The newly introduced --enable-compressed-debug-section=all configure
flag in the base binutils package makes the mingw-w64 build system
unusable. For example:
$ guix build --target=x86_64-w64-mingw32 hello
and
$ guix build mingw-w64-x86_64-winpthreads
Will fail to build with an error:
"x86_64-w64-mingw32-ld: final link failed: bad value"
Turning off this flag seems to fix the problem, but perhaps it'd also be
worthwhile to investigate the root cause.
* gnu/packages/cross-base.scm (cross-binutils): When building for mingw
targets, append "--enable-compressed-debug-section=no" to configure
flags.
It behaves similarily to the other target-...? procedures.
The usage of hurd-triplet? / target-hurd? in libgc appears
incorrect to me, as (%current-system) is normally never false.
* gnu/packages/hurd.scm (hurd-triplet?): Move to ...
* guix/util.scm (target-hurd?): ... here, let its argument
default to (%current-target-system) or (%current-system),
and write a docstring.
* gnu/packages/hurd.scm
(hurd-target?, hurd-system?): Use target-hurd? instead of
hurd-triplet?.
* gnu/packages/bdw-gc.scm (libgc): Likewise.
* gnu/packages/cross-base.scm
(cross-libc)[arguments]<#:configure-flags>: Likewise.
(cross-libc)[arguments]<#:phases>: Likewise.
(cross-libc)[arguments]<#:native-inputs>: Likewise.
* gnu/packages/make-boostrap.scm
(%glibc-stripped)[inputs]: Likewise.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Fixes <https://bugs.gnu.org/48825>.
In short, this change adds the hard-coded "--with-long-double-128" configure
option in one place and removes it from two other places. This changes and
simplifies the use of this option for various architectures that start with
the string "powerpc".
* gnu/packages/gcc.scm (gcc-configure-flags-for-triplet): Add a clause for
targets starting with "powerpc64le-" or "powerpc-" which adds the
"--with-long-double-128" option. This causes any package using this procedure
to be built using this new option on these architectures. In particular, this
affects the gcc package and the gcc-final package, in addition to all the
other versions of GCC defined in (gnu packages gcc).
* gnu/packages/commencement.scm (gcc-boot0)[#:configure-flags]: Remove the
code that adds the "--with-long-double-128" configure option for all
architectures starting with "powerpc", since it is now redundant on the
architectures where it is needed. The gcc-boot0 package uses (and adds to) the
gcc package's configure options. This means that the above change in gcc.scm
is sufficient to ensure that the gcc-boot0 package's configure options will
include "--with-long-double-128" on powerpc64le and powerpc architectures.
Additionally, since the option is apparently not required on the big-endian
powerpc64 architecture, this change also has the nice effect of omitting the
option in that case.
* gnu/packages/cross-base.scm (cross-gcc-arguments)[#:configure-flags]: Remove
the code that adds the "--with-long-double-128" configure option for
powerpc64le, since it is now redundant. The cross-gcc-arguments procedure uses
(and adds to) the configure options of its xgcc argument (a package). This
means that regardless of which gcc from gcc.scm is used as the xgcc, the above
change in gcc.scm is sufficient to ensure that the cross-gcc-arguments
procedure's configure options will include "--with-long-double-128" on the
powerpc64le and powerpc architectures.
* gnu/packages/patches/gcc-cross-gxx-include-dir.patch: New file.
* gnu/packages/patches/gcc-10-cross-environment-variables.patch: New file.
* gnu/packages/gcc.scm (gcc): Point to GCC-10.
(gcc-objc): Point to GCC-OBJC-10.
(gcc-objc++): Point to GCC-OBJC++-10.
* gnu/packages/cross-base.scm (cross-gcc)[source](patches): Apply the new
patches.
This fixes a regression introduced in
0e2251fcf8, as "make headers_check" does not
actually build the headers in newer versions, instead "make headers_install"
built them as a side effect.
* gnu/packages/cross-base.scm (cross-kernel-headers)[arguments]: Adjust build
phase to call the correct Make target. While at it, migrate to MODIFY-PHASES.
* gnu/packages/cross-base.scm (cross-gcc-arguments): When conditionally adding
"--with-long-double-128", check for "powerpc64le-" prefix instead of matching
full target.
Signed-off-by: Chris Marusich <cmmarusich@gmail.com>
* gnu/packages/hurd.scm (mig)[inputs]: Include perl.
[arguments]: Substitute "perl" with full store file name in bin/mig.
* gnu/packages/cross-base.scm (cross-kernel-headers): Adjust mig-cross
accordingly.
* gnu/packages/patches/glibc-hurd-gettyent.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add it.
* gnu/packages/cross-base.scm (cross-libc): Add it in 'patch-libc/hurd' phase
when 'hurd-target?' is true.
* gnu/packages/patches/glibc-hurd-mach-print.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add it.
* gnu/packages/cross-base.scm (cross-libc): Add 'patch-libc/hurd' phase
when 'hurd-target?' is true.
This is a followup to c1c50cb5b0.
* gnu/packages/cross-base.scm (package-with-patch): Rename to...
(package-with-patches): ... this, and take a list of patches.
(package-with-extra-patches): Use it.
(cross-binutils): Use 'search-patches' instead of 'search-patch'.
This also removes the execute bit from the patches added. Not sure how
or why those were set in the first place.
* gnu/packages/cross-base.scm (package-with-extra-patches): Imitate
PACKAGE-WITH-PATCH instead of using it.
* gnu/packages/patches/binutils-mingw-w64-reproducible-import-libraries.patch:
Remove execute bit.
* gnu/packages/patches/binutils-mingw-w64-specify-timestamp.patch:
Remove execute bit.
These patches were originally found at the debian mingw-w64 team's
binutils repo, and should improve the reproducibility of our mingw-w64
toolchain.
* gnu/packages/patches/binutils-mingw-w64-reproducible-import-libraries.patch:
New file.
* gnu/packages/patches/binutils-mingw-w64-specify-timestamp.patch:
New file.
* gnu/local.mk (dist_patch_DATA): Update accordingly.
* gnu/packages/cross-base.scm (cross-binutils): Apply relevant patches
if target is mingw-w64.
(package-with-extra-patches): New procedure.
This fixes cross building of coreutils, e.g.
./pre-inst-env guix build --target=i586-pc-gnu coreutils
* gnu/packages/cross-base.scm (cross-libc): Add -lhurduser, -lmachuser for the
Hurd.
This fixes cross building of coreutils, e.g.
./pre-inst-env guix build --target=i586-pc-gnu coreutils
* gnu/packages/cross-base.scm (cross-libc): Add -lhurduser, -lmachuser for the
Hurd.
Add a "lib" output to cross-gcc. This requires an upstream GCC patch adding
support for --with-toolexeclibdir configure option. This option allows to
install cross-built GCC libraries in a specific location.
This also fixes the computation of TOOLDIR_BASE_PREFIX, that fails when
/gnu/store/... directories are involved.
* gnu/packages/patches/gcc-7-cross-toolexeclibdir.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add it.
* gnu/packages/cross-base.scm (cross-gcc)[source]: Apply it,
[outputs]: add a "lib" output,
(cross-gcc-snippet): fix TOOLDIR_BASE_PREFIX.
This is a followup to 2073b55e6b.
* gnu/build/cross-toolchain.scm (%gcc-include-paths): Switch back to
'C_INCLUDE_PATH' & co.
* gnu/packages/cross-base.scm (%gcc-include-paths): Likewise.
(cross-gcc-arguments): Remove 'treat-glibc-as-system-header' phase.
(cross-gcc)[native-inputs]: Reorder so that libc comes last.
[search-paths]: Add "include/c++" for 'CROSS_CPLUS_INCLUDE_PATH'.
* guix/build-system/gnu.scm (standard-cross-packages): Have "cross-gcc"
appear both for 'host and 'target.
This recursive package definition really demonstrates how magical Guix
can be :-)
Try invoking:
./pre-inst-env guix build mingw-w64-{x86_64,i686}{,-winpthreads}
* gnu/packages/mingw.scm (make-mingw-w64): Add XGCC, XBINUTILS optional
arguments to specify using a non-default cross-compiler/binutils. Add
WITH-WINPTHREADS? optional argument to allow building with winpthreads
support. Adjust accordingly for the new arguments.
(mingw-w64-i686-winpthreads, mingw-w64-x86_64-winpthreads): Add
variables.
* gnu/packages/cross-base.scm (native-libc): Add XGCC, XBINUTILS
key arugments and pass to MAKE-MINGW-W64.
(cross-libc): Pass XGCC and XBINUTILS to NATIVE-LIBC.
This resurrects
./pre-inst-env guix build --target=i686-unknown-linux-gnu hello
* gnu/packages/cross-base.scm (cross-gcc-arguments): Do not build libmpx;
does not cross-configure.
* gnu/packages/patches/gcc-7-cross-mingw.patch: New file.
* gnu/packages/cross-base.scm (cross-gcc-patches): Add XGCC parameter; update
caller. Use it for target mingw and gcc >= 7.
* gnu/local.mk (dist_patch_DATA): Add it.
This patch parameterizes previously hard-coded instances of
i686-w64-mingw32, adding support for x86_64-w64-mingw32.
* gnu/packages/mingw.scm (make-mingw-w64): New procedure.
(mingw-w64-i686, mingw-w64-x86_64): New variables.
(%mingw-triplet): Remove.
(mingw-w64): Update to point to 'mingw-w64-i686'.
* gnu/packages/cross-base.scm (cross-gcc): Use 'libc' keyword argument
if specified, instead of treating it as a boolean.
(native-libc): Return the correct mingw-w64 depending on machine
specified in target.
* gnu/packages/bootstrap.scm (glibc-dynamic-linker): Add "x86_64-mingw".
* gnu/build/cross-toolchain.scm (set-cross-path/mingw): Replace
hardcoded 'i686-w64-mingw32' instances with 'target' keyword argument.
(cross-gcc-build-phases): Update accordingly; use 'target-mingw?'
implementation of target checking and add commentary.
* gnu/ci.scm (%cross-targets): Add "x86_64-w64-mingw32".
This makes sure it is inherited by packages using (cross-gcc ...). This
commit is a followup to 01e8263feb.
* gnu/build/cross-toolchain.scm (cross-gcc-build-phases): Move
'treat-glibc-as-system-header' phase ...
* gnu/packages/cross-base.scm (cross-gcc-arguments): ... here.
* gnu/packages/cross-base.scm (%gcc-cross-include-paths): Remove
CROSS_C_INCLUDE_PATH & co in favor of CROSS_CPATH.
* gnu/build/cross-toolchain.scm (%gcc-cross-include-paths): Likewise.
(cross-gcc-build-phases): Set CROSS_C_INCLUDE_PATH and
CROSS_CPLUS_INCLUDE_PATH when building the cross GCC.
* gnu/packages/commencement.scm (libstdc++): Add
"--disable-libstdcxx-dual-abi" to #:configure-flags.
(gcc-boot0)[arguments]: Add "--disable-libmpx"
to #:configure-flags.
(gcc-final): Add phase to set C_INCLUDE_PATH and CPLUS_INCLUDE_PATH before
building GCC.
(gcc-toolchain-5): Use MAKE-GCC-TOOLCHAIN.
(gcc-toolchain-7): Change to GCC-TOOLCHAIN.
* gnu/packages/gcc.scm (gcc): Change from GCC-5 to GCC-7.
(gfortran): Change to GFORTRAN-7.
(gcc-objc): Change to GCC-OBJC-7.
(gcc-objc++): Change to GCC-OBJC++-7.
* gnu/packages/rust.scm (rust-1.19.0)[native-search-paths]: Change from
C_INCLUDE_PATH & co to CPATH.
This patch is missing from glibc 2.28 and is needed to support
/proc/self lookup when using the Hurd's procfs, which in turn is needed
for our 'guile-relocatable.patch'.
See <https://lists.gnu.org/archive/html/bug-hurd/2018-12/msg00024.html>.
* gnu/packages/patches/glibc-hurd-magic-pid.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add it.
* gnu/packages/base.scm (glibc)[arguments]: Add 'apply-hurd-patch'
phase.
[native-inputs]: Add "hurd-magic-pid-patch" input.
* gnu/packages/cross-base.scm (cross-libc)[arguments]: Duplicate
'apply-hurd-patch' phase.
Version 2.28 of glibc is the first in a long time that fully supports
GNU/Hurd. This change updates the Hurd and Mach to provide the features
glibc 2.28 expects and adjusts the cross-compilation tool chain for
"i586-pc-gnu".
* gnu/packages/base.scm (glibc/linux): Rename to...
(glibc): ... this.
[propagated-inputs]: Add 'hurd-target?' case.
[arguments]: Use '--disable-werror' when 'hurd-target?'. Add
'augment-libc.so' phase when 'hurd-target?'.
[native-inputs]: Add MIG and PERL when 'hurd-target?'.
(glibc/hurd, glibc-for-target): Remove
(glibc/hurd-headers): Inherit from GLIBC, not GLIBC/HURD.
[arguments]: Remove "--enable-obsolete-rpc" configure flag and
'patch-configure-script' phase.
* gnu/packages/cross-base.scm (cross-kernel-headers)[xglibc/hurd-headers]:
Move 'set-cross-headers-path' after 'unpack'.
* gnu/packages/cross-base.scm (cross-libc)[cross-libc-for-target]:
Remove.
Pass "--disable-werror" when TARGET matches 'hurd-triplet?'.
* gnu/packages/hurd.scm (hurd-target?, patch-url): New procedures.
(gnumach-headers)[source](patches, modules, snippet): New fields.
(hurd-headers): Use Git commit 98b3390.
[native-inputs]: Add AUTOCONF and AUTOMAKE.
[arguments]: Add "ac_cv_func_*" configure flags.
(hurd-minimal)[native-inputs]: Remove.
[arguments]: In 'build' phase, build "include/assert-backtrace.h"
first.
