Enable the QEMU guest agent interface in marionette VMs, run the
qemu-guest-agent service in one and try talking to it.
* gnu/build/marionette.scm (make-marionette): Enable the guest agent device.
* gnu/tests/virtualization.scm (run-qemu-guest-agent-test): New procedure.
(%test-qemu-guest-agent): New variable.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/bootloader/grub.scm (grub-efi32-bootloader): New variable.
(install-grub-efi32): New variable.
* gnu/build/bootloader.scm (install-efi): Add a 'targets' keyword
argument.
(install-efi-loader): Likewise.
* gnu/build/image.scm (initialize-efi32-partition): New procedure.
* gnu/packages/bootloaders.scm (grub-efi32): New variable.
* gnu/system/image.scm (esp32-partition): New variable
(efi32-disk-image): New variable.
(efi32-raw-image-type): New variable.
(system-disk-image)[partition-image]: Set '#:grub-efi32' when
calling the partition initializer.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami'
and 'jami-provisioning' system tests to pass again.
In version 0.9.0, Shepherd constructors are now run concurrently, via
cooperative scheduling (Guile Fibers). The Jami service previously relied on
blocking sleeps while polling for D-Bus services to become ready after forking
a process; this wouldn't work anymore since while blocking the service process
wouldn't be given the chance to finish starting. The new reliance on Fibers
in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant
that it wouldn't work outside of Shepherd anymore. Finally, the
'start-service' Shepherd procedure used in the test suite would cause the Jami
daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0).
To fix/simplify these problems, this change does the following:
1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify
things, such as avoiding the need to fork 'dbus-send' processes.
2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries'
waiting syntax.
3. A 'dbus' package variant is used to adjust the session bus configuration,
tailoring it for the use case at hand.
4. Avoid start-service in the tests, preferring 'jami-service-available?' for
now.
* gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes)
(deserialize-item, serialize-boolean, dbus-dict->alist)
(dbus-array->list, parse-account-ids, parse-account-details)
(parse-contacts): Delete procedures.
(%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group)
(%send-dbus-debug): Delete parameters.
(jami-service-running?): New procedure.
(send-dbus/configuration-manager): Rename to...
(call-configuration-manager-method): ... this. Turn METHOD into a positional
argument. Turn ARGUMENTS into an optional argument. Invoke
`call-dbus-method' instead of `send-dbus', adjusting callers accordingly.
(get-account-ids, id->account-details, id->account-details)
(id->volatile-account-details, username->id, add-account remove-account)
(username->contacts, remove-contact, add-contact, set-account-details)
(set-all-moderators, username->all-moderators?, username->moderators)
(set-moderator): Adjust accordingly.
(with-retries, send-dbus, dbus-available-services)
(dbus-service-available?): Move to ...
* gnu/build/dbus-service.scm: ... this new module.
(send-dbus): Rewrite to use the Guile AC/D-Bus library.
(%dbus-query-timeout, sleep*): New variables.
(%current-dbus-connection): New parameter.
(initialize-dbus-connection!, argument->signature-type)
(call-dbus-method): New procedures.
(dbus-available-services): Adjust accordingly.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register new module.
* gnu/packages/glib.scm (dbus-for-jami): New variable.
* gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to
dbus-for-jami.
(jami-dbus-session-activation): Write a D-Bus daemon configuration file at
'/var/run/jami/session-local.conf'.
(jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers
as extensions. Adjust imported modules. Remove no longer used parameters.
<jami-dbus-session>: Use a PID file, avoiding the need for the manual
synchronization.
<jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using
'jami-service-available?' instead of 'dbus-service-available?'.
* gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set
DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use
'jami-service-available?' to determine if the service is started rather than
the now problematic Shepherd's 'start-service'.
* gnu/build/image.scm (make-vfat-image): Pass fs-bits as an argument and force
1kb logical sector size only if "ESP" flag is set.
(make-partition-image): Add "fat32" partition type, support explicit "fat16"
type with vfat alias.
* gnu/system/image.scm (partition->dos-type partition): Return file system IDs
for "fat16" and "fat32" partitions.
(partition->gpt-type partition): Ditto.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/build/image.scm (sexp->partition): Add flags support.
* gnu/system/image.scm (partition->gexp): Ditto.
(system-disk-image): Set the genimage bootable flag if it is part of the
partition flags.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/build/linux-container.scm (wait-child-process)
(status->exit-status): New procedures.
(call-with-container): Add #:child-is-pid1? parameter and honor it.
[thunk*]: New variable. Pass it to 'run-container'.
Previously we could enter the blocking 'waitpid' call and miss an
opportunity to run the signal handler async.
* gnu/build/linux-container.scm (call-with-container)
[periodically-schedule-asyncs]: New procedure.
[install-signal-handlers]: Call it.
To support the argument introduced in Shepherd 0.9.0 when defining
container-bound services.
* gnu/build/shepherd.scm (exec-command*)
(make-forkexec-constructor/container): Add '#:supplementary-groups'.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Fixes a regression introduced in
938448bf40 whereby
'fork+exec-command/container' would return #t, then used as the running
value of the 'guix-daemon' service in the installer. Upon installation
completion, stopping the 'guix-daemon' service would fail with
wrong-type-arg because that #t would be passed to the 'stop' method in
lieu of a PID.
* gnu/build/shepherd.scm (fork+exec-command/container): Return a PID
rather than #t.
Fixes a regression introduced in
938448bf40 where 'exec-command*' could
get #:directory #f, in particular when called by
'fork+exec-command/container'.
* gnu/build/shepherd.scm (exec-command*): Add default value for #:directory.
This ensures those programs, if invoked by shepherd (where standard
input is /dev/null), can still interact with the user if needed.
* gnu/build/file-systems.scm (check-ext2-file-system)
(check-bcachefs-file-system, check-btrfs-file-system):
(check-fat-file-system, check-jfs-file-system):
(check-f2fs-file-system, check-ntfs-file-system):
(check-xfs-file-system): Use 'system*/tty' instead of 'system*'.
Fixes <https://issues.guix.gnu.org/54770>.
Regression introduced in 400c9ed3d7.
Previously, for an encrypted /home (say), "cryptsetup open" would be
invoked by shepherd, with /dev/null as its standard input. It would
thus run in non-interactive mode and, instead of asking for a
passphrase, fail with:
Nothing to read on input.
This change ensures it runs in interactive mode.
* gnu/build/file-systems.scm (system*/console, system*/tty): New
procedures.
* gnu/system/mapped-devices.scm (open-luks-device): Use 'system*/tty'
instead of 'system*'.
This lets the 'childhurd' service start in the background, letting
shepherd perform other tasks in the meantime, including serving
clients (such as the 'herd' command).
* gnu/build/secret-service.scm (with-modules): New macro.
(wait-for-readable-fd): Add cooperative implementation when Fibers is in
use.
(secret-service-send-secrets): Define 'sleep' so that it cooperates when
Fibers is in use.
* gnu/build/shepherd.scm (exec-command*): New procedure, with code
formerly...
(make-forkexec-constructor/container): ... here. Use it.
(fork+exec-command/container): Use 'fork+exec-command' only when
CONTAINER-SUPPORT? is false or PID is the current process.
* gnu/build/linux-boot.scm (boot-system): Honor rootfstype and rootflags
arguments. Update doc. Error out in case there is insufficient information
with regard to the root file system.
Restore the behavior of inferring the root device from the root file system
from the operating system in case the root argument is not provided.
* doc/guix.texi (Initial RAM Disk): Document the new command-line parameters.
This is to make it less surprising, given the common convention sets forth by
the kernel Linux command-line parameters.
* gnu/build/linux-boot.scm (boot-system): Rename '--load', '--repl', '--root'
and '--system' to 'gnu.load', 'gnu.repl', 'root' and 'gnu.system',
respectively. Adjust doc.
(find-long-option): Adjust doc.
* gnu/installer/parted.scm (installer-root-partition-path): Adjust accordingly.
* gnu/system.scm (bootable-kernel-arguments): Add a VERSION argument and
update doc. Use VERSION to conditionally return old style vs new style initrd
arguments.
(%boot-parameters-version): Increment to 1.
(operating-system-boot-parameters): Adjust doc.
(operating-system-boot-parameters-file): Likewise.
* gnu/system/linux-initrd.scm (raw-initrd, base-initrd): Likewise.
* doc/guix.texi: Adjust doc.
* gnu/build/activation.scm (boot-time-system): Adjust accordingly.
* gnu/build/hurd-boot.scm (boot-hurd-system): Likewise.
* gnu/packages/commencement.scm (%final-inputs-riscv64): Adjust comment.
Adds low-level support for launching Linux containers with cgroup namespaces.
* gnu/build/linux-container.scm (%namespaces): Add 'cgroup.
(namespaces->bit-mask): Handle it.
* guix/build/syscalls.scm (CLONE_NEWCGROUP): New variable.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Fixes <https://issues.guix.gnu.org/52539>.
Reported by Jacob First <jacob.first@member.fsf.org>.
* gnu/build/accounts.scm (allocate-passwd): Add comment as to why
'real-name' is taken from PREVIOUS. Add (not system?) to the
condition.
* gnu/system.scm (operating-system-etc-service) <login.defs>: Add
"CHFN_RESTRICT".
* gnu/system.scm (%setuid-programs): Add "chfn".
* gnu/system/pam.scm (base-pam-services): Add "chfn".
* doc/guix.texi (User Accounts): Document it.
This code duplicates the (gnu system image) and (gnu build image) code. Using
VM for image generation is not needed, not portable and really slow. Remove
all the VM image generation code to make sure that only the image API is used.
* gnu/build/vm.scm: Remove it. Move the qemu-command procedure to ...
* gnu/build/marionette.scm: ... here.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it.
* tests/modules.scm: Ditto.
* gnu/tests/install.scm: Ditto.
* gnu/system/vm.scm: Adapt it and remove expression->derivation-in-linux-vm,
qemu-img, system-qemu-image/shared-store and system-docker-image procedures.
* doc/guix.texi (G-Expressions): Adapt it.
* gnu/build/chromium-extension.scm (make-crx): Use a Chromium profile relative
to the build directory instead of /tmp. While here, remove obsolete comment.
* gnu/build/chromium-extension.scm (make-crx): Pass #:keep-mtime? #t to
COPY-RECURSIVELY. Remove defunct FAKETIME workaround. While at it, pack the
extension in the scratch working directory instead of the transient
store-mapped /tmp.
* gnu/build/chromium-extension.scm (make-crx): Delay with-imported-modules
until the builder code.
(crx->chromium-json): Remove needless define* while at it.
* gnu/build/chromium-extension.scm (chromium-json->profile-object): Remove
variable.
(file-sha256): New variable.
(make-chromium-extension): Rename OUTPUT parameter to prevent conflict.
Adjust other variable names for clarity.
[inputs]: Clear.
[arguments]: Inline and simplify the final transformation with a gexp.
Loading the framebuffer-coreboot module simply fails with EINVAL on a
non-Corebooted system. Crashing the system with a kernel panic is not
a reasonable reaction to loading valid modules on unsupported hardware.
The kernel should log an error, which the user is expected to see.
Bogus module names will still be fatally reported by linux-modules.drv.
* gnu/build/linux-modules.scm (load-linux-module*):
Ignore EINVAL errors when operating recursively.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
* gnu/services/virtualization.scm (secret-service-activation): Remove.
(secret-service-shepherd-services): New procedure.
(secret-service-type)[extensions]: Remove ACTIVATION-SERVICE-TYPE
extension. Add SHEPHERD-ROOT-SERVICE-TYPE and
USER-PROCESSES-SERVICE-TYPE extensions.
* gnu/build/secret-service.scm (delete-file*): New procedure.
(secret-service-receive-secrets): Use it.
* gnu/build/file-systems.scm (ext2-superblock-volume-name)
(bcachefs-superblock-volume-name, btrfs-superblock-volume-name)
(fat32-superblock-volume-name, fat16-superblock-volume-name)
(iso9660-superblock-volume-name, jfs-superblock-volume-name)
(f2fs-superblock-volume-name): Mention the file system type in the
docstring for consistency with the other superblock procedures.
* guix/cpio.scm (device-number, device->major+minor):
Move to, and subsequently import from, …
* guix/build/syscalls.scm (device-number, device-number->major+minor):
…here. Note the slight name change.
(mounts): Replace 16-bit open code with a DEVICE-NUMBER call.
* gnu/build/linux-boot.scm (device-number):
Remove duplicate 16-bit implementation in favour of the one above.
(resume-if-hibernated): Reuse DEVICE-NUMBER->MAJOR+MINOR.
It was never guaranteed to be run for non-root file systems. It was for
root file systems only due to a bug now fixed.
* gnu/build/file-systems.scm (check-btrfs-file-system): Don't invoke
‘btrfs device scan’ here.
* gnu/system/linux-initrd.scm (raw-initrd): Do so here if any btrfs file
systems are present.
* gnu/build/file-systems.scm (check-ext2-file-system)
(check-bcachefs-file-system, check-btrfs-file-system)
(check-fat-file-system, check-jfs-file-system, check-f2fs-file-system)
(check-ntfs-file-system, check-file-system): Take and honour new FORCE?
and REPAIR arguments. Update the docstring. Adjust all callers.
* gnu/system/file-systems.scm <file-system>: Add new SKIP-CHECK-IF-CLEAN?
and REPAIR fields.
(file-system->spec, spec->file-system): Adjust accordingly.
* gnu/build/linux-boot.scm (mount-root-file-system): Take new
SKIP-CHECK-IF-CLEAN? and REPAIR keyword arguments. Thread them through
to CHECK-FILE-SYSTEM.
* doc/guix.texi (File Systems): Document both new <file-system> options.
This broke compilation of Guix with guile@3.0.2 with:
In procedure make-regexp: Invalid range end
The fix is to replace [0-9A-f] with [0-9A-Fa-f].
* gnu/build/jami-service.scm (account-fingerprint-rx): Correct regexp.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
New record <setuid-program> with fields for setting the specific user
and group, as well as specifically selecting the setuid and setgid bits,
for a program within the setuid-program-service.
* gnu/services.scm (setuid-program-file-like-deprecated): New function.
(setuid-program-service-type): Make use of
setuid-program->activation-gexp. Adjust the extend property to handle
<setuid-program>.
* gnu/build/activation.scm (activate-setuid-programs): Update to expect a
<setuid-record> list for each program entry.
* gnu/system.scm: (operating-system-setuid-programs): Renamed to
%operating-system-setuid-programs and replace it with new procedure.
(operating-system-default-essential-services,
hurd-default-essential-services): Replace
operating-system-setuid-programs with
%operating-system-setuid-programs.
* gnu/system/setuid.scm: New file.
* doc/guix.texi (Setuid Programs): Document <setuid-program>.
Co-authored-by: Brice Waegeneire <brice@waegenei.re>
This broke compilation of Guix with guile@3.0.2 with:
In procedure make-regexp: Invalid range end
The fix is to replace [0-9A-f] with [0-9A-Fa-f].
* gnu/build/jami-service.scm (account-fingerprint-rx): Correct regexp.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
This reverts commit 4673f81793, which reverted
commit 69dcc24c9f with the fix detailed below.
Thanks to Christopher Baines for reporting the failure and proposing a fix.
* guix/self.scm (compiled-guix) [*system-test-modules*]: Add the test data
files via the 'extra-files' argument.
* gnu/local.mk (dist_patch_DATA): Move the tests/data/jami-dummy-account.dat
file to...
* gnu/local.mk (MODULES_NOT_COMPILED): ... here.
* gnu/services/telephony.scm (string-or-computed-file?)
(string-list?, account-fingerprint-list?): New procedures.
(maybe-string-list, maybe-account-fingerprint-list)
(maybe-boolean, maybe-string, jami-account-list): New configuration field
types.
(serialize-string-list, serialize-boolean, serialize-string)
(jami-account, jami-account->alist, jami-configuration)
(jami-account-list?, jami-account-list-maybe): New procedures.
(%jami-accounts): New variable.
(jami-configuration->command-line-arguments): New procedure.
(jami-dbus-session-activation, jami-shepherd-services): New procedures.
(jami-service-type): New variable.
* gnu/build/jami-service.scm: New file.
* gnu/tests/data/jami-dummy-account.dat: Likewise.
* gnu/tests/telephony.scm: Likewise.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register them.
* Makefile.am (SCM_TESTS): Register the test file.
(dist_patch_DATA): Register the new data file.
* doc/guix.texi (Telephony Services): Document it.
Instead of imperative module-autoload! directives.
* gnu/build/shepherd.scm: Replace module-autoload! directives by autoload
arguments for define-module.
Note: this merge actually changes the 'curl' and 'python-attrs' derivations,
as part of solving caf4a7a277 and
12964df69a respectively.
4604d43c0e (gnu: gnutls@3.6.16: Fix cross-compilation.) was ignored because it
cannot currently be tested.
Conflicts:
gnu/local.mk
gnu/packages/aidc.scm
gnu/packages/boost.scm
gnu/packages/curl.scm
gnu/packages/nettle.scm
gnu/packages/networking.scm
gnu/packages/python-xyz.scm
gnu/packages/tls.scm
* gnu/build/linux-boot.scm (mount-root-file-system): Take a new #:CHECK?
keyword argument. Add it to the docstring. Conditionally call
CHECK-FILE-SYSTEM.
(boot-system): Adjust its only caller to pass the <file-system>'s CHECK?
option through, if available.
Previously, (read-partition-uuid "/does/not/exist") would return #f.
With this change, a 'system-error exception is raised as expected.
* gnu/build/file-systems.scm (ENOENT-safe): Clarify docstring.
(partition-field-reader): Remove use of 'ENOENT-safe'.
(partition-predicate): Wrap READER in 'ENOENT-safe'.
Fixes <https://bugs.gnu.org/47584>.
* gnu/build/activation.scm (copy-account-skeletons): Do not chown the
home directory; leave this to 'activate-user-home'.
(activate-user-home): Only chown the home directory after the account
skeletons have been copied.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>.
Fixes <https://bugs.gnu.org/47007>.
Reported by Jelle Licht <jlicht@fsfe.org>.
Since commit dcb640f02b, we could end up
applying the wrong mount flags because the (find ...) expression could
pick the "wrong" mount point in the presence of bind mounts.
* gnu/build/file-systems.scm (mount-file-system): Use 'statfs' to
compute FLAGS whe FS is a bind mount.
This addresses a potential security issue, where a compromised
service could trick the activation code in changing the permissions,
owner and group of arbitrary files. However, this patch is
currently only a partial fix, due to a TOCTTOU (time-of-check to
time-of-use) race, which can be fixed once guile has bindings
to openat and friends.
Fixes: <https://lists.gnu.org/archive/html/guix-devel/2021-01/msg00388.html>
* gnu/build/activation.scm: new procedure 'mkdir-p/perms'.
* gnu/services/authentication.scm
(%nslcd-activation, nslcd-service-type): use new procedure.
* gnu/services/cups.scm (%cups-activation): likewise.
* gnu/services/dbus.scm (dbus-activation): likewise.
* gnu/services/dns.scm (knot-activation): likewise.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Fixes <https://bugs.gnu.org/46395>.
Reported by Duncan Overbruck <mail@duncano.de>.
* gnu/build/activation.scm (activate-setuid-programs): Change TARGET
mode to not be setgid.
It is now up to the caller to deduplicate store contents.
* guix/store/database.scm (register-items): Remove #:deduplicate?
parameter and call to 'deduplicate'.
(register-path): Call 'deduplicate' when #:deduplicate? is true.
* gnu/build/image.scm (register-closure): Adjust call accordingly.
* gnu/build/vm.scm (register-closure): Likewise.
* guix/nar.scm (finalize-store-file): Likewise.
* guix/scripts/pack.scm (store-database): Likewise.
Until now deduplication was performed as an additional pass after
copying files, which involve re-traversing all the files that had just
been copied.
* guix/store/deduplication.scm (copy-file/deduplicate): New procedure.
* tests/store-deduplication.scm ("copy-file/deduplicate"): New test.
* guix/build/store-copy.scm (populate-store): Add #:deduplicate?
parameter and honor it.
* tests/gexp.scm ("gexp->derivation, store copy"): Pass #:deduplicate? #f
to 'populate-store'.
* gnu/build/image.scm (initialize-root-partition): Pass #:deduplicate?
to 'populate-store'. Pass #:deduplicate? #f to 'register-closure'.
* gnu/build/vm.scm (root-partition-initializer): Likewise.
* gnu/build/install.scm (populate-single-profile-directory): Pass
#:deduplicate? #f to 'populate-store'.
* gnu/build/linux-initrd.scm (build-initrd): Likewise.
* guix/scripts/pack.scm (self-contained-tarball)[import-module?]: New
procedure.
[build]: Pass it as an argument to 'source-module-closure'.
* guix/scripts/pack.scm (squashfs-image)[build]: Wrap in
'with-extensions'.
* gnu/system/linux-initrd.scm (expression->initrd)[import-module?]: New
procedure.
[builder]: Pass it to 'source-module-closure'.
* gnu/system/install.scm (cow-store-service-type)[import-module?]: New
procedure. Pass it to 'source-module-closure'.
The assumption now is that the caller took care of resetting timestamps
and permissions.
* guix/store/database.scm (register-items): Remove #:reset-timestamps?
parameter and the call to 'reset-timestamps'.
(register-path): Adjust accordingly and add call to 'reset-timestamps'.
* gnu/build/image.scm (register-closure): Remove #:reset-timestamps?
parameter to 'register-items'.
* gnu/build/vm.scm (register-closure): Likewise.
* guix/nar.scm (finalize-store-file): Adjust accordingly.
* guix/scripts/pack.scm (store-database)[build]: Likewise.
Until now, 'populate-store' would reset permissions but not timestamps,
so callers would resort to going through an extra directory traversal to
reset timestamps.
* guix/build/store-copy.scm (reset-permissions): Remove.
(copy-recursively): New procedure.
(populate-store): Pass #:keep-permissions? to 'copy-recursively'.
Remove call to 'reset-permissions'.
* tests/gexp.scm ("gexp->derivation, store copy"): In BUILD-DRV, check
whether 'populate-store' canonicalizes permissions and timestamps.
* gnu/build/image.scm (initialize-root-partition): Pass #:reset-timestamps? #f
to 'register-closure'.
* gnu/build/vm.scm (root-partition-initializer): Likewise.
This broke 'guix environment --container' on non-Debian distributions.
Fixes <https://bugs.gnu.org/45066>. Reported by luhux <luhux@outlook.com>.
This reverts commit 8bc5ca5160.
Bit 1 means the target device was mounted read-only whilst checking.
This should never happen in an initrd context but is not an error.
* gnu/build/file-systems.scm (check-bcachefs-file-system): Ignore status
bits that don't signal an error. Remove the 'reboot-required case.
Fixes <https://bugs.gnu.org/31977>.
Reported by Paul Garlick <pgarlick@tourbillion-technology.com>.
* gnu/build/linux-container.scm (unprivileged-user-namespace-supported?):
Return #f when the 'userns-file' does not exist.
