Cross-building a docker image with:
$ guix system image --image-type=docker --target=aarch64-linux-gnu os.scm
results in an image where the architecture declared in its config.json is
the host architecture rather than the target one. The binaries are
correctly cross-compiled, so the image can be loaded and used despite the
warning message shown by docker:
$ docker load -i vcal7bvsqcijchifhqdvprpd1niqh8sk-docker-image.tar.gz
Loaded image: guix:latest
$ docker create guix:latest
WARNING: The requested image's platform (linux/amd64) does not match the
detected host platform (linux/arm64/v8) and no specific platform was
requested
40f06aa869ed690489c4a3824a7f7721bd4bf453b85f25ac7199266939fe2fba
$ echo $?
0
This is fixed by passing the correct triplet to the build-docker-image
function.
* gnu/system/image.scm (system-docker-image) Add ‘image-target’ variable.
[builder]: Pass ‘#:system’ argument to ‘build-docker-image’.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Make the operating-system field mandatory as creating an image without it
makes no sense. Introduce a new macro, image-without-os for the specific cases
where the image is only created to be inherited from afterwards.
* gnu/image.scm (<image>)[operating-system]: Make it mandatory.
* gnu/system/image.scm (image-without-os): New macro.
(efi-disk-image, efi32-disk-image, iso9660-image, docker-image,
raw-with-offset-disk-image): Use it.
* gnu/system/images/hurd.scm (hurd-disk-image): Ditto.
Running the following command where my-pine.scm contains an operating-system
declaration:
guix system image --image-type=pine64-raw my-pine.scm
returns:
guix system: error: package linux-libre-arm64-generic@5.18.19 does not support
x86_64-linux
That's because there's no platform defined in the pine64-raw image-type, hence
the guix system image tries to build the image for the host architecture.
* gnu/system/images/novena.scm (novena-image-type): Use the armv7-linux platform.
* gnu/system/images/pine64.scm (pine64-image-type): Use the aarch64-linux platform.
* gnu/system/images/pinebook-pro.scm (pinebook-pro-image-type): Use the aarch64-linux platform.
* gnu/system/images/rock64.scm (rock64-image-type): Use the aarch64-linux platform.
* gnu/system/linux-container.scm (container-script): Accept command line
options to bind mount host directories into the container.
* doc/guix.texi (Invoking guix system): Document options.
* gnu/system/examples/vm-image.tmpl: Use the 'GUIX_DISPLAYED_VERSION'
environment variable in 'label'.
* gnu/system/install.scm (%installation-os): Likewise.
* Makefile.am (release): Set 'GUIX_DISPLAYED_VERSION'.
Fixes <https://issues.guix.gnu.org/53210>.
Reported by Mathieu Othacehe <othacehe@gnu.org>.
* gnu/system/install.scm (%installation-services): Set 'guix' to
use (current-guix) in 'guix-configuration'.
* gnu/system/examples/vm-image.tmpl: Likewise.
* gnu/tests/install.scm (operating-system-with-current-guix): Remove.
(run-install, installation-os-for-gui-tests): Remove its uses.
* Makefile.am (release): Remove intermediate use of
'update-guix-package.scm' and subsequent 'git commit' invocation.
Previously, the default value would lead to a wrong-type-to-apply crash.
* gnu/system/image.scm (system-disk-image)[image-builder]: When
'partition-initializer' returns #f, fall back to
INITIALIZE-ROOT-PARTITION.
* gnu/tests/base.scm (run-root-unmount-test)[test-image]: Remove
'initializer' field of partition.
* gnu/image.scm (<partition>)[initializer]: Add comment.
Previously 'system-image' would return *unspecified* in that case,
leading to a wrong-type-arg error crash down the road.
* gnu/system/image.scm (system-image): Add 'else' clause.
* gnu/bootloader/grub.scm (grub-efi32-bootloader): New variable.
(install-grub-efi32): New variable.
* gnu/build/bootloader.scm (install-efi): Add a 'targets' keyword
argument.
(install-efi-loader): Likewise.
* gnu/build/image.scm (initialize-efi32-partition): New procedure.
* gnu/packages/bootloaders.scm (grub-efi32): New variable.
* gnu/system/image.scm (esp32-partition): New variable
(efi32-disk-image): New variable.
(efi32-raw-image-type): New variable.
(system-disk-image)[partition-image]: Set '#:grub-efi32' when
calling the partition initializer.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Fixes <https://issues.guix.gnu.org/55806>.
* gnu/system/install.scm (%installation-services): Refactor into a
procedure, so that it can capture the system it's installing for.
Conditionally add uvesafb-service-type based on whether v86d is
supported by the target architecture.
(installation-os)[services]: Use the %installation-service procedure.
(uvesafb-shepherd-service): Remove %host-type checks.
Signed-off-by: Florian Pelz <pelzflorian@pelzflorian.de>
* gnu/build/image.scm (make-vfat-image): Pass fs-bits as an argument and force
1kb logical sector size only if "ESP" flag is set.
(make-partition-image): Add "fat32" partition type, support explicit "fat16"
type with vfat alias.
* gnu/system/image.scm (partition->dos-type partition): Return file system IDs
for "fat16" and "fat32" partitions.
(partition->gpt-type partition): Ditto.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/build/image.scm (sexp->partition): Add flags support.
* gnu/system/image.scm (partition->gexp): Ditto.
(system-disk-image): Set the genimage bootable flag if it is part of the
partition flags.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
This makes sure warnings like "incompatible bytecode version" don't go
through when looking for (guix store).
* gnu/system/file-systems.scm (%store-prefix): Parameterize
'current-warning-port' around 'resolve-module' call.
Fixes <https://issues.guix.gnu.org/54770>.
Regression introduced in 400c9ed3d7.
Previously, for an encrypted /home (say), "cryptsetup open" would be
invoked by shepherd, with /dev/null as its standard input. It would
thus run in non-interactive mode and, instead of asking for a
passphrase, fail with:
Nothing to read on input.
This change ensures it runs in interactive mode.
* gnu/build/file-systems.scm (system*/console, system*/tty): New
procedures.
* gnu/system/mapped-devices.scm (open-luks-device): Use 'system*/tty'
instead of 'system*'.
* gnu/system/images/novena.scm (novena-barebones-os)[kernel]: Use the
linux-libre-arm-generic kernel.
[initrd-modules]: Do not specify any modules as sdhci-esdhc-imx, ahci_imx and
i2c-dev are built-in in the arm-generic kernel.
This is to make it less surprising, given the common convention sets forth by
the kernel Linux command-line parameters.
* gnu/build/linux-boot.scm (boot-system): Rename '--load', '--repl', '--root'
and '--system' to 'gnu.load', 'gnu.repl', 'root' and 'gnu.system',
respectively. Adjust doc.
(find-long-option): Adjust doc.
* gnu/installer/parted.scm (installer-root-partition-path): Adjust accordingly.
* gnu/system.scm (bootable-kernel-arguments): Add a VERSION argument and
update doc. Use VERSION to conditionally return old style vs new style initrd
arguments.
(%boot-parameters-version): Increment to 1.
(operating-system-boot-parameters): Adjust doc.
(operating-system-boot-parameters-file): Likewise.
* gnu/system/linux-initrd.scm (raw-initrd, base-initrd): Likewise.
* doc/guix.texi: Adjust doc.
* gnu/build/activation.scm (boot-time-system): Adjust accordingly.
* gnu/build/hurd-boot.scm (boot-hurd-system): Likewise.
* gnu/packages/commencement.scm (%final-inputs-riscv64): Adjust comment.
These changes broke the creation of the 'linux-modules-database' for all kernel
series besides 5.15, 5.4, and 5.10, like this:
------
gnu/build/linux-modules.scm:257:5: kernel module not found "framebuffer_coreboot" "/gnu/store/yff45fr6q93mw44zdql9ffr95zcvwxcn-linux-libre-4.9.299/lib/modules"
------
We should support the coreboot framebuffer, but we need to test that change more
completely before deploying it.
This effectively reverts the following commits:
1dfe8c3721 "gnu: linux-libre: Build simplefb into all x86{,_64} kernels."
bc09e7ab56 "gnu: linux-libre: Support the Coreboot framebuffer."
Fixes <https://issues.guix.gnu.org/52667> "System reconfiguration fails to build
linux-modules.drv".
This is a follow-up to 49599fab56.
Fixes: <https://issues.guix.gnu.org/52908>.
* gnu/services/xorg.scm (set-xorg-configuration)[login-manager-service-type]:
When the current system or target system begins with the string "x86_64", use
gdm-service-type as before; otherwise, use sddm-service-type.
* gnu/system/examples/vm-image.tmpl (services): Add sddm-service-type to the
list of service types to remove.
