* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (%qemu-static-networking): New variable.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
* gnu/system/vm.scm (common-qemu-options): Remove the "-vga std" argument that
is the default since QEMU 2.2.
Suggested-by: Attila Lendvai <attila@lendvai.name>
It configures QEMU to use the tty it was started in for IO (as opposed to
opening a separate graphical window). This enables copy-pasting and
scrollback. Exit QEMU with C-a x.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Also add the
'-nographic' QEMU argument when called with #:graphic? #false.
* guix/scripts/system.scm (system-derivation-for-action): Propagate
the #:graphic? keyword arg.
(perform-action): Add and propagate the #:graphic? keyword arg.
(show-help): Add --no-graphic CLI arg.
(%options): Process the new --no-graphic CLI arg.
(process-action): Feed in the CLI arg through the #:graphic? keyword arg.
* doc/guix.texi (Invoking guix system): Add example to combine guix system and
invoking the vm start script into one command. Split the description of the
various options into separate paragraphs. Add a paragraph to describe
--no-graphic.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Fixes <https://issues.guix.gnu.org/51425>.
Reported by Jonathan Brielmaier <jonathan.brielmaier@web.de>.
* gnu/system/file-systems.scm (invalid-file-system-flags)
(%validate-file-system-flags): New procedures.
(validate-file-system-flags): New macro.
(<file-system>)[flags]: Add 'sanitize' property.
Fixes regression introduced in d5073fd113,
whereby childhurd dependencies such as 'hurd' would erroneously be
attempted to build natively on x86_64-linux.
* gnu/system/images/hurd.scm (hurd-disk-image)[platform]: New field.
Let this be a warning against—even cautiously and deliberately—using
double negatives. You shall stare, but you shall not see.
* gnu/system/file-systems.scm (<file-system>): Fix the default
skip-check-if-clean? value to match the documentation and the intention.
It was never guaranteed to be run for non-root file systems. It was for
root file systems only due to a bug now fixed.
* gnu/build/file-systems.scm (check-btrfs-file-system): Don't invoke
‘btrfs device scan’ here.
* gnu/system/linux-initrd.scm (raw-initrd): Do so here if any btrfs file
systems are present.
* gnu/build/file-systems.scm (check-ext2-file-system)
(check-bcachefs-file-system, check-btrfs-file-system)
(check-fat-file-system, check-jfs-file-system, check-f2fs-file-system)
(check-ntfs-file-system, check-file-system): Take and honour new FORCE?
and REPAIR arguments. Update the docstring. Adjust all callers.
* gnu/system/file-systems.scm <file-system>: Add new SKIP-CHECK-IF-CLEAN?
and REPAIR fields.
(file-system->spec, spec->file-system): Adjust accordingly.
* gnu/build/linux-boot.scm (mount-root-file-system): Take new
SKIP-CHECK-IF-CLEAN? and REPAIR keyword arguments. Thread them through
to CHECK-FILE-SYSTEM.
* doc/guix.texi (File Systems): Document both new <file-system> options.
* gnu/system/pam.scm (unix-pam-service): Add account and session PAM entries
for pam-gnupg. Don't pass "#f" to "allow-root?" argument, because "lambda*"
already does this by default.
* doc/guix.texi (X Window): Document this.
* gnu/services/xorg.scm (<slim-configuration>)[gnupg?]: New record field.
(slim-pam-service): Pass "#:gnupg?" argument to "unix-pam-service".
This is a followup to a7ac19851b.
* gnu/system/install.scm (installation-os)[setuid-programs]: Use
'setuid-program'.
* gnu/system/hurd.scm (%setuid-programs/hurd): Use 'file-like->setuid-program'.
Thanks to Guillem Jover <guillem@debian.org> on the OFTC's #debian-dpkg
channel for helping with troubleshooting.
Letting GNU Tar recursively walk the complete files hierarchy side-steps the
risks associated with providing a list of file names:
1. Duplicated files in the archive (recorded as hard links by GNU Tar)
2. Missing parent directories.
The above would cause dpkg to malfunction, for example by aborting early and
skipping triggers when there were missing parent directories.
* guix/scripts/pack.scm (self-contained-tarball/builder): Do not call
POPULATE-SINGLE-PROFILE-DIRECTORY, which creates extraneous files such as
/root. Instead, call POPULATE-STORE and INSTALL-DATABASE-AND-GC-ROOTS
individually to more precisely generate the file system. Replace the list of
files by the current directory, "." and streamline the way options are passed.
* gnu/system/file-systems.scm (reduce-directories): Remove procedure.
* tests/file-systems.scm ("reduce-directories"): Remove test.
Tar translate duplicate files in the archive into hard links. These can cause
problems, as not every tool support them; for example dpkg doesn't.
* gnu/system/file-systems.scm (reduce-directories): New procedure.
(file-prefix?): Lift the restriction on file prefix. The procedure can be
useful for comparing relative file names. Adjust doc.
(file-name-depth): New procedure, extracted from ...
(btrfs-store-subvolume-file-name): ... here.
* guix/scripts/pack.scm (self-contained-tarball/builder): Use
reduce-directories.
* tests/file-systems.scm ("reduce-directories"): New test.
Inspired by
1270b2e209.
The price to pay is about 5% of a CPU core usage in the guest in the worst
scenario.
* gnu/system/examples/vm-image.tmpl
(auto-update-resolution-crutch): New mcron job.
[services]: Extend the mcron-service with it.
Having 2.29 is most likely no longer justified. Removing it reduces the
closure size returned by:
guix size $(guix system build gnu/system/install.scm)
from 1.6G to 1.5G.
* gnu/system/locale.scm (%default-locale-libcs): Remove GLIBC-2.29.
Fixes <https://issues.guix.gnu.org/47225>.
* gnu/system/vm.scm (%default-msize-value): New variable.
(%linux-vm-file-systems): Use it as the value of the msize option.
(mapping->file-system): Likewise.
Reported-by: Leo Famulari <leo@famulari.name>
Some services require networking, I'm looking at the Guix Build Coordinator
agent. Networking seems to work in the childhurd VM, so I think this change
makes sense.
* gnu/system/hurd.scm (%base-services/hurd): Add 'networking to the provision
parameter for the static-networking service.
Remove the 'vm-image' command that has been superseded by the 'image'
command.
* gnu/system/vm.scm (system-qemu-image): Remove it.
* guix/scripts/system.scm (system-derivation-for-action): Mark 'vm-image'
command as deprecated and use the image API to produce the VM image.
(perform-action, show-help): Adapt accordingly.
* tests/guix-system.sh: Ditto.
* doc/guix.texi (Invoking guix system,
Running Guix in a VM): Ditto.
* etc/completion/fish/guix.fish: Ditto.
* etc/completion/zsh/_guix: Ditto.
* gnu/system/shadow.scm (account-activation): Delete duplicate (eq?) users
and groups before transforming them to specs and asserting, that names are
unique.
The change from formatted message causes the line to no longer automatically
be ended. This will need to be reverted once again, when duplicate names
become hard errors.
* gnu/system/shadow.scm (assert-unique-account-names)
(assert-unique-group-names): End format strings in ~%.
