This is a follow-up of: 45eac6cdf5.
It fixes the following error:
+ mkfs.ext4 -L my-root /dev/vda2
sh: line 12: mkfs.ext4: command not found
* gnu/tests/install.scm (%test-iso-image-installer): Add e2fsprogs to the
appended packages.
Fixes <https://issues.guix.gnu.org/53210>.
Reported by Mathieu Othacehe <othacehe@gnu.org>.
* gnu/system/install.scm (%installation-services): Set 'guix' to
use (current-guix) in 'guix-configuration'.
* gnu/system/examples/vm-image.tmpl: Likewise.
* gnu/tests/install.scm (operating-system-with-current-guix): Remove.
(run-install, installation-os-for-gui-tests): Remove its uses.
* Makefile.am (release): Remove intermediate use of
'update-guix-package.scm' and subsequent 'git commit' invocation.
* gnu/tests/install.scm (run-install)[packages]: Unconditionally add to OS.
[NUMBER-OF-DISKS]: Add argument, update doc and adjust. The returned gexp
output is now a list of images rather than the image itself.
* gnu/tests/install.scm (qemu-command*): Rename IMAGE argument to IMAGES, to
account for the above change. Adjust doc. Generate a QEMU '-drive' argument
for each disk image.
(%test-installed-os): Rename the IMAGE variable to IMAGES.
(%test-installed-extlinux-os): Likewise.
(%test-iso-image-installer): Likewise.
(%test-separate-home-os): Likewise.
(%test-separate-store-os): Likewise.
(%test-raid-root-os): Likewise.
(%test-encrypted-root-os): Likewise.
(%test-lvm-separate-home-os): Likewise.
(%test-encrypted-root-not-boot-os): Likewise.
(%test-btrfs-root-os): Likewise.
(%test-btrfs-raid-root-os): Likewise.
(%test-btrfs-root-on-subvolume-os): Likewise.
(%test-jfs-root-os): Likewise.
(%test-f2fs-root-os): Likewise.
(%test-xfs-root-os): Likewise.
(guided-installation-test): Likewise.
* gnu/tests/install.scm (qemu-command/writable-image): Replace the use of a
writable backing file by the use of the '-snapshot' option, and rename to...
(qemu-command*): ... this, adjusting all calls.
We had several bug reports with a root cause of "the clock was
incorrect" from users who used the installer to install a non-graphical
Guix System.
* gnu/installer/services.scm (%system-services): Add the ntp-service-type.
* gnu/installer/newt/services.scm (run-system-administration-cbt-page): New
variable.
(run-services-page): Use run-system-administration-cbt-page when not
installing a desktop.
* gnu/installer/tests.scm (choose-services): Add and use a
choose-misc-service? procedure.
* gnu/tests/install.scm (installation-target-os-for-gui-tests)<services>: Add
ntp-service-type.
This code duplicates the (gnu system image) and (gnu build image) code. Using
VM for image generation is not needed, not portable and really slow. Remove
all the VM image generation code to make sure that only the image API is used.
* gnu/build/vm.scm: Remove it. Move the qemu-command procedure to ...
* gnu/build/marionette.scm: ... here.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it.
* tests/modules.scm: Ditto.
* gnu/tests/install.scm: Ditto.
* gnu/system/vm.scm: Adapt it and remove expression->derivation-in-linux-vm,
qemu-img, system-qemu-image/shared-store and system-docker-image procedures.
* doc/guix.texi (G-Expressions): Adapt it.
Use a CEST timezone as this is the assumed timezone in the run-basic-test
procedure.
* gnu/tests/install.scm (%encrypted-root-not-boot-os,
%btrfs-root-on-subvolume-os): Use a CEST timezone.
Fixes a regression introduced in
0b5e128750, whereby 'qemu-img create ...'
as used here would fail with:
qemu-img: disk.img: Backing file specified without backing format
thereby breaking tests from (gnu tests install).
* gnu/tests/install.scm (qemu-command/writable-image): Pass "-F qcow2".
Fixes <https://issues.guix.gnu.org/40997>.
* gnu/bootloader.scm (<bootloader-configuration>): New 'targets' field.
(%bootloader-configuration-target): New procedure.
(bootloader-configuration-target): Add deprecation warning.
(bootloader-configuration-targets): New procedure.
* guix/scripts/system.scm (install): Access targets via
bootloader-configuration-targets.
(perform-action)[bootloader-target]: Remove unused argument and update doc.
Access targets via bootloader-configuration-targets and fix indentation.
(process-action): Access targets via bootloader-configuration-targets.
Do not provide the unused BOOTLOADER-TARGET argument when applying
`perform-action'.
* guix/scripts/system/reconfigure.scm (install-bootloader-program): Rename
DEVICE argument to DEVICES. Adjust doc and comment. Apply `installer' and
`disk-installer' for every DEVICES.
(install-bootloader): Access targets via bootloader-configuration-targets and
rename variable from DEVICE to DEVICES.
* gnu/tests/install.scm: Adjust accordingly.
* tests/guix-system.sh: Likewise.
* gnu/tests/reconfigure.scm (run-install-bootloader-test): Adjust the DEVICES
argument so that it is a list.
* doc/guix.texi: Update doc.
* gnu/installer/tests.scm (choose-services): Accept a new
choose-other-service? keyword argument, defaulting to false.
Expect an "Other services" checkbox-list. Update docstring.
* gnu/installer/tests.scm (conclude-installation): Rename it into ...
(start-installation): ... this new procedure.
(complete-installation): New procedure.
(choose-partitioning): Add an uefi-support? argument.
* gnu/tests/install.scm (uefi-firmware): New procedure.
(run-install, qemu-command/writable-image, gui-test-program,
installation-target-os-for-gui-tests): Add an uefi-support? argument.
(%extra-packages): Add grub-efi, fatfsck/static and dosfstools.
(%test-gui-installed-os): New variable.
* gnu/bootloader/grub.scm (grub-configuration-file): New parameter
store-crypto-devices.
[crypto-devices]: New helper function.
[builder]: Use crypto-devices.
* gnu/machine/ssh.scm (roll-back-managed-host): Use
boot-parameters-store-crypto-devices to provide its contents to the
bootloader configuration generation process.
* gnu/tests/install.scm (%encrypted-root-not-boot-os,
%encrypted-root-not-boot-os): New os declaration.
(%encrypted-root-not-boot-installation-script): New script, whose contents
were initially taken from %encrypted-root-installation-script.
(%test-encrypted-root-not-boot-os): New test.
* gnu/system.scm (define-module): Export
operating-system-bootoader-crypto-devices and
boot-parameters-store-crypto-devices.
(<boot-parameters>): Add field store-crypto-devices.
(read-boot-parameters): Parse store-crypto-devices field.
[uuid-sexp->uuid]: New helper function extracted from
device-sexp->device.
(operating-system-bootloader-crypto-devices): New function.
(operating-system-bootcfg): Use
operating-system-bootloader-crypto-devices to provide its contents to
the bootloader configuration generation process.
(operating-system-boot-parameters): Add store-crypto-devices to the
generated boot-parameters.
(operating-system-boot-parameters-file): Likewise to the file with
the serialized structure.
* guix/scripts/system.scm (reinstall-bootloader): Use
boot-parameters-store-crypto-devices to provide its contents to the
bootloader configuration generation process.
* tests/boot-parameters.scm (%default-store-crypto-devices): New
variable.
(%grub-boot-parameters, test-read-boot-parameters): Use
%default-store-crypto-devices.
(tests store-crypto-devices): New tests.
Note: This change requires an updated 'guix' package that contains
Linux-swap support in (gnu build file-systems).
* gnu/installer/parted.scm (user-partitions->configuration): Use UUIDs
in the 'swap-devices' field.
* gnu/installer/newt/final.scm (run-final-page)[wait-for-clients]: New
procedure. Use it.
* gnu/installer/tests.scm (choose-partitioning): Wait for
'starting-final-step' message and move configuration file dialog
handling to...
(conclude-installation): ... here. Send over PORT the reply
corresponding to 'starting-final-step'.
* gnu/tests/install.scm (gui-test-program): When ENCRYPTED? is false,
invoke 'swaplabel' in the marionette.
(installation-target-os-for-gui-tests): When ENCRYPTED? is false, except
a fixed UUID.
* gnu/system/image.scm (image-with-os): New macro. Rename the old
"image-with-os" procedure to ...
(image-with-os*): ... this new procedure,
(system-image): adapt according,
(raw-image-type, iso-image-type, uncompressed-iso-image-type
%image-types): new variables,
(lookup-image-type-by-name): new procedure.
(find-image): remove it.
* gnu/system/images/hurd.scm (hurd-image-type): New variable,
use it to define ...
(hurd-disk-image): ... this variable, using "os->image" procedure.
* gnu/tests/install.scm (run-install): Rename
installation-disk-image-file-system-type parameter to installation-image-type,
use os->config instead of find-image to compute the image passed to system-image,
(%test-iso-image-installer) adapt accordingly,
(guided-installation-test): ditto.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/tests/base.scm (run-basic-test): Add a 'desktop?' argument. Wait 30
seconds before trying to switch to TTY1 on desktop.
* gnu/tests/install.scm (guided-installation-test): Use 512MiB of RAM and pass
the desktop argument to "run-basic-test".
Commits 0eed771275 and
614a1e3fa2 caused a ~150M increase of the image
size. Increase the image size limit by 200M until the situation is addressed.
* gnu/tests/install.scm (%simple-installation-script,
%extlinux-gpt-installation-script, %simple-installation-script-for-/dev/vda,
%raid-root-installation-script, %encrypted-root-installation-script): Increase
image size limit by 200M.
If the marionette shuts down before the script return is received, then status
will be <eof>.
* gnu/tests/install.scm (run-install): Allow status to be the <eof> object.
Now that installing Grub on raw disk-images is supported, we do not need to
rely on (gnu system vm) module.
* gnu/system/image.scm (make-system-image): Rename to ...
(system-image): ... this, and remove the compatibility wrapper.
(find-image): Turn to a monadic procedure. This will become useful when
introducing Hurd support, to be able to detect the target system.
* gnu/ci.scm (qemu-jobs): Use lower-object now that system-image returns a
file-like object.
* gnu/tests/install.scm (run-install): Ditto.
* guix/scripts/system.scm (system-derivation-for-action): Add a 'base-image'
argument,
(perform-action): adapt accordingly.
* gnu/bootloader/grub.scm (strip-mount-point): Remove procedure.
(normalize-file): Add procedure.
(grub-configuration-file): New BTRFS-SUBVOLUME-FILE-NAME parameter. When
defined, prepend its value to the kernel and initrd file names, using the
NORMALIZE-FILE procedure. Adjust the call to EYE-CANDY to pass the
BTRFS-SUBVOLUME-FILE-NAME argument. Normalize the KEYMAP file as well.
(eye-candy): Add a BTRFS-SUBVOLUME-FILE-NAME parameter, and use it, along with
the NORMALIZE-FILE procedure, to normalize the FONT-FILE and IMAGE nested
variables. Adjust doc.
* gnu/bootloader/depthcharge.scm (depthcharge-configuration-file): Adapt.
* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Likewise.
* gnu/system/file-systems.scm (btrfs-subvolume?)
(btrfs-store-subvolume-file-name): New procedures.
* gnu/system.scm (operating-system-bootcfg): Specify the Btrfs
subvolume file name the store resides on to the
`operating-system-bootcfg' procedure, using the new
BTRFS-SUBVOLUME-FILE-NAME argument.
* doc/guix.texi (File Systems): Add a Btrfs subsection to document the use of
subvolumes.
* gnu/tests/install.scm (%btrfs-root-on-subvolume-os)
(%btrfs-root-on-subvolume-os-source)
(%btrfs-root-on-subvolume-installation-script)
(%test-btrfs-root-on-subvolume-os): New variables.
Raw disk-images and ISO9660 images are created in a Qemu virtual machine. This
is quite fragile, very slow, and almost unusable without KVM.
For all these reasons, add support for host image generation. This implies the
use new image generation mechanisms.
- Raw disk images: images of partitions are created using tools such as mke2fs
and mkdosfs depending on the partition file-system type. The partition
images are then assembled into a final image using genimage.
- ISO9660 images: the ISO root directory is populated within the store. GNU
xorriso is then called on that directory, in the exact same way as this is
done in (gnu build vm) module.
Those mechanisms are built upon the new (gnu image) module.
* gnu/image.scm: New file.
* gnu/system/image.scm: New file.
* gnu/build/image: New file.
* gnu/local.mk: Add them.
* gnu/system/vm.scm (system-disk-image): Rename to system-disk-image-in-vm.
* gnu/ci.scm (qemu-jobs): Adapt to new API.
* gnu/tests/install.scm (run-install): Ditto.
* guix/scripts/system.scm (system-derivation-for-action): Ditto.
This is a follow-up of a860eddbbd. Guided
installation tests are now run from an ISO image. Hence the main block device
is vda and not vdb anymore.
* gnu/tests/install.scm (installation-target-os-for-gui-tests): Use
%minimal-os-on-vda instead of %minimal-os.
(%minimal-os-on-vda): Make sure that it replicates the config of %minimal-os.
This is a follow-up of a860eddbbd. If using an
ISO, the main disk is vda and not vdb anymore.
* gnu/tests/install.scm (installation-target-os-for-gui-tests): Use vda2 as
swap partition.
It seems that 'guix system init' is consuming more than the 800M of RAM
currently allocated. Until this is understood, bump the limit to 1.2G.
Reported here:
https://lists.gnu.org/archive/html/bug-guix/2020-04/msg00519.html
* gnu/tests/install.scm (run-install): Bump RAM to 1.2G.
* gnu/tests/install.scm (gui-test-program): Add a desktop? argument, and pass it to choose-services,
(installation-target-os-for-gui-tests): new procedure,
(installation-target-desktop-os-for-gui-tests): new procedure,
(guided-installation-test): add target-os and desktop? arguments. Use
target-os instead of the previous os variable. Pass desktop? argument to
gui-test-program.
(%test-gui-installed-os): Adapt accordingly,
(%test-gui-installed-os-encrypted): ditto,
(%test-gui-installed-desktop-os-encrypted): new exported variable.
When marionette-eval calls fail in gui-test-program, the installation
continues which results in two scenarios:
- hang forever at the next marionette-eval call,
- keep going and start a broken installation, which is annoying because it
clears the terminal and hides the error.
Make sure that gui-test-program is exited with #f return code when one of the
marionette-eval calls fail.
* gnu/tests/install.scm (gui-test-program): Add a new macro
"marionette-eval*". Throw an exception when one on the marionette-eval calls
fail.
Fixes <https://bugs.gnu.org/39926>.
Reported by Maxim Cournoyer <maxim.cournoyer@gmail.com>.
Previously we'd error out if the installation script exits with
non-zero, which was the case because the 'reboot' program would
typically not get a reply, and thus would eventually be killed by PID 1
as the system is brought down.
* gnu/tests/install.scm (run-install)[install]: Expect SCRIPT to exit
with SIGTERM in addition to exiting with zero.
* gnu/tests/install.scm (%test-gui-installed-os-encrypted): New variable,
(guided-installation-test): set a swap-device only if there is no encryption.
Fixes <https://bugs.gnu.org/38086>.
Thanks to Vagrant and Tobias!
* gnu/tests/install.scm (%raid-root-os)[initrd-modules]: Add "raid1"
instead of "raid0".
(%raid-root-installation-script): Make the partitions twice as big.
Invoke 'mdadm' with '--level=mirror' instead of '--level=stripe';
connect "yes" to its stdin.
(%test-raid-root-os): Set #:target-size to 2.8 GiB.
