Bit 1 means the target device was mounted read-only whilst checking.
This should never happen in an initrd context but is not an error.
* gnu/build/file-systems.scm (check-bcachefs-file-system): Ignore status
bits that don't signal an error. Remove the 'reboot-required case.
* gnu/system/file-systems.scm (<file-system>): Add a mount-may-fail? field.
(file-system->spec): adapt accordingly,
(spec->file-system): ditto.
* gnu/build/file-systems.scm (mount-file-system): If 'system-error is raised
and mount-may-fail? is true, ignore it. Otherwise, re-raise the exception.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
The --root option can now be omitted, and inferred from the root file system
declaration instead.
* gnu/build/file-systems.scm (canonicalize-device-spec): Extend to support NFS
directly, and...
* gnu/build/linux-boot.scm (boot-system): ...remove NFS special casing from
here. Remove nested definitions for root-fs-type, root-fs-flags and
root-fs-options, and bind those inside the let* instead. Make "--root" take
precedence over the device field string representation of the root file
system.
* doc/guix.texi (Initial RAM Disk): Document that "--root" can be left
unspecified.
Follow-up to 23b37c3d40.
* gnu/build/file-systems.scm (bytevector-utf16-length): New procedure.
(null-terminated-utf16->string): New procedure.
(f2fs-superblock-volume-name): Use it.
* guix/build/syscalls.scm (MS_LAZYTIME): New variable.
* gnu/build/file-systems.scm (mount-flags->bit-mask): Add match rules for
'strict-atime' and 'lazy-time'.
* doc/guix.texi (File Systems): Add 'strict-atime' and 'lazy-time' to the list
of supported flags.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/build/file-systems.scm (mount-file-system): Clean the documentation from
the no longer existing parameters (these are now encapsulated within a
<file-system> record).
* guix/build/syscalls.scm (MS_NOATIME): New variable.
* gnu/build/file-systems.scm (mount-flags->bit-mask): Support it.
* doc/guix.texi (File Systems): Document it and add cross-references to
the relevant documentation.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
Add a specific procedure to read luks partition uuid.
* gnu/build/file-systems.scm (luks-partition-field-reader): New procedure ...
(luks-partition-uuid-predicate): ... used here,
(read-luks-partition-uuid): new exported procedure.
This fixes a bug whereby all emergency REPL output would go to /dev/klog
and thus, each line would be prefixed by "[12324.432] shepherd[1]: ".
* gnu/build/file-systems.scm (check-file-system): Wrap 'start-repl' call
in 'with-output-to-file'.
Fixes <https://bugs.gnu.org/23697>.
Reported by Jan Nieuwenhuizen <janneke@gnu.org>.
* gnu/build/file-systems.scm (check-file-system): Call 'start-repl' only
if current-input-port passes 'isatty?'.
* gnu/services/shepherd.scm (shepherd-configuration-file): After
'for-each' expression, call 'redirect-port'.
* gnu/tests/base.scm (run-basic-test)["stdin is /dev/null"]: New test.
Previously, 'canonicalize-device-spec' would wait for devices when they
were specified as a label or UUID, but would not wait when the user
passed a "/dev" file name directly. This could cause problems when
the /dev node takes a while to show up.
* gnu/build/file-systems.scm (canonicalize-device-spec): Add 'resolve'
call in the 'string?' case.
The 'title' field was easily overlooked and was an endless source of
confusion. Now, the value of the 'device' field is self-contained.
* gnu/system/file-systems.scm (<file-system>): Change constructor name
to '%file-system'.
[title]: Remove.
(<file-system-label>): New record type with printer.
(report-deprecation, device-expression)
(process-file-system-declaration, file-system): New macros.
(file-system-title): New procedure.
(file-system->spec, spec->file-system): Adjust to handle
<file-system-label>.
* gnu/system.scm (bootable-kernel-arguments): Add case for
'file-system-label?'.
(read-boot-parameters): Likewise.
(mapped-device-user): Avoid 'file-system-title'.
(fs->boot-device): Remove.
(operating-system-boot-parameters): Use 'file-system-device' instead of
'fs->boot-device'.
(device->sexp): Add case for 'file-system-label?'.
* gnu/bootloader/grub.scm (grub-root-search): Add case for
'file-system-label?'.
* gnu/system/examples/bare-bones.tmpl,
gnu/system/examples/beaglebone-black.tmpl,
gnu/system/examples/lightweight-desktop.tmpl,
gnu/system/examples/vm-image.tmpl: Remove uses of 'title'.
* gnu/system/vm.scm (virtualized-operating-system): Remove uses of
'file-system-title'.
* guix/scripts/system.scm (check-file-system-availability): Likewise,
and adjust fix-it hint.
(check-initrd-modules)[file-system-/dev]: Likewise.
* gnu/build/file-systems.scm (canonicalize-device-spec): Remove 'title'
parameter.
[canonical-title]: Remove.
Match on SPEC's type rather than on CANONICAL-TITLE.
(mount-file-system): Adjust caller.
* gnu/build/linux-boot.scm (boot-system): Interpret ROOT here.
* gnu/services/base.scm (file-system->fstab-entry): Remove use of
'file-system-title'.
* doc/guix.texi (File Systems): Remove documentation of the 'title'
field. Rewrite documentation of 'device' and document
'file-system-label'.
Reported by Roel Janssen <roel@gnu.org>
at <https://lists.gnu.org/archive/html/help-guix/2017-09/msg00094.html>.
* gnu/system/file-systems.scm (file-system->spec): When DEVICE is a
UUID, serialize it in a way that preserves its type.
(spec->file-system): Adjust accordingly.
* gnu/build/file-systems.scm (canonicalize-device-spec): Add case for
when SPEC is 'uuid?'.
* gnu/build/file-systems.scm (mount-file-system): Rename 'spec' to 'fs'
and assume it's a <file-system>.
* gnu/build/linux-boot.scm (boot-system): Assume MOUNTS is a list of
<file-system> and adjust accordingly.
* gnu/build/linux-container.scm (mount-file-systems): Remove
'file-system->spec' call.
* gnu/services/base.scm (file-system-shepherd-service): Add
'spec->file-system' call. Add (gnu system file-systems) to 'modules'.
* gnu/system/linux-initrd.scm (raw-initrd): Use (gnu system
file-systems). Add 'spec->file-system' call for #:mounts.
* gnu/system/uuid.scm (uuid=?): New procedure.
* tests/uuid.scm ("uuid=?"): New test.
* gnu/build/file-systems.scm (partition-uuid-predicate)
(luks-partition-uuid-predicate): Use it instead of 'bytevector=?'.
Trying to boot GuixSD when an audio CD is in the drive will die with an
"input/output error" when trying to read the superblock from the cd
drive.
This patch catches and warns in this case rather than dying.
* gnu/build/file-systems.scm (ENOENT-safe): Handle EIO.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Previously a named socket such as /dev/log would fail
the 'regular-file?' test and we'd end up mkdir'ing it.
* gnu/build/file-systems.scm (regular-file?): Remove.
(mount-file-system): Change (regular-file? source)
to (not (file-is-directory? source)).
Fixes <http://bugs.gnu.org/25573>.
Reported by Alex Kost <alezost@gmail.com>.
* gnu/build/file-systems.scm (seek*): New procedure.
(read-superblock): Use it instead of 'seek' and ensure it returns
OFFSET.
* gnu/build/file-systems.scm (read-superblock,
null-terminated-latin1->string): New variables.
(sub-bytevector): Move to general section.
(ext2-superblock?, read-ext2-superblock): New variables.
(ext2-superblock-uuid, ext2-superblock-volume-name): Use
sub-bytevector and null-terminated-latin1->string.
(%ext2-sblock-magic, %ext2-sblock-creator-os, %ext2-sblock-uuid,
%ext2-sblock-volume-name): Inline constants.
(luks-superblock?, read-luks-header): New variables.
(%luks-header-size, %luks-magic): Inline.
(partition-label-predicate, partition-uuid-predicate,
luks-partition-uuid-predicate): Use new functions.
