This is a follow-up of: <https://issues.guix.gnu.org/57232>
* gnu/installer/newt/partition.scm (run-label-page): Add a confirmation page
when dealing with an EFI installation.
Filter the devices that are smaller than 2GiB in the device selection list.
* gnu/installer/parted.scm (%min-device-size): New variable.
(non-install-devices): Rename it ...
(eligible-devices): ... this way. Filter the install device as well as the
small devices.
* gnu/installer/newt/partition.scm (run-partitioning-page): Adapt it.
Recommending ext4 over btrfs is probably ill-advised nowadays. See the
regular bug reports about running out of /gnu/store directory entries,
for which the documented fix then breaks booting with GRUB.
Instead, just list regular file systems alphabetically. We can bikeshed
bcachefs later ;-)
Move second-class file systems like NTFS to their own section at the end
of the list.
* gnu/packages/package-management.scm (run-fs-type-page): Reorder the
LISTBOX-ITEMS.
* gnu/installer/newt/partition.scm (run-fs-type-page): Add ‘xfs’ to the
list box.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type)
(partition-filesystem-user-type): Add ‘xfs’ mapping.
(create-xfs-file-system): New procedure.
(format-user-partitions): Use it.
* gnu/installer.scm (set-installer-path): Add xfsprogs.
Fixes: <https://issues.guix.gnu.org/49126>.
* gnu/installer/newt/partition.scm (run-disk-page): Fix the return value when
removing a free space partition.
* gnu/installer/parted.scm (&cannot-read-uuid): New condition.
(cannot-read-uuid?, cannot-read-uuid-partition): New procedures.
(check-user-partitions): Check that all user-partitions have a valid UUID,
raide the above condition otherwise.
* gnu/installer/newt/partition.scm (run-disk-page): Run an error page if the
&cannot-read-uuid condition is raised.
* gnu/installer/newt/partitions.scm (define-module): Use (ice-9 format).
(draw-formatting-page): Add parameter partitions and provide the list of
formatted partitions to the user.
(run-partitioning-page): Provide user-partitions to draw-formatting-page.
This adds support for creating and editing NTFS partitions. It is however not
possible yet to create root NTFS partitions, as overlaying on top of a fuse
partition does not seem supported.
* gnu/installer.scm (installer-program): Add "ntfs-3g" to the inputs.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type,
partition-filesystem-user-type, create-ntfs-file-system,
format-user-partitions): Add NTFS support.
* gnu/installer/newt/partition.scm (run-fs-type-page): Add NTFS support.
This will allow us to automate testing of the installer.
* gnu/installer/utils.scm (%client-socket-file)
(current-server-socket, current-clients): New variables.
(open-server-socket, call-with-server-socket): New procedure.
(with-server-socket): New macro.
(run-shell-command): Add call to 'send-to-clients'. Select on both
current-input-port and current-clients.
* gnu/installer/steps.scm (run-installer-steps): Wrap 'call-with-prompt'
in 'with-socket-server'. Call 'sigaction' for SIGPIPE.
* gnu/installer/newt/page.scm (watch-clients!, close-port-and-reuse-fd)
(run-form-with-clients, send-to-clients): New procedures.
(draw-info-page): Add call to 'run-form-with-clients'.
(run-input-page): Likewise. Handle EXIT-REASON equal to 'exit-fd-ready.
(run-confirmation-page): Likewise.
(run-listbox-selection-page): Likewise. Define 'choice->item' and use it.
(run-checkbox-tree-page): Likewise.
(run-file-textbox-page): Add call to 'run-form-with-clients'. Handle
'exit-fd-ready'.
* gnu/installer/newt/partition.scm (run-disk-page): Pass
#:client-callback-procedure to 'run-listbox-selection-page'.
* gnu/installer/newt/user.scm (run-user-page): Call
'run-form-with-clients'. Handle 'exit-fd-ready'.
* gnu/installer/newt/welcome.scm (run-menu-page): Define
'choice->item' and use it. Call 'run-form-with-clients'.
* gnu/installer/newt/final.scm (run-install-success-page)
(run-install-failed-page): When (current-clients) is non-empty, call
'send-to-clients' without displaying a choice window.
* gnu/installer/newt/partition.scm (run-fs-type-page): Add ‘jfs’ to the
list box.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type)
(partition-filesystem-user-type): Add ‘jfs’ mapping
(create-jfs-file-system): New procedure.
(format-user-partitions): Use it.
* gnu/installer.scm (set-installer-path): Add jfsutils.
* gnu/installer/parted.scm (data-partition?, metadata-partition?,
freespace-partition?, normal-partition?, extended-partition?,
logical-partition?): Remove, as now provided by Guile-Parted.
* gnu/installer/newt/partition.scm (run-disk-page): Remove disk-destroy calls,
replace disk-delete-all by disk-remove-all-partitions and
disk-delete-partition by disk-remove-partition*.
This fixes 55c43108 commit that renamed input-hide-checkbox? into
input-visibility-checkbox?.
* gnu/installer/newt/partition.scm (prompt-luks-passwords): Rename
input-hide-checkbox? into input-visibility-checkbox?.
Fixes <https://bugs.gnu.org/35783>.
This is a followup to 7d567af46b.
* gnu/installer/parted.scm (auto-partition!): Append ESP-PARTITION, when
it is true, to the result of 'create-adjacent-partitions!'.
* gnu/installer/newt/partition.scm (run-partioning-page): Remove
'initial-partitions' variable, and remove call to
'create-special-user-partitions'.
Co-authored-by: Mathieu Othacehe <m.othacehe@gmail.com>
Fixes <https://bugs.gnu.org/35731>.
* gnu/installer/newt/partition.scm (run-partioning-page)[run-page]:
Introduce 'initial-partitions' variable. Previously we'd call
'disk-partitions' after 'auto-partition' had done its job of creating
new partitions, and thus its result would contain the just-created
partitions. Consequently, 'create-special-user-partitions' would return
the ESP partition we just created, and thus it would appear twice in the
list.
* gnu/installer/newt/page.scm (run-input-page)[input-hide-checkbox?]: New
parameter adding a checkbox to toggle password hiding. By default, the
checkbox is active and the password is hence hided.
* gnu/installer/newt/partition.scm (prompt-luks-passwords): Enable the
previous parameter on both password input pages.
* gnu/installer/newt/user.scm (run-root-password-page): Enable the previous
parameter,
(confirm-password): ditto,
(run-user-add-page): add a checkbox to toggle password hiding.
Previously, the "Everything is one partition" entry would come first in
English but it would be second in French. This change keeps it the
first choice regardless of the language.
* gnu/installer/newt/partition.scm (run-scheme-page): Pass
#:sort-listbox-items? to 'run-scheme-page'.
Previously the "listbox" would be unnecessarily high, leaving too little
space for the German translation of the text above.
* gnu/installer/newt/partition.scm (run-disk-page): Increase
#:info-textbox-width and pass #:listbox-height.
* gnu/installer/newt/partition.scm (run-partioning-page): When METHOD is
'manual, use 'filter-map' on DEVICES, not 'map', since 'disk-new' can
return #f.
* gnu/installer.scm (set-installer-path): Add cryptsetup.
* gnu/installer/newt/partition.scm (prompt-luks-passwords): New procedure,
(run-partioning-page): Add the possibility to set encryption to "On" on a
partition and choose a label, add a new partition scheme: "Guided - using the
entire disk with encryption", prompt for encryption passwords before
proceeding to formating.
* gnu/installer/parted.scm (<user-partition>)[crypt-label],
[crypt-password]: New fields,
(partition-description): add the encryption label,
(user-partition-description): add an encryption field,
(auto-partition): add two partitioning schemes: entire-crypted-root and
entire-crypted-root-home,
(call-with-luks-key-file): new procedure,
(user-partition-upper-path): new procedure,
(luks-format-and-open): new procedure,
(luks-close): new procedure,
(format-user-partitions): format and open luks partitions before creating
file-system.
(mount-user-partitions): use the path returned by user-partition-upper-path,
(umount-user-partitions): close the luks partitions,
(user-partition->file-system): set device field to label for luks partitions
and to uuid for the rest,
(user-partition->mapped-device): new procedure,
(user-partitions->configuration): add mapped-devices field.
* gnu/installer/newt/partition.scm (run-disk-page)[guided?]: New argument.
Use guided? to determine if we are proceeding to a guided or a manuel
partitioning and precise it the title and info-text.
* gnu/installer/newt/partition.scm (run-label-page): Pass the button text as
an argument,
(run-disk-page): Call run-label-page with the appropriate button text.
