Fixes: <https://issues.guix.gnu.org/45378>.
* gnu/installer/newt/keymap.scm (run-layout-page): Return false when
"Continue" button is pressed.
(run-keymap-page): Do not try to compute variants if layout is false. Also do
not try to format the result if layout is false.
* gnu/installer.scm (compute-keymap-step): Do not apply keymap if
"run-keymap-page" returns false.
This reverts commit aecd2a13cb for two
reasons:
1. The warning would fire every time (gnu services ssh) is loaded;
2. There's still no clear consensus on the approach to follow as
discussed in <https://issues.guix.gnu.org/44808>.
Fixes <https://bugs.gnu.org/44808>.
Reported by Christopher Lemmer Webber <cwebber@dustycloud.org>.
* gnu/services/ssh.scm (true-but-soon-false): New procedure.
(<openssh-configuration>)[password-authentication?]: Change default to
'true-but-soon-false'.
* gnu/installer/services.scm (%system-services): Explicitly set
'password-authentication?' to #f.
Reported by Florian Pelz:
https://lists.gnu.org/archive/html/guix-devel/2020-11/msg00326.html.
* gnu/installer/utils.scm (call-with-time): New procedure,
(let/time): new macro.
* gnu/installer/parted.scm (with-delay-device-in-use?): Increase the retry
count to 16.
(non-install-devices): Remove the call to with-delay-device-in-use? as it
doesn't return the expected result, and would block much longer now.
(free-parted): Log the time required to sync each device.
* gnu/installer/newt/partitions.scm (define-module): Use (ice-9 format).
(draw-formatting-page): Add parameter partitions and provide the list of
formatted partitions to the user.
(run-partitioning-page): Provide user-partitions to draw-formatting-page.
Note: This change requires an updated 'guix' package that contains
Linux-swap support in (gnu build file-systems).
* gnu/installer/parted.scm (user-partitions->configuration): Use UUIDs
in the 'swap-devices' field.
* gnu/installer/newt/final.scm (run-final-page)[wait-for-clients]: New
procedure. Use it.
* gnu/installer/tests.scm (choose-partitioning): Wait for
'starting-final-step' message and move configuration file dialog
handling to...
(conclude-installation): ... here. Send over PORT the reply
corresponding to 'starting-final-step'.
* gnu/tests/install.scm (gui-test-program): When ENCRYPTED? is false,
invoke 'swaplabel' in the marionette.
(installation-target-os-for-gui-tests): When ENCRYPTED? is false, except
a fixed UUID.
* gnu/installer/final.scm (call-with-mnt-container): New procedure,
(install-system): use it instead of call-with-container, to make sure that the
container is not jailed.
When the store overlay is mounted, other processes such as kmscon, udev
and guix-daemon may open files from the store, preventing the
underlying install support from being umounted. See:
https://lists.gnu.org/archive/html/guix-devel/2018-12/msg00161.html.
To avoid this situation, mount the store overlay inside a container,
and run the installation from within that container.
* gnu/build/shepherd.scm (fork+exec-command/container): New procedure.
* gnu/services/base.scm (guix-shepherd-service): Support an optional PID
argument passed to the "start" method. If that argument is passed, ensure that
guix-daemon enters the given PID MNT namespace by using
fork+exec-command/container procedure.
* gnu/installer/final.scm (umount-cow-store): Remove it,
(install-system): run the installation from within a container.
* gnu/installer/newt/final.scm (run-install-shell): Remove the display hack.
If a device contains an active logical volume, BLKRRPART will report that the
device is busy. This will cause this device to be filtered by
"non-install-devices" procedure, which is not desired.
Make sure to deactivate all logical volumes before device probing.
Fixes <https://issues.guix.gnu.org/42683>.
* gnu/installer.scm (installer-program): Add lvm2-static to the inputs.
* gnu/installer/parted.scm (remove-logical-devices): New procedure,
(init-parted): call it.
This adds support for creating and editing NTFS partitions. It is however not
possible yet to create root NTFS partitions, as overlaying on top of a fuse
partition does not seem supported.
* gnu/installer.scm (installer-program): Add "ntfs-3g" to the inputs.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type,
partition-filesystem-user-type, create-ntfs-file-system,
format-user-partitions): Add NTFS support.
* gnu/installer/newt/partition.scm (run-fs-type-page): Add NTFS support.
When debugging the installation tests, it can be very handy to be able to read
"guix system init" command output.
* gnu/installer/final.scm (install-system): Dump installation command output
to the console when running the installation tests.
When debugging the installation tests, it can be very handy to be able to read
"run-command" output, for instance when executing "guix system init".
Introduce a new "invoke-with-log" procedure that is able to log a command
standard and error outputs to the syslog. Use it, only when running the
installation tests, to dump "run-command" output.
* gnu/installer/utils.scm (open-pipe-with-stderr, invoke-with-log): New
procedures,
(invoke-log-port): new variable,
(run-command): move to the end of the file and use invoke-with-log when
running the installation tests.
Issue reported by SergioBG here:
https://lists.gnu.org/archive/html/bug-guix/2020-04/msg00432.html.
Due to default buffering mode, the installer was reading from the pipe without
having actually written a command before.
* gnu/installer/connman.scm (connman-connect-with-auth): Set pipe buffering
mode to 'line.
According to glibc manual, locale are under the following form:
language[_territory[.codeset]][@modifier]
The esperanto locale "epo" does not have a territory. Modify run-command to
take this into account.
Reported by Alex Sassmannshausen here:
https://lists.gnu.org/archive/html/guix-devel/2020-04/msg00192.html.
* gnu/installer/utils.scm (run-command): Handle locale without territory such
as "epo".
Previously for Azerbaijani, no Latin layout but only the Cyrillic variant
could be selected.
* gnu/installer/newt/keymap.scm (add-empty-variant): New procedure.
(run-keymap-page): Use it to insert an empty variant.
* gnu/installer/proxy.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* gnu/installer/newt/parameters.scm (run-proxy-page): New procedure,
(run-parameters-page): add the previous procedure to the parameters menu.
* gnu/installer/newt/page.scm (run-input-page): Remove component argument that
is not longer passed to the procedure passed to 'add-component-callback',
(run-listbox-selection-page): ditto.
* gnu/installer/newt/user.scm (run-user-add-page): Ditto,
(run-user-add-page): ditto.
* gnu/installer/newt/help.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* gnu/installer/record.scm (<installer>): Add 'help-menu' and 'help-page'
fields,
(installer-help-menu, installer-help-page): new exported procedures.
* gnu/installer/newt.scm (init): Set the help line,
(help-menu, help-page): new procedures used ...
(newt-installer): ... here.
* gnu/installer/newt/keymap.scm (run-layout-page): Add a context argument to
differenciate the help context from the main one,
(run-keymap-page): add a context argument and pass it to run-layout-page.
* gnu/installer.scm (compute-keymap-step): Add a context argument and pass it
to 'installer-keymap-page',
(installer-steps): set the help menu and pass the appropriate context to
compute-keymap-step calls,
(guile-newt): update to revision 2.
* gnu/installer/tests.scm (choose-services): Turn desktop-environments list
into a choose-desktop-environment procedure. This way, it is easier to select
all desktop-environments or none, in the same way as choose-network-service?
and choose-network-management-tool? arguments.
This fixes <https://bugs.gnu.org/39712>.
The guix-daemon was preventing the cow-store umount, so restart it. Some
udevd workers, using cow-store files might also still be around, so have some
umount retries.
* gnu/installer/final.scm (kill-cow-users): New procedure,
(umount-cow-store): restart guix-daemon and kill all processes started from
within the cow-store before trying to umount the store overlay. Also try 5
times to umount the overlay in case it is still busy.
* gnu/installer/utils.scm (run-shell-command): Rename to...
(run-command): Remove call to 'call-with-temporary-output-file' and hop
through Bash. Expect COMMAND to be a list of strings rather than a
string.
* gnu/installer/final.scm (install-system): Turn INSTALL-COMMAND into a
list of strings and pass it to 'run-command'.
* gnu/installer/newt/page.scm (edit-file): Likewise.
This is useful for automated tests.
* gnu/installer/newt/network.scm (wait-service-online)[online?]: New
procedure. Check for /tmp/installer-assume-online.
Use it instead of 'connman-online?'.
