "" "some form of information without getting in the user's way." msgstr "" -#: gnu/packages/gnome.scm:1048 +#: gnu/packages/gnome.scm:1056 msgid "GObject plugin system" msgstr "" -#: gnu/packages/gnome.scm:1050 +#: gnu/packages/gnome.scm:1058 msgid "" "Libpeas is a gobject-based plugin engine, targeted at giving every\n" "application the chance to assume its own extensibility. It also has a set of\n" @@ -4820,33 +5194,33 @@ msgid "" "API." msgstr "" -#: gnu/packages/gnome.scm:1079 +#: gnu/packages/gnome.scm:1097 msgid "OpenGL extension to GTK+" msgstr "OpenGL-udvidelse til GTK+" -#: gnu/packages/gnome.scm:1080 +#: gnu/packages/gnome.scm:1098 msgid "" "GtkGLExt is an OpenGL extension to GTK+. It provides\n" "additional GDK objects which support OpenGL rendering in GTK+ and GtkWidget\n" "API add-ons to make GTK+ widgets OpenGL-capable." msgstr "" -#: gnu/packages/gnome.scm:1123 +#: gnu/packages/gnome.scm:1141 msgid "GTK+ rapid application development tool" msgstr "" -#: gnu/packages/gnome.scm:1124 +#: gnu/packages/gnome.scm:1142 msgid "" "Glade is a rapid application development (RAD) tool to\n" "enable quick & easy development of user interfaces for the GTK+ toolkit and\n" "the GNOME desktop environment." msgstr "" -#: gnu/packages/gnome.scm:1152 +#: gnu/packages/gnome.scm:1170 msgid "CSS2 parsing and manipulation library" msgstr "CSS2-fortolknings- og manipuleringsbibliotek" -#: gnu/packages/gnome.scm:1154 +#: gnu/packages/gnome.scm:1172 msgid "" "Libcroco is a standalone CSS2 parsing and manipulation library.\n" "The parser provides a low level event driven SAC-like API and a CSS object\n" @@ -4854,31 +5228,31 @@ msgid "" "XML/CSS rendering engine." msgstr "" -#: gnu/packages/gnome.scm:1187 +#: gnu/packages/gnome.scm:1205 msgid "GNOME's Structured File Library" msgstr "" -#: gnu/packages/gnome.scm:1189 +#: gnu/packages/gnome.scm:1207 msgid "" "Libgsf aims to provide an efficient extensible I/O abstraction for\n" "dealing with different structured file formats." msgstr "" -#: gnu/packages/gnome.scm:1254 +#: gnu/packages/gnome.scm:1272 msgid "Render SVG files using Cairo" msgstr "" -#: gnu/packages/gnome.scm:1256 +#: gnu/packages/gnome.scm:1274 msgid "" "Librsvg is a C library to render SVG files using the Cairo 2D graphics\n" "library." msgstr "" -#: gnu/packages/gnome.scm:1280 +#: gnu/packages/gnome.scm:1298 msgid "Create trees of CORBA Interface Definition Language files" msgstr "" -#: gnu/packages/gnome.scm:1281 +#: gnu/packages/gnome.scm:1299 msgid "" "Libidl is a library for creating trees of CORBA Interface\n" "Definition Language (idl) files, which is a specification for defining\n" @@ -4887,144 +5261,144 @@ msgid "" "functionality was designed to be as reusable and portable as possible." msgstr "" -#: gnu/packages/gnome.scm:1321 +#: gnu/packages/gnome.scm:1339 msgid "CORBA 2.4-compliant Object Request Broker" msgstr "" -#: gnu/packages/gnome.scm:1322 +#: gnu/packages/gnome.scm:1340 msgid "" "ORBit2 is a CORBA 2.4-compliant Object Request Broker (orb)\n" "featuring mature C, C++ and Python bindings." msgstr "" -#: gnu/packages/gnome.scm:1369 +#: gnu/packages/gnome.scm:1387 msgid "Framework for creating reusable components for use in GNOME applications" msgstr "" -#: gnu/packages/gnome.scm:1370 +#: gnu/packages/gnome.scm:1388 msgid "" "Bonobo is a framework for creating reusable components for\n" "use in GNOME applications, built on top of CORBA." msgstr "" -#: gnu/packages/gnome.scm:1401 +#: gnu/packages/gnome.scm:1419 msgid "Store application preferences" msgstr "" -#: gnu/packages/gnome.scm:1402 +#: gnu/packages/gnome.scm:1420 msgid "" "Gconf is a system for storing application preferences. It\n" "is intended for user preferences; not arbitrary data storage." msgstr "" -#: gnu/packages/gnome.scm:1436 +#: gnu/packages/gnome.scm:1454 msgid "Base MIME and Application database for GNOME" msgstr "" -#: gnu/packages/gnome.scm:1437 +#: gnu/packages/gnome.scm:1455 msgid "" "GNOME Mime Data is a module which contains the base MIME\n" "and Application database for GNOME. The data stored by this module is\n" "designed to be accessed through the MIME functions in GnomeVFS." msgstr "" -#: gnu/packages/gnome.scm:1480 +#: gnu/packages/gnome.scm:1498 msgid "Access files and folders in GNOME applications" msgstr "" -#: gnu/packages/gnome.scm:1482 +#: gnu/packages/gnome.scm:1500 msgid "" "GnomeVFS is the core library used to access files and folders in GNOME\n" "applications. It provides a file system abstraction which allows applications\n" "to access local and remote files with a single consistent API." msgstr "" -#: gnu/packages/gnome.scm:1527 +#: gnu/packages/gnome.scm:1545 msgid "Useful routines for building applications" msgstr "" -#: gnu/packages/gnome.scm:1528 +#: gnu/packages/gnome.scm:1546 msgid "" "The libgnome library provides a number of useful routines\n" "for building modern applications, including session management, activation of\n" "files and URIs, and displaying help." msgstr "" -#: gnu/packages/gnome.scm:1551 +#: gnu/packages/gnome.scm:1569 msgid "2D drawing library" msgstr "2D-tegnebibliotek" -#: gnu/packages/gnome.scm:1552 +#: gnu/packages/gnome.scm:1570 msgid "" "Libart is a 2D drawing library intended as a\n" "high-quality vector-based 2D library with antialiasing and alpha composition." msgstr "" -#: gnu/packages/gnome.scm:1579 +#: gnu/packages/gnome.scm:1597 msgid "Flexible widget for creating interactive structured graphics" msgstr "" -#: gnu/packages/gnome.scm:1580 +#: gnu/packages/gnome.scm:1598 msgid "" "The GnomeCanvas widget provides a flexible widget for\n" "creating interactive structured graphics." msgstr "" -#: gnu/packages/gnome.scm:1604 +#: gnu/packages/gnome.scm:1622 msgid "C++ bindings to the GNOME Canvas library" msgstr "" -#: gnu/packages/gnome.scm:1605 +#: gnu/packages/gnome.scm:1623 msgid "C++ bindings to the GNOME Canvas library." msgstr "" -#: gnu/packages/gnome.scm:1637 +#: gnu/packages/gnome.scm:1655 msgid "Additional widgets for applications" msgstr "" -#: gnu/packages/gnome.scm:1638 +#: gnu/packages/gnome.scm:1656 msgid "" "The libgnomeui library provides additional widgets for\n" "applications. Many of the widgets from libgnomeui have already been\n" "ported to GTK+." msgstr "" -#: gnu/packages/gnome.scm:1664 +#: gnu/packages/gnome.scm:1682 msgid "Load glade interfaces and access the glade built widgets" msgstr "" -#: gnu/packages/gnome.scm:1665 +#: gnu/packages/gnome.scm:1683 msgid "" "Libglade is a library that provides interfaces for loading\n" "graphical interfaces described in glade files and for accessing the\n" "widgets built in the loading process." msgstr "" -#: gnu/packages/gnome.scm:1695 gnu/packages/gnome.scm:1727 +#: gnu/packages/gnome.scm:1713 gnu/packages/gnome.scm:1745 msgid "Printing framework for GNOME" msgstr "" -#: gnu/packages/gnome.scm:1697 +#: gnu/packages/gnome.scm:1715 msgid "" "GNOME-print was a printing framework for GNOME. It has been deprecated\n" "since ca. 2006, when GTK+ itself incorporated printing support." msgstr "" -#: gnu/packages/gnome.scm:1771 +#: gnu/packages/gnome.scm:1789 msgid "Some user interface controls using Bonobo" msgstr "" -#: gnu/packages/gnome.scm:1772 +#: gnu/packages/gnome.scm:1790 msgid "" "The Bonobo UI library provides a number of user interface\n" "controls using the Bonobo component framework." msgstr "" -#: gnu/packages/gnome.scm:1797 +#: gnu/packages/gnome.scm:1815 msgid "Window Navigator Construction Kit" msgstr "" -#: gnu/packages/gnome.scm:1799 +#: gnu/packages/gnome.scm:1817 msgid "" "Libwnck is the Window Navigator Construction Kit, a library for use in\n" "writing pagers, tasklists, and more generally applications that are dealing\n" @@ -5032,19 +5406,19 @@ msgid "" "Hints specification (EWMH)." msgstr "" -#: gnu/packages/gnome.scm:1852 +#: gnu/packages/gnome.scm:1870 msgid "Document-centric objects and utilities" msgstr "" -#: gnu/packages/gnome.scm:1853 +#: gnu/packages/gnome.scm:1871 msgid "A GLib/GTK+ set of document-centric objects and utilities." msgstr "" -#: gnu/packages/gnome.scm:1937 +#: gnu/packages/gnome.scm:1955 msgid "Spreadsheet application" msgstr "" -#: gnu/packages/gnome.scm:1939 +#: gnu/packages/gnome.scm:1957 msgid "" "GNUmeric is a GNU spreadsheet application, running under GNOME. It is\n" "interoperable with other spreadsheet applications. It has a vast array of\n" @@ -5053,29 +5427,29 @@ msgid "" "engineering." msgstr "" -#: gnu/packages/gnome.scm:1979 +#: gnu/packages/gnome.scm:1997 msgid "Default GNOME 3 themes" msgstr "Standardtemaer for GNOME 3" -#: gnu/packages/gnome.scm:1981 +#: gnu/packages/gnome.scm:1999 msgid "The default GNOME 3 themes (Adwaita and some accessibility themes)." msgstr "" -#: gnu/packages/gnome.scm:2014 +#: gnu/packages/gnome.scm:2032 msgid "Manage encryption keys and passwords in the GNOME keyring" msgstr "Håndter krypteringsnøgler og adgangskoder i GNOME keyring" -#: gnu/packages/gnome.scm:2016 +#: gnu/packages/gnome.scm:2034 msgid "" "Seahorse is a GNOME application for managing encryption keys and\n" "passwords in the GNOME keyring." msgstr "" -#: gnu/packages/gnome.scm:2054 gnu/packages/gnome.scm:2292 +#: gnu/packages/gnome.scm:2072 gnu/packages/gnome.scm:2296 msgid "Compiler for the GObject type system" msgstr "" -#: gnu/packages/gnome.scm:2056 +#: gnu/packages/gnome.scm:2074 msgid "" "Vala is a programming language that aims to bring modern programming\n" "language features to GNOME developers without imposing any additional runtime\n" @@ -5083,11 +5457,11 @@ msgid "" "libraries written in C." msgstr "" -#: gnu/packages/gnome.scm:2088 +#: gnu/packages/gnome.scm:2106 msgid "Virtual Terminal Emulator" msgstr "" -#: gnu/packages/gnome.scm:2090 +#: gnu/packages/gnome.scm:2108 msgid "" "VTE is a library (libvte) implementing a terminal emulator widget for\n" "GTK+, and a minimal sample application (vte) using that. Vte is mainly used in\n" @@ -5095,39 +5469,39 @@ msgid "" "editors, IDEs, etc." msgstr "" -#: gnu/packages/gnome.scm:2123 +#: gnu/packages/gnome.scm:2140 msgid "Enhanced VTE terminal widget" msgstr "" -#: gnu/packages/gnome.scm:2125 +#: gnu/packages/gnome.scm:2142 msgid "" "VTE is a library (libvte) implementing a terminal emulator widget for\n" "GTK+, this fork provides additional functions exposed for keyboard text\n" "selection and URL hints." msgstr "" -#: gnu/packages/gnome.scm:2211 +#: gnu/packages/gnome.scm:2228 msgid "Remote desktop viewer for GNOME" msgstr "" -#: gnu/packages/gnome.scm:2212 +#: gnu/packages/gnome.scm:2229 msgid "" "Vinagre is a remote display client supporting the VNC, SPICE\n" "and RDP protocols." msgstr "" -#: gnu/packages/gnome.scm:2264 +#: gnu/packages/gnome.scm:2268 msgid "Low-level GNOME configuration system" msgstr "" -#: gnu/packages/gnome.scm:2265 +#: gnu/packages/gnome.scm:2269 msgid "" "Dconf is a low-level configuration system. Its main purpose\n" "is to provide a backend to GSettings on platforms that don't already have\n" "configuration storage systems." msgstr "" -#: gnu/packages/gnome.scm:2294 +#: gnu/packages/gnome.scm:2298 msgid "" "JSON-GLib is a C library based on GLib providing serialization and\n" "deserialization support for the JavaScript Object Notation (JSON) format\n" @@ -5136,11 +5510,11 @@ msgid "" "and objects." msgstr "" -#: gnu/packages/gnome.scm:2333 +#: gnu/packages/gnome.scm:2337 msgid "High-level API for X Keyboard Extension" msgstr "" -#: gnu/packages/gnome.scm:2335 +#: gnu/packages/gnome.scm:2339 msgid "" "LibXklavier is a library providing high-level API for X Keyboard\n" "Extension known as XKB. This library is intended to support XFree86 and other\n" @@ -5148,58 +5522,58 @@ msgid "" "indicators etc)." msgstr "" -#: gnu/packages/gnome.scm:2363 +#: gnu/packages/gnome.scm:2367 msgid "Python bindings to librsvg" msgstr "" -#: gnu/packages/gnome.scm:2365 +#: gnu/packages/gnome.scm:2369 msgid "" "This packages provides Python bindings to librsvg, the SVG rendering\n" "library." msgstr "" -#: gnu/packages/gnome.scm:2415 +#: gnu/packages/gnome.scm:2419 msgid "Network-related GIO modules" msgstr "" -#: gnu/packages/gnome.scm:2417 +#: gnu/packages/gnome.scm:2421 msgid "" "This package contains various network related extensions for the GIO\n" "library." msgstr "" -#: gnu/packages/gnome.scm:2448 +#: gnu/packages/gnome.scm:2452 msgid "RESTful web api query library" msgstr "" -#: gnu/packages/gnome.scm:2450 +#: gnu/packages/gnome.scm:2454 msgid "" "This library was designed to make it easier to access web services that\n" "claim to be \"RESTful\". It includes convenience wrappers for libsoup and\n" "libxml to ease remote use of the RESTful API." msgstr "" -#: gnu/packages/gnome.scm:2573 +#: gnu/packages/gnome.scm:2577 msgid "GLib-based HTTP Library" msgstr "" -#: gnu/packages/gnome.scm:2575 +#: gnu/packages/gnome.scm:2579 msgid "" "LibSoup is an HTTP client/server library for GNOME. It uses GObjects\n" "and the GLib main loop, to integrate well with GNOME applications." msgstr "" -#: gnu/packages/gnome.scm:2621 +#: gnu/packages/gnome.scm:2625 msgid "GObject bindings for \"Secret Service\" API" msgstr "GObject-bindinger for »Secret Service«-API'en" -#: gnu/packages/gnome.scm:2623 +#: gnu/packages/gnome.scm:2627 msgid "" "Libsecret is a GObject based library for storing and retrieving passwords\n" "and other secrets. It communicates with the \"Secret Service\" using DBus." msgstr "" -#: gnu/packages/gnome.scm:2652 +#: gnu/packages/gnome.scm:2656 msgid "" "Five or More is a game where you try to align\n" " five or more objects of the same color and shape causing them to disappear.\n" @@ -5207,21 +5581,21 @@ msgid "" " Try to last as long as possible." msgstr "" -#: gnu/packages/gnome.scm:2690 +#: gnu/packages/gnome.scm:2694 msgid "Minesweeper game" msgstr "Minestrygerspil" -#: gnu/packages/gnome.scm:2692 +#: gnu/packages/gnome.scm:2696 msgid "" "Mines (previously gnomine) is a puzzle game where you locate mines\n" "floating in an ocean using only your brain and a little bit of luck." msgstr "" -#: gnu/packages/gnome.scm:2723 +#: gnu/packages/gnome.scm:2727 msgid "Japanese logic game" msgstr "" -#: gnu/packages/gnome.scm:2725 +#: gnu/packages/gnome.scm:2729 msgid "" "Sudoku is a Japanese logic game that exploded in popularity in 2005.\n" "GNOME Sudoku is meant to have an interface as simple and unobstrusive as\n" @@ -5229,11 +5603,11 @@ msgid "" "more fun." msgstr "" -#: gnu/packages/gnome.scm:2771 +#: gnu/packages/gnome.scm:2775 msgid "Terminal emulator" msgstr "Terminalemulator" -#: gnu/packages/gnome.scm:2773 +#: gnu/packages/gnome.scm:2777 msgid "" "GNOME Terminal is a terminal emulator application for accessing a\n" "UNIX shell environment which can be used to run programs available on\n" @@ -5243,22 +5617,22 @@ msgid "" "keyboard shortcuts." msgstr "" -#: gnu/packages/gnome.scm:2839 +#: gnu/packages/gnome.scm:2843 msgid "Color management service" msgstr "" -#: gnu/packages/gnome.scm:2840 +#: gnu/packages/gnome.scm:2844 msgid "" "Colord is a system service that makes it easy to manage,\n" "install and generate color profiles to accurately color manage input and\n" "output devices." msgstr "" -#: gnu/packages/gnome.scm:2884 +#: gnu/packages/gnome.scm:2889 msgid "Geolocation service" msgstr "" -#: gnu/packages/gnome.scm:2885 +#: gnu/packages/gnome.scm:2890 msgid "" "Geoclue is a D-Bus service that provides location\n" "information. The primary goal of the Geoclue project is to make creating\n" @@ -5267,11 +5641,11 @@ msgid "" "permission from user." msgstr "" -#: gnu/packages/gnome.scm:2920 +#: gnu/packages/gnome.scm:2925 msgid "Geocoding and reverse-geocoding library" msgstr "" -#: gnu/packages/gnome.scm:2922 +#: gnu/packages/gnome.scm:2927 msgid "" "geocode-glib is a convenience library for geocoding (finding longitude,\n" "and latitude from an address) and reverse geocoding (finding an address from\n" @@ -5279,11 +5653,11 @@ msgid "" "faster results and to avoid unnecessary server load." msgstr "" -#: gnu/packages/gnome.scm:2975 +#: gnu/packages/gnome.scm:2974 msgid "System daemon for managing power devices" msgstr "Systemdæmon til håndtering af strømenheder" -#: gnu/packages/gnome.scm:2977 +#: gnu/packages/gnome.scm:2976 msgid "" "UPower is an abstraction for enumerating power devices,\n" "listening to device events and querying history and statistics. Any\n" @@ -5291,21 +5665,21 @@ msgid "" "service via the system message bus." msgstr "" -#: gnu/packages/gnome.scm:3035 +#: gnu/packages/gnome.scm:3034 msgid "Location, time zone, and weather library for GNOME" msgstr "" -#: gnu/packages/gnome.scm:3037 +#: gnu/packages/gnome.scm:3036 msgid "" "libgweather is a library to access weather information from online\n" "services for numerous locations." msgstr "" -#: gnu/packages/gnome.scm:3088 +#: gnu/packages/gnome.scm:3087 msgid "GNOME settings daemon" msgstr "" -#: gnu/packages/gnome.scm:3090 +#: gnu/packages/gnome.scm:3089 msgid "" "This package contains the daemon responsible for setting the various\n" "parameters of a GNOME session and the applications that run under it. It\n" @@ -5313,42 +5687,42 @@ msgid "" "settings, themes, mouse settings, and startup of other daemons." msgstr "" -#: gnu/packages/gnome.scm:3127 +#: gnu/packages/gnome.scm:3126 msgid "Library to parse and save media playlists for GNOME" msgstr "" -#: gnu/packages/gnome.scm:3128 +#: gnu/packages/gnome.scm:3127 msgid "" "Totem-pl-parser is a GObjects-based library to parse and save\n" "playlists in a variety of formats." msgstr "" -#: gnu/packages/gnome.scm:3162 +#: gnu/packages/gnome.scm:3161 msgid "Solitaire card games" msgstr "" -#: gnu/packages/gnome.scm:3164 +#: gnu/packages/gnome.scm:3163 msgid "" "Aisleriot (also known as Solitaire or sol) is a collection of card games\n" "which are easy to play with the aid of a mouse." msgstr "" -#: gnu/packages/gnome.scm:3188 +#: gnu/packages/gnome.scm:3187 msgid "API documentation browser for GNOME" msgstr "" -#: gnu/packages/gnome.scm:3190 +#: gnu/packages/gnome.scm:3189 msgid "" "Devhelp is an API documentation browser for GTK+ and GNOME. It works\n" "natively with GTK-Doc (the API reference system developed for GTK+ and used\n" "throughout GNOME for API documentation)." msgstr "" -#: gnu/packages/gnome.scm:3257 +#: gnu/packages/gnome.scm:3256 msgid "Object oriented GL/GLES Abstraction/Utility Layer" msgstr "" -#: gnu/packages/gnome.scm:3259 +#: gnu/packages/gnome.scm:3258 msgid "" "Cogl is a small library for using 3D graphics hardware to draw pretty\n" "pictures. The API departs from the flat state machine style of OpenGL and is\n" @@ -5356,26 +5730,26 @@ msgid "" "without stepping on each others toes." msgstr "" -#: gnu/packages/gnome.scm:3316 +#: gnu/packages/gnome.scm:3315 msgid "Open GL based interactive canvas library" msgstr "" -#: gnu/packages/gnome.scm:3318 gnu/packages/gnome.scm:3347 +#: gnu/packages/gnome.scm:3317 gnu/packages/gnome.scm:3346 msgid "" "Clutter is an Open GL based interactive canvas library, designed for\n" "creating fast, mainly 2D single window applications such as media box UIs,\n" "presentations, kiosk style applications and so on." msgstr "" -#: gnu/packages/gnome.scm:3345 +#: gnu/packages/gnome.scm:3344 msgid "Open GL based interactive canvas library GTK+ widget" msgstr "" -#: gnu/packages/gnome.scm:3375 +#: gnu/packages/gnome.scm:3374 msgid "Integration library for using GStreamer with Clutter" msgstr "" -#: gnu/packages/gnome.scm:3377 +#: gnu/packages/gnome.scm:3376 msgid "" "Clutter-Gst is an integration library for using GStreamer with Clutter.\n" "It provides a GStreamer sink to upload frames to GL and an actor that\n" @@ -5383,11 +5757,11 @@ msgid "" "GL based interactive canvas library." msgstr "" -#: gnu/packages/gnome.scm:3411 +#: gnu/packages/gnome.scm:3410 msgid "C library providing a ClutterActor to display maps" msgstr "" -#: gnu/packages/gnome.scm:3413 +#: gnu/packages/gnome.scm:3412 msgid "" "libchamplain is a C library providing a ClutterActor to display maps.\n" "It also provides a Gtk+ widget to display maps in Gtk+ applications. Python\n" @@ -5395,32 +5769,32 @@ msgid "" "such as OpenStreetMap, OpenCycleMap, OpenAerialMap, and Maps for free." msgstr "" -#: gnu/packages/gnome.scm:3444 +#: gnu/packages/gnome.scm:3443 msgid "Object mapper from GObjects to SQLite" msgstr "" -#: gnu/packages/gnome.scm:3446 +#: gnu/packages/gnome.scm:3445 msgid "" "Gom provides an object mapper from GObjects to SQLite. It helps you\n" "write applications that need to store structured data as well as make complex\n" "queries upon that data." msgstr "" -#: gnu/packages/gnome.scm:3481 +#: gnu/packages/gnome.scm:3480 msgid "Useful functionality shared among GNOME games" msgstr "" -#: gnu/packages/gnome.scm:3483 +#: gnu/packages/gnome.scm:3482 msgid "" "libgnome-games-support is a small library intended for internal use by\n" "GNOME Games, but it may be used by others." msgstr "" -#: gnu/packages/gnome.scm:3511 +#: gnu/packages/gnome.scm:3510 msgid "Sliding block puzzles" msgstr "" -#: gnu/packages/gnome.scm:3513 +#: gnu/packages/gnome.scm:3512 msgid "" "GNOME Klotski is a set of block sliding puzzles. The objective is to move\n" "the patterned block to the area bordered by green markers. To do so, you will\n" @@ -5452,31 +5826,31 @@ msgid "" "which can read a large number of file formats." msgstr "" -#: gnu/packages/gnome.scm:3813 +#: gnu/packages/gnome.scm:3824 msgid "Music player for GNOME" msgstr "" -#: gnu/packages/gnome.scm:3814 +#: gnu/packages/gnome.scm:3825 msgid "" "Rhythmbox is a music playing application for GNOME. It\n" "supports playlists, song ratings, and any codecs installed through gstreamer." msgstr "" -#: gnu/packages/gnome.scm:3864 +#: gnu/packages/gnome.scm:3875 msgid "GNOME image viewer" msgstr "" -#: gnu/packages/gnome.scm:3865 +#: gnu/packages/gnome.scm:3876 msgid "" "Eye of GNOME is the GNOME image viewer. It\n" "supports image conversion, rotation, and slideshows." msgstr "" -#: gnu/packages/gnome.scm:3887 +#: gnu/packages/gnome.scm:3898 msgid "Extensions for the Eye of GNOME image viewer" msgstr "" -#: gnu/packages/gnome.scm:3899 +#: gnu/packages/gnome.scm:3910 msgid "" "This package provides plugins for the Eye of GNOME (EOG) image viewer,\n" "notably:\n" @@ -5489,21 +5863,21 @@ msgid "" "@end itemize\n" msgstr "" -#: gnu/packages/gnome.scm:3935 +#: gnu/packages/gnome.scm:3946 msgid "GObject bindings for libudev" msgstr "" -#: gnu/packages/gnome.scm:3937 +#: gnu/packages/gnome.scm:3948 msgid "" "This library provides GObject bindings for libudev. It was originally\n" "part of udev-extras, then udev, then systemd. It's now a project on its own." msgstr "" -#: gnu/packages/gnome.scm:3985 +#: gnu/packages/gnome.scm:3996 msgid "Userspace virtual file system for GIO" msgstr "" -#: gnu/packages/gnome.scm:3987 +#: gnu/packages/gnome.scm:3998 msgid "" "GVFS is a userspace virtual file system designed to work with the I/O\n" "abstraction of GIO. It contains a GIO module that seamlessly adds GVFS support\n" @@ -5514,11 +5888,11 @@ msgid "" "DAV, and others." msgstr "" -#: gnu/packages/gnome.scm:4033 +#: gnu/packages/gnome.scm:4031 msgid "GLib binding for libusb1" msgstr "GLib-binding for libusb1" -#: gnu/packages/gnome.scm:4035 +#: gnu/packages/gnome.scm:4033 msgid "" "GUsb is a GObject wrapper for libusb1 that makes it easy to do\n" "asynchronous control, bulk and interrupt transfers with proper cancellation\n" @@ -5526,11 +5900,11 @@ msgid "" "USB transfers with your high-level application or system daemon." msgstr "" -#: gnu/packages/gnome.scm:4086 +#: gnu/packages/gnome.scm:4084 msgid "Document and image scanner" msgstr "Dokument- og billedskanner" -#: gnu/packages/gnome.scm:4087 +#: gnu/packages/gnome.scm:4085 msgid "" "Simple Scan is an easy-to-use application, designed to let\n" "users connect their scanner and quickly have the image/document in an\n" @@ -5539,11 +5913,11 @@ msgid "" "work and the interface is well tested." msgstr "" -#: gnu/packages/gnome.scm:4160 +#: gnu/packages/gnome.scm:4152 msgid "Web browser for GNOME" msgstr "Internetbrowser for GNOME" -#: gnu/packages/gnome.scm:4162 +#: gnu/packages/gnome.scm:4154 msgid "" "Eolie is a new web browser for GNOME. It features Firefox sync support,\n" "a secret password store, an adblocker, and a modern UI." @@ -5552,52 +5926,52 @@ msgstr "" "synkroniseringsunderstøttelse, et hemmeligt lager for adgangskoder, en\n" "reklameblokering og en moderne brugerflade." -#: gnu/packages/gnome.scm:4214 +#: gnu/packages/gnome.scm:4211 msgid "GNOME web browser" msgstr "GNOME-internetbrowser" -#: gnu/packages/gnome.scm:4216 +#: gnu/packages/gnome.scm:4213 msgid "" "Epiphany is a GNOME web browser targeted at non-technical users. Its\n" "principles are simplicity and standards compliance." msgstr "" -#: gnu/packages/gnome.scm:4272 +#: gnu/packages/gnome.scm:4269 msgid "D-Bus debugger" msgstr "D-Bus-fejlsøger" -#: gnu/packages/gnome.scm:4274 +#: gnu/packages/gnome.scm:4271 msgid "" "D-Feet is a D-Bus debugger, which can be used to inspect D-Bus interfaces\n" "of running programs and invoke methods on those interfaces." msgstr "" -#: gnu/packages/gnome.scm:4296 +#: gnu/packages/gnome.scm:4293 msgid "XSL stylesheets for Yelp" msgstr "XSL-stilark for Yelp" -#: gnu/packages/gnome.scm:4298 +#: gnu/packages/gnome.scm:4295 msgid "" "Yelp-xsl contains XSL stylesheets that are used by the yelp help browser\n" "to format Docbook and Mallard documents." msgstr "" -#: gnu/packages/gnome.scm:4329 +#: gnu/packages/gnome.scm:4326 msgid "GNOME help browser" msgstr "" -#: gnu/packages/gnome.scm:4331 +#: gnu/packages/gnome.scm:4328 msgid "" "Yelp is the help viewer in Gnome. It natively views Mallard, DocBook,\n" "man, info, and HTML documents. It can locate documents according to the\n" "freedesktop.org help system specification." msgstr "" -#: gnu/packages/gnome.scm:4359 +#: gnu/packages/gnome.scm:4356 msgid "Yelp documentation tools" msgstr "Yelp-dokumentationsværktøjer" -#: gnu/packages/gnome.scm:4361 +#: gnu/packages/gnome.scm:4358 msgid "" "Yelp-tools is a collection of scripts and build utilities to help create,\n" "manage, and publish documentation for Yelp and the web. Most of the heavy\n" @@ -5605,32 +5979,32 @@ msgid "" "wraps things up in a developer-friendly way." msgstr "" -#: gnu/packages/gnome.scm:4398 +#: gnu/packages/gnome.scm:4395 msgid "GObject collection library" msgstr "GObject-samlingsbibliotek" -#: gnu/packages/gnome.scm:4400 +#: gnu/packages/gnome.scm:4397 msgid "" "Libgee is a utility library providing GObject-based interfaces and\n" "classes for commonly used data structures." msgstr "" -#: gnu/packages/gnome.scm:4427 +#: gnu/packages/gnome.scm:4424 msgid "GObject wrapper around the Exiv2 photo metadata library" msgstr "" -#: gnu/packages/gnome.scm:4429 +#: gnu/packages/gnome.scm:4426 msgid "" "Gexiv2 is a GObject wrapper around the Exiv2 photo metadata library. It\n" "allows for GNOME applications to easily inspect and update EXIF, IPTC, and XMP\n" "metadata in photo and video files of various formats." msgstr "" -#: gnu/packages/gnome.scm:4473 +#: gnu/packages/gnome.scm:4470 msgid "Photo manager for GNOME 3" msgstr "Billedhåndtering for GNOME 3" -#: gnu/packages/gnome.scm:4475 +#: gnu/packages/gnome.scm:4472 msgid "" "Shotwell is a digital photo manager designed for the GNOME desktop\n" "environment. It allows you to import photos from disk or camera, organize\n" @@ -5638,42 +6012,42 @@ msgid "" "share them with others via social networking and more." msgstr "" -#: gnu/packages/gnome.scm:4516 +#: gnu/packages/gnome.scm:4513 msgid "Graphical archive manager for GNOME" msgstr "Grafisk arkivhåndtering for GNOME" -#: gnu/packages/gnome.scm:4517 +#: gnu/packages/gnome.scm:4514 msgid "" "File Roller is an archive manager for the GNOME desktop\n" "environment that allows users to view, unpack, and create compressed archives\n" "such as gzip tarballs." msgstr "" -#: gnu/packages/gnome.scm:4595 +#: gnu/packages/gnome.scm:4592 msgid "Session manager for GNOME" msgstr "" -#: gnu/packages/gnome.scm:4597 +#: gnu/packages/gnome.scm:4594 msgid "" "This package contains the GNOME session manager, as well as a\n" "configuration program to choose applications starting on login." msgstr "" -#: gnu/packages/gnome.scm:4650 +#: gnu/packages/gnome.scm:4659 msgid "Javascript bindings for GNOME" msgstr "Javascript-bindinger for GNOME" -#: gnu/packages/gnome.scm:4653 +#: gnu/packages/gnome.scm:4662 msgid "" "Gjs is a javascript binding for GNOME. It's mainly based on spidermonkey\n" "javascript engine and the GObject introspection framework." msgstr "" -#: gnu/packages/gnome.scm:4712 +#: gnu/packages/gnome.scm:4721 msgid "GNOME text editor" msgstr "GNOME-tesktredigeringsprogram" -#: gnu/packages/gnome.scm:4713 +#: gnu/packages/gnome.scm:4722 msgid "" "While aiming at simplicity and ease of use, gedit is a\n" "powerful general purpose text editor." @@ -5681,21 +6055,21 @@ msgstr "" "Selv om den forsøger at være enkel og nem at bruge, så\n" "er gedit et funktionsrigt og alment tekstredigeringsprogram." -#: gnu/packages/gnome.scm:4737 +#: gnu/packages/gnome.scm:4746 msgid "Display graphical dialog boxes from shell scripts" msgstr "Vis grafiske dialogbokse fra skalskripter" -#: gnu/packages/gnome.scm:4740 +#: gnu/packages/gnome.scm:4749 msgid "" "Zenity is a rewrite of gdialog, the GNOME port of dialog which allows you\n" "to display dialog boxes from the commandline and shell scripts." msgstr "" -#: gnu/packages/gnome.scm:4839 +#: gnu/packages/gnome.scm:4848 msgid "Window and compositing manager" msgstr "" -#: gnu/packages/gnome.scm:4842 +#: gnu/packages/gnome.scm:4851 msgid "" "Mutter is a window and compositing manager that displays and manages your\n" "desktop via OpenGL. Mutter combines a sophisticated display engine using the\n" @@ -5703,11 +6077,11 @@ msgid "" "window manager." msgstr "" -#: gnu/packages/gnome.scm:4876 +#: gnu/packages/gnome.scm:4885 msgid "Single sign-on framework for GNOME" msgstr "" -#: gnu/packages/gnome.scm:4879 +#: gnu/packages/gnome.scm:4888 msgid "" "GNOME Online Accounts provides interfaces so that applications and\n" "libraries in GNOME can access the user's online accounts. It has providers for\n" @@ -5715,32 +6089,32 @@ msgid "" "Exchange, Last.fm, IMAP/SMTP, Jabber, SIP and Kerberos." msgstr "" -#: gnu/packages/gnome.scm:4957 +#: gnu/packages/gnome.scm:4972 msgid "Store address books and calendars" msgstr "" -#: gnu/packages/gnome.scm:4960 +#: gnu/packages/gnome.scm:4975 msgid "" "This package provides a unified backend for programs that work with\n" "contacts, tasks, and calendar information. It was originally developed for\n" "Evolution (hence the name), but is now used by other packages as well." msgstr "" -#: gnu/packages/gnome.scm:5023 +#: gnu/packages/gnome.scm:5038 msgid "Text entry and UI navigation application" msgstr "" -#: gnu/packages/gnome.scm:5026 +#: gnu/packages/gnome.scm:5041 msgid "" "Caribou is an input assistive technology intended for switch and pointer\n" "users." msgstr "" -#: gnu/packages/gnome.scm:5143 +#: gnu/packages/gnome.scm:5159 msgid "Network connection manager" msgstr "" -#: gnu/packages/gnome.scm:5146 +#: gnu/packages/gnome.scm:5162 msgid "" "NetworkManager is a system network service that manages your network\n" "devices and connections, attempting to keep active network connectivity when\n" @@ -5749,39 +6123,39 @@ msgid "" "services." msgstr "" -#: gnu/packages/gnome.scm:5180 +#: gnu/packages/gnome.scm:5196 msgid "OpenVPN plug-in for NetworkManager" msgstr "" -#: gnu/packages/gnome.scm:5182 +#: gnu/packages/gnome.scm:5198 msgid "" "This extension of NetworkManager allows it to take care of connections\n" "to virtual private networks (VPNs) via OpenVPN." msgstr "" -#: gnu/packages/gnome.scm:5204 +#: gnu/packages/gnome.scm:5220 msgid "Database of broadband connection configuration" msgstr "" -#: gnu/packages/gnome.scm:5205 +#: gnu/packages/gnome.scm:5221 msgid "Database of broadband connection configuration." msgstr "" -#: gnu/packages/gnome.scm:5239 +#: gnu/packages/gnome.scm:5255 msgid "Applet for managing network connections" msgstr "" -#: gnu/packages/gnome.scm:5242 +#: gnu/packages/gnome.scm:5258 msgid "" "This package contains a systray applet for NetworkManager. It displays\n" "the available networks and allows users to easily switch between them." msgstr "" -#: gnu/packages/gnome.scm:5267 +#: gnu/packages/gnome.scm:5283 msgid "C++ wrapper for XML parser library libxml2" msgstr "C++-omslag for XML-fortolkerbiblioteket libxml2" -#: gnu/packages/gnome.scm:5269 +#: gnu/packages/gnome.scm:5285 msgid "" "This package provides a C++ wrapper for the XML parser library\n" "libxml2." @@ -5789,41 +6163,41 @@ msgstr "" "Denne pakke tilbyder et C++-omslag for XML-fortolkerbiblioteket\n" "libxml2." -#: gnu/packages/gnome.scm:5405 +#: gnu/packages/gnome.scm:5422 msgid "Display manager for GNOME" msgstr "" -#: gnu/packages/gnome.scm:5408 +#: gnu/packages/gnome.scm:5425 msgid "" "GNOME Display Manager is a system service that is responsible for\n" "providing graphical log-ins and managing local and remote displays." msgstr "" -#: gnu/packages/gnome.scm:5432 +#: gnu/packages/gnome.scm:5449 msgid "Portable system access library" msgstr "" -#: gnu/packages/gnome.scm:5435 +#: gnu/packages/gnome.scm:5452 msgid "" "LibGTop is a library to get system specific data such as CPU and memory\n" "usage and information about running processes." msgstr "" -#: gnu/packages/gnome.scm:5465 +#: gnu/packages/gnome.scm:5482 msgid "GNOME Bluetooth subsystem" msgstr "" -#: gnu/packages/gnome.scm:5468 +#: gnu/packages/gnome.scm:5485 msgid "" "This package contains tools for managing and manipulating Bluetooth\n" "devices using the GNOME desktop." msgstr "" -#: gnu/packages/gnome.scm:5534 +#: gnu/packages/gnome.scm:5551 msgid "Utilities to configure the GNOME desktop" msgstr "" -#: gnu/packages/gnome.scm:5537 +#: gnu/packages/gnome.scm:5554 msgid "" "This package contains configuration applets for the GNOME desktop,\n" "allowing to set accessibility configuration, desktop fonts, keyboard and mouse\n" @@ -5831,21 +6205,21 @@ msgid "" "properties, screen resolution, and other GNOME parameters." msgstr "" -#: gnu/packages/gnome.scm:5622 +#: gnu/packages/gnome.scm:5639 msgid "Desktop shell for GNOME" msgstr "" -#: gnu/packages/gnome.scm:5625 +#: gnu/packages/gnome.scm:5642 msgid "" "GNOME Shell provides core user interface functions for the GNOME desktop,\n" "like switching to windows and launching applications." msgstr "" -#: gnu/packages/gnome.scm:5660 +#: gnu/packages/gnome.scm:5677 msgid "VNC viewer widget for GTK+" msgstr "" -#: gnu/packages/gnome.scm:5662 +#: gnu/packages/gnome.scm:5679 msgid "" "GTK-VNC is a VNC viewer widget for GTK+, used by remote desktop viewing\n" "applications, for instance the Vinagre client, GNOME Boxes and virt-viewer.\n" @@ -5853,43 +6227,43 @@ msgid "" "as SASL, TLS and VeNCrypt. Additionally it supports encoding extensions." msgstr "" -#: gnu/packages/gnome.scm:5690 +#: gnu/packages/gnome.scm:5707 msgid "Archives integration support for GNOME" msgstr "" -#: gnu/packages/gnome.scm:5693 +#: gnu/packages/gnome.scm:5710 msgid "" "GNOME Autoar is a library which makes creating and extracting archives\n" "easy, safe, and automatic." msgstr "" -#: gnu/packages/gnome.scm:5745 +#: gnu/packages/gnome.scm:5762 msgid "Metadata database, indexer and search tool" msgstr "" -#: gnu/packages/gnome.scm:5748 +#: gnu/packages/gnome.scm:5765 msgid "" "Tracker is an advanced framework for first class objects with associated\n" "metadata and tags. It provides a one stop solution for all metadata, tags,\n" "shared object databases, search tools and indexing." msgstr "" -#: gnu/packages/gnome.scm:5799 +#: gnu/packages/gnome.scm:5816 msgid "File manager for GNOME" msgstr "Filhåndtering for GNOME" -#: gnu/packages/gnome.scm:5802 +#: gnu/packages/gnome.scm:5819 msgid "" "Nautilus (Files) is a file manager designed to fit the GNOME desktop\n" "design and behaviour, giving the user a simple way to navigate and manage its\n" "files." msgstr "" -#: gnu/packages/gnome.scm:5830 +#: gnu/packages/gnome.scm:5851 msgid "Disk usage analyzer for GNOME" msgstr "" -#: gnu/packages/gnome.scm:5832 +#: gnu/packages/gnome.scm:5853 msgid "" "Baobab (Disk Usage Analyzer) is a graphical application to analyse disk\n" "usage in the GNOME desktop environment. It can easily scan device volumes or\n" @@ -5897,11 +6271,11 @@ msgid "" "is complete it provides a graphical representation of each selected folder." msgstr "" -#: gnu/packages/gnome.scm:5856 +#: gnu/packages/gnome.scm:5877 msgid "Background images for the GNOME desktop" msgstr "" -#: gnu/packages/gnome.scm:5858 +#: gnu/packages/gnome.scm:5879 msgid "" "GNOME backgrounds package contains a collection of graphics files which\n" "can be used as backgrounds in the GNOME Desktop environment. Additionally,\n" @@ -5909,33 +6283,33 @@ msgid "" "can add your own files to the collection." msgstr "" -#: gnu/packages/gnome.scm:5891 +#: gnu/packages/gnome.scm:5912 msgid "Take pictures of your screen" msgstr "" -#: gnu/packages/gnome.scm:5893 +#: gnu/packages/gnome.scm:5914 msgid "" "GNOME Screenshot is a utility used for taking screenshots of the entire\n" "screen, a window or a user defined area of the screen, with optional\n" "beautifying border effects." msgstr "" -#: gnu/packages/gnome.scm:5930 +#: gnu/packages/gnome.scm:5951 msgid "Graphical editor for GNOME's dconf configuration system" msgstr "" -#: gnu/packages/gnome.scm:5932 +#: gnu/packages/gnome.scm:5953 msgid "" "Dconf-editor is a graphical tool for browsing and editing the dconf\n" "configuration system for GNOME. It allows users to configure desktop\n" "software that do not provide their own configuration interface." msgstr "" -#: gnu/packages/gnome.scm:5961 +#: gnu/packages/gnome.scm:5982 msgid "Default MIME type associations for the GNOME desktop" msgstr "MIME-typeassociatoner for GNOME-skrivebordet." -#: gnu/packages/gnome.scm:5963 +#: gnu/packages/gnome.scm:5984 msgid "" "Given many installed packages which might handle a given MIME type, a\n" "user running the GNOME desktop probably has some preferences: for example,\n" @@ -5944,94 +6318,94 @@ msgid "" "associations for GNOME." msgstr "" -#: gnu/packages/gnome.scm:6022 +#: gnu/packages/gnome.scm:6043 msgid "The GNU desktop environment" msgstr "GNU-skrivebordsmiljøet" -#: gnu/packages/gnome.scm:6025 +#: gnu/packages/gnome.scm:6046 msgid "" "GNOME is the graphical desktop for GNU. It includes a wide variety of\n" "applications for browsing the web, editing text and images, creating\n" "documents and diagrams, playing media, scanning, and much more." msgstr "" -#: gnu/packages/gnome.scm:6077 +#: gnu/packages/gnome.scm:6098 msgid "Desktop recording program" msgstr "Skrivebordsoptagelsesprogram" -#: gnu/packages/gnome.scm:6078 +#: gnu/packages/gnome.scm:6099 msgid "" "Byzanz is a simple desktop recording program with a\n" "command-line interface. It can record part or all of an X display for a\n" "specified duration and save it as a GIF encoded animated image file." msgstr "" -#: gnu/packages/gnome.scm:6105 +#: gnu/packages/gnome.scm:6126 msgid "GObject wrapper for libcanberra" msgstr "GObject-omslag for libcanberra" -#: gnu/packages/gnome.scm:6107 +#: gnu/packages/gnome.scm:6128 msgid "" "GSound is a small library for playing system sounds. It's designed to be\n" "used via GObject Introspection, and is a thin wrapper around the libcanberra C\n" "library." msgstr "" -#: gnu/packages/gnome.scm:6134 +#: gnu/packages/gnome.scm:6155 msgid "Library for accessing SkyDrive and Hotmail" msgstr "Bibliotek til at tilgå SkyDrive og Hotmail" -#: gnu/packages/gnome.scm:6136 +#: gnu/packages/gnome.scm:6157 msgid "" "Libzapojit is a GLib-based library for accessing online service APIs of\n" "Microsoft SkyDrive and Hotmail, using their REST protocols." msgstr "" -#: gnu/packages/gnome.scm:6172 +#: gnu/packages/gnome.scm:6193 msgid "GNOME's clock application" msgstr "GNOME's urprogram" -#: gnu/packages/gnome.scm:6174 +#: gnu/packages/gnome.scm:6195 msgid "" "GNOME Clocks is a simple clocks application designed to fit the GNOME\n" "desktop. It supports world clock, stop watch, alarms, and count down timer." msgstr "" -#: gnu/packages/gnome.scm:6206 +#: gnu/packages/gnome.scm:6227 msgid "GNOME's calendar application" msgstr "GNOME's kalenderprogram" -#: gnu/packages/gnome.scm:6208 +#: gnu/packages/gnome.scm:6229 msgid "" "GNOME Calendar is a simple calendar application designed to fit the GNOME\n" "desktop. It supports multiple calendars, month, week and year view." msgstr "" -#: gnu/packages/gnome.scm:6258 +#: gnu/packages/gnome.scm:6279 msgid "GNOME's ToDo Application" msgstr "GNOME's huskeseddelprogram" -#: gnu/packages/gnome.scm:6260 +#: gnu/packages/gnome.scm:6281 msgid "" "GNOME To Do is a simplistic personal task manager designed to perfectly\n" "fit the GNOME desktop." msgstr "" -#: gnu/packages/gnome.scm:6288 +#: gnu/packages/gnome.scm:6319 msgid "Look up words in dictionary sources" msgstr "" -#: gnu/packages/gnome.scm:6290 +#: gnu/packages/gnome.scm:6321 msgid "" "GNOME Dictionary can look for the definition or translation of a word in\n" "existing databases over the internet." msgstr "" -#: gnu/packages/gnome.scm:6350 +#: gnu/packages/gnome.scm:6381 msgid "Customize advanced GNOME 3 options" msgstr "Tilpas avancerede GNOME 3-indstillinger" -#: gnu/packages/gnome.scm:6353 +#: gnu/packages/gnome.scm:6384 msgid "" "GNOME Tweak Tool allows adjusting advanced configuration settings in\n" "GNOME 3. This includes things like the fonts used in user interface elements,\n" @@ -6039,32 +6413,32 @@ msgid "" "GNOME Shell appearance and extension, etc." msgstr "" -#: gnu/packages/gnome.scm:6380 +#: gnu/packages/gnome.scm:6411 msgid "Extensions for GNOME Shell" msgstr "" -#: gnu/packages/gnome.scm:6381 +#: gnu/packages/gnome.scm:6412 msgid "" "GNOME Shell extensions modify and extend GNOME Shell\n" "functionality and behavior." msgstr "" -#: gnu/packages/gnome.scm:6411 +#: gnu/packages/gnome.scm:6442 msgid "A flat GTK+ theme with transparent elements" msgstr "" -#: gnu/packages/gnome.scm:6412 +#: gnu/packages/gnome.scm:6443 msgid "" "Arc is a flat theme with transparent elements for GTK 3, GTK\n" "2, and GNOME Shell which supports GTK 3 and GTK 2 based desktop environments\n" "like GNOME, Unity, Budgie, Pantheon, XFCE, Mate, etc." msgstr "" -#: gnu/packages/gnome.scm:6448 +#: gnu/packages/gnome.scm:6474 msgid "Faba icon theme" msgstr "Faba-ikontema" -#: gnu/packages/gnome.scm:6450 +#: gnu/packages/gnome.scm:6476 msgid "" "Faba is a minimal icon set used as a basis for other themes such as\n" "Moka" @@ -6072,32 +6446,32 @@ msgstr "" "Faba er et minimalt ikonsæt brugt som grundlag for andre temaer\n" "såsom Moka" -#: gnu/packages/gnome.scm:6474 +#: gnu/packages/gnome.scm:6500 msgid "Moka icon theme" msgstr "Moka-ikontema" -#: gnu/packages/gnome.scm:6475 +#: gnu/packages/gnome.scm:6501 msgid "" "Moka is a stylized desktop icon set, designed to be clear,\n" "simple and consistent." msgstr "" -#: gnu/packages/gnome.scm:6505 +#: gnu/packages/gnome.scm:6533 msgid "Arc icon theme" msgstr "Arc-ikontema" -#: gnu/packages/gnome.scm:6506 +#: gnu/packages/gnome.scm:6534 msgid "" "The Arc icon theme provides a set of icons matching the\n" "style of the Arc GTK theme. Icons missing from the Arc theme are provided by\n" "the Moka icon theme." msgstr "" -#: gnu/packages/gnome.scm:6538 +#: gnu/packages/gnome.scm:6566 msgid "Library to aggregate data about people" msgstr "Bibliotek til at aggregere data om folk" -#: gnu/packages/gnome.scm:6539 +#: gnu/packages/gnome.scm:6567 msgid "" "Libfolks is a library that aggregates information about people\n" "from multiple sources (e.g., Telepathy connection managers for IM contacts,\n" @@ -6106,31 +6480,31 @@ msgid "" "compiled." msgstr "" -#: gnu/packages/gnome.scm:6574 +#: gnu/packages/gnome.scm:6602 msgid "GLib/GObject wrapper for the Facebook API" msgstr "GLib/GObject-omslag for Facebook-API'en" -#: gnu/packages/gnome.scm:6575 +#: gnu/packages/gnome.scm:6603 msgid "" "This library allows you to use the Facebook API from\n" "GLib/GObject code." msgstr "" -#: gnu/packages/gnome.scm:6603 +#: gnu/packages/gnome.scm:6631 msgid "GNOME keyboard configuration library" msgstr "Konfigurationsbibliotek for GNOME-tastatur" -#: gnu/packages/gnome.scm:6605 +#: gnu/packages/gnome.scm:6633 msgid "" "Libgnomekbd is a keyboard configuration library for the GNOME desktop\n" "environment, which can notably display keyboard layouts." msgstr "" -#: gnu/packages/gnome.scm:6639 +#: gnu/packages/gnome.scm:6667 msgid "Library for writing single instance applications" msgstr "Bibliotek til at skrive enkel instans-programmer" -#: gnu/packages/gnome.scm:6641 +#: gnu/packages/gnome.scm:6669 msgid "" "Libunique is a library for writing single instance applications. If you\n" "launch a single instance application twice, the second instance will either just\n" @@ -6140,32 +6514,32 @@ msgid "" "handling the startup notification side." msgstr "" -#: gnu/packages/gnome.scm:6674 +#: gnu/packages/gnome.scm:6702 msgid "Desktop calculator" msgstr "Skrivebordslommeregner" -#: gnu/packages/gnome.scm:6676 +#: gnu/packages/gnome.scm:6704 msgid "" "Calculator is an application that solves mathematical equations and\n" "is suitable as a default application in a Desktop environment." msgstr "" -#: gnu/packages/gnome.scm:6710 +#: gnu/packages/gnome.scm:6732 msgid "Virtual sticky note" msgstr "" -#: gnu/packages/gnome.scm:6712 +#: gnu/packages/gnome.scm:6734 msgid "" "Xpad is a sticky note that strives to be simple, fault tolerant,\n" "and customizable. Xpad consists of independent pad windows, each is\n" "basically a text box in which notes can be written." msgstr "" -#: gnu/packages/gnome.scm:6742 +#: gnu/packages/gnome.scm:6764 msgid "Unicode character picker and font browser" msgstr "" -#: gnu/packages/gnome.scm:6744 +#: gnu/packages/gnome.scm:6766 msgid "" "This program allows you to browse through all the available Unicode\n" "characters and categories for the installed fonts, and to examine their\n" @@ -6173,22 +6547,22 @@ msgid "" "only know by its Unicode name or code point." msgstr "" -#: gnu/packages/gnome.scm:6774 +#: gnu/packages/gnome.scm:6796 msgid "Web development studio" msgstr "" -#: gnu/packages/gnome.scm:6776 +#: gnu/packages/gnome.scm:6798 msgid "" "Bluefish is an editor targeted towards programmers and web developers,\n" "with many options to write web sites, scripts and other code.\n" "Bluefish supports many programming and markup languages." msgstr "" -#: gnu/packages/gnome.scm:6808 +#: gnu/packages/gnome.scm:6830 msgid "Process viewer and system resource monitor for GNOME" msgstr "" -#: gnu/packages/gnome.scm:6810 +#: gnu/packages/gnome.scm:6832 msgid "" "GNOME System Monitor is a GNOME process viewer and system monitor with\n" "an attractive, easy-to-use interface. It has features, such as a tree view\n" @@ -6197,11 +6571,11 @@ msgid "" "kill/reinice processes." msgstr "" -#: gnu/packages/gnome.scm:6836 +#: gnu/packages/gnome.scm:6858 msgid "Python client bindings for D-Bus AT-SPI" msgstr "Pythonklientbindinger for D-Bus AT-SPI" -#: gnu/packages/gnome.scm:6840 +#: gnu/packages/gnome.scm:6862 msgid "" "This package includes a python client library for the AT-SPI D-Bus\n" "accessibility infrastructure." @@ -6209,33 +6583,33 @@ msgstr "" "Denne pakke indeholder et Pythonklientbibliotek for AT-SPI D-Bus-\n" "tilgængelighedsinfrastrukturen." -#: gnu/packages/gnome.scm:6899 +#: gnu/packages/gnome.scm:6921 msgid "Screen reader for individuals who are blind or visually impaired" msgstr "Skærmlæser for personer som er blinde eller har synsnedsættelse" -#: gnu/packages/gnome.scm:6902 +#: gnu/packages/gnome.scm:6924 msgid "" "Orca is a screen reader that provides access to the graphical desktop\n" "via speech and refreshable braille. Orca works with applications and toolkits\n" "that support the Assistive Technology Service Provider Interface (AT-SPI)." msgstr "" -#: gnu/packages/gnome.scm:6954 +#: gnu/packages/gnome.scm:6976 msgid "GNOME's alternative spell checker" msgstr "" -#: gnu/packages/gnome.scm:6956 +#: gnu/packages/gnome.scm:6978 msgid "" "gspell provides a flexible API to add spell-checking to a GTK+\n" "application. It provides a GObject API, spell-checking to text entries and\n" "text views, and buttons to choose the language." msgstr "" -#: gnu/packages/gnome.scm:6998 +#: gnu/packages/gnome.scm:7020 msgid "Project management software for the GNOME desktop" msgstr "Projekthåndteringsprogram for GNOME-skrivebordet" -#: gnu/packages/gnome.scm:7000 +#: gnu/packages/gnome.scm:7022 msgid "" "GNOME Planner is a project management tool based on the Work Breakdown\n" "Structure (WBS). Its goal is to enable you to easily plan projects. Based on\n" @@ -6247,11 +6621,11 @@ msgid "" "views can be printed as PDF or PostScript files, or exported to HTML." msgstr "" -#: gnu/packages/gnome.scm:7066 +#: gnu/packages/gnome.scm:7088 msgid "GNOME music playing application" msgstr "GNOME's musikafspilningsprogram" -#: gnu/packages/gnome.scm:7068 +#: gnu/packages/gnome.scm:7090 msgid "" "Lollypop is a music player designed to play well with GNOME desktop.\n" "Lollypop plays audio formats such as mp3, mp4, ogg and flac and gets information\n" @@ -6259,31 +6633,31 @@ msgid "" "automatically and it can stream songs from online music services and charts." msgstr "" -#: gnu/packages/gnome.scm:7095 +#: gnu/packages/gnome.scm:7117 msgid "Video effects for Cheese and other GNOME applications" msgstr "Videoeffekter for Cheese og andre GNOME-programmer" -#: gnu/packages/gnome.scm:7097 +#: gnu/packages/gnome.scm:7119 msgid "" "A collection of GStreamer video filters and effects to be used in\n" "photo-booth-like software, such as Cheese." msgstr "" -#: gnu/packages/gnome.scm:7157 +#: gnu/packages/gnome.scm:7179 msgid "Webcam photo booth software for GNOME" msgstr "" -#: gnu/packages/gnome.scm:7159 +#: gnu/packages/gnome.scm:7181 msgid "" "Cheese uses your webcam to take photos and videos. Cheese can also\n" "apply fancy special effects and lets you share the fun with others." msgstr "" -#: gnu/packages/gnome.scm:7196 +#: gnu/packages/gnome.scm:7218 msgid "Audio music cd ripper" msgstr "" -#: gnu/packages/gnome.scm:7197 +#: gnu/packages/gnome.scm:7219 msgid "" "Sound Juicer extracts audio from compact discs and convert it\n" "into audio files that a personal computer or digital audio player can play.\n" @@ -6291,11 +6665,45 @@ msgid "" "mp3, Ogg Vorbis and FLAC" msgstr "" -#: gnu/packages/gnuzilla.scm:118 +#: gnu/packages/gnome.scm:7283 +msgid "Convert between audio formats with a graphical interface" +msgstr "" + +#: gnu/packages/gnome.scm:7285 +msgid "" +"SoundConverter supports converting between many audio formats including\n" +"Opus, Ogg Vorbis, FLAC and more. It supports parallel conversion, and\n" +"configurable file renaming. " +msgstr "" + +#: gnu/packages/gnome.scm:7330 +msgid "Tool to help prevent repetitive strain injury (RSI)" +msgstr "" + +#: gnu/packages/gnome.scm:7332 +msgid "" +"Workrave is a program that assists in the recovery and prevention of\n" +"repetitive strain injury (@dfn{RSI}). The program frequently alerts you to take\n" +"micro-pauses and rest breaks, and restricts you to your daily limit." +msgstr "" + +#: gnu/packages/gnome.scm:7361 +msgid "GNOME hexadecimal editor" +msgstr "GNOME-hexadecimalt redigeringsprogram" + +#: gnu/packages/gnome.scm:7362 +msgid "" +"The GHex program can view and edit files in two ways:\n" +"hexadecimal or ASCII. It is useful for editing binary files in general." +msgstr "" +"GHex-programmet kan vise og redigere filer på to måder:\n" +"hexadecimal eller ASCII. Det er nyttigt til at redigere binære filer generelt." + +#: gnu/packages/gnuzilla.scm:127 msgid "Mozilla javascript engine" msgstr "Mozillas javascriptmotor" -#: gnu/packages/gnuzilla.scm:119 +#: gnu/packages/gnuzilla.scm:128 msgid "" "SpiderMonkey is Mozilla's JavaScript engine written\n" "in C/C++." @@ -6303,22 +6711,22 @@ msgstr "" "SpiderMonkey er Mozillas JavaScript-motor skrevet\n" "i C/C++." -#: gnu/packages/gnuzilla.scm:280 +#: gnu/packages/gnuzilla.scm:357 msgid "Netscape API for system level and libc-like functions" msgstr "" -#: gnu/packages/gnuzilla.scm:281 +#: gnu/packages/gnuzilla.scm:358 msgid "" "Netscape Portable Runtime (@dfn{NSPR}) provides a\n" "platform-neutral API for system level and libc-like functions. It is used\n" "in the Mozilla clients." msgstr "" -#: gnu/packages/gnuzilla.scm:387 +#: gnu/packages/gnuzilla.scm:464 msgid "Network Security Services" msgstr "" -#: gnu/packages/gnuzilla.scm:389 +#: gnu/packages/gnuzilla.scm:466 msgid "" "Network Security Services (@dfn{NSS}) is a set of libraries designed to\n" "support cross-platform development of security-enabled client and server\n" @@ -6327,33 +6735,33 @@ msgid "" "security standards." msgstr "" -#: gnu/packages/gnuzilla.scm:762 +#: gnu/packages/gnuzilla.scm:840 msgid "Entirely free browser derived from Mozilla Firefox" msgstr "" -#: gnu/packages/gnuzilla.scm:764 +#: gnu/packages/gnuzilla.scm:842 msgid "" "IceCat is the GNU version of the Firefox browser. It is entirely free\n" "software, which does not recommend non-free plugins and addons. It also\n" "features built-in privacy-protecting features." msgstr "" -#: gnu/packages/gtk.scm:101 +#: gnu/packages/gtk.scm:105 msgid "GNOME accessibility toolkit" msgstr "" -#: gnu/packages/gtk.scm:103 +#: gnu/packages/gtk.scm:107 msgid "" "ATK provides the set of accessibility interfaces that are implemented\n" "by other toolkits and applications. Using the ATK interfaces, accessibility\n" "tools have full access to view and control running applications." msgstr "" -#: gnu/packages/gtk.scm:143 +#: gnu/packages/gtk.scm:147 msgid "2D graphics library" msgstr "2D-grafikbibliotek" -#: gnu/packages/gtk.scm:145 +#: gnu/packages/gtk.scm:149 msgid "" "Cairo is a 2D graphics library with support for multiple output devices.\n" "Currently supported output targets include the X Window System (via both\n" @@ -6371,56 +6779,56 @@ msgid "" "affine transformation (scale, rotation, shear, etc.)." msgstr "" -#: gnu/packages/gtk.scm:173 +#: gnu/packages/gtk.scm:177 msgid "2D graphics library (with X11 support)" msgstr "2D-grafikbibliotek (med X11-understøttelse)" -#: gnu/packages/gtk.scm:206 +#: gnu/packages/gtk.scm:211 msgid "OpenType text shaping engine" msgstr "OpenType-tekstformningsmotor" -#: gnu/packages/gtk.scm:208 +#: gnu/packages/gtk.scm:213 msgid "HarfBuzz is an OpenType text shaping engine." msgstr "HarfBuzz er et OpenType-tekstformningsmotor." -#: gnu/packages/gtk.scm:239 +#: gnu/packages/gtk.scm:250 msgid "GNOME text and font handling library" msgstr "" -#: gnu/packages/gtk.scm:241 +#: gnu/packages/gtk.scm:252 msgid "" "Pango is the core text and font handling library used in GNOME\n" "applications. It has extensive support for the different writing systems\n" "used throughout the world." msgstr "" -#: gnu/packages/gtk.scm:267 +#: gnu/packages/gtk.scm:291 msgid "Obsolete pango functions" msgstr "" -#: gnu/packages/gtk.scm:268 +#: gnu/packages/gtk.scm:292 msgid "" "Pangox was a X backend to pango. It is now obsolete and no\n" "longer provided by recent pango releases. pangox-compat provides the\n" "functions which were removed." msgstr "" -#: gnu/packages/gtk.scm:305 +#: gnu/packages/gtk.scm:329 msgid "GTK+ widget for interactive graph-like environments" msgstr "" -#: gnu/packages/gtk.scm:307 +#: gnu/packages/gtk.scm:331 msgid "" "Ganv is an interactive GTK+ widget for interactive “boxes and lines” or\n" "graph-like environments, e.g. modular synths or finite state machine\n" "diagrams." msgstr "" -#: gnu/packages/gtk.scm:376 +#: gnu/packages/gtk.scm:400 msgid "Widget that extends the standard GTK+ 2.x 'GtkTextView' widget" msgstr "" -#: gnu/packages/gtk.scm:378 +#: gnu/packages/gtk.scm:402 msgid "" "GtkSourceView is a portable C library that extends the standard GTK+\n" "framework for multiline text editing with support for configurable syntax\n" @@ -6428,56 +6836,56 @@ msgid "" "printing and other features typical of a source code editor." msgstr "" -#: gnu/packages/gtk.scm:427 +#: gnu/packages/gtk.scm:451 msgid "GNOME source code widget" msgstr "" -#: gnu/packages/gtk.scm:428 +#: gnu/packages/gtk.scm:452 msgid "" "GtkSourceView is a text widget that extends the standard\n" "GTK+ text widget GtkTextView. It improves GtkTextView by implementing syntax\n" "highlighting and other features typical of a source code editor." msgstr "" -#: gnu/packages/gtk.scm:478 +#: gnu/packages/gtk.scm:502 msgid "GNOME image loading and manipulation library" msgstr "" -#: gnu/packages/gtk.scm:480 +#: gnu/packages/gtk.scm:504 msgid "" "GdkPixbuf is a library for image loading and manipulation developed\n" "in the GNOME project." msgstr "" -#: gnu/packages/gtk.scm:512 +#: gnu/packages/gtk.scm:538 msgid "GNOME image loading and manipulation library, with SVG support" msgstr "GNOME-billedindlæsnings- og manipuleringsbibliotek, med SVG-understøttelse" -#: gnu/packages/gtk.scm:552 +#: gnu/packages/gtk.scm:578 msgid "Assistive Technology Service Provider Interface, core components" msgstr "" -#: gnu/packages/gtk.scm:554 +#: gnu/packages/gtk.scm:580 msgid "" "The Assistive Technology Service Provider Interface, core components,\n" "is part of the GNOME accessibility project." msgstr "" -#: gnu/packages/gtk.scm:587 +#: gnu/packages/gtk.scm:613 msgid "Assistive Technology Service Provider Interface, ATK bindings" msgstr "" -#: gnu/packages/gtk.scm:589 +#: gnu/packages/gtk.scm:615 msgid "" "The Assistive Technology Service Provider Interface\n" "is part of the GNOME accessibility project." msgstr "" -#: gnu/packages/gtk.scm:648 +#: gnu/packages/gtk.scm:675 msgid "Cross-platform toolkit for creating graphical user interfaces" msgstr "" -#: gnu/packages/gtk.scm:650 +#: gnu/packages/gtk.scm:677 msgid "" "GTK+, or the GIMP Toolkit, is a multi-platform toolkit for creating\n" "graphical user interfaces. Offering a complete set of widgets, GTK+ is\n" @@ -6485,11 +6893,11 @@ msgid "" "application suites." msgstr "" -#: gnu/packages/gtk.scm:812 +#: gnu/packages/gtk.scm:811 msgid "Cairo bindings for GNU Guile" msgstr "" -#: gnu/packages/gtk.scm:814 +#: gnu/packages/gtk.scm:813 msgid "" "Guile-Cairo wraps the Cairo graphics library for Guile Scheme.\n" "Guile-Cairo is complete, wrapping almost all of the Cairo API. It is API\n" @@ -6499,21 +6907,21 @@ msgid "" "exceptions, macros, and a dynamic programming environment." msgstr "" -#: gnu/packages/gtk.scm:860 +#: gnu/packages/gtk.scm:861 msgid "Render SVG images using Cairo from Guile" msgstr "" -#: gnu/packages/gtk.scm:862 +#: gnu/packages/gtk.scm:863 msgid "" "Guile-RSVG wraps the RSVG library for Guile, allowing you to render SVG\n" "images onto Cairo surfaces." msgstr "" -#: gnu/packages/gtk.scm:907 +#: gnu/packages/gtk.scm:903 msgid "Create SVG or PDF presentations in Guile" msgstr "Opret SVG- eller PDF-præsentationer i Guile" -#: gnu/packages/gtk.scm:909 +#: gnu/packages/gtk.scm:905 msgid "" "Guile-Present defines a declarative vocabulary for presentations,\n" "together with tools to render presentation documents as SVG or PDF.\n" @@ -6522,51 +6930,51 @@ msgid "" "documents." msgstr "" -#: gnu/packages/gtk.scm:963 +#: gnu/packages/gtk.scm:959 msgid "Guile interface for GTK+ programming for GNOME" msgstr "Guile brugerflade til GTK+-programmering for GNOME" -#: gnu/packages/gtk.scm:965 +#: gnu/packages/gtk.scm:961 msgid "" "Includes guile-clutter, guile-gnome-gstreamer,\n" "guile-gnome-platform (GNOME developer libraries), and guile-gtksourceview." msgstr "" -#: gnu/packages/gtk.scm:998 +#: gnu/packages/gtk.scm:994 msgid "C++ bindings to the Cairo 2D graphics library" msgstr "C++-bindinger til CAiro 2D-grafikbiblioteket" -#: gnu/packages/gtk.scm:1000 +#: gnu/packages/gtk.scm:996 msgid "" "Cairomm provides a C++ programming interface to the Cairo 2D graphics\n" "library." msgstr "" -#: gnu/packages/gtk.scm:1024 +#: gnu/packages/gtk.scm:1020 msgid "C++ interface to the Pango text rendering library" msgstr "C++-grænseflade til tekstoptegningsbiblioteket Pango" -#: gnu/packages/gtk.scm:1026 +#: gnu/packages/gtk.scm:1022 msgid "" "Pangomm provides a C++ programming interface to the Pango text rendering\n" "library." msgstr "" -#: gnu/packages/gtk.scm:1047 +#: gnu/packages/gtk.scm:1043 msgid "C++ interface to the ATK accessibility library" msgstr "C++-grænseflade til ATK-tilgængelighedsbiblioteket" -#: gnu/packages/gtk.scm:1049 +#: gnu/packages/gtk.scm:1045 msgid "" "ATKmm provides a C++ programming interface to the ATK accessibility\n" "toolkit." msgstr "" -#: gnu/packages/gtk.scm:1093 +#: gnu/packages/gtk.scm:1089 msgid "C++ interface to the GTK+ graphical user interface library" msgstr "" -#: gnu/packages/gtk.scm:1095 +#: gnu/packages/gtk.scm:1091 msgid "" "gtkmm is the official C++ interface for the popular GUI library GTK+.\n" "Highlights include typesafe callbacks, and a comprehensive set of widgets that\n" @@ -6575,11 +6983,11 @@ msgid "" "extensive documentation, including API reference and a tutorial." msgstr "" -#: gnu/packages/gtk.scm:1144 +#: gnu/packages/gtk.scm:1140 msgid "C++ interface to the GTK+ 'GtkTextView' widget" msgstr "C++-grænseflade til GTK+ »GtkTextView«-kontrollen" -#: gnu/packages/gtk.scm:1146 +#: gnu/packages/gtk.scm:1142 msgid "" "gtksourceviewmm is a portable C++ library that extends the standard GTK+\n" "framework for multiline text editing with support for configurable syntax\n" @@ -6587,41 +6995,41 @@ msgid "" "printing and other features typical of a source code editor." msgstr "" -#: gnu/packages/gtk.scm:1186 +#: gnu/packages/gtk.scm:1172 msgid "Python bindings for cairo" msgstr "Pythonbindinger for cairo" -#: gnu/packages/gtk.scm:1188 +#: gnu/packages/gtk.scm:1174 msgid "Pycairo is a set of Python bindings for the Cairo graphics library." msgstr "Pycairo er et sæt af Pythonbindinger for grafikbiblioteket Cairo." -#: gnu/packages/gtk.scm:1272 +#: gnu/packages/gtk.scm:1247 msgid "Python bindings for GTK+" msgstr "Pythonbindinger for GTK+" -#: gnu/packages/gtk.scm:1274 +#: gnu/packages/gtk.scm:1249 msgid "" "PyGTK allows you to write full featured GTK programs in Python. It is\n" "targeted at GTK 2.x, and can be used in conjunction with gnome-python to\n" "write GNOME applications." msgstr "" -#: gnu/packages/gtk.scm:1298 +#: gnu/packages/gtk.scm:1273 msgid "Perl interface to the cairo 2d vector graphics library" msgstr "Perlgrænseflade til cairo 2D-vektorgrafikbiblioteket" -#: gnu/packages/gtk.scm:1299 +#: gnu/packages/gtk.scm:1274 msgid "" "Cairo provides Perl bindings for the vector graphics library\n" "cairo. It supports multiple output targets, including PNG, PDF and SVG. Cairo\n" "produces identical output on all those targets." msgstr "" -#: gnu/packages/gtk.scm:1324 +#: gnu/packages/gtk.scm:1299 msgid "Perl interface to the 2.x series of the Gimp Toolkit library" msgstr "Perlgrænseflade til 2.x-serien for Gimp Toolkit-biblioteket" -#: gnu/packages/gtk.scm:1325 +#: gnu/packages/gtk.scm:1300 msgid "" "Perl bindings to the 2.x series of the Gtk+ widget set.\n" "This module allows you to write graphical user interfaces in a Perlish and\n" @@ -6629,11 +7037,11 @@ msgid "" "yet remaining very close in spirit to original API." msgstr "" -#: gnu/packages/gtk.scm:1352 +#: gnu/packages/gtk.scm:1327 msgid "Layout and render international text" msgstr "" -#: gnu/packages/gtk.scm:1353 +#: gnu/packages/gtk.scm:1328 msgid "" "Pango is a library for laying out and rendering text, with an\n" "emphasis on internationalization. Pango can be used anywhere that text layout\n" @@ -6650,11 +7058,11 @@ msgid "" "and routines to assist in editing internationalized text." msgstr "" -#: gnu/packages/gtk.scm:1412 +#: gnu/packages/gtk.scm:1381 msgid "Library for minimalistic gtk+3 user interfaces" msgstr "" -#: gnu/packages/gtk.scm:1413 +#: gnu/packages/gtk.scm:1382 msgid "" "Girara is a library that implements a user interface that\n" "focuses on simplicity and minimalism. Currently based on GTK+, a\n" @@ -6665,33 +7073,33 @@ msgid "" "information." msgstr "" -#: gnu/packages/gtk.scm:1480 +#: gnu/packages/gtk.scm:1481 msgid "Documentation generator from C source code" msgstr "" -#: gnu/packages/gtk.scm:1482 +#: gnu/packages/gtk.scm:1483 msgid "" "GTK-Doc generates API documentation from comments added to C code. It is\n" "typically used to document the public API of GTK+ and GNOME libraries, but it\n" "can also be used to document application code." msgstr "" -#: gnu/packages/gtk.scm:1510 +#: gnu/packages/gtk.scm:1511 msgid "Theming engines for GTK+ 2.x" msgstr "" -#: gnu/packages/gtk.scm:1512 +#: gnu/packages/gtk.scm:1513 msgid "" "This package contains the standard GTK+ 2.x theming engines including\n" "Clearlooks, Crux, High Contrast, Industrial, LighthouseBlue, Metal, Mist,\n" "Redmond95 and ThinIce." msgstr "" -#: gnu/packages/gtk.scm:1540 +#: gnu/packages/gtk.scm:1541 msgid "Cairo-based theming engine for GTK+ 2.x" msgstr "" -#: gnu/packages/gtk.scm:1542 +#: gnu/packages/gtk.scm:1543 msgid "" "Murrine is a cairo-based GTK+ theming engine. It is named after the\n" "glass artworks done by Venicians glass blowers." @@ -6729,11 +7137,33 @@ msgid "" "input." msgstr "" -#: gnu/packages/guile.scm:134 gnu/packages/guile.scm:212 +#: gnu/packages/gtk.scm:1659 +msgid "Gtk+ widget for dealing with 2-D tabular data" +msgstr "" + +#: gnu/packages/gtk.scm:1661 +msgid "" +"GNU Spread Sheet Widget is a library for Gtk+ which provides a widget for\n" +"viewing and manipulating 2 dimensional tabular data in a manner similar to many\n" +"popular spread sheet programs." +msgstr "" + +#: gnu/packages/gtk.scm:1702 +msgid "GTK+ dialog boxes for shell scripts" +msgstr "GTK+-dialogbokse for skalskripter" + +#: gnu/packages/gtk.scm:1704 +msgid "" +"This program allows you to display GTK+ dialog boxes from command line or\n" +"shell scripts. Example of how to use @code{yad} can be consulted at\n" +"@url{https://sourceforge.net/p/yad-dialog/wiki/browse_pages/}." +msgstr "" + +#: gnu/packages/guile.scm:141 gnu/packages/guile.scm:220 msgid "Scheme implementation intended especially for extensions" msgstr "" -#: gnu/packages/guile.scm:136 gnu/packages/guile.scm:214 +#: gnu/packages/guile.scm:143 gnu/packages/guile.scm:222 msgid "" "Guile is the GNU Ubiquitous Intelligent Language for Extensions, the\n" "official extension language of the GNU system. It is an implementation of\n" @@ -6742,22 +7172,22 @@ msgid "" "without requiring the source code to be rewritten." msgstr "" -#: gnu/packages/guile.scm:350 +#: gnu/packages/guile.scm:410 msgid "Line editing support for GNU Guile" -msgstr "" +msgstr "Understøttelse af linjeredigering for GNU Guile" -#: gnu/packages/guile.scm:352 +#: gnu/packages/guile.scm:412 msgid "" "This module provides line editing support via the Readline library for\n" "GNU@tie{}Guile. Use the @code{(ice-9 readline)} module and call its\n" "@code{activate-readline} procedure to enable it." msgstr "" -#: gnu/packages/guile.scm:471 +#: gnu/packages/guile.scm:528 msgid "Package manager for Guile" msgstr "Pakkehåndtering for Guile" -#: gnu/packages/guile.scm:473 +#: gnu/packages/guile.scm:530 msgid "" "Guildhall is a package manager written for Guile Scheme. A guild is\n" "an association of independent craftspeople. A guildhall is where they meet.\n" @@ -6771,11 +7201,11 @@ msgid "" "program can be installed in one go." msgstr "" -#: gnu/packages/guile.scm:565 +#: gnu/packages/guile.scm:623 msgid "Web application framework written in Guile" msgstr "" -#: gnu/packages/guile.scm:566 +#: gnu/packages/guile.scm:624 msgid "" "GNU Artanis is a web application framework written in Guile\n" "Scheme. A web application framework (WAF) is a software framework that is\n" @@ -6787,11 +7217,11 @@ msgid "" "more." msgstr "" -#: gnu/packages/guile.scm:592 +#: gnu/packages/guile.scm:650 msgid "Framework for building readers for GNU Guile" msgstr "Ramme til at bygge læsere for GNU Guile" -#: gnu/packages/guile.scm:594 +#: gnu/packages/guile.scm:652 msgid "" "Guile-Reader is a simple framework for building readers for GNU Guile.\n" "\n" @@ -6806,11 +7236,11 @@ msgid "" "many readers as needed)." msgstr "" -#: gnu/packages/guile.scm:648 +#: gnu/packages/guile.scm:706 msgid "Guile bindings to ncurses" msgstr "Guilebindinger til ncurses" -#: gnu/packages/guile.scm:650 +#: gnu/packages/guile.scm:708 msgid "" "guile-ncurses provides Guile language bindings for the ncurses\n" "library." @@ -6818,11 +7248,11 @@ msgstr "" "guile-ncurses tilbyder Guile-sprogbindinger for biblioteket\n" "ncurses." -#: gnu/packages/guile.scm:708 +#: gnu/packages/guile.scm:766 msgid "Run jobs at scheduled times" msgstr "Afvikl job på planlagte tidspunkter" -#: gnu/packages/guile.scm:710 +#: gnu/packages/guile.scm:768 msgid "" "GNU Mcron is a complete replacement for Vixie cron. It is used to run\n" "tasks on a schedule, such as every hour or every Monday. Mcron is written in\n" @@ -6830,11 +7260,23 @@ msgid "" "format is also supported." msgstr "" -#: gnu/packages/guile.scm:752 +#: gnu/packages/guile.scm:836 +msgid "Guile project tooling" +msgstr "" + +#: gnu/packages/guile.scm:838 +msgid "" +"Hall is a command-line application and a set of Guile libraries that\n" +"allow you to quickly create and publish Guile projects. It allows you to\n" +"transparently support the GNU build system, manage a project hierarchy &\n" +"provides tight coupling to Guix." +msgstr "" + +#: gnu/packages/guile.scm:870 msgid "Guile parser library for the iCalendar format" msgstr "Guile-fortolkerbibliotek for iCalendar-formatet" -#: gnu/packages/guile.scm:754 +#: gnu/packages/guile.scm:872 msgid "" "Guile-ICS is an iCalendar (RFC5545) format parser library written in\n" "pure Scheme. The library can be used to read and write iCalendar data.\n" @@ -6842,11 +7284,11 @@ msgid "" "The library is shipped with documentation in Info format and usage examples." msgstr "" -#: gnu/packages/guile.scm:789 +#: gnu/packages/guile.scm:907 msgid "Collection of useful Guile Scheme modules" msgstr "" -#: gnu/packages/guile.scm:791 +#: gnu/packages/guile.scm:909 msgid "" "Guile-Lib is intended as an accumulation place for pure-scheme Guile\n" "modules, allowing for people to cooperate integrating their generic Guile\n" @@ -6854,11 +7296,11 @@ msgid "" "for Guile\"." msgstr "" -#: gnu/packages/guile.scm:832 +#: gnu/packages/guile.scm:944 msgid "JSON module for Guile" msgstr "JSON-modul for Guile" -#: gnu/packages/guile.scm:834 +#: gnu/packages/guile.scm:946 msgid "" "Guile-JSON supports parsing and building JSON documents according to the\n" "specification. These are the main features:\n" @@ -6871,11 +7313,11 @@ msgid "" "@end itemize\n" msgstr "" -#: gnu/packages/guile.scm:921 +#: gnu/packages/guile.scm:982 msgid "MiniKanren declarative logic system, packaged for Guile" msgstr "" -#: gnu/packages/guile.scm:923 +#: gnu/packages/guile.scm:984 msgid "" "MiniKanren is a relational programming extension to the Scheme\n" "programming Language, written as a smaller version of Kanren suitable for\n" @@ -6888,13 +7330,13 @@ msgid "" "See http://minikanren.org/ for more on miniKanren generally." msgstr "" -#: gnu/packages/guile.scm:994 +#: gnu/packages/guile.scm:1020 msgid "" "Minimal implementation of incremental computation in Guile\n" "Scheme" msgstr "" -#: gnu/packages/guile.scm:996 +#: gnu/packages/guile.scm:1022 msgid "" "This package provides a complete Scheme implementation of\n" "miniAdapton, which implements the core functionality of the Adapton system for\n" @@ -6905,51 +7347,51 @@ msgid "" "understand, extend, and port to host languages other than Scheme." msgstr "" -#: gnu/packages/guile.scm:1080 +#: gnu/packages/guile.scm:1064 msgid "S-expression based regular expressions" msgstr "" -#: gnu/packages/guile.scm:1082 +#: gnu/packages/guile.scm:1066 msgid "" "Irregex is an s-expression based alternative to your classic\n" "string-based regular expressions. It implements SRFI 115 and is deeply\n" "inspired by the SCSH regular expression system." msgstr "" -#: gnu/packages/guile.scm:1166 +#: gnu/packages/guile.scm:1120 msgid "Guile bindings to the GDBM library via Guile's FFI" msgstr "" -#: gnu/packages/guile.scm:1168 +#: gnu/packages/guile.scm:1122 msgid "" "Guile bindings to the GDBM key-value storage system, using\n" "Guile's foreign function interface." msgstr "" -#: gnu/packages/guile.scm:1225 +#: gnu/packages/guile.scm:1154 msgid "Access SQLite databases from Guile" msgstr "Tilgå SQLite-databaser fra Guile" -#: gnu/packages/guile.scm:1227 +#: gnu/packages/guile.scm:1156 msgid "This package provides Guile bindings to the SQLite database system." msgstr "Denne pakke tilbyder Guilebindinger til SQLite-databasesystemet." -#: gnu/packages/guile.scm:1275 +#: gnu/packages/guile.scm:1219 msgid "Functional static site generator" msgstr "" -#: gnu/packages/guile.scm:1276 +#: gnu/packages/guile.scm:1220 msgid "" "Haunt is a static site generator written in Guile\n" "Scheme. Haunt features a functional build system and an extensible\n" "interface for reading articles in any format." msgstr "" -#: gnu/packages/guile.scm:1314 -msgid "Guile application configuration parsing library" +#: gnu/packages/guile.scm:1252 +msgid "Guile application configuration parsing library." msgstr "" -#: gnu/packages/guile.scm:1316 +#: gnu/packages/guile.scm:1254 msgid "" "Guile Config is a library providing a declarative approach to\n" "application configuration specification. The library provides clean\n" @@ -6960,43 +7402,43 @@ msgid "" "above command-line parameters." msgstr "" -#: gnu/packages/guile.scm:1354 +#: gnu/packages/guile.scm:1282 msgid "Redis client library for Guile" msgstr "" -#: gnu/packages/guile.scm:1355 +#: gnu/packages/guile.scm:1283 msgid "" "Guile-redis provides a Scheme interface to the Redis\n" "key-value cache and store." msgstr "" -#: gnu/packages/guile.scm:1429 +#: gnu/packages/guile.scm:1360 msgid "Whitespace to lisp syntax for Guile" msgstr "" -#: gnu/packages/guile.scm:1430 +#: gnu/packages/guile.scm:1361 msgid "" "Wisp is a syntax for Guile which provides a Python-like\n" "whitespace-significant language. It may be easier on the eyes for some\n" "users and in some situations." msgstr "" -#: gnu/packages/guile.scm:1480 +#: gnu/packages/guile.scm:1412 msgid "2D/3D game engine for GNU Guile" msgstr "" -#: gnu/packages/guile.scm:1481 +#: gnu/packages/guile.scm:1413 msgid "" "Sly is a 2D/3D game engine written in Guile Scheme. Sly\n" "features a functional reactive programming interface and live coding\n" "capabilities." msgstr "" -#: gnu/packages/guile.scm:1517 +#: gnu/packages/guile.scm:1449 msgid "Generate C bindings for Guile" msgstr "" -#: gnu/packages/guile.scm:1518 +#: gnu/packages/guile.scm:1450 msgid "" "G-Wrap is a tool and Guile library for generating function\n" "wrappers for inter-language calls. It currently only supports generating Guile\n" @@ -7005,11 +7447,11 @@ msgid "" "provides access to that interface and its types from the Scheme level." msgstr "" -#: gnu/packages/guile.scm:1555 +#: gnu/packages/guile.scm:1492 msgid "Guile database abstraction layer" msgstr "Guile-databaseabstraktionslag" -#: gnu/packages/guile.scm:1558 +#: gnu/packages/guile.scm:1495 msgid "" "guile-dbi is a library for Guile that provides a convenient interface to\n" "SQL databases. Database programming with guile-dbi is generic in that the same\n" @@ -7017,54 +7459,54 @@ msgid "" "It currently supports MySQL, Postgres and SQLite3." msgstr "" -#: gnu/packages/guile.scm:1584 +#: gnu/packages/guile.scm:1529 msgid "Guile DBI driver for SQLite" msgstr "Guile DBI-driver for SQLite" -#: gnu/packages/guile.scm:1587 +#: gnu/packages/guile.scm:1532 msgid "" "guile-dbi is a library for Guile that provides a convenient interface to\n" "SQL databases. This package implements the interface for SQLite." msgstr "" -#: gnu/packages/guile.scm:1633 +#: gnu/packages/guile.scm:1575 msgid "DSV module for Guile" msgstr "DSV-modul for Guile" -#: gnu/packages/guile.scm:1635 +#: gnu/packages/guile.scm:1577 msgid "" "Guile-DSV is a GNU Guile module for working with the\n" "delimiter-separated values (DSV) data format. Guile-DSV supports the\n" "Unix-style DSV format and RFC 4180 format." msgstr "" -#: gnu/packages/guile.scm:1662 +#: gnu/packages/guile.scm:1604 msgid "XOSD bindings for Guile" msgstr "XOSD-bindinger for Guile" -#: gnu/packages/guile.scm:1664 +#: gnu/packages/guile.scm:1606 msgid "" "Guile-XOSD provides Guile bindings for @code{libxosd},\n" "@uref{http://sourceforge.net/projects/libxosd/, the X On Screen Display\n" "library}." msgstr "" -#: gnu/packages/guile.scm:1687 +#: gnu/packages/guile.scm:1629 msgid "Evaluate code in a running Guile process" msgstr "Evaluer kode i en kørende Guileproces" -#: gnu/packages/guile.scm:1689 +#: gnu/packages/guile.scm:1631 msgid "" "Guile-Daemon is a small Guile program that loads your initial\n" "configuration file, and then reads and evaluates Guile expressions that\n" "you send to a FIFO file." msgstr "" -#: gnu/packages/guile.scm:1720 +#: gnu/packages/guile.scm:1665 msgid "CommonMark parser for Guile" msgstr "CommonMark-fortolker for Guile" -#: gnu/packages/guile.scm:1722 +#: gnu/packages/guile.scm:1667 msgid "" "guile-commonmark is a library for parsing CommonMark, a fully specified\n" "variant of Markdown. The library is written in Guile Scheme and is designed\n" @@ -7073,11 +7515,11 @@ msgid "" "is no support for parsing block and inline level HTML." msgstr "" -#: gnu/packages/guile.scm:1753 +#: gnu/packages/guile.scm:1698 msgid "Structured access to bytevector contents for Guile" msgstr "" -#: gnu/packages/guile.scm:1755 +#: gnu/packages/guile.scm:1700 msgid "" "Guile bytestructures offers a system imitating the type system\n" "of the C programming language, to be used on bytevectors. C's type\n" @@ -7086,21 +7528,21 @@ msgid "" "type system, elevating types to first-class status." msgstr "" -#: gnu/packages/guile.scm:1799 +#: gnu/packages/guile.scm:1744 msgid "Spell-checking from Guile" msgstr "" -#: gnu/packages/guile.scm:1801 +#: gnu/packages/guile.scm:1746 msgid "" "guile-aspell is a Guile Scheme library for comparing a string against a\n" "dictionary and suggesting spelling corrections." msgstr "" -#: gnu/packages/guile.scm:1855 +#: gnu/packages/guile.scm:1795 msgid "Extend Bash using Guile" msgstr "" -#: gnu/packages/guile.scm:1857 +#: gnu/packages/guile.scm:1797 #, scheme-format msgid "" "Guile-Bash provides a shared library and set of Guile modules,\n" @@ -7125,11 +7567,11 @@ msgid "" "and then run @command{scm example.scm}." msgstr "" -#: gnu/packages/guile.scm:1904 +#: gnu/packages/guile.scm:1844 msgid "Asynchronous actor model library for Guile" msgstr "" -#: gnu/packages/guile.scm:1906 +#: gnu/packages/guile.scm:1846 msgid "" "GNU 8sync (pronounced \"eight-sync\") is an asynchronous programming\n" "library for GNU Guile based on the actor model.\n" @@ -7137,11 +7579,11 @@ msgid "" "Note that 8sync is only available for Guile 2.2." msgstr "" -#: gnu/packages/guile.scm:1929 +#: gnu/packages/guile.scm:1883 msgid "Lightweight concurrency facility for Guile" msgstr "" -#: gnu/packages/guile.scm:1931 +#: gnu/packages/guile.scm:1885 msgid "" "Fibers is a Guile library that implements a a lightweight concurrency\n" "facility, inspired by systems like Concurrent ML, Go, and Erlang. A fiber is\n" @@ -7155,11 +7597,11 @@ msgid "" "is not available for Guile 2.0." msgstr "" -#: gnu/packages/guile.scm:1987 +#: gnu/packages/guile.scm:1922 msgid "Guile bindings for libgit2" msgstr "Guilebindinger for libgit2" -#: gnu/packages/guile.scm:1989 +#: gnu/packages/guile.scm:1924 msgid "" "This package provides Guile bindings to libgit2, a library to\n" "manipulate repositories of the Git version control system." @@ -7167,11 +7609,11 @@ msgstr "" "Denne pakke tilbyder Guilebindinger til libgit2, et bibliotek\n" "til at manipulere arkiver i versionskontrolsystemet Git." -#: gnu/packages/guile.scm:2014 +#: gnu/packages/guile.scm:1949 msgid "General-purpose syntax highlighter for GNU Guile" msgstr "" -#: gnu/packages/guile.scm:2015 +#: gnu/packages/guile.scm:1950 msgid "" "Guile-syntax-highlight is a general-purpose syntax\n" "highlighting library for GNU Guile. It can parse code written in various\n" @@ -7179,29 +7621,132 @@ msgid "" "HTML (via SXML) or any other format for rendering." msgstr "" -#: gnu/packages/guile.scm:2046 +#: gnu/packages/guile.scm:1976 msgid "S-expression based json reader/writer for Guile" msgstr "S-udtryksbaseret json læser/skriver for Guile" -#: gnu/packages/guile.scm:2047 +#: gnu/packages/guile.scm:1977 msgid "" "guile-sjson is a json reader/writer for Guile.\n" "It has a nice, simple s-expression based syntax." msgstr "" -#: gnu/packages/guile.scm:2091 +#: gnu/packages/guile.scm:1997 msgid "Colorized REPL for Guile" msgstr "" -#: gnu/packages/guile.scm:2093 +#: gnu/packages/guile.scm:1999 msgid "Guile-colorized provides you with a colorized REPL for GNU Guile." msgstr "" -#: gnu/packages/imagemagick.scm:110 gnu/packages/imagemagick.scm:211 +#: gnu/packages/guile.scm:2054 +msgid "Purely functional data structures for Guile" +msgstr "" + +#: gnu/packages/guile.scm:2056 +msgid "" +"This package provides purely functional data structures written in R6RS\n" +"Scheme and compiled for Guile. It has been tested with Racket, Guile 2,\n" +"Vicare Scheme and IronScheme. Right now it contains:\n" +"\n" +"@itemize\n" +"@item queues\n" +"@item deques\n" +"@item bbtrees\n" +"@item sets\n" +"@item dlists\n" +"@item priority search queues (PSQs)\n" +"@item finger trees\n" +"@item sequences\n" +"@item heaps\n" +"@item hash array mapped tries (HAMTs).\n" +"@end itemize\n" +msgstr "" + +#: gnu/packages/guile.scm:2089 +msgid "AA tree data structure for Guile" +msgstr "AA-trædatastruktur for Guile" + +#: gnu/packages/guile.scm:2091 +msgid "" +"This package provides an implementation of @dfn{AA trees}, a\n" +"self-balancing binary tree data structure, for Guile. It ensure @math{O(log\n" +"n)} worst case performance for core operations. The module provides\n" +"non-mutating insert, delete, and search operations, with support for\n" +"convenient nested tree operations." +msgstr "" + +#: gnu/packages/guile.scm:2130 +msgid "Guile wrapper over ZeroMQ library" +msgstr "Guile-omslag over ZeroMQ-biblioteket" + +#: gnu/packages/guile.scm:2132 +msgid "" +"This package provides a Guile programming interface to the ZeroMQ\n" +"messaging library." +msgstr "" +"Denne pakke tilbyder en Guileprogrammeringsgrænseflade til ZeroMQ\n" +"beskedbiblioteket." + +#: gnu/packages/guile.scm:2218 +msgid "Guile kernel for the Jupyter Notebook" +msgstr "Guilekerne for Jupyter Notebook" + +#: gnu/packages/guile.scm:2220 +msgid "" +"This package provides a Guile 2.x kernel for the Jupyter Notebook. It\n" +"allows users to interact with the Guile REPL through Jupyter." +msgstr "" + +#: gnu/packages/guile.scm:2243 +msgid "SPARQL module for Guile" +msgstr "SPARQL-modul for Guile" + +#: gnu/packages/guile.scm:2244 +msgid "" +"This package provides the functionality to query a SPARQL\n" +"endpoint. Additionally, it provides an interface to write SPARQL queries\n" +"using S-expressions." +msgstr "" + +#: gnu/packages/guile.scm:2270 +msgid "Guile interface to the Debbugs bug tracking service" +msgstr "" + +#: gnu/packages/guile.scm:2272 +msgid "" +"This package provides a Guile library to communicate with a Debbugs bug\n" +"tracker's SOAP service, such as @url{https://bugs.gnu.org}." +msgstr "" + +#: gnu/packages/guile.scm:2300 +msgid "Guile email parser" +msgstr "Guile-e-postfortolker" + +#: gnu/packages/guile.scm:2301 +msgid "" +"This package provides an email parser written in pure\n" +"Guile." +msgstr "" +"Denne pakke tilbyder en e-postfortolker skrevet i ren \n" +"Guile." + +#: gnu/packages/guile.scm:2357 +msgid "Guile bindings to Newt" +msgstr "Guilebindinger til Newt" + +#: gnu/packages/guile.scm:2359 +msgid "" +"This package provides bindings for Newt, a programming library for\n" +"color text mode, widget based user interfaces. The bindings are written in pure\n" +"Scheme by using Guile’s foreign function interface." +msgstr "" + +#: gnu/packages/imagemagick.scm:113 gnu/packages/imagemagick.scm:216 msgid "Create, edit, compose, or convert bitmap images" msgstr "Opret, rediger, komponer eller konverter bitmap-billeder" -#: gnu/packages/imagemagick.scm:112 +#: gnu/packages/imagemagick.scm:115 msgid "" "ImageMagick is a software suite to create, edit, compose, or convert\n" "bitmap images. It can read and write images in a variety of formats (over 100)\n" @@ -7211,11 +7756,11 @@ msgid "" "text, lines, polygons, ellipses and Bézier curves." msgstr "" -#: gnu/packages/imagemagick.scm:157 +#: gnu/packages/imagemagick.scm:162 msgid "Perl interface to ImageMagick" msgstr "Perlgrænseflade til ImageMagick" -#: gnu/packages/imagemagick.scm:158 +#: gnu/packages/imagemagick.scm:163 msgid "" "This Perl extension allows the reading, manipulation and\n" "writing of a large number of image file formats using the ImageMagick library.\n" @@ -7223,94 +7768,112 @@ msgid "" "script." msgstr "" -#: gnu/packages/imagemagick.scm:213 +#: gnu/packages/imagemagick.scm:218 msgid "" "GraphicsMagick provides a comprehensive collection of utilities,\n" "programming interfaces, and GUIs, to support file format conversion, image\n" "processing, and 2D vector rendering." msgstr "" -#: gnu/packages/image.scm:97 +#: gnu/packages/image.scm:103 msgid "Library for handling PNG files" msgstr "Bibliotek for håndtering af PNG-filer" -#: gnu/packages/image.scm:99 +#: gnu/packages/image.scm:105 msgid "" "Libpng is the official PNG (Portable Network Graphics) reference\n" "library. It supports almost all PNG features and is extensible." msgstr "" -#: gnu/packages/image.scm:163 +#: gnu/packages/image.scm:169 msgid "APNG patch for libpng" -msgstr "" +msgstr "APNG-rettelse for libpng" -#: gnu/packages/image.scm:165 +#: gnu/packages/image.scm:171 msgid "" "APNG (Animated Portable Network Graphics) is an unofficial\n" "extension of the APNG (Portable Network Graphics) format.\n" "APNG patch provides APNG support to libpng." msgstr "" -#: gnu/packages/image.scm:205 +#: gnu/packages/image.scm:211 msgid "Read and write PNG images" -msgstr "" +msgstr "Læs og skriv PNG-billeder" -#: gnu/packages/image.scm:207 +#: gnu/packages/image.scm:213 msgid "" "This package provides an easy and simple way to read, write and display\n" "bitmap images stored in the PNG format. It can read and write both files and\n" "in-memory raw vectors." msgstr "" -#: gnu/packages/image.scm:242 +#: gnu/packages/image.scm:248 msgid "Utility to compress PNG files" msgstr "Redskab til at komprimere PNG-filer" -#: gnu/packages/image.scm:243 +#: gnu/packages/image.scm:249 msgid "" "pngcrusqh is an optimizer for PNG (Portable Network Graphics)\n" "files. It can compress them as much as 40% losslessly." msgstr "" -#: gnu/packages/image.scm:262 +#: gnu/packages/image.scm:307 +msgid "Pretty small png library" +msgstr "Meget lille png-bibliotek" + +#: gnu/packages/image.scm:308 +msgid "" +"A pretty small png library.\n" +"Currently all documentation resides in @file{pnglite.h}." +msgstr "" + +#: gnu/packages/image.scm:323 msgid "Library for handling JPEG files" msgstr "Bibliotek for håndtering af JPEG-filer" -#: gnu/packages/image.scm:264 +#: gnu/packages/image.scm:325 msgid "" "Libjpeg implements JPEG image encoding, decoding, and transcoding.\n" "JPEG is a standardized compression method for full-color and gray-scale\n" "images.\n" -"The included programs provide conversion between the JPEG format and\n" -"image files in PBMPLUS PPM/PGM, GIF, BMP, and Targa file formats." +"It also includes programs that provide conversion between the JPEG format and\n" +"image files in PBMPLUS PPM/PGM, GIF, BMP, and Targa file formats, as well as\n" +"lossless JPEG manipulations such as rotation, scaling or cropping:\n" +"@enumerate\n" +"@item cjpeg\n" +"@item djpeg\n" +"@item jpegtran\n" +"@item rdjpgcom\n" +"@item wrjpgcom\n" +"@end enumerate" msgstr "" -#: gnu/packages/image.scm:329 +#: gnu/packages/image.scm:398 msgid "Implementation of the JPEG XR standard" -msgstr "" +msgstr "Implementering af JPEG XR-standarden" -#: gnu/packages/image.scm:330 +#: gnu/packages/image.scm:399 msgid "" "JPEG XR is an approved ISO/IEC International standard (its\n" "official designation is ISO/IEC 29199-2). This library is an implementation of that standard." msgstr "" -#: gnu/packages/image.scm:353 +#: gnu/packages/image.scm:421 msgid "Optimize JPEG images" msgstr "Optimer JPEG-billeder" -#: gnu/packages/image.scm:355 +#: gnu/packages/image.scm:423 msgid "" "jpegoptim provides lossless optimization (based on optimizing\n" "the Huffman tables) and \"lossy\" optimization based on setting\n" "maximum quality factor." msgstr "" -#: gnu/packages/image.scm:380 +#: gnu/packages/image.scm:448 msgid "Library for handling Mac OS icns resource files" msgstr "Bibliotek for håndtering af Mac OS-ikonressourcefiler" -#: gnu/packages/image.scm:382 +#: gnu/packages/image.scm:450 msgid "" "Libicns is a library for the manipulation of Mac OS IconFamily resource\n" "type files (ICNS). @command{icns2png} and @command{png2icns} are provided to\n" @@ -7320,11 +7883,11 @@ msgid "" "extracting icontainer icon files." msgstr "" -#: gnu/packages/image.scm:416 +#: gnu/packages/image.scm:486 msgid "Library for handling TIFF files" msgstr "Bibliotek for håndtering af TIFF-filer" -#: gnu/packages/image.scm:418 +#: gnu/packages/image.scm:488 msgid "" "Libtiff provides support for the Tag Image File Format (TIFF), a format\n" "used for storing image data.\n" @@ -7332,11 +7895,11 @@ msgid "" "collection of tools for doing simple manipulations of TIFF images." msgstr "" -#: gnu/packages/image.scm:481 +#: gnu/packages/image.scm:551 msgid "Library and tools for image processing and analysis" msgstr "Bibliotek og værktøjer for billedbehandling og analyse" -#: gnu/packages/image.scm:483 +#: gnu/packages/image.scm:553 msgid "" "Leptonica is a C library and set of command-line tools for efficient\n" "image processing and image analysis operations. It supports rasterop, affine\n" @@ -7346,11 +7909,11 @@ msgid "" "arithmetic ops." msgstr "" -#: gnu/packages/image.scm:504 +#: gnu/packages/image.scm:576 msgid "Decoder of the JBIG2 image compression format" msgstr "" -#: gnu/packages/image.scm:506 +#: gnu/packages/image.scm:578 msgid "" "JBIG2 is designed for lossy or lossless encoding of 'bilevel' (1-bit\n" "monochrome) images at moderately high resolution, and in particular scanned\n" @@ -7363,11 +7926,11 @@ msgid "" "work." msgstr "" -#: gnu/packages/image.scm:541 +#: gnu/packages/image.scm:628 msgid "JPEG 2000 codec" msgstr "JPEG 2000-kodning" -#: gnu/packages/image.scm:543 +#: gnu/packages/image.scm:630 msgid "" "The OpenJPEG library is a JPEG 2000 codec written in C. It has\n" "been developed in order to promote the use of JPEG 2000, the new\n" @@ -7380,11 +7943,11 @@ msgid "" "error-resilience, a Java-viewer for j2k-images, ..." msgstr "" -#: gnu/packages/image.scm:608 +#: gnu/packages/image.scm:697 msgid "Tools and library for working with GIF images" msgstr "Værktøjer og bibliotek for arbejde med GIF-billeder" -#: gnu/packages/image.scm:610 +#: gnu/packages/image.scm:699 msgid "" "GIFLIB is a library for reading and writing GIF images. It is API and\n" "ABI compatible with libungif which was in wide use while the LZW compression\n" @@ -7392,19 +7955,19 @@ msgid "" "compose, and analyze GIF images." msgstr "" -#: gnu/packages/image.scm:632 +#: gnu/packages/image.scm:721 msgid "GIF decompression library" msgstr "GIF-dekomprimeringsbibliotek" -#: gnu/packages/image.scm:634 +#: gnu/packages/image.scm:723 msgid "libungif is the old GIF decompression library by the GIFLIB project." msgstr "libungif er det gamle GIF-dekomprimeringsbibliotek af GIFLIB-projektet." -#: gnu/packages/image.scm:663 +#: gnu/packages/image.scm:752 msgid "Loading, saving, rendering and manipulating image files" msgstr "Indlæs, gem, optegn og manipuler billedfiler" -#: gnu/packages/image.scm:665 +#: gnu/packages/image.scm:754 msgid "" "Imlib2 is a library that does image file loading and saving as well as\n" "rendering, manipulation, arbitrary polygon support, etc.\n" @@ -7417,32 +7980,32 @@ msgid "" "more modular, simple, and flexible." msgstr "" -#: gnu/packages/image.scm:697 +#: gnu/packages/image.scm:786 msgid "Wrapper library for imlib2" msgstr "Omslagsbibliotek for imlib2" -#: gnu/packages/image.scm:699 +#: gnu/packages/image.scm:788 msgid "" "Giblib is a simple library which wraps imlib2's context API, avoiding\n" "all the context_get/set calls, adds fontstyles to the truetype renderer and\n" "supplies a generic doubly-linked list and some string functions." msgstr "" -#: gnu/packages/image.scm:780 +#: gnu/packages/image.scm:869 msgid "Library for handling popular graphics image formats" msgstr "Bibliotek til håndtering af populære grafiske billedformater" -#: gnu/packages/image.scm:782 +#: gnu/packages/image.scm:871 msgid "" "FreeImage is a library for developers who would like to support popular\n" "graphics image formats like PNG, BMP, JPEG, TIFF and others." msgstr "" -#: gnu/packages/image.scm:837 +#: gnu/packages/image.scm:933 msgid "Computer vision library" msgstr "" -#: gnu/packages/image.scm:839 +#: gnu/packages/image.scm:935 msgid "" "VIGRA stands for Vision with Generic Algorithms. It is an image\n" "processing and analysis library that puts its main emphasis on customizable\n" @@ -7450,11 +8013,22 @@ msgid "" "multi-dimensional image processing." msgstr "" -#: gnu/packages/image.scm:881 +#: gnu/packages/image.scm:968 +msgid "C interface to the VIGRA computer vision library" +msgstr "C-grænseflade til VIGRA-computervisionbiblioteket" + +#: gnu/packages/image.scm:970 +msgid "" +"This package provides a C interface to the VIGRA C++ computer vision\n" +"library. It is designed primarily to ease the implementation of higher-level\n" +"language bindings to VIGRA." +msgstr "" + +#: gnu/packages/image.scm:1010 msgid "Lossless and lossy image compression" msgstr "Billedkomprimering med og uden kvalitetetstab" -#: gnu/packages/image.scm:883 +#: gnu/packages/image.scm:1012 msgid "" "WebP is a new image format that provides lossless and lossy compression\n" "for images. WebP lossless images are 26% smaller in size compared to\n" @@ -7466,52 +8040,52 @@ msgid "" "channels." msgstr "" -#: gnu/packages/image.scm:911 +#: gnu/packages/image.scm:1040 msgid "Library for handling MNG files" msgstr "Bibliotek for håndtering af MNG-filer" -#: gnu/packages/image.scm:913 +#: gnu/packages/image.scm:1042 msgid "Libmng is the MNG (Multiple-image Network Graphics) reference library." msgstr "Libmng er MNG-referencebiblioteket (Multiple-image Network Graphics)." -#: gnu/packages/image.scm:941 +#: gnu/packages/image.scm:1070 msgid "Library and command-line utility to manage image metadata" msgstr "Bibliotek og kommandolinjeredskab til at håndtere billedmetadata" -#: gnu/packages/image.scm:943 +#: gnu/packages/image.scm:1072 msgid "" "Exiv2 is a C++ library and a command line utility to manage image\n" "metadata. It provides fast and easy read and write access to the Exif, IPTC\n" "and XMP metadata of images in various formats." msgstr "" -#: gnu/packages/image.scm:983 +#: gnu/packages/image.scm:1112 msgid "Library for manipulating many image formats" msgstr "Bibliotek for manipulering af mange billedformater" -#: gnu/packages/image.scm:984 +#: gnu/packages/image.scm:1113 msgid "" "Developer's Image Library (DevIL) is a library to develop\n" "applications with support for many types of images. DevIL can load, save,\n" "convert, manipulate, filter and display a wide variety of image formats." msgstr "" -#: gnu/packages/image.scm:1004 +#: gnu/packages/image.scm:1133 msgid "JPEG-2000 library" msgstr "JPEG-2000-bibliotek" -#: gnu/packages/image.scm:1005 +#: gnu/packages/image.scm:1134 msgid "" "The JasPer Project is an initiative to provide a reference\n" "implementation of the codec specified in the JPEG-2000 Part-1 standard (i.e.,\n" "ISO/IEC 15444-1)." msgstr "" -#: gnu/packages/image.scm:1035 +#: gnu/packages/image.scm:1164 msgid "Scaling, colorspace conversion, and dithering library" msgstr "" -#: gnu/packages/image.scm:1036 +#: gnu/packages/image.scm:1165 msgid "" "Zimg implements the commonly required image processing basics\n" "of scaling, colorspace conversion, and depth conversion. A simple API enables\n" @@ -7519,11 +8093,11 @@ msgid "" "the programmer." msgstr "" -#: gnu/packages/image.scm:1069 +#: gnu/packages/image.scm:1198 msgid "Perceptual image comparison utility" msgstr "" -#: gnu/packages/image.scm:1070 +#: gnu/packages/image.scm:1199 msgid "" "PerceptualDiff visually compares two images to determine\n" "whether they look alike. It uses a computational model of the human visual\n" @@ -7531,33 +8105,33 @@ msgid "" "differences in file encoding, image quality, and other small variations." msgstr "" -#: gnu/packages/image.scm:1110 +#: gnu/packages/image.scm:1239 msgid "Image and audio steganography" msgstr "" -#: gnu/packages/image.scm:1112 +#: gnu/packages/image.scm:1241 msgid "" "Steghide is a program to hide data in various kinds of image and audio\n" "files (known as @dfn{steganography}). Neither color nor sample frequencies are\n" "changed, making the embedding resistant against first-order statistical tests." msgstr "" -#: gnu/packages/image.scm:1137 +#: gnu/packages/image.scm:1266 msgid "Image library for Extempore" msgstr "Billedbibliotek for Extempore" -#: gnu/packages/image.scm:1139 +#: gnu/packages/image.scm:1268 msgid "" "This package is a collection of assorted single-file libraries. Of\n" "all included libraries only the image loading and decoding library is\n" "installed as @code{stb_image}." msgstr "" -#: gnu/packages/image.scm:1168 +#: gnu/packages/image.scm:1305 msgid "Optimizer that recompresses PNG image files to a smaller size" msgstr "" -#: gnu/packages/image.scm:1169 +#: gnu/packages/image.scm:1306 msgid "" "OptiPNG is a PNG optimizer that recompresses image\n" "files to a smaller size, without losing any information. This program\n" @@ -7565,11 +8139,11 @@ msgid "" "PNG, and performs PNG integrity checks and corrections." msgstr "" -#: gnu/packages/image.scm:1194 +#: gnu/packages/image.scm:1331 msgid "SIMD-accelerated JPEG image handling library" msgstr "SIMD-accelereret JPEG-billedbehandlingsbibliotek" -#: gnu/packages/image.scm:1195 +#: gnu/packages/image.scm:1332 msgid "" "libjpeg-turbo is a JPEG image codec that accelerates baseline\n" "JPEG compression and decompression using SIMD instructions: MMX on x86, SSE2 on\n" @@ -7582,11 +8156,11 @@ msgid "" "and decompress to 32-bit and big-endian pixel buffers (RGBX, XBGR, etc.)." msgstr "" -#: gnu/packages/image.scm:1243 +#: gnu/packages/image.scm:1382 msgid "Library for reading and writing files in the nifti-1 format" msgstr "Bibliotek til at læse og skrive filer i nifti-1-formatet" -#: gnu/packages/image.scm:1244 +#: gnu/packages/image.scm:1383 msgid "" "Niftilib is a set of i/o libraries for reading and writing\n" "files in the nifti-1 data format - a binary file format for storing\n" @@ -7594,32 +8168,32 @@ msgid "" "(fMRI) brain images." msgstr "" -#: gnu/packages/image.scm:1283 +#: gnu/packages/image.scm:1422 msgid "Color picker" msgstr "Farvevælger" -#: gnu/packages/image.scm:1284 +#: gnu/packages/image.scm:1423 msgid "Gpick is an advanced color picker and palette editing tool." msgstr "Gpick er en avanceret farvevælger og paletredigeringsværktøj." -#: gnu/packages/image.scm:1300 +#: gnu/packages/image.scm:1441 msgid "IPTC metadata manipulation library" msgstr "IPTCmetadatamanipuleringsbibliotek" -#: gnu/packages/image.scm:1301 +#: gnu/packages/image.scm:1443 msgid "" -"Libiptcdata is a C library for manipulating the International\n" -"Press Telecommunications Council (IPTC) metadata stored within multimedia files\n" +"Libiptcdata is a C library for manipulating the International Press\n" +"Telecommunications Council (@dfn{IPTC}) metadata stored within multimedia files\n" "such as images. This metadata can include captions and keywords, often used by\n" "popular photo management applications. The library provides routines for\n" "parsing, viewing, modifying, and saving this metadata." msgstr "" -#: gnu/packages/image.scm:1337 +#: gnu/packages/image.scm:1479 msgid "Powerful yet simple to use screenshot software" msgstr "" -#: gnu/packages/image.scm:1338 +#: gnu/packages/image.scm:1480 msgid "" "Flameshot is a screenshot program.\n" "Features:\n" @@ -7633,22 +8207,53 @@ msgid "" "@end itemize\n" msgstr "" -#: gnu/packages/image.scm:1364 +#: gnu/packages/image.scm:1506 msgid "Read and write JPEG images with R" msgstr "" -#: gnu/packages/image.scm:1365 +#: gnu/packages/image.scm:1507 msgid "" "This package provides a way to read, write and display bitmap\n" "images stored in the JPEG format with R. It can read and write both files and\n" "in-memory raw vectors." msgstr "" -#: gnu/packages/image-viewers.scm:90 +#: gnu/packages/image.scm:1541 +msgid "Edit GIF images and animations" +msgstr "" + +#: gnu/packages/image.scm:1542 +msgid "" +"Gifsicle is a command-line GIF image manipulation tool that:\n" +"\n" +"@itemize\n" +"@item Provides a batch mode for changing GIFs in place.\n" +"@item Prints detailed information about GIFs, including comments.\n" +"@item Control over interlacing, comments, looping, transparency, etc.\n" +"@item Creates well-behaved GIFs: removes redundant colors, only uses local color\n" +"tables, etc.\n" +"@item Shrinks colormaps and change images to use the Web-safe palette.\n" +"@item Optimizes GIF animations, or unoptimizes them for easier editing.\n" +"@end itemize\n" +"\n" +"Two other programs are included with Gifsicle: @command{gifview} is a\n" +"lightweight animated-GIF viewer, and @command{gifdiff} compares two GIFs for\n" +"identical visual appearance." +msgstr "" + +#: gnu/packages/image.scm:1581 +msgid "Convert JPEG images to ASCII" +msgstr "" + +#: gnu/packages/image.scm:1583 +msgid "Jp2a is a small utility that converts JPEG images to ASCII." +msgstr "" + +#: gnu/packages/image-viewers.scm:93 msgid "Fast and light imlib2-based image viewer" msgstr "Hurtig og simpel imlib2-baseret billedfremviser" -#: gnu/packages/image-viewers.scm:92 +#: gnu/packages/image-viewers.scm:95 msgid "" "feh is an X11 image viewer aimed mostly at console users.\n" "Unlike most other viewers, it does not have a fancy GUI, but simply\n" @@ -7657,11 +8262,11 @@ msgid "" "actions." msgstr "" -#: gnu/packages/image-viewers.scm:153 +#: gnu/packages/image-viewers.scm:156 msgid "Lightweight GTK+ based image viewer" msgstr "" -#: gnu/packages/image-viewers.scm:155 +#: gnu/packages/image-viewers.scm:158 msgid "" "Geeqie is a lightweight GTK+ based image viewer for Unix like operating\n" "systems. It features: EXIF, IPTC and XMP metadata browsing and editing\n" @@ -7671,21 +8276,21 @@ msgid "" "collection. Geeqie was initially based on GQview." msgstr "" -#: gnu/packages/image-viewers.scm:180 +#: gnu/packages/image-viewers.scm:183 msgid "Simple and fast image viewer for X" msgstr "Simpel og hurtig billedfremviser for X" -#: gnu/packages/image-viewers.scm:181 +#: gnu/packages/image-viewers.scm:184 msgid "" "gpicview is a lightweight GTK+ 2.x based image viewer.\n" "It is the default image viewer on LXDE desktop environment." msgstr "" -#: gnu/packages/image-viewers.scm:222 +#: gnu/packages/image-viewers.scm:225 msgid "Simple X Image Viewer" msgstr "Simpel X-billedfremviser" -#: gnu/packages/image-viewers.scm:224 +#: gnu/packages/image-viewers.scm:227 msgid "" "sxiv is an alternative to feh and qiv. Its primary goal is to\n" "provide the most basic features required for fast image viewing. It has\n" @@ -7694,11 +8299,11 @@ msgid "" "it and customize it for your needs." msgstr "" -#: gnu/packages/image-viewers.scm:271 +#: gnu/packages/image-viewers.scm:267 msgid "Simple, fast and elegant image viewer" msgstr "Simpel, hurtig og elegant billedfremviser" -#: gnu/packages/image-viewers.scm:272 +#: gnu/packages/image-viewers.scm:268 msgid "" "Viewnior is an image viewer program. Created to be simple,\n" "fast and elegant. Its minimalistic interface provides more screenspace for\n" @@ -7716,21 +8321,21 @@ msgid "" "@end enumerate\n" msgstr "" -#: gnu/packages/image-viewers.scm:340 +#: gnu/packages/image-viewers.scm:336 msgid "Render images in the terminal" msgstr "" -#: gnu/packages/image-viewers.scm:342 +#: gnu/packages/image-viewers.scm:338 msgid "" "Catimg is a little program that prints images in the terminal.\n" "It supports JPEG, PNG and GIF formats." msgstr "" -#: gnu/packages/image-viewers.scm:393 +#: gnu/packages/image-viewers.scm:389 msgid "High dynamic range (HDR) imaging application" msgstr "" -#: gnu/packages/image-viewers.scm:395 +#: gnu/packages/image-viewers.scm:391 msgid "" "Luminance HDR (formerly QtPFSGui) is a graphical user interface\n" "application that aims to provide a workflow for high dynamic range (HDR)\n" @@ -7746,22 +8351,22 @@ msgid "" "@end itemize\n" msgstr "" -#: gnu/packages/image-viewers.scm:443 +#: gnu/packages/image-viewers.scm:439 msgid "Image viewer for comics" msgstr "" -#: gnu/packages/image-viewers.scm:444 +#: gnu/packages/image-viewers.scm:440 msgid "" "MComix is a customizable image viewer that specializes as\n" "a comic and manga reader. It supports a variety of container formats\n" "including CBZ, CB7, CBT, LHA." msgstr "" -#: gnu/packages/inkscape.scm:86 +#: gnu/packages/inkscape.scm:91 msgid "Vector graphics editor" msgstr "Redigeringsprogram for vektorgrafik" -#: gnu/packages/inkscape.scm:87 +#: gnu/packages/inkscape.scm:92 msgid "" "Inkscape is a vector graphics editor. What sets Inkscape\n" "apart is its use of Scalable Vector Graphics (SVG), an XML-based W3C standard,\n" @@ -7809,11 +8414,11 @@ msgstr "" msgid "Clone of the Motif toolkit for the X window system." msgstr "" -#: gnu/packages/libreoffice.scm:96 +#: gnu/packages/libreoffice.scm:100 msgid "General purpose formula parser and interpreter" msgstr "" -#: gnu/packages/libreoffice.scm:97 +#: gnu/packages/libreoffice.scm:101 msgid "" "Ixion is a library for calculating the results of formula\n" "expressions stored in multiple named targets, or \"cells\". The cells can\n" @@ -7821,11 +8426,11 @@ msgid "" "their dependencies automatically upon calculation." msgstr "" -#: gnu/packages/libreoffice.scm:123 +#: gnu/packages/libreoffice.scm:128 msgid "File import filter library for spreadsheet documents" msgstr "" -#: gnu/packages/libreoffice.scm:124 +#: gnu/packages/libreoffice.scm:129 msgid "" "Orcus is a library that provides a collection of standalone\n" "file processing filters. It is currently focused on providing filters for\n" @@ -7835,33 +8440,33 @@ msgid "" "CSV, CSS and XML." msgstr "" -#: gnu/packages/libreoffice.scm:158 +#: gnu/packages/libreoffice.scm:163 msgid "Document importer for office suites" msgstr "" -#: gnu/packages/libreoffice.scm:159 +#: gnu/packages/libreoffice.scm:164 msgid "" "Librevenge is a base library for writing document import\n" "filters. It has interfaces for text documents, vector graphics,\n" "spreadsheets and presentations." msgstr "" -#: gnu/packages/libreoffice.scm:184 +#: gnu/packages/libreoffice.scm:189 msgid "Library for importing WordPerfect documents" msgstr "Bibliotek til import af WordPerfect-dokumenter" -#: gnu/packages/libreoffice.scm:185 +#: gnu/packages/libreoffice.scm:190 msgid "" "Libwpd is a C++ library designed to help process\n" "WordPerfect documents. It is most commonly used to import such documents\n" "into other word processors." msgstr "" -#: gnu/packages/libreoffice.scm:218 +#: gnu/packages/libreoffice.scm:223 msgid "Library for import of reflowable e-book formats" msgstr "" -#: gnu/packages/libreoffice.scm:219 +#: gnu/packages/libreoffice.scm:224 msgid "" "Libe-book is a library and a set of tools for reading and\n" "converting various reflowable e-book formats. Currently supported are:\n" @@ -7871,42 +8476,55 @@ msgid "" "ZVR (simple compressed text format)." msgstr "" -#: gnu/packages/libreoffice.scm:248 -msgid "Library and tools for the WordPerfect Graphics format" +#: gnu/packages/libreoffice.scm:254 +msgid "EPUB generator library for librevenge" +msgstr "EPUB-oprettelsesbibliotek for librevenge" + +#: gnu/packages/libreoffice.scm:255 +msgid "" +"libepubgen is an EPUB generator for librevenge. It supports\n" +"librevenge's text document interface and--currently in a very limited\n" +"way--presentation and vector drawing interfaces." msgstr "" -#: gnu/packages/libreoffice.scm:249 +#: gnu/packages/libreoffice.scm:281 +msgid "Library and tools for the WordPerfect Graphics format" +msgstr "Bibliotek og værktøjer ofr WordPerfect Graphics-formatet" + +#: gnu/packages/libreoffice.scm:282 msgid "" "The libwpg project provides a library and tools for\n" "working with graphics in the WPG (WordPerfect Graphics) format." msgstr "" -#: gnu/packages/libreoffice.scm:290 +#: gnu/packages/libreoffice.scm:323 msgid "CMIS client library" -msgstr "" +msgstr "CMIS-klientbibliotek" -#: gnu/packages/libreoffice.scm:291 +#: gnu/packages/libreoffice.scm:324 msgid "" "LibCMIS is a C++ client library for the CMIS interface. It\n" "allows C++ applications to connect to any ECM behaving as a CMIS server such\n" "as Alfresco or Nuxeo." msgstr "" -#: gnu/packages/libreoffice.scm:322 +#: gnu/packages/libreoffice.scm:355 msgid "Library for parsing the AbiWord format" -msgstr "" +msgstr "Bibliotek til at fortolke AbiWord-formatet" -#: gnu/packages/libreoffice.scm:323 +#: gnu/packages/libreoffice.scm:356 msgid "" "Libabw is a library that parses the file format of\n" "AbiWord documents." msgstr "" +"Libabw er et bibliotek, der fortolker filformatet for\n" +"AbiWord-dokumenter." -#: gnu/packages/libreoffice.scm:354 +#: gnu/packages/libreoffice.scm:387 msgid "Library for parsing the CorelDRAW format" msgstr "Bibliotek til fortolkning af CorelDRAW-formatet" -#: gnu/packages/libreoffice.scm:355 +#: gnu/packages/libreoffice.scm:388 msgid "" "Libcdr is a library that parses the file format of\n" "CorelDRAW documents of all versions." @@ -7914,21 +8532,21 @@ msgstr "" "Libcdr er et bibliotek, som fortolker filformatet\n" "for CorelDraw-dokumenter for alle versioner." -#: gnu/packages/libreoffice.scm:387 +#: gnu/packages/libreoffice.scm:420 msgid "Library for parsing the Apple Keynote format" msgstr "Bibliotek for fortolkning af Apple Keynote-formatet" -#: gnu/packages/libreoffice.scm:388 +#: gnu/packages/libreoffice.scm:421 msgid "" "Libetonyek is a library that parses the file format of\n" "Apple Keynote documents. It currently supports Keynote versions 2 to 5." msgstr "" -#: gnu/packages/libreoffice.scm:412 +#: gnu/packages/libreoffice.scm:445 msgid "Library to access tags for identifying languages" msgstr "Bibliotek til at tilgå mærker for identifikation af sprog" -#: gnu/packages/libreoffice.scm:413 +#: gnu/packages/libreoffice.scm:446 msgid "" "Liblangtag implements an interface to work with tags\n" "for identifying languages as described in RFC 5646. It supports the\n" @@ -7937,62 +8555,73 @@ msgid "" "standard 21.0.2." msgstr "" -#: gnu/packages/libreoffice.scm:433 +#: gnu/packages/libreoffice.scm:466 msgid "Text Categorization library" msgstr "Tekstkategoriseringsbibliotek" -#: gnu/packages/libreoffice.scm:434 +#: gnu/packages/libreoffice.scm:467 msgid "" "Libexttextcat is an N-Gram-Based Text Categorization\n" "library primarily intended for language guessing." msgstr "" -#: gnu/packages/libreoffice.scm:464 +#: gnu/packages/libreoffice.scm:497 msgid "Library for parsing the FreeHand format" msgstr "Bibliotek til at fortolke FreeHand-formatet" -#: gnu/packages/libreoffice.scm:465 +#: gnu/packages/libreoffice.scm:498 msgid "" "Libfreehand is a library that parses the file format of\n" "Aldus/Macromedia/Adobe FreeHand documents." msgstr "" -#: gnu/packages/libreoffice.scm:491 +#: gnu/packages/libreoffice.scm:524 msgid "Library for parsing the Microsoft Publisher format" msgstr "" -#: gnu/packages/libreoffice.scm:492 +#: gnu/packages/libreoffice.scm:525 msgid "" "Libmspub is a library that parses the file format of\n" "Microsoft Publisher documents of all versions." msgstr "" -#: gnu/packages/libreoffice.scm:517 +#: gnu/packages/libreoffice.scm:551 +msgid "Language-neutral @code{NUMBERTEXT} and @code{MONEYTEXT} functions" +msgstr "" + +#: gnu/packages/libreoffice.scm:553 +msgid "" +"The libnumbertext library provides language-neutral @code{NUMBERTEXT}\n" +"and @code{MONEYTEXT} functions for LibreOffice Calc, available for C++ and\n" +"Java." +msgstr "" + +#: gnu/packages/libreoffice.scm:579 msgid "Library for parsing the PageMaker format" msgstr "Bibliotek til fortolkning af PageMaker-formatet" -#: gnu/packages/libreoffice.scm:518 +#: gnu/packages/libreoffice.scm:580 msgid "" "Libpagemaker is a library that parses the file format of\n" "Aldus/Adobe PageMaker documents. Currently it only understands documents\n" "created by PageMaker version 6.x and 7." msgstr "" -#: gnu/packages/libreoffice.scm:548 +#: gnu/packages/libreoffice.scm:610 msgid "Library for parsing the Microsoft Visio format" msgstr "" -#: gnu/packages/libreoffice.scm:549 +#: gnu/packages/libreoffice.scm:611 msgid "" "Libvisio is a library that parses the file format of\n" "Microsoft Visio documents of all versions." msgstr "" -#: gnu/packages/libreoffice.scm:577 +#: gnu/packages/libreoffice.scm:639 msgid "ODF (Open Document Format) library" msgstr "ODF-bibliotek (Open Document Format)" -#: gnu/packages/libreoffice.scm:578 +#: gnu/packages/libreoffice.scm:640 msgid "" "Libodfgen is a library for generating documents in the\n" "Open Document Format (ODF). It provides generator implementations for all\n" @@ -8000,42 +8629,42 @@ msgid "" "text documents, vector drawings, presentations and spreadsheets." msgstr "" -#: gnu/packages/libreoffice.scm:605 +#: gnu/packages/libreoffice.scm:667 msgid "Import library for some old Macintosh text documents" msgstr "" -#: gnu/packages/libreoffice.scm:606 +#: gnu/packages/libreoffice.scm:668 msgid "" "Libmwaw contains some import filters for old Macintosh\n" "text documents (MacWrite, ClarisWorks, ... ) and for some graphics and\n" "spreadsheet documents." msgstr "" -#: gnu/packages/libreoffice.scm:629 +#: gnu/packages/libreoffice.scm:691 msgid "Provides LibreOffice support for old StarOffice documents" msgstr "" -#: gnu/packages/libreoffice.scm:630 +#: gnu/packages/libreoffice.scm:692 msgid "" "@code{libstaroffice} is an import filter for the document formats\n" "from the old StarOffice (.sdc, .sdw, ...)." msgstr "" -#: gnu/packages/libreoffice.scm:655 +#: gnu/packages/libreoffice.scm:717 msgid "Import library for Microsoft Works text documents" msgstr "Importbibliotek for Microsoft Works-tekstdokumenter" -#: gnu/packages/libreoffice.scm:656 +#: gnu/packages/libreoffice.scm:718 msgid "" "Libwps is a library for importing files in the Microsoft\n" "Works word processor file format." msgstr "" -#: gnu/packages/libreoffice.scm:683 +#: gnu/packages/libreoffice.scm:748 msgid "Parses file format of Zoner Callisto/Draw documents" msgstr "Fortolker filformat for Zoner Callisto/Draw-dokumenter" -#: gnu/packages/libreoffice.scm:684 +#: gnu/packages/libreoffice.scm:749 msgid "" "Libzmf is a library that parses the file format of Zoner\n" "Callisto/Draw documents. Currently it only understands documents created by\n" @@ -8045,7 +8674,7 @@ msgstr "" "Callisto/Draw-dokumenter. I øjeblikket understøttes kun dokumenter oprettet\n" "af Zoner Draw version 4 og 5." -#: gnu/packages/libreoffice.scm:719 +#: gnu/packages/libreoffice.scm:778 msgid "" "Hunspell is a spell checker and morphological analyzer\n" "library and program designed for languages with rich morphology and complex\n" @@ -8053,49 +8682,59 @@ msgid "" msgstr "" #. TRANSLATORS: In French, this is "Français classique". -#: gnu/packages/libreoffice.scm:782 +#: gnu/packages/libreoffice.scm:841 msgid "Hunspell dictionary for ``classic'' French (recommended)" msgstr "" #. TRANSLATORS: In French, this is "Français moderne". -#: gnu/packages/libreoffice.scm:787 +#: gnu/packages/libreoffice.scm:846 msgid "Hunspell dictionary for ``modern'' French" msgstr "" -#: gnu/packages/libreoffice.scm:791 +#: gnu/packages/libreoffice.scm:850 msgid "Hunspell dictionary for the post @dfn{1990 réforme} French" msgstr "" -#: gnu/packages/libreoffice.scm:795 +#: gnu/packages/libreoffice.scm:854 msgid "Hunspell dictionary for all variants of French" msgstr "" -#: gnu/packages/libreoffice.scm:813 +#: gnu/packages/libreoffice.scm:872 msgid "Hyphenation library" msgstr "Orddelingsbibliotek" -#: gnu/packages/libreoffice.scm:814 +#: gnu/packages/libreoffice.scm:873 msgid "" "Hyphen is a hyphenation library using TeX hyphenation\n" "patterns, which are pre-processed by a perl script." msgstr "" -#: gnu/packages/libreoffice.scm:837 +#: gnu/packages/libreoffice.scm:896 msgid "Thesaurus" msgstr "" -#: gnu/packages/libreoffice.scm:838 +#: gnu/packages/libreoffice.scm:897 msgid "" "MyThes is a simple thesaurus that uses a structured text\n" "data file and an index file with binary search to look up words and phrases\n" "and to return information on pronunciations, meanings and synonyms." msgstr "" -#: gnu/packages/libreoffice.scm:1043 -msgid "Office suite" +#: gnu/packages/libreoffice.scm:925 +msgid "Library and tools for the QuarkXPress file format" +msgstr "Bibliotek og værktøjer for QuarkXPress-filformatet" + +#: gnu/packages/libreoffice.scm:926 +msgid "" +"libqxp is a library and a set of tools for reading and\n" +"converting QuarkXPress file format. It supports versions 3.1 to 4.1." msgstr "" -#: gnu/packages/libreoffice.scm:1044 +#: gnu/packages/libreoffice.scm:1126 +msgid "Office suite" +msgstr "Kontorpakke" + +#: gnu/packages/libreoffice.scm:1127 msgid "" "LibreOffice is a comprehensive office suite. It contains\n" "a number of components: Writer, a word processor; Calc, a spreadsheet\n" @@ -8103,30 +8742,34 @@ msgid "" "flowcharting application; Base, a database and database frontend;\n" "Math for editing mathematics." msgstr "" +"LibreOffice er en omfattende kontorpakke. Den indeholder et antal\n" +"komponenter: Writer, tekstbehandling; Calc, regneark; Impress,\n" +"præsentationsprogram; Draw, tegne- og diagramprogram; Base, en\n" +"databasebrugerflade; Math til at redigere matematik." -#: gnu/packages/linux.scm:214 +#: gnu/packages/linux.scm:220 msgid "GNU Linux-Libre kernel headers" -msgstr "GNU Linux-LIbre - kerneteksthoveder" +msgstr "GNU Linux-Libre - kerneteksthoveder" -#: gnu/packages/linux.scm:215 +#: gnu/packages/linux.scm:221 msgid "Headers of the Linux-Libre kernel." msgstr "Teksthoveder for Linux-Libre-kernen." -#: gnu/packages/linux.scm:382 +#: gnu/packages/linux.scm:396 msgid "100% free redistribution of a cleaned Linux kernel" msgstr "" -#: gnu/packages/linux.scm:384 +#: gnu/packages/linux.scm:398 msgid "" "GNU Linux-Libre is a free (as in freedom) variant of the Linux kernel.\n" "It has been modified to remove all non-free binary blobs." msgstr "" -#: gnu/packages/linux.scm:505 +#: gnu/packages/linux.scm:529 msgid "Pluggable authentication modules for Linux" msgstr "" -#: gnu/packages/linux.scm:507 +#: gnu/packages/linux.scm:531 msgid "" "A *Free* project to implement OSF's RFC 86.0.\n" "Pluggable authentication modules are small shared object files that can\n" @@ -8134,44 +8777,44 @@ msgid "" "at login. Local and dynamic reconfiguration are its key features." msgstr "" -#: gnu/packages/linux.scm:549 +#: gnu/packages/linux.scm:573 msgid "Small utilities that use the proc file system" msgstr "Små redskaber som bruger filsystemet proc" -#: gnu/packages/linux.scm:551 +#: gnu/packages/linux.scm:575 msgid "" "This PSmisc package is a set of some small useful utilities that\n" "use the proc file system. We're not about changing the world, but\n" "providing the system administrator with some help in common tasks." msgstr "" -#: gnu/packages/linux.scm:635 +#: gnu/packages/linux.scm:660 msgid "Collection of utilities for the Linux kernel" msgstr "Samling af redskaber for Linuxkernen" -#: gnu/packages/linux.scm:636 +#: gnu/packages/linux.scm:661 msgid "" "Util-linux is a diverse collection of Linux kernel\n" "utilities. It provides dmesg and includes tools for working with file systems,\n" "block devices, UUIDs, TTYs, and many other tools." msgstr "" -#: gnu/packages/linux.scm:686 +#: gnu/packages/linux.scm:685 msgid "PERPETUAL DATE CONVERTER FROM GREGORIAN TO POEE CALENDAR" msgstr "" -#: gnu/packages/linux.scm:688 +#: gnu/packages/linux.scm:687 msgid "" "ddate displays the Discordian date and holidays of a given date.\n" "The Discordian calendar was made popular by the \"Illuminatus!\" trilogy\n" "by Robert Shea and Robert Anton Wilson." msgstr "" -#: gnu/packages/linux.scm:733 +#: gnu/packages/linux.scm:723 msgid "Utilities that give information about processes" msgstr "Redskaber som giver information om processer" -#: gnu/packages/linux.scm:735 +#: gnu/packages/linux.scm:725 msgid "" "Procps is the package that has a bunch of small useful utilities\n" "that give information about processes using the Linux /proc file system.\n" @@ -8179,47 +8822,47 @@ msgid "" "slabtop, and skill." msgstr "" -#: gnu/packages/linux.scm:761 +#: gnu/packages/linux.scm:751 msgid "Tools for working with USB devices, such as lsusb" msgstr "Værktøjer for arbejde med USB-enheder, såsom lsusb" -#: gnu/packages/linux.scm:763 +#: gnu/packages/linux.scm:753 msgid "Tools for working with USB devices, such as lsusb." msgstr "Værktøjer for arbejde med USB-enheder, såsom lsusb." -#: gnu/packages/linux.scm:839 +#: gnu/packages/linux.scm:829 msgid "Creating and checking ext2/ext3/ext4 file systems" msgstr "Oprettelse og kontrol af ext2/ext3/ext4-filsystemer" -#: gnu/packages/linux.scm:841 +#: gnu/packages/linux.scm:831 msgid "This package provides tools for manipulating ext2/ext3/ext4 file systems." msgstr "Denne pakke tilbyder værktøjer til manipulering af ext2/ext3/ext4-filsystemer." -#: gnu/packages/linux.scm:882 +#: gnu/packages/linux.scm:873 msgid "Statically-linked e2fsck command from e2fsprogs" msgstr "" -#: gnu/packages/linux.scm:883 +#: gnu/packages/linux.scm:874 msgid "" "This package provides statically-linked e2fsck command taken\n" "from the e2fsprogs package. It is meant to be used in initrds." msgstr "" -#: gnu/packages/linux.scm:902 +#: gnu/packages/linux.scm:895 msgid "Recover deleted files from ext2/3/4 partitions" msgstr "Gendan slettede filer fra ext2/3/4-partitioner" -#: gnu/packages/linux.scm:904 +#: gnu/packages/linux.scm:897 msgid "" "Extundelete is a set of tools that can recover deleted files from an\n" "ext3 or ext4 partition." msgstr "" -#: gnu/packages/linux.scm:935 +#: gnu/packages/linux.scm:928 msgid "Zero non-allocated regions in ext2/ext3/ext4 file systems" msgstr "" -#: gnu/packages/linux.scm:937 +#: gnu/packages/linux.scm:930 msgid "" "Zerofree finds the unallocated blocks with non-zero value content in an\n" "ext2, ext3, or ext4 file system and fills them with zeroes (or another value).\n" @@ -8227,46 +8870,46 @@ msgid "" "Zerofree requires the file system to be unmounted or mounted read-only." msgstr "" -#: gnu/packages/linux.scm:965 +#: gnu/packages/linux.scm:962 msgid "System call tracer for Linux" msgstr "" -#: gnu/packages/linux.scm:967 +#: gnu/packages/linux.scm:964 msgid "" "strace is a system call tracer, i.e. a debugging tool which prints out a\n" "trace of all the system calls made by a another process/program." msgstr "" -#: gnu/packages/linux.scm:988 +#: gnu/packages/linux.scm:985 msgid "Library call tracer for Linux" msgstr "" -#: gnu/packages/linux.scm:990 +#: gnu/packages/linux.scm:987 msgid "" "ltrace intercepts and records dynamic library calls which are called by\n" "an executed process and the signals received by that process. It can also\n" "intercept and print the system calls executed by the program." msgstr "" -#: gnu/packages/linux.scm:1009 +#: gnu/packages/linux.scm:1006 msgid "The Advanced Linux Sound Architecture libraries" msgstr "" -#: gnu/packages/linux.scm:1011 gnu/packages/linux.scm:1055 +#: gnu/packages/linux.scm:1008 gnu/packages/linux.scm:1052 msgid "" "The Advanced Linux Sound Architecture (ALSA) provides audio and\n" "MIDI functionality to the Linux-based operating system." msgstr "" -#: gnu/packages/linux.scm:1053 +#: gnu/packages/linux.scm:1050 msgid "Utilities for the Advanced Linux Sound Architecture (ALSA)" msgstr "" -#: gnu/packages/linux.scm:1113 +#: gnu/packages/linux.scm:1119 msgid "Plugins for the Advanced Linux Sound Architecture (ALSA)" msgstr "" -#: gnu/packages/linux.scm:1115 +#: gnu/packages/linux.scm:1121 msgid "" "The Advanced Linux Sound Architecture (ALSA) provides audio and\n" "MIDI functionality to the Linux-based operating system. This package enhances ALSA\n" @@ -8275,11 +8918,11 @@ msgid "" "external rate conversion." msgstr "" -#: gnu/packages/linux.scm:1149 +#: gnu/packages/linux.scm:1155 msgid "Programs to configure Linux IP packet filtering rules" msgstr "" -#: gnu/packages/linux.scm:1151 +#: gnu/packages/linux.scm:1157 msgid "" "@command{iptables} is the user-space command line program used to\n" "configure the Linux 2.4.x and later IPv4 packet filtering ruleset\n" @@ -8291,11 +8934,11 @@ msgid "" "Both commands are targeted at system administrators." msgstr "" -#: gnu/packages/linux.scm:1207 +#: gnu/packages/linux.scm:1213 msgid "Ethernet bridge frame table administration" msgstr "" -#: gnu/packages/linux.scm:1210 +#: gnu/packages/linux.scm:1216 msgid "" "ebtables is an application program used to set up and maintain the\n" "tables of rules (inside the Linux kernel) that inspect Ethernet frames. It is\n" @@ -8303,11 +8946,11 @@ msgid "" "that the Ethernet protocol is much simpler than the IP protocol." msgstr "" -#: gnu/packages/linux.scm:1258 +#: gnu/packages/linux.scm:1264 msgid "Utilities for controlling TCP/IP networking and traffic in Linux" msgstr "Redskaber for kontrol af TCP/IP-netværk og trafik i Linux" -#: gnu/packages/linux.scm:1260 +#: gnu/packages/linux.scm:1266 msgid "" "Iproute2 is a collection of utilities for controlling TCP/IP networking\n" "and traffic with the Linux kernel. The most important of these are\n" @@ -8319,11 +8962,11 @@ msgid "" "inadequately in modern network environments, and both should be deprecated." msgstr "" -#: gnu/packages/linux.scm:1336 +#: gnu/packages/linux.scm:1343 msgid "Tools for controlling the network subsystem in Linux" msgstr "" -#: gnu/packages/linux.scm:1338 +#: gnu/packages/linux.scm:1345 msgid "" "This package includes the important tools for controlling the network\n" "subsystem of the Linux kernel. This includes arp, ifconfig, netstat, rarp and\n" @@ -8332,21 +8975,21 @@ msgid "" "configuration (iptunnel, ipmaddr)." msgstr "" -#: gnu/packages/linux.scm:1375 +#: gnu/packages/linux.scm:1383 msgid "Library for working with POSIX capabilities" msgstr "Bibliotek til arbejde med POSIX-funktioner" -#: gnu/packages/linux.scm:1377 +#: gnu/packages/linux.scm:1385 msgid "" "Libcap2 provides a programming interface to POSIX capabilities on\n" "Linux-based operating systems." msgstr "" -#: gnu/packages/linux.scm:1420 +#: gnu/packages/linux.scm:1428 msgid "Manipulate Ethernet bridges" msgstr "" -#: gnu/packages/linux.scm:1422 +#: gnu/packages/linux.scm:1430 msgid "" "Utilities for Linux's Ethernet bridging facilities. A bridge is a way\n" "to connect two Ethernet segments together in a protocol independent way.\n" @@ -8355,11 +8998,11 @@ msgid "" "transparently through a bridge." msgstr "" -#: gnu/packages/linux.scm:1490 +#: gnu/packages/linux.scm:1498 msgid "NetLink protocol library suite" msgstr "" -#: gnu/packages/linux.scm:1492 +#: gnu/packages/linux.scm:1500 msgid "" "The libnl suite is a collection of libraries providing APIs to netlink\n" "protocol based Linux kernel interfaces. Netlink is an IPC mechanism primarily\n" @@ -8368,21 +9011,21 @@ msgid "" "configuration and monitoring interfaces." msgstr "" -#: gnu/packages/linux.scm:1522 +#: gnu/packages/linux.scm:1530 msgid "Tool for configuring wireless devices" msgstr "Værktøj til konfiguration af trådløse enheder" -#: gnu/packages/linux.scm:1524 +#: gnu/packages/linux.scm:1532 msgid "" "iw is a new nl80211 based CLI configuration utility for wireless\n" "devices. It replaces @code{iwconfig}, which is deprecated." msgstr "" -#: gnu/packages/linux.scm:1570 +#: gnu/packages/linux.scm:1578 msgid "Analyze power consumption on Intel-based laptops" msgstr "Analyser strømforbrug på Intelbaserede bærbare" -#: gnu/packages/linux.scm:1572 +#: gnu/packages/linux.scm:1580 msgid "" "PowerTOP is a Linux tool to diagnose issues with power consumption and\n" "power management. In addition to being a diagnostic tool, PowerTOP also has\n" @@ -8391,31 +9034,31 @@ msgid "" "settings." msgstr "" -#: gnu/packages/linux.scm:1594 +#: gnu/packages/linux.scm:1602 msgid "Audio mixer for X and the console" msgstr "" -#: gnu/packages/linux.scm:1596 +#: gnu/packages/linux.scm:1604 msgid "" "Aumix adjusts an audio mixer from X, the console, a terminal,\n" "the command line or a script." msgstr "" -#: gnu/packages/linux.scm:1620 +#: gnu/packages/linux.scm:1628 msgid "Displays the IO activity of running processes" msgstr "Viser IO-aktivet for kørende processer" -#: gnu/packages/linux.scm:1622 +#: gnu/packages/linux.scm:1630 msgid "" "Iotop is a Python program with a top like user interface to show the\n" "processes currently causing I/O." msgstr "" -#: gnu/packages/linux.scm:1676 +#: gnu/packages/linux.scm:1684 msgid "Support file systems implemented in user space" msgstr "" -#: gnu/packages/linux.scm:1678 +#: gnu/packages/linux.scm:1686 msgid "" "As a consequence of its monolithic design, file system code for Linux\n" "normally goes into the kernel itself---which is not only a robustness issue,\n" @@ -8425,11 +9068,11 @@ msgid "" "user-space processes." msgstr "" -#: gnu/packages/linux.scm:1709 +#: gnu/packages/linux.scm:1717 msgid "User-space union file system" msgstr "" -#: gnu/packages/linux.scm:1711 +#: gnu/packages/linux.scm:1719 msgid "" "UnionFS-FUSE is a flexible union file system implementation in user\n" "space, using the FUSE library. Mounting a union file system allows you to\n" @@ -8437,15 +9080,15 @@ msgid "" "UnionFS-FUSE additionally supports copy-on-write." msgstr "" -#: gnu/packages/linux.scm:1736 +#: gnu/packages/linux.scm:1747 msgid "User-space union file system (statically linked)" msgstr "" -#: gnu/packages/linux.scm:1784 +#: gnu/packages/linux.scm:1797 msgid "Mount remote file systems over SSH" msgstr "" -#: gnu/packages/linux.scm:1786 +#: gnu/packages/linux.scm:1799 msgid "" "This is a file system client based on the SSH File Transfer Protocol.\n" "Since most SSH servers already support this protocol it is very easy to set\n" @@ -8453,11 +9096,11 @@ msgid "" "file system is as easy as logging into the server with an SSH client." msgstr "" -#: gnu/packages/linux.scm:1809 +#: gnu/packages/linux.scm:1822 msgid "Tool for mounting archive files with FUSE" msgstr "" -#: gnu/packages/linux.scm:1810 +#: gnu/packages/linux.scm:1823 msgid "" "archivemount is a FUSE-based file system for Unix variants,\n" "including Linux. Its purpose is to mount archives (i.e. tar, tar.gz, etc.) to a\n" @@ -8466,11 +9109,11 @@ msgid "" "compressed, transparent to other programs, without decompressing them." msgstr "" -#: gnu/packages/linux.scm:1840 +#: gnu/packages/linux.scm:1852 msgid "Tools for non-uniform memory access (NUMA) machines" msgstr "" -#: gnu/packages/linux.scm:1842 +#: gnu/packages/linux.scm:1854 msgid "" "NUMA stands for Non-Uniform Memory Access, in other words a system whose\n" "memory is not all in one place. The numactl program allows you to run your\n" @@ -8483,42 +9126,42 @@ msgid "" "system." msgstr "" -#: gnu/packages/linux.scm:1878 +#: gnu/packages/linux.scm:1890 msgid "Neo2 console layout" msgstr "" -#: gnu/packages/linux.scm:1880 +#: gnu/packages/linux.scm:1892 msgid "" "Kbd-neo provides the Neo2 keyboard layout for use with\n" "@command{loadkeys(1)} from @code{kbd(4)}." msgstr "" -#: gnu/packages/linux.scm:1943 +#: gnu/packages/linux.scm:1958 msgid "Linux keyboard utilities and keyboard maps" msgstr "" -#: gnu/packages/linux.scm:1945 +#: gnu/packages/linux.scm:1960 msgid "" "This package contains keytable files and keyboard utilities compatible\n" "for systems using the Linux kernel. This includes commands such as\n" "'loadkeys', 'setfont', 'kbdinfo', and 'chvt'." msgstr "" -#: gnu/packages/linux.scm:1964 +#: gnu/packages/linux.scm:1984 msgid "Monitor file accesses" msgstr "" -#: gnu/packages/linux.scm:1966 +#: gnu/packages/linux.scm:1986 msgid "" "The inotify-tools packages provides a C library and command-line tools\n" "to use Linux' inotify mechanism, which allows file accesses to be monitored." msgstr "" -#: gnu/packages/linux.scm:2004 +#: gnu/packages/linux.scm:2025 msgid "Kernel module tools" msgstr "" -#: gnu/packages/linux.scm:2005 +#: gnu/packages/linux.scm:2026 msgid "" "Kmod is a set of tools to handle common tasks with Linux\n" "kernel modules like insert, remove, list, check properties, resolve\n" @@ -8529,37 +9172,37 @@ msgid "" "from the module-init-tools project." msgstr "" -#: gnu/packages/linux.scm:2069 +#: gnu/packages/linux.scm:2089 msgid "Userspace device management" msgstr "" -#: gnu/packages/linux.scm:2070 +#: gnu/packages/linux.scm:2090 msgid "" "Udev is a daemon which dynamically creates and removes\n" "device nodes from /dev/, handles hotplug events and loads drivers at boot\n" "time." msgstr "" -#: gnu/packages/linux.scm:2136 +#: gnu/packages/linux.scm:2169 msgid "Logical volume management for Linux" msgstr "" -#: gnu/packages/linux.scm:2138 +#: gnu/packages/linux.scm:2171 msgid "" "LVM2 is the logical volume management tool set for Linux-based systems.\n" "This package includes the user-space libraries and tools, including the device\n" "mapper. Kernel components are part of Linux-libre." msgstr "" -#: gnu/packages/linux.scm:2160 +#: gnu/packages/linux.scm:2193 msgid "Logical volume management for Linux (statically linked)" msgstr "" -#: gnu/packages/linux.scm:2190 +#: gnu/packages/linux.scm:2223 msgid "Tools for manipulating Linux Wireless Extensions" msgstr "" -#: gnu/packages/linux.scm:2191 +#: gnu/packages/linux.scm:2224 msgid "" "Wireless Tools are used to manipulate the now-deprecated\n" "Linux Wireless Extensions; consider using 'iw' instead. The Wireless\n" @@ -8568,55 +9211,55 @@ msgid "" "interface." msgstr "" -#: gnu/packages/linux.scm:2263 +#: gnu/packages/linux.scm:2301 msgid "Central regulatory domain agent (CRDA) for WiFi" msgstr "" -#: gnu/packages/linux.scm:2265 +#: gnu/packages/linux.scm:2303 msgid "" "The Central Regulatory Domain Agent (CRDA) acts as the udev helper for\n" "communication between the kernel Linux and user space for regulatory\n" "compliance." msgstr "" -#: gnu/packages/linux.scm:2311 +#: gnu/packages/linux.scm:2356 msgid "Wireless regulatory database" msgstr "" -#: gnu/packages/linux.scm:2313 +#: gnu/packages/linux.scm:2358 msgid "" "This package contains the wireless regulatory database Central\n" "Regulatory Database Agent (CRDA) daemon. The database contains information on\n" "country-specific regulations for the wireless spectrum." msgstr "" -#: gnu/packages/linux.scm:2390 +#: gnu/packages/linux.scm:2435 msgid "Utilities to read temperature/voltage/fan sensors" msgstr "" -#: gnu/packages/linux.scm:2392 +#: gnu/packages/linux.scm:2437 msgid "" "Lm-sensors is a hardware health monitoring package for Linux. It allows\n" "you to access information from temperature, voltage, and fan speed sensors.\n" "It works with most newer systems." msgstr "" -#: gnu/packages/linux.scm:2410 +#: gnu/packages/linux.scm:2455 msgid "Manipulate Intel microcode bundles" msgstr "" -#: gnu/packages/linux.scm:2412 +#: gnu/packages/linux.scm:2457 msgid "" "@command{iucode_tool} is a utility to work with microcode packages for\n" "Intel processors. It can convert between formats, extract specific versions,\n" "create a firmware image suitable for the Linux kernel, and more." msgstr "" -#: gnu/packages/linux.scm:2441 +#: gnu/packages/linux.scm:2486 msgid "I2C tools for Linux" msgstr "I2C-værktøjer for Linux" -#: gnu/packages/linux.scm:2443 +#: gnu/packages/linux.scm:2488 msgid "" "The i2c-tools package contains a heterogeneous set of I2C tools for\n" "Linux: a bus probing tool, a chip dumper, register-level SMBus access helpers,\n" @@ -8624,22 +9267,22 @@ msgid "" "SMBus access." msgstr "" -#: gnu/packages/linux.scm:2480 +#: gnu/packages/linux.scm:2525 msgid "Hardware health information viewer" msgstr "" -#: gnu/packages/linux.scm:2482 +#: gnu/packages/linux.scm:2527 msgid "" "Xsensors reads data from the libsensors library regarding hardware\n" "health such as temperature, voltage and fan speed and displays the information\n" "in a digital read-out." msgstr "" -#: gnu/packages/linux.scm:2532 +#: gnu/packages/linux.scm:2579 msgid "Linux profiling with performance counters" msgstr "" -#: gnu/packages/linux.scm:2534 +#: gnu/packages/linux.scm:2581 msgid "" "perf is a tool suite for profiling using hardware performance counters,\n" "with support in the Linux kernel. perf can instrument CPU performance\n" @@ -8648,11 +9291,11 @@ msgid "" "particular the 'perf' command." msgstr "" -#: gnu/packages/linux.scm:2557 +#: gnu/packages/linux.scm:2604 msgid "Simple tool for creating Linux namespace containers" msgstr "Simpelt værktøj til oprettelse af naverumscontainere under Linux" -#: gnu/packages/linux.scm:2558 +#: gnu/packages/linux.scm:2605 msgid "" "pflask is a simple tool for creating Linux namespace\n" "containers. It can be used for running a command or even booting an OS inside\n" @@ -8661,11 +9304,23 @@ msgid "" "thanks to the use of namespaces." msgstr "" -#: gnu/packages/linux.scm:2587 +#: gnu/packages/linux.scm:2651 +msgid "Container platform" +msgstr "Containerplatform" + +#: gnu/packages/linux.scm:2652 +msgid "" +"Singularity is a container platform supporting a number of\n" +"container image formats. It can build SquashFS container images or import\n" +"existing Docker images. Singularity requires kernel support for container\n" +"isolation or root privileges." +msgstr "" + +#: gnu/packages/linux.scm:2680 msgid "View and tune ATA disk drive parameters" msgstr "" -#: gnu/packages/linux.scm:2589 +#: gnu/packages/linux.scm:2682 msgid "" "@command{hdparm} is a command-line utility to control ATA controllers and\n" "disk drives. It can increase performance and/or reliability by careful tuning\n" @@ -8679,22 +9334,22 @@ msgid "" "Translation (@dfn{SAT}) are also supported." msgstr "" -#: gnu/packages/linux.scm:2620 +#: gnu/packages/linux.scm:2713 msgid "Tool for enabling and disabling wireless devices" msgstr "Værktøj til aktivering og deaktivering af trådløse enheder" -#: gnu/packages/linux.scm:2622 +#: gnu/packages/linux.scm:2715 msgid "" "rfkill is a simple tool for accessing the rfkill device interface,\n" "which is used to enable and disable wireless networking devices, typically\n" "WLAN, Bluetooth and mobile broadband." msgstr "" -#: gnu/packages/linux.scm:2643 +#: gnu/packages/linux.scm:2736 msgid "Display information on ACPI devices" msgstr "" -#: gnu/packages/linux.scm:2644 +#: gnu/packages/linux.scm:2737 msgid "" "@code{acpi} attempts to replicate the functionality of the\n" "\"old\" @code{apm} command on ACPI systems, including battery and thermal\n" @@ -8702,11 +9357,11 @@ msgid "" "about ACPI devices." msgstr "" -#: gnu/packages/linux.scm:2663 +#: gnu/packages/linux.scm:2756 msgid "Daemon for delivering ACPI events to user-space programs" msgstr "" -#: gnu/packages/linux.scm:2665 +#: gnu/packages/linux.scm:2758 msgid "" "acpid is designed to notify user-space programs of Advanced\n" "Configuration and Power Interface (ACPI) events. acpid should be started\n" @@ -8715,37 +9370,37 @@ msgid "" "specified in /etc/acpi/events and execute the rules that match the event." msgstr "" -#: gnu/packages/linux.scm:2687 +#: gnu/packages/linux.scm:2780 msgid "System utilities based on Linux sysfs" msgstr "" -#: gnu/packages/linux.scm:2689 +#: gnu/packages/linux.scm:2782 msgid "" "These are a set of utilities built upon sysfs, a virtual file system in\n" "Linux kernel versions 2.5+ that exposes a system's device tree. The package\n" "also contains the libsysfs library." msgstr "" -#: gnu/packages/linux.scm:2718 +#: gnu/packages/linux.scm:2812 msgid "System utilities based on Linux sysfs (version 1.x)" msgstr "" -#: gnu/packages/linux.scm:2741 +#: gnu/packages/linux.scm:2835 msgid "Utilities to get and set CPU frequency on Linux" msgstr "" -#: gnu/packages/linux.scm:2743 +#: gnu/packages/linux.scm:2837 msgid "" "The cpufrequtils suite contains utilities to retrieve CPU frequency\n" "information, and set the CPU frequency if supported, using the cpufreq\n" "capabilities of the Linux kernel." msgstr "" -#: gnu/packages/linux.scm:2762 +#: gnu/packages/linux.scm:2856 msgid "Interface library for the Linux IEEE1394 drivers" msgstr "" -#: gnu/packages/linux.scm:2764 +#: gnu/packages/linux.scm:2858 msgid "" "Libraw1394 is the only supported interface to the kernel side raw1394 of\n" "the Linux IEEE-1394 subsystem, which provides direct access to the connected\n" @@ -8754,46 +9409,46 @@ msgid "" "protocol in question." msgstr "" -#: gnu/packages/linux.scm:2788 +#: gnu/packages/linux.scm:2882 msgid "AV/C protocol library for IEEE 1394" msgstr "" -#: gnu/packages/linux.scm:2790 +#: gnu/packages/linux.scm:2884 msgid "" "Libavc1394 is a programming interface to the AV/C specification from\n" "the 1394 Trade Association. AV/C stands for Audio/Video Control." msgstr "" -#: gnu/packages/linux.scm:2812 +#: gnu/packages/linux.scm:2906 msgid "Isochronous streaming media library for IEEE 1394" msgstr "" -#: gnu/packages/linux.scm:2814 +#: gnu/packages/linux.scm:2908 msgid "" "The libiec61883 library provides a higher level API for streaming DV,\n" "MPEG-2 and audio over Linux IEEE 1394." msgstr "" -#: gnu/packages/linux.scm:2863 +#: gnu/packages/linux.scm:2957 msgid "Tool for managing Linux Software RAID arrays" msgstr "" -#: gnu/packages/linux.scm:2865 +#: gnu/packages/linux.scm:2959 msgid "" "mdadm is a tool for managing Linux Software RAID arrays. It can create,\n" "assemble, report on, and monitor arrays. It can also move spares between raid\n" "arrays when needed." msgstr "" -#: gnu/packages/linux.scm:2897 +#: gnu/packages/linux.scm:2991 msgid "Statically-linked 'mdadm' command for use in an initrd" msgstr "" -#: gnu/packages/linux.scm:2962 +#: gnu/packages/linux.scm:3056 msgid "Access block devices through multiple paths" msgstr "" -#: gnu/packages/linux.scm:2964 +#: gnu/packages/linux.scm:3058 msgid "" "This package provides the following binaries to drive the\n" "Linux Device Mapper multipathing driver:\n" @@ -8806,95 +9461,95 @@ msgid "" "@end enumerate" msgstr "" -#: gnu/packages/linux.scm:2996 +#: gnu/packages/linux.scm:3090 msgid "Linux-native asynchronous I/O access library" msgstr "" -#: gnu/packages/linux.scm:2998 +#: gnu/packages/linux.scm:3092 msgid "" "This library enables userspace to use Linux kernel asynchronous I/O\n" "system calls, important for the performance of databases and other advanced\n" "applications." msgstr "" -#: gnu/packages/linux.scm:3020 +#: gnu/packages/linux.scm:3114 msgid "Bluetooth subband audio codec" msgstr "Bluetooth subband-lydkodning" -#: gnu/packages/linux.scm:3022 +#: gnu/packages/linux.scm:3116 msgid "" "The SBC is a digital audio encoder and decoder used to transfer data to\n" "Bluetooth audio output devices like headphones or loudspeakers." msgstr "" -#: gnu/packages/linux.scm:3088 +#: gnu/packages/linux.scm:3182 msgid "Linux Bluetooth protocol stack" msgstr "" -#: gnu/packages/linux.scm:3090 +#: gnu/packages/linux.scm:3184 msgid "" "BlueZ provides support for the core Bluetooth layers and protocols. It\n" "is flexible, efficient and uses a modular implementation." msgstr "" -#: gnu/packages/linux.scm:3112 +#: gnu/packages/linux.scm:3206 msgid "Mount exFAT file systems" msgstr "" -#: gnu/packages/linux.scm:3114 +#: gnu/packages/linux.scm:3208 msgid "" "This package provides a FUSE-based file system that provides read and\n" "write access to exFAT devices." msgstr "" -#: gnu/packages/linux.scm:3157 +#: gnu/packages/linux.scm:3250 msgid "Mouse support for the Linux console" msgstr "Museunderstøttelse for Linuxkonsollen" -#: gnu/packages/linux.scm:3159 +#: gnu/packages/linux.scm:3252 msgid "" "The GPM (general-purpose mouse) daemon is a mouse server for\n" "applications running on the Linux console. It allows users to select items\n" "and copy/paste text in the console and in xterm." msgstr "" -#: gnu/packages/linux.scm:3218 +#: gnu/packages/linux.scm:3315 msgid "Create and manage btrfs copy-on-write file systems" msgstr "" -#: gnu/packages/linux.scm:3219 +#: gnu/packages/linux.scm:3316 msgid "" "Btrfs is a @dfn{copy-on-write} (CoW) file system for Linux\n" "aimed at implementing advanced features while focusing on fault tolerance,\n" "repair and easy administration." msgstr "" -#: gnu/packages/linux.scm:3251 +#: gnu/packages/linux.scm:3349 msgid "Statically-linked btrfs command from btrfs-progs" msgstr "" -#: gnu/packages/linux.scm:3252 +#: gnu/packages/linux.scm:3350 msgid "" "This package provides the statically-linked @command{btrfs}\n" "from the btrfs-progs package. It is meant to be used in initrds." msgstr "" -#: gnu/packages/linux.scm:3283 +#: gnu/packages/linux.scm:3387 msgid "Userland tools for f2fs" msgstr "" -#: gnu/packages/linux.scm:3285 +#: gnu/packages/linux.scm:3389 msgid "" "F2FS, the Flash-Friendly File System, is a modern file system\n" "designed to be fast and durable on flash devices such as solid-state\n" "disks and SD cards. This package provides the userland utilities." msgstr "" -#: gnu/packages/linux.scm:3315 +#: gnu/packages/linux.scm:3437 msgid "Free-fall protection for spinning laptop hard drives" msgstr "" -#: gnu/packages/linux.scm:3317 +#: gnu/packages/linux.scm:3439 msgid "" "Prevents shock damage to the internal spinning hard drive(s) of some\n" "HP and Dell laptops. When sudden movement is detected, all input/output\n" @@ -8904,11 +9559,11 @@ msgid "" "feature, and a laptop with an accelerometer. It has no effect on SSDs." msgstr "" -#: gnu/packages/linux.scm:3371 +#: gnu/packages/linux.scm:3494 msgid "Simple fan control program" msgstr "Simpelt kontrolprogram til blæseren" -#: gnu/packages/linux.scm:3373 +#: gnu/packages/linux.scm:3496 msgid "" "Thinkfan is a simple fan control program. It reads temperatures,\n" "checks them against configured limits and switches to appropriate (also\n" @@ -8917,22 +9572,22 @@ msgid "" "from userspace." msgstr "" -#: gnu/packages/linux.scm:3408 +#: gnu/packages/linux.scm:3544 msgid "Read-write access to NTFS file systems" msgstr "Læs/skriv adgang til NTFS-filsystemer" -#: gnu/packages/linux.scm:3410 +#: gnu/packages/linux.scm:3546 msgid "" "NTFS-3G provides read-write access to NTFS file systems, which are\n" "commonly found on Microsoft Windows. It is implemented as a FUSE file system.\n" "The package provides additional NTFS tools." msgstr "" -#: gnu/packages/linux.scm:3452 +#: gnu/packages/linux.scm:3588 msgid "Utilities and libraries for working with RDMA devices" msgstr "Redskaber og bibliotek for arbejde med RDMA-enheder" -#: gnu/packages/linux.scm:3454 +#: gnu/packages/linux.scm:3590 msgid "" "This package provides userspace components for the InfiniBand\n" "subsystem of the Linux kernel. Specifically it contains userspace\n" @@ -8952,49 +9607,74 @@ msgid "" "@end enumerate" msgstr "" -#: gnu/packages/linux.scm:3507 +#: gnu/packages/linux.scm:3643 +msgid "Open Fabrics Enterprise Distribution (OFED) Performance Tests" +msgstr "" + +#: gnu/packages/linux.scm:3644 +msgid "" +"This is a collection of tests written over uverbs intended for\n" +"use as a performance micro-benchmark. The tests may be used for hardware or\n" +"software tuning as well as for functional testing.\n" +"\n" +"The collection contains a set of bandwidth and latency benchmark such as:\n" +"@enumerate\n" +"@item Send - @code{ib_send_bw} and @code{ib_send_lat}\n" +"@item RDMA Read - @code{ib_read_bw} and @code{ib_read_lat}\n" +"@item RDMA Write - @code{ib_write_bw} and @code{ib_wriet_lat}\n" +"@item RDMA Atomic - @code{ib_atomic_bw} and @code{ib_atomic_lat}\n" +"@item Native Ethernet (when working with MOFED2) - @code{raw_ethernet_bw}, @code{raw_ethernet_lat}\n" +"@end enumerate" +msgstr "" + +#: gnu/packages/linux.scm:3681 msgid "Random number generator daemon" msgstr "" -#: gnu/packages/linux.scm:3509 +#: gnu/packages/linux.scm:3683 msgid "" "Monitor a hardware random number generator, and supply entropy\n" "from that to the system kernel's @file{/dev/random} machinery." msgstr "" -#: gnu/packages/linux.scm:3547 +#: gnu/packages/linux.scm:3720 msgid "CPU frequency and voltage scaling tools for Linux" msgstr "" -#: gnu/packages/linux.scm:3549 +#: gnu/packages/linux.scm:3722 msgid "" "cpupower is a set of user-space tools that use the cpufreq feature of the\n" "Linux kernel to retrieve and control processor features related to power saving,\n" "such as frequency and voltage scaling." msgstr "" -#: gnu/packages/linux.scm:3568 +#: gnu/packages/linux.scm:3742 msgid "Entropy source for the Linux random number generator" msgstr "" -#: gnu/packages/linux.scm:3570 +#: gnu/packages/linux.scm:3744 msgid "" "haveged generates an unpredictable stream of random numbers for use by\n" "Linux's @file{/dev/random} and @file{/dev/urandom} devices. The kernel's\n" "standard mechanisms for filling the entropy pool may not be sufficient for\n" "systems with high needs or limited user interaction, such as headless servers.\n" +"\n" "@command{haveged} runs as a privileged daemon, harvesting randomness from the\n" "indirect effects of hardware events on hidden processor state using the HArdware\n" -"Volatile Entropy Gathering and Expansion (HAVEGE) algorithm. It tunes itself to\n" -"its environment and provides the same built-in test suite for the output stream\n" -"as used on certified hardware security devices." +"Volatile Entropy Gathering and Expansion (@dfn{HAVEGE}) algorithm. It tunes\n" +"itself to its environment and provides the same built-in test suite for the\n" +"output stream as used on certified hardware security devices.\n" +"\n" +"The quality of the randomness produced by this algorithm has not been proven.\n" +"It is recommended to run it together with another entropy source like rngd, and\n" +"not as a replacement for it." msgstr "" -#: gnu/packages/linux.scm:3609 +#: gnu/packages/linux.scm:3829 msgid "eCryptfs cryptographic file system utilities" msgstr "" -#: gnu/packages/linux.scm:3611 +#: gnu/packages/linux.scm:3831 msgid "" "eCryptfs is a POSIX-compliant stacked cryptographic file system for Linux.\n" "Each file's cryptographic meta-data is stored inside the file itself, along\n" @@ -9004,11 +9684,11 @@ msgid "" "2.6.19. This package contains the userland utilities to manage it." msgstr "" -#: gnu/packages/linux.scm:3642 +#: gnu/packages/linux.scm:3862 msgid "NFSv4 support library for name/ID mapping" msgstr "" -#: gnu/packages/linux.scm:3643 +#: gnu/packages/linux.scm:3863 msgid "" "Libnfsidmap is a library holding mulitiple methods of\n" "mapping names to ids and visa versa, mainly for NFSv4. It provides an\n" @@ -9016,21 +9696,21 @@ msgid "" "the default @code{nsswitch} and the experimental @code{umich_ldap}." msgstr "" -#: gnu/packages/linux.scm:3677 +#: gnu/packages/linux.scm:3897 msgid "Tools for loading and managing Linux kernel modules" msgstr "Værktøjer til at indlæse og håndtere Linuxkernemoduler" -#: gnu/packages/linux.scm:3679 +#: gnu/packages/linux.scm:3899 msgid "" "Tools for loading and managing Linux kernel modules, such as `modprobe',\n" "`insmod', `lsmod', and more." msgstr "" -#: gnu/packages/linux.scm:3713 +#: gnu/packages/linux.scm:3936 msgid "Machine check monitor for x86 Linux systems" msgstr "" -#: gnu/packages/linux.scm:3715 +#: gnu/packages/linux.scm:3938 msgid "" "The mcelog daemon is required by the Linux kernel to log memory, I/O, CPU,\n" "and other hardware errors on x86 systems. It can also perform user-defined\n" @@ -9038,11 +9718,11 @@ msgid "" "are exceeded." msgstr "" -#: gnu/packages/linux.scm:3744 +#: gnu/packages/linux.scm:3967 msgid "MTD Flash Storage Utilities" msgstr "Lagerredskaber for MTD-flash" -#: gnu/packages/linux.scm:3745 +#: gnu/packages/linux.scm:3968 msgid "" "This package provides utilities for testing, partitioning, etc\n" "of flash storage." @@ -9050,11 +9730,11 @@ msgstr "" "Denne pakke tilbyder redskaber til test, partitionering, etc.\n" "for flashlager." -#: gnu/packages/linux.scm:3768 +#: gnu/packages/linux.scm:3991 msgid "Interface to Linux's seccomp syscall filtering mechanism" msgstr "" -#: gnu/packages/linux.scm:3769 +#: gnu/packages/linux.scm:3992 msgid "" "The libseccomp library provides an easy to use, platform\n" "independent, interface to the Linux Kernel's syscall filtering mechanism. The\n" @@ -9064,11 +9744,11 @@ msgid "" "developers." msgstr "" -#: gnu/packages/linux.scm:3811 +#: gnu/packages/linux.scm:4034 msgid "Usage monitor for AMD Radeon graphics" msgstr "" -#: gnu/packages/linux.scm:3812 +#: gnu/packages/linux.scm:4035 msgid "" "RadeonTop monitors resource consumption on supported AMD\n" "Radeon Graphics Processing Units (GPUs), either in real time as bar graphs on\n" @@ -9078,11 +9758,11 @@ msgid "" "under OpenGL graphics workloads." msgstr "" -#: gnu/packages/linux.scm:3848 +#: gnu/packages/linux.scm:4071 msgid "Tool and library to manipulate EFI variables" msgstr "Værktøj og bibliotek til at manipulere EFI-variabler" -#: gnu/packages/linux.scm:3849 +#: gnu/packages/linux.scm:4072 msgid "" "This package provides a library and a command line\n" "interface to the variable facility of UEFI boot firmware." @@ -9090,11 +9770,11 @@ msgstr "" "Denne pakke tilbyder et bibliotek og en kommandolinje-\n" "grænseflade til variabelfaciliteten for UEFI-opstartsfirmware." -#: gnu/packages/linux.scm:3887 +#: gnu/packages/linux.scm:4110 msgid "Modify the Extensible Firmware Interface (EFI) boot manager" msgstr "" -#: gnu/packages/linux.scm:3889 +#: gnu/packages/linux.scm:4112 msgid "" "@code{efibootmgr} is a user-space application to modify the Intel\n" "Extensible Firmware Interface (EFI) Boot Manager. This application can\n" @@ -9102,11 +9782,11 @@ msgid "" "running boot option, and more." msgstr "" -#: gnu/packages/linux.scm:3925 +#: gnu/packages/linux.scm:4148 msgid "Performance monitoring tools for Linux" msgstr "" -#: gnu/packages/linux.scm:3926 +#: gnu/packages/linux.scm:4149 msgid "" "The sysstat utilities are a collection of performance\n" "monitoring tools for Linux. These include @code{mpstat}, @code{iostat},\n" @@ -9114,11 +9794,11 @@ msgid "" "@code{sadf} and @code{sa}." msgstr "" -#: gnu/packages/linux.scm:3958 +#: gnu/packages/linux.scm:4173 msgid "GNU/Linux application to control backlights" msgstr "" -#: gnu/packages/linux.scm:3960 +#: gnu/packages/linux.scm:4175 msgid "" "Light is a program to send commands to screen backlight controllers\n" "under GNU/Linux. Features include:\n" @@ -9134,11 +9814,11 @@ msgid "" "Light is the successor of lightscript." msgstr "" -#: gnu/packages/linux.scm:4064 +#: gnu/packages/linux.scm:4282 msgid "Power management tool for Linux" msgstr "Strømhåndteringsværktøj for Linux" -#: gnu/packages/linux.scm:4065 +#: gnu/packages/linux.scm:4283 msgid "" "TLP is a power management tool for Linux. It comes with\n" "a default configuration already optimized for battery life. Nevertheless,\n" @@ -9146,11 +9826,11 @@ msgid "" "every time the power supply source is changed." msgstr "" -#: gnu/packages/linux.scm:4092 +#: gnu/packages/linux.scm:4310 msgid "List hardware information" msgstr "Vis udstyrsinformation" -#: gnu/packages/linux.scm:4094 +#: gnu/packages/linux.scm:4312 msgid "" "@command{lshw} (Hardware Lister) is a small tool to provide\n" "detailed information on the hardware configuration of the machine.\n" @@ -9160,11 +9840,11 @@ msgid "" "machines (PowerMac G4 is known to work)." msgstr "" -#: gnu/packages/linux.scm:4117 +#: gnu/packages/linux.scm:4335 msgid "Netlink utility library" msgstr "" -#: gnu/packages/linux.scm:4118 +#: gnu/packages/linux.scm:4336 msgid "" "Libmnl is a minimalistic user-space library oriented to\n" "Netlink developers. There are a lot of common tasks in parsing, validating,\n" @@ -9173,11 +9853,11 @@ msgid "" "re-use code and to avoid re-inventing the wheel." msgstr "" -#: gnu/packages/linux.scm:4143 +#: gnu/packages/linux.scm:4361 msgid "Netlink programming interface to the Linux nf_tables subsystem" msgstr "" -#: gnu/packages/linux.scm:4144 +#: gnu/packages/linux.scm:4362 msgid "" "Libnftnl is a userspace library providing a low-level netlink\n" "programming interface to the in-kernel nf_tables subsystem. The library\n" @@ -9185,11 +9865,11 @@ msgid "" "used by nftables." msgstr "" -#: gnu/packages/linux.scm:4171 +#: gnu/packages/linux.scm:4389 msgid "Userspace utility for Linux packet filtering" msgstr "" -#: gnu/packages/linux.scm:4172 +#: gnu/packages/linux.scm:4390 msgid "" "nftables is the project that aims to replace the existing\n" "{ip,ip6,arp,eb}tables framework. Basically, this project provides a new packet\n" @@ -9199,11 +9879,11 @@ msgid "" "userspace queueing component and the logging subsystem." msgstr "" -#: gnu/packages/linux.scm:4270 +#: gnu/packages/linux.scm:4487 msgid "Unprivileged chroot, bind mount, and binfmt_misc" msgstr "" -#: gnu/packages/linux.scm:4272 +#: gnu/packages/linux.scm:4489 msgid "" "PRoot is a user-space implementation of @code{chroot}, @code{mount --bind},\n" "and @code{binfmt_misc}. This means that users don't need any privileges or\n" @@ -9216,15 +9896,15 @@ msgid "" "available in the kernel Linux." msgstr "" -#: gnu/packages/linux.scm:4288 +#: gnu/packages/linux.scm:4505 msgid "Unprivileged chroot, bind mount, and binfmt_misc (statically linked)" msgstr "" -#: gnu/packages/linux.scm:4334 +#: gnu/packages/linux.scm:4551 msgid "Linux tool to dump x86 CPUID information about the CPU(s)" msgstr "" -#: gnu/packages/linux.scm:4335 +#: gnu/packages/linux.scm:4552 msgid "" "cpuid dumps detailed information about the CPU(s) gathered\n" "from the CPUID instruction, and also determines the exact model of CPU(s). It\n" @@ -9232,22 +9912,22 @@ msgid "" "NexGen, Rise, and SiS CPUs." msgstr "" -#: gnu/packages/linux.scm:4362 +#: gnu/packages/linux.scm:4579 msgid "Use a FUSE file system to access data over MTP" msgstr "" -#: gnu/packages/linux.scm:4363 +#: gnu/packages/linux.scm:4580 msgid "" "jmtpfs uses FUSE (file system in userspace) to provide access\n" "to data over the Media Transfer Protocol (MTP). Unprivileged users can mount\n" "the MTP device as a file system." msgstr "" -#: gnu/packages/linux.scm:4386 +#: gnu/packages/linux.scm:4603 msgid "Utility to show process environment" msgstr "Redskab til at vise procesmiljø" -#: gnu/packages/linux.scm:4387 +#: gnu/packages/linux.scm:4604 msgid "" "Procenv is a command-line tool that displays as much detail about\n" "itself and its environment as possible. It can be used as a test\n" @@ -9255,11 +9935,11 @@ msgid "" "comparing system environments." msgstr "" -#: gnu/packages/linux.scm:4414 +#: gnu/packages/linux.scm:4631 msgid "Open Fabric Interfaces" msgstr "" -#: gnu/packages/linux.scm:4416 +#: gnu/packages/linux.scm:4633 msgid "" "OpenFabrics Interfaces (OFI) is a framework focused on exporting fabric\n" "communication services to applications. OFI is best described as a collection\n" @@ -9273,11 +9953,11 @@ msgid "" "libraries, which are often integrated directly into libfabric." msgstr "" -#: gnu/packages/linux.scm:4462 +#: gnu/packages/linux.scm:4679 msgid "Intel Performance Scaled Messaging (PSM) Libraries" msgstr "" -#: gnu/packages/linux.scm:4464 +#: gnu/packages/linux.scm:4681 msgid "" "The PSM Messaging API, or PSM API, is Intel's low-level user-level\n" "communications interface for the True Scale family of products. PSM users are\n" @@ -9285,22 +9965,22 @@ msgid "" "interfaces in parallel environments." msgstr "" -#: gnu/packages/linux.scm:4505 +#: gnu/packages/linux.scm:4722 msgid "Take screenshots of one or more Linux text consoles" msgstr "" -#: gnu/packages/linux.scm:4507 +#: gnu/packages/linux.scm:4724 msgid "" "snapscreenshot saves a screenshot of one or more Linux text consoles as a\n" "Targa (@dfn{.tga}) image. It can be used by anyone with read access to the\n" "relevant @file{/dev/vcs*} file(s)." msgstr "" -#: gnu/packages/linux.scm:4561 +#: gnu/packages/linux.scm:4778 msgid "Take a screenshot of the contents of the Linux framebuffer" msgstr "" -#: gnu/packages/linux.scm:4563 +#: gnu/packages/linux.scm:4780 msgid "" "fbcat saves the contents of the Linux framebuffer (@file{/dev/fb*}), or\n" "a dump therof. It supports a wide range of drivers and pixel formats.\n" @@ -9312,22 +9992,22 @@ msgid "" "emulates the behaviour of Gunnar Monell's older fbgrab utility." msgstr "" -#: gnu/packages/linux.scm:4594 +#: gnu/packages/linux.scm:4811 msgid "Control groups management tools" msgstr "" -#: gnu/packages/linux.scm:4595 +#: gnu/packages/linux.scm:4812 msgid "" "Control groups is Linux kernel method for process resource\n" "restriction, permission handling and more. This package provides userspace\n" "interface to this kernel feature." msgstr "" -#: gnu/packages/linux.scm:4628 +#: gnu/packages/linux.scm:4846 msgid "Control fan speed on Macbooks" msgstr "" -#: gnu/packages/linux.scm:4630 +#: gnu/packages/linux.scm:4848 msgid "" "mbpfan is a fan control daemon for Apple Macbooks. It uses input from\n" "the @code{coretemp} module and sets the fan speed using the @code{applesmc}\n" @@ -9335,11 +10015,11 @@ msgid "" "privileges." msgstr "" -#: gnu/packages/linux.scm:4673 +#: gnu/packages/linux.scm:4891 msgid "Intel Performance Scaled Messaging 2 (PSM2) library" msgstr "" -#: gnu/packages/linux.scm:4675 +#: gnu/packages/linux.scm:4893 msgid "" "This package is low-level user-level Intel's communications interface.\n" "The PSM2 API is a high-performance vendor-specific protocol that provides a\n" @@ -9347,11 +10027,11 @@ msgid "" "high-speed networking devices." msgstr "" -#: gnu/packages/linux.scm:4715 +#: gnu/packages/linux.scm:4933 msgid "Performance event monitoring library" msgstr "Bibliotek til at overvåge ydelseshændelser" -#: gnu/packages/linux.scm:4717 +#: gnu/packages/linux.scm:4935 msgid "" "This package provides a library called libpfm4, which is used to develop\n" "monitoring tools exploiting the performance monitoring events such as those\n" @@ -9366,6 +10046,19 @@ msgid "" "introduced in Linux 2.6.31." msgstr "" +#: gnu/packages/linux.scm:4963 +msgid "Low-level netfilter netlink communication library" +msgstr "" + +#: gnu/packages/linux.scm:4965 +msgid "" +"@code{libnfnetlink} is the low-level library for netfilter related\n" +"kernel/userspace communication. It provides a generic messaging\n" +"infrastructure for in-kernel netfilter subsystems (such as nfnetlink_log,\n" +"nfnetlink_queue, nfnetlink_conntrack) and their respective users and/or\n" +"management tools in userspace." +msgstr "" + #: gnu/packages/lout.scm:100 msgid "Document layout system" msgstr "" @@ -9389,11 +10082,11 @@ msgid "" "beginning." msgstr "" -#: gnu/packages/messaging.scm:117 +#: gnu/packages/messaging.scm:119 msgid "Off-the-Record (OTR) Messaging Library and Toolkit" msgstr "" -#: gnu/packages/messaging.scm:119 +#: gnu/packages/messaging.scm:121 msgid "" "OTR allows you to have private conversations over instant messaging by\n" "providing: (1) Encryption: No one else can read your instant messages. (2)\n" @@ -9406,11 +10099,11 @@ msgid "" "keys, no previous conversation is compromised." msgstr "" -#: gnu/packages/messaging.scm:153 +#: gnu/packages/messaging.scm:155 msgid "Implementation of a ratcheting forward secrecy protocol" msgstr "" -#: gnu/packages/messaging.scm:154 +#: gnu/packages/messaging.scm:156 msgid "" "libsignal-protocol-c is an implementation of a ratcheting\n" "forward secrecy protocol that works in synchronous and asynchronous\n" @@ -9418,11 +10111,11 @@ msgid "" "end-to-end encryption." msgstr "" -#: gnu/packages/messaging.scm:192 +#: gnu/packages/messaging.scm:197 msgid "IRC to instant messaging gateway" msgstr "" -#: gnu/packages/messaging.scm:193 +#: gnu/packages/messaging.scm:198 msgid "" "BitlBee brings IM (instant messaging) to IRC clients, for\n" "people who have an IRC client running all the time and don't want to run an\n" @@ -9433,10 +10126,20 @@ msgid "" msgstr "" #: gnu/packages/messaging.scm:244 -msgid "Graphical IRC Client" +msgid "Discord plugin for Bitlbee" +msgstr "Discord-udvidelsesmodul for Bitlbee" + +#: gnu/packages/messaging.scm:245 +msgid "" +"Bitlbee-discord is a plugin for Bitlbee witch provides\n" +"access to servers running the Discord protocol." msgstr "" -#: gnu/packages/messaging.scm:246 +#: gnu/packages/messaging.scm:292 +msgid "Graphical IRC Client" +msgstr "Grafisk IRC-klient" + +#: gnu/packages/messaging.scm:294 msgid "" "HexChat lets you connect to multiple IRC networks at once. The main\n" "window shows the list of currently connected networks and their channels, the\n" @@ -9445,11 +10148,11 @@ msgid "" "dictionaries. HexChat can be extended with multiple addons." msgstr "" -#: gnu/packages/messaging.scm:311 +#: gnu/packages/messaging.scm:359 msgid "Lightweight Internet Relay Chat server for small networks" msgstr "" -#: gnu/packages/messaging.scm:313 +#: gnu/packages/messaging.scm:361 msgid "" "ngIRCd is a lightweight @dfn{Internet Relay Chat} (IRC) server for small\n" "or private networks. It is easy to configure, can cope with dynamic IP\n" @@ -9457,21 +10160,21 @@ msgid "" "authentication." msgstr "" -#: gnu/packages/messaging.scm:385 +#: gnu/packages/messaging.scm:433 msgid "Graphical multi-protocol instant messaging client" msgstr "" -#: gnu/packages/messaging.scm:387 +#: gnu/packages/messaging.scm:435 msgid "" "Pidgin is a modular instant messaging client that supports many popular\n" "chat protocols." msgstr "" -#: gnu/packages/messaging.scm:425 +#: gnu/packages/messaging.scm:473 msgid "Off-the-Record Messaging plugin for Pidgin" msgstr "" -#: gnu/packages/messaging.scm:427 +#: gnu/packages/messaging.scm:475 msgid "" "Pidgin-OTR is a plugin that adds support for OTR to the Pidgin instant\n" "messaging client. OTR (Off-the-Record) Messaging allows you to have private\n" @@ -9486,34 +10189,34 @@ msgid "" "compromised." msgstr "" -#: gnu/packages/messaging.scm:478 +#: gnu/packages/messaging.scm:542 msgid "IRC network bouncer" msgstr "" -#: gnu/packages/messaging.scm:479 +#: gnu/packages/messaging.scm:543 msgid "" -"ZNC is an IRC network bouncer or BNC. It can detach the\n" -"client from the actual IRC server, and also from selected channels. Multiple\n" -"clients from different locations can connect to a single ZNC account\n" +"ZNC is an @dfn{IRC network bouncer} or @dfn{BNC}. It can\n" +"detach the client from the actual IRC server, and also from selected channels.\n" +"Multiple clients from different locations can connect to a single ZNC account\n" "simultaneously and therefore appear under the same nickname on IRC." msgstr "" -#: gnu/packages/messaging.scm:500 +#: gnu/packages/messaging.scm:564 msgid "Non-blocking Jabber/XMPP module" msgstr "" -#: gnu/packages/messaging.scm:502 +#: gnu/packages/messaging.scm:566 msgid "" "The goal of this python library is to provide a way for Python\n" "applications to use Jabber/XMPP networks in a non-blocking way. This library\n" "was initially a fork of xmpppy, but uses non-blocking sockets." msgstr "" -#: gnu/packages/messaging.scm:590 +#: gnu/packages/messaging.scm:652 msgid "Jabber (XMPP) client" msgstr "" -#: gnu/packages/messaging.scm:591 +#: gnu/packages/messaging.scm:653 msgid "" "Gajim is a feature-rich and easy to use Jabber/XMPP client.\n" "Among its features are: a tabbed chat window and single window modes; support\n" @@ -9522,21 +10225,21 @@ msgid "" "end-to-end encryption support; XML console." msgstr "" -#: gnu/packages/messaging.scm:660 +#: gnu/packages/messaging.scm:722 msgid "Graphical Jabber (XMPP) client" msgstr "" -#: gnu/packages/messaging.scm:661 +#: gnu/packages/messaging.scm:723 msgid "" "Dino is a Jabber (XMPP) client which aims to fit well into\n" "a graphical desktop environment like GNOME." msgstr "" -#: gnu/packages/messaging.scm:750 +#: gnu/packages/messaging.scm:812 msgid "Jabber (XMPP) server" msgstr "" -#: gnu/packages/messaging.scm:751 +#: gnu/packages/messaging.scm:813 msgid "" "Prosody is a modern XMPP communication server. It aims to\n" "be easy to set up and configure, and efficient with system resources.\n" @@ -9545,15 +10248,15 @@ msgid "" "protocols." msgstr "" -#: gnu/packages/messaging.scm:793 gnu/packages/messaging.scm:826 +#: gnu/packages/messaging.scm:848 gnu/packages/messaging.scm:882 msgid "Library for the Tox encrypted messenger protocol" msgstr "" -#: gnu/packages/messaging.scm:795 +#: gnu/packages/messaging.scm:850 msgid "C library implementation of the Tox encrypted messenger protocol." msgstr "C-biblioteksimplementering for den Tox-krypterede messengerprotokol." -#: gnu/packages/messaging.scm:828 +#: gnu/packages/messaging.scm:884 msgid "" "Official fork of the C library implementation of the Tox encrypted\n" "messenger protocol." @@ -9561,42 +10264,42 @@ msgstr "" "Officel forgrening af C-biblioteksimplementering for den\n" "Tox-krypterede messengerprotokol." -#: gnu/packages/messaging.scm:883 +#: gnu/packages/messaging.scm:939 msgid "Lightweight Tox client" msgstr "Simpel Tox-klient" -#: gnu/packages/messaging.scm:885 +#: gnu/packages/messaging.scm:941 msgid "" "Utox is a lightweight Tox client. Tox is a distributed and secure\n" "instant messenger with audio and video chat capabilities." msgstr "" -#: gnu/packages/messaging.scm:942 +#: gnu/packages/messaging.scm:998 msgid "Tox chat client using Qt" msgstr "Tox-snakkeklient der bruger Qt" -#: gnu/packages/messaging.scm:943 +#: gnu/packages/messaging.scm:999 msgid "" "qTox is a Tox client that follows the Tox design\n" "guidelines. It provides an easy to use application that allows you to\n" "connect with friends and family without anyone else listening in." msgstr "" -#: gnu/packages/messaging.scm:1036 +#: gnu/packages/messaging.scm:1092 msgid "" "Distributed and trustless peer-to-peer communications protocol\n" "for sending encrypted messages to one person or many subscribers." msgstr "" -#: gnu/packages/messaging.scm:1038 +#: gnu/packages/messaging.scm:1094 msgid "Distributed peer-to-peer communication" msgstr "" -#: gnu/packages/messaging.scm:1057 +#: gnu/packages/messaging.scm:1113 msgid "Multi-user chat program" msgstr "" -#: gnu/packages/messaging.scm:1058 +#: gnu/packages/messaging.scm:1114 msgid "" "Ytalk is a replacement for the BSD talk program. Its main\n" "advantage is the ability to communicate with any arbitrary number of users at\n" @@ -9604,11 +10307,11 @@ msgid "" "with several different talk daemons at the same time." msgstr "" -#: gnu/packages/messaging.scm:1083 +#: gnu/packages/messaging.scm:1139 msgid "Portable high-level Jabber/XMPP library for C++" msgstr "" -#: gnu/packages/messaging.scm:1085 +#: gnu/packages/messaging.scm:1141 msgid "" "gloox is a full-featured Jabber/XMPP client library,\n" "written in ANSI C++. It makes writing spec-compliant clients easy\n" @@ -9616,7 +10319,7 @@ msgid "" "into existing applications." msgstr "" -#: gnu/packages/messaging.scm:1158 +#: gnu/packages/messaging.scm:1216 msgid "" "@code{Net::PSYC} with support for TCP, UDP, Event.pm, @code{IO::Select} and\n" "Gtk2 event loops. This package includes 12 applications and additional scripts:\n" @@ -9624,26 +10327,26 @@ msgid "" "for @uref{https://torproject.org,tor} router) and many more." msgstr "" -#: gnu/packages/messaging.scm:1162 +#: gnu/packages/messaging.scm:1220 msgid "Perl implementation of PSYC protocol" msgstr "Perlimplementering af PSYC-protokollen" -#: gnu/packages/messaging.scm:1201 +#: gnu/packages/messaging.scm:1259 msgid "" "@code{libpsyc} is a PSYC library in C which implements\n" "core aspects of PSYC, useful for all kinds of clients and servers\n" "including psyced." msgstr "" -#: gnu/packages/messaging.scm:1204 +#: gnu/packages/messaging.scm:1262 msgid "PSYC library in C" msgstr "" -#: gnu/packages/messaging.scm:1271 +#: gnu/packages/messaging.scm:1329 msgid "psycLPC is a multi-user network server programming language" msgstr "" -#: gnu/packages/messaging.scm:1273 +#: gnu/packages/messaging.scm:1331 msgid "" "LPC is a bytecode language, invented to specifically implement\n" "multi user virtual environments on the internet. This technology is used for\n" @@ -9652,7 +10355,7 @@ msgid "" "many bug fixes." msgstr "" -#: gnu/packages/messaging.scm:1304 +#: gnu/packages/messaging.scm:1362 msgid "" "Loudmouth is a lightweight and easy-to-use C library for programming\n" "with the XMPP (formerly known as Jabber) protocol. It is designed to be\n" @@ -9660,11 +10363,11 @@ msgid "" "protocol allows." msgstr "" -#: gnu/packages/messaging.scm:1308 +#: gnu/packages/messaging.scm:1366 msgid "Asynchronous XMPP library" msgstr "" -#: gnu/packages/messaging.scm:1340 +#: gnu/packages/messaging.scm:1398 msgid "" "Mcabber is a small XMPP (Jabber) console client, which includes features\n" "such as SASL and TLS support, @dfn{Multi-User Chat} (MUC) support, logging,\n" @@ -9672,15 +10375,15 @@ msgid "" "support, and more." msgstr "" -#: gnu/packages/messaging.scm:1344 +#: gnu/packages/messaging.scm:1402 msgid "Small XMPP console client" msgstr "Lille XMPP-konsolklient" -#: gnu/packages/messaging.scm:1390 +#: gnu/packages/messaging.scm:1448 msgid "Extensible console-based Jabber client" msgstr "" -#: gnu/packages/messaging.scm:1392 +#: gnu/packages/messaging.scm:1450 msgid "" "GNU Freetalk is a command-line Jabber/XMPP chat client. It notably uses\n" "the Readline library to handle input, so it features convenient navigation of\n" @@ -9688,39 +10391,39 @@ msgid "" "is also scriptable and extensible via Guile." msgstr "" -#: gnu/packages/messaging.scm:1426 gnu/packages/messaging.scm:1461 +#: gnu/packages/messaging.scm:1479 gnu/packages/messaging.scm:1508 msgid "C library for writing XMPP clients" msgstr "C-bibliotek til at skrive XMPP-klienter" -#: gnu/packages/messaging.scm:1427 +#: gnu/packages/messaging.scm:1480 msgid "" "Libmesode is a fork of libstrophe for use with Profanity\n" "XMPP Client. In particular, libmesode provides extra TLS functionality such as\n" "manual SSL certificate verification." msgstr "" -#: gnu/packages/messaging.scm:1462 +#: gnu/packages/messaging.scm:1509 msgid "" "Libstrophe is a minimal XMPP library written in C. It has\n" "almost no external dependencies, only an XML parsing library (expat or libxml\n" "are both supported)." msgstr "" -#: gnu/packages/messaging.scm:1498 +#: gnu/packages/messaging.scm:1545 msgid "Console-based XMPP client" msgstr "" -#: gnu/packages/messaging.scm:1499 +#: gnu/packages/messaging.scm:1546 msgid "" "Profanity is a console based XMPP client written in C\n" "using ncurses and libmesode, inspired by Irssi." msgstr "" -#: gnu/packages/messaging.scm:1529 +#: gnu/packages/messaging.scm:1575 msgid "Library implementing the client IRC protocol" msgstr "Bibliotek der implementerer IRC-protokollen for klienten" -#: gnu/packages/messaging.scm:1530 +#: gnu/packages/messaging.scm:1576 msgid "" "Libircclient is a library which implements the client IRC\n" "protocol. It is designed to be small, fast, portable and compatible with the\n" @@ -9728,32 +10431,81 @@ msgid "" "building the IRC clients and bots." msgstr "" -#: gnu/packages/messaging.scm:1580 +#: gnu/packages/messaging.scm:1626 msgid "Tox chat client using ncurses" msgstr "Tox-snakkeklient der bruger ncurses" -#: gnu/packages/messaging.scm:1581 +#: gnu/packages/messaging.scm:1627 msgid "" "Toxic is a console-based instant messaging client, using\n" "c-toxcore and ncurses. It provides audio calls, sound and desktop\n" "notifications, and Python scripting support." msgstr "" -#: gnu/packages/mpd.scm:82 +#: gnu/packages/messaging.scm:1653 +msgid "Qt5 client library for the Matrix instant messaging protocol" +msgstr "" + +#: gnu/packages/messaging.scm:1654 +msgid "" +"libqmatrixclient is a Qt5 library to write clients for the\n" +"Matrix instant messaging protocol. Quaternion is the reference client\n" +"implementation. Quaternion and libqmatrixclient together form the\n" +"QMatrixClient project." +msgstr "" + +#: gnu/packages/messaging.scm:1700 +msgid "Graphical client for the Matrix instant messaging protocol" +msgstr "" + +#: gnu/packages/messaging.scm:1701 +msgid "" +"Quaternion is a Qt5 desktop client for the Matrix instant\n" +"messaging protocol. It uses libqmatrixclient and is its reference client\n" +"implementation. Quaternion and libqmatriclient together form the\n" +"QMatrixClient project." +msgstr "" + +#: gnu/packages/messaging.scm:1740 +msgid "Instant messaging client for Google Hangouts" +msgstr "" + +#: gnu/packages/messaging.scm:1742 +msgid "" +"Hangups is an instant messaging client for Google Hangouts. It includes\n" +"both a Python library and a reference client with a text-based user interface.\n" +"\n" +"Hangups is implements a reverse-engineered version of Hangouts' proprietary,\n" +"non-interoperable protocol, which allows it to support features like group\n" +"messaging that aren’t available to clients that connect over XMPP." +msgstr "" + +#: gnu/packages/messaging.scm:1822 +msgid "Telegram messaging support for Pidgin" +msgstr "" + +#: gnu/packages/messaging.scm:1824 +msgid "" +"Telegram-purple is a plugin for Libpurple, the communication library\n" +"used by the Pidgin instant messaging client, that adds support for the\n" +"Telegram messenger." +msgstr "" + +#: gnu/packages/mpd.scm:84 msgid "Music Player Daemon client library" msgstr "Klientbibliotek for Music Player Daemon" -#: gnu/packages/mpd.scm:83 +#: gnu/packages/mpd.scm:85 msgid "" "A stable, documented, asynchronous API library for\n" "interfacing MPD in the C, C++ & Objective C languages." msgstr "" -#: gnu/packages/mpd.scm:154 +#: gnu/packages/mpd.scm:157 msgid "Music Player Daemon" msgstr "Music Player Daemon" -#: gnu/packages/mpd.scm:155 +#: gnu/packages/mpd.scm:158 msgid "" "Music Player Daemon (MPD) is a flexible, powerful,\n" "server-side application for playing music. Through plugins and libraries it\n" @@ -9761,11 +10513,11 @@ msgid "" "protocol." msgstr "" -#: gnu/packages/mpd.scm:178 +#: gnu/packages/mpd.scm:183 msgid "Music Player Daemon client" msgstr "Music Player - dæmonklient" -#: gnu/packages/mpd.scm:179 +#: gnu/packages/mpd.scm:184 msgid "" "MPC is a minimalist command line interface to MPD, the music\n" "player daemon." @@ -9773,21 +10525,21 @@ msgstr "" "MPC er en minimalistisk kommandolinjegrænseflade til MPD,\n" "musikafspillerdæmonen." -#: gnu/packages/mpd.scm:202 +#: gnu/packages/mpd.scm:227 msgid "Curses Music Player Daemon client" msgstr "" -#: gnu/packages/mpd.scm:203 +#: gnu/packages/mpd.scm:228 msgid "" "ncmpc is a fully featured MPD client, which runs in a\n" "terminal using ncurses." msgstr "" -#: gnu/packages/mpd.scm:233 +#: gnu/packages/mpd.scm:258 msgid "Featureful ncurses based MPD client inspired by ncmpc" msgstr "" -#: gnu/packages/mpd.scm:234 +#: gnu/packages/mpd.scm:259 msgid "" "Ncmpcpp is an mpd client with a UI very similar to ncmpc,\n" "but it provides new useful features such as support for regular expressions\n" @@ -9795,42 +10547,42 @@ msgid "" "sort playlists, and a local file system browser." msgstr "" -#: gnu/packages/mpd.scm:257 +#: gnu/packages/mpd.scm:282 msgid "MPD client for track scrobbling" msgstr "" -#: gnu/packages/mpd.scm:258 +#: gnu/packages/mpd.scm:283 msgid "" "mpdscribble is a Music Player Daemon client which submits\n" "information about tracks being played to a scrobbler, such as Libre.FM." msgstr "" -#: gnu/packages/mpd.scm:281 +#: gnu/packages/mpd.scm:306 msgid "Python MPD client library" msgstr "" -#: gnu/packages/mpd.scm:282 +#: gnu/packages/mpd.scm:307 msgid "" "Python-mpd2 is a Python library which provides a client\n" "interface for the Music Player Daemon." msgstr "" -#: gnu/packages/mpd.scm:331 +#: gnu/packages/mpd.scm:356 msgid "Elegant client for the Music Player Daemon" msgstr "" -#: gnu/packages/mpd.scm:332 +#: gnu/packages/mpd.scm:357 msgid "" "Sonata is an elegant graphical client for the Music Player\n" "Daemon (MPD). It supports playlists, multiple profiles (connecting to different\n" "MPD servers, search and multimedia key support." msgstr "" -#: gnu/packages/netpbm.scm:178 +#: gnu/packages/netpbm.scm:179 msgid "Toolkit for manipulation of images" msgstr "" -#: gnu/packages/netpbm.scm:180 +#: gnu/packages/netpbm.scm:181 msgid "" "Netpbm is a toolkit for the manipulation of graphic images, including\n" "the conversion of images between a variety of different formats.\n" @@ -9850,11 +10602,11 @@ msgid "" "themselves." msgstr "" -#: gnu/packages/networking.scm:108 +#: gnu/packages/networking.scm:120 msgid "Viewing and manipulating MAC addresses of network interfaces" msgstr "" -#: gnu/packages/networking.scm:109 +#: gnu/packages/networking.scm:121 msgid "" "GNU MAC Changer is a utility for viewing and changing MAC\n" "addresses of networking devices. New addresses may be set explicitly or\n" @@ -9862,22 +10614,22 @@ msgid "" "or, more generally, MAC addresses of the same category of hardware." msgstr "" -#: gnu/packages/networking.scm:137 +#: gnu/packages/networking.scm:149 msgid "Teredo IPv6 tunneling software" msgstr "" -#: gnu/packages/networking.scm:139 +#: gnu/packages/networking.scm:151 msgid "" "Miredo is an implementation (client, relay, server) of the Teredo\n" "specification, which provides IPv6 Internet connectivity to IPv6 enabled hosts\n" "residing in IPv4-only networks, even when they are behind a NAT device." msgstr "" -#: gnu/packages/networking.scm:161 +#: gnu/packages/networking.scm:173 msgid "Open bidirectional communication channels from the command line" msgstr "" -#: gnu/packages/networking.scm:163 +#: gnu/packages/networking.scm:175 msgid "" "socat is a relay for bidirectional data transfer between two independent\n" "data channels---files, pipes, devices, sockets, etc. It can create\n" @@ -9890,22 +10642,22 @@ msgid "" "or server shell scripts with network connections." msgstr "" -#: gnu/packages/networking.scm:244 +#: gnu/packages/networking.scm:256 msgid "Monitor and filter incoming requests for network services" msgstr "" -#: gnu/packages/networking.scm:245 +#: gnu/packages/networking.scm:257 msgid "" "With this package you can monitor and filter incoming requests for\n" "network services. It includes a library which may be used by daemons to\n" "transparently check connection attempts against an access control list." msgstr "" -#: gnu/packages/networking.scm:265 +#: gnu/packages/networking.scm:277 msgid "Library for message-based applications" msgstr "" -#: gnu/packages/networking.scm:267 +#: gnu/packages/networking.scm:279 msgid "" "The 0MQ lightweight messaging kernel is a library which extends the\n" "standard socket interfaces with features traditionally provided by specialized\n" @@ -9915,53 +10667,63 @@ msgid "" "more." msgstr "" -#: gnu/packages/networking.scm:305 +#: gnu/packages/networking.scm:317 msgid "High-level C bindings for ØMQ" msgstr "C-bindinger for ØMQ på højere niveau" -#: gnu/packages/networking.scm:307 +#: gnu/packages/networking.scm:319 msgid "" "czmq provides bindings for the ØMQ core API that hides the differences\n" "between different versions of ØMQ." msgstr "" -#: gnu/packages/networking.scm:342 +#: gnu/packages/networking.scm:346 +msgid "C++ bindings for the ØMQ messaging library" +msgstr "C++-bindinger for ØMQ-beskedbiblioteket" + +#: gnu/packages/networking.scm:348 +msgid "" +"This package provides header-only C++ bindings for ØMQ. The header\n" +"files contain direct mappings of the abstractions provided by the ØMQ C API." +msgstr "" + +#: gnu/packages/networking.scm:383 msgid "Apache Kafka C/C++ client library" msgstr "Apache Kafka C/C++-klientbibliotek" -#: gnu/packages/networking.scm:344 +#: gnu/packages/networking.scm:385 msgid "" "librdkafka is a C library implementation of the Apache Kafka protocol,\n" "containing both Producer and Consumer support." msgstr "" -#: gnu/packages/networking.scm:361 +#: gnu/packages/networking.scm:402 msgid "Library for Neighbor Discovery Protocol" msgstr "Bibliotek for Neighbor Discovery Protocol" -#: gnu/packages/networking.scm:363 +#: gnu/packages/networking.scm:404 msgid "" "libndp contains a library which provides a wrapper for IPv6 Neighbor\n" "Discovery Protocol. It also provides a tool named ndptool for sending and\n" "receiving NDP messages." msgstr "" -#: gnu/packages/networking.scm:381 +#: gnu/packages/networking.scm:422 msgid "Display or change Ethernet device settings" msgstr "" -#: gnu/packages/networking.scm:383 +#: gnu/packages/networking.scm:424 msgid "" "ethtool can be used to query and change settings such as speed,\n" "auto-negotiation and checksum offload on many network devices, especially\n" "Ethernet devices." msgstr "" -#: gnu/packages/networking.scm:420 +#: gnu/packages/networking.scm:463 msgid "Text based network interface status monitor" msgstr "" -#: gnu/packages/networking.scm:422 +#: gnu/packages/networking.scm:465 msgid "" "IFStatus is a simple, easy-to-use program for displaying commonly\n" "needed/wanted real-time traffic statistics of multiple network\n" @@ -9969,11 +10731,11 @@ msgid "" "intended as a substitute for the PPPStatus and EthStatus projects." msgstr "" -#: gnu/packages/networking.scm:442 +#: gnu/packages/networking.scm:485 msgid "Realtime console network usage monitor" msgstr "" -#: gnu/packages/networking.scm:444 +#: gnu/packages/networking.scm:487 msgid "" "Nload is a console application which monitors network traffic and\n" "bandwidth usage in real time. It visualizes the in- and outgoing traffic using\n" @@ -9981,11 +10743,11 @@ msgid "" "and min/max network usage." msgstr "" -#: gnu/packages/networking.scm:487 +#: gnu/packages/networking.scm:530 msgid "Tunnel IPv4 data through a DNS server" msgstr "" -#: gnu/packages/networking.scm:488 +#: gnu/packages/networking.scm:531 msgid "" "Iodine tunnels IPv4 data through a DNS server. This\n" "can be useful in different situations where internet access is firewalled, but\n" @@ -9993,11 +10755,11 @@ msgid "" "and up to 1 Mbit/s downstream." msgstr "" -#: gnu/packages/networking.scm:526 +#: gnu/packages/networking.scm:568 msgid "Intelligent client for the WHOIS directory service" msgstr "" -#: gnu/packages/networking.scm:528 +#: gnu/packages/networking.scm:570 msgid "" "whois searches for an object in a @dfn{WHOIS} (RFC 3912) database.\n" "It is commonly used to look up the registered users or assignees of an Internet\n" @@ -10009,22 +10771,22 @@ msgid "" "of the same name." msgstr "" -#: gnu/packages/networking.scm:585 +#: gnu/packages/networking.scm:645 msgid "Network traffic analyzer" msgstr "" -#: gnu/packages/networking.scm:586 +#: gnu/packages/networking.scm:646 msgid "" "Wireshark is a network protocol analyzer, or @dfn{packet\n" "sniffer}, that lets you capture and interactively browse the contents of\n" "network frames." msgstr "" -#: gnu/packages/networking.scm:606 +#: gnu/packages/networking.scm:666 msgid "Send ICMP ECHO_REQUEST packets to network hosts" msgstr "" -#: gnu/packages/networking.scm:608 +#: gnu/packages/networking.scm:668 msgid "" "fping is a ping like program which uses the Internet Control Message\n" "Protocol (ICMP) echo request to determine if a target host is responding.\n" @@ -10035,11 +10797,22 @@ msgid "" "fashion." msgstr "" -#: gnu/packages/networking.scm:642 +#: gnu/packages/networking.scm:719 +msgid "Command-line interface to the Gandi.net Web API" +msgstr "Kommandolinjegrænseflade til Gandi.net Web API'en" + +#: gnu/packages/networking.scm:721 +msgid "" +"This package provides a command-line client (@command{gandi}) to buy,\n" +"manage, and delete Internet resources from Gandi.net such as domain names,\n" +"virtual machines, and certificates." +msgstr "" + +#: gnu/packages/networking.scm:751 msgid "Web server latency and throughput monitor" msgstr "" -#: gnu/packages/networking.scm:644 +#: gnu/packages/networking.scm:753 msgid "" "httping measures how long it takes to connect to a web server, send an\n" "HTTP(S) request, and receive the reply headers. It is somewhat similar to\n" @@ -10048,11 +10821,11 @@ msgid "" "application stack itself." msgstr "" -#: gnu/packages/networking.scm:675 +#: gnu/packages/networking.scm:784 msgid "Visualize curl statistics" msgstr "" -#: gnu/packages/networking.scm:677 +#: gnu/packages/networking.scm:786 msgid "" "@command{httpstat} is a tool to visualize statistics from the\n" "@command{curl} HTTP client. It acts as a wrapper for @command{curl} and\n" @@ -10060,21 +10833,21 @@ msgid "" "TCP connection, TLS handshake and so on) in the terminal." msgstr "" -#: gnu/packages/networking.scm:697 +#: gnu/packages/networking.scm:806 msgid "Console based live network and disk I/O bandwidth monitor" msgstr "" -#: gnu/packages/networking.scm:698 +#: gnu/packages/networking.scm:807 msgid "" "Bandwidth Monitor NG is a small and simple console based\n" "live network and disk I/O bandwidth monitor." msgstr "" -#: gnu/packages/networking.scm:752 +#: gnu/packages/networking.scm:867 msgid "Assess WiFi network security" msgstr "" -#: gnu/packages/networking.scm:754 +#: gnu/packages/networking.scm:869 msgid "" "Aircrack-ng is a complete suite of tools to assess WiFi network\n" "security. It focuses on different areas of WiFi security: monitoring,\n" @@ -10082,105 +10855,118 @@ msgid "" "allows for heavy scripting." msgstr "" -#: gnu/packages/networking.scm:779 +#: gnu/packages/networking.scm:893 +msgid "IPv4 and IPv6 validation methods" +msgstr "" + +#: gnu/packages/networking.scm:895 +msgid "" +"This module provides several IP address validation subroutines that both\n" +"validate and untaint their input. This includes both basic validation\n" +"(@code{is_ipv4()} and @code{is_ipv6()}) and special cases like checking whether\n" +"an address belongs to a specific network or whether an address is public or\n" +"private (reserved)." +msgstr "" + +#: gnu/packages/networking.scm:923 msgid "Perl Interface to the Domain Name System" msgstr "" -#: gnu/packages/networking.scm:780 +#: gnu/packages/networking.scm:924 msgid "Net::DNS is the Perl Interface to the Domain Name System." msgstr "" -#: gnu/packages/networking.scm:811 +#: gnu/packages/networking.scm:955 msgid "IPv6 related part of the C socket.h defines and structure manipulators for Perl" msgstr "" -#: gnu/packages/networking.scm:812 +#: gnu/packages/networking.scm:956 msgid "" "Socket6 binds the IPv6 related part of the C socket header\n" "definitions and structure manipulators for Perl." msgstr "" -#: gnu/packages/networking.scm:838 +#: gnu/packages/networking.scm:982 msgid "Programmable DNS resolver class for offline emulation of DNS" msgstr "" -#: gnu/packages/networking.scm:839 +#: gnu/packages/networking.scm:983 msgid "" "Net::DNS::Resolver::Programmable is a programmable DNS resolver for\n" "offline emulation of DNS." msgstr "" -#: gnu/packages/networking.scm:872 +#: gnu/packages/networking.scm:1016 msgid "Manages IPv4 and IPv6 addresses and subnets" msgstr "" -#: gnu/packages/networking.scm:873 +#: gnu/packages/networking.scm:1017 msgid "NetAddr::IP manages IPv4 and IPv6 addresses and subsets." msgstr "" -#: gnu/packages/networking.scm:897 +#: gnu/packages/networking.scm:1041 msgid "Patricia Trie Perl module for fast IP address lookups" msgstr "" -#: gnu/packages/networking.scm:899 +#: gnu/packages/networking.scm:1043 msgid "Net::Patricia does IP address lookups quickly in Perl." msgstr "" -#: gnu/packages/networking.scm:922 +#: gnu/packages/networking.scm:1066 msgid "Perl extension for merging IPv4 or IPv6 CIDR addresses" msgstr "" -#: gnu/packages/networking.scm:923 +#: gnu/packages/networking.scm:1067 msgid "Net::CIDR::Lite merges IPv4 or IPv6 CIDR addresses." msgstr "" -#: gnu/packages/networking.scm:945 +#: gnu/packages/networking.scm:1089 msgid "Look up location and network information by IP Address in Perl" msgstr "" -#: gnu/packages/networking.scm:946 +#: gnu/packages/networking.scm:1090 msgid "" "The Perl module 'Geo::IP'. It looks up location and network\n" "information by IP Address." msgstr "" -#: gnu/packages/networking.scm:975 +#: gnu/packages/networking.scm:1119 msgid "Perl object interface for AF_INET/AF_INET6 domain sockets" msgstr "" -#: gnu/packages/networking.scm:976 +#: gnu/packages/networking.scm:1120 msgid "" "IO::Socket::INET6 is an interface for AF_INET/AF_INET6 domain\n" "sockets in Perl." msgstr "" -#: gnu/packages/networking.scm:1005 +#: gnu/packages/networking.scm:1149 msgid "Library providing automatic proxy configuration management" msgstr "" -#: gnu/packages/networking.scm:1006 +#: gnu/packages/networking.scm:1150 msgid "" "Libproxy handles the details of HTTP/HTTPS proxy\n" "configuration for applications across all scenarios. Applications using\n" "libproxy only have to specify which proxy to use." msgstr "" -#: gnu/packages/networking.scm:1039 +#: gnu/packages/networking.scm:1186 msgid "Redirect any TCP connection through a proxy or proxy chain" msgstr "" -#: gnu/packages/networking.scm:1040 +#: gnu/packages/networking.scm:1187 msgid "" "Proxychains-ng is a preloader which hooks calls to sockets\n" "in dynamically linked programs and redirects them through one or more SOCKS or\n" "HTTP proxies." msgstr "" -#: gnu/packages/networking.scm:1061 +#: gnu/packages/networking.scm:1208 msgid "Network communication layer on top of UDP" msgstr "" -#: gnu/packages/networking.scm:1063 +#: gnu/packages/networking.scm:1210 msgid "" "ENet's purpose is to provide a relatively thin, simple and robust network\n" "communication layer on top of UDP. The primary feature it provides is optional\n" @@ -10190,11 +10976,11 @@ msgid "" "library remains flexible, portable, and easily embeddable." msgstr "" -#: gnu/packages/networking.scm:1127 +#: gnu/packages/networking.scm:1274 msgid "Applicative network protocol demultiplexer" msgstr "" -#: gnu/packages/networking.scm:1129 +#: gnu/packages/networking.scm:1276 msgid "" "sslh is a network protocol demultiplexer. It acts like a switchboard,\n" "accepting connections from clients on one port and forwarding them to different\n" @@ -10206,11 +10992,11 @@ msgid "" "that block port 22." msgstr "" -#: gnu/packages/networking.scm:1152 +#: gnu/packages/networking.scm:1299 msgid "TCP, UDP and SCTP bandwidth measurement tool" msgstr "" -#: gnu/packages/networking.scm:1154 +#: gnu/packages/networking.scm:1301 msgid "" "iPerf is a tool to measure achievable bandwidth on IP networks. It\n" "supports tuning of various parameters related to timing, buffers and\n" @@ -10218,11 +11004,11 @@ msgid "" "the bandwidth, loss, and other parameters." msgstr "" -#: gnu/packages/networking.scm:1187 +#: gnu/packages/networking.scm:1334 msgid "Per-process bandwidth monitor" msgstr "" -#: gnu/packages/networking.scm:1188 +#: gnu/packages/networking.scm:1335 msgid "" "NetHogs is a small 'net top' tool for Linux. Instead of\n" "breaking the traffic down per protocol or per subnet, like most tools do, it\n" @@ -10234,11 +11020,11 @@ msgid "" "gone wild and are suddenly taking up your bandwidth." msgstr "" -#: gnu/packages/networking.scm:1234 +#: gnu/packages/networking.scm:1381 msgid "Usenet binary file downloader" msgstr "" -#: gnu/packages/networking.scm:1236 +#: gnu/packages/networking.scm:1383 msgid "" "NZBGet is a binary newsgrabber, which downloads files from Usenet based\n" "on information given in @code{nzb} files. NZBGet can be used in standalone\n" @@ -10248,11 +11034,11 @@ msgid "" "procedure calls (RPCs)." msgstr "" -#: gnu/packages/networking.scm:1290 +#: gnu/packages/networking.scm:1437 msgid "Virtual network switch" msgstr "" -#: gnu/packages/networking.scm:1293 +#: gnu/packages/networking.scm:1440 msgid "" "Open vSwitch is a multilayer virtual switch. It is designed to enable\n" "massive network automation through programmatic extension, while still\n" @@ -10260,54 +11046,54 @@ msgid "" "IPFIX, RSPAN, CLI, LACP, 802.1ag)." msgstr "" -#: gnu/packages/networking.scm:1315 +#: gnu/packages/networking.scm:1462 msgid "Python class and tools for handling IP addresses and networks" msgstr "" -#: gnu/packages/networking.scm:1316 +#: gnu/packages/networking.scm:1463 msgid "" "The @code{IP} class allows a comfortable parsing and\n" "handling for most notations in use for IPv4 and IPv6 addresses and\n" "networks." msgstr "" -#: gnu/packages/networking.scm:1339 +#: gnu/packages/networking.scm:1487 msgid "Internet bandwidth tester" msgstr "" -#: gnu/packages/networking.scm:1341 +#: gnu/packages/networking.scm:1489 msgid "" "Command line interface for testing internet bandwidth using\n" "speedtest.net." msgstr "" -#: gnu/packages/networking.scm:1359 +#: gnu/packages/networking.scm:1507 msgid "HPA's tftp client" msgstr "" -#: gnu/packages/networking.scm:1361 +#: gnu/packages/networking.scm:1509 msgid "" "This is a tftp client derived from OpenBSD tftp with some extra options\n" "added and bugs fixed. The source includes readline support but it is not\n" "enabled due to license conflicts between the BSD advertising clause and the GPL." msgstr "" -#: gnu/packages/networking.scm:1389 +#: gnu/packages/networking.scm:1537 msgid "Small Ident Daemon" msgstr "" -#: gnu/packages/networking.scm:1391 +#: gnu/packages/networking.scm:1539 msgid "" "@dfn{Pidentd} (Peter's Ident Daemon) is a identd, which implements a\n" "identification server. Pidentd looks up specific TCP/IP connections and\n" "returns the user name and other information about the connection." msgstr "" -#: gnu/packages/networking.scm:1438 +#: gnu/packages/networking.scm:1586 msgid "Create secure pipes between sockets" msgstr "" -#: gnu/packages/networking.scm:1439 +#: gnu/packages/networking.scm:1587 msgid "" "Spiped (pronounced \"ess-pipe-dee\") is a utility for creating\n" "symmetrically encrypted and authenticated pipes between socket addresses, so\n" @@ -10317,11 +11103,11 @@ msgid "" "does not use SSH and requires a pre-shared symmetric key." msgstr "" -#: gnu/packages/networking.scm:1466 +#: gnu/packages/networking.scm:1614 msgid "Routing Software Suite" msgstr "" -#: gnu/packages/networking.scm:1467 +#: gnu/packages/networking.scm:1615 msgid "" "Quagga is a routing software suite, providing implementations\n" "of OSPFv2, OSPFv3, RIP v1 and v2, RIPng and BGP-4 for Unix platforms.\n" @@ -10333,22 +11119,22 @@ msgid "" "updates to the zebra daemon." msgstr "" -#: gnu/packages/networking.scm:1518 +#: gnu/packages/networking.scm:1666 msgid "IPv6 security research toolkit" msgstr "" -#: gnu/packages/networking.scm:1519 +#: gnu/packages/networking.scm:1667 msgid "" "The THC IPv6 Toolkit provides command-line tools and a library\n" "for researching IPv6 implementations and deployments. It requires Linux 2.6 or\n" "newer and only works on Ethernet network interfaces." msgstr "" -#: gnu/packages/networking.scm:1545 +#: gnu/packages/networking.scm:1693 msgid "Bandwidth monitor" msgstr "" -#: gnu/packages/networking.scm:1546 +#: gnu/packages/networking.scm:1694 msgid "" "bmon is a monitoring and debugging tool to capture\n" "networking-related statistics and prepare them visually in a human-friendly\n" @@ -10356,11 +11142,11 @@ msgid "" "interface and a programmable text output for scripting." msgstr "" -#: gnu/packages/networking.scm:1588 +#: gnu/packages/networking.scm:1734 msgid "Framework for low-level network packet construction" msgstr "" -#: gnu/packages/networking.scm:1590 +#: gnu/packages/networking.scm:1736 msgid "" "Libnet provides a fairly portable framework for network packet\n" "construction and injection. It features portable packet creation interfaces\n" @@ -10369,11 +11155,11 @@ msgid "" "can be whipped up with little effort." msgstr "" -#: gnu/packages/networking.scm:1618 +#: gnu/packages/networking.scm:1764 msgid "Network diagnostic tool" msgstr "" -#: gnu/packages/networking.scm:1620 +#: gnu/packages/networking.scm:1766 msgid "" "@dfn{mtr} (My TraceRoute) combines the functionality of the\n" "@command{traceroute} and @command{ping} programs in a single network diagnostic\n" @@ -10383,48 +11169,192 @@ msgid "" "displays the results in real time." msgstr "" -#: gnu/packages/networking.scm:1672 +#: gnu/packages/networking.scm:1818 msgid "IKEv1/v2 keying daemon" msgstr "" -#: gnu/packages/networking.scm:1673 +#: gnu/packages/networking.scm:1819 msgid "" "StrongSwan is an IPsec implementation originally based upon\n" "the FreeS/WAN project. It contains support for IKEv1, IKEv2, MOBIKE, IPv6,\n" "NAT-T and more." msgstr "" -#: gnu/packages/pdf.scm:121 +#: gnu/packages/networking.scm:1902 +msgid "Peer-to-peer client for the eD2K and Kademlia networks" +msgstr "" + +#: gnu/packages/networking.scm:1904 +msgid "" +"aMule is an eMule-like client for the eD2k and Kademlia peer-to-peer\n" +"file sharing networks. It includes a graphical user interface (GUI), a daemon\n" +"allowing you to run a client with no graphical interface, and a Web GUI for\n" +"remote access. The @command{amulecmd} command allows you to control aMule\n" +"remotely." +msgstr "" + +#: gnu/packages/networking.scm:1927 +msgid "Framework for proximity-based peer-to-peer applications" +msgstr "" + +#: gnu/packages/networking.scm:1928 +msgid "" +"Zyre provides reliable group messaging over local area\n" +"networks using zeromq. It has these key characteristics:\n" +"\n" +"@itemize\n" +"@item Zyre needs no administration or configuration.\n" +"@item Peers may join and leave the network at any time.\n" +"@item Peers talk to each other without any central brokers or servers.\n" +"@item Peers can talk directly to each other.\n" +"@item Peers can join groups, and then talk to groups.\n" +"@item Zyre is reliable, and loses no messages even when the network is heavily loaded.\n" +"@item Zyre is fast and has low latency, requiring no consensus protocols.\n" +"@item Zyre is designed for WiFi networks, yet also works well on Ethernet networks.\n" +"@end itemize" +msgstr "" + +#: gnu/packages/networking.scm:1968 +msgid "CAN utilities" +msgstr "" + +#: gnu/packages/networking.scm:1969 +msgid "" +"This package provides CAN utilities in the following areas:\n" +"\n" +"@itemize\n" +"@item Basic tools to display, record, generate and replay CAN traffic\n" +"@item CAN access via IP sockets\n" +"@item CAN in-kernel gateway configuration\n" +"@item CAN bus measurement and testing\n" +"@item ISO-TP (ISO15765-2:2016 - this means messages with a body larger than\n" +"eight bytes) tools\n" +"@item Log file converters\n" +"@item Serial Line Discipline configuration for slcan driver\n" +"@end itemize" +msgstr "" + +#: gnu/packages/networking.scm:2006 +msgid "C++ library for ASynchronous network I/O" +msgstr "" + +#: gnu/packages/networking.scm:2007 +msgid "" +"Asio is a cross-platform C++ library for network and\n" +"low-level I/O programming that provides developers with a consistent\n" +"asynchronous model using a modern C++ approach." +msgstr "" + +#: gnu/packages/networking.scm:2031 +msgid "Fast tunnel proxy that helps you bypass firewalls" +msgstr "" + +#: gnu/packages/networking.scm:2033 +msgid "" +"This package is a fast tunnel proxy that helps you bypass firewalls.\n" +"\n" +"Features:\n" +"@itemize\n" +"@item TCP & UDP support\n" +"@item User management API\n" +"@item TCP Fast Open\n" +"@item Workers and graceful restart\n" +"@item Destination IP blacklist\n" +"@end itemize" +msgstr "" + +#: gnu/packages/networking.scm:2111 +msgid "Simple Network Management Protocol library and tools" +msgstr "" + +#: gnu/packages/networking.scm:2112 +msgid "" +"The @dfn{Simple Network Management Protocol} (SNMP) is a\n" +"widely used protocol for monitoring the health and welfare of network\n" +"equipment (e.g. routers), computer equipment and even devices like UPSs.\n" +"Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and\n" +"SNMP v3 using both IPv4 and IPv6." +msgstr "" + +#: gnu/packages/networking.scm:2153 +msgid "Bridge for UDP tunnels, Ethernet, TAP and VMnet interfaces" +msgstr "" + +#: gnu/packages/networking.scm:2154 +msgid "" +"uBridge is a simple program to create user-land bridges\n" +"between various technologies. Currently, bridging between UDP tunnels,\n" +"Ethernet and TAP interfaces is supported. Packet capture is also supported." +msgstr "" + +#: gnu/packages/networking.scm:2200 +msgid "Capture wlan traffic to hashcat and John the Ripper" +msgstr "" + +#: gnu/packages/networking.scm:2202 +msgid "" +"This package contains a small set of tools to capture and convert\n" +"packets from wireless devices for use with hashcat or John the Ripper." +msgstr "" + +#: gnu/packages/networking.scm:2229 +msgid "Small tool to capture packets from wlan devices" +msgstr "" + +#: gnu/packages/networking.scm:2231 +msgid "" +"Small tool to capture packets from WLAN devices. After capturing,\n" +"upload the \"uncleaned\" cap to @url{https://wpa-sec.stanev.org/?submit} to\n" +"see if the access point or the client is vulnerable to a dictionary attack.\n" +"Convert the cap file to hccapx format and/or to WPA-PMKID-PBKDF2\n" +"hashline (16800) with @command{hcxpcaptool} from the @code{hcxtools} package\n" +"and check if the WLAN key or the master key was transmitted unencrypted." +msgstr "" + +#: gnu/packages/networking.scm:2258 +msgid "SOCKS server and client" +msgstr "" + +#: gnu/packages/networking.scm:2259 +msgid "" +"Dante is a SOCKS client and server implementation. It can\n" +"be installed on a machine with access to an external TCP/IP network and will\n" +"allow all other machines, without direct access to that network, to be relayed\n" +"through the machine the Dante server is running on. The external network will\n" +"never see any machines other than the one Dante is running on." +msgstr "" + +#: gnu/packages/pdf.scm:125 msgid "PDF rendering library" msgstr "PDF-optegningsbibliotek" -#: gnu/packages/pdf.scm:123 +#: gnu/packages/pdf.scm:127 msgid "Poppler is a PDF rendering library based on the xpdf-3.0 code base." msgstr "Poppler er et PDF-optegningsbibliotek baseret på xpdf-3.0-kodebasen." -#: gnu/packages/pdf.scm:132 +#: gnu/packages/pdf.scm:160 +msgid "Poppler encoding files for rendering of CJK and Cyrillic text" +msgstr "" + +#: gnu/packages/pdf.scm:161 +msgid "" +"This package provides optional encoding files for Poppler.\n" +"When present, Poppler is able to correctly render CJK and Cyrillic text." +msgstr "" + +#: gnu/packages/pdf.scm:174 msgid "Qt4 frontend for the Poppler PDF rendering library" msgstr "Qt4-brugeflade for Poppler PDF-optegningsbiblioteket" -#: gnu/packages/pdf.scm:139 +#: gnu/packages/pdf.scm:181 msgid "Qt5 frontend for the Poppler PDF rendering library" msgstr "Qt5-brugeflade for Poppler PDF-optegningsbiblioteket" -#: gnu/packages/pdf.scm:172 -msgid "Python bindings for Poppler-Qt4" -msgstr "Pythonbindinger for Poppler-Qt4" - -#: gnu/packages/pdf.scm:174 -msgid "" -"This package provides Python bindings for the Qt4 interface of the\n" -"Poppler PDF rendering library." -msgstr "" - -#: gnu/packages/pdf.scm:219 +#: gnu/packages/pdf.scm:224 msgid "Python bindings for Poppler-Qt5" msgstr "Pythonbindinger for Poppler-Qt5" -#: gnu/packages/pdf.scm:221 +#: gnu/packages/pdf.scm:226 msgid "" "This package provides Python bindings for the Qt5 interface of the\n" "Poppler PDF rendering library." @@ -10432,59 +11362,59 @@ msgstr "" "Denne pakke tilbyder Pythonbindinger til Qt5-grænsefladen for\n" "Poppler PDF-optegningsbiblioteket." -#: gnu/packages/pdf.scm:258 +#: gnu/packages/pdf.scm:260 msgid "Library for generating PDF files" msgstr "Bibliotek til at oprette PDF-filer" -#: gnu/packages/pdf.scm:260 +#: gnu/packages/pdf.scm:262 msgid "" "libHaru is a library for generating PDF files. libHaru does not support\n" "reading and editing of existing PDF files." msgstr "" -#: gnu/packages/pdf.scm:307 +#: gnu/packages/pdf.scm:309 msgid "Viewer for PDF files based on the Motif toolkit" msgstr "" -#: gnu/packages/pdf.scm:309 +#: gnu/packages/pdf.scm:311 msgid "Xpdf is a viewer for Portable Document Format (PDF) files." msgstr "Xpdf er en fremviser for Portable Document Format-filer (PDF)." -#: gnu/packages/pdf.scm:337 +#: gnu/packages/pdf.scm:345 msgid "Comic book support for zathura (libarchive backend)" msgstr "Understøttelse af tegneserier i zathura (libarchive-motor)" -#: gnu/packages/pdf.scm:338 +#: gnu/packages/pdf.scm:346 msgid "" "The zathura-cb plugin adds comic book support to zathura\n" "using libarchive." msgstr "" -#: gnu/packages/pdf.scm:366 +#: gnu/packages/pdf.scm:380 msgid "PS support for zathura (libspectre backend)" msgstr "" -#: gnu/packages/pdf.scm:367 +#: gnu/packages/pdf.scm:381 msgid "" "The zathura-ps plugin adds PS support to zathura\n" "using libspectre." msgstr "" -#: gnu/packages/pdf.scm:396 +#: gnu/packages/pdf.scm:416 msgid "DjVu support for zathura (DjVuLibre backend)" msgstr "" -#: gnu/packages/pdf.scm:397 +#: gnu/packages/pdf.scm:417 msgid "" "The zathura-djvu plugin adds DjVu support to zathura\n" "using the DjVuLibre library." msgstr "" -#: gnu/packages/pdf.scm:429 +#: gnu/packages/pdf.scm:448 msgid "PDF support for zathura (mupdf backend)" msgstr "PDF-understøttelse for zathura (mupdf-motor)" -#: gnu/packages/pdf.scm:430 +#: gnu/packages/pdf.scm:449 msgid "" "The zathura-pdf-mupdf plugin adds PDF support to zathura\n" "by using the @code{mupdf} rendering library." @@ -10492,32 +11422,32 @@ msgstr "" "Udvidelsesmodulet zathura-pdf-mupdf tilføjer PDF-understøttelse\n" "til zathura ved at brug optegningsbiblioteket @code{mupdf}." -#: gnu/packages/pdf.scm:459 +#: gnu/packages/pdf.scm:484 msgid "PDF support for zathura (poppler backend)" msgstr "PDF-understøttelse for zathura (poppler-motor)" -#: gnu/packages/pdf.scm:460 +#: gnu/packages/pdf.scm:485 msgid "" "The zathura-pdf-poppler plugin adds PDF support to zathura\n" "by using the poppler rendering engine." msgstr "" -#: gnu/packages/pdf.scm:518 +#: gnu/packages/pdf.scm:540 msgid "Lightweight keyboard-driven PDF viewer" msgstr "" -#: gnu/packages/pdf.scm:519 +#: gnu/packages/pdf.scm:541 msgid "" "Zathura is a customizable document viewer. It provides a\n" "minimalistic interface and an interface that mainly focuses on keyboard\n" "interaction." msgstr "" -#: gnu/packages/pdf.scm:558 +#: gnu/packages/pdf.scm:583 msgid "Tools to work with the PDF file format" msgstr "" -#: gnu/packages/pdf.scm:560 +#: gnu/packages/pdf.scm:585 msgid "" "PoDoFo is a C++ library and set of command-line tools to work with the\n" "PDF file format. It can parse PDF files and load them into memory, and makes\n" @@ -10526,11 +11456,11 @@ msgid "" "extracting content or merging files." msgstr "" -#: gnu/packages/pdf.scm:609 +#: gnu/packages/pdf.scm:640 msgid "Lightweight PDF viewer and toolkit" msgstr "" -#: gnu/packages/pdf.scm:611 +#: gnu/packages/pdf.scm:642 msgid "" "MuPDF is a C library that implements a PDF and XPS parsing and\n" "rendering engine. It is used primarily to render pages into bitmaps,\n" @@ -10542,11 +11472,11 @@ msgid "" "@command{pdfclean}, and examining the file structure @command{pdfshow}." msgstr "" -#: gnu/packages/pdf.scm:663 +#: gnu/packages/pdf.scm:701 msgid "Command-line tools and library for transforming PDF files" msgstr "" -#: gnu/packages/pdf.scm:665 +#: gnu/packages/pdf.scm:703 msgid "" "QPDF is a command-line program that does structural, content-preserving\n" "transformations on PDF files. It could have been called something like\n" @@ -10555,32 +11485,32 @@ msgid "" "program capable of converting PDF into other formats." msgstr "" -#: gnu/packages/pdf.scm:695 +#: gnu/packages/pdf.scm:735 msgid "Notetaking using a stylus" msgstr "" -#: gnu/packages/pdf.scm:697 +#: gnu/packages/pdf.scm:737 msgid "" "Xournal is an application for notetaking, sketching, keeping a journal\n" "using a stylus." msgstr "" -#: gnu/packages/pdf.scm:719 +#: gnu/packages/pdf.scm:759 msgid "Python library for generating PDFs and graphics" msgstr "Pythonbibliotek til at oprette PDF-filer og grafik" -#: gnu/packages/pdf.scm:720 +#: gnu/packages/pdf.scm:760 msgid "" "This is the ReportLab PDF Toolkit. It allows rapid creation\n" "of rich PDF documents, and also creation of charts in a variety of bitmap and\n" "vector formats." msgstr "" -#: gnu/packages/pdf.scm:773 +#: gnu/packages/pdf.scm:813 msgid "PDF presentation tool with visual effects" msgstr "PDF-præsentationsværktøj med visuelle effekter" -#: gnu/packages/pdf.scm:775 +#: gnu/packages/pdf.scm:815 msgid "" "Impressive is a tool to display PDF files that provides visual effects\n" "such as smooth alpha-blended slide transitions. It provides additional tools\n" @@ -10588,31 +11518,31 @@ msgid "" "the PDF pages." msgstr "" -#: gnu/packages/pdf.scm:823 +#: gnu/packages/pdf.scm:863 msgid "Framebuffer and drm-based image viewer" msgstr "Framebuffer og drm-baseret billedfremviser" -#: gnu/packages/pdf.scm:825 +#: gnu/packages/pdf.scm:865 msgid "" "fbida contains a few applications for viewing and editing images on\n" "the framebuffer." msgstr "" -#: gnu/packages/pdf.scm:850 +#: gnu/packages/pdf.scm:890 msgid "PDF to SVG converter" msgstr "PDF- til SVG-konverteringsprogram" -#: gnu/packages/pdf.scm:851 +#: gnu/packages/pdf.scm:891 msgid "" "@command{pdf2svg} is a simple command-line PDF to SVG\n" "converter using the Poppler and Cairo libraries." msgstr "" -#: gnu/packages/pdf.scm:882 gnu/packages/pdf.scm:919 +#: gnu/packages/pdf.scm:922 gnu/packages/pdf.scm:959 msgid "Pure Python PDF toolkit" msgstr "Pure Python PDF-værktøjssæt" -#: gnu/packages/pdf.scm:883 +#: gnu/packages/pdf.scm:923 msgid "" "PyPDF2 is a pure Python PDF library capable of:\n" "\n" @@ -10632,7 +11562,7 @@ msgid "" "manage or manipulate PDFs." msgstr "" -#: gnu/packages/pdf.scm:920 +#: gnu/packages/pdf.scm:960 msgid "" "PyPDF2 is a pure Python PDF toolkit.\n" "\n" @@ -10640,11 +11570,11 @@ msgid "" "python-pypdf2 instead." msgstr "" -#: gnu/packages/pdf.scm:944 +#: gnu/packages/pdf.scm:984 msgid "Scale and tile PDF images/pages to print on multiple pages" msgstr "" -#: gnu/packages/pdf.scm:945 +#: gnu/packages/pdf.scm:985 msgid "" "@command{pdfposter} can be used to create a large poster by\n" "building it from multple pages and/or printing it on large media. It expects\n" @@ -10657,11 +11587,11 @@ msgid "" "PDF. Indeed @command{pdfposter} was inspired by @command{poster}." msgstr "" -#: gnu/packages/pdf.scm:976 +#: gnu/packages/pdf.scm:1016 msgid "Command-line utility to search text in PDF files" msgstr "" -#: gnu/packages/pdf.scm:978 +#: gnu/packages/pdf.scm:1018 msgid "" "Pdfgrep searches in pdf files for strings matching a regular expression.\n" "Support some GNU grep options as file name output, page number output,\n" @@ -10669,6 +11599,20 @@ msgid "" "multiple files." msgstr "" +#: gnu/packages/pdf.scm:1052 +msgid "Presenter console with multi-monitor support for PDF files" +msgstr "" + +#: gnu/packages/pdf.scm:1054 +msgid "" +"pdfpc is a presentation viewer application which uses multi-monitor\n" +"output to provide meta information to the speaker during the presentation. It\n" +"is able to show a normal presentation window on one screen, while showing a\n" +"more sophisticated overview on the other one providing information like a\n" +"picture of the next slide, as well as the left over time till the end of the\n" +"presentation. The input files processed by pdfpc are PDF documents." +msgstr "" + #: gnu/packages/pem.scm:41 msgid "Personal expenses manager" msgstr "" @@ -10682,31 +11626,33 @@ msgid "" "feature." msgstr "" -#: gnu/packages/perl.scm:155 +#: gnu/packages/perl.scm:157 msgid "Implementation of the Perl programming language" msgstr "" -#: gnu/packages/perl.scm:157 +#: gnu/packages/perl.scm:159 msgid "" -"Perl 5 is a highly capable, feature-rich programming language with over\n" -"24 years of development." +"Perl is a general-purpose programming language originally developed for\n" +"text manipulation and now used for a wide range of tasks including system\n" +"administration, web development, network programming, GUI development, and\n" +"more." msgstr "" -#: gnu/packages/perl.scm:209 +#: gnu/packages/perl.scm:215 msgid "Module for merging hierarchies using the C3 algorithm" msgstr "" -#: gnu/packages/perl.scm:210 +#: gnu/packages/perl.scm:216 msgid "" "This module implements the C3 algorithm, which aims to\n" "provide a sane method resolution order under multiple inheritance." msgstr "" -#: gnu/packages/perl.scm:228 +#: gnu/packages/perl.scm:234 msgid "Compute differences between two files or lists" msgstr "" -#: gnu/packages/perl.scm:229 +#: gnu/packages/perl.scm:235 msgid "" "This is a module for computing the difference between two\n" "files, two strings, or any other two lists of things. It uses an intelligent\n" @@ -10715,11 +11661,11 @@ msgid "" "differences." msgstr "" -#: gnu/packages/perl.scm:251 +#: gnu/packages/perl.scm:257 msgid "Use shorter versions of class names" msgstr "" -#: gnu/packages/perl.scm:252 +#: gnu/packages/perl.scm:258 msgid "" "The alias module loads the class you specify and exports\n" "into your namespace a subroutine that returns the class name. You can\n" @@ -10727,11 +11673,11 @@ msgid "" "implicitly." msgstr "" -#: gnu/packages/perl.scm:274 +#: gnu/packages/perl.scm:280 msgid "Transparently use Moose or Mouse modules" msgstr "" -#: gnu/packages/perl.scm:276 +#: gnu/packages/perl.scm:282 msgid "" "This module facilitates using @code{Moose} or @code{Mouse} modules\n" "without changing the code. By default, Mouse will be provided to libraries,\n" @@ -10740,31 +11686,31 @@ msgid "" "variable ANY_MOOSE to be Moose or Mouse." msgstr "" -#: gnu/packages/perl.scm:299 +#: gnu/packages/perl.scm:305 msgid "Configuration files and command line parsing" msgstr "" -#: gnu/packages/perl.scm:300 +#: gnu/packages/perl.scm:306 msgid "" "AppConfig is a bundle of Perl5 modules for reading\n" "configuration files and parsing command line arguments." msgstr "" -#: gnu/packages/perl.scm:320 +#: gnu/packages/perl.scm:326 msgid "Small utils for array manipulation" msgstr "" -#: gnu/packages/perl.scm:321 +#: gnu/packages/perl.scm:327 msgid "" "@code{Array::Utils} is a small pure-perl module containing\n" "list manipulation routines." msgstr "" -#: gnu/packages/perl.scm:340 +#: gnu/packages/perl.scm:346 msgid "Allow C/XS libraries to interrupt perl asynchronously" msgstr "" -#: gnu/packages/perl.scm:342 +#: gnu/packages/perl.scm:348 msgid "" "@code{Async::Interrupt} implements a single feature only of interest\n" "to advanced perl modules, namely asynchronous interruptions (think \"UNIX\n" @@ -10782,11 +11728,11 @@ msgid "" "sometimes even without using a single syscall." msgstr "" -#: gnu/packages/perl.scm:372 +#: gnu/packages/perl.scm:378 msgid "Lexically disable autovivification" msgstr "" -#: gnu/packages/perl.scm:373 +#: gnu/packages/perl.scm:379 msgid "" "When an undefined variable is dereferenced, it gets silently\n" "upgraded to an array or hash reference (depending of the type of the\n" @@ -10800,19 +11746,19 @@ msgid "" "error when it would have happened." msgstr "" -#: gnu/packages/perl.scm:406 +#: gnu/packages/perl.scm:412 msgid "Disables bareword filehandles" msgstr "" -#: gnu/packages/perl.scm:407 +#: gnu/packages/perl.scm:413 msgid "This module disables bareword filehandles." msgstr "" -#: gnu/packages/perl.scm:424 gnu/packages/perl.scm:6805 +#: gnu/packages/perl.scm:430 gnu/packages/perl.scm:6861 msgid "Establish an ISA relationship with base classes at compile time" msgstr "" -#: gnu/packages/perl.scm:425 +#: gnu/packages/perl.scm:431 msgid "" "Allows you to both load one or more modules, while setting\n" "up inheritance from those modules at the same time. Unless you are using the\n" @@ -10820,11 +11766,11 @@ msgid "" "parent." msgstr "" -#: gnu/packages/perl.scm:445 +#: gnu/packages/perl.scm:451 msgid "Open a browser in a given URL" msgstr "" -#: gnu/packages/perl.scm:446 +#: gnu/packages/perl.scm:452 msgid "" "The functions exported by this module allow you to open URLs\n" "in the user's browser. A set of known commands per OS-name is tested for\n" @@ -10832,29 +11778,29 @@ msgid "" "all known commands are checked." msgstr "" -#: gnu/packages/perl.scm:471 +#: gnu/packages/perl.scm:477 msgid "Execute code after a scope finished compilation" msgstr "" -#: gnu/packages/perl.scm:472 +#: gnu/packages/perl.scm:478 msgid "" "This module allows you to execute code when perl finished\n" "compiling the surrounding scope." msgstr "" -#: gnu/packages/perl.scm:493 +#: gnu/packages/perl.scm:499 msgid "Wrap OP check callbacks" msgstr "" -#: gnu/packages/perl.scm:494 +#: gnu/packages/perl.scm:500 msgid "This module allows you to wrap OP check callbacks." msgstr "" -#: gnu/packages/perl.scm:511 +#: gnu/packages/perl.scm:517 msgid "Lists of reserved barewords and symbol names" msgstr "" -#: gnu/packages/perl.scm:512 +#: gnu/packages/perl.scm:518 msgid "" "@code{B::Keywords} supplies several arrays of exportable\n" "keywords: @code{@@Scalars, @@Arrays, @@Hashes, @@Filehandles, @@Symbols,\n" @@ -10862,11 +11808,11 @@ msgid "" "@@ExporterSymbols}." msgstr "" -#: gnu/packages/perl.scm:535 +#: gnu/packages/perl.scm:541 msgid "Benchmarking with statistical confidence" msgstr "" -#: gnu/packages/perl.scm:537 +#: gnu/packages/perl.scm:543 msgid "" "The Benchmark::Timer class allows you to time portions of code\n" "conveniently, as well as benchmark code by allowing timings of repeated\n" @@ -10875,11 +11821,11 @@ msgid "" "but don't want to go all out and profile your code." msgstr "" -#: gnu/packages/perl.scm:562 +#: gnu/packages/perl.scm:567 msgid "Bit vector library" msgstr "" -#: gnu/packages/perl.scm:563 +#: gnu/packages/perl.scm:568 msgid "" "Bit::Vector is an efficient C library which allows you to\n" "handle bit vectors, sets (of integers), \"big integer arithmetic\" and boolean\n" @@ -10889,62 +11835,62 @@ msgid "" "library can nevertheless be used stand-alone, without Perl." msgstr "" -#: gnu/packages/perl.scm:585 +#: gnu/packages/perl.scm:590 msgid "Boolean support for Perl" msgstr "" -#: gnu/packages/perl.scm:586 +#: gnu/packages/perl.scm:591 msgid "" "This module provides basic Boolean support, by defining two\n" "special objects: true and false." msgstr "" -#: gnu/packages/perl.scm:604 +#: gnu/packages/perl.scm:609 msgid "Data files for Business::ISBN" msgstr "" -#: gnu/packages/perl.scm:605 +#: gnu/packages/perl.scm:610 msgid "" "This package provides a data pack for @code{Business::ISBN}.\n" "These data are generated from the RangeMessage.xml file provided by the ISBN\n" "Agency." msgstr "" -#: gnu/packages/perl.scm:627 +#: gnu/packages/perl.scm:632 msgid "Work with International Standard Book Numbers" msgstr "" -#: gnu/packages/perl.scm:628 +#: gnu/packages/perl.scm:633 msgid "" "This modules provides tools to deal with International\n" "Standard Book Numbers, including ISBN-10 and ISBN-13." msgstr "" -#: gnu/packages/perl.scm:646 +#: gnu/packages/perl.scm:651 msgid "Work with International Standard Serial Numbers" msgstr "" -#: gnu/packages/perl.scm:647 +#: gnu/packages/perl.scm:652 msgid "" "This modules provides tools to deal with International\n" "Standard Serial Numbers." msgstr "" -#: gnu/packages/perl.scm:667 +#: gnu/packages/perl.scm:672 msgid "Work with International Standard Music Numbers" msgstr "" -#: gnu/packages/perl.scm:668 +#: gnu/packages/perl.scm:673 msgid "" "This modules provides tools to deal with International\n" "Standard Music Numbers." msgstr "" -#: gnu/packages/perl.scm:689 +#: gnu/packages/perl.scm:694 msgid "Cache interface for Perl" msgstr "" -#: gnu/packages/perl.scm:690 +#: gnu/packages/perl.scm:695 msgid "" "The Cache modules are designed to assist a developer in\n" "persisting data for a specified period of time. Often these modules are used\n" @@ -10955,11 +11901,11 @@ msgid "" "easy to use abstraction of the file system or shared memory." msgstr "" -#: gnu/packages/perl.scm:713 +#: gnu/packages/perl.scm:718 msgid "Shared memory interprocess cache via mmap" msgstr "" -#: gnu/packages/perl.scm:714 +#: gnu/packages/perl.scm:719 msgid "" "A shared memory cache through an mmap'ed file. It's core is\n" "written in C for performance. It uses fcntl locking to ensure multiple\n" @@ -10967,11 +11913,11 @@ msgid "" "algorithm to keep the most used entries in the cache." msgstr "" -#: gnu/packages/perl.scm:735 +#: gnu/packages/perl.scm:740 msgid "Capture STDOUT and STDERR from Perl, XS or external programs" msgstr "" -#: gnu/packages/perl.scm:737 +#: gnu/packages/perl.scm:742 msgid "" "Capture::Tiny provides a simple, portable way to capture almost anything\n" "sent to STDOUT or STDERR, regardless of whether it comes from Perl, from XS\n" @@ -10979,21 +11925,21 @@ msgid "" "is captured while being passed through to the original file handles." msgstr "" -#: gnu/packages/perl.scm:756 +#: gnu/packages/perl.scm:761 msgid "Check compatibility with the installed perl version" msgstr "" -#: gnu/packages/perl.scm:758 +#: gnu/packages/perl.scm:763 msgid "" "This module is used by Schmorp's modules during configuration stage\n" "to test the installed perl for compatibility with his modules." msgstr "" -#: gnu/packages/perl.scm:776 +#: gnu/packages/perl.scm:781 msgid "Alternative warn and die for modules" msgstr "" -#: gnu/packages/perl.scm:777 +#: gnu/packages/perl.scm:782 msgid "" "The @code{Carp} routines are useful in your own modules\n" "because they act like @code{die()} or @code{warn()}, but with a message\n" @@ -11005,42 +11951,42 @@ msgid "" "but it is a good educated guess." msgstr "" -#: gnu/packages/perl.scm:803 +#: gnu/packages/perl.scm:808 msgid "Warns and dies noisily with stack backtraces/" msgstr "" -#: gnu/packages/perl.scm:804 +#: gnu/packages/perl.scm:809 msgid "" "This module is meant as a debugging aid. It can be used to\n" "make a script complain loudly with stack backtraces when @code{warn()}-ing or\n" "@code{die()}ing." msgstr "" -#: gnu/packages/perl.scm:823 +#: gnu/packages/perl.scm:828 msgid "Executable comments for Perl" msgstr "" -#: gnu/packages/perl.scm:824 +#: gnu/packages/perl.scm:829 msgid "" "Carp::Assert is intended for a purpose like the ANSI C\n" "library assert.h." msgstr "" -#: gnu/packages/perl.scm:846 +#: gnu/packages/perl.scm:851 msgid "Convenience wrappers around Carp::Assert" msgstr "" -#: gnu/packages/perl.scm:847 +#: gnu/packages/perl.scm:852 msgid "" "Carp::Assert::More is a set of handy assertion functions for\n" "Perl." msgstr "" -#: gnu/packages/perl.scm:867 +#: gnu/packages/perl.scm:872 msgid "Report errors from a \"clan\" of modules" msgstr "" -#: gnu/packages/perl.scm:868 +#: gnu/packages/perl.scm:873 msgid "" "This module allows errors from a clan (or family) of modules\n" "to appear to originate from the caller of the clan. This is necessary in\n" @@ -11048,29 +11994,29 @@ msgid "" "the Carp.pm module doesn't help." msgstr "" -#: gnu/packages/perl.scm:888 +#: gnu/packages/perl.scm:893 msgid "Read the CDDB entry for an audio CD in your drive" msgstr "" -#: gnu/packages/perl.scm:889 +#: gnu/packages/perl.scm:894 msgid "This module can retrieve information from the CDDB." msgstr "" -#: gnu/packages/perl.scm:911 +#: gnu/packages/perl.scm:916 msgid "Automated accessor generation" msgstr "" -#: gnu/packages/perl.scm:912 +#: gnu/packages/perl.scm:917 msgid "" "This module automagically generates accessors/mutators for\n" "your class." msgstr "" -#: gnu/packages/perl.scm:934 +#: gnu/packages/perl.scm:939 msgid "Faster, but less expandable, chained accessors" msgstr "" -#: gnu/packages/perl.scm:935 +#: gnu/packages/perl.scm:940 msgid "" "A chained accessor is one that always returns the object\n" "when called with parameters (to set), and the value of the field when called\n" @@ -11078,52 +12024,52 @@ msgid "" "the same mk_accessors interface." msgstr "" -#: gnu/packages/perl.scm:962 +#: gnu/packages/perl.scm:967 msgid "Build groups of accessors" msgstr "" -#: gnu/packages/perl.scm:963 +#: gnu/packages/perl.scm:968 msgid "" "This class lets you build groups of accessors that will call\n" "different getters and setters." msgstr "" -#: gnu/packages/perl.scm:983 +#: gnu/packages/perl.scm:988 msgid "Pragma to use the C3 method resolution order algorithm" msgstr "" -#: gnu/packages/perl.scm:984 +#: gnu/packages/perl.scm:989 msgid "" "This is pragma to change Perl 5's standard method resolution\n" "order from depth-first left-to-right (a.k.a - pre-order) to the more\n" "sophisticated C3 method resolution order." msgstr "" -#: gnu/packages/perl.scm:1008 +#: gnu/packages/perl.scm:1013 msgid "Drop-in replacement for NEXT" msgstr "" -#: gnu/packages/perl.scm:1009 +#: gnu/packages/perl.scm:1014 msgid "" "This module is intended as a drop-in replacement for NEXT,\n" "supporting the same interface, but using Class::C3 to do the hard work." msgstr "" -#: gnu/packages/perl.scm:1034 +#: gnu/packages/perl.scm:1039 msgid "Load mix-ins or components to your C3-based class" msgstr "" -#: gnu/packages/perl.scm:1035 +#: gnu/packages/perl.scm:1040 msgid "" "This module will inject base classes to your module using\n" "the Class::C3 method resolution order." msgstr "" -#: gnu/packages/perl.scm:1053 +#: gnu/packages/perl.scm:1058 msgid "Inheritable, overridable class data" msgstr "" -#: gnu/packages/perl.scm:1054 +#: gnu/packages/perl.scm:1059 msgid "" "Class::Data::Inheritable is for creating accessor/mutators\n" "to class data. That is, if you want to store something about your class as a\n" @@ -11131,21 +12077,21 @@ msgid "" "subclasses and can be overridden." msgstr "" -#: gnu/packages/perl.scm:1075 +#: gnu/packages/perl.scm:1080 msgid "Class for easy date and time manipulation" msgstr "" -#: gnu/packages/perl.scm:1076 +#: gnu/packages/perl.scm:1081 msgid "" "This module provides a general-purpose date and datetime\n" "type for perl." msgstr "" -#: gnu/packages/perl.scm:1093 +#: gnu/packages/perl.scm:1098 msgid "Base class for error handling" msgstr "" -#: gnu/packages/perl.scm:1095 +#: gnu/packages/perl.scm:1100 msgid "" "@code{Class::ErrorHandler} provides an error-handling mechanism that is generic\n" "enough to be used as the base class for a variety of OO classes. Subclasses inherit\n" @@ -11153,60 +12099,60 @@ msgid "" "to the calling program." msgstr "" -#: gnu/packages/perl.scm:1116 +#: gnu/packages/perl.scm:1121 msgid "Utility methods for factory classes" msgstr "" -#: gnu/packages/perl.scm:1117 +#: gnu/packages/perl.scm:1122 msgid "This module exports methods useful for factory classes." msgstr "" -#: gnu/packages/perl.scm:1134 +#: gnu/packages/perl.scm:1139 msgid "Get information about a class and its structure" msgstr "" -#: gnu/packages/perl.scm:1135 +#: gnu/packages/perl.scm:1140 msgid "" "Class::Inspector allows you to get information about a\n" "loaded class." msgstr "" -#: gnu/packages/perl.scm:1163 +#: gnu/packages/perl.scm:1169 msgid "Working (require \"Class::Name\") and more" msgstr "" -#: gnu/packages/perl.scm:1164 +#: gnu/packages/perl.scm:1170 msgid "" "\"require EXPR\" only accepts Class/Name.pm style module\n" "names, not Class::Name. For that, this module provides \"load_class\n" "'Class::Name'\"." msgstr "" -#: gnu/packages/perl.scm:1187 +#: gnu/packages/perl.scm:1194 msgid "XS implementation of parts of Class::Load" msgstr "" -#: gnu/packages/perl.scm:1188 +#: gnu/packages/perl.scm:1195 msgid "" "This module provides an XS implementation for portions of\n" "Class::Load." msgstr "" -#: gnu/packages/perl.scm:1207 +#: gnu/packages/perl.scm:1214 msgid "Create generic methods for OO Perl" msgstr "" -#: gnu/packages/perl.scm:1208 +#: gnu/packages/perl.scm:1215 msgid "" "This module solves the problem of having to continually\n" "write accessor methods for your objects that perform standard tasks." msgstr "" -#: gnu/packages/perl.scm:1229 +#: gnu/packages/perl.scm:1236 msgid "Moose-like method modifiers" msgstr "" -#: gnu/packages/perl.scm:1230 +#: gnu/packages/perl.scm:1237 msgid "" "Class::Method::Modifiers provides three modifiers: 'before',\n" "'around', and 'after'. 'before' and 'after' are run just before and after the\n" @@ -11215,42 +12161,42 @@ msgid "" "original method." msgstr "" -#: gnu/packages/perl.scm:1251 +#: gnu/packages/perl.scm:1258 msgid "Implementation of a singleton class for Perl" msgstr "" -#: gnu/packages/perl.scm:1252 +#: gnu/packages/perl.scm:1259 msgid "" "This module implements a Singleton class from which other\n" "classes can be derived. By itself, the Class::Singleton module does very\n" "little other than manage the instantiation of a single object." msgstr "" -#: gnu/packages/perl.scm:1271 +#: gnu/packages/perl.scm:1278 msgid "Minimalist class construction" msgstr "" -#: gnu/packages/perl.scm:1272 +#: gnu/packages/perl.scm:1279 msgid "" "This module offers a minimalist class construction kit. It\n" "uses no non-core modules for any recent Perl." msgstr "" -#: gnu/packages/perl.scm:1292 +#: gnu/packages/perl.scm:1299 msgid "Unload a class" msgstr "" -#: gnu/packages/perl.scm:1293 +#: gnu/packages/perl.scm:1300 msgid "" "Class:Unload unloads a given class by clearing out its\n" "symbol table and removing it from %INC." msgstr "" -#: gnu/packages/perl.scm:1311 +#: gnu/packages/perl.scm:1318 msgid "Generate fast XS accessors without runtime compilation" msgstr "" -#: gnu/packages/perl.scm:1312 +#: gnu/packages/perl.scm:1319 msgid "" "Class::XSAccessor implements fast read, write, and\n" "read/write accessors in XS. Additionally, it can provide predicates such as\n" @@ -11260,18 +12206,18 @@ msgid "" "arrays for their internal representation." msgstr "" -#: gnu/packages/perl.scm:1332 gnu/packages/perl.scm:1355 +#: gnu/packages/perl.scm:1339 gnu/packages/perl.scm:1361 msgid "Recursively copy Perl datatypes" msgstr "" -#: gnu/packages/perl.scm:1334 +#: gnu/packages/perl.scm:1341 msgid "" "This module provides a clone() method which makes recursive copies of\n" "nested hash, array, scalar and reference types, including tied variables and\n" "objects." msgstr "" -#: gnu/packages/perl.scm:1356 +#: gnu/packages/perl.scm:1362 msgid "" "This module provides a general-purpose @code{clone} function\n" "to make deep copies of Perl data structures. It calls itself recursively to\n" @@ -11279,42 +12225,42 @@ msgid "" "and objects." msgstr "" -#: gnu/packages/perl.scm:1376 +#: gnu/packages/perl.scm:1382 msgid "Sane defaults for Perl programs" msgstr "" -#: gnu/packages/perl.scm:1377 +#: gnu/packages/perl.scm:1383 msgid "" "This module implements some sane defaults for Perl programs,\n" "as defined by two typical specimens of Perl coders." msgstr "" -#: gnu/packages/perl.scm:1397 +#: gnu/packages/perl.scm:1403 msgid "Load configuration from different file formats" msgstr "" -#: gnu/packages/perl.scm:1398 +#: gnu/packages/perl.scm:1404 msgid "" "Config::Any provides a facility for Perl applications and\n" "libraries to load configuration data from multiple different file formats. It\n" "supports XML, YAML, JSON, Apache-style configuration, and Perl code." msgstr "" -#: gnu/packages/perl.scm:1419 +#: gnu/packages/perl.scm:1425 msgid "Module to implement some AutoConf macros in Perl" msgstr "" -#: gnu/packages/perl.scm:1420 +#: gnu/packages/perl.scm:1426 msgid "" "Config::AutoConf is intended to provide the same\n" "opportunities to Perl developers as GNU Autoconf does for Shell developers." msgstr "" -#: gnu/packages/perl.scm:1438 +#: gnu/packages/perl.scm:1444 msgid "Generic Config Module" msgstr "" -#: gnu/packages/perl.scm:1439 +#: gnu/packages/perl.scm:1445 msgid "" "This module opens a config file and parses its contents for\n" "you. The format of config files supported by Config::General is inspired by\n" @@ -11325,32 +12271,32 @@ msgid "" "options." msgstr "" -#: gnu/packages/perl.scm:1466 +#: gnu/packages/perl.scm:1472 msgid "Simple .ini-file format reader and writer" msgstr "" -#: gnu/packages/perl.scm:1467 +#: gnu/packages/perl.scm:1473 msgid "" "@code{Config::INI} is a module that facilates the reading\n" "and writing of @code{.ini}-style configuration files." msgstr "" -#: gnu/packages/perl.scm:1488 +#: gnu/packages/perl.scm:1494 msgid "Preserve context during subroutine call" msgstr "" -#: gnu/packages/perl.scm:1489 +#: gnu/packages/perl.scm:1495 msgid "" "This module runs code after a subroutine call, preserving\n" "the context the subroutine would have seen if it were the last statement in\n" "the caller." msgstr "" -#: gnu/packages/perl.scm:1514 +#: gnu/packages/perl.scm:1520 msgid "Extract data from Macintosh BinHex files" msgstr "" -#: gnu/packages/perl.scm:1516 +#: gnu/packages/perl.scm:1522 msgid "" "BinHex is a format for transporting files safely through electronic\n" "mail, as short-lined, 7-bit, semi-compressed data streams. Ths module\n" @@ -11358,31 +12304,41 @@ msgid "" "data." msgstr "" -#: gnu/packages/perl.scm:1538 +#: gnu/packages/perl.scm:1543 +msgid "Read and write @file{Changes} files" +msgstr "" + +#: gnu/packages/perl.scm:1545 +msgid "" +"@code{CPAN::Changes} helps users programmatically read and write\n" +"@file{Changes} files that conform to a common specification." +msgstr "" + +#: gnu/packages/perl.scm:1565 msgid "Verify requirements in a CPAN::Meta object" msgstr "" -#: gnu/packages/perl.scm:1539 +#: gnu/packages/perl.scm:1566 msgid "" "This module verifies if requirements described in a\n" "CPAN::Meta object are present." msgstr "" -#: gnu/packages/perl.scm:1559 +#: gnu/packages/perl.scm:1586 msgid "JSON::XS for Cpanel" msgstr "" -#: gnu/packages/perl.scm:1560 gnu/packages/perl.scm:4463 +#: gnu/packages/perl.scm:1587 gnu/packages/perl.scm:4486 msgid "" "This module converts Perl data structures to JSON and vice\n" "versa." msgstr "" -#: gnu/packages/perl.scm:1578 +#: gnu/packages/perl.scm:1605 msgid "Random password generator" msgstr "" -#: gnu/packages/perl.scm:1579 +#: gnu/packages/perl.scm:1606 msgid "" "Crypt::RandPasswd provides three functions that can be used\n" "to generate random passwords, constructed from words, letters, or characters.\n" @@ -11393,40 +12349,40 @@ msgid "" "Password Generator\"." msgstr "" -#: gnu/packages/perl.scm:1604 +#: gnu/packages/perl.scm:1631 msgid "Perl implementation of the RC4 encryption algorithm" msgstr "Perlimplementering af RC4-krypteringsalgoritmen" -#: gnu/packages/perl.scm:1605 +#: gnu/packages/perl.scm:1632 msgid "A pure Perl implementation of the RC4 algorithm." msgstr "En pure Perl-implementering af RC4-algoritmen." -#: gnu/packages/perl.scm:1624 +#: gnu/packages/perl.scm:1651 msgid "Temporarily change working directory" msgstr "Skift midlertidigt arbejdsmappe" -#: gnu/packages/perl.scm:1626 +#: gnu/packages/perl.scm:1653 msgid "" "@code{Cwd::Guard} changes the current directory using a limited scope.\n" "It returns to the previous working directory when the object is destroyed." msgstr "" -#: gnu/packages/perl.scm:1664 +#: gnu/packages/perl.scm:1691 msgid "Library for genomic analysis" msgstr "" -#: gnu/packages/perl.scm:1665 +#: gnu/packages/perl.scm:1692 msgid "" "Chaolin Zhang's Perl Library (czplib) contains assorted\n" "functions and data structures for processing and analysing genomic and\n" "bioinformatics data." msgstr "" -#: gnu/packages/perl.scm:1694 gnu/packages/perl.scm:1860 +#: gnu/packages/perl.scm:1721 gnu/packages/perl.scm:1887 msgid "Base classes wrapping fundamental Perl data types" msgstr "" -#: gnu/packages/perl.scm:1695 +#: gnu/packages/perl.scm:1722 msgid "" "Collection of classes that wrap fundamental data types that\n" "exist in Perl. These classes and methods as they exist today are an attempt\n" @@ -11435,61 +12391,61 @@ msgid "" "input." msgstr "" -#: gnu/packages/perl.scm:1718 +#: gnu/packages/perl.scm:1745 msgid "Compare Perl data structures" msgstr "Sammenlign Perldatastrukturer" -#: gnu/packages/perl.scm:1719 +#: gnu/packages/perl.scm:1746 msgid "" "This module compares arbitrary data structures to see if\n" "they are copies of each other." msgstr "" -#: gnu/packages/perl.scm:1737 +#: gnu/packages/perl.scm:1764 msgid "Perl extension for generating unique identifiers" msgstr "" -#: gnu/packages/perl.scm:1738 +#: gnu/packages/perl.scm:1765 msgid "" "@code{Data::Uniqid} provides three simple routines for\n" "generating unique ids. These ids are coded with a Base62 systen to make them\n" "short and handy (e.g. to use it as part of a URL)." msgstr "" -#: gnu/packages/perl.scm:1757 +#: gnu/packages/perl.scm:1784 msgid "Pretty printing of data structures" msgstr "" -#: gnu/packages/perl.scm:1758 +#: gnu/packages/perl.scm:1785 msgid "" "This module provide functions that takes a list of values as\n" "their argument and produces a string as its result. The string contains Perl\n" "code that, when \"eval\"ed, produces a deep copy of the original arguments." msgstr "" -#: gnu/packages/perl.scm:1777 +#: gnu/packages/perl.scm:1804 msgid "Concise data dumper" msgstr "" -#: gnu/packages/perl.scm:1778 +#: gnu/packages/perl.scm:1805 msgid "" "Data::Dumper::Concise provides a dumper with Less\n" "indentation and newlines plus sub deparsing." msgstr "" -#: gnu/packages/perl.scm:1800 +#: gnu/packages/perl.scm:1827 msgid "Parse and validate simple name/value option pairs" msgstr "" -#: gnu/packages/perl.scm:1802 +#: gnu/packages/perl.scm:1829 msgid "Data::OptList provides a simple syntax for name/value option pairs." msgstr "" -#: gnu/packages/perl.scm:1824 +#: gnu/packages/perl.scm:1851 msgid "Help when paging through sets of results" msgstr "" -#: gnu/packages/perl.scm:1825 +#: gnu/packages/perl.scm:1852 msgid "" "When searching through large amounts of data, it is often\n" "the case that a result set is returned that is larger than we want to display\n" @@ -11497,7 +12453,7 @@ msgid "" "The maths behind this is unfortunately fiddly, hence this module." msgstr "" -#: gnu/packages/perl.scm:1862 +#: gnu/packages/perl.scm:1889 msgid "" "@code{Data::Perl} is a container class for the following classes:\n" "@itemize\n" @@ -11511,11 +12467,11 @@ msgid "" "@end itemize" msgstr "" -#: gnu/packages/perl.scm:1893 +#: gnu/packages/perl.scm:1920 msgid "Colored pretty-print of Perl data structures and objects" msgstr "Farvelagte forskønnede udskrivning af Perldatastrukturer og -objekter" -#: gnu/packages/perl.scm:1894 +#: gnu/packages/perl.scm:1921 msgid "" "Display Perl variables and objects on screen, properly\n" "formatted (to be inspected by a human)." @@ -11523,11 +12479,11 @@ msgstr "" "Vis Perlvariabler og -objekter på skærmen, korrekt\n" "formateret (til inspektion af et menneske)." -#: gnu/packages/perl.scm:1917 +#: gnu/packages/perl.scm:1944 msgid "Conditionally split data into records" msgstr "" -#: gnu/packages/perl.scm:1918 +#: gnu/packages/perl.scm:1945 msgid "" "This Perl module allows you to split data into records by\n" "not only specifying what you wish to split the data on, but also by specifying\n" @@ -11536,21 +12492,21 @@ msgid "" "like split on newlines unless newlines are embedded in quotes." msgstr "" -#: gnu/packages/perl.scm:1946 +#: gnu/packages/perl.scm:1973 msgid "Read multiple hunks of data out of your DATA section" msgstr "" -#: gnu/packages/perl.scm:1947 +#: gnu/packages/perl.scm:1974 msgid "" "This package provides a Perl library to read multiple hunks\n" "of data out of your DATA section." msgstr "" -#: gnu/packages/perl.scm:1967 +#: gnu/packages/perl.scm:1994 msgid "Structured tags datastructures" msgstr "" -#: gnu/packages/perl.scm:1969 +#: gnu/packages/perl.scm:1996 msgid "" "This module is for manipulating data as hierarchical tag/value\n" "pairs (Structured TAGs or Simple Tree AGgregates). These datastructures can\n" @@ -11558,11 +12514,11 @@ msgid "" "Perl." msgstr "" -#: gnu/packages/perl.scm:1996 +#: gnu/packages/perl.scm:2023 msgid "N at a time iteration API" msgstr "" -#: gnu/packages/perl.scm:1997 +#: gnu/packages/perl.scm:2024 msgid "" "This module tries to find middle ground between one at a\n" "time and all at once processing of data sets. The purpose of this module is\n" @@ -11571,21 +12527,21 @@ msgid "" "necessary later on." msgstr "" -#: gnu/packages/perl.scm:2022 +#: gnu/packages/perl.scm:2049 msgid "Dynamic generation of nested combinations of variants" msgstr "" -#: gnu/packages/perl.scm:2023 +#: gnu/packages/perl.scm:2050 msgid "" "Data::Tumbler - Dynamic generation of nested combinations of\n" "variants." msgstr "" -#: gnu/packages/perl.scm:2049 +#: gnu/packages/perl.scm:2076 msgid "Visitor style traversal of Perl data structures" msgstr "" -#: gnu/packages/perl.scm:2050 +#: gnu/packages/perl.scm:2077 msgid "" "This module is a simple visitor implementation for Perl\n" "values. It has a main dispatcher method, visit, which takes a single perl\n" @@ -11595,11 +12551,11 @@ msgid "" "structures, and all ref types (hashes, arrays, scalars, code, globs)." msgstr "" -#: gnu/packages/perl.scm:2075 +#: gnu/packages/perl.scm:2102 msgid "Gregorian calendar date calculations" msgstr "" -#: gnu/packages/perl.scm:2076 +#: gnu/packages/perl.scm:2103 msgid "" "This package consists of a Perl module for date calculations\n" "based on the Gregorian calendar, thereby complying with all relevant norms and\n" @@ -11607,32 +12563,32 @@ msgid "" "applicable)." msgstr "" -#: gnu/packages/perl.scm:2100 +#: gnu/packages/perl.scm:2127 msgid "XS wrapper for Date::Calc" msgstr "" -#: gnu/packages/perl.scm:2101 +#: gnu/packages/perl.scm:2128 msgid "" "Date::Calc::XS is an XS wrapper and C library plug-in for\n" "Date::Calc." msgstr "" -#: gnu/packages/perl.scm:2125 +#: gnu/packages/perl.scm:2152 msgid "Date manipulation routines" msgstr "" -#: gnu/packages/perl.scm:2126 +#: gnu/packages/perl.scm:2153 msgid "" "Date::Manip is a series of modules for common date/time\n" "operations, such as comparing two times, determining a date a given amount of\n" "time from another, or parsing international times." msgstr "" -#: gnu/packages/perl.scm:2145 +#: gnu/packages/perl.scm:2172 msgid "Simple date handling" msgstr "" -#: gnu/packages/perl.scm:2146 +#: gnu/packages/perl.scm:2173 msgid "" "Dates are complex enough without times and timezones. This\n" "module may be used to create simple date objects. It handles validation,\n" @@ -11640,22 +12596,22 @@ msgid "" "hours, minutes, seconds, and time zones." msgstr "" -#: gnu/packages/perl.scm:2178 +#: gnu/packages/perl.scm:2205 msgid "Date and time object for Perl" msgstr "" -#: gnu/packages/perl.scm:2179 +#: gnu/packages/perl.scm:2206 msgid "" "DateTime is a class for the representation of date/time\n" "combinations. It represents the Gregorian calendar, extended backwards in\n" "time before its creation (in 1582)." msgstr "" -#: gnu/packages/perl.scm:2201 +#: gnu/packages/perl.scm:2228 msgid "Dates in the Julian calendar" msgstr "" -#: gnu/packages/perl.scm:2202 +#: gnu/packages/perl.scm:2229 msgid "" "This package is a companion module to @code{DateTime.pm}.\n" "It implements the Julian calendar. It supports everything that\n" @@ -11663,11 +12619,11 @@ msgid "" "precise." msgstr "" -#: gnu/packages/perl.scm:2228 +#: gnu/packages/perl.scm:2255 msgid "DateTime set objects" msgstr "" -#: gnu/packages/perl.scm:2229 +#: gnu/packages/perl.scm:2256 msgid "" "The DateTime::Set module provides a date/time sets\n" "implementation. It allows, for example, the generation of groups of dates,\n" @@ -11675,21 +12631,21 @@ msgid "" "within a time range." msgstr "" -#: gnu/packages/perl.scm:2252 +#: gnu/packages/perl.scm:2279 msgid "DateTime rfc2445 recurrences" msgstr "" -#: gnu/packages/perl.scm:2253 +#: gnu/packages/perl.scm:2280 msgid "" "This module provides convenience methods that let you easily\n" "create DateTime::Set objects for RFC 2445 style recurrences." msgstr "" -#: gnu/packages/perl.scm:2274 +#: gnu/packages/perl.scm:2301 msgid "DateTime::Set extension for basic recurrences" msgstr "" -#: gnu/packages/perl.scm:2275 +#: gnu/packages/perl.scm:2302 msgid "" "This module provides convenience methods that let you easily\n" "create DateTime::Set objects for various recurrences, such as \"once a month\"\n" @@ -11697,11 +12653,11 @@ msgid "" "\"every Monday, Wednesday and Thursday at 10:00 AM and 2:00 PM\"." msgstr "" -#: gnu/packages/perl.scm:2300 +#: gnu/packages/perl.scm:2327 msgid "Create DateTime parser classes and objects" msgstr "" -#: gnu/packages/perl.scm:2301 +#: gnu/packages/perl.scm:2328 msgid "" "DateTime::Format::Builder creates DateTime parsers. Many\n" "string formats of dates and times are simple and just require a basic regular\n" @@ -11709,43 +12665,43 @@ msgid "" "to do this without writing reams of structural code." msgstr "" -#: gnu/packages/perl.scm:2328 +#: gnu/packages/perl.scm:2355 msgid "Parse data/time strings" msgstr "" -#: gnu/packages/perl.scm:2329 +#: gnu/packages/perl.scm:2356 msgid "" "DateTime::Format::Flexible attempts to take any string you\n" "give it and parse it into a DateTime object." msgstr "" -#: gnu/packages/perl.scm:2355 +#: gnu/packages/perl.scm:2382 msgid "Parse and format iCal datetime and duration strings" msgstr "" -#: gnu/packages/perl.scm:2356 +#: gnu/packages/perl.scm:2383 msgid "" "This module understands the ICal date/time and duration\n" "formats, as defined in RFC 2445. It can be used to parse these formats in\n" "order to create the appropriate objects." msgstr "" -#: gnu/packages/perl.scm:2388 +#: gnu/packages/perl.scm:2415 msgid "Machine-readable date/time with natural parsing" msgstr "" -#: gnu/packages/perl.scm:2389 +#: gnu/packages/perl.scm:2416 msgid "" "DateTime::Format::Natural takes a string with a human\n" "readable date/time and creates a machine readable one by applying natural\n" "parsing logic." msgstr "" -#: gnu/packages/perl.scm:2416 +#: gnu/packages/perl.scm:2443 msgid "Parse and format strp and strf time patterns" msgstr "" -#: gnu/packages/perl.scm:2417 +#: gnu/packages/perl.scm:2444 msgid "" "This module implements most of `strptime(3)`, the POSIX\n" "function that is the reverse of `strftime(3)`, for `DateTime`. While\n" @@ -11753,21 +12709,21 @@ msgid "" "takes a string and a pattern and returns the `DateTime` object associated." msgstr "" -#: gnu/packages/perl.scm:2449 +#: gnu/packages/perl.scm:2476 msgid "Localization support for DateTime.pm" msgstr "" -#: gnu/packages/perl.scm:2450 +#: gnu/packages/perl.scm:2477 msgid "" "The DateTime::Locale modules provide localization data for\n" "the DateTime.pm class." msgstr "" -#: gnu/packages/perl.scm:2478 +#: gnu/packages/perl.scm:2505 msgid "Time zone object for Perl" msgstr "" -#: gnu/packages/perl.scm:2479 +#: gnu/packages/perl.scm:2506 msgid "" "This class is the base class for all time zone objects. A\n" "time zone is represented internally as a set of observances, each of which\n" @@ -11777,32 +12733,32 @@ msgid "" "DateTime::TimeZone methods." msgstr "" -#: gnu/packages/perl.scm:2509 +#: gnu/packages/perl.scm:2536 msgid "Parse date/time strings" msgstr "" -#: gnu/packages/perl.scm:2510 +#: gnu/packages/perl.scm:2537 msgid "" "DateTimeX::Easy uses a variety of DateTime::Format packages\n" "to create DateTime objects, with some custom tweaks to smooth out the rough\n" "edges (mainly concerning timezone detection and selection)." msgstr "" -#: gnu/packages/perl.scm:2531 +#: gnu/packages/perl.scm:2558 msgid "Convert between DateTime and RFC2822/822 formats" msgstr "" -#: gnu/packages/perl.scm:2532 +#: gnu/packages/perl.scm:2559 msgid "" "RFCs 2822 and 822 specify date formats to be used by email.\n" "This module parses and emits such dates." msgstr "" -#: gnu/packages/perl.scm:2554 +#: gnu/packages/perl.scm:2581 msgid "Parse and format W3CDTF datetime strings" msgstr "" -#: gnu/packages/perl.scm:2556 +#: gnu/packages/perl.scm:2583 msgid "" "This module understands the W3CDTF date/time format, an ISO 8601 profile,\n" "defined at https://www.w3.org/TR/NOTE-datetime. This format is the native date\n" @@ -11810,103 +12766,115 @@ msgid "" "the appropriate objects." msgstr "" -#: gnu/packages/perl.scm:2578 +#: gnu/packages/perl.scm:2605 msgid "Meatier version of caller" msgstr "" -#: gnu/packages/perl.scm:2579 +#: gnu/packages/perl.scm:2606 msgid "Devel::Caller provides meatier version of caller." msgstr "" -#: gnu/packages/perl.scm:2597 +#: gnu/packages/perl.scm:2624 msgid "Check that a command is available" msgstr "" -#: gnu/packages/perl.scm:2598 +#: gnu/packages/perl.scm:2625 msgid "" "Devel::CheckBin is a perl module that checks whether a\n" "particular command is available." msgstr "" -#: gnu/packages/perl.scm:2617 +#: gnu/packages/perl.scm:2645 +msgid "Check that a library is available" +msgstr "" + +#: gnu/packages/perl.scm:2647 +msgid "" +"@code{Devel::CheckLib} is a Perl module that checks whether a particular\n" +"C library and its headers are available. You can also check for the presence of\n" +"particular functions in a library, or even that those functions return\n" +"particular results." +msgstr "" + +#: gnu/packages/perl.scm:2668 msgid "Check compiler availability" msgstr "" -#: gnu/packages/perl.scm:2618 +#: gnu/packages/perl.scm:2669 msgid "" "@code{Devel::CheckCompiler} is a tiny module to check\n" "whether a compiler is available. It can test for a C99 compiler, or\n" "you can tell it to compile a C source file with optional linker flags." msgstr "" -#: gnu/packages/perl.scm:2640 +#: gnu/packages/perl.scm:2691 msgid "Find memory cycles in objects" msgstr "" -#: gnu/packages/perl.scm:2642 +#: gnu/packages/perl.scm:2693 msgid "" "@code{Devel::Cycle} This is a tool for finding circular references in\n" "objects and other types of references. Because of Perl's reference-count\n" "based memory management, circular references will cause memory leaks." msgstr "" -#: gnu/packages/perl.scm:2663 +#: gnu/packages/perl.scm:2714 msgid "Provides equivalent of ${^GLOBAL_PHASE} eq 'DESTRUCT' for older perls" msgstr "" -#: gnu/packages/perl.scm:2664 +#: gnu/packages/perl.scm:2715 msgid "" "Devel::GlobalDestruction provides a function returning the\n" "equivalent of \"$@{^GLOBAL_PHASE@} eq 'DESTRUCT'\" for older perls." msgstr "" -#: gnu/packages/perl.scm:2685 +#: gnu/packages/perl.scm:2736 msgid "Forces the unavailability of specified Perl modules (for testing)" msgstr "" -#: gnu/packages/perl.scm:2686 +#: gnu/packages/perl.scm:2737 msgid "" "Given a list of Perl modules/filenames, this module makes\n" "@code{require} and @code{use} statements fail (no matter whether the specified\n" "files/modules are installed or not)." msgstr "" -#: gnu/packages/perl.scm:2707 +#: gnu/packages/perl.scm:2758 msgid "Alias lexical variables" msgstr "" -#: gnu/packages/perl.scm:2708 +#: gnu/packages/perl.scm:2759 msgid "" "Devel::LexAlias provides the ability to alias a lexical\n" "variable in a subroutines scope to one of your choosing." msgstr "" -#: gnu/packages/perl.scm:2732 +#: gnu/packages/perl.scm:2783 msgid "Introspect overloaded operators" msgstr "" -#: gnu/packages/perl.scm:2733 +#: gnu/packages/perl.scm:2784 msgid "" "Devel::OverloadInfo returns information about overloaded\n" "operators for a given class (or object), including where in the inheritance\n" "hierarchy the overloads are declared and where the code implementing it is." msgstr "" -#: gnu/packages/perl.scm:2760 +#: gnu/packages/perl.scm:2811 msgid "Partial dumping of data structures" msgstr "" -#: gnu/packages/perl.scm:2761 +#: gnu/packages/perl.scm:2812 msgid "" "This module is a data dumper optimized for logging of\n" "arbitrary parameters." msgstr "" -#: gnu/packages/perl.scm:2779 +#: gnu/packages/perl.scm:2830 msgid "Object representing a stack trace" msgstr "" -#: gnu/packages/perl.scm:2780 +#: gnu/packages/perl.scm:2831 msgid "" "The Devel::StackTrace module contains two classes,\n" "Devel::StackTrace and Devel::StackTrace::Frame. These objects encapsulate the\n" @@ -11914,11 +12882,11 @@ msgid "" "providing a simple interface to this data." msgstr "" -#: gnu/packages/perl.scm:2802 +#: gnu/packages/perl.scm:2853 msgid "Displays stack trace in HTML" msgstr "" -#: gnu/packages/perl.scm:2803 +#: gnu/packages/perl.scm:2854 msgid "" "Devel::StackTrace::AsHTML adds as_html method to\n" "Devel::StackTrace which displays the stack trace in beautiful HTML, with code\n" @@ -11927,29 +12895,29 @@ msgid "" "each stack frame." msgstr "" -#: gnu/packages/perl.scm:2824 +#: gnu/packages/perl.scm:2875 msgid "Dump symbol names or the symbol table" msgstr "" -#: gnu/packages/perl.scm:2825 +#: gnu/packages/perl.scm:2876 msgid "Devel::Symdump provides access to the perl symbol table." msgstr "" -#: gnu/packages/perl.scm:2842 +#: gnu/packages/perl.scm:2893 msgid "Keyed-Hashing for Message Authentication" msgstr "" -#: gnu/packages/perl.scm:2843 +#: gnu/packages/perl.scm:2894 msgid "" "The Digest::HMAC module follows the common Digest::\n" "interface for the RFC 2104 HMAC mechanism." msgstr "" -#: gnu/packages/perl.scm:2868 +#: gnu/packages/perl.scm:2919 msgid "Perl interface to the MD-5 algorithm" msgstr "Perlgrænseflade til MD-5-algoritmen" -#: gnu/packages/perl.scm:2870 +#: gnu/packages/perl.scm:2921 msgid "" "The @code{Digest::MD5} module allows you to use the MD5 Message Digest\n" "algorithm from within Perl programs. The algorithm takes as\n" @@ -11957,41 +12925,41 @@ msgid "" "128-bit \"fingerprint\" or \"message digest\" of the input." msgstr "" -#: gnu/packages/perl.scm:2888 +#: gnu/packages/perl.scm:2939 msgid "Perl implementation of the SHA-1 message digest algorithm" msgstr "" -#: gnu/packages/perl.scm:2890 +#: gnu/packages/perl.scm:2941 msgid "" "This package provides 'Digest::SHA1', an implementation of the NIST\n" "SHA-1 message digest algorithm for use by Perl programs." msgstr "" -#: gnu/packages/perl.scm:2912 +#: gnu/packages/perl.scm:2962 msgid "Declare version conflicts for your dist" msgstr "" -#: gnu/packages/perl.scm:2913 +#: gnu/packages/perl.scm:2963 msgid "" "This module allows you to specify conflicting versions of\n" "modules separately and deal with them after the module is done installing." msgstr "" -#: gnu/packages/perl.scm:2933 +#: gnu/packages/perl.scm:2983 msgid "Detect the encoding of data" msgstr "" -#: gnu/packages/perl.scm:2934 +#: gnu/packages/perl.scm:2984 msgid "" "This package provides a class @code{Encode::Detect} to detect\n" "the encoding of data." msgstr "" -#: gnu/packages/perl.scm:2952 +#: gnu/packages/perl.scm:3002 msgid "ASCII mapping for eucJP encoding" msgstr "ASCII-oversættelse for eucJP-kodning" -#: gnu/packages/perl.scm:2953 +#: gnu/packages/perl.scm:3003 msgid "" "This package provides an ASCII mapping for the eucJP\n" "encoding." @@ -11999,21 +12967,21 @@ msgstr "" "Denne pakke tilbyder en ASCII-oversættelse for eucJP-\n" "kodningen." -#: gnu/packages/perl.scm:2971 +#: gnu/packages/perl.scm:3021 msgid "JIS X 0212 (aka JIS 2000) encodings" msgstr "JIS X 0212-kodninger (aka JIS 2000)" -#: gnu/packages/perl.scm:2972 +#: gnu/packages/perl.scm:3022 msgid "" "This package provides encodings for JIS X 0212, which is\n" "also known as JIS 2000." msgstr "" -#: gnu/packages/perl.scm:2995 +#: gnu/packages/perl.scm:3045 msgid "Additional Chinese encodings" msgstr "Yderligere kinesiske kodninger" -#: gnu/packages/perl.scm:2996 +#: gnu/packages/perl.scm:3046 msgid "" "This Perl module provides Chinese encodings that are not\n" "part of Perl by default, including \"BIG5-1984\", \"BIG5-2003\", \"BIG5PLUS\",\n" @@ -12021,11 +12989,11 @@ msgid "" "\"UNISYS\"." msgstr "" -#: gnu/packages/perl.scm:3018 +#: gnu/packages/perl.scm:3068 msgid "Advanced operations on path variables" msgstr "" -#: gnu/packages/perl.scm:3019 +#: gnu/packages/perl.scm:3069 msgid "" "@code{Env::Path} presents an object-oriented interface to\n" "path variables, defined as that subclass of environment variables which name\n" @@ -12033,11 +13001,11 @@ msgid "" "separator." msgstr "" -#: gnu/packages/perl.scm:3039 +#: gnu/packages/perl.scm:3089 msgid "OO-ish Error/Exception handling for Perl" msgstr "" -#: gnu/packages/perl.scm:3040 +#: gnu/packages/perl.scm:3090 msgid "" "The Error package provides two interfaces. Firstly Error\n" "provides a procedural interface to exception handling. Secondly Error is a\n" @@ -12045,11 +13013,11 @@ msgid "" "catch, or can simply be recorded." msgstr "" -#: gnu/packages/perl.scm:3065 +#: gnu/packages/perl.scm:3115 msgid "Safely and cleanly create closures via string eval" msgstr "" -#: gnu/packages/perl.scm:3066 +#: gnu/packages/perl.scm:3116 msgid "" "String eval is often used for dynamic code generation. For\n" "instance, Moose uses it heavily, to generate inlined versions of accessors and\n" @@ -12063,32 +13031,32 @@ msgid "" "errors are rethrown automatically." msgstr "" -#: gnu/packages/perl.scm:3095 +#: gnu/packages/perl.scm:3145 msgid "Allows you to declare real exception classes in Perl" msgstr "" -#: gnu/packages/perl.scm:3096 +#: gnu/packages/perl.scm:3146 msgid "" "Exception::Class allows you to declare exception hierarchies\n" "in your modules in a \"Java-esque\" manner." msgstr "" -#: gnu/packages/perl.scm:3112 +#: gnu/packages/perl.scm:3162 msgid "Lightweight exporting of functions and variables" msgstr "" -#: gnu/packages/perl.scm:3114 +#: gnu/packages/perl.scm:3164 msgid "" "Exporter::Lite is an alternative to Exporter, intended to provide a\n" "lightweight subset of the most commonly-used functionality. It supports\n" "import(), @@EXPORT and @@EXPORT_OK and not a whole lot else." msgstr "" -#: gnu/packages/perl.scm:3134 +#: gnu/packages/perl.scm:3184 msgid "Exporter with the features of Sub::Exporter but only core dependencies" msgstr "" -#: gnu/packages/perl.scm:3135 +#: gnu/packages/perl.scm:3185 msgid "" "Exporter::Tiny supports many of Sub::Exporter's\n" "external-facing features including renaming imported functions with the `-as`,\n" @@ -12097,38 +13065,32 @@ msgid "" "only about 40% as many lines of code and with zero non-core dependencies." msgstr "" -#: gnu/packages/perl.scm:3161 gnu/packages/perl.scm:3222 -msgid "Easily build XS extensions that depend on XS extensions" -msgstr "" - -#: gnu/packages/perl.scm:3162 -msgid "" -"ExtUtils::Depends builds XS extensions that depend on XS\n" -"extensions" -msgstr "" - -#: gnu/packages/perl.scm:3182 +#: gnu/packages/perl.scm:3208 msgid "Build.PL install path logic made easy" msgstr "" -#: gnu/packages/perl.scm:3183 +#: gnu/packages/perl.scm:3209 msgid "" "This module tries to make install path resolution as easy as\n" "possible." msgstr "" -#: gnu/packages/perl.scm:3201 +#: gnu/packages/perl.scm:3227 msgid "Wrapper for perl's configuration" msgstr "" -#: gnu/packages/perl.scm:3202 +#: gnu/packages/perl.scm:3228 msgid "" "ExtUtils::Config is an abstraction around the %Config hash.\n" "By itself it is not a particularly interesting module by any measure, however\n" "it ties together a family of modern toolchain modules." msgstr "" -#: gnu/packages/perl.scm:3224 +#: gnu/packages/perl.scm:3248 +msgid "Easily build XS extensions that depend on XS extensions" +msgstr "" + +#: gnu/packages/perl.scm:3250 msgid "" "This module tries to make it easy to build Perl extensions that use\n" "functions and typemaps provided by other perl extensions. This means that a\n" @@ -12136,21 +13098,21 @@ msgid "" "XS interface besides the perl one." msgstr "" -#: gnu/packages/perl.scm:3244 +#: gnu/packages/perl.scm:3270 msgid "Various portability utilities for module builders" msgstr "" -#: gnu/packages/perl.scm:3245 +#: gnu/packages/perl.scm:3271 msgid "" "This module provides various portable helper functions for\n" "module building modules." msgstr "" -#: gnu/packages/perl.scm:3265 +#: gnu/packages/perl.scm:3291 msgid "Tool to build C libraries" msgstr "Værktøj til at bygge C-biblioteker" -#: gnu/packages/perl.scm:3266 +#: gnu/packages/perl.scm:3292 msgid "" "Some Perl modules need to ship C libraries together with\n" "their Perl code. Although there are mechanisms to compile and link (or glue)\n" @@ -12158,11 +13120,11 @@ msgid "" "self-contained C libraries. This module main goal is to help in that task." msgstr "" -#: gnu/packages/perl.scm:3287 +#: gnu/packages/perl.scm:3313 msgid "Simplistic interface to pkg-config" msgstr "" -#: gnu/packages/perl.scm:3289 +#: gnu/packages/perl.scm:3315 msgid "" "@code{ExtUtils::PkgConfig} is a very simplistic interface to the\n" "@command{pkg-config} utility, intended for use in the @file{Makefile.PL}\n" @@ -12170,21 +13132,21 @@ msgid "" "It is really just boilerplate code that you would have written yourself." msgstr "" -#: gnu/packages/perl.scm:3321 +#: gnu/packages/perl.scm:3347 msgid "Watch for changes to files" msgstr "" -#: gnu/packages/perl.scm:3322 +#: gnu/packages/perl.scm:3348 msgid "" "This module provides a class to monitor a directory for\n" "changes made to any file." msgstr "" -#: gnu/packages/perl.scm:3343 +#: gnu/packages/perl.scm:3369 msgid "Get directories of configuration files" msgstr "" -#: gnu/packages/perl.scm:3344 +#: gnu/packages/perl.scm:3370 msgid "" "This module is a helper for installing, reading and finding\n" "configuration file locations. @code{File::ConfigDir} is a module to help out\n" @@ -12192,44 +13154,44 @@ msgid "" "configuration files from more than one location." msgstr "" -#: gnu/packages/perl.scm:3364 +#: gnu/packages/perl.scm:3390 msgid "Recursively copy files and directories" msgstr "" -#: gnu/packages/perl.scm:3365 +#: gnu/packages/perl.scm:3391 msgid "" "This module has 3 functions: one to copy files only, one to\n" "copy directories only, and one to do either depending on the argument's\n" "type." msgstr "" -#: gnu/packages/perl.scm:3387 +#: gnu/packages/perl.scm:3413 msgid "Alternative interface to File::Find" msgstr "" -#: gnu/packages/perl.scm:3388 +#: gnu/packages/perl.scm:3414 msgid "" "File::Find::Rule is a friendlier interface to File::Find.\n" "It allows you to build rules which specify the desired files and\n" "directories." msgstr "" -#: gnu/packages/perl.scm:3411 +#: gnu/packages/perl.scm:3437 msgid "Common rules for searching for Perl things" msgstr "Gængse regler til at søge efter Perlsager" -#: gnu/packages/perl.scm:3412 +#: gnu/packages/perl.scm:3438 msgid "" "File::Find::Rule::Perl provides methods for finding various\n" "types Perl-related files, or replicating search queries run on a distribution\n" "in various parts of the CPAN ecosystem." msgstr "" -#: gnu/packages/perl.scm:3433 +#: gnu/packages/perl.scm:3459 msgid "Matches patterns in a series of files" msgstr "" -#: gnu/packages/perl.scm:3434 +#: gnu/packages/perl.scm:3460 msgid "" "@code{File::Grep} provides similar functionality as perl's\n" "builtin @code{grep}, @code{map}, and @code{foreach} commands, but iterating\n" @@ -12237,11 +13199,11 @@ msgid "" "provide a quick dropin when such functionality is needed." msgstr "" -#: gnu/packages/perl.scm:3457 +#: gnu/packages/perl.scm:3483 msgid "Find your home and other directories on any platform" msgstr "" -#: gnu/packages/perl.scm:3458 +#: gnu/packages/perl.scm:3484 msgid "" "File::HomeDir is a module for locating the directories that\n" "are \"owned\" by a user (typically your user) and to solve the various issues\n" @@ -12249,22 +13211,22 @@ msgid "" "platforms." msgstr "" -#: gnu/packages/perl.scm:3480 +#: gnu/packages/perl.scm:3506 msgid "Create or remove directory trees" msgstr "" -#: gnu/packages/perl.scm:3481 +#: gnu/packages/perl.scm:3507 msgid "" "This module provide a convenient way to create directories\n" "of arbitrary depth and to delete an entire directory subtree from the\n" "file system." msgstr "" -#: gnu/packages/perl.scm:3504 +#: gnu/packages/perl.scm:3530 msgid "Change directory temporarily for a limited scope" msgstr "" -#: gnu/packages/perl.scm:3505 +#: gnu/packages/perl.scm:3531 msgid "" "@code{File::pushd} does a temporary @code{chdir} that is\n" "easily and automatically reverted, similar to @code{pushd} in some Unix\n" @@ -12275,24 +13237,24 @@ msgid "" "at the end of the scope." msgstr "" -#: gnu/packages/perl.scm:3533 +#: gnu/packages/perl.scm:3559 msgid "" "Perl extension for crawling directory trees and compiling\n" "lists of files" msgstr "" -#: gnu/packages/perl.scm:3536 +#: gnu/packages/perl.scm:3562 msgid "" "The File::List module crawls the directory tree starting at the\n" "provided base directory and can return files (and/or directories if desired)\n" "matching a regular expression." msgstr "" -#: gnu/packages/perl.scm:3557 +#: gnu/packages/perl.scm:3583 msgid "Read a file backwards by lines" msgstr "" -#: gnu/packages/perl.scm:3558 +#: gnu/packages/perl.scm:3584 msgid "" "This module reads a file backwards line by line. It is\n" "simple to use, memory efficient and fast. It supports both an object and a\n" @@ -12304,11 +13266,11 @@ msgid "" "the input record separator string on a per file basis." msgstr "" -#: gnu/packages/perl.scm:3582 +#: gnu/packages/perl.scm:3608 msgid "Remove files and directories in Perl" msgstr "" -#: gnu/packages/perl.scm:3583 +#: gnu/packages/perl.scm:3609 msgid "" "File::Remove::remove removes files and directories. It acts\n" "like /bin/rm, for the most part. Although \"unlink\" can be given a list of\n" @@ -12316,11 +13278,11 @@ msgid "" "accepts wildcards, * and ?, as arguments for file names." msgstr "" -#: gnu/packages/perl.scm:3607 +#: gnu/packages/perl.scm:3633 msgid "Locate per-dist and per-module shared files" msgstr "" -#: gnu/packages/perl.scm:3608 +#: gnu/packages/perl.scm:3634 msgid "" "The intent of File::ShareDir is to provide a companion to\n" "Class::Inspector and File::HomeDir. Quite often you want or need your Perl\n" @@ -12330,93 +13292,93 @@ msgid "" "the installation." msgstr "" -#: gnu/packages/perl.scm:3630 +#: gnu/packages/perl.scm:3656 msgid "Locate per-dist shared files" msgstr "Lokaliser per-dist-delte filer" -#: gnu/packages/perl.scm:3631 +#: gnu/packages/perl.scm:3657 msgid "" "File::ShareDir::Dist finds share directories for\n" "distributions. It is a companion module to File::ShareDir." msgstr "" -#: gnu/packages/perl.scm:3651 +#: gnu/packages/perl.scm:3677 msgid "Install shared files" msgstr "Installer delte filer" -#: gnu/packages/perl.scm:3652 +#: gnu/packages/perl.scm:3678 msgid "" "File::ShareDir::Install allows you to install read-only data\n" "files from a distribution. It is a companion module to File::ShareDir, which\n" "allows you to locate these files after installation." msgstr "" -#: gnu/packages/perl.scm:3671 +#: gnu/packages/perl.scm:3697 msgid "Reading/Writing/Modifying of complete files" msgstr "" -#: gnu/packages/perl.scm:3672 +#: gnu/packages/perl.scm:3698 msgid "" "File::Slurp provides subroutines to read or write entire\n" "files with a simple call. It also has a subroutine for reading the list of\n" "file names in a directory." msgstr "" -#: gnu/packages/perl.scm:3695 +#: gnu/packages/perl.scm:3721 msgid "Simple, sane and efficient module to slurp a file" msgstr "" -#: gnu/packages/perl.scm:3696 +#: gnu/packages/perl.scm:3722 msgid "" "This module provides functions for fast and correct file\n" "slurping and spewing. All functions are optionally exported." msgstr "" -#: gnu/packages/perl.scm:3713 +#: gnu/packages/perl.scm:3739 msgid "Simple file reader and writer" msgstr "Simpel fillæser og skriver" -#: gnu/packages/perl.scm:3715 +#: gnu/packages/perl.scm:3741 msgid "This module provides functions for fast reading and writing of files." msgstr "Dette modul tilbyder funktioner til hurtig læsning og skrivning af filer." -#: gnu/packages/perl.scm:3734 +#: gnu/packages/perl.scm:3760 msgid "Return name and handle of a temporary file safely" msgstr "" -#: gnu/packages/perl.scm:3735 +#: gnu/packages/perl.scm:3761 msgid "" "File::Temp can be used to create and open temporary files in\n" "a safe way." msgstr "" -#: gnu/packages/perl.scm:3752 +#: gnu/packages/perl.scm:3778 msgid "Portable implementation of the `which' utility" msgstr "" -#: gnu/packages/perl.scm:3754 +#: gnu/packages/perl.scm:3780 msgid "" "File::Which was created to be able to get the paths to executable\n" "programs on systems under which the `which' program wasn't implemented in the\n" "shell." msgstr "" -#: gnu/packages/perl.scm:3777 +#: gnu/packages/perl.scm:3802 msgid "Extended Unix style glob functionality" msgstr "" -#: gnu/packages/perl.scm:3778 +#: gnu/packages/perl.scm:3803 msgid "" "@code{File::Zglob} provides a traditional Unix @code{glob}\n" "functionality; it returns a list of file names that match the given pattern.\n" "For instance, it supports the @code{**/*.pm} form." msgstr "" -#: gnu/packages/perl.scm:3797 +#: gnu/packages/perl.scm:3822 msgid "Module to handle parsing command line options" msgstr "" -#: gnu/packages/perl.scm:3798 +#: gnu/packages/perl.scm:3823 msgid "" "The @code{Getopt::Long} module implements an extended getopt\n" "function called @code{GetOptions()}. It parses the command line from\n" @@ -12430,11 +13392,11 @@ msgid "" "single-letter approach, is provided but not enabled by default." msgstr "" -#: gnu/packages/perl.scm:3832 +#: gnu/packages/perl.scm:3857 msgid "Getopt::Long, but simpler and more powerful" msgstr "" -#: gnu/packages/perl.scm:3833 +#: gnu/packages/perl.scm:3858 msgid "" "Getopt::Long::Descriptive is yet another Getopt library.\n" "It's built atop Getopt::Long, and gets a lot of its features, but tries to\n" @@ -12442,31 +13404,31 @@ msgid "" "usage (help) messages, data validation, and a few other useful features." msgstr "" -#: gnu/packages/perl.scm:3851 +#: gnu/packages/perl.scm:3876 msgid "Table-driven argument parsing for Perl" msgstr "" -#: gnu/packages/perl.scm:3853 +#: gnu/packages/perl.scm:3878 msgid "" "Getopt::Tabular is a Perl 5 module for table-driven argument parsing,\n" "vaguely inspired by John Ousterhout's Tk_ParseArgv." msgstr "" -#: gnu/packages/perl.scm:3875 +#: gnu/packages/perl.scm:3899 msgid "Graph data structures and algorithms" msgstr "" -#: gnu/packages/perl.scm:3876 +#: gnu/packages/perl.scm:3900 msgid "" "This is @code{Graph}, a Perl module for dealing with graphs,\n" "the abstract data structures." msgstr "" -#: gnu/packages/perl.scm:3893 +#: gnu/packages/perl.scm:3917 msgid "Safe cleanup blocks implemented as guards" msgstr "" -#: gnu/packages/perl.scm:3894 +#: gnu/packages/perl.scm:3918 msgid "" "@code{Guard} implements so-called @dfn{guards}. A guard is\n" "something (usually an object) that \"guards\" a resource, ensuring that it is\n" @@ -12477,11 +13439,11 @@ msgid "" "which are tied to the scope exit." msgstr "" -#: gnu/packages/perl.scm:3930 +#: gnu/packages/perl.scm:3954 msgid "Lightweight field hash for inside-out objects" msgstr "" -#: gnu/packages/perl.scm:3931 +#: gnu/packages/perl.scm:3955 msgid "" "@code{Hash::FieldHash} provides the field hash mechanism\n" "which supports the inside-out technique. It is an alternative to\n" @@ -12489,11 +13451,11 @@ msgid "" "relic support." msgstr "" -#: gnu/packages/perl.scm:3951 +#: gnu/packages/perl.scm:3975 msgid "Merge arbitrarily deep hashes into a single hash" msgstr "" -#: gnu/packages/perl.scm:3952 +#: gnu/packages/perl.scm:3976 msgid "" "Hash::Merge merges two arbitrarily deep hashes into a single\n" "hash. That is, at any level, it will add non-conflicting key-value pairs from\n" @@ -12503,21 +13465,21 @@ msgid "" "merged." msgstr "" -#: gnu/packages/perl.scm:3974 +#: gnu/packages/perl.scm:3998 msgid "Store multiple values per key" msgstr "" -#: gnu/packages/perl.scm:3975 +#: gnu/packages/perl.scm:3999 msgid "" "Hash::MultiValue is an object (and a plain hash reference)\n" "that may contain multiple values per key, inspired by MultiDict of WebOb." msgstr "" -#: gnu/packages/perl.scm:3993 +#: gnu/packages/perl.scm:4017 msgid "Alternative but compatible interface to modules that export symbols" msgstr "" -#: gnu/packages/perl.scm:3994 +#: gnu/packages/perl.scm:4018 msgid "" "This module acts as a layer between Exporter and modules which\n" "consume exports. It is feature-compatible with Exporter, plus some much needed\n" @@ -12527,11 +13489,11 @@ msgid "" "variables." msgstr "" -#: gnu/packages/perl.scm:4018 +#: gnu/packages/perl.scm:4042 msgid "Import packages into other packages" msgstr "Importer pakker ind i andre pakker" -#: gnu/packages/perl.scm:4019 +#: gnu/packages/perl.scm:4043 msgid "" "Writing exporters is a pain. Some use Exporter, some use\n" "Sub::Exporter, some use Moose::Exporter, some use Exporter::Declare ... and\n" @@ -12541,30 +13503,30 @@ msgid "" "compilation. Import::Into provides global methods to make this painless." msgstr "" -#: gnu/packages/perl.scm:4041 +#: gnu/packages/perl.scm:4065 msgid "Use modules in inc/ if newer than installed" msgstr "" -#: gnu/packages/perl.scm:4042 +#: gnu/packages/perl.scm:4066 msgid "" "The inc::latest module helps bootstrap configure-time\n" "dependencies for CPAN distributions. These dependencies get bundled into the\n" "inc directory within a distribution and are used by Makefile.PL or Build.PL." msgstr "" -#: gnu/packages/perl.scm:4062 +#: gnu/packages/perl.scm:4086 msgid "Lexically warn about using the indirect method call syntax" msgstr "" -#: gnu/packages/perl.scm:4064 +#: gnu/packages/perl.scm:4088 msgid "Indirect warns about using the indirect method call syntax." msgstr "" -#: gnu/packages/perl.scm:4084 +#: gnu/packages/perl.scm:4108 msgid "Write Perl subroutines in other programming languages" msgstr "" -#: gnu/packages/perl.scm:4085 +#: gnu/packages/perl.scm:4109 msgid "" "The @code{Inline} module allows you to put source code\n" "from other programming languages directly (inline) in a Perl script or\n" @@ -12572,11 +13534,11 @@ msgid "" "for immediate access from Perl." msgstr "" -#: gnu/packages/perl.scm:4115 +#: gnu/packages/perl.scm:4139 msgid "C Language Support for Inline" msgstr "" -#: gnu/packages/perl.scm:4116 +#: gnu/packages/perl.scm:4140 msgid "" "The @code{Inline::C} module allows you to write Perl\n" "subroutines in C. Since version 0.30 the @code{Inline} module supports\n" @@ -12585,11 +13547,11 @@ msgid "" "It also goes a bit into Perl C internals." msgstr "" -#: gnu/packages/perl.scm:4142 +#: gnu/packages/perl.scm:4166 msgid "@code{IO::All} to Larry Wall!" msgstr "" -#: gnu/packages/perl.scm:4143 +#: gnu/packages/perl.scm:4167 msgid "" "@code{IO::All} combines all of the best Perl IO modules into\n" "a single nifty object oriented interface to greatly simplify your everyday\n" @@ -12597,11 +13559,11 @@ msgid "" "@code{IO::All} object. And that object can do it all!" msgstr "" -#: gnu/packages/perl.scm:4165 +#: gnu/packages/perl.scm:4189 msgid "Capture STDOUT and STDERR from Perl code, subprocesses or XS" msgstr "" -#: gnu/packages/perl.scm:4166 +#: gnu/packages/perl.scm:4190 msgid "" "@code{IO::CaptureOutput} provides routines for capturing\n" "@code{STDOUT} and @code{STDERR} from perl subroutines, forked system\n" @@ -12611,64 +13573,64 @@ msgid "" "try @code{Capture::Tiny} instead." msgstr "" -#: gnu/packages/perl.scm:4188 +#: gnu/packages/perl.scm:4212 msgid "Utilities for interactive I/O" msgstr "" -#: gnu/packages/perl.scm:4189 +#: gnu/packages/perl.scm:4213 msgid "" "This module provides three utility subroutines that make it\n" "easier to develop interactive applications: is_interactive(), interactive(),\n" "and busy()." msgstr "" -#: gnu/packages/perl.scm:4208 +#: gnu/packages/perl.scm:4232 msgid "Emulate file interface for in-core strings" msgstr "" -#: gnu/packages/perl.scm:4209 +#: gnu/packages/perl.scm:4233 msgid "" "IO::String is an IO::File (and IO::Handle) compatible class\n" "that reads or writes data from in-core strings." msgstr "" -#: gnu/packages/perl.scm:4227 +#: gnu/packages/perl.scm:4251 msgid "IO:: interface for reading/writing an array of lines" msgstr "" -#: gnu/packages/perl.scm:4228 +#: gnu/packages/perl.scm:4252 msgid "" "This toolkit primarily provides modules for performing both\n" "traditional and object-oriented i/o) on things *other* than normal\n" "filehandles; in particular, IO::Scalar, IO::ScalarArray, and IO::Lines." msgstr "" -#: gnu/packages/perl.scm:4246 +#: gnu/packages/perl.scm:4270 msgid "Perl interface to pseudo ttys" msgstr "" -#: gnu/packages/perl.scm:4248 +#: gnu/packages/perl.scm:4272 msgid "" "This package provides the 'IO::Pty' and 'IO::Tty' Perl interfaces to\n" "pseudo ttys." msgstr "" -#: gnu/packages/perl.scm:4266 +#: gnu/packages/perl.scm:4290 msgid "Run interactive command-line programs" msgstr "" -#: gnu/packages/perl.scm:4267 +#: gnu/packages/perl.scm:4291 msgid "" "@code{IPC::Cmd} allows for the searching and execution of\n" "any binary on your system. It adheres to verbosity settings and is able to\n" "run interactively. It also has an option to capture output/error buffers." msgstr "" -#: gnu/packages/perl.scm:4296 +#: gnu/packages/perl.scm:4320 msgid "Run system() and background procs w/ piping, redirs, ptys" msgstr "" -#: gnu/packages/perl.scm:4297 +#: gnu/packages/perl.scm:4321 msgid "" "IPC::Run allows you run and interact with child processes\n" "using files, pipes, and pseudo-ttys. Both system()-style and scripted usages\n" @@ -12676,11 +13638,11 @@ msgid "" "both supported and may be mixed." msgstr "" -#: gnu/packages/perl.scm:4315 +#: gnu/packages/perl.scm:4339 msgid "Run a subprocess with input/output redirection" msgstr "Afvikl en underproces med inddata/uddata-videresendelse" -#: gnu/packages/perl.scm:4317 +#: gnu/packages/perl.scm:4341 msgid "" "The IPC::Run3 module allows you to run a subprocess and redirect stdin,\n" "stdout, and/or stderr to files and perl data structures. It aims to satisfy\n" @@ -12688,21 +13650,21 @@ msgid "" "Perlish API and none of the bloat and rarely used features of IPC::Run." msgstr "" -#: gnu/packages/perl.scm:4341 +#: gnu/packages/perl.scm:4364 msgid "Lightweight interface to shared memory" msgstr "" -#: gnu/packages/perl.scm:4342 +#: gnu/packages/perl.scm:4365 msgid "" "IPC::ShareLite provides a simple interface to shared memory,\n" "allowing data to be efficiently communicated between processes." msgstr "" -#: gnu/packages/perl.scm:4360 +#: gnu/packages/perl.scm:4383 msgid "Run commands simply, with detailed diagnostics" msgstr "" -#: gnu/packages/perl.scm:4361 +#: gnu/packages/perl.scm:4384 msgid "" "Calling Perl's in-built @code{system} function is easy,\n" "determining if it was successful is hard. Let's face it, @code{$?} isn't the\n" @@ -12713,21 +13675,21 @@ msgid "" "commands." msgstr "" -#: gnu/packages/perl.scm:4386 +#: gnu/packages/perl.scm:4409 msgid "JSON encoder/decoder for Perl" msgstr "" -#: gnu/packages/perl.scm:4387 +#: gnu/packages/perl.scm:4410 msgid "" "This module converts Perl data structures to JSON and vice\n" "versa using either JSON::XS or JSON::PP." msgstr "" -#: gnu/packages/perl.scm:4412 +#: gnu/packages/perl.scm:4435 msgid "Wrapper for Perl JSON classes" msgstr "" -#: gnu/packages/perl.scm:4414 +#: gnu/packages/perl.scm:4437 msgid "" "This module tries to provide a coherent API to bring together the\n" "various JSON modules currently on CPAN. This module will allow you to code to\n" @@ -12735,11 +13697,11 @@ msgid "" "installed." msgstr "" -#: gnu/packages/perl.scm:4438 +#: gnu/packages/perl.scm:4461 msgid "Cpanel::JSON::XS with fallback" msgstr "" -#: gnu/packages/perl.scm:4439 +#: gnu/packages/perl.scm:4462 msgid "" "This module first checks to see if either Cpanel::JSON::XS\n" "or JSON::XS is already loaded, in which case it uses that module. Otherwise\n" @@ -12747,23 +13709,23 @@ msgid "" "either uses the first module it finds or throws an error." msgstr "" -#: gnu/packages/perl.scm:4462 +#: gnu/packages/perl.scm:4485 msgid "JSON serialising/deserialising for Perl" msgstr "" -#: gnu/packages/perl.scm:4485 +#: gnu/packages/perl.scm:4508 msgid "Prevent leakage of lexical hints" msgstr "" -#: gnu/packages/perl.scm:4487 +#: gnu/packages/perl.scm:4510 msgid "Lexical::SealRequireHints prevents leakage of lexical hints" msgstr "" -#: gnu/packages/perl.scm:4504 +#: gnu/packages/perl.scm:4527 msgid "Bringing loggers and listeners together" msgstr "" -#: gnu/packages/perl.scm:4505 +#: gnu/packages/perl.scm:4528 msgid "" "@code{Log::Any} provides a standard log production API for\n" "modules. @code{Log::Any::Adapter} allows applications to choose the mechanism\n" @@ -12781,32 +13743,32 @@ msgid "" "logging mechanism." msgstr "" -#: gnu/packages/perl.scm:4541 +#: gnu/packages/perl.scm:4564 msgid "Log::Any adapter for Log::Log4perl" msgstr "" -#: gnu/packages/perl.scm:4542 +#: gnu/packages/perl.scm:4565 msgid "" "@code{Log::Any::Adapter::Log4perl} provides a\n" "@code{Log::Any} adapter using @code{Log::Log4perl} for logging." msgstr "" -#: gnu/packages/perl.scm:4563 +#: gnu/packages/perl.scm:4586 msgid "Log4j implementation for Perl" msgstr "" -#: gnu/packages/perl.scm:4564 +#: gnu/packages/perl.scm:4587 msgid "" "@code{Log::Log4perl} lets you remote-control and fine-tune\n" "the logging behaviour of your system from the outside. It implements the\n" "widely popular (Java-based) Log4j logging package in pure Perl." msgstr "" -#: gnu/packages/perl.scm:4584 +#: gnu/packages/perl.scm:4607 msgid "Log::Report in the lightest form" msgstr "" -#: gnu/packages/perl.scm:4586 +#: gnu/packages/perl.scm:4609 msgid "" "This module allows libraries to have a dependency to a small module\n" "instead of the full Log-Report distribution. The full power of\n" @@ -12816,81 +13778,81 @@ msgid "" "version." msgstr "" -#: gnu/packages/perl.scm:4611 +#: gnu/packages/perl.scm:4634 msgid "Get messages to users and logs" msgstr "" -#: gnu/packages/perl.scm:4613 +#: gnu/packages/perl.scm:4636 msgid "" "@code{Log::Report} combines three tasks which are closely related in\n" "one: logging, exceptions, and translations." msgstr "" -#: gnu/packages/perl.scm:4642 +#: gnu/packages/perl.scm:4665 msgid "High-level interface to Uniforum message translation" msgstr "" -#: gnu/packages/perl.scm:4643 +#: gnu/packages/perl.scm:4666 msgid "" "This package is an internationalization library for Perl\n" "that aims to be compatible with the Uniforum message translations system as\n" "implemented for example in GNU gettext." msgstr "" -#: gnu/packages/perl.scm:4662 +#: gnu/packages/perl.scm:4685 msgid "Transliterate text between writing systems" msgstr "" -#: gnu/packages/perl.scm:4663 +#: gnu/packages/perl.scm:4686 msgid "" "@code{Lingua::Translit} can be used to convert text from one\n" "writing system to another, based on national or international transliteration\n" "tables. Where possible a reverse transliteration is supported." msgstr "" -#: gnu/packages/perl.scm:4687 +#: gnu/packages/perl.scm:4710 msgid "Combination of List::Util and List::MoreUtils" msgstr "" -#: gnu/packages/perl.scm:4688 +#: gnu/packages/perl.scm:4711 msgid "" "This module exports all of the functions that either\n" "List::Util or List::MoreUtils defines, with preference to List::Util." msgstr "" -#: gnu/packages/perl.scm:4710 +#: gnu/packages/perl.scm:4733 msgid "Compare elements of two or more lists" msgstr "" -#: gnu/packages/perl.scm:4711 +#: gnu/packages/perl.scm:4734 msgid "" "@code{List::Compare} provides a module to perform\n" "comparative operations on two or more lists. Provided operations include\n" "intersections, unions, unique elements, complements and many more." msgstr "" -#: gnu/packages/perl.scm:4746 gnu/packages/perl.scm:4797 +#: gnu/packages/perl.scm:4769 gnu/packages/perl.scm:4820 msgid "Provide the stuff missing in List::Util" msgstr "" -#: gnu/packages/perl.scm:4747 +#: gnu/packages/perl.scm:4770 msgid "" "List::MoreUtils provides some trivial but commonly needed\n" "functionality on lists which is not going to go into List::Util." msgstr "" -#: gnu/packages/perl.scm:4769 +#: gnu/packages/perl.scm:4792 msgid "Provide the stuff missing in List::Util in XS" msgstr "" -#: gnu/packages/perl.scm:4770 +#: gnu/packages/perl.scm:4793 msgid "" "@code{List::MoreUtils::XS} provides some trivial but\n" "commonly needed functionality on lists which is not going to go into\n" "@code{List::Util}." msgstr "" -#: gnu/packages/perl.scm:4798 +#: gnu/packages/perl.scm:4821 msgid "" "@code{List::SomeUtils} provides some trivial but commonly\n" "needed functionality on lists which is not going to go into @code{List::Util}.\n" @@ -12902,11 +13864,11 @@ msgid "" "portions of this module couldn't be compiled on this machine." msgstr "" -#: gnu/packages/perl.scm:4827 +#: gnu/packages/perl.scm:4850 msgid "Bundle of ancient email modules" msgstr "" -#: gnu/packages/perl.scm:4828 +#: gnu/packages/perl.scm:4851 msgid "" "MailTools contains the following modules:\n" "@table @asis\n" @@ -12933,85 +13895,85 @@ msgid "" "@end table" msgstr "" -#: gnu/packages/perl.scm:4867 +#: gnu/packages/perl.scm:4890 msgid "Solution of bezier curves" msgstr "" -#: gnu/packages/perl.scm:4868 +#: gnu/packages/perl.scm:4891 msgid "" "This module implements the algorithm for the solution of Bezier\n" "curves as presented by Robert D Miller in Graphics Gems V, \"Quick and Simple\n" "Bezier Curve Drawing\"." msgstr "" -#: gnu/packages/perl.scm:4887 +#: gnu/packages/perl.scm:4910 msgid "Perl extension for rounding numbers" msgstr "Perludvidelse til afrundingstal" -#: gnu/packages/perl.scm:4888 +#: gnu/packages/perl.scm:4911 msgid "" "@code{Math::Round} provides functions to round numbers,\n" "both positive and negative, in various ways." msgstr "" -#: gnu/packages/perl.scm:4906 +#: gnu/packages/perl.scm:4929 msgid "Make functions faster by trading space for time" msgstr "" -#: gnu/packages/perl.scm:4907 +#: gnu/packages/perl.scm:4930 msgid "" "This package transparently speeds up functions by caching\n" "return values, trading space for time." msgstr "" -#: gnu/packages/perl.scm:4925 +#: gnu/packages/perl.scm:4948 msgid "Expiry plug-in for Memoize that adds LRU cache expiration" msgstr "" -#: gnu/packages/perl.scm:4926 +#: gnu/packages/perl.scm:4949 msgid "" "This module implements an expiry policy for Memoize that\n" "follows LRU semantics, that is, the last n results, where n is specified as\n" "the argument to the CACHESIZE parameter, will be cached." msgstr "" -#: gnu/packages/perl.scm:4944 +#: gnu/packages/perl.scm:4967 msgid "Charset information for MIME messages" msgstr "" -#: gnu/packages/perl.scm:4946 +#: gnu/packages/perl.scm:4969 msgid "" "@code{MIME::Charset} provides information about character sets used for\n" "MIME messages on Internet." msgstr "" -#: gnu/packages/perl.scm:4973 +#: gnu/packages/perl.scm:4996 msgid "Tools to manipulate MIME messages" msgstr "Værktøj til at manipulere MIME-beskeder" -#: gnu/packages/perl.scm:4975 +#: gnu/packages/perl.scm:4998 msgid "" "MIME-tools is a collection of Perl5 MIME:: modules for parsing,\n" "decoding, and generating single- or multipart (even nested multipart) MIME\n" "messages." msgstr "" -#: gnu/packages/perl.scm:4994 +#: gnu/packages/perl.scm:5017 msgid "Definition of MIME types" msgstr "Definition af MIME-typer" -#: gnu/packages/perl.scm:4995 +#: gnu/packages/perl.scm:5018 msgid "" "This module provides a list of known mime-types, combined\n" "from various sources. For instance, it contains all IANA types and the\n" "knowledge of Apache." msgstr "" -#: gnu/packages/perl.scm:5017 +#: gnu/packages/perl.scm:5040 msgid "Write your linewise code for handles; this does the rest" msgstr "" -#: gnu/packages/perl.scm:5018 +#: gnu/packages/perl.scm:5041 msgid "" "It's boring to deal with opening files for IO, converting\n" "strings to handle-like objects, and all that. With\n" @@ -13020,21 +13982,21 @@ msgid "" "file names are added for you." msgstr "" -#: gnu/packages/perl.scm:5044 +#: gnu/packages/perl.scm:5067 msgid "Enable all of the features of Modern Perl with one import" msgstr "" -#: gnu/packages/perl.scm:5045 +#: gnu/packages/perl.scm:5068 msgid "" "@code{Modern::Perl} provides a simple way to enable\n" "multiple, by now, standard libraries in a Perl program." msgstr "" -#: gnu/packages/perl.scm:5073 +#: gnu/packages/perl.scm:5096 msgid "Tiny replacement for Module::Build" msgstr "" -#: gnu/packages/perl.scm:5074 +#: gnu/packages/perl.scm:5097 msgid "" "Many Perl distributions use a Build.PL file instead of a\n" "Makefile.PL file to drive distribution configuration, build, test and\n" @@ -13044,11 +14006,11 @@ msgid "" "has less than 120, yet supports the features needed by most distributions." msgstr "" -#: gnu/packages/perl.scm:5102 +#: gnu/packages/perl.scm:5125 msgid "Module::Build class for building XS modules" msgstr "" -#: gnu/packages/perl.scm:5104 +#: gnu/packages/perl.scm:5127 msgid "" "@code{Module::Build::XSUtil} is subclass of @code{Module::Build}\n" "for support building XS modules.\n" @@ -13072,11 +14034,11 @@ msgid "" "@end enumerate" msgstr "" -#: gnu/packages/perl.scm:5140 +#: gnu/packages/perl.scm:5163 msgid "Find and use installed modules in a (sub)category" msgstr "" -#: gnu/packages/perl.scm:5141 +#: gnu/packages/perl.scm:5164 msgid "" "Module::Find lets you find and use modules in categories.\n" "This can be useful for auto-detecting driver or plugin modules. You can\n" @@ -13084,11 +14046,11 @@ msgid "" "subcategories." msgstr "" -#: gnu/packages/perl.scm:5167 +#: gnu/packages/perl.scm:5190 msgid "Loads alternate underlying implementations for a module" msgstr "" -#: gnu/packages/perl.scm:5168 +#: gnu/packages/perl.scm:5191 msgid "" "This module abstracts out the process of choosing one of\n" "several underlying implementations for a module. This can be used to provide\n" @@ -13097,11 +14059,11 @@ msgid "" "implementations." msgstr "" -#: gnu/packages/perl.scm:5206 +#: gnu/packages/perl.scm:5229 msgid "Standalone, extensible Perl module installer" msgstr "" -#: gnu/packages/perl.scm:5207 +#: gnu/packages/perl.scm:5230 msgid "" "Module::Install is a package for writing installers for\n" "CPAN (or CPAN-like) distributions that are clean, simple, minimalist, act in a\n" @@ -13109,52 +14071,66 @@ msgid "" "installation version 5.005 or newer." msgstr "" -#: gnu/packages/perl.scm:5228 +#: gnu/packages/perl.scm:5256 +msgid "Parse and examine a Perl distribution @file{MANIFEST} file" +msgstr "" + +#: gnu/packages/perl.scm:5258 +msgid "" +"@code{Module::Manifest} is a simple utility module created originally for\n" +"use in @code{Module::Inspector}.\n" +"\n" +"It can load a @file{MANIFEST} file that comes in a Perl distribution tarball,\n" +"examine the contents, and perform some simple tasks. It can also load the\n" +"@file{MANIFEST.SKIP} file and check that." +msgstr "" + +#: gnu/packages/perl.scm:5281 msgid "Give your Perl module the ability to have plugins" msgstr "" -#: gnu/packages/perl.scm:5229 +#: gnu/packages/perl.scm:5282 msgid "" "This module provides a simple but extensible way of having\n" "'plugins' for your Perl module." msgstr "" -#: gnu/packages/perl.scm:5248 +#: gnu/packages/perl.scm:5301 msgid "Perl runtime module handling" msgstr "" -#: gnu/packages/perl.scm:5249 +#: gnu/packages/perl.scm:5302 msgid "" "The functions exported by this module deal with runtime\n" "handling of Perl modules, which are normally handled at compile time." msgstr "" -#: gnu/packages/perl.scm:5272 +#: gnu/packages/perl.scm:5325 msgid "Provide information on conflicts for Module::Runtime" msgstr "" -#: gnu/packages/perl.scm:5273 +#: gnu/packages/perl.scm:5326 msgid "" "This module provides conflicts checking for Module::Runtime,\n" "which had a recent release that broke some versions of Moose. It is called\n" "from Moose::Conflicts and moose-outdated." msgstr "" -#: gnu/packages/perl.scm:5294 +#: gnu/packages/perl.scm:5347 msgid "Recursively scan Perl code for dependencies" msgstr "" -#: gnu/packages/perl.scm:5295 +#: gnu/packages/perl.scm:5348 msgid "" "Module::ScanDeps is a module to recursively scan Perl\n" "programs for dependencies." msgstr "" -#: gnu/packages/perl.scm:5315 +#: gnu/packages/perl.scm:5368 msgid "Module name tools and transformations" msgstr "" -#: gnu/packages/perl.scm:5316 +#: gnu/packages/perl.scm:5369 msgid "" "This module provides a few useful functions for manipulating\n" "module names. Its main aim is to centralise some of the functions commonly\n" @@ -13162,11 +14138,11 @@ msgid "" "module names to relative paths." msgstr "" -#: gnu/packages/perl.scm:5346 +#: gnu/packages/perl.scm:5399 msgid "Minimalist Object Orientation (with Moose compatibility)" msgstr "" -#: gnu/packages/perl.scm:5347 +#: gnu/packages/perl.scm:5400 msgid "" "Moo is an extremely light-weight Object Orientation system.\n" "It allows one to concisely define objects and roles with a convenient syntax\n" @@ -13174,11 +14150,11 @@ msgid "" "Moose and is optimised for rapid startup." msgstr "" -#: gnu/packages/perl.scm:5454 +#: gnu/packages/perl.scm:5507 msgid "Postmodern object system for Perl 5" msgstr "" -#: gnu/packages/perl.scm:5456 +#: gnu/packages/perl.scm:5509 msgid "" "Moose is a complete object system for Perl 5. It provides keywords for\n" "attribute declaration, object construction, inheritance, and maybe more. With\n" @@ -13189,11 +14165,11 @@ msgid "" "sentences." msgstr "" -#: gnu/packages/perl.scm:5485 +#: gnu/packages/perl.scm:5538 msgid "Emulate Class::Accessor::Fast behavior using Moose attributes" msgstr "" -#: gnu/packages/perl.scm:5486 +#: gnu/packages/perl.scm:5539 msgid "" "This module attempts to emulate the behavior of\n" "Class::Accessor::Fast as accurately as possible using the Moose attribute\n" @@ -13201,21 +14177,21 @@ msgid "" "private methods are not." msgstr "" -#: gnu/packages/perl.scm:5518 +#: gnu/packages/perl.scm:5574 msgid "Moose role for processing command line options" msgstr "" -#: gnu/packages/perl.scm:5519 +#: gnu/packages/perl.scm:5575 msgid "" "This is a Moose role which provides an alternate constructor\n" "for creating objects using parameters passed in from the command line." msgstr "" -#: gnu/packages/perl.scm:5540 +#: gnu/packages/perl.scm:5596 msgid "Mark overload code symbols as methods" msgstr "" -#: gnu/packages/perl.scm:5541 +#: gnu/packages/perl.scm:5597 msgid "" "MooseX::MarkAsMethods allows one to easily mark certain\n" "functions as Moose methods. This will allow other packages such as\n" @@ -13225,21 +14201,23 @@ msgid "" "overloads will \"just work\"." msgstr "" -#: gnu/packages/perl.scm:5571 +#: gnu/packages/perl.scm:5627 msgid "Code attribute introspection" -msgstr "" +msgstr "Attributintrospektion af kode" -#: gnu/packages/perl.scm:5572 +#: gnu/packages/perl.scm:5628 msgid "" "This module allows code attributes of methods to be\n" "introspected using Moose meta method objects." msgstr "" +"Dette modul tillader at kodeattributter for metoder bliver\n" +"introspektet via Moose-metametodeobjekter." -#: gnu/packages/perl.scm:5598 +#: gnu/packages/perl.scm:5654 msgid "Subclassing of non-Moose classes" msgstr "" -#: gnu/packages/perl.scm:5599 +#: gnu/packages/perl.scm:5655 msgid "" "MooseX::NonMoose allows for easily subclassing non-Moose\n" "classes with Moose, taking care of the details connected with doing this, such\n" @@ -13248,31 +14226,33 @@ msgid "" "BUILD methods are called. It tries to be as non-intrusive as possible." msgstr "" -#: gnu/packages/perl.scm:5628 +#: gnu/packages/perl.scm:5684 msgid "Extension of Params::Validate using Moose's types" -msgstr "" +msgstr "Udvidelse af Params::Validatae der bruger Mooses typer" -#: gnu/packages/perl.scm:5629 +#: gnu/packages/perl.scm:5685 msgid "" "This module fills a gap in Moose by adding method parameter\n" "validation to Moose." msgstr "" +"Dette modul udfylder et hul i Moose ved at tilføje\n" +"parametervalidering af metode til Moose." -#: gnu/packages/perl.scm:5650 +#: gnu/packages/perl.scm:5706 msgid "Apply roles to a related Perl class" -msgstr "" +msgstr "Anvend roller til en relateret Perlklasse" -#: gnu/packages/perl.scm:5651 +#: gnu/packages/perl.scm:5707 msgid "" "This module applies roles to make a subclass instead of\n" "manually setting up a subclass." msgstr "" -#: gnu/packages/perl.scm:5678 +#: gnu/packages/perl.scm:5734 msgid "Moose roles with composition parameters" msgstr "" -#: gnu/packages/perl.scm:5679 +#: gnu/packages/perl.scm:5735 msgid "" "Because Moose roles serve many different masters, they\n" "usually provide only the least common denominator of functionality. To\n" @@ -13282,11 +14262,11 @@ msgid "" "Parameterized roles offer a solution to these (and other) kinds of problems." msgstr "" -#: gnu/packages/perl.scm:5705 +#: gnu/packages/perl.scm:5761 msgid "Roles which support overloading" msgstr "" -#: gnu/packages/perl.scm:5706 +#: gnu/packages/perl.scm:5762 msgid "" "MooseX::Role::WithOverloading allows you to write a\n" "Moose::Role which defines overloaded operators and allows those overload\n" @@ -13294,11 +14274,11 @@ msgid "" "where plain Moose::Roles would lose the overloading." msgstr "" -#: gnu/packages/perl.scm:5728 +#: gnu/packages/perl.scm:5784 msgid "Name your accessors foo() and set_foo()" msgstr "" -#: gnu/packages/perl.scm:5729 +#: gnu/packages/perl.scm:5785 msgid "" "This module does not provide any methods. Simply loading it\n" "changes the default naming policy for the loading class so that accessors are\n" @@ -13306,82 +14286,82 @@ msgid "" "accessor, while set methods are prefixed with \"_set_\"." msgstr "" -#: gnu/packages/perl.scm:5755 +#: gnu/packages/perl.scm:5811 msgid "Strict object constructors for Moose" msgstr "" -#: gnu/packages/perl.scm:5756 +#: gnu/packages/perl.scm:5812 msgid "" "Simply loading this module makes your constructors\n" "\"strict\". If your constructor is called with an attribute init argument\n" "that your class does not declare, then it calls Moose->throw_error()." msgstr "" -#: gnu/packages/perl.scm:5784 +#: gnu/packages/perl.scm:5840 msgid "Trait loading and resolution for Moose" msgstr "" -#: gnu/packages/perl.scm:5785 +#: gnu/packages/perl.scm:5841 msgid "" "Adds support on top of MooseX::Traits for class precedence\n" "search for traits and some extra attributes." msgstr "" -#: gnu/packages/perl.scm:5811 +#: gnu/packages/perl.scm:5867 msgid "Organise your Moose types in libraries" msgstr "" -#: gnu/packages/perl.scm:5812 +#: gnu/packages/perl.scm:5868 msgid "" "This package lets you declare types using short names, but\n" "behind the scenes it namespaces all your type declarations, effectively\n" "prevent name clashes between packages." msgstr "" -#: gnu/packages/perl.scm:5843 +#: gnu/packages/perl.scm:5899 msgid "DateTime related constraints and coercions for Moose" msgstr "" -#: gnu/packages/perl.scm:5844 +#: gnu/packages/perl.scm:5900 msgid "" "This module packages several Moose::Util::TypeConstraints\n" "with coercions, designed to work with the DateTime suite of objects." msgstr "" -#: gnu/packages/perl.scm:5876 +#: gnu/packages/perl.scm:5932 msgid "Extensions to MooseX::Types::DateTime" msgstr "" -#: gnu/packages/perl.scm:5877 +#: gnu/packages/perl.scm:5933 msgid "" "This module builds on MooseX::Types::DateTime to add\n" "additional custom types and coercions. Since it builds on an existing type,\n" "all coercions and constraints are inherited." msgstr "" -#: gnu/packages/perl.scm:5906 +#: gnu/packages/perl.scm:5962 msgid "ClassName type constraints for Moose" msgstr "" -#: gnu/packages/perl.scm:5907 +#: gnu/packages/perl.scm:5963 msgid "" "MooseX::Types::LoadableClass provides a ClassName type\n" "constraint with coercion to load the class." msgstr "" -#: gnu/packages/perl.scm:5933 +#: gnu/packages/perl.scm:5989 msgid "Using Moo and MooX:: packages the most lazy way" msgstr "" -#: gnu/packages/perl.scm:5934 +#: gnu/packages/perl.scm:5990 msgid "Contains the MooX and MooX::Role packages." msgstr "" -#: gnu/packages/perl.scm:5961 +#: gnu/packages/perl.scm:6017 msgid "Giving an easy Moo style way to make command organized CLI apps" msgstr "" -#: gnu/packages/perl.scm:5962 +#: gnu/packages/perl.scm:6018 msgid "" "This package eases the writing of command line utilities,\n" "accepting commands and subcommands and so on. These commands can form a tree,\n" @@ -13390,11 +14370,11 @@ msgid "" "most specific one) is instantiated." msgstr "" -#: gnu/packages/perl.scm:5995 +#: gnu/packages/perl.scm:6051 msgid "Moo eXtension for initializing objects from config file" msgstr "" -#: gnu/packages/perl.scm:5996 +#: gnu/packages/perl.scm:6052 msgid "" "This module is intended to easily load initialization values\n" "for attributes on object construction from an appropriate config file. The\n" @@ -13402,33 +14382,33 @@ msgid "" "@code{MooX::ConfigFromFile} ensures that the role is applied." msgstr "" -#: gnu/packages/perl.scm:6020 +#: gnu/packages/perl.scm:6076 msgid "Moo eXtension for @code{File::ConfigDir}" msgstr "" -#: gnu/packages/perl.scm:6021 +#: gnu/packages/perl.scm:6077 msgid "" "This module is a helper for easily finding configuration\n" "file locations. This information can be used to find a suitable place for\n" "installing configuration files or for finding any piece of settings." msgstr "" -#: gnu/packages/perl.scm:6056 +#: gnu/packages/perl.scm:6112 msgid "NativeTrait-like behavior for Moo" msgstr "" -#: gnu/packages/perl.scm:6058 +#: gnu/packages/perl.scm:6114 msgid "" "@code{MooX::HandlesVia} is an extension of Moo's @code{handles}\n" "attribute functionality. It provides a means of proxying functionality from\n" "an external class to the given atttribute." msgstr "" -#: gnu/packages/perl.scm:6089 +#: gnu/packages/perl.scm:6145 msgid "Easily translate Moose code to Moo" msgstr "" -#: gnu/packages/perl.scm:6091 +#: gnu/packages/perl.scm:6147 msgid "" "MooX::late does the following:\n" "@enumerate\n" @@ -13442,11 +14422,11 @@ msgid "" "@end enumerate" msgstr "" -#: gnu/packages/perl.scm:6146 +#: gnu/packages/perl.scm:6202 msgid "Explicit Options eXtension for Object Class" msgstr "" -#: gnu/packages/perl.scm:6147 +#: gnu/packages/perl.scm:6203 msgid "" "Create a command line tool with your Mo, Moo, Moose objects.\n" "You have an @code{option} keyword to replace the usual @code{has} to\n" @@ -13455,32 +14435,32 @@ msgid "" "generate a command line tool." msgstr "" -#: gnu/packages/perl.scm:6174 +#: gnu/packages/perl.scm:6230 msgid "Moosish types and type builder" msgstr "" -#: gnu/packages/perl.scm:6175 +#: gnu/packages/perl.scm:6231 msgid "" "MooX::Types::MooseLike provides a possibility to build your\n" "own set of Moose-like types. These custom types can then be used to describe\n" "fields in Moo-based classes." msgstr "" -#: gnu/packages/perl.scm:6204 +#: gnu/packages/perl.scm:6260 msgid "Fast Moose-compatible object system for perl5" msgstr "" -#: gnu/packages/perl.scm:6206 +#: gnu/packages/perl.scm:6262 msgid "" "Mouse is a @code{Moose} compatible object system that implements a\n" "subset of the functionality for reduced startup time." msgstr "" -#: gnu/packages/perl.scm:6229 +#: gnu/packages/perl.scm:6285 msgid "Extend attribute interfaces for Mouse" msgstr "Udvid attributgrænseflader for Mouse" -#: gnu/packages/perl.scm:6231 +#: gnu/packages/perl.scm:6287 msgid "" "While @code{Mouse} attributes provide a way to name your accessors,\n" "readers, writers, clearers and predicates, @code{MouseX::NativeTraits}\n" @@ -13488,30 +14468,30 @@ msgid "" "of data." msgstr "" -#: gnu/packages/perl.scm:6251 +#: gnu/packages/perl.scm:6307 msgid "Mozilla's CA cert bundle in PEM format" msgstr "" -#: gnu/packages/perl.scm:6252 +#: gnu/packages/perl.scm:6308 msgid "" "@code{Mozilla::CA} provides a copy of Mozilla's bundle of\n" "Certificate Authority certificates in a form that can be consumed by modules\n" "and libraries based on OpenSSL." msgstr "" -#: gnu/packages/perl.scm:6278 +#: gnu/packages/perl.scm:6334 msgid "Disable multidimensional array emulation" msgstr "" -#: gnu/packages/perl.scm:6280 +#: gnu/packages/perl.scm:6336 msgid "Multidimensional disables multidimensional array emulation." msgstr "" -#: gnu/packages/perl.scm:6297 +#: gnu/packages/perl.scm:6353 msgid "MRO interface compatibility for Perls < 5.9.5" msgstr "" -#: gnu/packages/perl.scm:6298 +#: gnu/packages/perl.scm:6354 msgid "" "The \"mro\" namespace provides several utilities for dealing\n" "with method resolution order and method caching in general in Perl 5.9.5 and\n" @@ -13519,11 +14499,11 @@ msgid "" "Perl (back to 5.6.0)." msgstr "" -#: gnu/packages/perl.scm:6325 +#: gnu/packages/perl.scm:6381 msgid "Keep imports out of your namespace" msgstr "" -#: gnu/packages/perl.scm:6326 +#: gnu/packages/perl.scm:6382 msgid "" "The namespace::autoclean pragma will remove all imported\n" "symbols at the end of the current package's compile cycle. Functions called\n" @@ -13534,11 +14514,11 @@ msgid "" "anything that looks like a method." msgstr "" -#: gnu/packages/perl.scm:6352 +#: gnu/packages/perl.scm:6408 msgid "Keep imports and functions out of your namespace" msgstr "" -#: gnu/packages/perl.scm:6353 +#: gnu/packages/perl.scm:6409 msgid "" "The namespace::clean pragma will remove all previously\n" "declared or imported symbols at the end of the current package's compile\n" @@ -13546,11 +14526,11 @@ msgid "" "name, but they won't show up as methods on your class or instances." msgstr "" -#: gnu/packages/perl.scm:6373 +#: gnu/packages/perl.scm:6429 msgid "Non-blocking system DNS resolver" msgstr "" -#: gnu/packages/perl.scm:6375 +#: gnu/packages/perl.scm:6431 msgid "" "This class provides several methods for host name resolution. It is\n" "designed to be used with event loops. Names are resolved by your system's\n" @@ -13559,11 +14539,11 @@ msgid "" "system threads instead of Perl threads." msgstr "" -#: gnu/packages/perl.scm:6403 +#: gnu/packages/perl.scm:6459 msgid "Internationalizing Domain Names in Applications (IDNA)" msgstr "" -#: gnu/packages/perl.scm:6405 +#: gnu/packages/perl.scm:6461 msgid "" "Internationalized Domain Names (IDNs) use characters drawn from a large\n" "repertoire (Unicode), but IDNA allows the non-ASCII characters to be\n" @@ -13574,11 +14554,11 @@ msgid "" "using whatever IDNA standard is the best choice at the moment." msgstr "" -#: gnu/packages/perl.scm:6431 +#: gnu/packages/perl.scm:6487 msgid "Perl client for Etsy's statsd daemon" msgstr "Perlklient for Etsy's statsd-dæmonen" -#: gnu/packages/perl.scm:6432 +#: gnu/packages/perl.scm:6488 msgid "" "This module implement a UDP client for the statsd statistics\n" "collector daemon in use at Etsy.com." @@ -13586,21 +14566,21 @@ msgstr "" "Dette modul implementerer en UDP-klient for statsd-statistik\n" "indsamlingsdæmonen i brug på Etsy.com." -#: gnu/packages/perl.scm:6450 +#: gnu/packages/perl.scm:6506 msgid "Numeric comparisons" msgstr "Numeriske sammenligninger" -#: gnu/packages/perl.scm:6451 +#: gnu/packages/perl.scm:6507 msgid "" "Number::Compare compiles a simple comparison to an anonymous\n" "subroutine, which you can call with a value to be tested against." msgstr "" -#: gnu/packages/perl.scm:6469 +#: gnu/packages/perl.scm:6525 msgid "Convert numbers to strings with pretty formatting" msgstr "" -#: gnu/packages/perl.scm:6470 +#: gnu/packages/perl.scm:6526 msgid "" "@code{Number::Format} is a library for formatting numbers.\n" "Functions are provided for converting numbers to strings in a variety of ways,\n" @@ -13611,32 +14591,32 @@ msgid "" "the locale information or can be specified by the user." msgstr "" -#: gnu/packages/perl.scm:6494 +#: gnu/packages/perl.scm:6550 msgid "Perl extension defining ranges of numbers" msgstr "Perludvidelse der definerer talintervaller" -#: gnu/packages/perl.scm:6495 +#: gnu/packages/perl.scm:6551 msgid "" "Number::Range is an object-oriented interface to test if a\n" "number exists in a given range, and to be able to manipulate the range." msgstr "" -#: gnu/packages/perl.scm:6515 +#: gnu/packages/perl.scm:6571 msgid "Generate cryptographic signatures for objects" msgstr "Opret kryptografiske underskrifter for objekter" -#: gnu/packages/perl.scm:6516 +#: gnu/packages/perl.scm:6572 msgid "" "Object::Signature is an abstract base class that you can\n" "inherit from in order to allow your objects to generate unique cryptographic\n" "signatures." msgstr "" -#: gnu/packages/perl.scm:6537 +#: gnu/packages/perl.scm:6593 msgid "Read and write OLE storage files" msgstr "" -#: gnu/packages/perl.scm:6538 +#: gnu/packages/perl.scm:6594 msgid "" "This module allows you to read and write\n" "an OLE-Structured file. @dfn{OLE} (Object Linking and Embedding) is a\n" @@ -13644,43 +14624,43 @@ msgid "" "documents within a single file." msgstr "" -#: gnu/packages/perl.scm:6561 +#: gnu/packages/perl.scm:6617 msgid "Anonymous packages" msgstr "Anonyme pakker" -#: gnu/packages/perl.scm:6562 +#: gnu/packages/perl.scm:6618 msgid "" "This module allows for anonymous packages that are\n" "independent of the main namespace and only available through an object\n" "instance, not by name." msgstr "" -#: gnu/packages/perl.scm:6590 +#: gnu/packages/perl.scm:6646 msgid "Manage deprecation warnings for your distribution" msgstr "Håndter forældelsesadvarseler for din distribution" -#: gnu/packages/perl.scm:6591 +#: gnu/packages/perl.scm:6647 msgid "" "This module allows you to manage a set of deprecations for\n" "one or more modules." msgstr "" -#: gnu/packages/perl.scm:6618 +#: gnu/packages/perl.scm:6674 msgid "Routines for manipulating stashes" msgstr "" -#: gnu/packages/perl.scm:6619 +#: gnu/packages/perl.scm:6675 msgid "" "Manipulating stashes (Perl's symbol tables) is occasionally\n" "necessary, but incredibly messy, and easy to get wrong. This module hides all\n" "of that behind a simple API." msgstr "" -#: gnu/packages/perl.scm:6642 +#: gnu/packages/perl.scm:6698 msgid "Faster implementation of the Package::Stash API" msgstr "" -#: gnu/packages/perl.scm:6643 +#: gnu/packages/perl.scm:6699 msgid "" "This is a backend for Package::Stash, which provides the\n" "functionality in a way that's less buggy and much faster. It will be used by\n" @@ -13688,11 +14668,11 @@ msgid "" "compiler." msgstr "" -#: gnu/packages/perl.scm:6663 +#: gnu/packages/perl.scm:6719 msgid "Play with other peoples' lexical variables" msgstr "" -#: gnu/packages/perl.scm:6664 +#: gnu/packages/perl.scm:6720 msgid "" "PadWalker is a module which allows you to inspect (and even\n" "change) lexical variables in any subroutine which called you. It will only\n" @@ -13700,42 +14680,42 @@ msgid "" "is particularly useful for debugging." msgstr "" -#: gnu/packages/perl.scm:6688 +#: gnu/packages/perl.scm:6744 msgid "Simple parallel processing fork manager" msgstr "Simpel prallel behandlingsforgreningshåndtering" -#: gnu/packages/perl.scm:6689 +#: gnu/packages/perl.scm:6745 msgid "" "@code{Parallel::ForkManager} is intended for use in\n" "operations that can be done in parallel where the number of\n" "processes to be forked off should be limited." msgstr "" -#: gnu/packages/perl.scm:6709 +#: gnu/packages/perl.scm:6765 msgid "Simple, compact and correct param-checking functions" msgstr "" -#: gnu/packages/perl.scm:6711 +#: gnu/packages/perl.scm:6767 msgid "" "Params::Util provides a basic set of importable functions that makes\n" "checking parameters easier." msgstr "" -#: gnu/packages/perl.scm:6735 +#: gnu/packages/perl.scm:6791 msgid "Validate method/function parameters" msgstr "" -#: gnu/packages/perl.scm:6736 +#: gnu/packages/perl.scm:6792 msgid "" "The Params::Validate module allows you to validate method or\n" "function call parameters to an arbitrary level of specificity." msgstr "" -#: gnu/packages/perl.scm:6764 +#: gnu/packages/perl.scm:6820 msgid "Build an optimized subroutine parameter validator" msgstr "" -#: gnu/packages/perl.scm:6765 +#: gnu/packages/perl.scm:6821 msgid "" "This module creates a customized, highly efficient\n" "parameter checking subroutine. It can handle named or positional\n" @@ -13744,11 +14724,11 @@ msgid "" "defaults, optional parameters, and extra \"slurpy\" parameters." msgstr "" -#: gnu/packages/perl.scm:6786 +#: gnu/packages/perl.scm:6842 msgid "Create and manipulate PAR distributions" msgstr "Opret og manipuler PAR-distributioner" -#: gnu/packages/perl.scm:6787 +#: gnu/packages/perl.scm:6843 msgid "" "PAR::Dist is a toolkit to create and manipulate PAR\n" "distributions." @@ -13756,27 +14736,27 @@ msgstr "" "PAR::Dist er et værktøjssæt til at oprette og manipulere PAR-\n" "distributioner." -#: gnu/packages/perl.scm:6806 +#: gnu/packages/perl.scm:6862 msgid "" "Allows you to both load one or more modules, while setting\n" "up inheritance from those modules at the same time." msgstr "" -#: gnu/packages/perl.scm:6825 +#: gnu/packages/perl.scm:6881 msgid "Path specification manipulation" msgstr "" -#: gnu/packages/perl.scm:6826 +#: gnu/packages/perl.scm:6882 msgid "" "Path::Class is a module for manipulation of file and\n" "directory specifications in a cross-platform manner." msgstr "" -#: gnu/packages/perl.scm:6855 +#: gnu/packages/perl.scm:6911 msgid "Tools for working with directory and file names" msgstr "Værktøjer for arbejde med mapper og filnavne" -#: gnu/packages/perl.scm:6856 +#: gnu/packages/perl.scm:6912 msgid "" "This package provides functions to work with directory and\n" "file names." @@ -13784,11 +14764,11 @@ msgstr "" "Denne pakke tilbyder funktioner til arbejde med mappe- og\n" "filnavne." -#: gnu/packages/perl.scm:6880 +#: gnu/packages/perl.scm:6936 msgid "File path utility" msgstr "Filstiredskab" -#: gnu/packages/perl.scm:6881 +#: gnu/packages/perl.scm:6937 msgid "" "This module provides a small, fast utility for working\n" "with file paths." @@ -13796,22 +14776,22 @@ msgstr "" "Dette modul tilbyder et lille, hurtigt redskab til arbejdet\n" "med filstier." -#: gnu/packages/perl.scm:6902 +#: gnu/packages/perl.scm:6958 msgid "Fast and correct UTF-8 IO" msgstr "Hurtig og korrekt UTF-8 IO" -#: gnu/packages/perl.scm:6903 +#: gnu/packages/perl.scm:6959 msgid "" "@code{PerlIO::utf8_strict} provides a fast and correct UTF-8\n" "PerlIO layer. Unlike Perl's default @code{:utf8} layer it checks the input\n" "for correctness." msgstr "" -#: gnu/packages/perl.scm:6926 +#: gnu/packages/perl.scm:6982 msgid "Acmeist PEG Parser Framework" msgstr "" -#: gnu/packages/perl.scm:6927 +#: gnu/packages/perl.scm:6983 msgid "" "Pegex is an Acmeist parser framework. It allows you to easily\n" "create parsers that will work equivalently in lots of programming languages.\n" @@ -13821,32 +14801,32 @@ msgid "" "available." msgstr "" -#: gnu/packages/perl.scm:6951 +#: gnu/packages/perl.scm:7007 msgid "Check for comprehensive documentation of a module" msgstr "" -#: gnu/packages/perl.scm:6952 +#: gnu/packages/perl.scm:7008 msgid "" "This module provides a mechanism for determining if the pod\n" "for a given module is comprehensive." msgstr "" -#: gnu/packages/perl.scm:6969 +#: gnu/packages/perl.scm:7025 msgid "Parsing library for text in Pod format" msgstr "" -#: gnu/packages/perl.scm:6970 +#: gnu/packages/perl.scm:7026 msgid "" "@code{Pod::Simple} is a Perl library for parsing text in\n" "the @dfn{Pod} (plain old documentation) markup language that is typically\n" "used for writing documentation for Perl and for Perl modules." msgstr "" -#: gnu/packages/perl.scm:6991 +#: gnu/packages/perl.scm:7047 msgid "GNU C library compatible strftime for loggers and servers" msgstr "" -#: gnu/packages/perl.scm:6992 +#: gnu/packages/perl.scm:7048 msgid "" "POSIX::strftime::Compiler provides GNU C library compatible\n" "strftime(3). But this module is not affected by the system locale. This\n" @@ -13854,32 +14834,32 @@ msgid "" "applications." msgstr "" -#: gnu/packages/perl.scm:7010 +#: gnu/packages/perl.scm:7066 msgid "Information about the currently running perl" msgstr "" -#: gnu/packages/perl.scm:7012 +#: gnu/packages/perl.scm:7068 msgid "" "Probe::Perl provides methods for obtaining information about the\n" "currently running perl interpreter. It originally began life as code in the\n" "Module::Build project, but has been externalized here for general use." msgstr "" -#: gnu/packages/perl.scm:7040 +#: gnu/packages/perl.scm:7095 msgid "Interface to external editor from Perl" msgstr "" -#: gnu/packages/perl.scm:7041 +#: gnu/packages/perl.scm:7096 msgid "" "This module provides the ability to supply some text to an\n" "external text editor, have it edited by the user, and retrieve the results." msgstr "" -#: gnu/packages/perl.scm:7060 +#: gnu/packages/perl.scm:7115 msgid "Create read-only scalars, arrays, hashes" msgstr "" -#: gnu/packages/perl.scm:7061 +#: gnu/packages/perl.scm:7116 msgid "" "This module provides a facility for creating non-modifiable\n" "variables in Perl. This is useful for configuration files, headers, etc. It\n" @@ -13887,11 +14867,11 @@ msgid "" "variables that should not be changed." msgstr "" -#: gnu/packages/perl.scm:7081 +#: gnu/packages/perl.scm:7136 msgid "XS implementation for Ref::Util" msgstr "" -#: gnu/packages/perl.scm:7082 +#: gnu/packages/perl.scm:7137 msgid "" "@code{Ref::Util::XS} is the XS implementation of\n" "@code{Ref::Util}, which provides several functions to help identify references\n" @@ -13899,11 +14879,11 @@ msgid "" "of @code{ref}." msgstr "" -#: gnu/packages/perl.scm:7100 +#: gnu/packages/perl.scm:7155 msgid "Provide commonly requested regular expressions" msgstr "" -#: gnu/packages/perl.scm:7102 +#: gnu/packages/perl.scm:7157 msgid "" "This module exports a single hash (`%RE') that stores or generates\n" "commonly needed regular expressions. Patterns currently provided include:\n" @@ -13913,11 +14893,11 @@ msgid "" "codes." msgstr "" -#: gnu/packages/perl.scm:7127 +#: gnu/packages/perl.scm:7181 msgid "Selection of general-utility regexp subroutines" -msgstr "" +msgstr "Udvalg af generelle redskaber til regulære udtryks underrutiner" -#: gnu/packages/perl.scm:7128 +#: gnu/packages/perl.scm:7182 msgid "" "This package provides a selection of regular expression\n" "subroutines including @code{is_regexp}, @code{regexp_seen_evals},\n" @@ -13925,29 +14905,29 @@ msgid "" "and @code{deserialize_regexp}." msgstr "" -#: gnu/packages/perl.scm:7153 +#: gnu/packages/perl.scm:7207 msgid "Roles, as a slice of Moose" msgstr "" -#: gnu/packages/perl.scm:7154 +#: gnu/packages/perl.scm:7208 msgid "Role::Tiny is a minimalist role composition tool." msgstr "" -#: gnu/packages/perl.scm:7185 +#: gnu/packages/perl.scm:7239 msgid "Call isa, can, does, and DOES safely" msgstr "" -#: gnu/packages/perl.scm:7186 +#: gnu/packages/perl.scm:7240 msgid "" "This module allows you to call isa, can, does, and DOES\n" "safely on things that may not be objects." msgstr "" -#: gnu/packages/perl.scm:7204 +#: gnu/packages/perl.scm:7258 msgid "Lexically-scoped resource management" msgstr "" -#: gnu/packages/perl.scm:7205 +#: gnu/packages/perl.scm:7259 msgid "" "This module provides a convenient way to perform cleanup or\n" "other forms of resource management at the end of a scope. It is particularly\n" @@ -13958,39 +14938,39 @@ msgid "" "collector." msgstr "" -#: gnu/packages/perl.scm:7228 +#: gnu/packages/perl.scm:7282 msgid "Infinite sets" msgstr "" -#: gnu/packages/perl.scm:7229 +#: gnu/packages/perl.scm:7283 msgid "Set::Infinite is a set theory module for infinite sets." msgstr "" -#: gnu/packages/perl.scm:7246 +#: gnu/packages/perl.scm:7300 msgid "Manage sets of integers" -msgstr "" +msgstr "Håndter sæt af heltal" -#: gnu/packages/perl.scm:7247 +#: gnu/packages/perl.scm:7301 msgid "" "@code{Set::IntSpan} manages sets of integers. It is\n" "optimized for sets that have long runs of consecutive integers." msgstr "" -#: gnu/packages/perl.scm:7268 +#: gnu/packages/perl.scm:7322 msgid "Unordered collections of Perl Objects" -msgstr "" +msgstr "Rodede samlinger af Perlobjekter" -#: gnu/packages/perl.scm:7269 +#: gnu/packages/perl.scm:7323 msgid "" "Set::Object provides efficient sets, unordered collections\n" "of Perl objects without duplicates for scalars and references." msgstr "" -#: gnu/packages/perl.scm:7287 +#: gnu/packages/perl.scm:7341 msgid "Set operations for Perl" msgstr "" -#: gnu/packages/perl.scm:7288 +#: gnu/packages/perl.scm:7342 msgid "" "The first priority of Set::Scalar is to be a convenient\n" "interface to sets (as in: unordered collections of Perl scalars). While not\n" @@ -13998,21 +14978,21 @@ msgid "" "compact." msgstr "" -#: gnu/packages/perl.scm:7308 +#: gnu/packages/perl.scm:7362 msgid "Sort arrays by one or multiple calculated keys" msgstr "" -#: gnu/packages/perl.scm:7309 +#: gnu/packages/perl.scm:7363 msgid "" "This Perl module provides various functions to quickly sort\n" "arrays by one or multiple calculated keys." msgstr "" -#: gnu/packages/perl.scm:7327 +#: gnu/packages/perl.scm:7381 msgid "Sort lexically, but sort numeral parts numerically" msgstr "" -#: gnu/packages/perl.scm:7328 +#: gnu/packages/perl.scm:7382 msgid "" "This module exports two functions, @code{nsort} and\n" "@code{ncmp}; they are used in implementing a \"natural sorting\" algorithm.\n" @@ -14020,11 +15000,11 @@ msgid "" "word-characters are compared lexically." msgstr "" -#: gnu/packages/perl.scm:7356 +#: gnu/packages/perl.scm:7410 msgid "Classes for representing type constraints and coercion" msgstr "" -#: gnu/packages/perl.scm:7357 +#: gnu/packages/perl.scm:7411 msgid "" "The Specio distribution provides classes for representing type\n" "constraints and coercion, along with syntax sugar for declaring them. Note that\n" @@ -14035,11 +15015,11 @@ msgid "" "coerce values to that type." msgstr "" -#: gnu/packages/perl.scm:7380 +#: gnu/packages/perl.scm:7434 msgid "Spiffy Perl Interface Framework For You" msgstr "" -#: gnu/packages/perl.scm:7381 +#: gnu/packages/perl.scm:7435 msgid "" "Spiffy is a framework and methodology for doing object\n" "oriented (OO) programming in Perl. Spiffy combines the best parts of\n" @@ -14049,21 +15029,21 @@ msgid "" "other OO languages like Python, Ruby, Java and Perl 6." msgstr "" -#: gnu/packages/perl.scm:7405 +#: gnu/packages/perl.scm:7459 msgid "Collection of very basic statistics modules" -msgstr "" +msgstr "Samling af meget grundlæggende statistikmoduler" -#: gnu/packages/perl.scm:7406 +#: gnu/packages/perl.scm:7460 msgid "" "This package provides basic statistics functions like\n" "@code{median()}, @code{mean()}, @code{variance()} and @code{stddev()}." msgstr "" -#: gnu/packages/perl.scm:7424 +#: gnu/packages/perl.scm:7478 msgid "Temporary buffer to save bytes" msgstr "" -#: gnu/packages/perl.scm:7425 +#: gnu/packages/perl.scm:7479 msgid "" "Stream::Buffered is a buffer class to store arbitrary length\n" "of byte strings and then get a seekable filehandle once everything is\n" @@ -14071,31 +15051,31 @@ msgid "" "on the length of the size." msgstr "" -#: gnu/packages/perl.scm:7445 +#: gnu/packages/perl.scm:7499 msgid "Turn on strict and make all warnings fatal" msgstr "" -#: gnu/packages/perl.scm:7446 +#: gnu/packages/perl.scm:7500 msgid "" "Strictures turns on strict and make all warnings fatal when\n" "run from within a source-controlled directory." msgstr "" -#: gnu/packages/perl.scm:7488 +#: gnu/packages/perl.scm:7542 msgid "Camelcase and de-camelcase" msgstr "" -#: gnu/packages/perl.scm:7489 +#: gnu/packages/perl.scm:7543 msgid "" "This module may be used to convert from under_score text to\n" "CamelCase and back again." msgstr "" -#: gnu/packages/perl.scm:7508 +#: gnu/packages/perl.scm:7562 msgid "Backslash escapes, quoted phrase, word elision, etc." msgstr "" -#: gnu/packages/perl.scm:7509 +#: gnu/packages/perl.scm:7563 msgid "" "This module provides a flexible calling interface to some\n" "frequently-performed string conversion functions, including applying and\n" @@ -14104,42 +15084,42 @@ msgid "" "removing double-quotes, and truncating to fit within a desired length." msgstr "" -#: gnu/packages/perl.scm:7531 +#: gnu/packages/perl.scm:7585 msgid "Rewrite strings based on a set of known prefixes" msgstr "" -#: gnu/packages/perl.scm:7532 +#: gnu/packages/perl.scm:7586 msgid "" "This module allows you to rewrite strings based on a set of\n" "known prefixes." msgstr "" -#: gnu/packages/perl.scm:7551 +#: gnu/packages/perl.scm:7605 msgid "String printing alternatives to printf" msgstr "" -#: gnu/packages/perl.scm:7553 +#: gnu/packages/perl.scm:7607 msgid "" "This module inserts values into (translated) strings. It provides\n" "@code{printf} and @code{sprintf} alternatives via both an object-oriented and\n" "a functional interface." msgstr "" -#: gnu/packages/perl.scm:7576 +#: gnu/packages/perl.scm:7630 msgid "Sophisticated exporter for custom-built routines" msgstr "" -#: gnu/packages/perl.scm:7578 +#: gnu/packages/perl.scm:7632 msgid "" "Sub::Exporter provides a sophisticated alternative to Exporter.pm for\n" "custom-built routines." msgstr "" -#: gnu/packages/perl.scm:7597 +#: gnu/packages/perl.scm:7651 msgid "Only use Sub::Exporter if you need it" msgstr "" -#: gnu/packages/perl.scm:7598 +#: gnu/packages/perl.scm:7652 msgid "" "Sub::Exporter is an incredibly powerful module, but with\n" "that power comes great responsibility, as well as some runtime penalties.\n" @@ -14149,21 +15129,21 @@ msgid "" "renaming exports, if they try to use them." msgstr "" -#: gnu/packages/perl.scm:7620 +#: gnu/packages/perl.scm:7674 msgid "Retrieve names of code references" -msgstr "" +msgstr "Hent navne på kodereferencer" -#: gnu/packages/perl.scm:7621 +#: gnu/packages/perl.scm:7675 msgid "" "Sub::Identify allows you to retrieve the real name of code\n" "references." msgstr "" -#: gnu/packages/perl.scm:7641 +#: gnu/packages/perl.scm:7695 msgid "Tool to inspect subroutines" msgstr "Værktøj til at inspicere underrutiner" -#: gnu/packages/perl.scm:7642 +#: gnu/packages/perl.scm:7696 msgid "" "This package provides tools for inspecting subroutines\n" "in Perl." @@ -14171,54 +15151,54 @@ msgstr "" "Denne pakke tilbyder værktøjer til at inspicere underrutiner\n" "i Perl." -#: gnu/packages/perl.scm:7661 +#: gnu/packages/perl.scm:7715 msgid "Install subroutines into packages easily" msgstr "" -#: gnu/packages/perl.scm:7663 +#: gnu/packages/perl.scm:7717 msgid "" "Sub::Install makes it easy to install subroutines into packages without\n" "the unsightly mess of C or typeglobs lying about where just anyone\n" "can see them." msgstr "" -#: gnu/packages/perl.scm:7684 +#: gnu/packages/perl.scm:7738 msgid "(Re)name a sub" msgstr "" -#: gnu/packages/perl.scm:7685 +#: gnu/packages/perl.scm:7739 msgid "" "Assigns a new name to referenced sub. If package\n" "specification is omitted in the name, then the current package is used. The\n" "return value is the sub." msgstr "" -#: gnu/packages/perl.scm:7709 +#: gnu/packages/perl.scm:7763 msgid "Efficient generation of subroutines via string eval" -msgstr "" +msgstr "Effektiv oprettelse af underrutiner via strengevaluering" -#: gnu/packages/perl.scm:7710 +#: gnu/packages/perl.scm:7764 msgid "" "Sub::Quote provides an efficient generation of subroutines\n" "via string eval." msgstr "" -#: gnu/packages/perl.scm:7728 +#: gnu/packages/perl.scm:7782 msgid "Apparently run a function in a higher stack frame" msgstr "" -#: gnu/packages/perl.scm:7729 +#: gnu/packages/perl.scm:7783 msgid "" "Like Tcl's uplevel() function, but not quite so dangerous.\n" "The idea is just to fool caller(). All the really naughty bits of Tcl's\n" "uplevel() are avoided." msgstr "" -#: gnu/packages/perl.scm:7751 +#: gnu/packages/perl.scm:7805 msgid "Control superclass method dispatching" msgstr "" -#: gnu/packages/perl.scm:7753 +#: gnu/packages/perl.scm:7807 msgid "" "When subclassing a class, you may occasionally want to dispatch control to\n" "the superclass---at least conditionally and temporarily. This module provides\n" @@ -14227,11 +15207,11 @@ msgid "" "support for run-time mix-ins and roles." msgstr "" -#: gnu/packages/perl.scm:7774 +#: gnu/packages/perl.scm:7828 msgid "Perl extension for generating SVG documents" msgstr "" -#: gnu/packages/perl.scm:7775 +#: gnu/packages/perl.scm:7829 msgid "" "SVG is a Perl module which generates a nested data structure\n" "containing the DOM representation of an SVG (Scalable Vector Graphics) image.\n" @@ -14240,42 +15220,42 @@ msgid "" "animation content." msgstr "" -#: gnu/packages/perl.scm:7796 +#: gnu/packages/perl.scm:7850 msgid "Switch statement for Perl" msgstr "Skift udtryk for Perl" -#: gnu/packages/perl.scm:7797 +#: gnu/packages/perl.scm:7851 msgid "" "Switch is a Perl module which implements a generalized case\n" "mechanism. The module augments the standard Perl syntax with two new\n" "statements: @code{switch} and @code{case}." msgstr "" -#: gnu/packages/perl.scm:7843 +#: gnu/packages/perl.scm:7898 msgid "Perl extension for getting CPU information" msgstr "Perludvidelse til at indhente cpu-information" -#: gnu/packages/perl.scm:7845 +#: gnu/packages/perl.scm:7900 msgid "" "Sys::CPU is a module for counting the number of CPUs on a system, and\n" "determining their type and clock speed." msgstr "" -#: gnu/packages/perl.scm:7866 +#: gnu/packages/perl.scm:7920 msgid "Get full hostname in Perl" msgstr "" -#: gnu/packages/perl.scm:7867 +#: gnu/packages/perl.scm:7921 msgid "" "Sys::Hostname::Long tries very hard to get the full hostname\n" "of a system." msgstr "" -#: gnu/packages/perl.scm:7894 +#: gnu/packages/perl.scm:7948 msgid "Ensure that a platform has weaken support" msgstr "" -#: gnu/packages/perl.scm:7895 +#: gnu/packages/perl.scm:7949 msgid "" "One recurring problem in modules that use Scalar::Util's\n" "weaken function is that it is not present in the pure-perl variant. If\n" @@ -14285,11 +15265,11 @@ msgid "" "error encouraging the user to seek support." msgstr "" -#: gnu/packages/perl.scm:7920 +#: gnu/packages/perl.scm:7974 msgid "Template processing system for Perl" msgstr "" -#: gnu/packages/perl.scm:7921 +#: gnu/packages/perl.scm:7975 msgid "" "The Template Toolkit is a collection of modules which\n" "implement an extensible template processing system. It was originally\n" @@ -14298,42 +15278,42 @@ msgid "" "documents: HTML, XML, POD, PostScript, LaTeX, and so on." msgstr "" -#: gnu/packages/perl.scm:7944 +#: gnu/packages/perl.scm:7998 msgid "Profiling for Template Toolkit" msgstr "" -#: gnu/packages/perl.scm:7945 +#: gnu/packages/perl.scm:7999 msgid "" "Template::Timer provides inline profiling of the template\n" "processing in Perl code." msgstr "" -#: gnu/packages/perl.scm:7965 +#: gnu/packages/perl.scm:8019 msgid "Detect encoding of the current terminal" msgstr "" -#: gnu/packages/perl.scm:7966 +#: gnu/packages/perl.scm:8020 msgid "" "Term::Encoding is a simple module to detect the encoding of\n" "the current terminal expects in various ways." msgstr "" -#: gnu/packages/perl.scm:7990 +#: gnu/packages/perl.scm:8044 msgid "Progress meter on a standard terminal" msgstr "" -#: gnu/packages/perl.scm:7991 +#: gnu/packages/perl.scm:8045 msgid "" "Term::ProgressBar provides a simple progress bar on the\n" "terminal, to let the user know that something is happening, roughly how much\n" "stuff has been done, and maybe an estimate at how long remains." msgstr "" -#: gnu/packages/perl.scm:8014 +#: gnu/packages/perl.scm:8068 msgid "Progress meter if run interactively" msgstr "" -#: gnu/packages/perl.scm:8015 +#: gnu/packages/perl.scm:8069 msgid "" "Term::ProgressBar is a wonderful module for showing progress\n" "bars on the terminal. This module acts very much like that module when it is\n" @@ -14341,21 +15321,21 @@ msgid "" "a cron job) then it does not show the progress bar." msgstr "" -#: gnu/packages/perl.scm:8037 +#: gnu/packages/perl.scm:8091 msgid "Simple progress bars" msgstr "" -#: gnu/packages/perl.scm:8038 +#: gnu/packages/perl.scm:8092 msgid "" "Term::ProgressBar::Simple tells you how much work has been\n" "done, how much is left to do, and estimate how long it will take." msgstr "" -#: gnu/packages/perl.scm:8056 +#: gnu/packages/perl.scm:8110 msgid "Simple terminal control" msgstr "Simpel terminalkontrol" -#: gnu/packages/perl.scm:8057 +#: gnu/packages/perl.scm:8111 msgid "" "This module, ReadKey, provides ioctl control for terminals\n" "so the input modes can be changed (thus allowing reads of a single character\n" @@ -14364,11 +15344,11 @@ msgid "" "screen size, and retrieval/modification of the control characters." msgstr "" -#: gnu/packages/perl.scm:8082 +#: gnu/packages/perl.scm:8136 msgid "Retrieve terminal size" msgstr "" -#: gnu/packages/perl.scm:8083 +#: gnu/packages/perl.scm:8137 msgid "" "This is a unified interface to retrieve terminal size. It\n" "loads one module of a list of known alternatives, each implementing some way\n" @@ -14376,62 +15356,62 @@ msgid "" "the job on behalf of @code{Term::Size::Any}." msgstr "" -#: gnu/packages/perl.scm:8103 +#: gnu/packages/perl.scm:8157 msgid "Perl extension for retrieving terminal size (Perl version)" msgstr "Perludvidelse til at indhente terminalstørrelse (Perlversion)" -#: gnu/packages/perl.scm:8104 +#: gnu/packages/perl.scm:8158 msgid "" "This is yet another implementation of @code{Term::Size}.\n" "Now in pure Perl, with the exception of a C probe run at build time." msgstr "" -#: gnu/packages/perl.scm:8124 +#: gnu/packages/perl.scm:8178 msgid "Format a header and rows into a table" msgstr "" -#: gnu/packages/perl.scm:8125 +#: gnu/packages/perl.scm:8179 msgid "" "This module is able to generically format rows of data\n" "into tables." msgstr "" -#: gnu/packages/perl.scm:8144 +#: gnu/packages/perl.scm:8198 msgid "Align text" msgstr "Juster tekst" -#: gnu/packages/perl.scm:8145 +#: gnu/packages/perl.scm:8199 msgid "" "Text::Aligner exports a single function, align(), which is\n" "used to justify strings to various alignment styles." msgstr "" -#: gnu/packages/perl.scm:8163 +#: gnu/packages/perl.scm:8217 msgid "Extract delimited text sequences from strings" msgstr "" -#: gnu/packages/perl.scm:8164 +#: gnu/packages/perl.scm:8218 msgid "" "The Text::Balanced module can be used to extract delimited\n" "text sequences from strings." msgstr "" -#: gnu/packages/perl.scm:8182 +#: gnu/packages/perl.scm:8236 msgid "Manipulate comma-separated values" msgstr "" -#: gnu/packages/perl.scm:8183 +#: gnu/packages/perl.scm:8237 msgid "" "Text::CSV provides facilities for the composition and\n" "decomposition of comma-separated values. An instance of the Text::CSV class\n" "can combine fields into a CSV string and parse a CSV string into fields." msgstr "" -#: gnu/packages/perl.scm:8202 +#: gnu/packages/perl.scm:8256 msgid "Rountines for manipulating CSV files" msgstr "" -#: gnu/packages/perl.scm:8203 +#: gnu/packages/perl.scm:8257 msgid "" "@code{Text::CSV_XS} provides facilities for the composition\n" "and decomposition of comma-separated values. An instance of the\n" @@ -14441,11 +15421,11 @@ msgid "" "and escapes." msgstr "" -#: gnu/packages/perl.scm:8227 +#: gnu/packages/perl.scm:8281 msgid "Perform diffs on files and record sets" msgstr "" -#: gnu/packages/perl.scm:8228 +#: gnu/packages/perl.scm:8282 msgid "" "Text::Diff provides a basic set of services akin to the GNU\n" "diff utility. It is not anywhere near as feature complete as GNU diff, but it\n" @@ -14454,44 +15434,44 @@ msgid "" "generally slower on larger files." msgstr "" -#: gnu/packages/perl.scm:8253 +#: gnu/packages/perl.scm:8307 msgid "Various subroutines to format text" msgstr "" -#: gnu/packages/perl.scm:8254 +#: gnu/packages/perl.scm:8308 msgid "" "This package provides functions to format text in various\n" "ways like centering, paragraphing, and converting tabs to spaces and spaces\n" "to tabs." msgstr "" -#: gnu/packages/perl.scm:8274 +#: gnu/packages/perl.scm:8328 msgid "Match globbing patterns against text" msgstr "" -#: gnu/packages/perl.scm:8275 +#: gnu/packages/perl.scm:8329 msgid "" "Text::Glob implements glob(3) style matching that can be\n" "used to match against text, rather than fetching names from a file system. If\n" "you want to do full file globbing use the File::Glob module instead." msgstr "" -#: gnu/packages/perl.scm:8298 +#: gnu/packages/perl.scm:8352 msgid "Fast, middleweight template engine" msgstr "" -#: gnu/packages/perl.scm:8300 +#: gnu/packages/perl.scm:8354 msgid "" "Text::NeatTemplate provides a simple, middleweight but fast\n" "template engine, for when you need speed rather than complex features,\n" "yet need more features than simple variable substitution." msgstr "" -#: gnu/packages/perl.scm:8319 +#: gnu/packages/perl.scm:8373 msgid "Convert between Roman and Arabic algorisms" msgstr "" -#: gnu/packages/perl.scm:8320 +#: gnu/packages/perl.scm:8374 msgid "" "This package provides functions to convert between Roman and\n" "Arabic algorisms. It supports both conventional Roman algorisms (which range\n" @@ -14499,27 +15479,27 @@ msgid "" "algorism to indicate multiplication by 1000." msgstr "" -#: gnu/packages/perl.scm:8340 +#: gnu/packages/perl.scm:8394 msgid "Simple ASCII tables" msgstr "" -#: gnu/packages/perl.scm:8341 +#: gnu/packages/perl.scm:8395 msgid "Text::SimpleTable draws simple ASCII tables." msgstr "" -#: gnu/packages/perl.scm:8362 +#: gnu/packages/perl.scm:8416 msgid "Organize Data in Tables" msgstr "" -#: gnu/packages/perl.scm:8363 +#: gnu/packages/perl.scm:8417 msgid "Text::Table renders plaintext tables." msgstr "" -#: gnu/packages/perl.scm:8384 +#: gnu/packages/perl.scm:8438 msgid "Expand template text with embedded Perl" msgstr "" -#: gnu/packages/perl.scm:8386 +#: gnu/packages/perl.scm:8440 msgid "" "This is a library for generating letters, building HTML pages, or\n" "filling in templates generally. A template is a piece of text that has little\n" @@ -14527,11 +15507,11 @@ msgid "" "evaluate the little programs and replace them with their values." msgstr "" -#: gnu/packages/perl.scm:8406 +#: gnu/packages/perl.scm:8460 msgid "Provide plain ASCII transliterations of Unicode text" msgstr "" -#: gnu/packages/perl.scm:8407 +#: gnu/packages/perl.scm:8461 msgid "" "Text::Unidecode provides a function, unidecode(...) that\n" "takes Unicode data and tries to represent it in US-ASCII characters (i.e., the\n" @@ -14541,29 +15521,29 @@ msgid "" "system." msgstr "" -#: gnu/packages/perl.scm:8428 +#: gnu/packages/perl.scm:8482 msgid "Perl interpreter-based threads" msgstr "" -#: gnu/packages/perl.scm:8429 +#: gnu/packages/perl.scm:8483 msgid "This module exposes interpreter threads to the Perl level." msgstr "" -#: gnu/packages/perl.scm:8452 +#: gnu/packages/perl.scm:8506 msgid "Role for classes that can be thrown" msgstr "" -#: gnu/packages/perl.scm:8453 +#: gnu/packages/perl.scm:8507 msgid "" "Throwable is a role for classes that are meant to be thrown\n" "as exceptions to standard program flow." msgstr "" -#: gnu/packages/perl.scm:8470 +#: gnu/packages/perl.scm:8524 msgid "Perl script tidier" msgstr "" -#: gnu/packages/perl.scm:8471 +#: gnu/packages/perl.scm:8525 msgid "" "This package contains a Perl script which indents and\n" "reformats Perl scripts to make them easier to read. The formatting can be\n" @@ -14571,21 +15551,21 @@ msgid "" "approximately follow the suggestions in the Perl Style Guide." msgstr "" -#: gnu/packages/perl.scm:8491 +#: gnu/packages/perl.scm:8545 msgid "Cycle through a list of values" msgstr "" -#: gnu/packages/perl.scm:8492 +#: gnu/packages/perl.scm:8546 msgid "" "You use @code{Tie::Cycle} to go through a list over and over\n" "again. Once you get to the end of the list, you go back to the beginning." msgstr "" -#: gnu/packages/perl.scm:8511 +#: gnu/packages/perl.scm:8565 msgid "Ordered associative arrays for Perl" msgstr "" -#: gnu/packages/perl.scm:8512 +#: gnu/packages/perl.scm:8566 msgid "" "This Perl module implements Perl hashes that preserve the\n" "order in which the hash elements were added. The order is not affected when\n" @@ -14594,53 +15574,53 @@ msgid "" "operations can also be performed on the IxHash." msgstr "" -#: gnu/packages/perl.scm:8535 +#: gnu/packages/perl.scm:8589 msgid "Tie to an existing Perl object" msgstr "" -#: gnu/packages/perl.scm:8536 +#: gnu/packages/perl.scm:8590 msgid "" "This class provides a tie constructor that returns the\n" "object it was given as it's first argument. This way side effects of calling\n" "$object->TIEHASH are avoided." msgstr "" -#: gnu/packages/perl.scm:8559 +#: gnu/packages/perl.scm:8613 msgid "English expression of durations" msgstr "" -#: gnu/packages/perl.scm:8560 +#: gnu/packages/perl.scm:8614 msgid "" "This module provides functions for expressing durations in\n" "rounded or exact terms." msgstr "" -#: gnu/packages/perl.scm:8582 +#: gnu/packages/perl.scm:8636 msgid "Parse time duration strings" msgstr "" -#: gnu/packages/perl.scm:8583 +#: gnu/packages/perl.scm:8637 msgid "" "Time::Duration::Parse is a module to parse human readable\n" "duration strings like \"2 minutes\" and \"3 seconds\" to seconds." msgstr "" -#: gnu/packages/perl.scm:8601 +#: gnu/packages/perl.scm:8655 msgid "High resolution alarm, sleep, gettimeofday, interval timers" msgstr "" -#: gnu/packages/perl.scm:8602 +#: gnu/packages/perl.scm:8656 msgid "" "This package implements @code{usleep}, @code{ualarm}, and\n" "@code{gettimeofday} for Perl, as well as wrappers to implement @code{time},\n" "@code{sleep}, and @code{alarm} that know about non-integral seconds." msgstr "" -#: gnu/packages/perl.scm:8621 +#: gnu/packages/perl.scm:8675 msgid "Efficiently compute time from local and GMT time" msgstr "" -#: gnu/packages/perl.scm:8622 +#: gnu/packages/perl.scm:8676 msgid "" "This module provides functions that are the inverse of\n" "built-in perl functions localtime() and gmtime(). They accept a date as a\n" @@ -14648,11 +15628,11 @@ msgid "" "the system epoch." msgstr "" -#: gnu/packages/perl.scm:8642 +#: gnu/packages/perl.scm:8696 msgid "Object-Oriented time objects" msgstr "" -#: gnu/packages/perl.scm:8644 +#: gnu/packages/perl.scm:8698 msgid "" "This module replaces the standard @code{localtime} and @code{gmtime}\n" "functions with implementations that return objects. It does so in a\n" @@ -14660,62 +15640,62 @@ msgid "" "still work as expected." msgstr "" -#: gnu/packages/perl.scm:8664 +#: gnu/packages/perl.scm:8718 msgid "Date parsing/formatting subroutines" msgstr "" -#: gnu/packages/perl.scm:8665 +#: gnu/packages/perl.scm:8719 msgid "" "This module provides routines for parsing date string into\n" "time values and formatting dates into ASCII strings." msgstr "" -#: gnu/packages/perl.scm:8687 +#: gnu/packages/perl.scm:8741 msgid "Shift and scale time" msgstr "" -#: gnu/packages/perl.scm:8688 +#: gnu/packages/perl.scm:8742 msgid "" "This module allows you to speed up your sleep(), alarm(),\n" "and time() calls." msgstr "" -#: gnu/packages/perl.scm:8711 +#: gnu/packages/perl.scm:8765 msgid "Simple tree object" msgstr "" -#: gnu/packages/perl.scm:8712 +#: gnu/packages/perl.scm:8766 msgid "" "This module in a fully object-oriented implementation of a\n" "simple n-ary tree." msgstr "" -#: gnu/packages/perl.scm:8736 +#: gnu/packages/perl.scm:8790 msgid "Factory object for dispensing Visitor objects" msgstr "" -#: gnu/packages/perl.scm:8737 +#: gnu/packages/perl.scm:8791 msgid "" "This module is a factory for dispensing\n" "Tree::Simple::Visitor::* objects." msgstr "" -#: gnu/packages/perl.scm:8755 +#: gnu/packages/perl.scm:8809 msgid "Minimal try/catch with proper preservation of $@@" msgstr "" -#: gnu/packages/perl.scm:8756 +#: gnu/packages/perl.scm:8810 msgid "" "This module provides bare bones try/catch/finally statements\n" "that are designed to minimize common mistakes with eval blocks, and nothing\n" "else." msgstr "" -#: gnu/packages/perl.scm:8781 +#: gnu/packages/perl.scm:8835 msgid "Tie a variable to a type constraint" msgstr "" -#: gnu/packages/perl.scm:8782 +#: gnu/packages/perl.scm:8836 msgid "" "This module exports a single function: @code{ttie}. It ties\n" "a variable to a type constraint, ensuring that whatever values stored in the\n" @@ -14724,11 +15704,11 @@ msgid "" "variable conform." msgstr "" -#: gnu/packages/perl.scm:8815 +#: gnu/packages/perl.scm:8869 msgid "Tiny, yet Moo(se)-compatible type constraint" msgstr "" -#: gnu/packages/perl.scm:8816 +#: gnu/packages/perl.scm:8870 msgid "" "@code{Type::Tiny} is a small class for writing type\n" "constraints, inspired by Moose's type constraint API. It has only one\n" @@ -14737,11 +15717,11 @@ msgid "" "be used with Moose, Mouse and Moo (or none of the above)." msgstr "" -#: gnu/packages/perl.scm:8837 +#: gnu/packages/perl.scm:8891 msgid "Provides an XS boost for some of Type::Tiny's built-in type constraints" msgstr "" -#: gnu/packages/perl.scm:8838 +#: gnu/packages/perl.scm:8892 msgid "" "This module is optionally used by @code{Type::Tiny} to\n" "provide faster, C-based implementations of some type constraints. This\n" @@ -14749,11 +15729,11 @@ msgid "" "so other data validation frameworks might also consider using it." msgstr "" -#: gnu/packages/perl.scm:8863 +#: gnu/packages/perl.scm:8917 msgid "Types and coercions for Moose and Moo" msgstr "" -#: gnu/packages/perl.scm:8864 +#: gnu/packages/perl.scm:8918 msgid "" "This module provides @code{Path::Tiny} types for Moose, Moo,\n" "etc. It handles two important types of coercion: coercing objects with\n" @@ -14761,29 +15741,29 @@ msgid "" "to ensure that files or directories exist." msgstr "" -#: gnu/packages/perl.scm:8886 +#: gnu/packages/perl.scm:8940 msgid "Data types for common serialisation formats" msgstr "" -#: gnu/packages/perl.scm:8887 +#: gnu/packages/perl.scm:8941 msgid "" "This module provides some extra datatypes that are used by\n" "common serialisation formats such as JSON or CBOR." msgstr "" -#: gnu/packages/perl.scm:8914 +#: gnu/packages/perl.scm:8968 msgid "Unicode normalization forms" msgstr "" -#: gnu/packages/perl.scm:8915 +#: gnu/packages/perl.scm:8969 msgid "This Perl module provides Unicode normalization forms." msgstr "" -#: gnu/packages/perl.scm:8944 +#: gnu/packages/perl.scm:8998 msgid "Unicode collation algorithm" msgstr "" -#: gnu/packages/perl.scm:8945 +#: gnu/packages/perl.scm:8999 msgid "" "This package provides tools for sorting and comparing\n" "Unicode data." @@ -14791,63 +15771,63 @@ msgstr "" "Denne pakke tilbyder værktøjer for sortering og sammenligning\n" "af Uniocodedata." -#: gnu/packages/perl.scm:8966 +#: gnu/packages/perl.scm:9020 msgid "Unicode line breaking algorithm" msgstr "" -#: gnu/packages/perl.scm:8968 +#: gnu/packages/perl.scm:9022 msgid "" "@code{Unicode::LineBreak} implements the line breaking algorithm\n" "described in Unicode Standard Annex #14. The @code{East_Asian_Width} property\n" "defined by Annex #11 is used to determine breaking positions." msgstr "" -#: gnu/packages/perl.scm:8991 +#: gnu/packages/perl.scm:9045 msgid "Encoding and decoding of UTF-8 encoding form" msgstr "" -#: gnu/packages/perl.scm:8993 +#: gnu/packages/perl.scm:9047 msgid "" "This module provides functions to encode and decode UTF-8 encoding form\n" "as specified by Unicode and ISO/IEC 10646:2011." msgstr "" -#: gnu/packages/perl.scm:9011 +#: gnu/packages/perl.scm:9065 msgid "UNIVERSAL::can() reimplementation" msgstr "" -#: gnu/packages/perl.scm:9012 +#: gnu/packages/perl.scm:9066 msgid "" "This module attempts to work around people calling\n" "UNIVERSAL::can() as a function, which it is not." msgstr "" -#: gnu/packages/perl.scm:9032 +#: gnu/packages/perl.scm:9086 msgid "UNIVERSAL::isa() reimplementation" msgstr "" -#: gnu/packages/perl.scm:9033 +#: gnu/packages/perl.scm:9087 msgid "" "This module attempts to recover from people calling\n" "UNIVERSAL::isa as a function." msgstr "" -#: gnu/packages/perl.scm:9052 +#: gnu/packages/perl.scm:9106 msgid "Require modules from a variable" msgstr "" -#: gnu/packages/perl.scm:9053 +#: gnu/packages/perl.scm:9107 msgid "" "This module lets you require other modules where the module\n" "name is in a variable, something you can't do with the @code{require}\n" "built-in." msgstr "" -#: gnu/packages/perl.scm:9072 +#: gnu/packages/perl.scm:9126 msgid "Associate user-defined magic to variables from Perl" msgstr "" -#: gnu/packages/perl.scm:9073 +#: gnu/packages/perl.scm:9127 msgid "" "Magic is Perl's way of enhancing variables. This mechanism\n" "lets the user add extra data to any variable and hook syntactical\n" @@ -14856,11 +15836,11 @@ msgid "" "having to write a single line of XS." msgstr "" -#: gnu/packages/perl.scm:9096 +#: gnu/packages/perl.scm:9150 msgid "Easily generate well-formed, namespace-aware XML" msgstr "" -#: gnu/packages/perl.scm:9097 +#: gnu/packages/perl.scm:9151 msgid "" "@code{XML::Writer} is a simple Perl module for writing XML\n" "documents: it takes care of constructing markup and escaping data correctly.\n" @@ -14870,11 +15850,11 @@ msgid "" "attribute names." msgstr "" -#: gnu/packages/perl.scm:9124 +#: gnu/packages/perl.scm:9178 msgid "Opaque, extensible XS pointer backed objects using sv_magic" msgstr "" -#: gnu/packages/perl.scm:9126 +#: gnu/packages/perl.scm:9180 msgid "" "This way of associating structs with Perl space objects is designed to\n" "supersede Perl's builtin @code{T_PTROBJ} with something that is extensible\n" @@ -14882,62 +15862,62 @@ msgid "" "neither visible nor modifiable from Perl space)." msgstr "" -#: gnu/packages/perl.scm:9148 +#: gnu/packages/perl.scm:9202 msgid "YAML for Perl" msgstr "" -#: gnu/packages/perl.scm:9149 +#: gnu/packages/perl.scm:9203 msgid "" "The YAML.pm module implements a YAML Loader and Dumper based\n" "on the YAML 1.0 specification." msgstr "" -#: gnu/packages/perl.scm:9171 +#: gnu/packages/perl.scm:9225 msgid "Perl YAML Serialization using XS and libyaml" msgstr "" -#: gnu/packages/perl.scm:9173 +#: gnu/packages/perl.scm:9227 msgid "" "@code{YAML::XS} is a Perl XS binding to libyaml which offers Perl the\n" "best YAML support to date." msgstr "" -#: gnu/packages/perl.scm:9196 +#: gnu/packages/perl.scm:9250 msgid "Read/Write YAML files" msgstr "" -#: gnu/packages/perl.scm:9197 +#: gnu/packages/perl.scm:9251 msgid "" "YAML::Tiny is a perl class for reading and writing\n" "YAML-style files, written with as little code as possible, reducing load time\n" "and memory overhead." msgstr "" -#: gnu/packages/perl.scm:9221 +#: gnu/packages/perl.scm:9275 msgid "Generate recursive-descent parsers" msgstr "" -#: gnu/packages/perl.scm:9223 +#: gnu/packages/perl.scm:9277 msgid "" "@code{Parse::RecDescent} can incrementally generate top-down\n" "recursive-descent text parsers from simple yacc-like grammar specifications." msgstr "" -#: gnu/packages/perl.scm:9243 +#: gnu/packages/perl.scm:9297 msgid "Generate and use LALR parsers" msgstr "" -#: gnu/packages/perl.scm:9244 +#: gnu/packages/perl.scm:9298 msgid "" "This package compiles yacc-like @dfn{Look Ahead LR} (LALR)\n" "grammars to generate Perl object oriented parser modules." msgstr "" -#: gnu/packages/perl.scm:9270 +#: gnu/packages/perl.scm:9324 msgid "Distribution metadata for a CPAN dist" msgstr "" -#: gnu/packages/perl.scm:9271 +#: gnu/packages/perl.scm:9325 msgid "" "Software distributions released to the CPAN include a\n" "META.json or, for older distributions, META.yml, which describes the\n" @@ -14948,11 +15928,11 @@ msgid "" "methods for interrogating that data." msgstr "" -#: gnu/packages/perl.scm:9294 +#: gnu/packages/perl.scm:9348 msgid "Set of version requirements for a CPAN dist" msgstr "" -#: gnu/packages/perl.scm:9295 +#: gnu/packages/perl.scm:9349 msgid "" "A CPAN::Meta::Requirements object models a set of version\n" "constraints like those specified in the META.yml or META.json files in CPAN\n" @@ -14961,22 +15941,22 @@ msgid "" "representation." msgstr "" -#: gnu/packages/perl.scm:9318 +#: gnu/packages/perl.scm:9372 msgid "Read and write a subset of YAML for CPAN Meta files" msgstr "" -#: gnu/packages/perl.scm:9319 +#: gnu/packages/perl.scm:9373 msgid "" "This module implements a subset of the YAML specification\n" "for use in reading and writing CPAN metadata files like META.yml and\n" "MYMETA.yml." msgstr "" -#: gnu/packages/perl.scm:9340 +#: gnu/packages/perl.scm:9394 msgid "Build and install Perl modules" msgstr "" -#: gnu/packages/perl.scm:9341 +#: gnu/packages/perl.scm:9395 msgid "" "@code{Module::Build} is a system for building, testing, and\n" "installing Perl modules; it used to be part of Perl itself until version 5.22,\n" @@ -14987,21 +15967,21 @@ msgid "" "system---most of the @code{Module::Build} code is pure-Perl." msgstr "" -#: gnu/packages/perl.scm:9367 +#: gnu/packages/perl.scm:9421 msgid "Parse META.yml and META.json CPAN metadata files" msgstr "" -#: gnu/packages/perl.scm:9368 +#: gnu/packages/perl.scm:9422 msgid "" "Parse::CPAN::Meta is a parser for META.json and META.yml\n" "files, using JSON::PP and/or CPAN::Meta::YAML." msgstr "" -#: gnu/packages/perl.scm:9386 +#: gnu/packages/perl.scm:9440 msgid "Common Scalar and List utility subroutines" msgstr "" -#: gnu/packages/perl.scm:9387 +#: gnu/packages/perl.scm:9441 msgid "" "This package contains a selection of subroutines that people\n" "have expressed would be nice to have in the perl core, but the usage would not\n" @@ -15009,39 +15989,58 @@ msgid "" "such that being individual extensions would be wasteful." msgstr "" -#: gnu/packages/perl.scm:9411 +#: gnu/packages/perl.scm:9465 msgid "Cross-platform functions emulating common shell commands" msgstr "" -#: gnu/packages/perl.scm:9413 +#: gnu/packages/perl.scm:9467 msgid "Shell::Command is a thin wrapper around ExtUtils::Command." msgstr "" -#: gnu/packages/perl.scm:9440 +#: gnu/packages/perl.scm:9494 msgid "Object-oriented File::Find replacement in Perl" msgstr "" -#: gnu/packages/perl.scm:9441 +#: gnu/packages/perl.scm:9495 msgid "" "File::Find::Object is an object-oriented\n" "File::Find replacement in Perl." msgstr "" -#: gnu/packages/perl.scm:9470 +#: gnu/packages/perl.scm:9524 msgid "Alternative interface to File::Find::Object" msgstr "" -#: gnu/packages/perl.scm:9471 +#: gnu/packages/perl.scm:9525 msgid "" "File::Find::Object::Rule is an alternative Perl\n" "interface to File::Find::Object." msgstr "" -#: gnu/packages/perl.scm:9491 +#: gnu/packages/perl.scm:9546 +msgid "Wrapper for @code{File::Find} ala @code{find(1)}" +msgstr "" + +#: gnu/packages/perl.scm:9548 +msgid "" +"@code{File::Find} is great, but constructing the wanted routine can\n" +"sometimes be a pain. @code{File::Finder} provides a wanted-writer, using\n" +"syntax that is directly mappable to the @code{find(1)} command's syntax.\n" +"\n" +"A @code{File::Finder} object contains a hash of @code{File::Find} options, and\n" +"a series of steps that mimic find's predicates. Initially, a\n" +"@code{File::Finder} object has no steps. Each step method clones the previous\n" +"object's options and steps, and then adds the new step, returning the new\n" +"object. In this manner, an object can be grown, step by step, by chaining\n" +"method calls. Furthermore, a partial sequence can be created and held, and\n" +"used as the head of many different sequences." +msgstr "" + +#: gnu/packages/perl.scm:9577 msgid "TTF font support for Perl" msgstr "" -#: gnu/packages/perl.scm:9492 +#: gnu/packages/perl.scm:9578 msgid "" "This package provides a Perl module for TrueType/OpenType\n" "font hacking. It supports reading, processing and writing of the following\n" @@ -15050,22 +16049,22 @@ msgid "" "prop, vhea, vmtx and the reading and writing of all other table types." msgstr "" -#: gnu/packages/perl.scm:9530 +#: gnu/packages/perl.scm:9616 msgid "Collection of Perl modules for time/date manipulation" msgstr "" -#: gnu/packages/perl.scm:9531 +#: gnu/packages/perl.scm:9617 msgid "" "Provides several perl modules for date/time manipulation:\n" "@code{Time::CTime.pm}, @code{Time::JulianDay.pm}, @code{Time::ParseDate.pm},\n" "@code{Time::Timezone.pm}, and @code{Time::DaysInMonth.pm}." msgstr "" -#: gnu/packages/perl.scm:9560 +#: gnu/packages/perl.scm:9646 msgid "Perl library for testing if a time() is in a specific period" msgstr "" -#: gnu/packages/perl.scm:9561 +#: gnu/packages/perl.scm:9647 msgid "" "This Perl library provides a function which tells whether a\n" "specific time falls within a specified time period. Its syntax for specifying\n" @@ -15075,11 +16074,11 @@ msgid "" "1998\"." msgstr "" -#: gnu/packages/perl.scm:9593 +#: gnu/packages/perl.scm:9679 msgid "Iterative, recursive file finder" msgstr "" -#: gnu/packages/perl.scm:9594 +#: gnu/packages/perl.scm:9680 msgid "" "Path::Iterator::Rule iterates over files and directories to\n" "identify ones matching a user-defined set of rules. The API is based heavily\n" @@ -15106,11 +16105,11 @@ msgid "" "arduous to type for one-liners." msgstr "" -#: gnu/packages/perl.scm:9634 +#: gnu/packages/perl.scm:9720 msgid "Include constants from POD" msgstr "" -#: gnu/packages/perl.scm:9635 +#: gnu/packages/perl.scm:9721 msgid "" "This module allows you to specify those constants that\n" "should be documented in your POD, and pull them out a run time in a fairly\n" @@ -15122,96 +16121,96 @@ msgid "" "(or it can't find %INC{caller()})." msgstr "" -#: gnu/packages/perl.scm:9662 +#: gnu/packages/perl.scm:9748 msgid "Collection of regexp patterns" msgstr "" -#: gnu/packages/perl.scm:9663 +#: gnu/packages/perl.scm:9749 msgid "" "Regexp::Pattern is a convention for organizing reusable\n" "regexp patterns in modules." msgstr "" -#: gnu/packages/photo.scm:82 +#: gnu/packages/photo.scm:88 msgid "Raw image decoder" msgstr "" -#: gnu/packages/photo.scm:84 +#: gnu/packages/photo.scm:90 msgid "" "LibRaw is a library for reading RAW files obtained from digital photo\n" "cameras (CRW/CR2, NEF, RAF, DNG, and others)." msgstr "" -#: gnu/packages/photo.scm:103 +#: gnu/packages/photo.scm:125 msgid "Read and manipulate EXIF data in digital photographs" msgstr "" -#: gnu/packages/photo.scm:105 +#: gnu/packages/photo.scm:127 msgid "" "The libexif C library allows applications to read, edit, and save EXIF\n" "data as produced by digital cameras." msgstr "" -#: gnu/packages/photo.scm:131 +#: gnu/packages/photo.scm:153 msgid "Accessing digital cameras" msgstr "" -#: gnu/packages/photo.scm:133 +#: gnu/packages/photo.scm:155 msgid "" "This is the library backend for gphoto2. It contains the code for PTP,\n" "MTP, and other vendor specific protocols for controlling and transferring data\n" "from digital cameras." msgstr "" -#: gnu/packages/photo.scm:175 +#: gnu/packages/photo.scm:197 msgid "Command-line tools to access digital cameras" msgstr "" -#: gnu/packages/photo.scm:177 +#: gnu/packages/photo.scm:199 msgid "" "Gphoto2 is a set of command line utilities for manipulating a large\n" "number of different digital cameras. Through libgphoto2, it supports PTP,\n" "MTP, and much more." msgstr "" -#: gnu/packages/photo.scm:210 +#: gnu/packages/photo.scm:232 msgid "Program and Perl library to manipulate EXIF and other metadata" msgstr "Program og Perlbibliotek til at manipulere EXIF og andre metadata" -#: gnu/packages/photo.scm:211 +#: gnu/packages/photo.scm:233 msgid "" "This package provides the @code{exiftool} command and the\n" "@code{Image::ExifTool} Perl library to manipulate EXIF tags of digital images\n" "and a wide variety of other metadata." msgstr "" -#: gnu/packages/photo.scm:235 +#: gnu/packages/photo.scm:257 msgid "Library for panoramic images" msgstr "" -#: gnu/packages/photo.scm:237 +#: gnu/packages/photo.scm:259 msgid "" "The libpano13 package contains the backend library written by the\n" "Panorama Tools project for building panoramic images from a set of\n" "overlapping images, as well as some command line tools." msgstr "" -#: gnu/packages/photo.scm:281 +#: gnu/packages/photo.scm:303 msgid "Tools for combining and blending images" msgstr "" -#: gnu/packages/photo.scm:283 +#: gnu/packages/photo.scm:305 msgid "" "Enblend blends away the seams in a panoramic image mosaic using a\n" "multi-resolution spline. Enfuse merges different exposures of the same\n" "scene to produce an image that looks much like a tone-mapped image." msgstr "" -#: gnu/packages/photo.scm:314 +#: gnu/packages/photo.scm:336 msgid "Library to correct optical lens defects with a lens database" msgstr "" -#: gnu/packages/photo.scm:315 +#: gnu/packages/photo.scm:337 msgid "" "Digital photographs are not ideal. Of course, the better is\n" "your camera, the better the results will be, but in any case if you look\n" @@ -15225,11 +16224,11 @@ msgid "" "photographic equipment." msgstr "" -#: gnu/packages/photo.scm:391 +#: gnu/packages/photo.scm:413 msgid "Virtual lighttable and darkroom for photographers" msgstr "" -#: gnu/packages/photo.scm:392 +#: gnu/packages/photo.scm:414 msgid "" "Darktable is a photography workflow application and RAW\n" "developer. It manages your digital negatives in a database, lets you view\n" @@ -15237,22 +16236,22 @@ msgid "" "and enhance them." msgstr "" -#: gnu/packages/photo.scm:463 +#: gnu/packages/photo.scm:485 msgid "Panorama photo stitcher" msgstr "" -#: gnu/packages/photo.scm:465 +#: gnu/packages/photo.scm:487 msgid "" "Hugin is an easy to use panoramic imaging toolchain with a graphical\n" "user interface. It can be used to assemble a mosaic of photographs into\n" "a complete panorama and stitch any series of overlapping pictures." msgstr "" -#: gnu/packages/photo.scm:516 +#: gnu/packages/photo.scm:538 msgid "Raw image developing and processing" msgstr "" -#: gnu/packages/photo.scm:517 +#: gnu/packages/photo.scm:539 msgid "" "RawTherapee is a raw image processing suite. It comprises a\n" "subset of image editing operations specifically aimed at non-destructive raw\n" @@ -15308,11 +16307,11 @@ msgid "" "'special effects' using the filter mechanism." msgstr "" -#: gnu/packages/scanner.scm:87 +#: gnu/packages/scanner.scm:91 msgid "Raster image scanner library and drivers, without scanner support" msgstr "" -#: gnu/packages/scanner.scm:88 +#: gnu/packages/scanner.scm:92 msgid "" "SANE stands for \"Scanner Access Now Easy\" and is an API\n" "proving access to any raster image scanner hardware (flatbed scanner,\n" @@ -15320,11 +16319,11 @@ msgid "" "package contains the library, but no drivers." msgstr "" -#: gnu/packages/scanner.scm:126 +#: gnu/packages/scanner.scm:130 msgid "Raster image scanner library and drivers, with scanner support" msgstr "" -#: gnu/packages/scanner.scm:127 +#: gnu/packages/scanner.scm:131 msgid "" "SANE stands for \"Scanner Access Now Easy\" and is an API\n" "proving access to any raster image scanner hardware (flatbed scanner,\n" @@ -15332,22 +16331,22 @@ msgid "" "package contains the library and drivers." msgstr "" -#: gnu/packages/scheme.scm:193 +#: gnu/packages/scheme.scm:200 msgid "A Scheme implementation with integrated editor and debugger" msgstr "" -#: gnu/packages/scheme.scm:195 +#: gnu/packages/scheme.scm:202 msgid "" "GNU/MIT Scheme is an implementation of the Scheme programming\n" "language. It provides an interpreter, a compiler and a debugger. It also\n" "features an integrated Emacs-like editor and a large runtime library." msgstr "" -#: gnu/packages/scheme.scm:281 +#: gnu/packages/scheme.scm:290 msgid "Efficient Scheme compiler" msgstr "" -#: gnu/packages/scheme.scm:283 +#: gnu/packages/scheme.scm:292 msgid "" "Bigloo is a Scheme implementation devoted to one goal: enabling\n" "Scheme based programming style where C(++) is usually\n" @@ -15359,11 +16358,11 @@ msgid "" "Scheme and C programs and between Scheme and Java programs." msgstr "" -#: gnu/packages/scheme.scm:332 +#: gnu/packages/scheme.scm:340 msgid "Multi-tier programming language for the Web 2.0" msgstr "" -#: gnu/packages/scheme.scm:334 +#: gnu/packages/scheme.scm:342 msgid "" "HOP is a multi-tier programming language for the Web 2.0 and the\n" "so-called diffuse Web. It is designed for programming interactive web\n" @@ -15372,33 +16371,33 @@ msgid "" "mashups, office (web agendas, mail clients, ...), etc." msgstr "" -#: gnu/packages/scheme.scm:375 +#: gnu/packages/scheme.scm:383 msgid "R5RS Scheme implementation that compiles native code via C" msgstr "" -#: gnu/packages/scheme.scm:377 +#: gnu/packages/scheme.scm:385 msgid "" "CHICKEN is a compiler for the Scheme programming language. CHICKEN\n" "produces portable and efficient C, supports almost all of the R5RS Scheme\n" "language standard, and includes many enhancements and extensions." msgstr "" -#: gnu/packages/scheme.scm:396 +#: gnu/packages/scheme.scm:404 msgid "Scheme implementation using a bytecode interpreter" msgstr "" -#: gnu/packages/scheme.scm:398 +#: gnu/packages/scheme.scm:406 msgid "" "Scheme 48 is an implementation of Scheme based on a byte-code\n" "interpreter and is designed to be used as a testbed for experiments in\n" "implementation techniques and as an expository tool." msgstr "" -#: gnu/packages/scheme.scm:515 +#: gnu/packages/scheme.scm:525 msgid "Implementation of Scheme and related languages" msgstr "" -#: gnu/packages/scheme.scm:517 +#: gnu/packages/scheme.scm:527 msgid "" "Racket is an implementation of the Scheme programming language (R5RS and\n" "R6RS) and related languages, such as Typed Racket. It features a compiler and\n" @@ -15406,11 +16405,11 @@ msgid "" "of libraries." msgstr "" -#: gnu/packages/scheme.scm:555 +#: gnu/packages/scheme.scm:554 msgid "Efficient Scheme interpreter and compiler" msgstr "" -#: gnu/packages/scheme.scm:557 +#: gnu/packages/scheme.scm:556 msgid "" "Gambit consists of two main programs: gsi, the Gambit Scheme\n" "interpreter, and gsc, the Gambit Scheme compiler. The interpreter contains\n" @@ -15421,11 +16420,11 @@ msgid "" "mixed." msgstr "" -#: gnu/packages/scheme.scm:591 +#: gnu/packages/scheme.scm:590 msgid "Small embeddable Scheme implementation" msgstr "" -#: gnu/packages/scheme.scm:593 +#: gnu/packages/scheme.scm:592 msgid "" "Chibi-Scheme is a very small library with no external dependencies\n" "intended for use as an extension and scripting language in C programs. In\n" @@ -15434,11 +16433,11 @@ msgid "" "threads." msgstr "" -#: gnu/packages/scheme.scm:763 +#: gnu/packages/scheme.scm:764 msgid "Scmutils library for MIT Scheme" msgstr "" -#: gnu/packages/scheme.scm:764 +#: gnu/packages/scheme.scm:765 msgid "" "The Scmutils system is an integrated library of\n" "procedures, embedded in the programming language Scheme, and intended to\n" @@ -15460,31 +16459,31 @@ msgid "" "metalinguistic abstraction, recursion, interpreters, and modular programming." msgstr "" -#: gnu/packages/scheme.scm:856 +#: gnu/packages/scheme.scm:857 msgid "SRE String pattern-matching library for scheme48" msgstr "" -#: gnu/packages/scheme.scm:858 +#: gnu/packages/scheme.scm:859 msgid "" "String pattern-matching library for scheme48 based on the SRE\n" "regular-expression notation." msgstr "" -#: gnu/packages/scheme.scm:890 +#: gnu/packages/scheme.scm:892 msgid "Compatibility and utility library for Scheme" msgstr "" -#: gnu/packages/scheme.scm:891 +#: gnu/packages/scheme.scm:893 msgid "" "SLIB is a portable Scheme library providing compatibility and\n" "utility functions for all standard Scheme implementations." msgstr "" -#: gnu/packages/scheme.scm:952 +#: gnu/packages/scheme.scm:949 msgid "Scheme implementation conforming to R5RS and IEEE P1178" msgstr "" -#: gnu/packages/scheme.scm:953 +#: gnu/packages/scheme.scm:950 msgid "" "GNU SCM is an implementation of Scheme. This\n" "implementation includes Hobbit, a Scheme-to-C compiler, which can\n" @@ -15492,11 +16491,11 @@ msgid "" "linked with a SCM executable." msgstr "" -#: gnu/packages/scheme.scm:1010 +#: gnu/packages/scheme.scm:1007 msgid "Light-weight interpreter for the Scheme programming language" msgstr "" -#: gnu/packages/scheme.scm:1012 +#: gnu/packages/scheme.scm:1009 msgid "" "TinyScheme is a light-weight Scheme interpreter that implements as large a\n" "subset of R5RS as was possible without getting very large and complicated.\n" @@ -15512,11 +16511,38 @@ msgid "" "small program, it is easy to comprehend, get to grips with, and use." msgstr "" -#: gnu/packages/search.scm:72 -msgid "Search Engine Library" +#: gnu/packages/scheme.scm:1088 +msgid "Brutally efficient Scheme compiler" msgstr "" -#: gnu/packages/search.scm:74 +#: gnu/packages/scheme.scm:1090 +msgid "" +"Stalin is an aggressively optimizing whole-program compiler\n" +"for Scheme that does polyvariant interprocedural flow analysis,\n" +"flow-directed interprocedural escape analysis, flow-directed\n" +"lightweight CPS conversion, flow-directed lightweight closure\n" +"conversion, flow-directed interprocedural lifetime analysis, automatic\n" +"in-lining, unboxing, and flow-directed program-specific and\n" +"program-point-specific low-level representation selection and code\n" +"generation." +msgstr "" + +#: gnu/packages/scheme.scm:1142 +msgid "Scheme-like lisp implementation" +msgstr "Scheme-lignende lisp-implementering" + +#: gnu/packages/scheme.scm:1144 +msgid "" +"@code{femtolisp} is a scheme-like lisp implementation with a\n" +"simple, elegant Scheme dialect. It is a lisp-1 with lexical scope.\n" +"The core is 12 builtin special forms and 33 builtin functions." +msgstr "" + +#: gnu/packages/search.scm:75 +msgid "Search Engine Library" +msgstr "Søgemotorbibliotek" + +#: gnu/packages/search.scm:77 msgid "" "Xapian is a highly adaptable toolkit which allows developers to easily\n" "add advanced indexing and search facilities to their own applications. It\n" @@ -15524,15 +16550,15 @@ msgid "" "rich set of boolean query operators." msgstr "" -#: gnu/packages/search.scm:106 +#: gnu/packages/search.scm:109 msgid "Python bindings for the Xapian search engine library" msgstr "Pythonbindinger for Xapian-søgemotorbiblioteket" -#: gnu/packages/search.scm:145 +#: gnu/packages/search.scm:148 msgid "Tool for Obsessive Compulsive Classifiers" msgstr "Værktøjt for Obsessive Compulsive Classifiers" -#: gnu/packages/search.scm:147 +#: gnu/packages/search.scm:150 msgid "" "libtocc is the engine of the Tocc project, a tag-based file management\n" "system. The goal of Tocc is to provide a better system for classifying files\n" @@ -15540,21 +16566,21 @@ msgid "" "files and directories." msgstr "" -#: gnu/packages/search.scm:169 +#: gnu/packages/search.scm:172 msgid "Command-line interface to libtocc" msgstr "Kommandolinjegrænseflade til libtocc" -#: gnu/packages/search.scm:171 +#: gnu/packages/search.scm:174 msgid "" "Tocc is a tag-based file management system. This package contains the\n" "command line tool for interacting with libtocc." msgstr "" -#: gnu/packages/search.scm:189 +#: gnu/packages/search.scm:192 msgid "Finding text and HTML files that match boolean expressions" msgstr "Find tekst- og HTML-filer som matcher booleske udtryk" -#: gnu/packages/search.scm:191 +#: gnu/packages/search.scm:194 msgid "" "GNU Bool is a utility to perform text searches on files using Boolean\n" "expressions. For example, a search for \"hello AND world\" would return a\n" @@ -15565,22 +16591,22 @@ msgid "" "for parsing HTML files." msgstr "" -#: gnu/packages/search.scm:221 +#: gnu/packages/search.scm:224 msgid "Full-text search system" msgstr "" -#: gnu/packages/search.scm:222 +#: gnu/packages/search.scm:225 msgid "" "Hyper Estraier can be used to integrate full-text\n" "search into applications, using either the provided command line and CGI\n" "interfaces, or a C API." msgstr "" -#: gnu/packages/search.scm:240 +#: gnu/packages/search.scm:243 msgid "Locate files on the file system" msgstr "Lokaliser filer på filsystemet" -#: gnu/packages/search.scm:242 +#: gnu/packages/search.scm:245 msgid "" "mlocate is a locate/updatedb implementation. The 'm' stands for\n" "\"merging\": @code{updatedb} reuses the existing database to avoid rereading\n" @@ -15590,22 +16616,22 @@ msgid "" "conflict with slocate compatibility." msgstr "" -#: gnu/packages/search.scm:307 +#: gnu/packages/search.scm:310 msgid "Web indexing system" msgstr "" -#: gnu/packages/search.scm:309 +#: gnu/packages/search.scm:312 msgid "" "Swish-e is Simple Web Indexing System for Humans - Enhanced. Swish-e\n" "can quickly and easily index directories of files or remote web sites and\n" "search the generated indexes." msgstr "" -#: gnu/packages/search.scm:351 +#: gnu/packages/search.scm:379 msgid "Personal document indexing system" msgstr "" -#: gnu/packages/search.scm:353 +#: gnu/packages/search.scm:381 msgid "" "Xapers is a personal document indexing system,\n" "geared towards academic journal articles build on the Xapian search engine.\n" @@ -15641,11 +16667,11 @@ msgid "" "direct descendant of NetBSD's Almquist Shell (@command{ash})." msgstr "" -#: gnu/packages/shells.scm:136 +#: gnu/packages/shells.scm:137 msgid "The friendly interactive shell" msgstr "" -#: gnu/packages/shells.scm:138 +#: gnu/packages/shells.scm:139 msgid "" "Fish (friendly interactive shell) is a shell focused on interactive use,\n" "discoverability, and friendliness. Fish has very user-friendly and powerful\n" @@ -15657,21 +16683,21 @@ msgid "" "and syntax highlighting." msgstr "" -#: gnu/packages/shells.scm:187 +#: gnu/packages/shells.scm:183 msgid "Alternative implementation of the rc shell by Byron Rakitzis" msgstr "" -#: gnu/packages/shells.scm:189 +#: gnu/packages/shells.scm:185 msgid "" "This is a reimplementation by Byron Rakitzis of the Plan 9 shell. It\n" "has a small feature set similar to a traditional Bourne shell." msgstr "" -#: gnu/packages/shells.scm:220 +#: gnu/packages/shells.scm:216 msgid "Extensible shell with higher-order functions" msgstr "" -#: gnu/packages/shells.scm:222 +#: gnu/packages/shells.scm:218 msgid "" "Es is an extensible shell. The language was derived from the Plan 9\n" "shell, rc, and was influenced by functional programming languages, such as\n" @@ -15680,11 +16706,11 @@ msgid "" "written by Paul Haahr and Byron Rakitzis." msgstr "" -#: gnu/packages/shells.scm:282 +#: gnu/packages/shells.scm:278 msgid "Unix shell based on csh" msgstr "" -#: gnu/packages/shells.scm:284 +#: gnu/packages/shells.scm:280 msgid "" "Tcsh is an enhanced, but completely compatible version of the Berkeley\n" "UNIX C shell (csh). It is a command language interpreter usable both as an\n" @@ -15693,11 +16719,11 @@ msgid "" "history mechanism, job control and a C-like syntax." msgstr "" -#: gnu/packages/shells.scm:343 +#: gnu/packages/shells.scm:339 msgid "Powerful shell for interactive use and scripting" msgstr "Funktionsrig skal for interaktiv brug og skriptopbygning" -#: gnu/packages/shells.scm:344 +#: gnu/packages/shells.scm:340 msgid "" "The Z shell (zsh) is a Unix shell that can be used\n" "as an interactive login shell and as a powerful command interpreter\n" @@ -15706,11 +16732,11 @@ msgid "" "ksh, and tcsh." msgstr "" -#: gnu/packages/shells.scm:383 +#: gnu/packages/shells.scm:379 msgid "Python-ish shell" msgstr "" -#: gnu/packages/shells.scm:385 +#: gnu/packages/shells.scm:381 msgid "" "Xonsh is a Python-ish, BASHwards-looking shell language and command\n" "prompt. The language is a superset of Python 3.4+ with additional shell\n" @@ -15719,11 +16745,11 @@ msgid "" "use of experts and novices alike." msgstr "" -#: gnu/packages/shells.scm:432 +#: gnu/packages/shells.scm:425 msgid "Unix shell embedded in Scheme" msgstr "" -#: gnu/packages/shells.scm:434 +#: gnu/packages/shells.scm:427 msgid "" "Scsh is a Unix shell embedded in Scheme. Scsh has two main\n" "components: a process notation for running programs and setting up pipelines\n" @@ -15731,11 +16757,11 @@ msgid "" "operating system." msgstr "" -#: gnu/packages/shells.scm:473 +#: gnu/packages/shells.scm:466 msgid "Minimal zero-config readline replacement" msgstr "" -#: gnu/packages/shells.scm:475 +#: gnu/packages/shells.scm:468 msgid "" "Linenoise is a minimal, zero-config, readline replacement.\n" "Its features include:\n" @@ -15749,11 +16775,11 @@ msgid "" "@end enumerate\n" msgstr "" -#: gnu/packages/shells.scm:537 +#: gnu/packages/shells.scm:530 msgid "Extremely minimal shell with the simplest syntax possible" msgstr "" -#: gnu/packages/shells.scm:539 +#: gnu/packages/shells.scm:532 msgid "" "S is a new shell that aims to be extremely simple.\n" "S does not implemnt the POSIX shell standard.\n" @@ -15766,42 +16792,42 @@ msgid "" "A @code{andglob} program is also provided along with s." msgstr "" -#: gnu/packages/shells.scm:567 +#: gnu/packages/shells.scm:560 msgid "Port of OpenBSD Korn Shell" msgstr "" -#: gnu/packages/shells.scm:569 +#: gnu/packages/shells.scm:562 msgid "" "Oksh is a port of the OpenBSD Korn Shell.\n" "The OpenBSD Korn Shell is a cleaned up and enhanced ksh." msgstr "" -#: gnu/packages/shells.scm:601 +#: gnu/packages/shells.scm:594 msgid "Korn Shell from OpenBSD" msgstr "" -#: gnu/packages/shells.scm:603 +#: gnu/packages/shells.scm:596 msgid "" "loksh is a Linux port of OpenBSD's @command{ksh}. It is a small,\n" "interactive POSIX shell targeted at resource-constrained systems." msgstr "" -#: gnu/packages/shells.scm:641 +#: gnu/packages/shells.scm:635 msgid "Korn Shell from MirBSD" msgstr "" -#: gnu/packages/shells.scm:642 +#: gnu/packages/shells.scm:636 msgid "" "mksh is an actively developed free implementation of the\n" "Korn Shell programming language and a successor to the Public Domain Korn\n" "Shell (pdksh)." msgstr "" -#: gnu/packages/shells.scm:684 +#: gnu/packages/shells.scm:678 msgid "Bash-compatible Unix shell" msgstr "Bash-kompatibel Unixskal" -#: gnu/packages/shells.scm:685 +#: gnu/packages/shells.scm:679 msgid "" "Oil is a Unix / POSIX shell, compatible with Bash. It\n" "implements the Oil language, which is a new shell language to which Bash can be\n" @@ -15810,11 +16836,11 @@ msgid "" "is commonly written." msgstr "" -#: gnu/packages/telephony.scm:69 +#: gnu/packages/telephony.scm:77 msgid "(u)Common C++ framework for threaded applications" msgstr "(u)Common C++-ramme for trådede programmer" -#: gnu/packages/telephony.scm:70 +#: gnu/packages/telephony.scm:78 msgid "" "GNU Common C++ is an portable, optimized class framework for\n" "threaded applications, supporting concurrent synchronization, inter-process\n" @@ -15823,11 +16849,11 @@ msgid "" "reimplementation." msgstr "" -#: gnu/packages/telephony.scm:90 +#: gnu/packages/telephony.scm:98 msgid "Common C++ framework for threaded applications" msgstr "" -#: gnu/packages/telephony.scm:91 +#: gnu/packages/telephony.scm:99 msgid "" "GNU uCommon C++ is meant as a very light-weight C++ library\n" "to facilitate using C++ design patterns even for very deeply embedded\n" @@ -15835,11 +16861,11 @@ msgid "" "support." msgstr "" -#: gnu/packages/telephony.scm:113 +#: gnu/packages/telephony.scm:121 msgid "Implementation of RTP (real-time transport protocol)" msgstr "" -#: gnu/packages/telephony.scm:114 +#: gnu/packages/telephony.scm:122 msgid "" "GNU ccRTP is an implementation of RTP, the real-time transport\n" "protocol from the IETF. It is suitable both for high capacity servers and\n" @@ -15848,22 +16874,22 @@ msgid "" "packet-manipulation library." msgstr "" -#: gnu/packages/telephony.scm:136 +#: gnu/packages/telephony.scm:144 msgid "Library implementing SIP (RFC-3261)" msgstr "" -#: gnu/packages/telephony.scm:137 +#: gnu/packages/telephony.scm:145 msgid "" "GNU oSIP is an implementation of the SIP protocol. It is\n" "used to provide multimedia and telecom software developers with an interface\n" "to initiate and control SIP sessions." msgstr "" -#: gnu/packages/telephony.scm:156 +#: gnu/packages/telephony.scm:164 msgid "Sip abstraction library" msgstr "" -#: gnu/packages/telephony.scm:157 +#: gnu/packages/telephony.scm:165 msgid "" "EXosip is a library that hides the complexity of using the\n" "SIP protocol for multimedia session establishment. This protocol is mainly to\n" @@ -15872,11 +16898,11 @@ msgid "" "multiplayer games." msgstr "" -#: gnu/packages/telephony.scm:200 +#: gnu/packages/telephony.scm:208 msgid "Secure peer-to-peer VoIP server for the SIP protocol" msgstr "" -#: gnu/packages/telephony.scm:201 +#: gnu/packages/telephony.scm:209 msgid "" "GNU SIP Witch is a peer-to-peer Voice-over-IP server that\n" "uses the SIP protocol. Calls can be made from behind NAT firewalls and\n" @@ -15886,22 +16912,22 @@ msgid "" "internet." msgstr "" -#: gnu/packages/telephony.scm:246 +#: gnu/packages/telephony.scm:236 msgid "Secure RTP (SRTP) Reference Implementation" msgstr "" -#: gnu/packages/telephony.scm:248 +#: gnu/packages/telephony.scm:238 msgid "" "This package provides an implementation of the Secure Real-time Transport\n" "Protocol (@dfn{SRTP}), the Universal Security Transform (@dfn{UST}), and a\n" "supporting cryptographic kernel." msgstr "" -#: gnu/packages/telephony.scm:272 +#: gnu/packages/telephony.scm:262 msgid "Utilities library for linphone software" msgstr "Redskabsbibliotek for programmet linphone" -#: gnu/packages/telephony.scm:273 +#: gnu/packages/telephony.scm:263 msgid "" "BCtoolbox is a utilities library used by Belledonne\n" "Communications softwares like linphone." @@ -15909,11 +16935,11 @@ msgstr "" "BCtoolbox er et redskabsbibliotek brugt af Belledonne\n" "Communications-programmer såsom linphone." -#: gnu/packages/telephony.scm:295 +#: gnu/packages/telephony.scm:285 msgid "Implementation of the Real-time transport protocol" msgstr "Implementering af realtids transportprotokollen" -#: gnu/packages/telephony.scm:296 +#: gnu/packages/telephony.scm:286 msgid "" "oRTP is a library implementing the Real-time transport\n" "protocol (RFC 3550)." @@ -15921,21 +16947,21 @@ msgstr "" "ORTP er et bibliotek, der implementerer realtids\n" "transportprotokollen (RFC 3550)." -#: gnu/packages/telephony.scm:329 +#: gnu/packages/telephony.scm:312 msgid "Inter-Asterisk-Protocol library" msgstr "" -#: gnu/packages/telephony.scm:330 +#: gnu/packages/telephony.scm:313 msgid "" "LibIAX2 implements the Inter-Asterisk-Protocol for relaying\n" "Voice-over-IP (VoIP) communications." msgstr "" -#: gnu/packages/telephony.scm:361 +#: gnu/packages/telephony.scm:344 msgid "Simple VoIP program to create conferences from the terminal" msgstr "" -#: gnu/packages/telephony.scm:363 +#: gnu/packages/telephony.scm:346 msgid "" "Seren is a simple VoIP program based on the Opus codec that allows you\n" "to create a voice conference from the terminal, with up to 10 participants,\n" @@ -15944,11 +16970,11 @@ msgid "" "address of one of the participants." msgstr "" -#: gnu/packages/telephony.scm:475 +#: gnu/packages/telephony.scm:459 msgid "Low-latency, high quality voice chat software" msgstr "" -#: gnu/packages/telephony.scm:477 +#: gnu/packages/telephony.scm:461 msgid "" "Mumble is an low-latency, high quality voice chat\n" "software primarily intended for use while gaming.\n" @@ -15956,12 +16982,24 @@ msgid "" "@code{mumble} for the client, and @code{murmur} for the server." msgstr "" -#: gnu/packages/tex.scm:200 gnu/packages/tex.scm:3967 -#: gnu/packages/tex.scm:4029 +#: gnu/packages/telephony.scm:526 +msgid "Softphone for voice over IP and instant messaging" +msgstr "" + +#: gnu/packages/telephony.scm:527 +msgid "" +"Twinkle is a softphone for your voice over IP and instant\n" +"messaging communcations using the SIP protocol. You can use it for direct IP\n" +"phone to IP phone communication or in a network using a SIP proxy to route your\n" +"calls and messages" +msgstr "" + +#: gnu/packages/tex.scm:219 gnu/packages/tex.scm:4056 +#: gnu/packages/tex.scm:4119 msgid "TeX Live, a package of the TeX typesetting system" msgstr "" -#: gnu/packages/tex.scm:202 +#: gnu/packages/tex.scm:221 msgid "" "TeX Live provides a comprehensive TeX document production system.\n" "It includes all the major TeX-related programs, macro packages, and fonts\n" @@ -15971,11 +17009,11 @@ msgid "" "This package contains the binaries." msgstr "" -#: gnu/packages/tex.scm:270 +#: gnu/packages/tex.scm:289 msgid "DVI to PostScript drivers" msgstr "DVI- til PostScript-drivere" -#: gnu/packages/tex.scm:271 +#: gnu/packages/tex.scm:290 msgid "" "This package provides files needed for converting DVI files\n" "to PostScript." @@ -15983,11 +17021,11 @@ msgstr "" "Denne pakke tilbyder filer krævet for at konvertere DVI-filer\n" "til PostScript." -#: gnu/packages/tex.scm:305 +#: gnu/packages/tex.scm:324 msgid "Unicode data and loaders for TeX" msgstr "" -#: gnu/packages/tex.scm:306 +#: gnu/packages/tex.scm:325 msgid "" "This bundle provides generic access to Unicode Consortium\n" "data for TeX use. It contains a set of text files provided by the Unicode\n" @@ -16000,11 +17038,11 @@ msgid "" "out to date by @code{unicode-letters.tex}. " msgstr "" -#: gnu/packages/tex.scm:344 +#: gnu/packages/tex.scm:363 msgid "Hyphenation patterns for German" msgstr "Orddelingsmønstre for tysk" -#: gnu/packages/tex.scm:345 +#: gnu/packages/tex.scm:364 msgid "" "The package provides experimental hyphenation patterns for\n" "the German language, covering both traditional and reformed orthography. The\n" @@ -16012,11 +17050,11 @@ msgid "" "bundle." msgstr "" -#: gnu/packages/tex.scm:380 +#: gnu/packages/tex.scm:399 msgid "Files for creating TeX formats" msgstr "Filer til at oprette TeX-formater" -#: gnu/packages/tex.scm:381 +#: gnu/packages/tex.scm:400 msgid "" "This bundle provides a collection of model \".ini\" files\n" "for creating TeX formats. These files are commonly used to introduced\n" @@ -16025,11 +17063,11 @@ msgid "" "to adapt the plain e-TeX source file to work with XeTeX and LuaTeX." msgstr "" -#: gnu/packages/tex.scm:415 +#: gnu/packages/tex.scm:434 msgid "Hyphenation patterns expressed in UTF-8" msgstr "Orddelingsmønstre udtrykt i UTF-8" -#: gnu/packages/tex.scm:416 +#: gnu/packages/tex.scm:435 msgid "" "Modern native UTF-8 engines such as XeTeX and LuaTeX need\n" "hyphenation patterns in UTF-8 format, whereas older systems require\n" @@ -16042,21 +17080,21 @@ msgid "" "converters, will completely supplant the older patterns." msgstr "" -#: gnu/packages/tex.scm:492 +#: gnu/packages/tex.scm:511 msgid "Metafont base files" msgstr "" -#: gnu/packages/tex.scm:493 +#: gnu/packages/tex.scm:512 msgid "" "This package provides the Metafont base files needed to\n" "build fonts using the Metafont system." msgstr "" -#: gnu/packages/tex.scm:524 +#: gnu/packages/tex.scm:543 msgid "Scheme for naming fonts in TeX" msgstr "" -#: gnu/packages/tex.scm:525 +#: gnu/packages/tex.scm:544 msgid "" "This is Fontname, a naming scheme for (the base part of)\n" "external TeX font filenames. This makes at most eight-character names\n" @@ -16064,11 +17102,11 @@ msgid "" "documents." msgstr "" -#: gnu/packages/tex.scm:593 +#: gnu/packages/tex.scm:613 msgid "Computer Modern fonts for TeX" msgstr "" -#: gnu/packages/tex.scm:594 +#: gnu/packages/tex.scm:614 msgid "" "This package provides the Computer Modern fonts by Donald\n" "Knuth. The Computer Modern font family is a large collection of text,\n" @@ -16076,22 +17114,22 @@ msgid "" "8A." msgstr "" -#: gnu/packages/tex.scm:658 +#: gnu/packages/tex.scm:678 msgid "Small library of METAFONT sources" msgstr "" -#: gnu/packages/tex.scm:659 +#: gnu/packages/tex.scm:679 msgid "" "This is a collection of core TeX and METAFONT macro files\n" "from Donald Knuth, including the plain format, plain base, and the MF logo\n" "fonts." msgstr "" -#: gnu/packages/tex.scm:732 +#: gnu/packages/tex.scm:753 msgid "Collection of fonts used in LaTeX distributions" msgstr "" -#: gnu/packages/tex.scm:733 +#: gnu/packages/tex.scm:754 msgid "" "This is a collection of fonts for use with standard LaTeX\n" "packages and classes. It includes invisible fonts (for use with the slides\n" @@ -16099,11 +17137,11 @@ msgid "" "symbol fonts." msgstr "" -#: gnu/packages/tex.scm:813 gnu/packages/tex.scm:844 +#: gnu/packages/tex.scm:835 gnu/packages/tex.scm:866 msgid "TeX fonts from the American Mathematical Society" msgstr "" -#: gnu/packages/tex.scm:815 +#: gnu/packages/tex.scm:837 msgid "" "This package provides an extended set of fonts for use in mathematics,\n" "including: extra mathematical symbols; blackboard bold letters (uppercase\n" @@ -16117,29 +17155,29 @@ msgid "" "details can be found in the documentation." msgstr "" -#: gnu/packages/tex.scm:846 +#: gnu/packages/tex.scm:868 msgid "" "This package provides basic LaTeX support for the symbol fonts provides\n" "by the amsfonts package. It provides @code{amsfonts.sty}, with names of\n" "individual symbols defined in @code{amssymb.sty}." msgstr "" -#: gnu/packages/tex.scm:880 +#: gnu/packages/tex.scm:902 msgid "Plain TeX format and supporting files" msgstr "" -#: gnu/packages/tex.scm:882 +#: gnu/packages/tex.scm:904 msgid "" "Contains files used to build the Plain TeX format, as described in the\n" "TeXbook, together with various supporting files (some also discussed in the\n" "book)." msgstr "" -#: gnu/packages/tex.scm:1032 +#: gnu/packages/tex.scm:1073 msgid "Base sources of LaTeX" msgstr "" -#: gnu/packages/tex.scm:1034 +#: gnu/packages/tex.scm:1075 msgid "" "This bundle comprises the source of LaTeX itself, together with several\n" "packages which are considered \"part of the kernel\". This bundle, together\n" @@ -16147,11 +17185,11 @@ msgid "" "contain." msgstr "" -#: gnu/packages/tex.scm:1054 +#: gnu/packages/tex.scm:1095 msgid "Extended filecontents and filecontents* environments" msgstr "" -#: gnu/packages/tex.scm:1056 +#: gnu/packages/tex.scm:1097 msgid "" "LaTeX2e's @code{filecontents} and @code{filecontents*} environments\n" "enable a LaTeX source file to generate external files as it runs through\n" @@ -16162,22 +17200,22 @@ msgid "" "@code{filecontents*} anywhere." msgstr "" -#: gnu/packages/tex.scm:1083 +#: gnu/packages/tex.scm:1124 msgid "Am I running under XeTeX?" msgstr "" -#: gnu/packages/tex.scm:1085 +#: gnu/packages/tex.scm:1126 msgid "" "This is a simple package which provides an @code{\\ifxetex} conditional,\n" "so that other code can determine that it is running under XeTeX. The package\n" "requires the e-TeX extensions to the TeX primitive set." msgstr "" -#: gnu/packages/tex.scm:1117 +#: gnu/packages/tex.scm:1158 msgid "Simple macros for EPS inclusion" msgstr "" -#: gnu/packages/tex.scm:1119 +#: gnu/packages/tex.scm:1160 msgid "" "This package provides the original (and now obsolescent) graphics\n" "inclusion macros for use with dvips, still widely used by Plain TeX users (in\n" @@ -16187,11 +17225,11 @@ msgid "" "users, via its Plain TeX version.)" msgstr "" -#: gnu/packages/tex.scm:1145 +#: gnu/packages/tex.scm:1186 msgid "Sophisticated verbatim text" msgstr "" -#: gnu/packages/tex.scm:1147 +#: gnu/packages/tex.scm:1188 msgid "" "This package provides tools for the flexible handling of verbatim text\n" "including: verbatim commands in footnotes; a variety of verbatim environments\n" @@ -16201,11 +17239,11 @@ msgid "" "verbatim source)." msgstr "" -#: gnu/packages/tex.scm:1216 +#: gnu/packages/tex.scm:1257 msgid "LaTeX standard graphics bundle" msgstr "" -#: gnu/packages/tex.scm:1218 +#: gnu/packages/tex.scm:1259 msgid "" "This is a collection of LaTeX packages for producing color, including\n" "graphics (e.g. PostScript) files, and rotation and scaling of text in LaTeX\n" @@ -16213,11 +17251,11 @@ msgid "" "keyval, and lscape." msgstr "" -#: gnu/packages/tex.scm:1240 +#: gnu/packages/tex.scm:1281 msgid "Driver-independent color extensions for LaTeX and pdfLaTeX" msgstr "" -#: gnu/packages/tex.scm:1242 +#: gnu/packages/tex.scm:1283 msgid "" "The package starts from the basic facilities of the colorcolor package,\n" "and provides easy driver-independent access to several kinds of color tints,\n" @@ -16228,11 +17266,11 @@ msgid "" "tables." msgstr "" -#: gnu/packages/tex.scm:1268 +#: gnu/packages/tex.scm:1309 msgid "Extensive support for hypertext in LaTeX" msgstr "" -#: gnu/packages/tex.scm:1270 +#: gnu/packages/tex.scm:1311 msgid "" "The @code{hyperref} package is used to handle cross-referencing commands\n" "in LaTeX to produce hypertext links in the document. The package provides\n" @@ -16244,22 +17282,22 @@ msgid "" "@code{nameref} packages, which make use of the facilities of @code{hyperref}." msgstr "" -#: gnu/packages/tex.scm:1304 +#: gnu/packages/tex.scm:1345 msgid "Bundle of packages submitted by Heiko Oberdiek" msgstr "" -#: gnu/packages/tex.scm:1306 +#: gnu/packages/tex.scm:1347 msgid "" "The bundle comprises various LaTeX packages, providing among others:\n" "better accessibility support for PDF files; extensible chemists reaction\n" "arrows; record information about document class(es) used; and many more." msgstr "" -#: gnu/packages/tex.scm:1327 +#: gnu/packages/tex.scm:1368 msgid "LaTeX standard tools bundle" msgstr "" -#: gnu/packages/tex.scm:1329 +#: gnu/packages/tex.scm:1370 msgid "" "This package is a collection of (variously) simple tools provided as\n" "part of the LaTeX required tools distribution, comprising the following\n" @@ -16269,11 +17307,11 @@ msgid "" "xr, and xspace." msgstr "" -#: gnu/packages/tex.scm:1364 +#: gnu/packages/tex.scm:1405 msgid "Verbatim with URL-sensitive line breaks" msgstr "" -#: gnu/packages/tex.scm:1365 +#: gnu/packages/tex.scm:1406 msgid "" "The command @code{\\url} is a form of verbatim command that\n" "allows linebreaks at certain characters or combinations of characters, accepts\n" @@ -16285,11 +17323,11 @@ msgid "" "of file names." msgstr "" -#: gnu/packages/tex.scm:1392 +#: gnu/packages/tex.scm:1433 msgid "LaTeX3 programmers’ interface" msgstr "" -#: gnu/packages/tex.scm:1394 +#: gnu/packages/tex.scm:1435 msgid "" "The l3kernel bundle provides an implementation of the LaTeX3\n" "programmers’ interface, as a set of packages that run under LaTeX 2e. The\n" @@ -16298,11 +17336,11 @@ msgid "" "that the LaTeX3 conventions can be used with regular LaTeX 2e packages." msgstr "" -#: gnu/packages/tex.scm:1432 +#: gnu/packages/tex.scm:1480 msgid "High-level LaTeX3 concepts" msgstr "" -#: gnu/packages/tex.scm:1434 +#: gnu/packages/tex.scm:1482 msgid "" "This bundle holds prototype implementations of concepts for a LaTeX\n" "designer interface, to be used with the experimental LaTeX kernel as\n" @@ -16319,11 +17357,11 @@ msgid "" "@end enumerate\n" msgstr "" -#: gnu/packages/tex.scm:1467 +#: gnu/packages/tex.scm:1515 msgid "Advanced font selection in XeLaTeX and LuaLaTeX" msgstr "" -#: gnu/packages/tex.scm:1469 +#: gnu/packages/tex.scm:1517 msgid "" "Fontspec is a package for XeLaTeX and LuaLaTeX. It provides an\n" "automatic and unified interface to feature-rich AAT and OpenType fonts through\n" @@ -16331,22 +17369,22 @@ msgid "" "the l3kernel and xparse bundles from the LaTeX 3 development team." msgstr "" -#: gnu/packages/tex.scm:1505 +#: gnu/packages/tex.scm:1553 msgid "Lua modules for general programming (in the (La)TeX world)" msgstr "" -#: gnu/packages/tex.scm:1507 +#: gnu/packages/tex.scm:1555 msgid "" "Lualibs is a collection of Lua modules useful for general programming.\n" "The bundle is based on Lua modules shipped with ConTeXt, and made available in\n" "this bundle for use independent of ConTeXt." msgstr "" -#: gnu/packages/tex.scm:1527 +#: gnu/packages/tex.scm:1575 msgid "AMS mathematical facilities for LaTeX" msgstr "" -#: gnu/packages/tex.scm:1529 +#: gnu/packages/tex.scm:1577 msgid "" "This is the principal package in the AMS-LaTeX distribution. It adapts\n" "for use in LaTeX most of the mathematical features found in AMS-TeX; it is\n" @@ -16361,11 +17399,11 @@ msgid "" "definitions." msgstr "" -#: gnu/packages/tex.scm:1557 +#: gnu/packages/tex.scm:1605 msgid "AMS document classes for LaTeX" msgstr "" -#: gnu/packages/tex.scm:1559 +#: gnu/packages/tex.scm:1607 msgid "" "This bundle contains three AMS classes: @code{amsartamsart} (for writing\n" "articles for the AMS), @code{amsbookamsbook} (for books) and\n" @@ -16374,11 +17412,11 @@ msgid "" "distribution." msgstr "" -#: gnu/packages/tex.scm:1590 +#: gnu/packages/tex.scm:1638 msgid "Multilingual support for Plain TeX or LaTeX" msgstr "" -#: gnu/packages/tex.scm:1592 +#: gnu/packages/tex.scm:1640 msgid "" "The package manages culturally-determined typographical (and other)\n" "rules, and hyphenation patterns for a wide range of languages. A document may\n" @@ -16389,11 +17427,11 @@ msgid "" "polyglossia package rather than Babel." msgstr "" -#: gnu/packages/tex.scm:1615 +#: gnu/packages/tex.scm:1663 msgid "Babel support for English" msgstr "" -#: gnu/packages/tex.scm:1617 +#: gnu/packages/tex.scm:1665 msgid "" "This package provides the language definition file for support of\n" "English in @code{babel}. Care is taken to select British hyphenation patterns\n" @@ -16401,11 +17439,11 @@ msgid "" "for Canadian and USA text." msgstr "" -#: gnu/packages/tex.scm:1638 +#: gnu/packages/tex.scm:1686 msgid "Support for Cyrillic fonts in LaTeX" msgstr "" -#: gnu/packages/tex.scm:1640 +#: gnu/packages/tex.scm:1688 msgid "" "This bundle of macros files provides macro support (including font\n" "encoding macros) for the use of Cyrillic characters in fonts encoded under the\n" @@ -16413,11 +17451,11 @@ msgid "" "language that is written in a Cyrillic alphabet." msgstr "" -#: gnu/packages/tex.scm:1660 +#: gnu/packages/tex.scm:1708 msgid "Font support for common PostScript fonts" msgstr "" -#: gnu/packages/tex.scm:1662 +#: gnu/packages/tex.scm:1710 msgid "" "The PSNFSS collection includes a set of files that provide a complete\n" "working setup of the LaTeX font selection scheme (NFSS2) for use with common\n" @@ -16428,11 +17466,11 @@ msgid "" "packages." msgstr "" -#: gnu/packages/tex.scm:1747 +#: gnu/packages/tex.scm:1795 msgid "Union of TeX Live packages" msgstr "" -#: gnu/packages/tex.scm:1748 +#: gnu/packages/tex.scm:1796 msgid "" "This package provides a subset of the TeX Live\n" "distribution." @@ -16440,17 +17478,17 @@ msgstr "" "Denne pakke tilbyder et undersæt af TeX Live-\n" "distributionen." -#: gnu/packages/tex.scm:1763 +#: gnu/packages/tex.scm:1811 msgid "" "This is a very limited subset of the TeX Live distribution.\n" "It includes little more than the required set of LaTeX packages." msgstr "" -#: gnu/packages/tex.scm:1780 +#: gnu/packages/tex.scm:1828 msgid "LaTeX-based replacement for BibTeX" msgstr "LaTeX-baseret erstatning for BibTeX" -#: gnu/packages/tex.scm:1782 +#: gnu/packages/tex.scm:1830 msgid "" "Amsrefs is a LaTeX package for bibliographies that provides an archival\n" "data format similar to the format of BibTeX database files, but adapted to\n" @@ -16458,11 +17496,11 @@ msgid "" "conjunction with BibTeX or as a replacement for BibTeX." msgstr "" -#: gnu/packages/tex.scm:1809 +#: gnu/packages/tex.scm:1857 msgid "Footnotes for critical editions" msgstr "" -#: gnu/packages/tex.scm:1811 +#: gnu/packages/tex.scm:1859 msgid "" "This package aims to provide a one-stop solution to requirements for\n" "footnotes. It offers: Multiple footnote apparatus superior to that of\n" @@ -16476,11 +17514,11 @@ msgid "" "@code{suffix} packages." msgstr "" -#: gnu/packages/tex.scm:1837 +#: gnu/packages/tex.scm:1885 msgid "Producing 'blind' text for testing" msgstr "" -#: gnu/packages/tex.scm:1839 +#: gnu/packages/tex.scm:1887 msgid "" "The package provides the commands @code{\\blindtext} and\n" "@code{\\Blindtext} for creating \"blind\" text useful in testing new classes\n" @@ -16491,11 +17529,11 @@ msgid "" "ipsum\" text, see the @code{lipsum} package)." msgstr "" -#: gnu/packages/tex.scm:1869 +#: gnu/packages/tex.scm:1917 msgid "German letter DIN style" msgstr "" -#: gnu/packages/tex.scm:1871 +#: gnu/packages/tex.scm:1919 msgid "" "This package implements a document layout for writing letters according\n" "to the rules of DIN (Deutsches Institut für Normung, German standardisation\n" @@ -16507,11 +17545,11 @@ msgid "" "package." msgstr "" -#: gnu/packages/tex.scm:1895 +#: gnu/packages/tex.scm:1943 msgid "Put a grey textual watermark on document pages" msgstr "" -#: gnu/packages/tex.scm:1897 +#: gnu/packages/tex.scm:1945 msgid "" "This package provides a means to add a textual, light grey watermark on\n" "every page or on the first page of a document. Typical usage may consist in\n" @@ -16521,11 +17559,11 @@ msgid "" "on everypage." msgstr "" -#: gnu/packages/tex.scm:1919 +#: gnu/packages/tex.scm:1967 msgid "New interface for environments in LaTeX" msgstr "" -#: gnu/packages/tex.scm:1921 +#: gnu/packages/tex.scm:1969 msgid "" "This package provides the @code{\\collect@@body} command (as in\n" "@code{amsmath}), as well as a @code{\\long} version @code{\\Collect@@Body},\n" @@ -16533,11 +17571,11 @@ msgid "" "define a new author interface to creating new environments." msgstr "" -#: gnu/packages/tex.scm:1941 +#: gnu/packages/tex.scm:1989 msgid "Create equal-widthed parboxes" msgstr "" -#: gnu/packages/tex.scm:1943 +#: gnu/packages/tex.scm:1991 msgid "" "LaTeX users sometimes need to ensure that two or more blocks of text\n" "occupy the same amount of horizontal space on the page. To that end, the\n" @@ -16551,11 +17589,11 @@ msgid "" "also provided." msgstr "" -#: gnu/packages/tex.scm:1977 +#: gnu/packages/tex.scm:2025 msgid "Expanded description environments" msgstr "Udvidede beskrivelsesmiljøer" -#: gnu/packages/tex.scm:1979 +#: gnu/packages/tex.scm:2027 msgid "" "The package provides additional features for the LaTeX\n" "@code{description} environment, including adjustable left margin. The package\n" @@ -16564,11 +17602,11 @@ msgid "" "@code{enumerate} lists, and numbered lists remain in sequence)." msgstr "" -#: gnu/packages/tex.scm:2013 +#: gnu/packages/tex.scm:2061 msgid "Provide file modification times, and compare them" msgstr "" -#: gnu/packages/tex.scm:2015 +#: gnu/packages/tex.scm:2063 msgid "" "This package provides macros to read and compare the modification dates\n" "of files. The files may be @code{.tex} files, images or other files (as long\n" @@ -16580,11 +17618,11 @@ msgid "" "but non-expandable ones." msgstr "" -#: gnu/packages/tex.scm:2039 +#: gnu/packages/tex.scm:2087 msgid "Conditionals to test which platform is being used" msgstr "" -#: gnu/packages/tex.scm:2041 +#: gnu/packages/tex.scm:2089 msgid "" "This package uses the (La)TeX extension @code{-shell-escape} to\n" "establish whether the document is being processed on a Windows or on a\n" @@ -16595,11 +17633,11 @@ msgid "" "classes of systems." msgstr "" -#: gnu/packages/tex.scm:2064 +#: gnu/packages/tex.scm:2112 msgid "Flexible bibliography support" msgstr "" -#: gnu/packages/tex.scm:2066 +#: gnu/packages/tex.scm:2114 msgid "" "This bundle provides a package that implements both author-year and\n" "numbered references, as well as much detailed of support for other\n" @@ -16609,11 +17647,11 @@ msgid "" "designed from the start to be compatible with @code{natbib}." msgstr "" -#: gnu/packages/tex.scm:2088 +#: gnu/packages/tex.scm:2136 msgid "Replace strings in encapsulated PostScript figures" msgstr "" -#: gnu/packages/tex.scm:2090 +#: gnu/packages/tex.scm:2138 msgid "" "This package allows LaTeX constructions (equations, picture\n" "environments, etc.) to be precisely superimposed over Encapsulated PostScript\n" @@ -16624,11 +17662,11 @@ msgid "" "rotated." msgstr "" -#: gnu/packages/tex.scm:2126 +#: gnu/packages/tex.scm:2174 msgid "Process PostScript graphisc within pdfLaTeX documents" msgstr "" -#: gnu/packages/tex.scm:2128 +#: gnu/packages/tex.scm:2176 msgid "" "This is a package for processing PostScript graphics with @code{psfrag}\n" "labels within pdfLaTeX documents. Every graphic is compiled individually,\n" @@ -16636,11 +17674,11 @@ msgid "" "re-processing." msgstr "" -#: gnu/packages/tex.scm:2152 +#: gnu/packages/tex.scm:2200 msgid "Make overhead slides" msgstr "" -#: gnu/packages/tex.scm:2155 +#: gnu/packages/tex.scm:2203 msgid "" "This package provides a class that produces overhead\n" "slides (transparencies), with many facilities. Seminar is not nowadays\n" @@ -16649,11 +17687,11 @@ msgid "" "21st-century presentation styles." msgstr "" -#: gnu/packages/tex.scm:2188 +#: gnu/packages/tex.scm:2236 msgid "Trim spaces around an argument or within a macro" msgstr "" -#: gnu/packages/tex.scm:2190 +#: gnu/packages/tex.scm:2238 msgid "" "This very short package allows you to expandably remove spaces around a\n" "token list (commands are provided to remove spaces before, spaces after, or\n" @@ -16661,21 +17699,35 @@ msgid "" "space-stripped macros." msgstr "" -#: gnu/packages/tex.scm:2223 +#: gnu/packages/tex.scm:2271 msgid "Captions on more than floats" msgstr "" -#: gnu/packages/tex.scm:2225 +#: gnu/packages/tex.scm:2273 msgid "" "This package defines a command @code{\\captionof} for putting a caption\n" "to something that's not a float." msgstr "" -#: gnu/packages/tex.scm:2256 +#: gnu/packages/tex.scm:2304 +msgid "Create correct hyperlinks for DOI numbers" +msgstr "" + +#: gnu/packages/tex.scm:2306 +msgid "" +"You can hyperlink DOI numbers to doi.org. However, some publishers have\n" +"elected to use nasty characters in their DOI numbering scheme (@code{<},\n" +"@code{>}, @code{_} and @code{;} have all been spotted). This will either\n" +"upset LaTeX, or your PDF reader. This package contains a single user-level\n" +"command @code{\\doi{}}, which takes a DOI number, and creates a correct\n" +"hyperlink to the target of the DOI." +msgstr "" + +#: gnu/packages/tex.scm:2342 msgid "e-TeX tools for LaTeX" msgstr "e-TeX-værktøjer for LaTeX" -#: gnu/packages/tex.scm:2258 +#: gnu/packages/tex.scm:2344 msgid "" "This package is a toolbox of programming facilities geared primarily\n" "towards LaTeX class and package authors. It provides LaTeX frontends to some\n" @@ -16686,11 +17738,11 @@ msgid "" "of the LaTeX kernel." msgstr "" -#: gnu/packages/tex.scm:2294 +#: gnu/packages/tex.scm:2380 msgid "Seven predefined chapter heading styles" msgstr "" -#: gnu/packages/tex.scm:2296 +#: gnu/packages/tex.scm:2382 msgid "" "This package provides seven predefined chapter heading styles. Each\n" "style can be modified using a set of simple commands. Optionally one can\n" @@ -16698,11 +17750,11 @@ msgid "" "headings." msgstr "" -#: gnu/packages/tex.scm:2329 +#: gnu/packages/tex.scm:2415 msgid "Framed or shaded regions that can break across pages" msgstr "" -#: gnu/packages/tex.scm:2331 +#: gnu/packages/tex.scm:2417 msgid "" "The package creates three environments: @code{framed}, which puts an\n" "ordinary frame box around the region, @code{shaded}, which shades the region,\n" @@ -16713,11 +17765,11 @@ msgid "" "@code{\\MakeFramed} to make your own framed-style environments." msgstr "" -#: gnu/packages/tex.scm:2363 +#: gnu/packages/tex.scm:2449 msgid "Letter document class" msgstr "" -#: gnu/packages/tex.scm:2365 +#: gnu/packages/tex.scm:2451 msgid "" "This package is designed for formatting formless letters in German; it\n" "can also be used for English (by those who can read the documentation). There\n" @@ -16725,21 +17777,21 @@ msgid "" "\"old\" and a \"new\" version of g-brief." msgstr "" -#: gnu/packages/tex.scm:2385 +#: gnu/packages/tex.scm:2471 msgid "Typeset Galois connections" msgstr "" -#: gnu/packages/tex.scm:2387 +#: gnu/packages/tex.scm:2473 msgid "" "The package deals with connections in two-dimensional style, optionally\n" "in colour." msgstr "" -#: gnu/packages/tex.scm:2405 +#: gnu/packages/tex.scm:2491 msgid "Citations in a reader-friendly style" msgstr "" -#: gnu/packages/tex.scm:2407 +#: gnu/packages/tex.scm:2493 msgid "" "The package allows citations in the German style, which is considered by\n" "many to be particularly reader-friendly. The citation provides a small amount\n" @@ -16749,11 +17801,11 @@ msgid "" "BibLaTeX, and is considered experimental." msgstr "" -#: gnu/packages/tex.scm:2429 +#: gnu/packages/tex.scm:2515 msgid "Flexible and complete interface to document dimensions" msgstr "" -#: gnu/packages/tex.scm:2431 +#: gnu/packages/tex.scm:2517 msgid "" "This package provides an easy and flexible user interface to customize\n" "page layout, implementing auto-centering and auto-balancing mechanisms so that\n" @@ -16764,11 +17816,11 @@ msgid "" "ability to communicate the paper size it's set up to the output." msgstr "" -#: gnu/packages/tex.scm:2454 +#: gnu/packages/tex.scm:2540 msgid "Miscellaneous tools by Mark Wooding" msgstr "" -#: gnu/packages/tex.scm:2456 +#: gnu/packages/tex.scm:2542 msgid "" "This collection of tools includes: @code{atsupport} for short commands\n" "starting with @code{@@}, macros to sanitize the OT1 encoding of the\n" @@ -16778,21 +17830,21 @@ msgid "" "array environments; verbatim handling; and syntax diagrams." msgstr "" -#: gnu/packages/tex.scm:2478 +#: gnu/packages/tex.scm:2564 msgid "Alternative to babel for XeLaTeX and LuaLaTeX" msgstr "" -#: gnu/packages/tex.scm:2480 +#: gnu/packages/tex.scm:2566 msgid "" "This package provides a complete Babel replacement for users of LuaLaTeX\n" "and XeLaTeX; it relies on the @code{fontspec} package, version 2.0 at least." msgstr "" -#: gnu/packages/tex.scm:2498 +#: gnu/packages/tex.scm:2584 msgid "Multi-page tables package" msgstr "" -#: gnu/packages/tex.scm:2500 +#: gnu/packages/tex.scm:2586 msgid "" "This package was a predecessor of @code{longtable}; the newer\n" "package (designed on quite different principles) is easier to use and more\n" @@ -16800,11 +17852,11 @@ msgid "" "situations where longtable has problems." msgstr "" -#: gnu/packages/tex.scm:2533 +#: gnu/packages/tex.scm:2619 msgid "TeX macros to handle Texinfo files" msgstr "" -#: gnu/packages/tex.scm:2535 +#: gnu/packages/tex.scm:2621 msgid "" "Texinfo is the preferred format for documentation in the GNU project;\n" "the format may be used to produce online or printed output from a single\n" @@ -16813,11 +17865,11 @@ msgid "" "hypertext linkages in some cases)." msgstr "" -#: gnu/packages/tex.scm:2556 +#: gnu/packages/tex.scm:2642 msgid "Show \"realistic\" quotes in verbatim" msgstr "" -#: gnu/packages/tex.scm:2558 +#: gnu/packages/tex.scm:2644 msgid "" "Typewriter-style fonts are best for program listings, but Computer\n" "Modern Typewriter prints @code{`} and @code{'} as bent opening and closing\n" @@ -16831,22 +17883,22 @@ msgid "" "does not affect @code{\\tt}, @code{\\texttt}, etc." msgstr "" -#: gnu/packages/tex.scm:2597 +#: gnu/packages/tex.scm:2683 msgid "Simple package to set up document margins" msgstr "" -#: gnu/packages/tex.scm:2599 +#: gnu/packages/tex.scm:2685 msgid "" "This is a simple package to set up document margins. This package is\n" "considered obsolete; alternatives are the @code{typearea} package from the\n" "@code{koma-script} bundle, or the @code{geometry} package." msgstr "" -#: gnu/packages/tex.scm:2618 +#: gnu/packages/tex.scm:2704 msgid "Extra control of appendices" msgstr "" -#: gnu/packages/tex.scm:2620 +#: gnu/packages/tex.scm:2706 msgid "" "The appendix package provides various ways of formatting the titles of\n" "appendices. Also (sub)appendices environments are provided that can be used,\n" @@ -16855,11 +17907,11 @@ msgid "" "command." msgstr "" -#: gnu/packages/tex.scm:2641 +#: gnu/packages/tex.scm:2727 msgid "Generate changebars in LaTeX documents" msgstr "" -#: gnu/packages/tex.scm:2643 +#: gnu/packages/tex.scm:2729 msgid "" "Identify areas of text to be marked with changebars with the\n" "@code{\\cbstart} and @code{\\cbend} commands; the bars may be coloured. The\n" @@ -16868,31 +17920,31 @@ msgid "" "drivers, and VTeX and pdfTeX." msgstr "" -#: gnu/packages/tex.scm:2678 +#: gnu/packages/tex.scm:2764 msgid "CMap support for PDF files" msgstr "" -#: gnu/packages/tex.scm:2680 +#: gnu/packages/tex.scm:2766 msgid "" "This package embeds CMap tables into PDF files to make search and\n" "copy-and-paste functions work properly." msgstr "" -#: gnu/packages/tex.scm:2698 +#: gnu/packages/tex.scm:2784 msgid "Add colour to LaTeX tables" msgstr "" -#: gnu/packages/tex.scm:2700 +#: gnu/packages/tex.scm:2786 msgid "" "This package allows rows, columns, and even individual cells in LaTeX\n" "tables to be coloured." msgstr "" -#: gnu/packages/tex.scm:2731 +#: gnu/packages/tex.scm:2817 msgid "Variants of \\fbox and other games with boxes" msgstr "" -#: gnu/packages/tex.scm:2733 +#: gnu/packages/tex.scm:2819 msgid "" "This package provides variants of @code{\\fbox}: @code{\\shadowbox},\n" "@code{\\doublebox}, @code{\\ovalbox}, @code{\\Ovalbox}, with helpful tools for\n" @@ -16900,22 +17952,22 @@ msgid "" "floats, center, flushleft, and flushright, lists, and pages." msgstr "" -#: gnu/packages/tex.scm:2766 +#: gnu/packages/tex.scm:2852 msgid "Extensive control of page headers and footers in LaTeX2e" msgstr "" -#: gnu/packages/tex.scm:2768 +#: gnu/packages/tex.scm:2854 msgid "" "The package provides extensive facilities, both for constructing headers\n" "and footers, and for controlling their use (for example, at times when LaTeX\n" "would automatically change the heading style in use)." msgstr "" -#: gnu/packages/tex.scm:2787 +#: gnu/packages/tex.scm:2873 msgid "Improved interface for floating objects" msgstr "" -#: gnu/packages/tex.scm:2789 +#: gnu/packages/tex.scm:2875 msgid "" "This package improves the interface for defining floating objects such\n" "as figures and tables. It introduces the boxed float, the ruled float and the\n" @@ -16925,11 +17977,11 @@ msgid "" "with @code{\\floatplacement{figure}{H}}." msgstr "" -#: gnu/packages/tex.scm:2811 +#: gnu/packages/tex.scm:2897 msgid "Range of footnote options" msgstr "" -#: gnu/packages/tex.scm:2813 +#: gnu/packages/tex.scm:2899 msgid "" "This is a collection of ways to change the typesetting of footnotes.\n" "The package provides means of changing the layout of the footnotes themselves,\n" @@ -16939,11 +17991,11 @@ msgid "" "footnotes with symbols rather than numbers." msgstr "" -#: gnu/packages/tex.scm:2837 +#: gnu/packages/tex.scm:2923 msgid "Typeset source code listings using LaTeX" msgstr "" -#: gnu/packages/tex.scm:2839 +#: gnu/packages/tex.scm:2925 msgid "" "The package enables the user to typeset programs (programming code)\n" "within LaTeX; the source code is read directly by TeX---no front-end processor\n" @@ -16951,11 +18003,11 @@ msgid "" "styles. Support for @code{hyperref} is provided." msgstr "" -#: gnu/packages/tex.scm:2872 +#: gnu/packages/tex.scm:2958 msgid "Miscellaneous packages by Joerg Knappen" msgstr "" -#: gnu/packages/tex.scm:2874 +#: gnu/packages/tex.scm:2960 msgid "" "This package provides miscellaneous macros by Joerg Knappen, including:\n" "represent counters in greek; Maxwell's non-commutative division;\n" @@ -16967,11 +18019,11 @@ msgid "" "in SGML; use maths minus in text as appropriate; simple Young tableaux." msgstr "" -#: gnu/packages/tex.scm:2948 +#: gnu/packages/tex.scm:3035 msgid "Computer modern fonts in T1 and TS1 encodings" msgstr "" -#: gnu/packages/tex.scm:2950 +#: gnu/packages/tex.scm:3037 msgid "" "The EC fonts are European Computer Modern Fonts, supporting the complete\n" "LaTeX T1 encoding defined at the 1990 TUG conference hold at Cork/Ireland.\n" @@ -16988,11 +18040,11 @@ msgid "" "differs from the EC in a number of particulars." msgstr "" -#: gnu/packages/tex.scm:3030 +#: gnu/packages/tex.scm:3118 msgid "Ralph Smith's Formal Script font" msgstr "" -#: gnu/packages/tex.scm:3032 +#: gnu/packages/tex.scm:3120 msgid "" "The fonts provide uppercase formal script letters for use as symbols in\n" "scientific and mathematical typesetting (in contrast to the informal script\n" @@ -17002,22 +18054,22 @@ msgid "" "one of the packages @code{calrsfs} and @code{mathrsfs}." msgstr "" -#: gnu/packages/tex.scm:3054 +#: gnu/packages/tex.scm:3142 msgid "Add picture commands (or backgrounds) to every page" msgstr "" -#: gnu/packages/tex.scm:3056 +#: gnu/packages/tex.scm:3144 msgid "" "The package adds one or more user commands to LaTeX's @code{shipout}\n" "routine, which may be used to place the output at fixed positions. The\n" "@code{grid} option may be used to find the correct places." msgstr "" -#: gnu/packages/tex.scm:3088 +#: gnu/packages/tex.scm:3176 msgid "Extensions to epic and the LaTeX drawing tools" msgstr "" -#: gnu/packages/tex.scm:3090 +#: gnu/packages/tex.scm:3178 msgid "" "Extensions to @code{epic} and the LaTeX picture drawing environment,\n" "include the drawing of lines at any slope, the drawing of circles in any\n" @@ -17027,11 +18079,11 @@ msgid "" "@code{\\special} commands." msgstr "" -#: gnu/packages/tex.scm:3125 +#: gnu/packages/tex.scm:3213 msgid "Customize basic list environments" msgstr "" -#: gnu/packages/tex.scm:3127 +#: gnu/packages/tex.scm:3215 msgid "" "This package is intended to ease customizing the three basic list\n" "environments: @code{enumerate}, @code{itemize} and @code{description}. It\n" @@ -17040,22 +18092,22 @@ msgid "" "@code{\\begin{itemize}[itemsep=1ex,leftmargin=1cm]}." msgstr "" -#: gnu/packages/tex.scm:3148 +#: gnu/packages/tex.scm:3236 msgid "Create tabular cells spanning multiple rows" msgstr "" -#: gnu/packages/tex.scm:3150 +#: gnu/packages/tex.scm:3238 msgid "" "The package provides tools for creating tabular cells spanning multiple\n" "rows. It has a lot of flexibility, including an option for specifying an\n" "entry at the \"natural\" width of its text." msgstr "" -#: gnu/packages/tex.scm:3182 +#: gnu/packages/tex.scm:3270 msgid "Combine LaTeX commands over included graphics" msgstr "" -#: gnu/packages/tex.scm:3184 +#: gnu/packages/tex.scm:3272 msgid "" "The @code{overpic} environment is a cross between the LaTeX\n" "@code{picture} environment and the @code{\\includegraphics} command of\n" @@ -17064,22 +18116,22 @@ msgid "" "positions; a grid for orientation is available." msgstr "" -#: gnu/packages/tex.scm:3218 +#: gnu/packages/tex.scm:3306 msgid "Layout with zero \\parindent, non-zero \\parskip" msgstr "" -#: gnu/packages/tex.scm:3220 +#: gnu/packages/tex.scm:3308 msgid "" "Simply changing @code{\\parskip} and @code{\\parindent} leaves a layout\n" "that is untidy; this package (though it is no substitute for a properly\n" "designed class) helps alleviate this untidiness." msgstr "" -#: gnu/packages/tex.scm:3239 +#: gnu/packages/tex.scm:3327 msgid "Include PDF documents in LaTeX" msgstr "" -#: gnu/packages/tex.scm:3241 +#: gnu/packages/tex.scm:3329 msgid "" "This package simplifies the inclusion of external multi-page PDF\n" "documents in LaTeX documents. Pages may be freely selected and it is possible\n" @@ -17089,11 +18141,11 @@ msgid "" "use this package to insert PostScript files, in addition to PDF files." msgstr "" -#: gnu/packages/tex.scm:3273 +#: gnu/packages/tex.scm:3361 msgid "St Mary Road symbols for theoretical computer science" msgstr "" -#: gnu/packages/tex.scm:3275 +#: gnu/packages/tex.scm:3363 msgid "" "The fonts were originally distributed as Metafont sources only, but\n" "Adobe Type 1 versions are also now available. Macro support is provided for\n" @@ -17102,11 +18154,11 @@ msgid "" "the whole font." msgstr "" -#: gnu/packages/tex.scm:3296 +#: gnu/packages/tex.scm:3384 msgid "Figures divided into subfigures" msgstr "" -#: gnu/packages/tex.scm:3298 +#: gnu/packages/tex.scm:3386 msgid "" "This (deprecated) package provides support for the manipulation and\n" "reference of small or \"sub\" figures and tables within a single figure or\n" @@ -17119,11 +18171,11 @@ msgid "" "the more recent @code{subcaption} package more satisfactory." msgstr "" -#: gnu/packages/tex.scm:3323 +#: gnu/packages/tex.scm:3411 msgid "Tabular with variable width columns balanced" msgstr "" -#: gnu/packages/tex.scm:3325 +#: gnu/packages/tex.scm:3413 msgid "" "The package defines a @code{tabular*}-like environment, @code{tabulary},\n" "taking a \"total width\" argument as well as the column specifications. The\n" @@ -17134,11 +18186,11 @@ msgid "" "according to the natural width of the widest cell in the column." msgstr "" -#: gnu/packages/tex.scm:3361 +#: gnu/packages/tex.scm:3449 msgid "Tables with captions and notes all the same width" msgstr "" -#: gnu/packages/tex.scm:3363 +#: gnu/packages/tex.scm:3451 msgid "" "This package facilitates tables with titles (captions) and notes. The\n" "title and notes are given a width equal to the body of the table (a\n" @@ -17147,11 +18199,11 @@ msgid "" "environment." msgstr "" -#: gnu/packages/tex.scm:3484 +#: gnu/packages/tex.scm:3572 msgid "Times-like fonts in support of mathematics" msgstr "" -#: gnu/packages/tex.scm:3486 +#: gnu/packages/tex.scm:3574 msgid "" "Txfonts supplies virtual text roman fonts using Adobe Times (or URW\n" "NimbusRomNo9L) with some modified and additional text symbols in the OT1, T1,\n" @@ -17167,11 +18219,11 @@ msgid "" "TeX metrics (VF and TFM files) and macros for use with LaTeX." msgstr "" -#: gnu/packages/tex.scm:3532 +#: gnu/packages/tex.scm:3621 msgid "Sans-serif typeface for TeX" msgstr "" -#: gnu/packages/tex.scm:3533 +#: gnu/packages/tex.scm:3622 msgid "" "Iwona is a two-element sans-serif typeface. It was created\n" "as an alternative version of the Kurier typeface, which was designed in 1975\n" @@ -17182,11 +18234,11 @@ msgid "" "of ink traps which typify the Kurier font." msgstr "" -#: gnu/packages/tex.scm:3569 +#: gnu/packages/tex.scm:3658 msgid "Select alternative section titles" msgstr "" -#: gnu/packages/tex.scm:3571 +#: gnu/packages/tex.scm:3660 msgid "" "This package provides an interface to sectioning commands for selection\n" "from various title styles, e.g. for marginal titles and to change the font of\n" @@ -17195,11 +18247,11 @@ msgid "" "floats in a page. You may assign headers/footers to individual floats, too." msgstr "" -#: gnu/packages/tex.scm:3592 +#: gnu/packages/tex.scm:3681 msgid "Arbitrary size font selection in LaTeX" msgstr "" -#: gnu/packages/tex.scm:3594 +#: gnu/packages/tex.scm:3683 msgid "" "LaTeX, by default, restricts the sizes at which you can use its default\n" "computer modern fonts, to a fixed set of discrete sizes (effectively, a set\n" @@ -17214,11 +18266,11 @@ msgid "" "@code{ec} fonts." msgstr "" -#: gnu/packages/tex.scm:3621 +#: gnu/packages/tex.scm:3710 msgid "Cyrillic fonts that support LaTeX standard encodings" msgstr "" -#: gnu/packages/tex.scm:3623 +#: gnu/packages/tex.scm:3712 msgid "" "The LH fonts address the problem of the wide variety of alphabets that\n" "are written with Cyrillic-style characters. The fonts are the original basis\n" @@ -17231,43 +18283,43 @@ msgid "" "OT2 encoded fonts, CM bright shaped fonts and Concrete shaped fonts." msgstr "" -#: gnu/packages/tex.scm:3661 +#: gnu/packages/tex.scm:3750 msgid "Create scalable illustrations" msgstr "Opret skalerbare illustrationer" -#: gnu/packages/tex.scm:3663 +#: gnu/packages/tex.scm:3752 msgid "" "MetaPost uses a language based on that of Metafont to produce precise\n" "technical illustrations. Its output is scalable PostScript or SVG, rather\n" "than the bitmaps Metafont creates." msgstr "" -#: gnu/packages/tex.scm:3682 +#: gnu/packages/tex.scm:3771 msgid "Class for typesetting publications of ACM" msgstr "Klasse til opsætning af ACM-udgivelser" -#: gnu/packages/tex.scm:3684 +#: gnu/packages/tex.scm:3773 msgid "" "This package provides a class for typesetting publications of the\n" "Association for Computing Machinery (ACM)." msgstr "" -#: gnu/packages/tex.scm:3715 +#: gnu/packages/tex.scm:3804 msgid "Variable-width minipage" msgstr "" -#: gnu/packages/tex.scm:3717 +#: gnu/packages/tex.scm:3806 msgid "" "The @code{varwidth} environment is superficially similar to\n" "@code{minipage}, but the specified width is just a maximum value — the box may\n" "get a narrower “natural” width." msgstr "" -#: gnu/packages/tex.scm:3736 +#: gnu/packages/tex.scm:3825 msgid "LaTeX support file to use the WASY2 fonts" msgstr "" -#: gnu/packages/tex.scm:3738 +#: gnu/packages/tex.scm:3827 msgid "" "The wasy2WASY2 (Waldi Symbol) font by Roland Waldi provides many glyphs\n" "like male and female symbols and astronomical symbols, as well as the complete\n" @@ -17275,22 +18327,22 @@ msgid "" "to use interface for these symbols." msgstr "" -#: gnu/packages/tex.scm:3771 +#: gnu/packages/tex.scm:3860 msgid "Produces figures which text can flow around" msgstr "" -#: gnu/packages/tex.scm:3773 +#: gnu/packages/tex.scm:3862 msgid "" "This package allows figures or tables to have text wrapped around them.\n" "It does not work in combination with list environments, but can be used in a\n" "@code{parbox} or @code{minipage}, and in two-column format." msgstr "" -#: gnu/packages/tex.scm:3805 +#: gnu/packages/tex.scm:3894 msgid "Extended UTF-8 input encoding support for LaTeX" msgstr "" -#: gnu/packages/tex.scm:3807 +#: gnu/packages/tex.scm:3896 msgid "" "The bundle provides the @code{ucs} package, and @code{utf8x.def},\n" "together with a large number of support files. The @code{utf8x.def}\n" @@ -17303,11 +18355,11 @@ msgid "" "package of that name now exists." msgstr "" -#: gnu/packages/tex.scm:3839 +#: gnu/packages/tex.scm:3928 msgid "Extract bits of a LaTeX source for output" msgstr "" -#: gnu/packages/tex.scm:3841 +#: gnu/packages/tex.scm:3930 msgid "" "The main purpose of the preview package is the extraction of selected\n" "elements from a LaTeX source, like formulas or graphics, into separate\n" @@ -17318,11 +18370,11 @@ msgid "" "files." msgstr "" -#: gnu/packages/tex.scm:3864 +#: gnu/packages/tex.scm:3953 msgid "Expand acronyms at least once" msgstr "" -#: gnu/packages/tex.scm:3866 +#: gnu/packages/tex.scm:3955 msgid "" "This package ensures that all acronyms used in the text are spelled out\n" "in full at least once. It also provides an environment to build a list of\n" @@ -17331,17 +18383,17 @@ msgid "" "e-TeX." msgstr "" -#: gnu/packages/tex.scm:3900 +#: gnu/packages/tex.scm:3989 msgid "TeX extension for direct creation of PDF" msgstr "TeX-udvidelse for direkte oprettelse af PDF" -#: gnu/packages/tex.scm:3902 +#: gnu/packages/tex.scm:3991 msgid "" "This package provides an extension of TeX which can be configured to\n" "directly generate PDF documents instead of DVI." msgstr "" -#: gnu/packages/tex.scm:3969 +#: gnu/packages/tex.scm:4058 msgid "" "TeX Live provides a comprehensive TeX document production system.\n" "It includes all the major TeX-related programs, macro packages, and fonts\n" @@ -17351,7 +18403,7 @@ msgid "" "This package contains the complete tree of texmf-dist data." msgstr "" -#: gnu/packages/tex.scm:4031 +#: gnu/packages/tex.scm:4121 msgid "" "TeX Live provides a comprehensive TeX document production system.\n" "It includes all the major TeX-related programs, macro packages, and fonts\n" @@ -17361,11 +18413,11 @@ msgid "" "This package contains the complete TeX Live distribution." msgstr "" -#: gnu/packages/tex.scm:4074 +#: gnu/packages/tex.scm:4164 msgid "Interface to read and parse BibTeX files" msgstr "" -#: gnu/packages/tex.scm:4075 +#: gnu/packages/tex.scm:4165 msgid "" "@code{Text::BibTeX} is a Perl library for reading, parsing,\n" "and processing BibTeX files. @code{Text::BibTeX} gives you access to the data\n" @@ -17374,21 +18426,21 @@ msgid "" "values (strings, macros, or numbers) pasted together." msgstr "" -#: gnu/packages/tex.scm:4157 +#: gnu/packages/tex.scm:4247 msgid "Backend for the BibLaTeX citation management tool" msgstr "" -#: gnu/packages/tex.scm:4158 +#: gnu/packages/tex.scm:4248 msgid "" "Biber is a BibTeX replacement for users of biblatex. Among\n" "other things it comes with full Unicode support." msgstr "" -#: gnu/packages/tex.scm:4182 +#: gnu/packages/tex.scm:4272 msgid "Wrapper for LaTeX and friends" msgstr "" -#: gnu/packages/tex.scm:4184 +#: gnu/packages/tex.scm:4274 msgid "" "Rubber is a program whose purpose is to handle all tasks related to the\n" "compilation of LaTeX documents. This includes compiling the document itself,\n" @@ -17398,32 +18450,32 @@ msgid "" "PDF documents." msgstr "" -#: gnu/packages/tex.scm:4226 +#: gnu/packages/tex.scm:4316 msgid "LaTeX editor" msgstr "LaTeX-redigeringsprogram" -#: gnu/packages/tex.scm:4227 +#: gnu/packages/tex.scm:4317 msgid "" "Texmaker is a program that integrates many tools needed to\n" "develop documents with LaTeX, in a single application." msgstr "" -#: gnu/packages/tex.scm:4266 +#: gnu/packages/tex.scm:4356 msgid "Book on TeX, plain TeX and Eplain" msgstr "" -#: gnu/packages/tex.scm:4267 +#: gnu/packages/tex.scm:4357 msgid "" "@i{TeX for the Impatient} is a ~350 page book on TeX,\n" "plain TeX, and Eplain, originally written by Paul Abrahams, Kathryn Hargreaves,\n" "and Karl Berry." msgstr "" -#: gnu/packages/tex.scm:4351 +#: gnu/packages/tex.scm:4441 msgid "Document preparation system with GUI" msgstr "" -#: gnu/packages/tex.scm:4352 +#: gnu/packages/tex.scm:4442 msgid "" "LyX is a document preparation system. It excels at letting\n" "you create complex technical and scientific articles with mathematics,\n" @@ -17432,6 +18484,198 @@ msgid "" "required: automatic sectioning and pagination, spell checking and so forth." msgstr "" +#: gnu/packages/tex.scm:4476 +msgid "Multimedia inclusion package with Adobe Reader-9/X compatibility" +msgstr "" + +#: gnu/packages/tex.scm:4478 +msgid "" +"The package provides an interface to embed interactive Flash (SWF) and 3D\n" +"objects (Adobe U3D & PRC), as well as video and sound files or streams in the\n" +"popular MP4, FLV and MP3 formats into PDF documents with Acrobat-9/X\n" +"compatibility. Playback of multimedia files uses the built-in Flash Player of\n" +"Adobe Reader and does, therefore, not depend on external plug-ins. Flash Player\n" +"supports the efficient H.264 codec for video compression.\n" +"\n" +"The package is based on the RichMedia Annotation, an Adobe addition to the PDF\n" +"specification. It replaces the now obsolete @code{movie15} package." +msgstr "" + +#: gnu/packages/tex.scm:4516 +msgid "Provide OCG (Optional Content Groups) support within a PDF document" +msgstr "" + +#: gnu/packages/tex.scm:4518 +msgid "" +"This package provides OCG (Optional Content Groups) support within a PDF\n" +"document.\n" +"\n" +"It re-implements the functionality of the @code{ocg}, @code{ocgx}, and\n" +"@code{ocg-p} packages and adds support for all known engines and back-ends\n" +"including:\n" +"\n" +"@itemize\n" +"@item LaTeX → dvips → @code{ps2pdf}/Distiller\n" +"@item (Xe)LaTeX(x) → @code{dvipdfmx}\n" +"@item pdfLaTeX and LuaLaTeX .\n" +"@end itemize\n" +"\n" +"It also ensures compatibility with the @code{media9} and @code{animate} packages." +msgstr "" + +#: gnu/packages/tex.scm:4550 +msgid "Various LATEX packages by Martin Schröder" +msgstr "" + +#: gnu/packages/tex.scm:4552 +msgid "" +"A bundle of LATEX packages by Martin Schröder; the collection comprises:\n" +"\n" +"@itemize\n" +"@item @command{count1to}, make use of fixed TEX counters;\n" +"@item @command{everysel}, set commands to execute every time a font is selected;\n" +"@item @command{everyshi}, set commands to execute whenever a page is shipped out;\n" +"@item @command{multitoc}, typeset the table of contents in multiple columns;\n" +"@item @command{prelim2e}, mark typeset pages as preliminary; and\n" +"@item @command{ragged2e}, typeset ragged text and allow hyphenation.\n" +"@end itemize\n" +msgstr "" + +#: gnu/packages/tex.scm:4582 +msgid "Insert pagebreak if not enough space" +msgstr "" + +#: gnu/packages/tex.scm:4584 +msgid "" +"Provides commands to disable pagebreaking within a given vertical\n" +"space. If there is not enough space between the command and the bottom of the\n" +"page, a new page will be started." +msgstr "" + +#: gnu/packages/tex.scm:4617 +msgid "UK format dates, with weekday" +msgstr "" + +#: gnu/packages/tex.scm:4619 +msgid "" +"The package is used to change the format of @code{\\today}’s date,\n" +"including the weekday, e.g., \"Saturday, 26 June 2008\", the 'UK format', which\n" +"is preferred in many parts of the world, as distinct from that which is used in\n" +"@code{\\maketitle} of the article class, \"June 26, 2008\", the 'US format'." +msgstr "" + +#: gnu/packages/tex.scm:4653 +msgid "Underline text in TeX" +msgstr "" + +#: gnu/packages/tex.scm:4655 +msgid "" +"The package provides an @code{\\ul} (underline) command which will break\n" +"over line ends; this technique may be used to replace @code{\\em} (both in that\n" +"form and as the @code{\\emph} command), so as to make output look as if it comes\n" +"from a typewriter. The package also offers double and wavy underlining, and\n" +"striking out (line through words) and crossing out (/// over words)." +msgstr "" + +#: gnu/packages/tex.scm:4707 +msgid "Create PostScript and PDF graphics in TeX" +msgstr "" + +#: gnu/packages/tex.scm:4709 +msgid "" +"PGF is a macro package for creating graphics. It is platform- and\n" +"format-independent and works together with the most important TeX backend\n" +"drivers, including pdfTeX and dvips. It comes with a user-friendly syntax layer\n" +"called TikZ.\n" +"\n" +"Its usage is similar to pstricks and the standard picture environment. PGF\n" +"works with plain (pdf-)TeX, (pdf-)LaTeX, and ConTeXt. Unlike pstricks, it can\n" +"produce either PostScript or PDF output." +msgstr "" + +#: gnu/packages/tex.scm:4754 +msgid "Bundle of versatile classes and packages" +msgstr "" + +#: gnu/packages/tex.scm:4756 +msgid "" +"The KOMA-Script bundle provides replacements for the article, report, and\n" +"book classes with emphasis on typography and versatility. There is also a\n" +"letter class.\n" +"\n" +"The bundle also offers:\n" +"\n" +"@itemize\n" +"@item a package for calculating type areas in the way laid down by the\n" +"typographer Jan Tschichold,\n" +"@item packages for easily changing and defining page styles,\n" +"@item a package scrdate for getting not only the current date but also the name\n" +"of the day, and\n" +"@item a package scrtime for getting the current time.\n" +"@end itemize\n" +"\n" +"All these packages may be used not only with KOMA-Script classes but also with\n" +"the standard classes.\n" +"\n" +"Since every package has its own version number, the version number quoted only\n" +"refers to the version of scrbook, scrreprt, scrartcl, scrlttr2 and\n" +"typearea (which are the main parts of the bundle)." +msgstr "" + +#: gnu/packages/tex.scm:4806 +msgid "Grab items in lists using user-specified seperation character" +msgstr "" + +#: gnu/packages/tex.scm:4808 +msgid "" +"This package allows one to capture all the items of a list, for which\n" +"the parsing character has been selected by the user, and to access any of\n" +"these items with a simple syntax." +msgstr "" + +#: gnu/packages/tex.scm:4842 +msgid "Read, store and recall array-formatted data" +msgstr "" + +#: gnu/packages/tex.scm:4844 +msgid "" +"This package allows the user to input formatted data into elements of a\n" +"2-D or 3-D array and to recall that data at will by individual cell number.\n" +"The data can be but need not be numerical in nature. It can be, for example,\n" +"formatted text." +msgstr "" + +#: gnu/packages/tex.scm:4879 +msgid "Deposit verbatim text in a box" +msgstr "" + +#: gnu/packages/tex.scm:4881 +msgid "" +"The package provides a @code{verbbox} environment to place its contents\n" +"into a globally available box, or into a box specified by the user. The\n" +"global box may then be used in a variety of situations (for example, providing\n" +"a replica of the @code{boxedverbatim} environment itself). A valuable use is\n" +"in places where the standard @code{verbatim} environment (which is based on a\n" +"@code{trivlist}) may not appear." +msgstr "" + +#: gnu/packages/tex.scm:4916 +msgid "Verbatim phrases and listings in LaTeX" +msgstr "" + +#: gnu/packages/tex.scm:4918 +msgid "" +"Examplep provides sophisticated features for typesetting verbatim source\n" +"code listings, including the display of the source code and its compiled LaTeX\n" +"or METAPOST output side-by-side, with automatic width detection and enabled\n" +"page breaks (in the source), without the need for specifying the source twice.\n" +"Special care is taken that section, page and footnote numbers do not interfere\n" +"with the main document. For typesetting short verbatim phrases, a replacement\n" +"for the @code{\\verb} command is also provided in the package, which can be\n" +"used inside tables and moving arguments such as footnotes and section\n" +"titles." +msgstr "" + #: gnu/packages/texinfo.scm:54 msgid "The GNU documentation format" msgstr "" @@ -17450,11 +18694,11 @@ msgstr "" msgid "Standalone Info documentation reader" msgstr "" -#: gnu/packages/texinfo.scm:154 +#: gnu/packages/texinfo.scm:156 msgid "Convert Texinfo to HTML" msgstr "" -#: gnu/packages/texinfo.scm:156 +#: gnu/packages/texinfo.scm:158 msgid "" "Texi2HTML is a Perl script which converts Texinfo source files to HTML\n" "output. It now supports many advanced features, such as internationalization\n" @@ -17469,21 +18713,21 @@ msgid "" "Texi2HTML." msgstr "" -#: gnu/packages/textutils.scm:77 +#: gnu/packages/textutils.scm:79 msgid "DOS/Mac to Unix and vice versa text file format converter" msgstr "" -#: gnu/packages/textutils.scm:79 +#: gnu/packages/textutils.scm:81 msgid "" "dos2unix is a tool to convert line breaks in a text file from Unix format\n" "to DOS format and vice versa." msgstr "" -#: gnu/packages/textutils.scm:105 +#: gnu/packages/textutils.scm:106 msgid "Text encoding converter" msgstr "" -#: gnu/packages/textutils.scm:106 +#: gnu/packages/textutils.scm:107 msgid "" "The Recode library converts files between character sets and\n" "usages. It recognises or produces over 200 different character sets (or about\n" @@ -17493,61 +18737,61 @@ msgid "" "handy front-end to the library." msgstr "" -#: gnu/packages/textutils.scm:130 +#: gnu/packages/textutils.scm:131 msgid "Text encoding detection tool" msgstr "" -#: gnu/packages/textutils.scm:131 +#: gnu/packages/textutils.scm:132 msgid "" "Enca (Extremely Naive Charset Analyser) consists of libenca,\n" "an encoding detection library, and enca, a command line frontend, integrating\n" "libenca and several charset conversion libraries and tools." msgstr "" -#: gnu/packages/textutils.scm:181 +#: gnu/packages/textutils.scm:182 msgid "C library for processing UTF-8 Unicode data" msgstr "" -#: gnu/packages/textutils.scm:182 +#: gnu/packages/textutils.scm:183 msgid "" "utf8proc is a small C library that provides Unicode\n" "normalization, case-folding, and other operations for data in the UTF-8\n" "encoding, supporting Unicode version 9.0.0." msgstr "" -#: gnu/packages/textutils.scm:210 +#: gnu/packages/textutils.scm:206 msgid "Gordon's text utils library" msgstr "" -#: gnu/packages/textutils.scm:212 +#: gnu/packages/textutils.scm:208 msgid "" "libgtextutils is a text utilities library used by the fastx toolkit from\n" "the Hannon Lab." msgstr "" -#: gnu/packages/textutils.scm:244 +#: gnu/packages/textutils.scm:240 msgid "C++ hash functions for strings" msgstr "" -#: gnu/packages/textutils.scm:246 +#: gnu/packages/textutils.scm:242 msgid "" "CityHash provides hash functions for strings. The functions mix the\n" "input bits thoroughly but are not suitable for cryptography." msgstr "" -#: gnu/packages/textutils.scm:284 +#: gnu/packages/textutils.scm:280 msgid "String library with very low memory overhead" msgstr "" -#: gnu/packages/textutils.scm:286 +#: gnu/packages/textutils.scm:282 msgid "Ustr is a string library for C with very low memory overhead." msgstr "" -#: gnu/packages/textutils.scm:307 +#: gnu/packages/textutils.scm:303 msgid "C/C++ configuration file library" msgstr "" -#: gnu/packages/textutils.scm:309 +#: gnu/packages/textutils.scm:305 msgid "" "Libconfig is a simple library for manipulating structured configuration\n" "files. This file format is more compact and more readable than XML. And\n" @@ -17555,11 +18799,11 @@ msgid "" "application code." msgstr "" -#: gnu/packages/textutils.scm:329 +#: gnu/packages/textutils.scm:325 msgid "Probabilistic fast file fingerprinting tool" msgstr "" -#: gnu/packages/textutils.scm:331 +#: gnu/packages/textutils.scm:327 msgid "" "pfff is a tool for calculating a compact digital fingerprint of a file\n" "by sampling randomly from the file instead of reading it in full.\n" @@ -17568,22 +18812,22 @@ msgid "" "as existing hashing techniques, with provably negligible risk of collisions." msgstr "" -#: gnu/packages/textutils.scm:352 +#: gnu/packages/textutils.scm:348 msgid "Regular expression library" msgstr "Regulært udtryksbibliotek" -#: gnu/packages/textutils.scm:353 +#: gnu/packages/textutils.scm:349 msgid "" "Oniguruma is a regular expressions library. The special\n" "characteristic of this library is that different character encoding for every\n" "regular expression object can be specified." msgstr "" -#: gnu/packages/textutils.scm:393 +#: gnu/packages/textutils.scm:403 msgid "Microsoft Word document reader" msgstr "Microsoft Word-dokumentlæser" -#: gnu/packages/textutils.scm:394 +#: gnu/packages/textutils.scm:404 msgid "" "Antiword is an application for displaying Microsoft Word\n" "documents. It can also convert the document to PostScript or XML. Only\n" @@ -17593,11 +18837,11 @@ msgid "" "runs Word\"." msgstr "" -#: gnu/packages/textutils.scm:427 +#: gnu/packages/textutils.scm:437 msgid "MS-Word to TeX or plain text converter" msgstr "" -#: gnu/packages/textutils.scm:428 +#: gnu/packages/textutils.scm:438 msgid "" "@command{catdoc} extracts text from MS-Word files, trying to\n" "preserve as many special printable characters as possible. It supports\n" @@ -17613,21 +18857,21 @@ msgid "" "@command{catppt}, which extracts data from PowerPoint presentations." msgstr "" -#: gnu/packages/textutils.scm:469 +#: gnu/packages/textutils.scm:479 msgid "Portable C++ library for handling UTF-8" msgstr "Flytbart C++-bibliotek til håndtering af UTF-8" -#: gnu/packages/textutils.scm:470 +#: gnu/packages/textutils.scm:480 msgid "" "UTF8-CPP is a C++ library for handling UTF-8 encoded text\n" "in a portable way." msgstr "" -#: gnu/packages/textutils.scm:538 +#: gnu/packages/textutils.scm:548 msgid "Bayesian text and email classifier" msgstr "" -#: gnu/packages/textutils.scm:540 +#: gnu/packages/textutils.scm:550 msgid "" "dbacl is a fast Bayesian text and email classifier. It builds a variety\n" "of language models using maximum entropy (minimum divergence) principles, and\n" @@ -17635,19 +18879,19 @@ msgid "" "categories." msgstr "" -#: gnu/packages/textutils.scm:582 +#: gnu/packages/textutils.scm:586 msgid "Configuration file parser library" msgstr "" -#: gnu/packages/textutils.scm:584 +#: gnu/packages/textutils.scm:588 msgid "C library for creating and parsing configuration files." msgstr "" -#: gnu/packages/textutils.scm:612 +#: gnu/packages/textutils.scm:616 msgid "Syntax highlighting text component for Java Swing" msgstr "" -#: gnu/packages/textutils.scm:613 +#: gnu/packages/textutils.scm:617 msgid "" "RSyntaxTextArea is a syntax highlighting, code folding text\n" "component for Java Swing. It extends @code{JTextComponent} so it integrates\n" @@ -17656,63 +18900,98 @@ msgid "" "source code." msgstr "" -#: gnu/packages/textutils.scm:651 +#: gnu/packages/textutils.scm:655 msgid "Fast implementation of the edit distance (Levenshtein distance)" msgstr "" -#: gnu/packages/textutils.scm:653 +#: gnu/packages/textutils.scm:657 msgid "" "This library simply implements Levenshtein distance algorithm with C++\n" "and Cython." msgstr "" -#: gnu/packages/textutils.scm:673 +#: gnu/packages/textutils.scm:677 msgid "@code{runewidth} provides Go functions to work with string widths" msgstr "" -#: gnu/packages/textutils.scm:675 +#: gnu/packages/textutils.scm:679 msgid "" "The @code{runewidth} library provides Go functions for padding,\n" "measuring and checking the width of strings, with support east asian text." msgstr "" -#: gnu/packages/version-control.scm:132 +#: gnu/packages/textutils.scm:730 +msgid "Recover text from @file{.docx} files, with good formatting" +msgstr "" + +#: gnu/packages/textutils.scm:732 +msgid "" +"@command{docx2txt} is a Perl based command line utility to convert\n" +"Microsoft Office @file{.docx} documents to equivalent text documents. Latest\n" +"version supports following features during text extraction.\n" +"\n" +"@itemize\n" +"@item Character conversions; currency characters are converted to respective\n" +"names like Euro.\n" +"@item Capitalisation of text blocks.\n" +"@item Center and right justification of text fitting in a line of\n" +"(configurable) 80 columns.\n" +"@item Horizontal ruler, line breaks, paragraphs separation, tabs.\n" +"@item Indicating hyperlinked text along with the hyperlink (configurable).\n" +"@item Handling (bullet, decimal, letter, roman) lists along with (attempt at)\n" +"indentation.\n" +"@end itemize\n" +msgstr "" + +#: gnu/packages/textutils.scm:766 +msgid "Convert between Traditional Chinese and Simplified Chinese" +msgstr "" + +#: gnu/packages/textutils.scm:767 +msgid "" +"Open Chinese Convert (OpenCC) converts between Traditional\n" +"Chinese and Simplified Chinese, supporting character-level conversion,\n" +"phrase-level conversion, variant conversion, and regional idioms among\n" +"Mainland China, Taiwan, and Hong-Kong." +msgstr "" + +#: gnu/packages/version-control.scm:137 msgid "Version control system supporting both distributed and centralized workflows" msgstr "" -#: gnu/packages/version-control.scm:134 +#: gnu/packages/version-control.scm:139 msgid "" "GNU Bazaar is a version control system that allows you to record\n" "changes to project files over time. It supports both a distributed workflow\n" "as well as the classic centralized workflow." msgstr "" -#: gnu/packages/version-control.scm:372 +#: gnu/packages/version-control.scm:453 msgid "Distributed version control system" msgstr "" -#: gnu/packages/version-control.scm:374 +#: gnu/packages/version-control.scm:455 msgid "" "Git is a free distributed version control system designed to handle\n" "everything from small to very large projects with speed and efficiency." msgstr "" -#: gnu/packages/version-control.scm:424 +#: gnu/packages/version-control.scm:572 msgid "Library providing Git core methods" msgstr "" -#: gnu/packages/version-control.scm:426 +#: gnu/packages/version-control.scm:574 msgid "" "Libgit2 is a portable, pure C implementation of the Git core methods\n" "provided as a re-entrant linkable library with a solid API, allowing you to\n" "write native speed custom Git applications in any language with bindings." msgstr "" -#: gnu/packages/version-control.scm:462 +#: gnu/packages/version-control.scm:610 msgid "Transparent encryption of files in a git repository" msgstr "" -#: gnu/packages/version-control.scm:463 +#: gnu/packages/version-control.scm:611 msgid "" "git-crypt enables transparent encryption and decryption of\n" "files in a git repository. Files which you choose to protect are encrypted when\n" @@ -17724,11 +19003,11 @@ msgid "" "to lock down your entire repository." msgstr "" -#: gnu/packages/version-control.scm:498 +#: gnu/packages/version-control.scm:646 msgid "Whole remote repository encryption" msgstr "" -#: gnu/packages/version-control.scm:499 +#: gnu/packages/version-control.scm:647 msgid "" "git-remote-gcrypt is a Git remote helper to push and pull from\n" "repositories encrypted with GnuPG. It works with the standard Git transports,\n" @@ -17747,31 +19026,31 @@ msgid "" "collaboration using typical untrusted file hosts or services." msgstr "" -#: gnu/packages/version-control.scm:593 +#: gnu/packages/version-control.scm:766 msgid "Web frontend for git repositories" msgstr "" -#: gnu/packages/version-control.scm:595 +#: gnu/packages/version-control.scm:768 msgid "" "CGit is an attempt to create a fast web interface for the Git SCM, using\n" "a built-in cache to decrease server I/O pressure." msgstr "" -#: gnu/packages/version-control.scm:624 +#: gnu/packages/version-control.scm:797 msgid "Copy directory to the gh-pages branch" msgstr "Kopier mappe til gh-pages-grenen" -#: gnu/packages/version-control.scm:625 +#: gnu/packages/version-control.scm:798 msgid "" "Script that copies a directory to the gh-pages branch (by\n" "default) of the repository." msgstr "" -#: gnu/packages/version-control.scm:683 +#: gnu/packages/version-control.scm:856 msgid "Python implementation of the Git object database" msgstr "Pythonimplementering af Git-objektdatabasen" -#: gnu/packages/version-control.scm:685 +#: gnu/packages/version-control.scm:858 msgid "" "GitDB allows you to access @dfn{bare} Git repositories for reading and\n" "writing. It aims at allowing full access to loose objects as well as packs\n" @@ -17779,11 +19058,11 @@ msgid "" "allowing to handle large objects with a small memory footprint." msgstr "" -#: gnu/packages/version-control.scm:724 +#: gnu/packages/version-control.scm:897 msgid "Python library for interacting with Git repositories" msgstr "Pythonbibliotek til at interagere med Git-arkiver" -#: gnu/packages/version-control.scm:726 +#: gnu/packages/version-control.scm:899 msgid "" "GitPython is a python library used to interact with Git repositories,\n" "high-level like git-porcelain, or low-level like git-plumbing.\n" @@ -17794,11 +19073,11 @@ msgid "" "@command{git} command implementation." msgstr "" -#: gnu/packages/version-control.scm:766 +#: gnu/packages/version-control.scm:939 msgid "Command-line flags library for shell scripts" msgstr "" -#: gnu/packages/version-control.scm:768 +#: gnu/packages/version-control.scm:941 msgid "" "Shell Flags (shFlags) is a library written to greatly simplify the\n" "handling of command-line flags in Bourne based Unix shell scripts (bash, dash,\n" @@ -17809,11 +19088,11 @@ msgid "" "will work." msgstr "" -#: gnu/packages/version-control.scm:812 +#: gnu/packages/version-control.scm:985 msgid "Git extensions for Vincent Driessen's branching model" msgstr "" -#: gnu/packages/version-control.scm:814 +#: gnu/packages/version-control.scm:987 msgid "" "Vincent Driessen's branching model is a git branching and release\n" "management strategy that helps developers keep track of features, hotfixes,\n" @@ -17822,11 +19101,11 @@ msgid "" "lot easier." msgstr "" -#: gnu/packages/version-control.scm:847 +#: gnu/packages/version-control.scm:1020 msgid "Stacked Git" msgstr "" -#: gnu/packages/version-control.scm:849 +#: gnu/packages/version-control.scm:1022 msgid "" "StGit is a command-line application that provides functionality similar\n" "to Quilt (i.e., pushing/popping patches to/from a stack), but using Git\n" @@ -17835,11 +19114,11 @@ msgid "" "manipulate them in various ways." msgstr "" -#: gnu/packages/version-control.scm:885 +#: gnu/packages/version-control.scm:1058 msgid "Version control system for @code{$HOME}" msgstr "" -#: gnu/packages/version-control.scm:887 +#: gnu/packages/version-control.scm:1060 msgid "" "vcsh version-controls configuration files in several Git repositories,\n" "all in one single directory. They all maintain their working trees without\n" @@ -17848,43 +19127,43 @@ msgid "" "though this can be overridden." msgstr "" -#: gnu/packages/version-control.scm:923 +#: gnu/packages/version-control.scm:1096 msgid "Run a command over a sequence of commits" msgstr "" -#: gnu/packages/version-control.scm:925 +#: gnu/packages/version-control.scm:1098 msgid "" "git-test-sequence is similar to an automated git bisect except it’s\n" "linear. It will test every change between two points in the DAG. It will\n" "also walk each side of a merge and test those changes individually." msgstr "" -#: gnu/packages/version-control.scm:987 +#: gnu/packages/version-control.scm:1211 msgid "Git access control layer" msgstr "" -#: gnu/packages/version-control.scm:989 +#: gnu/packages/version-control.scm:1213 msgid "" "Gitolite is an access control layer on top of Git, providing fine access\n" "control to Git repositories." msgstr "" -#: gnu/packages/version-control.scm:1013 +#: gnu/packages/version-control.scm:1237 msgid "Decentralized version control system" msgstr "" -#: gnu/packages/version-control.scm:1015 +#: gnu/packages/version-control.scm:1239 msgid "" "Mercurial is a free, distributed source control management tool.\n" "It efficiently handles projects of any size\n" "and offers an easy and intuitive interface." msgstr "" -#: gnu/packages/version-control.scm:1049 +#: gnu/packages/version-control.scm:1273 msgid "HTTP and WebDAV client library" msgstr "" -#: gnu/packages/version-control.scm:1051 +#: gnu/packages/version-control.scm:1275 msgid "" "Neon is an HTTP and WebDAV client library, with a C interface and the\n" "following features:\n" @@ -17906,11 +19185,11 @@ msgid "" "@end enumerate\n" msgstr "" -#: gnu/packages/version-control.scm:1142 +#: gnu/packages/version-control.scm:1364 msgid "Revision control system" msgstr "" -#: gnu/packages/version-control.scm:1144 +#: gnu/packages/version-control.scm:1366 msgid "" "Subversion exists to be universally recognized and adopted as a\n" "centralized version control system characterized by its\n" @@ -17919,11 +19198,11 @@ msgid "" "projects, from individuals to large-scale enterprise operations." msgstr "" -#: gnu/packages/version-control.scm:1166 +#: gnu/packages/version-control.scm:1388 msgid "Per-file local revision control system" msgstr "" -#: gnu/packages/version-control.scm:1168 +#: gnu/packages/version-control.scm:1390 msgid "" "RCS is the original Revision Control System. It works on a\n" "file-by-file basis, in contrast to subsequent version control systems such as\n" @@ -17932,11 +19211,11 @@ msgid "" "machine." msgstr "" -#: gnu/packages/version-control.scm:1196 +#: gnu/packages/version-control.scm:1418 msgid "Historical centralized version control system" msgstr "" -#: gnu/packages/version-control.scm:1198 +#: gnu/packages/version-control.scm:1420 msgid "" "CVS is a version control system, an important component of Source\n" "Configuration Management (SCM). Using it, you can record the history of\n" @@ -17944,11 +19223,11 @@ msgid "" "RCS, PRCS, and Aegis packages." msgstr "" -#: gnu/packages/version-control.scm:1239 +#: gnu/packages/version-control.scm:1466 msgid "Export an RCS or CVS history as a fast-import stream" msgstr "" -#: gnu/packages/version-control.scm:1240 +#: gnu/packages/version-control.scm:1467 msgid "" "This program analyzes a collection of RCS files in a CVS\n" "repository (or outside of one) and, when possible, emits an equivalent history\n" @@ -17961,11 +19240,11 @@ msgid "" "masters from remote CVS hosts." msgstr "" -#: gnu/packages/version-control.scm:1267 +#: gnu/packages/version-control.scm:1494 msgid "Version-control-agnostic ChangeLog diff and commit tool" msgstr "" -#: gnu/packages/version-control.scm:1269 +#: gnu/packages/version-control.scm:1496 msgid "" "The vc-dwim package contains two tools, \"vc-dwim\" and \"vc-chlog\".\n" "vc-dwim is a tool that simplifies the task of maintaining a ChangeLog and\n" @@ -17975,33 +19254,33 @@ msgid "" "standards-compliant ChangeLog entries based on the changes that it detects." msgstr "" -#: gnu/packages/version-control.scm:1294 +#: gnu/packages/version-control.scm:1521 msgid "Make histograms from the output of @command{diff}" msgstr "" -#: gnu/packages/version-control.scm:1296 +#: gnu/packages/version-control.scm:1523 msgid "" "Diffstat reads the output of @command{diff} and displays a histogram of\n" "the insertions, deletions, and modifications per file. It is useful for\n" "reviewing large, complex patch files." msgstr "" -#: gnu/packages/version-control.scm:1335 +#: gnu/packages/version-control.scm:1562 msgid "File-based version control like SCCS" msgstr "" -#: gnu/packages/version-control.scm:1336 +#: gnu/packages/version-control.scm:1563 msgid "" "GNU CSSC provides a replacement for the legacy Unix source\n" "code control system SCCS. This allows old code still under that system to be\n" "accessed and migrated on modern systems." msgstr "" -#: gnu/packages/version-control.scm:1415 +#: gnu/packages/version-control.scm:1651 msgid "Project change supervisor" msgstr "" -#: gnu/packages/version-control.scm:1416 +#: gnu/packages/version-control.scm:1652 msgid "" "Aegis is a project change supervisor, and performs some of\n" "the Software Configuration Management needed in a CASE environment. Aegis\n" @@ -18012,11 +19291,11 @@ msgid "" "any project with more than one developer, is one of Aegis's major functions." msgstr "" -#: gnu/packages/version-control.scm:1489 +#: gnu/packages/version-control.scm:1726 msgid "Edit version-control repository history" msgstr "" -#: gnu/packages/version-control.scm:1490 +#: gnu/packages/version-control.scm:1727 msgid "" "Reposurgeon enables risky operations that version-control\n" "systems don't want to let you do, such as editing past comments and metadata\n" @@ -18027,32 +19306,32 @@ msgid "" "from Subversion to any supported Distributed Version Control System (DVCS)." msgstr "" -#: gnu/packages/version-control.scm:1529 +#: gnu/packages/version-control.scm:1766 msgid "Ncurses-based text user interface for Git" msgstr "" -#: gnu/packages/version-control.scm:1531 +#: gnu/packages/version-control.scm:1768 msgid "" "Tig is an ncurses text user interface for Git, primarily intended as\n" "a history browser. It can also stage hunks for commit, or colorize the\n" -"output of the 'git' command." +"output of the @code{git} command." msgstr "" -#: gnu/packages/version-control.scm:1557 +#: gnu/packages/version-control.scm:1789 msgid "Print the modification time of the latest file" msgstr "" -#: gnu/packages/version-control.scm:1559 +#: gnu/packages/version-control.scm:1791 msgid "" "Recursively find the newest file in a file tree and print its\n" "modification time." msgstr "" -#: gnu/packages/version-control.scm:1584 +#: gnu/packages/version-control.scm:1836 msgid "Multiple repository management tool" msgstr "" -#: gnu/packages/version-control.scm:1586 +#: gnu/packages/version-control.scm:1838 msgid "" "Myrepos provides the @code{mr} command, which maps an operation (e.g.,\n" "fetching updates) over a collection of version control repositories. It\n" @@ -18060,42 +19339,42 @@ msgid "" "Mercurial, Bazaar, Darcs, CVS, Fossil, and Veracity." msgstr "" -#: gnu/packages/version-control.scm:1616 +#: gnu/packages/version-control.scm:1868 msgid "Use hubic as a git-annex remote" msgstr "" -#: gnu/packages/version-control.scm:1618 +#: gnu/packages/version-control.scm:1870 msgid "" "This package allows you to use your hubic account as a \"special\n" "repository\" with git-annex." msgstr "" -#: gnu/packages/version-control.scm:1671 +#: gnu/packages/version-control.scm:1923 msgid "Software configuration management system" msgstr "" -#: gnu/packages/version-control.scm:1673 +#: gnu/packages/version-control.scm:1925 msgid "" "Fossil is a distributed source control management system which supports\n" "access and administration over HTTP CGI or via a built-in HTTP server. It has\n" "a built-in wiki, built-in file browsing, built-in tickets system, etc." msgstr "" -#: gnu/packages/version-control.scm:1701 +#: gnu/packages/version-control.scm:1953 msgid "Static git page generator" msgstr "" -#: gnu/packages/version-control.scm:1702 +#: gnu/packages/version-control.scm:1954 msgid "" "Stagit creates static pages for git repositories, the results can\n" "be served with a HTTP file server of your choice." msgstr "" -#: gnu/packages/version-control.scm:1787 +#: gnu/packages/version-control.scm:2040 msgid "Distributed Revision Control System" msgstr "" -#: gnu/packages/version-control.scm:1789 +#: gnu/packages/version-control.scm:2042 msgid "" "Darcs is a revision control system. It is:\n" "\n" @@ -18112,22 +19391,22 @@ msgid "" "@end enumerate" msgstr "" -#: gnu/packages/version-control.scm:1841 +#: gnu/packages/version-control.scm:2095 msgid "Java library implementing the Git version control system" msgstr "Javabibliotek der implementerer Git-versionskontrolsystemet" -#: gnu/packages/version-control.scm:1842 +#: gnu/packages/version-control.scm:2096 msgid "" "JGit is a lightweight, pure Java library implementing the\n" "Git version control system, providing repository access routines, support for\n" "network protocols, and core version control algorithms." msgstr "" -#: gnu/packages/version-control.scm:1909 +#: gnu/packages/version-control.scm:2163 msgid "3D visualisation tool for source control repositories" msgstr "" -#: gnu/packages/version-control.scm:1910 +#: gnu/packages/version-control.scm:2164 msgid "" "@code{gource} provides a software version control\n" "visualization. The repository is displayed as a tree where the root of the\n" @@ -18136,11 +19415,11 @@ msgid "" "specific files and directories." msgstr "" -#: gnu/packages/version-control.scm:1956 +#: gnu/packages/version-control.scm:2210 msgid "Simple revision control" msgstr "Simpel revisionskontrol" -#: gnu/packages/version-control.scm:1959 +#: gnu/packages/version-control.scm:2213 #, scheme-format msgid "" "SRC (or src) is simple revision control, a version-control system for\n" @@ -18150,11 +19429,35 @@ msgid "" "directory full of HOWTOs." msgstr "" -#: gnu/packages/virtualization.scm:206 +#: gnu/packages/version-control.scm:2338 +msgid "Manage files with Git, without checking in their contents" +msgstr "" + +#: gnu/packages/version-control.scm:2339 +msgid "" +"This package allows managing files with Git, without\n" +"checking the file contents into Git. It can store files in many places,\n" +"such as local hard drives and cloud storage services. It can also be\n" +"used to keep a folder in sync between computers." +msgstr "" + +#: gnu/packages/version-control.scm:2392 +msgid "Determine when a commit was merged into a Git branch" +msgstr "" + +#: gnu/packages/version-control.scm:2393 +msgid "" +"This Git extension defines a subcommand,\n" +"@code{when-merged}, whose core operation is to find the merge that brought a\n" +"given commit into the specified ref(s). It has various options that control\n" +"how information about the merge is displayed." +msgstr "" + +#: gnu/packages/virtualization.scm:214 msgid "Machine emulator and virtualizer" msgstr "" -#: gnu/packages/virtualization.scm:208 +#: gnu/packages/virtualization.scm:216 msgid "" "QEMU is a generic machine emulator and virtualizer.\n" "\n" @@ -18169,15 +19472,15 @@ msgid "" "server and embedded PowerPC, and S390 guests." msgstr "" -#: gnu/packages/virtualization.scm:230 +#: gnu/packages/virtualization.scm:238 msgid "Machine emulator and virtualizer (without GUI)" msgstr "" -#: gnu/packages/virtualization.scm:320 +#: gnu/packages/virtualization.scm:330 msgid "Operating system information database" msgstr "" -#: gnu/packages/virtualization.scm:321 +#: gnu/packages/virtualization.scm:331 msgid "" "libosinfo is a GObject based library API for managing\n" "information about operating systems, hypervisors and the (virtual) hardware\n" @@ -18187,22 +19490,22 @@ msgid "" "all common programming languages. Vala bindings are also provided." msgstr "" -#: gnu/packages/virtualization.scm:369 +#: gnu/packages/virtualization.scm:378 msgid "Linux container tools" msgstr "" -#: gnu/packages/virtualization.scm:372 +#: gnu/packages/virtualization.scm:381 msgid "" "LXC is a userspace interface for the Linux kernel containment features.\n" "Through a powerful API and simple tools, it lets Linux users easily create and\n" "manage system or application containers." msgstr "" -#: gnu/packages/virtualization.scm:455 +#: gnu/packages/virtualization.scm:464 msgid "Simple API for virtualization" msgstr "" -#: gnu/packages/virtualization.scm:456 +#: gnu/packages/virtualization.scm:465 msgid "" "Libvirt is a C toolkit to interact with the virtualization\n" "capabilities of recent versions of Linux. The library aims at providing long\n" @@ -18210,11 +19513,11 @@ msgid "" "to integrate other virtualization mechanisms if needed." msgstr "" -#: gnu/packages/virtualization.scm:497 +#: gnu/packages/virtualization.scm:506 msgid "GLib wrapper around libvirt" msgstr "" -#: gnu/packages/virtualization.scm:498 +#: gnu/packages/virtualization.scm:507 msgid "" "libvirt-glib wraps the libvirt library to provide a\n" "high-level object-oriented API better suited for glib-based applications, via\n" @@ -18227,11 +19530,11 @@ msgid "" "@end enumerate\n" msgstr "" -#: gnu/packages/virtualization.scm:540 +#: gnu/packages/virtualization.scm:549 msgid "Python bindings to libvirt" msgstr "Pythonbindinger for libvirt" -#: gnu/packages/virtualization.scm:541 +#: gnu/packages/virtualization.scm:550 msgid "" "This package provides Python bindings to the libvirt\n" "virtualization library." @@ -18239,11 +19542,11 @@ msgstr "" "Denne pakke tilbyder Pythonbindinger til virtualiseringsbiblioteket\n" "libvirt." -#: gnu/packages/virtualization.scm:636 +#: gnu/packages/virtualization.scm:645 msgid "Manage virtual machines" msgstr "Håndter virtuelle maskiner" -#: gnu/packages/virtualization.scm:638 +#: gnu/packages/virtualization.scm:647 msgid "" "The virt-manager application is a desktop user interface for managing\n" "virtual machines through libvirt. It primarily targets KVM VMs, but also\n" @@ -18251,11 +19554,11 @@ msgid "" "domains, their live performance and resource utilization statistics." msgstr "" -#: gnu/packages/virtualization.scm:728 +#: gnu/packages/virtualization.scm:737 msgid "Checkpoint and restore in user space" msgstr "" -#: gnu/packages/virtualization.scm:729 +#: gnu/packages/virtualization.scm:738 msgid "" "Using this tool, you can freeze a running application (or\n" "part of it) and checkpoint it to a hard drive as a collection of files. You\n" @@ -18264,22 +19567,22 @@ msgid "" "mainly implemented in user space." msgstr "" -#: gnu/packages/virtualization.scm:754 +#: gnu/packages/virtualization.scm:763 msgid "Backup and restore QEMU machines" msgstr "" -#: gnu/packages/virtualization.scm:755 +#: gnu/packages/virtualization.scm:764 msgid "" "qmpbackup is designed to create and restore full and\n" "incremental backups of running QEMU virtual machines via QMP, the QEMU\n" "Machine Protocol." msgstr "" -#: gnu/packages/virtualization.scm:796 +#: gnu/packages/virtualization.scm:808 msgid "KVM Frame Relay (KVMFR) implementation" msgstr "" -#: gnu/packages/virtualization.scm:797 +#: gnu/packages/virtualization.scm:809 msgid "" "Looking Glass allows the use of a KVM (Kernel-based Virtual\n" "Machine) configured for VGA PCI Pass-through without an attached physical\n" @@ -18287,11 +19590,11 @@ msgid "" "monitor/GPU." msgstr "" -#: gnu/packages/virtualization.scm:852 +#: gnu/packages/virtualization.scm:864 msgid "Open container initiative runtime" msgstr "" -#: gnu/packages/virtualization.scm:855 +#: gnu/packages/virtualization.scm:867 msgid "" "@command{runc} is a command line client for running applications\n" "packaged according to the\n" @@ -18300,22 +19603,82 @@ msgid "" "Open Container Initiative specification." msgstr "" -#: gnu/packages/webkit.scm:140 +#: gnu/packages/virtualization.scm:913 +msgid "Tool for modifying Open Container images" +msgstr "" + +#: gnu/packages/virtualization.scm:915 +msgid "" +"@command{umoci} is a tool that allows for high-level modification of an\n" +"Open Container Initiative (OCI) image layout and its tagged images." +msgstr "" + +#: gnu/packages/virtualization.scm:960 +msgid "Interact with container images and container image registries" +msgstr "" + +#: gnu/packages/virtualization.scm:962 +msgid "" +"@command{skopeo} is a command line utility providing various operations\n" +"with container images and container image registries. It can:\n" +"@enumerate\n" +"\n" +"@item Copy container images between various containers image stores,\n" +"converting them as necessary.\n" +"\n" +"@item Convert a Docker schema 2 or schema 1 container image to an OCI image.\n" +"\n" +"@item Inspect a repository on a container registry without needlessly pulling\n" +"the image.\n" +"\n" +"@item Sign and verify container images.\n" +"\n" +"@item Delete container images from a remote container registry.\n" +"\n" +"@end enumerate" +msgstr "" + +#: gnu/packages/virtualization.scm:996 +msgid "Python bindings for Vagrant" +msgstr "Pythonbindinger for Vagrant" + +#: gnu/packages/virtualization.scm:998 +msgid "" +"Python-vagrant is a Python module that provides a thin wrapper around the\n" +"@code{vagrant} command line executable, allowing programmatic control of Vagrant\n" +"virtual machines." +msgstr "" + +#: gnu/packages/virtualization.scm:1049 +msgid "Unprivileged sandboxing tool" +msgstr "" + +#: gnu/packages/virtualization.scm:1050 +msgid "" +"Bubblewrap is aimed at running applications in a sandbox,\n" +"where it has restricted access to parts of the operating system or user data\n" +"such as the home directory. Bubblewrap always creates a new mount namespace,\n" +"and the user can specify exactly what parts of the filesystem should be visible\n" +"in the sandbox. Any such directories specified is mounted nodev by default,\n" +"and can be made readonly." +msgstr "" + +#: gnu/packages/webkit.scm:152 msgid "Web content engine for GTK+" msgstr "" -#: gnu/packages/webkit.scm:142 +#: gnu/packages/webkit.scm:154 msgid "" "WebKitGTK+ is a full-featured port of the WebKit rendering engine,\n" "suitable for projects requiring any kind of web integration, from hybrid\n" "HTML/CSS applications to full-fledged web browsers." msgstr "" -#: gnu/packages/web.scm:142 +#: gnu/packages/web.scm:152 msgid "Featureful HTTP server" msgstr "" -#: gnu/packages/web.scm:144 +#: gnu/packages/web.scm:154 msgid "" "The Apache HTTP Server Project is a collaborative software development\n" "effort aimed at creating a robust, commercial-grade, featureful, and\n" @@ -18325,96 +19688,96 @@ msgid "" "and its related documentation." msgstr "" -#: gnu/packages/web.scm:176 +#: gnu/packages/web.scm:186 msgid "Apache HTTPD module for Python WSGI applications" msgstr "" -#: gnu/packages/web.scm:178 +#: gnu/packages/web.scm:188 msgid "" "The mod_wsgi module for the Apache HTTPD Server adds support for running\n" "applications that support the Python @acronym{WSGI, Web Server Gateway\n" "Interface} specification." msgstr "" -#: gnu/packages/web.scm:265 +#: gnu/packages/web.scm:275 msgid "HTTP and reverse proxy server" msgstr "" -#: gnu/packages/web.scm:267 +#: gnu/packages/web.scm:277 msgid "" "Nginx (\"engine X\") is a high-performance web and reverse proxy server\n" "created by Igor Sysoev. It can be used both as a stand-alone web server\n" "and as a proxy to reduce the load on back-end HTTP or mail servers." msgstr "" -#: gnu/packages/web.scm:312 +#: gnu/packages/web.scm:322 msgid "XSLScript with NGinx specific modifications" msgstr "" -#: gnu/packages/web.scm:314 +#: gnu/packages/web.scm:324 msgid "" "XSLScript is a terse notation for writing complex XSLT stylesheets.\n" "This is modified version, specifically intended for use with the NGinx\n" "documentation." msgstr "" -#: gnu/packages/web.scm:368 +#: gnu/packages/web.scm:378 msgid "Documentation for the nginx web server" msgstr "Dokumentation for nginx-internetserveren" -#: gnu/packages/web.scm:370 +#: gnu/packages/web.scm:380 msgid "This package provides HTML documentation for the nginx web server." msgstr "Denne pakke tilbyder HTML-dokumentation for nginx-internetserveren." -#: gnu/packages/web.scm:393 +#: gnu/packages/web.scm:403 msgid "Language-independent, high-performant extension to CGI" msgstr "Sproguafhængig, højtydende udvidelse til CGI" -#: gnu/packages/web.scm:394 +#: gnu/packages/web.scm:404 msgid "" "FastCGI is a language-independent, scalable extension to CGI\n" "that provides high performance without the limitations of server specific\n" "APIs." msgstr "" -#: gnu/packages/web.scm:430 +#: gnu/packages/web.scm:435 msgid "Simple server for running CGI applications over FastCGI" msgstr "Simpel server til at afvikle CGI-programmer over FastCGI" -#: gnu/packages/web.scm:431 +#: gnu/packages/web.scm:436 msgid "" "Fcgiwrap is a simple server for running CGI applications\n" "over FastCGI. It hopes to provide clean CGI support to Nginx (and other web\n" "servers that may need it)." msgstr "" -#: gnu/packages/web.scm:462 +#: gnu/packages/web.scm:467 msgid "PSGI/Plack web server" msgstr "" -#: gnu/packages/web.scm:463 +#: gnu/packages/web.scm:468 msgid "" "Starman is a PSGI perl web server that has unique features\n" "such as high performance, preforking, signal support, superdaemon awareness,\n" "and UNIX socket support." msgstr "" -#: gnu/packages/web.scm:495 +#: gnu/packages/web.scm:500 msgid "Java Web Start" msgstr "" -#: gnu/packages/web.scm:497 +#: gnu/packages/web.scm:502 msgid "" "IcedTea-Web is an implementation of the @dfn{Java Network Launching\n" "Protocol}, also known as Java Web Start. This package provides tools and\n" "libraries for working with JNLP applets." msgstr "" -#: gnu/packages/web.scm:518 +#: gnu/packages/web.scm:523 msgid "JSON C library" msgstr "" -#: gnu/packages/web.scm:520 +#: gnu/packages/web.scm:525 msgid "" "Jansson is a C library for encoding, decoding and manipulating JSON\n" "data." @@ -18432,22 +19795,39 @@ msgid "" "It aims to conform to RFC 7159." msgstr "" -#: gnu/packages/web.scm:618 +#: gnu/packages/web.scm:605 +msgid "JSON parser written in ANSI C" +msgstr "" + +#: gnu/packages/web.scm:606 +msgid "" +"This package provides a very low footprint JSON parser\n" +"written in portable ANSI C.\n" +"\n" +"@itemize\n" +"@item BSD licensed with no dependencies (i.e. just drop the C file into your\n" +"project)\n" +"@item Never recurses or allocates more memory than it needs\n" +"@item Very simple API with operator sugar for C++\n" +"@end itemize" +msgstr "" + +#: gnu/packages/web.scm:650 msgid "Library that maps JSON data to QVariant objects" msgstr "" -#: gnu/packages/web.scm:619 +#: gnu/packages/web.scm:651 msgid "" "QJson is a Qt-based library that maps JSON data to\n" "@code{QVariant} objects. JSON arrays will be mapped to @code{QVariantList}\n" "instances, while JSON's objects will be mapped to @code{QVariantMap}." msgstr "" -#: gnu/packages/web.scm:703 +#: gnu/packages/web.scm:735 msgid "Hierarchical data exploration with zoomable HTML5 pie charts" msgstr "" -#: gnu/packages/web.scm:705 +#: gnu/packages/web.scm:737 msgid "" "Krona is a flexible tool for exploring the relative proportions of\n" "hierarchical data, such as metagenomic classifications, using a radial,\n" @@ -18456,42 +19836,42 @@ msgid "" "current version of any major web browser." msgstr "" -#: gnu/packages/web.scm:738 +#: gnu/packages/web.scm:777 msgid "JSON parser/generator for C++ with both SAX/DOM style API" msgstr "" -#: gnu/packages/web.scm:740 +#: gnu/packages/web.scm:779 msgid "" "RapidJSON is a fast JSON parser/generator for C++ with both SAX/DOM\n" "style API." msgstr "" -#: gnu/packages/web.scm:758 +#: gnu/packages/web.scm:805 msgid "C library for parsing JSON" msgstr "" -#: gnu/packages/web.scm:760 +#: gnu/packages/web.scm:807 msgid "" "Yet Another JSON Library (YAJL) is a small event-driven (SAX-style) JSON\n" "parser written in ANSI C and a small validating JSON generator." msgstr "" -#: gnu/packages/web.scm:790 +#: gnu/packages/web.scm:837 msgid "WebSockets library written in C" msgstr "" -#: gnu/packages/web.scm:792 +#: gnu/packages/web.scm:839 msgid "" "Libwebsockets is a library that allows C programs to establish client\n" "and server WebSockets connections---a protocol layered above HTTP that allows\n" "for efficient socket-like bidirectional reliable communication channels." msgstr "" -#: gnu/packages/web.scm:820 +#: gnu/packages/web.scm:867 msgid "C library for the Publix Suffix List" msgstr "" -#: gnu/packages/web.scm:822 +#: gnu/packages/web.scm:869 msgid "" "A \"public suffix\" is a domain name under which Internet users can\n" "directly register own names.\n" @@ -18509,21 +19889,21 @@ msgid "" "UTS#46." msgstr "" -#: gnu/packages/web.scm:868 +#: gnu/packages/web.scm:915 msgid "HTML validator and tidier" msgstr "" -#: gnu/packages/web.scm:869 +#: gnu/packages/web.scm:916 msgid "" "HTML Tidy is a command-line tool and C library that can be\n" "used to validate and fix HTML data." msgstr "" -#: gnu/packages/web.scm:904 +#: gnu/packages/web.scm:948 msgid "Light-weight HTTP/HTTPS proxy daemon" msgstr "" -#: gnu/packages/web.scm:905 +#: gnu/packages/web.scm:949 msgid "" "Tinyproxy is a light-weight HTTP/HTTPS proxy\n" "daemon. Designed from the ground up to be fast and yet small, it is an ideal\n" @@ -18532,22 +19912,22 @@ msgid "" "unavailable." msgstr "" -#: gnu/packages/web.scm:938 +#: gnu/packages/web.scm:982 msgid "Small caching web proxy" msgstr "" -#: gnu/packages/web.scm:940 +#: gnu/packages/web.scm:984 msgid "" "Polipo is a small caching web proxy (web cache, HTTP proxy, and proxy\n" "server). It was primarily designed to be used by one person or a small group\n" "of people." msgstr "" -#: gnu/packages/web.scm:967 +#: gnu/packages/web.scm:1011 msgid "WebSockets support for any application/server" msgstr "" -#: gnu/packages/web.scm:968 +#: gnu/packages/web.scm:1012 msgid "" "Websockify translates WebSockets traffic to normal socket\n" "traffic. Websockify accepts the WebSockets handshake, parses it, and then\n" @@ -18555,11 +19935,11 @@ msgid "" "directions." msgstr "" -#: gnu/packages/web.scm:994 +#: gnu/packages/web.scm:1038 msgid "Caching web proxy optimized for intermittent internet links" msgstr "" -#: gnu/packages/web.scm:995 +#: gnu/packages/web.scm:1039 msgid "" "WWWOFFLE is a proxy web server that is especially good for\n" "intermittent internet links. It can cache HTTP, HTTPS, FTP, and finger\n" @@ -18568,11 +19948,11 @@ msgid "" "changes, and much more." msgstr "" -#: gnu/packages/web.scm:1020 +#: gnu/packages/web.scm:1064 msgid "C library implementing the OAuth API" msgstr "C-bibliotek der implementerer OAuth API'en" -#: gnu/packages/web.scm:1022 +#: gnu/packages/web.scm:1066 msgid "" "liboauth is a collection of C functions implementing the OAuth API.\n" "liboauth provides functions to escape and encode strings according to OAuth\n" @@ -18581,42 +19961,42 @@ msgid "" "hash/signatures." msgstr "" -#: gnu/packages/web.scm:1046 +#: gnu/packages/web.scm:1089 msgid "YAML 1.1 parser and emitter written in C" msgstr "" -#: gnu/packages/web.scm:1048 +#: gnu/packages/web.scm:1091 msgid "LibYAML is a YAML 1.1 parser and emitter written in C." msgstr "" -#: gnu/packages/web.scm:1065 gnu/packages/web.scm:1099 -#: gnu/packages/web.scm:1122 +#: gnu/packages/web.scm:1108 gnu/packages/web.scm:1142 +#: gnu/packages/web.scm:1165 msgid "Media stream URL parser" msgstr "" -#: gnu/packages/web.scm:1066 +#: gnu/packages/web.scm:1109 msgid "" "This package contains support scripts called by libquvi to\n" "parse media stream properties." msgstr "" -#: gnu/packages/web.scm:1100 +#: gnu/packages/web.scm:1143 msgid "" "libquvi is a library with a C API for parsing media stream\n" "URLs and extracting their actual media files." msgstr "" -#: gnu/packages/web.scm:1123 +#: gnu/packages/web.scm:1166 msgid "" "quvi is a command-line-tool suite to extract media files\n" "from streaming URLs. It is a command-line wrapper for the libquvi library." msgstr "" -#: gnu/packages/web.scm:1195 +#: gnu/packages/web.scm:1238 msgid "High-performance asynchronous HTTP client library" msgstr "" -#: gnu/packages/web.scm:1197 +#: gnu/packages/web.scm:1240 msgid "" "serf is a C-based HTTP client library built upon the Apache Portable\n" "Runtime (APR) library. It multiplexes connections, running the read/write\n" @@ -18624,49 +20004,49 @@ msgid "" "minimum to provide high performance operation." msgstr "" -#: gnu/packages/web.scm:1251 +#: gnu/packages/web.scm:1292 msgid "CSS pre-processor" msgstr "" -#: gnu/packages/web.scm:1252 +#: gnu/packages/web.scm:1293 msgid "" "SassC is a compiler written in C for the CSS pre-processor\n" "language known as SASS." msgstr "" -#: gnu/packages/web.scm:1281 +#: gnu/packages/web.scm:1322 msgid "Compile a log format string to perl-code" msgstr "" -#: gnu/packages/web.scm:1282 +#: gnu/packages/web.scm:1323 msgid "" "This module provides methods to compile a log format string\n" "to perl-code, for faster generation of access_log lines." msgstr "" -#: gnu/packages/web.scm:1310 +#: gnu/packages/web.scm:1351 msgid "SASL authentication framework" msgstr "" -#: gnu/packages/web.scm:1311 +#: gnu/packages/web.scm:1352 msgid "Authen::SASL provides an SASL authentication framework." msgstr "" -#: gnu/packages/web.scm:1336 +#: gnu/packages/web.scm:1377 msgid "Sensible default Catalyst action" msgstr "" -#: gnu/packages/web.scm:1337 +#: gnu/packages/web.scm:1378 msgid "" "This Catalyst action implements a sensible default end\n" "action, which will forward to the first available view." msgstr "" -#: gnu/packages/web.scm:1369 +#: gnu/packages/web.scm:1410 msgid "Automated REST Method Dispatching" msgstr "" -#: gnu/packages/web.scm:1370 +#: gnu/packages/web.scm:1411 msgid "" "This Action handles doing automatic method dispatching for\n" "REST requests. It takes a normal Catalyst action, and changes the dispatch to\n" @@ -18675,32 +20055,32 @@ msgid "" "regular method." msgstr "" -#: gnu/packages/web.scm:1407 +#: gnu/packages/web.scm:1448 msgid "Storage class for Catalyst authentication using DBIx::Class" msgstr "" -#: gnu/packages/web.scm:1408 +#: gnu/packages/web.scm:1449 msgid "" "The Catalyst::Authentication::Store::DBIx::Class class\n" "provides access to authentication information stored in a database via\n" "DBIx::Class." msgstr "" -#: gnu/packages/web.scm:1434 +#: gnu/packages/web.scm:1475 msgid "Create only one instance of Moose component per context" msgstr "" -#: gnu/packages/web.scm:1435 +#: gnu/packages/web.scm:1476 msgid "" "Catalyst::Component::InstancePerContext returns a new\n" "instance of a component on each request." msgstr "" -#: gnu/packages/web.scm:1472 +#: gnu/packages/web.scm:1513 msgid "Catalyst Development Tools" msgstr "" -#: gnu/packages/web.scm:1473 +#: gnu/packages/web.scm:1514 msgid "" "The Catalyst-Devel distribution includes a variety of\n" "modules useful for the development of Catalyst applications, but not required\n" @@ -18710,11 +20090,11 @@ msgid "" "modules." msgstr "" -#: gnu/packages/web.scm:1502 +#: gnu/packages/web.scm:1543 msgid "Regex DispatchType for Catalyst" msgstr "" -#: gnu/packages/web.scm:1503 +#: gnu/packages/web.scm:1544 msgid "" "Dispatch type managing path-matching behaviour using\n" "regexes. Regex dispatch types have been deprecated and removed from Catalyst\n" @@ -18724,32 +20104,32 @@ msgid "" "when the dispatch type is first seen in your application." msgstr "" -#: gnu/packages/web.scm:1552 +#: gnu/packages/web.scm:1593 msgid "DBIx::Class::Schema Model Class" msgstr "" -#: gnu/packages/web.scm:1553 +#: gnu/packages/web.scm:1594 msgid "" "This is a Catalyst Model for DBIx::Class::Schema-based\n" "Models." msgstr "" -#: gnu/packages/web.scm:1576 +#: gnu/packages/web.scm:1617 msgid "Request logging from within Catalyst" msgstr "" -#: gnu/packages/web.scm:1577 +#: gnu/packages/web.scm:1618 msgid "" "This Catalyst plugin enables you to create \"access logs\"\n" "from within a Catalyst application instead of requiring a webserver to do it\n" "for you. It will work even with Catalyst debug logging turned off." msgstr "" -#: gnu/packages/web.scm:1611 +#: gnu/packages/web.scm:1652 msgid "Infrastructure plugin for the Catalyst authentication framework" msgstr "" -#: gnu/packages/web.scm:1612 +#: gnu/packages/web.scm:1653 msgid "" "The authentication plugin provides generic user support for\n" "Catalyst apps. It is the basis for both authentication (checking the user is\n" @@ -18757,52 +20137,52 @@ msgid "" "system authorises them to do)." msgstr "" -#: gnu/packages/web.scm:1643 +#: gnu/packages/web.scm:1684 msgid "Role-based authorization for Catalyst" msgstr "" -#: gnu/packages/web.scm:1644 +#: gnu/packages/web.scm:1685 msgid "" "Catalyst::Plugin::Authorization::Roles provides role-based\n" "authorization for Catalyst based on Catalyst::Plugin::Authentication." msgstr "" -#: gnu/packages/web.scm:1667 +#: gnu/packages/web.scm:1708 msgid "Captchas for Catalyst" msgstr "" -#: gnu/packages/web.scm:1668 +#: gnu/packages/web.scm:1709 msgid "" "This plugin creates and validates Captcha images for\n" "Catalyst." msgstr "" -#: gnu/packages/web.scm:1695 +#: gnu/packages/web.scm:1736 msgid "Load config files of various types" msgstr "" -#: gnu/packages/web.scm:1696 +#: gnu/packages/web.scm:1737 msgid "" "This module will attempt to load find and load configuration\n" "files of various types. Currently it supports YAML, JSON, XML, INI and Perl\n" "formats." msgstr "" -#: gnu/packages/web.scm:1728 +#: gnu/packages/web.scm:1769 msgid "Catalyst generic session plugin" msgstr "" -#: gnu/packages/web.scm:1729 +#: gnu/packages/web.scm:1770 msgid "" "This plugin links the two pieces required for session\n" "management in web applications together: the state, and the store." msgstr "" -#: gnu/packages/web.scm:1757 +#: gnu/packages/web.scm:1798 msgid "Maintain session IDs using cookies" msgstr "" -#: gnu/packages/web.scm:1758 +#: gnu/packages/web.scm:1799 msgid "" "In order for Catalyst::Plugin::Session to work, the session\n" "ID needs to be stored on the client, and the session data needs to be stored\n" @@ -18810,22 +20190,22 @@ msgid "" "cookie mechanism." msgstr "" -#: gnu/packages/web.scm:1788 +#: gnu/packages/web.scm:1829 msgid "FastMmap session storage backend" msgstr "" -#: gnu/packages/web.scm:1789 +#: gnu/packages/web.scm:1830 msgid "" "Catalyst::Plugin::Session::Store::FastMmap is a fast session\n" "storage plugin for Catalyst that uses an mmap'ed file to act as a shared\n" "memory interprocess cache. It is based on Cache::FastMmap." msgstr "" -#: gnu/packages/web.scm:1814 +#: gnu/packages/web.scm:1855 msgid "Stack trace on the Catalyst debug screen" msgstr "" -#: gnu/packages/web.scm:1815 +#: gnu/packages/web.scm:1856 msgid "" "This plugin enhances the standard Catalyst debug screen by\n" "including a stack trace of your application up to the point where the error\n" @@ -18833,11 +20213,11 @@ msgid "" "number, file name, and code context surrounding the line number." msgstr "" -#: gnu/packages/web.scm:1843 +#: gnu/packages/web.scm:1884 msgid "Simple serving of static pages" msgstr "" -#: gnu/packages/web.scm:1844 +#: gnu/packages/web.scm:1885 msgid "" "The Static::Simple plugin is designed to make serving static\n" "content in your application during development quick and easy, without\n" @@ -18848,11 +20228,11 @@ msgid "" "MIME type directly to the browser, without being processed through Catalyst." msgstr "" -#: gnu/packages/web.scm:1912 +#: gnu/packages/web.scm:1947 msgid "The Catalyst Framework Runtime" msgstr "" -#: gnu/packages/web.scm:1913 +#: gnu/packages/web.scm:1948 msgid "" "Catalyst is a modern framework for making web applications.\n" "It is designed to make it easy to manage the various tasks you need to do to\n" @@ -18860,11 +20240,11 @@ msgid "" "\"plug in\" existing Perl modules that do what you need." msgstr "" -#: gnu/packages/web.scm:1944 +#: gnu/packages/web.scm:1979 msgid "Replace request base with value passed by HTTP proxy" msgstr "" -#: gnu/packages/web.scm:1945 +#: gnu/packages/web.scm:1980 msgid "" "This module is a Moose::Role which allows you more\n" "flexibility in your application's deployment configurations when deployed\n" @@ -18872,42 +20252,42 @@ msgid "" "replaced with the contents of the X-Request-Base header." msgstr "" -#: gnu/packages/web.scm:1972 +#: gnu/packages/web.scm:2007 msgid "Download data in many formats" msgstr "" -#: gnu/packages/web.scm:1973 +#: gnu/packages/web.scm:2008 msgid "" "The purpose of this module is to provide a method for\n" "downloading data into many supportable formats. For example, downloading a\n" "table based report in a variety of formats (CSV, HTML, etc.)." msgstr "" -#: gnu/packages/web.scm:1999 +#: gnu/packages/web.scm:2034 msgid "Catalyst JSON view" msgstr "" -#: gnu/packages/web.scm:2000 +#: gnu/packages/web.scm:2035 msgid "" "Catalyst::View::JSON is a Catalyst View handler that returns\n" "stash data in JSON format." msgstr "" -#: gnu/packages/web.scm:2026 +#: gnu/packages/web.scm:2061 msgid "Template View Class" msgstr "" -#: gnu/packages/web.scm:2027 +#: gnu/packages/web.scm:2062 msgid "" "This module is a Catalyst view class for the Template\n" "Toolkit." msgstr "" -#: gnu/packages/web.scm:2056 +#: gnu/packages/web.scm:2091 msgid "Trait Loading and Resolution for Catalyst Components" msgstr "" -#: gnu/packages/web.scm:2057 +#: gnu/packages/web.scm:2092 msgid "" "Adds a \"COMPONENT\" in Catalyst::Component method to your\n" "Catalyst component base class that reads the optional \"traits\" parameter\n" @@ -18916,31 +20296,31 @@ msgid "" "MooseX::Traits::Pluggable." msgstr "" -#: gnu/packages/web.scm:2082 +#: gnu/packages/web.scm:2117 msgid "Apply roles to Catalyst classes" msgstr "" -#: gnu/packages/web.scm:2083 +#: gnu/packages/web.scm:2118 msgid "" "CatalystX::RoleApplicator applies roles to Catalyst\n" "application classes." msgstr "" -#: gnu/packages/web.scm:2110 +#: gnu/packages/web.scm:2145 msgid "Catalyst development server with Starman" msgstr "" -#: gnu/packages/web.scm:2111 +#: gnu/packages/web.scm:2146 msgid "" "This module provides a Catalyst extension to replace the\n" "development server with Starman." msgstr "" -#: gnu/packages/web.scm:2135 +#: gnu/packages/web.scm:2170 msgid "Handle Common Gateway Interface requests and responses" msgstr "" -#: gnu/packages/web.scm:2136 +#: gnu/packages/web.scm:2171 msgid "" "CGI.pm is a stable, complete and mature solution for\n" "processing and preparing HTTP requests and responses. Major features include\n" @@ -18949,62 +20329,72 @@ msgid "" "headers." msgstr "" -#: gnu/packages/web.scm:2164 +#: gnu/packages/web.scm:2196 +msgid "Generate and process stateful forms" +msgstr "" + +#: gnu/packages/web.scm:2198 +msgid "" +"@code{CGI::FormBuilder} provides an easy way to generate and process CGI\n" +"form-based applications." +msgstr "" + +#: gnu/packages/web.scm:2223 msgid "Persistent session data in CGI applications" msgstr "" -#: gnu/packages/web.scm:2166 +#: gnu/packages/web.scm:2225 msgid "" "@code{CGI::Session} provides modular session management system across\n" "HTTP requests." msgstr "" -#: gnu/packages/web.scm:2187 +#: gnu/packages/web.scm:2248 msgid "CGI interface that is CGI.pm compliant" msgstr "" -#: gnu/packages/web.scm:2188 +#: gnu/packages/web.scm:2249 msgid "" "CGI::Simple provides a relatively lightweight drop in\n" "replacement for CGI.pm. It shares an identical OO interface to CGI.pm for\n" "parameter parsing, file upload, cookie handling and header generation." msgstr "" -#: gnu/packages/web.scm:2209 +#: gnu/packages/web.scm:2270 msgid "Build structures from CGI data" msgstr "" -#: gnu/packages/web.scm:2210 +#: gnu/packages/web.scm:2271 msgid "" "This is a module for building structured data from CGI\n" "inputs, in a manner reminiscent of how PHP does." msgstr "" -#: gnu/packages/web.scm:2233 +#: gnu/packages/web.scm:2294 msgid "Date conversion routines" msgstr "" -#: gnu/packages/web.scm:2234 +#: gnu/packages/web.scm:2295 msgid "" "This module provides functions that deal with the date\n" "formats used by the HTTP protocol." msgstr "" -#: gnu/packages/web.scm:2254 +#: gnu/packages/web.scm:2315 msgid "MD5 sums for files and urls" msgstr "" -#: gnu/packages/web.scm:2255 +#: gnu/packages/web.scm:2316 msgid "" "Digest::MD5::File is a Perl extension for getting MD5 sums\n" "for files and urls." msgstr "" -#: gnu/packages/web.scm:2273 +#: gnu/packages/web.scm:2334 msgid "Perl locale encoding determination" msgstr "" -#: gnu/packages/web.scm:2275 +#: gnu/packages/web.scm:2336 msgid "" "The POSIX locale system is used to specify both the language\n" "conventions requested by the user and the preferred character set to\n" @@ -19016,110 +20406,110 @@ msgid "" "with Encode::decode(locale => $string)." msgstr "" -#: gnu/packages/web.scm:2310 +#: gnu/packages/web.scm:2371 msgid "Syndication feed auto-discovery" msgstr "" -#: gnu/packages/web.scm:2311 +#: gnu/packages/web.scm:2372 msgid "" "@code{Feed::Find} implements feed auto-discovery for finding\n" "syndication feeds, given a URI. It will discover the following feed formats:\n" "RSS 0.91, RSS 1.0, RSS 2.0, Atom." msgstr "" -#: gnu/packages/web.scm:2332 +#: gnu/packages/web.scm:2393 msgid "Perl directory listing parser" msgstr "" -#: gnu/packages/web.scm:2334 +#: gnu/packages/web.scm:2395 msgid "" "The File::Listing module exports a single function called parse_dir(),\n" "which can be used to parse directory listings." msgstr "" -#: gnu/packages/web.scm:2366 +#: gnu/packages/web.scm:2427 msgid "Stock and mutual fund quotes" msgstr "" -#: gnu/packages/web.scm:2368 +#: gnu/packages/web.scm:2429 msgid "" "Finance::Quote gets stock quotes from various internet sources, including\n" "Yahoo! Finance, Fidelity Investments, and the Australian Stock Exchange." msgstr "" -#: gnu/packages/web.scm:2390 +#: gnu/packages/web.scm:2451 msgid "Perl extension providing access to the GSSAPIv2 library" msgstr "" -#: gnu/packages/web.scm:2391 +#: gnu/packages/web.scm:2452 msgid "" "This is a Perl extension for using GSSAPI C bindings as\n" "described in RFC 2744." msgstr "" -#: gnu/packages/web.scm:2411 +#: gnu/packages/web.scm:2472 msgid "Manipulate tables of HTML::Element" msgstr "" -#: gnu/packages/web.scm:2413 +#: gnu/packages/web.scm:2474 msgid "" "HTML::Element::Extended is a Perl extension for manipulating a table\n" "composed of HTML::Element style components." msgstr "" -#: gnu/packages/web.scm:2437 +#: gnu/packages/web.scm:2498 msgid "Perl class representing an HTML form element" msgstr "" -#: gnu/packages/web.scm:2438 +#: gnu/packages/web.scm:2499 msgid "" "Objects of the HTML::Form class represents a single HTML\n" "
...
instance." msgstr "" -#: gnu/packages/web.scm:2468 +#: gnu/packages/web.scm:2530 msgid "Perl extension for scrubbing/sanitizing html" msgstr "" -#: gnu/packages/web.scm:2470 +#: gnu/packages/web.scm:2532 msgid "@code{HTML::Scrubber} Perl extension for scrubbing/sanitizing HTML." msgstr "" -#: gnu/packages/web.scm:2491 +#: gnu/packages/web.scm:2553 msgid "Check for HTML errors in a string or file" msgstr "Kontroller for HTML-fejl i en streng eller fil" -#: gnu/packages/web.scm:2492 +#: gnu/packages/web.scm:2554 msgid "" "HTML::Lint is a pure-Perl HTML parser and checker for\n" "syntactic legitmacy." msgstr "" -#: gnu/packages/web.scm:2513 +#: gnu/packages/web.scm:2575 msgid "Extract contents from HTML tables" msgstr "Udtræk indhold fra HTML-tabeller" -#: gnu/packages/web.scm:2515 +#: gnu/packages/web.scm:2577 msgid "" "HTML::TableExtract is a Perl module for extracting the content contained\n" "in tables within an HTML document, either as text or encoded element trees." msgstr "" -#: gnu/packages/web.scm:2540 +#: gnu/packages/web.scm:2602 msgid "Work with HTML in a DOM-like tree structure" msgstr "Arbejd med HTML i en DOM-lignende træstruktur" -#: gnu/packages/web.scm:2541 +#: gnu/packages/web.scm:2603 msgid "" "This distribution contains a suite of modules for\n" "representing, creating, and extracting information from HTML syntax trees." msgstr "" -#: gnu/packages/web.scm:2562 +#: gnu/packages/web.scm:2624 msgid "Perl HTML parser class" msgstr "" -#: gnu/packages/web.scm:2564 +#: gnu/packages/web.scm:2626 msgid "" "Objects of the HTML::Parser class will recognize markup and separate\n" "it from plain text (alias data content) in HTML documents. As different\n" @@ -19127,21 +20517,21 @@ msgid "" "are invoked." msgstr "" -#: gnu/packages/web.scm:2584 +#: gnu/packages/web.scm:2646 msgid "Perl data tables useful in parsing HTML" msgstr "" -#: gnu/packages/web.scm:2586 +#: gnu/packages/web.scm:2648 msgid "" "The HTML::Tagset module contains several data tables useful in various\n" "kinds of HTML parsing operations." msgstr "" -#: gnu/packages/web.scm:2605 +#: gnu/packages/web.scm:2667 msgid "HTML-like templates" msgstr "" -#: gnu/packages/web.scm:2607 +#: gnu/packages/web.scm:2669 msgid "" "This module attempts to make using HTML templates simple and natural.\n" "It extends standard HTML with a few new HTML-esque tags: @code{},\n" @@ -19152,72 +20542,72 @@ msgid "" "you to separate design from the data." msgstr "" -#: gnu/packages/web.scm:2635 +#: gnu/packages/web.scm:2697 msgid "HTTP Body Parser" msgstr "" -#: gnu/packages/web.scm:2636 +#: gnu/packages/web.scm:2698 msgid "" "HTTP::Body parses chunks of HTTP POST data and supports\n" "application/octet-stream, application/json, application/x-www-form-urlencoded,\n" "and multipart/form-data." msgstr "" -#: gnu/packages/web.scm:2663 +#: gnu/packages/web.scm:2725 msgid "Minimalist HTTP user agent cookie jar" msgstr "" -#: gnu/packages/web.scm:2664 +#: gnu/packages/web.scm:2726 msgid "" "This module implements a minimalist HTTP user agent cookie\n" "jar in conformance with RFC 6265 ." msgstr "" -#: gnu/packages/web.scm:2684 +#: gnu/packages/web.scm:2746 msgid "Perl HTTP cookie jars" msgstr "" -#: gnu/packages/web.scm:2686 +#: gnu/packages/web.scm:2748 msgid "" "The HTTP::Cookies class is for objects that represent a cookie jar,\n" "that is, a database of all the HTTP cookies that a given LWP::UserAgent\n" "object knows about." msgstr "" -#: gnu/packages/web.scm:2708 +#: gnu/packages/web.scm:2770 msgid "Perl simple http server class" msgstr "" -#: gnu/packages/web.scm:2710 +#: gnu/packages/web.scm:2772 msgid "" "Instances of the HTTP::Daemon class are HTTP/1.1 servers that listen\n" "on a socket for incoming requests. The HTTP::Daemon is a subclass of\n" "IO::Socket::INET, so you can perform socket operations directly on it too." msgstr "" -#: gnu/packages/web.scm:2729 +#: gnu/packages/web.scm:2791 msgid "Perl date conversion routines" msgstr "" -#: gnu/packages/web.scm:2731 +#: gnu/packages/web.scm:2793 msgid "" "The HTTP::Date module provides functions that deal with date formats\n" "used by the HTTP protocol (and then some more)." msgstr "" -#: gnu/packages/web.scm:2755 +#: gnu/packages/web.scm:2819 msgid "Perl HTTP style message" msgstr "" -#: gnu/packages/web.scm:2757 +#: gnu/packages/web.scm:2821 msgid "An HTTP::Message object contains some headers and a content body." msgstr "" -#: gnu/packages/web.scm:2776 +#: gnu/packages/web.scm:2840 msgid "Perl http content negotiation" msgstr "" -#: gnu/packages/web.scm:2778 +#: gnu/packages/web.scm:2842 msgid "" "The HTTP::Negotiate module provides a complete implementation of the\n" "HTTP content negotiation algorithm specified in\n" @@ -19227,11 +20617,11 @@ msgid "" "fields in the request." msgstr "" -#: gnu/packages/web.scm:2803 +#: gnu/packages/web.scm:2867 msgid "Parse HTTP/1.1 requests" msgstr "" -#: gnu/packages/web.scm:2804 +#: gnu/packages/web.scm:2868 msgid "" "This is an HTTP request parser. It takes chunks of text as\n" "received and returns a 'hint' as to what is required, or returns the\n" @@ -19239,74 +20629,74 @@ msgid "" "supported." msgstr "" -#: gnu/packages/web.scm:2826 +#: gnu/packages/web.scm:2890 msgid "Fast HTTP request parser" msgstr "" -#: gnu/packages/web.scm:2827 +#: gnu/packages/web.scm:2891 msgid "" "HTTP::Parser::XS is a fast, primitive HTTP request/response\n" "parser." msgstr "" -#: gnu/packages/web.scm:2848 +#: gnu/packages/web.scm:2912 msgid "Set up a CGI environment from an HTTP::Request" msgstr "" -#: gnu/packages/web.scm:2849 +#: gnu/packages/web.scm:2913 msgid "" "This module provides a convenient way to set up a CGI\n" "environment from an HTTP::Request." msgstr "" -#: gnu/packages/web.scm:2882 +#: gnu/packages/web.scm:2946 msgid "Lightweight HTTP server" msgstr "Simpel HTTP-server" -#: gnu/packages/web.scm:2883 +#: gnu/packages/web.scm:2947 msgid "" "HTTP::Server::Simple is a simple standalone HTTP daemon with\n" "no non-core module dependencies. It can be used for building a standalone\n" "http-based UI to your existing tools." msgstr "" -#: gnu/packages/web.scm:2908 +#: gnu/packages/web.scm:2972 msgid "HTTP/1.1 client" msgstr "" -#: gnu/packages/web.scm:2909 +#: gnu/packages/web.scm:2973 msgid "" "This is a very simple HTTP/1.1 client, designed for doing\n" "simple requests without the overhead of a large framework like LWP::UserAgent.\n" "It supports proxies and redirection. It also correctly resumes after EINTR." msgstr "" -#: gnu/packages/web.scm:2928 +#: gnu/packages/web.scm:2992 msgid "Perl module to open an HTML file with automatic charset detection" msgstr "" -#: gnu/packages/web.scm:2930 +#: gnu/packages/web.scm:2994 msgid "" "IO::HTML provides an easy way to open a file containing HTML while\n" "automatically determining its encoding. It uses the HTML5 encoding sniffing\n" "algorithm specified in section 8.2.2.1 of the draft standard." msgstr "" -#: gnu/packages/web.scm:2950 +#: gnu/packages/web.scm:3014 msgid "Family-neutral IP socket supporting both IPv4 and IPv6" msgstr "" -#: gnu/packages/web.scm:2951 +#: gnu/packages/web.scm:3015 msgid "" "This module provides a protocol-independent way to use IPv4\n" "and IPv6 sockets, intended as a replacement for IO::Socket::INET." msgstr "" -#: gnu/packages/web.scm:2973 +#: gnu/packages/web.scm:3037 msgid "Nearly transparent SSL encapsulation for IO::Socket::INET" msgstr "" -#: gnu/packages/web.scm:2975 +#: gnu/packages/web.scm:3039 msgid "" "IO::Socket::SSL makes using SSL/TLS much easier by wrapping the\n" "necessary functionality into the familiar IO::Socket interface and providing\n" @@ -19315,11 +20705,11 @@ msgid "" "select or poll." msgstr "" -#: gnu/packages/web.scm:3009 +#: gnu/packages/web.scm:3078 msgid "Perl modules for the WWW" msgstr "Perlmoduler for www" -#: gnu/packages/web.scm:3011 +#: gnu/packages/web.scm:3080 msgid "" "The libwww-perl collection is a set of Perl modules which provides a\n" "simple and consistent application programming interface to the\n" @@ -19329,11 +20719,11 @@ msgid "" "help you implement simple HTTP servers." msgstr "" -#: gnu/packages/web.scm:3039 +#: gnu/packages/web.scm:3108 msgid "Checks whether your process has access to the web" msgstr "" -#: gnu/packages/web.scm:3040 +#: gnu/packages/web.scm:3109 msgid "" "This module attempts to answer, as accurately as it can, one\n" "of the nastiest technical questions there is: am I on the internet?\n" @@ -19343,11 +20733,11 @@ msgid "" "not have DNS. We might not have a network card at all!" msgstr "" -#: gnu/packages/web.scm:3062 +#: gnu/packages/web.scm:3131 msgid "Perl module to guess the media type for a file or a URL" msgstr "" -#: gnu/packages/web.scm:3064 +#: gnu/packages/web.scm:3133 #, scheme-format msgid "" "The LWP::MediaTypes module provides functions for handling media (also\n" @@ -19356,21 +20746,21 @@ msgid "" "exists it is used instead." msgstr "" -#: gnu/packages/web.scm:3090 +#: gnu/packages/web.scm:3162 msgid "HTTPS support for LWP::UserAgent" msgstr "" -#: gnu/packages/web.scm:3091 +#: gnu/packages/web.scm:3163 msgid "" "The LWP::Protocol::https module provides support for using\n" "https schemed URLs with LWP." msgstr "" -#: gnu/packages/web.scm:3111 +#: gnu/packages/web.scm:3183 msgid "Virtual browser that retries errors" msgstr "" -#: gnu/packages/web.scm:3112 +#: gnu/packages/web.scm:3184 msgid "" "LWP::UserAgent::Determined works just like LWP::UserAgent,\n" "except that when you use it to get a web page but run into a\n" @@ -19378,19 +20768,19 @@ msgid "" "and retry a few times." msgstr "" -#: gnu/packages/web.scm:3157 +#: gnu/packages/web.scm:3229 msgid "Perl interface to Amazon S3" msgstr "" -#: gnu/packages/web.scm:3158 +#: gnu/packages/web.scm:3230 msgid "This module provides a Perlish interface to Amazon S3." msgstr "" -#: gnu/packages/web.scm:3178 +#: gnu/packages/web.scm:3250 msgid "Perl low-level HTTP connection (client)" msgstr "" -#: gnu/packages/web.scm:3180 +#: gnu/packages/web.scm:3252 msgid "" "The Net::HTTP class is a low-level HTTP client. An instance of the\n" "Net::HTTP class represents a connection to an HTTP server. The HTTP protocol\n" @@ -19398,11 +20788,11 @@ msgid "" "HTTP/1.1." msgstr "" -#: gnu/packages/web.scm:3200 +#: gnu/packages/web.scm:3272 msgid "Extensible Perl server engine" msgstr "" -#: gnu/packages/web.scm:3201 +#: gnu/packages/web.scm:3273 msgid "" "Net::Server is an extensible, generic Perl server engine.\n" "It attempts to be a generic server as in Net::Daemon and NetServer::Generic.\n" @@ -19416,19 +20806,19 @@ msgid "" "or to multiple server ports." msgstr "" -#: gnu/packages/web.scm:3229 +#: gnu/packages/web.scm:3301 msgid "SSL support for Net::SMTP" msgstr "SSL-understøttelse for Net::SMTP" -#: gnu/packages/web.scm:3230 +#: gnu/packages/web.scm:3302 msgid "SSL support for Net::SMTP." msgstr "SSL-understøttelse for Net::SMTP." -#: gnu/packages/web.scm:3264 +#: gnu/packages/web.scm:3336 msgid "Perl Superglue for Web frameworks and servers (PSGI toolkit)" msgstr "" -#: gnu/packages/web.scm:3265 +#: gnu/packages/web.scm:3337 msgid "" "Plack is a set of tools for using the PSGI stack. It\n" "contains middleware components, a reference server, and utilities for Web\n" @@ -19436,21 +20826,21 @@ msgid "" "WSGI." msgstr "" -#: gnu/packages/web.scm:3291 +#: gnu/packages/web.scm:3363 msgid "Plack::Middleware which sets body for redirect response" msgstr "" -#: gnu/packages/web.scm:3292 +#: gnu/packages/web.scm:3364 msgid "" "This module sets the body in redirect response, if it's not\n" "already set." msgstr "" -#: gnu/packages/web.scm:3315 +#: gnu/packages/web.scm:3387 msgid "Override REST methods to Plack apps via POST" msgstr "" -#: gnu/packages/web.scm:3316 +#: gnu/packages/web.scm:3388 msgid "" "This middleware allows for POST requests that pretend to be\n" "something else: by adding either a header named X-HTTP-Method-Override to the\n" @@ -19458,72 +20848,72 @@ msgid "" "can say what method it actually meant." msgstr "" -#: gnu/packages/web.scm:3340 +#: gnu/packages/web.scm:3412 msgid "Plack::Middleware which removes body for HTTP response" msgstr "" -#: gnu/packages/web.scm:3341 +#: gnu/packages/web.scm:3413 msgid "" "This module removes the body in an HTTP response if it's not\n" "required." msgstr "" -#: gnu/packages/web.scm:3364 +#: gnu/packages/web.scm:3436 msgid "Supports app to run as a reverse proxy backend" msgstr "" -#: gnu/packages/web.scm:3365 +#: gnu/packages/web.scm:3437 msgid "" "Plack::Middleware::ReverseProxy resets some HTTP headers,\n" "which are changed by reverse-proxy. You can specify the reverse proxy address\n" "and stop fake requests using 'enable_if' directive in your app.psgi." msgstr "" -#: gnu/packages/web.scm:3386 +#: gnu/packages/web.scm:3458 msgid "Run HTTP tests on external live servers" msgstr "" -#: gnu/packages/web.scm:3387 +#: gnu/packages/web.scm:3459 msgid "" "This module allows your to run your Plack::Test tests\n" "against an external server instead of just against a local application through\n" "either mocked HTTP or a locally spawned server." msgstr "" -#: gnu/packages/web.scm:3409 +#: gnu/packages/web.scm:3481 msgid "Testing TCP programs" msgstr "Testning af TCP-programmer" -#: gnu/packages/web.scm:3410 +#: gnu/packages/web.scm:3482 msgid "Test::TCP is test utilities for TCP/IP programs." msgstr "Test::TCP er testredskaber for TCP/IP-programmer." -#: gnu/packages/web.scm:3440 +#: gnu/packages/web.scm:3507 msgid "Testing-specific WWW::Mechanize subclass" msgstr "" -#: gnu/packages/web.scm:3441 +#: gnu/packages/web.scm:3508 msgid "" "Test::WWW::Mechanize is a subclass of the Perl module\n" "WWW::Mechanize that incorporates features for web application testing." msgstr "" -#: gnu/packages/web.scm:3475 +#: gnu/packages/web.scm:3542 msgid "Test::WWW::Mechanize for Catalyst" msgstr "Test::WWW::Mechanize for Catalyst" -#: gnu/packages/web.scm:3476 +#: gnu/packages/web.scm:3543 msgid "" "The Test::WWW::Mechanize::Catalyst module meshes the\n" "Test::WWW:Mechanize module and the Catalyst web application framework to allow\n" "testing of Catalyst applications without needing to start up a web server." msgstr "" -#: gnu/packages/web.scm:3500 +#: gnu/packages/web.scm:3567 msgid "Test PSGI programs using WWW::Mechanize" msgstr "" -#: gnu/packages/web.scm:3501 +#: gnu/packages/web.scm:3568 msgid "" "PSGI is a specification to decouple web server environments\n" "from web application framework code. Test::WWW::Mechanize is a subclass of\n" @@ -19532,33 +20922,33 @@ msgid "" "applications." msgstr "" -#: gnu/packages/web.scm:3524 +#: gnu/packages/web.scm:3591 msgid "Perl Uniform Resource Identifiers (absolute and relative)" msgstr "" -#: gnu/packages/web.scm:3526 +#: gnu/packages/web.scm:3593 msgid "" "The URI module implements the URI class. Objects of this class\n" "represent \"Uniform Resource Identifier references\" as specified in RFC 2396\n" "and updated by RFC 2732." msgstr "" -#: gnu/packages/web.scm:3550 +#: gnu/packages/web.scm:3617 msgid "Smart URI fetching/caching" msgstr "" -#: gnu/packages/web.scm:3551 +#: gnu/packages/web.scm:3618 msgid "" "@code{URI::Fetch} is a smart client for fetching HTTP pages,\n" "notably syndication feeds (RSS, Atom, and others), in an intelligent, bandwidth-\n" "and time-saving way." msgstr "" -#: gnu/packages/web.scm:3574 +#: gnu/packages/web.scm:3641 msgid "Find URIs in arbitrary text" msgstr "" -#: gnu/packages/web.scm:3575 +#: gnu/packages/web.scm:3642 msgid "" "This module finds URIs and URLs (according to what URI.pm\n" "considers a URI) in plain text. It only finds URIs which include a\n" @@ -19566,11 +20956,11 @@ msgid "" "URI::Find::Schemeless. For a command-line interface, urifind is provided." msgstr "" -#: gnu/packages/web.scm:3597 +#: gnu/packages/web.scm:3664 msgid "WebSocket support for URI package" msgstr "" -#: gnu/packages/web.scm:3598 +#: gnu/packages/web.scm:3665 msgid "" "With this module, the URI package provides the same set of\n" "methods for WebSocket URIs as it does for HTTP URIs." @@ -19578,51 +20968,51 @@ msgstr "" "Med dette modul tilbyder URI-pakken det samme sæt af\n" "metoder for WebSocket URI'er som den gør for HTTP URI'er." -#: gnu/packages/web.scm:3622 +#: gnu/packages/web.scm:3689 msgid "Object for handling URI templates" msgstr "Objekt til håndtering af URI-skabeloner" -#: gnu/packages/web.scm:3623 +#: gnu/packages/web.scm:3690 msgid "" "This perl module provides a wrapper around URI templates as described in\n" "RFC 6570." msgstr "" -#: gnu/packages/web.scm:3655 +#: gnu/packages/web.scm:3722 msgid "Perl extension interface for libcurl" msgstr "Perludvidelsesgrænseflade for libcurl" -#: gnu/packages/web.scm:3657 +#: gnu/packages/web.scm:3724 msgid "" "This is a Perl extension interface for the libcurl file downloading\n" "library." msgstr "" -#: gnu/packages/web.scm:3691 +#: gnu/packages/web.scm:3758 msgid "Web browsing in a Perl object" msgstr "" -#: gnu/packages/web.scm:3692 +#: gnu/packages/web.scm:3759 msgid "" "WWW::Mechanize is a Perl module for stateful programmatic\n" "web browsing, used for automating interaction with websites." msgstr "" -#: gnu/packages/web.scm:3728 +#: gnu/packages/web.scm:3795 msgid "Search A9 OpenSearch compatible engines" msgstr "" -#: gnu/packages/web.scm:3730 +#: gnu/packages/web.scm:3797 msgid "" "@code{WWW::OpenSearch} is a module to search @url{A9's OpenSearch,\n" "http://opensearch.a9.com} compatible search engines." msgstr "" -#: gnu/packages/web.scm:3750 +#: gnu/packages/web.scm:3817 msgid "Perl database of robots.txt-derived permissions" msgstr "" -#: gnu/packages/web.scm:3752 +#: gnu/packages/web.scm:3819 msgid "" "The WWW::RobotRules module parses /robots.txt files as specified in\n" "\"A Standard for Robot Exclusion\", at\n" @@ -19631,21 +21021,21 @@ msgid "" "their web site." msgstr "" -#: gnu/packages/web.scm:3775 +#: gnu/packages/web.scm:3842 msgid "Parse feeds in Python" msgstr "" -#: gnu/packages/web.scm:3777 +#: gnu/packages/web.scm:3844 msgid "" "Universal feed parser which handles RSS 0.9x, RSS 1.0, RSS 2.0,\n" "CDF, Atom 0.3, and Atom 1.0 feeds." msgstr "" -#: gnu/packages/web.scm:3802 +#: gnu/packages/web.scm:3871 msgid "HTTP and WebSocket server library for R" msgstr "" -#: gnu/packages/web.scm:3804 +#: gnu/packages/web.scm:3873 msgid "" "The httpuv package provides low-level socket and protocol support for\n" "handling HTTP and WebSocket requests directly from within R. It is primarily\n" @@ -19653,11 +21043,11 @@ msgid "" "particularly easy to create complete web applications using httpuv alone." msgstr "" -#: gnu/packages/web.scm:3825 +#: gnu/packages/web.scm:3894 msgid "Robust, high performance JSON parser and generator for R" msgstr "" -#: gnu/packages/web.scm:3827 +#: gnu/packages/web.scm:3896 msgid "" "The jsonlite package provides a fast JSON parser and generator optimized\n" "for statistical data and the web. It offers flexible, robust, high\n" @@ -19669,41 +21059,41 @@ msgid "" "in systems and applications." msgstr "" -#: gnu/packages/web.scm:3856 +#: gnu/packages/web.scm:3923 msgid "Simple HTTP server to serve static files or dynamic documents" msgstr "" -#: gnu/packages/web.scm:3858 +#: gnu/packages/web.scm:3925 msgid "" "Servr provides an HTTP server in R to serve static files, or dynamic\n" "documents that can be converted to HTML files (e.g., R Markdown) under a given\n" "directory." msgstr "" -#: gnu/packages/web.scm:3892 +#: gnu/packages/web.scm:3959 msgid "R tools for HTML" msgstr "R-værktøjer for HTML" -#: gnu/packages/web.scm:3894 +#: gnu/packages/web.scm:3961 msgid "This package provides tools for HTML generation and output in R." msgstr "Denne pakke tilbyder værktøjer for HTML-oprettelse og uddata i R." -#: gnu/packages/web.scm:3913 +#: gnu/packages/web.scm:3980 msgid "HTML Widgets for R" msgstr "HTML-kontroller for R" -#: gnu/packages/web.scm:3915 +#: gnu/packages/web.scm:3982 msgid "" "HTML widgets is a framework for creating HTML widgets that render in\n" "various contexts including the R console, R Markdown documents, and Shiny web\n" "applications." msgstr "" -#: gnu/packages/web.scm:3942 +#: gnu/packages/web.scm:4009 msgid "Advanced tables for Markdown/HTML" -msgstr "" +msgstr "Avancerede tabeller for Markdown/HTML" -#: gnu/packages/web.scm:3944 +#: gnu/packages/web.scm:4011 msgid "" "This package provides functions to build tables with advanced layout\n" "elements such as row spanners, column spanners, table spanners, zebra\n" @@ -19714,11 +21104,11 @@ msgid "" "LaTeX." msgstr "" -#: gnu/packages/web.scm:3981 +#: gnu/packages/web.scm:4048 msgid "HTTP client for R" msgstr "HTTP-klient for R" -#: gnu/packages/web.scm:3983 +#: gnu/packages/web.scm:4050 msgid "" "The @code{curl()} and @code{curl_download()} functions provide highly\n" "configurable drop-in replacements for base @code{url()} and\n" @@ -19729,31 +21119,35 @@ msgid "" "callback or connection interfaces." msgstr "" -#: gnu/packages/web.scm:4005 +#: gnu/packages/web.scm:4072 msgid "Output R objects in HTML format" -msgstr "" +msgstr "Fremstil R-objekter i HTML-format" -#: gnu/packages/web.scm:4007 +#: gnu/packages/web.scm:4074 msgid "" "This package provides easy-to-use and versatile functions to output R\n" "objects in HTML format." msgstr "" +"Denne pakke tilbyder nemme og alsidige funktioner til at fremstille R-\n" +"objekter i HTML-format." -#: gnu/packages/web.scm:4024 +#: gnu/packages/web.scm:4091 msgid "JSON library for R" -msgstr "" +msgstr "JSON-bibliotek for R" -#: gnu/packages/web.scm:4026 +#: gnu/packages/web.scm:4093 msgid "" "This package provides functions to convert R objects into JSON objects\n" "and vice-versa." msgstr "" +"Denne pakke tilbyder funktioner til at konvertere R-objekter til JSON-objekter\n" +"og omvendt." -#: gnu/packages/web.scm:4055 +#: gnu/packages/web.scm:4118 msgid "HTML5 parsing library" msgstr "HTML5-fortolkningsbibliotek" -#: gnu/packages/web.scm:4057 +#: gnu/packages/web.scm:4120 msgid "" "Gumbo is an implementation of the HTML5 parsing algorithm implemented as\n" "a pure C99 library." @@ -19761,22 +21155,22 @@ msgstr "" "Gumbo er en implementering af HTML5-fortolkningsalgoritmen implenteret\n" "som et rent C99-bibliotek." -#: gnu/packages/web.scm:4128 +#: gnu/packages/web.scm:4191 msgid "Application container server" -msgstr "" +msgstr "Programcontainerserver" -#: gnu/packages/web.scm:4130 +#: gnu/packages/web.scm:4193 msgid "" "uWSGI presents a complete stack for networked/clustered web applications,\n" "implementing message/object passing, caching, RPC and process management.\n" "It uses the uwsgi protocol for all the networking/interprocess communications." msgstr "" -#: gnu/packages/web.scm:4160 +#: gnu/packages/web.scm:4219 msgid "Command-line JSON processor" msgstr "" -#: gnu/packages/web.scm:4161 +#: gnu/packages/web.scm:4220 msgid "" "jq is like sed for JSON data – you can use it to slice and\n" "filter and map and transform structured data with the same ease that sed, awk,\n" @@ -19786,106 +21180,106 @@ msgid "" "you'd expect." msgstr "" -#: gnu/packages/web.scm:4200 +#: gnu/packages/web.scm:4259 msgid "Library for mocking web service APIs which use HTTP or HTTPS" msgstr "" -#: gnu/packages/web.scm:4202 +#: gnu/packages/web.scm:4261 msgid "" "Uhttpmock is a project for mocking web service APIs which use HTTP or\n" "HTTPS. It provides a library, libuhttpmock, which implements recording and\n" "playback of HTTP request/response traces." msgstr "" -#: gnu/packages/web.scm:4237 +#: gnu/packages/web.scm:4296 msgid "Single file web server" msgstr "" -#: gnu/packages/web.scm:4238 +#: gnu/packages/web.scm:4297 msgid "" "Woof (Web Offer One File) is a small simple web server that\n" "can easily be invoked on a single file. Your partner can access the file with\n" "tools they trust (e.g. wget)." msgstr "" -#: gnu/packages/web.scm:4264 +#: gnu/packages/web.scm:4323 msgid "Build system for the Netsurf project" msgstr "" -#: gnu/packages/web.scm:4266 +#: gnu/packages/web.scm:4325 msgid "" "This package provides the shared build system for Netsurf project\n" "libraries." msgstr "" -#: gnu/packages/web.scm:4301 +#: gnu/packages/web.scm:4360 msgid "Parser building library" msgstr "Fortolkerkompileringsbibliotek" -#: gnu/packages/web.scm:4303 +#: gnu/packages/web.scm:4362 msgid "" "LibParserUtils is a library for building efficient parsers, written in\n" "C. It is developed as part of the NetSurf project." msgstr "" -#: gnu/packages/web.scm:4331 +#: gnu/packages/web.scm:4390 msgid "HTML5 compliant parsing library" msgstr "HTML5-overholdnede fortolkningsbibliotek" -#: gnu/packages/web.scm:4333 +#: gnu/packages/web.scm:4392 msgid "" "Hubbub is an HTML5 compliant parsing library, written in C, which can\n" "parse both valid and invalid web content. It is developed as part of the\n" "NetSurf project." msgstr "" -#: gnu/packages/web.scm:4408 +#: gnu/packages/web.scm:4473 msgid "Wiki compiler, capable of generating HTML" msgstr "" -#: gnu/packages/web.scm:4410 +#: gnu/packages/web.scm:4475 msgid "" "Ikiwiki is a wiki compiler, capable of generating a static set of web\n" "pages, but also incorporating dynamic features like a web based editor and\n" "commenting." msgstr "" -#: gnu/packages/web.scm:4434 +#: gnu/packages/web.scm:4499 msgid "String internment library" msgstr "" -#: gnu/packages/web.scm:4436 +#: gnu/packages/web.scm:4501 msgid "" "LibWapcaplet provides a reference counted string internment system\n" "designed to store small strings and allow rapid comparison of them. It is\n" "developed as part of the Netsurf project." msgstr "" -#: gnu/packages/web.scm:4463 +#: gnu/packages/web.scm:4528 msgid "CSS parser and selection library" msgstr "CSS-fortolker- og markeringsbibliotek" -#: gnu/packages/web.scm:4465 +#: gnu/packages/web.scm:4530 msgid "" "LibCSS is a CSS (Cascading Style Sheet) parser and selection engine,\n" "written in C. It is developed as part of the NetSurf project." msgstr "" -#: gnu/packages/web.scm:4499 +#: gnu/packages/web.scm:4564 msgid "Implementation of the W3C DOM" msgstr "Implementering af W3C DOM" -#: gnu/packages/web.scm:4501 +#: gnu/packages/web.scm:4566 msgid "" "LibDOM is an implementation of the W3C DOM, written in C. It is\n" "developed as part of the NetSurf project." msgstr "" -#: gnu/packages/web.scm:4528 +#: gnu/packages/web.scm:4593 msgid "Library for parsing SVG files" msgstr "Bibliotek til at håndtere SVG-filer" -#: gnu/packages/web.scm:4530 +#: gnu/packages/web.scm:4595 msgid "" "Libsvgtiny takes some SVG as input and returns a list of paths and texts\n" "which can be rendered easily, as defined in\n" @@ -19893,94 +21287,98 @@ msgid "" "project." msgstr "" -#: gnu/packages/web.scm:4553 +#: gnu/packages/web.scm:4618 msgid "Decoding library for BMP and ICO files" msgstr "Afkodningsbibliotek for BMP- og ICO-filer" -#: gnu/packages/web.scm:4555 +#: gnu/packages/web.scm:4620 msgid "" "Libnsbmp is a decoding library for BMP and ICO image file formats,\n" "written in C. It is developed as part of the NetSurf project." msgstr "" -#: gnu/packages/web.scm:4576 +#: gnu/packages/web.scm:4641 msgid "Decoding library for GIF files" msgstr "Afkodningsbibliotek for GIF-filer" -#: gnu/packages/web.scm:4578 +#: gnu/packages/web.scm:4643 msgid "" "Libnsgif is a decoding library for the GIF image file format, written in\n" "C. It is developed as part of the NetSurf project." msgstr "" +"Libnsgift er et afkodningsbibliotek for GIF-billedfilformatet, skrevet i\n" +"C. Det er udviklet som en del af NetSurf-projektet." -#: gnu/packages/web.scm:4599 +#: gnu/packages/web.scm:4664 msgid "Utility library for NetSurf" msgstr "Redskabsbibliotek for NetSurf" -#: gnu/packages/web.scm:4601 +#: gnu/packages/web.scm:4666 msgid "" "Libnsutils provides a small number of useful utility routines. It is\n" "developed as part of the NetSurf project." msgstr "" +"Libnsutils tilbyder et lille antal nyttige redskabsrutiner. Det er\n" +"udviklet som en del af NetSurf-projektet." -#: gnu/packages/web.scm:4622 +#: gnu/packages/web.scm:4687 msgid "Library to generate a static Public Suffix List" msgstr "Bibliotek til at oprette en statisk Public Suffix-liste" -#: gnu/packages/web.scm:4624 +#: gnu/packages/web.scm:4689 msgid "" "Libnspsl is a library to generate a static code representation of the\n" "Public Suffix List. It is developed as part of the NetSurf project." msgstr "" -#: gnu/packages/web.scm:4650 +#: gnu/packages/web.scm:4715 msgid "Generate JavaScript to DOM bindings" -msgstr "" +msgstr "Opret JavaScript- til DOM-bindinger" -#: gnu/packages/web.scm:4652 +#: gnu/packages/web.scm:4717 msgid "" "@code{nsgenbind} is a tool to generate JavaScript to DOM bindings from\n" "w3c webidl files and a binding configuration file." msgstr "" -#: gnu/packages/web.scm:4763 +#: gnu/packages/web.scm:4829 msgid "Web browser" msgstr "Internetbrowser" -#: gnu/packages/web.scm:4765 +#: gnu/packages/web.scm:4831 msgid "" "NetSurf is a lightweight web browser that has its own layout and\n" "rendering engine entirely written from scratch. It is small and capable of\n" "handling many of the web standards in use today." msgstr "" -#: gnu/packages/web.scm:4805 +#: gnu/packages/web.scm:4871 msgid "Unix command line interface to the www" msgstr "Unix-kommandolinjegrænseflade til www" -#: gnu/packages/web.scm:4806 +#: gnu/packages/web.scm:4872 msgid "" "Surfraw (Shell Users' Revolutionary Front Rage Against the Web)\n" "provides a unix command line interface to a variety of popular www search engines\n" "and similar services." msgstr "" -#: gnu/packages/web.scm:4837 +#: gnu/packages/web.scm:4903 msgid "Simple static web server" msgstr "Simpel statisk internetserver" -#: gnu/packages/web.scm:4838 +#: gnu/packages/web.scm:4904 msgid "" "darkhttpd is a simple static web server. It is\n" "standalone and does not need inetd or ucspi-tcp. It does not need any\n" "config files---you only have to specify the www root." msgstr "" -#: gnu/packages/web.scm:4868 +#: gnu/packages/web.scm:4935 msgid "Analyze Web server logs in real time" -msgstr "" +msgstr "Analyser logge for netservere i realtid" -#: gnu/packages/web.scm:4870 +#: gnu/packages/web.scm:4937 msgid "" "GoAccess is a real-time web log analyzer and interactive viewer that\n" "runs in a terminal or through your browser. It provides fast and valuable\n" @@ -19988,11 +21386,11 @@ msgid "" "on the fly." msgstr "" -#: gnu/packages/web.scm:4905 +#: gnu/packages/web.scm:4973 msgid "Tunnel data connections through HTTP requests" msgstr "" -#: gnu/packages/web.scm:4906 +#: gnu/packages/web.scm:4974 msgid "" "httptunnel creates a bidirectional virtual data connection\n" "tunnelled through HTTP (HyperText Transfer Protocol) requests. This can be\n" @@ -20001,11 +21399,11 @@ msgid "" "tools like SSH (Secure Shell) to reach the outside world." msgstr "" -#: gnu/packages/web.scm:4931 +#: gnu/packages/web.scm:5021 msgid "TLS proxy for clients or servers" msgstr "" -#: gnu/packages/web.scm:4932 +#: gnu/packages/web.scm:5022 msgid "" "Stunnel is a proxy designed to add TLS encryption\n" "functionality to existing clients and servers without any changes in the\n" @@ -20014,11 +21412,37 @@ msgid "" "deployments." msgstr "" -#: gnu/packages/web.scm:4959 -msgid "Internet services daemon" +#: gnu/packages/web.scm:5088 +msgid "Web application accelerator" msgstr "" -#: gnu/packages/web.scm:4960 +#: gnu/packages/web.scm:5090 +msgid "" +"Varnish is a high-performance HTTP accelerator. It acts as a caching\n" +"reverse proxy and load balancer. You install it in front of any server that\n" +"speaks HTTP and configure it to cache the contents through an extensive\n" +"configuration language." +msgstr "" + +#: gnu/packages/web.scm:5118 +msgid "Collection of Varnish modules" +msgstr "Samling af Varnishmoduler" + +#: gnu/packages/web.scm:5120 +msgid "" +"This package provides a collection of modules (@dfn{vmods}) for the Varnish\n" +"cache server, extending the @dfn{Varnish Configuration Language} (VCL) with\n" +"additional capabilities." +msgstr "" +"Denne pakke tilbyder en samling af moduler (@dfn{vmods}) for Varnish-\n" +"cacheserveren, der udvider @dfn{Varnish Configuration Language} (VCL) med\n" +"yderligere funktioner." + +#: gnu/packages/web.scm:5145 +msgid "Internet services daemon" +msgstr "Internettjenesedæmon" + +#: gnu/packages/web.scm:5146 msgid "" "@code{xinetd}, a more secure replacement for @code{inetd},\n" "listens for incoming requests over a network and launches the appropriate\n" @@ -20027,11 +21451,11 @@ msgid "" "used to start services with both privileged and non-privileged port numbers." msgstr "" -#: gnu/packages/web.scm:5004 +#: gnu/packages/web.scm:5190 msgid "HTML Tidy with HTML5 support" -msgstr "" +msgstr "HTML Tidy med HTML5-understøttelse" -#: gnu/packages/web.scm:5006 +#: gnu/packages/web.scm:5192 msgid "" "Tidy is a console application which corrects and cleans up\n" "HTML and XML documents by fixing markup errors and upgrading\n" @@ -20042,22 +21466,22 @@ msgid "" "functions of Tidy." msgstr "" -#: gnu/packages/web.scm:5062 +#: gnu/packages/web.scm:5256 msgid "Webserver with focus on security" -msgstr "" +msgstr "Internetserver med fokus på sikkerhed" -#: gnu/packages/web.scm:5064 +#: gnu/packages/web.scm:5258 msgid "" "Hiawatha has been written with security in mind.\n" "Features include the ability to stop SQL injections, XSS and CSRF attacks and\n" "exploit attempts." msgstr "" -#: gnu/packages/web.scm:5088 +#: gnu/packages/web.scm:5282 msgid "HTTP request and response service" msgstr "" -#: gnu/packages/web.scm:5089 +#: gnu/packages/web.scm:5283 msgid "" "Testing an HTTP Library can become difficult sometimes.\n" "@code{RequestBin} is fantastic for testing POST requests, but doesn't let you control the\n" @@ -20065,22 +21489,22 @@ msgid "" "JSON-encoded." msgstr "" -#: gnu/packages/web.scm:5117 +#: gnu/packages/web.scm:5311 msgid "Test your HTTP library against a local copy of httpbin" msgstr "" -#: gnu/packages/web.scm:5119 +#: gnu/packages/web.scm:5313 msgid "" "@code{Pytest-httpbin} creates a @code{pytest} fixture that is dependency-injected\n" "into your tests. It automatically starts up a HTTP server in a separate thread running\n" "@code{httpbin} and provides your test with the URL in the fixture." msgstr "" -#: gnu/packages/web.scm:5150 +#: gnu/packages/web.scm:5344 msgid "HTTP request/response parser for C" msgstr "" -#: gnu/packages/web.scm:5151 +#: gnu/packages/web.scm:5345 msgid "" "This is a parser for HTTP messages written in C. It parses\n" "both requests and responses. The parser is designed to be used in\n" @@ -20090,53 +21514,56 @@ msgid "" "message stream (in a web server that is per connection)." msgstr "" -#: gnu/packages/web.scm:5203 +#: gnu/packages/web.scm:5397 msgid "HTTP client mock for Python" msgstr "HTTP-klientmock for Python" -#: gnu/packages/web.scm:5204 +#: gnu/packages/web.scm:5398 msgid "" "@code{httpretty} is a helper for faking web requests,\n" "inspired by Ruby's @code{fakeweb}." msgstr "" -#: gnu/packages/web.scm:5222 +#: gnu/packages/web.scm:5416 msgid "Output JSON from a shell" -msgstr "" +msgstr "Fremstil JSON fra en skal" -#: gnu/packages/web.scm:5223 +#: gnu/packages/web.scm:5417 msgid "" "jo is a command-line utility to create JSON objects or\n" "arrays. It creates a JSON string on stdout from words provided as\n" "command-line arguments or read from stdin." msgstr "" +"Jo er et kommandolinjeredskab til at oprette JSON-objekter eller\n" +"tabeller. Redskabet oprettet en JSON-streng på standardud fra ord\n" +"tilbudt som kommandolinjeargumenter eller læst fra standardind." -#: gnu/packages/web.scm:5271 +#: gnu/packages/web.scm:5465 msgid "Command-line interface to archive.org" msgstr "Kommandolinjegrænseflade til archive.org" -#: gnu/packages/web.scm:5272 +#: gnu/packages/web.scm:5466 msgid "" "@code{ia} is a command-line tool for using\n" "@url{archive.org} from the command-line. It also emplements the\n" "internetarchive python module for programatic access to archive.org." msgstr "" -#: gnu/packages/web.scm:5327 +#: gnu/packages/web.scm:5522 msgid "Search code snippets on @url{https://commandlinefu.com}" msgstr "" -#: gnu/packages/web.scm:5328 +#: gnu/packages/web.scm:5523 msgid "" "@code{clf} is a command line tool for searching code\n" "snippets on @url{https://commandlinefu.com}." msgstr "" -#: gnu/packages/web.scm:5430 +#: gnu/packages/web.scm:5627 msgid "Easy interactive web applications with R" msgstr "" -#: gnu/packages/web.scm:5432 +#: gnu/packages/web.scm:5629 msgid "" "Makes it incredibly easy to build interactive web applications\n" "with R. Automatic \"reactive\" binding between inputs and outputs and\n" @@ -20144,32 +21571,45 @@ msgid "" "responsive, and powerful applications with minimal effort." msgstr "" -#: gnu/packages/web.scm:5471 +#: gnu/packages/web.scm:5669 msgid "Create dashboards with shiny" msgstr "" -#: gnu/packages/web.scm:5472 +#: gnu/packages/web.scm:5670 msgid "" "This package provides an extension to the Shiny web\n" "application framework for R, making it easy to create attractive dashboards." msgstr "" -#: gnu/packages/web.scm:5499 +#: gnu/packages/web.scm:5697 +msgid "Server-side file system viewer for Shiny" +msgstr "" + +#: gnu/packages/web.scm:5699 +msgid "" +"This package provides functionality for client-side navigation of the\n" +"server side file system in shiny apps. In case the app is running locally\n" +"this gives the user direct access to the file system without the need to\n" +"\"download\" files to a temporary location. Both file and folder selection as\n" +"well as file saving is available." +msgstr "" + +#: gnu/packages/web.scm:5726 msgid "Inter-widget interactivity for HTML widgets" msgstr "" -#: gnu/packages/web.scm:5501 +#: gnu/packages/web.scm:5728 msgid "" "This package provides building blocks for allowing HTML widgets to\n" "communicate with each other, with Shiny or without (i.e. static @code{.html}\n" "files). It currently supports linked brushing and filtering." msgstr "" -#: gnu/packages/web.scm:5521 +#: gnu/packages/web.scm:5748 msgid "Web server interface for R" msgstr "Internetservergrænseflade for R" -#: gnu/packages/web.scm:5523 +#: gnu/packages/web.scm:5750 msgid "" "This package contains the Rook specification and convenience software\n" "for building and running Rook applications. A Rook application is an R\n" @@ -20178,22 +21618,22 @@ msgid "" "named elements: the @code{status}, the @code{headers}, and the @code{body}." msgstr "" -#: gnu/packages/web.scm:5563 +#: gnu/packages/web.scm:5789 msgid "Generate Atom feeds for social networking websites" msgstr "" -#: gnu/packages/web.scm:5564 +#: gnu/packages/web.scm:5790 msgid "" "rss-bridge generates Atom feeds for social networking\n" "websites lacking feeds. Supported websites include Facebook, Twitter,\n" "Instagram and YouTube." msgstr "" -#: gnu/packages/web.scm:5596 +#: gnu/packages/web.scm:5817 msgid "Check websites for broken links" msgstr "Kontroller hjemmesider for afbrudte henvisninger" -#: gnu/packages/web.scm:5597 +#: gnu/packages/web.scm:5818 msgid "" "LinkChecker is a website validator. It checks for broken\n" "links in websites. It is recursive and multithreaded providing output in\n" @@ -20202,99 +21642,99 @@ msgid "" "file links." msgstr "" -#: gnu/packages/web.scm:5638 +#: gnu/packages/web.scm:5854 msgid "Command-line WebDAV client" msgstr "WebDAV-klient for kommandolinjen" -#: gnu/packages/web.scm:5640 +#: gnu/packages/web.scm:5856 msgid "" "Cadaver is a command-line WebDAV client for Unix. It supports\n" "file upload, download, on-screen display, namespace operations (move/copy),\n" "collection creation and deletion, and locking operations." msgstr "" -#: gnu/packages/web.scm:5658 +#: gnu/packages/web.scm:5874 msgid "Universal Binary JSON encoder/decoder" msgstr "" -#: gnu/packages/web.scm:5660 +#: gnu/packages/web.scm:5876 msgid "" "Py-ubjson is a Python module providing an Universal Binary JSON\n" "encoder/decoder based on the draft-12 specification for UBJSON." msgstr "" -#: gnu/packages/web.scm:5708 +#: gnu/packages/web.scm:5938 msgid "" "Java Servlet, JavaServer Pages, Java Expression Language and Java\n" "WebSocket" msgstr "" -#: gnu/packages/web.scm:5710 +#: gnu/packages/web.scm:5940 msgid "" "Apache Tomcat is a free implementation of the Java\n" "Servlet, JavaServer Pages, Java Expression Language and Java WebSocket\n" "technologies." msgstr "" -#: gnu/packages/web.scm:5760 +#: gnu/packages/web.scm:5990 msgid "Helper classes for jetty tests" msgstr "" -#: gnu/packages/web.scm:5761 +#: gnu/packages/web.scm:5991 msgid "" "This packages contains helper classes for testing the Jetty\n" "Web Server." msgstr "" -#: gnu/packages/web.scm:5823 +#: gnu/packages/web.scm:6053 msgid "Utility classes for Jetty" msgstr "Redskabsklasser for Jetty" -#: gnu/packages/web.scm:5824 +#: gnu/packages/web.scm:6054 msgid "" "The Jetty Web Server provides an HTTP server and Servlet\n" "container capable of serving static and dynamic content either from a standalone\n" "or embedded instantiation. This package provides utility classes." msgstr "" -#: gnu/packages/web.scm:5895 +#: gnu/packages/web.scm:6125 msgid "Jetty :: IO Utility" msgstr "Jetty :: IO-redskab" -#: gnu/packages/web.scm:5896 +#: gnu/packages/web.scm:6126 msgid "" "The Jetty Web Server provides an HTTP server and Servlet\n" "container capable of serving static and dynamic content either from a standalone\n" "or embedded instantiation. This package provides IO-related utility classes." msgstr "" -#: gnu/packages/web.scm:5939 +#: gnu/packages/web.scm:6169 msgid "Jetty :: Http Utility" msgstr "" -#: gnu/packages/web.scm:5940 +#: gnu/packages/web.scm:6170 msgid "" "The Jetty Web Server provides an HTTP server and Servlet\n" "container capable of serving static and dynamic content either from a standalone\n" "or embedded instantiation. This package provides HTTP-related utility classes." msgstr "" -#: gnu/packages/web.scm:5973 +#: gnu/packages/web.scm:6203 msgid "Jetty :: JMX Management" msgstr "" -#: gnu/packages/web.scm:5974 +#: gnu/packages/web.scm:6204 msgid "" "The Jetty Web Server provides an HTTP server and Servlet\n" "container capable of serving static and dynamic content either from a standalone\n" "or embedded instantiation. This package provides the JMX management." msgstr "" -#: gnu/packages/web.scm:6060 +#: gnu/packages/web.scm:6290 msgid "Core jetty server artifact" msgstr "" -#: gnu/packages/web.scm:6061 +#: gnu/packages/web.scm:6291 msgid "" "The Jetty Web Server provides an HTTP server and Servlet\n" "container capable of serving static and dynamic content either from a standalone\n" @@ -20302,11 +21742,11 @@ msgid "" "artifact." msgstr "" -#: gnu/packages/web.scm:6104 +#: gnu/packages/web.scm:6335 msgid "Jetty security infrastructure" msgstr "" -#: gnu/packages/web.scm:6105 +#: gnu/packages/web.scm:6336 msgid "" "The Jetty Web Server provides an HTTP server and Servlet\n" "container capable of serving static and dynamic content either from a standalone\n" @@ -20314,11 +21754,11 @@ msgid "" "infrastructure" msgstr "" -#: gnu/packages/web.scm:6148 +#: gnu/packages/web.scm:6379 msgid "Jetty Servlet Container" msgstr "" -#: gnu/packages/web.scm:6149 +#: gnu/packages/web.scm:6380 msgid "" "The Jetty Web Server provides an HTTP server and Servlet\n" "container capable of serving static and dynamic content either from a standalone\n" @@ -20326,22 +21766,22 @@ msgid "" "container." msgstr "" -#: gnu/packages/web.scm:6212 +#: gnu/packages/web.scm:6544 msgid "HTML parser" msgstr "HTML-fortolker" -#: gnu/packages/web.scm:6213 +#: gnu/packages/web.scm:6545 msgid "" "Jsoup is a Java library for working with real-world HTML. It\n" "provides a very convenient API for extracting and manipulating data, using the\n" "best of DOM, CSS, and jQuery-like methods." msgstr "" -#: gnu/packages/web.scm:6234 +#: gnu/packages/web.scm:6566 msgid "Validate HTML" msgstr "" -#: gnu/packages/web.scm:6235 +#: gnu/packages/web.scm:6567 msgid "" "Tidyp is a program that can validate your HTML, as well as\n" "modify it to be more clean and standard. tidyp does not validate HTML 5.\n" @@ -20351,22 +21791,22 @@ msgid "" "based on this library, allowing Perl programmers to easily validate HTML." msgstr "" -#: gnu/packages/web.scm:6276 +#: gnu/packages/web.scm:6608 msgid "(X)HTML validation in a Perl object" msgstr "" -#: gnu/packages/web.scm:6277 +#: gnu/packages/web.scm:6609 msgid "" "@code{HTML::Tidy} is an HTML checker in a handy dandy\n" "object. It's meant as a replacement for @code{HTML::Lint}, which is written\n" "in Perl but is not nearly as capable as @code{HTML::Tidy}." msgstr "" -#: gnu/packages/web.scm:6303 +#: gnu/packages/web.scm:6635 msgid "Small Gopher server" msgstr "" -#: gnu/packages/web.scm:6305 +#: gnu/packages/web.scm:6637 msgid "" "Geomyidae is a server for distributed hypertext protocol Gopher. Its\n" "features include:\n" @@ -20380,22 +21820,22 @@ msgid "" "@end enumerate\n" msgstr "" -#: gnu/packages/web.scm:6352 +#: gnu/packages/web.scm:6685 msgid "Random avatar generator" msgstr "" -#: gnu/packages/web.scm:6353 +#: gnu/packages/web.scm:6686 msgid "" "Cat avatar generator is a generator of cat pictures optimised\n" "to generate random avatars, or defined avatar from a \"seed\". This is a\n" "derivation by David Revoy from the original MonsterID by Andreas Gohr." msgstr "" -#: gnu/packages/web.scm:6415 +#: gnu/packages/web.scm:6748 msgid "HTTP/2 protocol client, proxy, server, and library" msgstr "" -#: gnu/packages/web.scm:6417 +#: gnu/packages/web.scm:6750 msgid "" "nghttp2 implements the Hypertext Transfer Protocol, version\n" "2 (@dfn{HTTP/2}).\n" @@ -20421,6 +21861,27 @@ msgid "" "@end itemize\n" msgstr "" +#: gnu/packages/web.scm:6850 +msgid "Web interface for cluster deployments of Guix" +msgstr "" + +#: gnu/packages/web.scm:6851 +msgid "" +"Hpcguix-web provides a web interface to the list of packages\n" +"provided by Guix. The list of packages is searchable and provides\n" +"instructions on how to use Guix in a shared HPC environment." +msgstr "" + +#: gnu/packages/web.scm:6873 +msgid "Shiny UI widgets for small screens" +msgstr "" + +#: gnu/packages/web.scm:6875 +msgid "" +"This package provides UI widget and layout functions for writing Shiny apps that\n" +"work well on small screens." +msgstr "" + #: gnu/packages/wordnet.scm:92 msgid "Lexical database for the English language" msgstr "Leksikal database for det engelske sprog" @@ -20437,11 +21898,11 @@ msgid "" "language processing." msgstr "" -#: gnu/packages/xiph.scm:69 +#: gnu/packages/xiph.scm:70 msgid "Library for manipulating the ogg multimedia format" msgstr "" -#: gnu/packages/xiph.scm:71 +#: gnu/packages/xiph.scm:72 msgid "" "The libogg library allows to manipulate the ogg multimedia container\n" "format, which encapsulates raw compressed data and allows the interleaving of\n" @@ -20450,11 +21911,11 @@ msgid "" "periodic timestamps for seeking." msgstr "" -#: gnu/packages/xiph.scm:98 +#: gnu/packages/xiph.scm:96 msgid "Library implementing the vorbis audio format" msgstr "" -#: gnu/packages/xiph.scm:100 +#: gnu/packages/xiph.scm:98 msgid "" "The libvorbis library implements the ogg vorbis audio format,\n" "a fully open, non-proprietary, patent-and-royalty-free, general-purpose\n" @@ -20463,22 +21924,22 @@ msgid "" "128 kbps/channel." msgstr "" -#: gnu/packages/xiph.scm:137 +#: gnu/packages/xiph.scm:123 msgid "Library implementing the Theora video format" msgstr "Bibliotek der implementerer videoformatet Theora" -#: gnu/packages/xiph.scm:139 +#: gnu/packages/xiph.scm:125 msgid "" "The libtheora library implements the ogg theora video format,\n" "a fully open, non-proprietary, patent-and-royalty-free, general-purpose\n" "compressed video format." msgstr "" -#: gnu/packages/xiph.scm:164 +#: gnu/packages/xiph.scm:150 msgid "Library for patent-free audio compression format" msgstr "Bibliotek for det patentfrie lydkomprimeringsformat" -#: gnu/packages/xiph.scm:166 +#: gnu/packages/xiph.scm:152 msgid "" "GNU Speex is a patent-free audio compression codec specially designed\n" "for speech. It is well-adapted to internet applications, such as VoIP. It\n" @@ -20486,21 +21947,21 @@ msgid "" "stereo encoding, and voice activity detection." msgstr "" -#: gnu/packages/xiph.scm:192 +#: gnu/packages/xiph.scm:178 msgid "Speex processing library" msgstr "Speex-behandlingsbibliotek" -#: gnu/packages/xiph.scm:194 +#: gnu/packages/xiph.scm:180 msgid "" "SpeexDSP is a @dfn{DSP} (Digital Signal Processing) library based on\n" "work from the @code{speex} codec." msgstr "" -#: gnu/packages/xiph.scm:221 +#: gnu/packages/xiph.scm:207 msgid "Cross platform audio library" msgstr "" -#: gnu/packages/xiph.scm:223 +#: gnu/packages/xiph.scm:209 msgid "" "Libao is a cross-platform audio library that allows programs to\n" "output audio using a simple API on a wide variety of platforms.\n" @@ -20526,21 +21987,21 @@ msgid "" "@end enumerate\n" msgstr "" -#: gnu/packages/xiph.scm:265 +#: gnu/packages/xiph.scm:251 msgid "Free lossless audio codec" msgstr "Fri lydkodning uden kvalitetstab" -#: gnu/packages/xiph.scm:267 +#: gnu/packages/xiph.scm:253 msgid "" "FLAC stands for Free Lossless Audio Codec, an audio format that is lossless,\n" "meaning that audio is compressed in FLAC without any loss in quality." msgstr "" -#: gnu/packages/xiph.scm:293 +#: gnu/packages/xiph.scm:279 msgid "Karaoke and text codec for embedding in ogg" msgstr "" -#: gnu/packages/xiph.scm:295 +#: gnu/packages/xiph.scm:281 msgid "" "Kate is an overlay codec, originally designed for karaoke and text,\n" "that can be multiplixed in Ogg. Text and images can be carried by a Kate\n" @@ -20555,11 +22016,11 @@ msgid "" "Kate stream." msgstr "" -#: gnu/packages/xiph.scm:333 +#: gnu/packages/xiph.scm:319 msgid "Ogg vorbis tools" msgstr "Ogg vorbis-værktøjer" -#: gnu/packages/xiph.scm:335 +#: gnu/packages/xiph.scm:321 msgid "" "Ogg vorbis is a non-proprietary, patent-and-royalty-free,\n" "general-purpose compressed audio format.\n" @@ -20572,11 +22033,11 @@ msgid "" " an ogg vorbis file." msgstr "" -#: gnu/packages/xiph.scm:359 gnu/packages/xiph.scm:422 +#: gnu/packages/xiph.scm:345 gnu/packages/xiph.scm:411 msgid "Versatile audio codec" msgstr "Alsidig lydkodning" -#: gnu/packages/xiph.scm:361 +#: gnu/packages/xiph.scm:347 msgid "" "Opus is a totally open, royalty-free, highly versatile audio codec. Opus\n" "is unmatched for interactive speech and music transmission over the Internet,\n" @@ -20585,29 +22046,39 @@ msgid "" "incorporated technology from Skype's SILK codec and Xiph.Org's CELT codec." msgstr "" -#: gnu/packages/xiph.scm:395 +#: gnu/packages/xiph.scm:384 msgid "Command line utilities to encode, inspect, and decode .opus files" msgstr "" -#: gnu/packages/xiph.scm:396 +#: gnu/packages/xiph.scm:385 msgid "" "Opus is a royalty-free, highly versatile audio codec.\n" "Opus-tools provide command line utilities for creating, inspecting and\n" "decoding .opus files." msgstr "" -#: gnu/packages/xiph.scm:424 +#: gnu/packages/xiph.scm:413 msgid "" "The opusfile library provides seeking, decode, and playback of Opus\n" "streams in the Ogg container (.opus files) including over http(s) on posix and\n" "windows systems." msgstr "" -#: gnu/packages/xiph.scm:454 +#: gnu/packages/xiph.scm:435 +msgid "Library for encoding Opus audio files and streams " +msgstr "Bibliotek til at kode Opus-lydfiler og -strømme" + +#: gnu/packages/xiph.scm:436 +msgid "" +"The libopusenc libraries provide a high-level API for\n" +"encoding Opus files and streams." +msgstr "" + +#: gnu/packages/xiph.scm:465 msgid "Streaming media server" msgstr "Strøm-medieserver" -#: gnu/packages/xiph.scm:455 +#: gnu/packages/xiph.scm:466 msgid "" "Icecast is a streaming media server which currently supports\n" "Ogg (Vorbis and Theora), Opus, WebM and MP3 audio streams. It can be used to\n" @@ -20615,18 +22086,18 @@ msgid "" "things in between." msgstr "" -#: gnu/packages/xiph.scm:483 +#: gnu/packages/xiph.scm:494 msgid "Audio streaming library for icecast encoders" msgstr "" -#: gnu/packages/xiph.scm:485 +#: gnu/packages/xiph.scm:496 msgid "" "Libshout is a library for communicating with and sending data to an\n" "icecast server. It handles the socket connection, the timing of the data,\n" "and prevents bad data from getting to the icecast server." msgstr "" -#: gnu/services/base.scm:282 +#: gnu/services/base.scm:294 msgid "" "The @code{user-processes} service is responsible for\n" "terminating all the processes so that the root file system can be re-mounted\n" @@ -20635,26 +22106,26 @@ msgid "" "@code{SIGKILL}." msgstr "" -#: gnu/services/base.scm:335 +#: gnu/services/base.scm:346 msgid "" "Populate the @file{/etc/fstab} based on the given file\n" "system objects." msgstr "" -#: gnu/services/base.scm:512 +#: gnu/services/base.scm:523 msgid "" "Provide Shepherd services to mount and unmount the given\n" "file systems, as well as corresponding @file{/etc/fstab} entries." msgstr "" -#: gnu/services/base.scm:602 +#: gnu/services/base.scm:613 msgid "" "Seed the @file{/dev/urandom} pseudo-random number\n" "generator (RNG) with the value recorded when the system was last shut\n" "down." msgstr "" -#: gnu/services/base.scm:763 +#: gnu/services/base.scm:777 msgid "" "Install the given fonts on the specified ttys (fonts are per\n" "virtual console on GNU/Linux). The value of this service is a list of\n" @@ -20665,56 +22136,56 @@ msgid "" "@end example\n" msgstr "" -#: gnu/services/base.scm:806 +#: gnu/services/base.scm:820 msgid "" "Provide a console log-in service as specified by its\n" "configuration value, a @code{login-configuration} object." msgstr "" -#: gnu/services/base.scm:1069 +#: gnu/services/base.scm:1083 msgid "" "Provide console login using the @command{agetty}\n" "program." msgstr "" -#: gnu/services/base.scm:1123 +#: gnu/services/base.scm:1144 msgid "" "Provide console login using the @command{mingetty}\n" "program." msgstr "" -#: gnu/services/base.scm:1295 +#: gnu/services/base.scm:1360 msgid "" "Runs libc's @dfn{name service cache daemon} (nscd) with the\n" "given configuration---an @code{} object. @xref{Name\n" "Service Switch}, for an example." msgstr "" -#: gnu/services/base.scm:1395 +#: gnu/services/base.scm:1460 msgid "" "Install the specified resource usage limits by populating\n" "@file{/etc/security/limits.conf} and using the @code{pam_limits}\n" "authentication module." msgstr "" -#: gnu/services/base.scm:1613 +#: gnu/services/base.scm:1679 msgid "Run the build daemon of GNU@tie{}Guix, aka. @command{guix-daemon}." msgstr "" -#: gnu/services/base.scm:1713 +#: gnu/services/base.scm:1779 msgid "" "Add a Shepherd service running @command{guix publish}, a\n" "command that allows you to share pre-built binaries with others over HTTP." msgstr "" -#: gnu/services/base.scm:1918 +#: gnu/services/base.scm:1978 msgid "" "Run @command{udev}, which populates the @file{/dev}\n" "directory dynamically. Get extra rules from the packages listed in the\n" "@code{rules} field of its value, @code{udev-configuration} object." msgstr "" -#: gnu/services/base.scm:1993 +#: gnu/services/base.scm:2060 msgid "" "Run GPM, the general-purpose mouse daemon, with the given\n" "command-line options. GPM allows users to use the mouse in the console,\n" @@ -20722,6 +22193,14 @@ msgid "" "@code{ps2} protocol, which works for both USB and PS/2 mice." msgstr "" +#: gnu/services/base.scm:2243 +msgid "" +"Turn up the specified network interfaces upon startup,\n" +"with the given IP address, gateway, netmask, and so on. The value for\n" +"services of this type is a list of @code{static-networking} objects, one per\n" +"network interface." +msgstr "" + #: gnu/services/certbot.scm:168 msgid "" "Automatically renew @url{https://letsencrypt.org, Let's\n" @@ -20729,94 +22208,90 @@ msgid "" "and periodically invoking @command{certbot}." msgstr "" -#: gnu/services/networking.scm:270 -msgid "" -"Turn up the specified network interfaces upon startup,\n" -"with the given IP address, gateway, netmask, and so on. The value for\n" -"services of this type is a list of @code{static-networking} objects, one per\n" -"network interface." -msgstr "" - -#: gnu/services/networking.scm:513 +#: gnu/services/networking.scm:372 msgid "" "Run the @command{ntpd}, the Network Time Protocol (NTP)\n" "daemon of the @uref{http://www.ntp.org, Network Time Foundation}. The daemon\n" "will keep the system clock synchronized with that of the given servers." msgstr "" -#: gnu/services/networking.scm:623 +#: gnu/services/networking.scm:485 msgid "" "Run the @command{ntpd}, the Network Time Protocol (NTP)\n" "daemon, as implemented by @uref{http://www.openntpd.org, OpenNTPD}. The\n" "daemon will keep the system clock synchronized with that of the given servers." msgstr "" -#: gnu/services/networking.scm:711 +#: gnu/services/networking.scm:573 msgid "" "Start @command{inetd}, the @dfn{Internet superserver}. It is responsible\n" "for listening on Internet sockets and spawning the corresponding services on\n" "demand." msgstr "" -#: gnu/services/networking.scm:866 +#: gnu/services/networking.scm:752 msgid "" "Run the @uref{https://torproject.org, Tor} anonymous\n" "networking daemon." msgstr "" -#: gnu/services/networking.scm:889 +#: gnu/services/networking.scm:775 msgid "Define a new Tor @dfn{hidden service}." -msgstr "" +msgstr "Definer en ny Tor @dfn{hidden service}." -#: gnu/services/networking.scm:957 +#: gnu/services/networking.scm:843 msgid "" "Run @url{https://launchpad.net/wicd,Wicd}, a network\n" "management daemon that aims to simplify wired and wireless networking." msgstr "" -#: gnu/services/networking.scm:1046 +#: gnu/services/networking.scm:943 msgid "" "Run @uref{https://wiki.gnome.org/Projects/NetworkManager,\n" "NetworkManager}, a network management daemon that aims to simplify wired and\n" "wireless networking." msgstr "" -#: gnu/services/networking.scm:1104 +#: gnu/services/networking.scm:1004 msgid "" "Run @url{https://01.org/connman,Connman},\n" "a network connection manager." msgstr "" -#: gnu/services/networking.scm:1193 +#: gnu/services/networking.scm:1027 +msgid "" +"Run @uref{https://wiki.gnome.org/Projects/ModemManager,\n" +"ModemManager}, a modem management daemon that aims to simplify dialup\n" +"networking." +msgstr "" + +#: gnu/services/networking.scm:1089 +msgid "" +"Run the WPA Supplicant daemon, a service that\n" +"implements authentication, key negotiation and more for wireless networks." +msgstr "" + +#: gnu/services/networking.scm:1151 msgid "" "Run @uref{http://www.openvswitch.org, Open vSwitch}, a multilayer virtual\n" "switch designed to enable massive network automation through programmatic\n" "extension." msgstr "" -#: gnu/services/version-control.scm:142 +#: gnu/services/networking.scm:1196 +msgid "Run @command{iptables-restore}, setting up the specified rules." +msgstr "Kør @command{iptables-restore}, opsætning af de angivne regler." + +#: gnu/services/version-control.scm:160 msgid "" "Expose Git respositories over the insecure @code{git://} TCP-based\n" "protocol." msgstr "" -#~ msgid "X86 emulator with CGA/EGA/VGA/etc. graphics and sound" -#~ msgstr "X86-emulator med CGA/EGA/VGA/etc. grafik og lyd" - -#~ msgid "Nintendo 64 emulator core library" -#~ msgstr "Nintendo 64-emulator - grundlæggende bibliotek" - -#~ msgid "Nintendo DS emulator" -#~ msgstr "Nintendo DS-emulator" - -#~ msgid "DeSmuME is an emulator for the Nintendo DS handheld gaming console." -#~ msgstr "DeSmuME er en emulator for den håndholdte spilkonsol Nintendo DS." - -#~ msgid "Nintendo multi-system emulator" -#~ msgstr "Nintendo multi-system-emulator" - -#~ msgid "Library for reading images in the Microsoft WMF format" -#~ msgstr "Bibliotek for læsning af billeder i Microsoft WMF-formatet" - -#~ msgid "Tune hard disk parameters for high performance" -#~ msgstr "Finjuster harddiskparametre for høj ydelse" +#: gnu/services/version-control.scm:374 +msgid "" +"Setup @command{gitolite}, a Git hosting tool providing access over SSH..\n" +"By default, the @code{git} user is used, but this is configurable.\n" +"Additionally, Gitolite can integrate with with tools like gitweb or cgit to\n" +"provide a web interface to view selected repositories." +msgstr ""