* guix/scripts/package.scm (list-installed): New procedure.
* guix/scripts/home.scm (%options, show-help): Add '--list-installed'.
(process-command): For 'describe' and 'list-generations', honor the
'list-installed option.
(display-home-environment-generation): Add #:list-installed-regex and
honor it.
(list-generations): Likewise.
* guix/scripts/utils.scm (pretty-print-table): New argument "left-pad".
* doc/guix.texi (Invoking Guix Home): Add information and example for
--list-installed flag.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
Fixes <https://issues.guix.gnu.org/56114>.
Reported by Maxime Devos <maximedevos@telenet.be>.
* guix/monad-repl.scm (%build-verbosity): New variable.
(evaluate/print-with-store): New procedure.
(run-in-store): Rewrite in terms of 'evaluate/print-with-store'.
(verbosity, lower, build): New meta-commands.
* doc/guix.texi (Using Guix Interactively): New node.
(The Store Monad): Link to it.
(Invoking guix repl): Likewise.
* doc/contributing.texi (Running Guix Before It Is Installed): Refer to
it.
(The Perfect Setup): Suggest 'guix install' rather than 'guix package -i'.
Partially fixes <https://issues.guix.gnu.org/55821>. Partially because our
git package doesn't yet include the documentation. This change will need to
go to core-updates.
* doc/contributing.texi (Submitting Patches): Adjust the node name.
* doc/guix-cookbook.texi (A Scheme Crash Course): Suggest 'guix shell'
instead of 'guix environment'.
(Customizing the Kernel, The benefits of manifests): Likewise.
* doc/guix.texi (Build Systems): Replace paragraph about RUNPATH
validation with a cross-reference.
(Build Phases): Add 'validate-runpath' phase, with the paragraph taken
above.
Previously, 'guix challenge' without arguments would list live store
items that had been locally built. This was deemed confusing,
especially since 'list-live' is an expensive operation.
* guix/scripts/challenge.scm (guix-challenge): Warn and exit with 0 when
FILES is empty.
* doc/guix.texi (Invoking guix challenge): Update accordingly.
I'm looking at this as I'd like to use the keepalive functionality.
* gnu/services/web.scm (nginx-upstream-configuration-extra-content): New
procedure.
(emit-nginx-upstream-config): Include the extra-content if applicable.
* doc/guix.texi (NGINX): Document this.
* gnu/services/guix.scm (guix-build-coordinator-configuration-parallel-hooks):
New procedure.
(make-guix-build-coordinator-start-script): Accept and use #:parallel-hooks.
(guix-build-coordinator-shepherd-services): Pass parallel-hooks to
make-guix-build-coordinator-start-script.
* doc/guix.texi (Guix Build Coordinator): Document this new field.
Now that configuration records use the 'sanitize' property for each
field, 'validate-configuration' has become useless because it's
impossible to construct an invalid configuration record.
* gnu/services/configuration.scm (validate-configuration): Remove.
* gnu/services/mail.scm (dovecot-service): Remove call.
* gnu/services/vpn.scm (openvpn-client-service)
(openvpn-server-service): Likewise.
* doc/guix.texi (Complex Configurations): Remove documentation.
This incompatible change fixes an inconsistency with other commands
where '-L' is short for '--load-path'.
* guix/scripts/refresh.scm (%options): Add --load-path option from
%STANDARD-BUILD-OPTIONS. Remove #\L shortcut for --list-updaters, and
remove --load-path option that lacked the #\L shortcut.
(show-help): Update accordingly.
* doc/guix.texi (Invoking guix refresh): Update accordingly.
* gnu/home/services/ssh.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* doc/guix.texi (Secure Shell): New section.
* gnu/services/desktop.scm (seatd-service-type): New variable
* gnu/services/desktop.scm (seatd-configuration): New data type
Signed-off-by: Lars-Dominik Braun <ldb@leibniz-psychology.org>
* gnu/services/base.scm (greetd-service-type): New variable
* gnu/services/base.scm (greetd-configuration): New data type
* gnu/services/base.scm (greetd-terminal-configuration): New data type
* gnu/services/base.scm (greetd-agreety-session): New data type
* gnu/services/base.scm (pam-limits-service-type): Should be aware of
greetd PAM service
* gnu/services/pam-mount.scm (pam-mount-pam-service): Should be aware
of greetd PAM service
Signed-off-by: Lars-Dominik Braun <ldb@leibniz-psychology.org>
hex.pm is a package repository for Erlang and Elixir.
* guix/scripts/import.scm (importers): Add "hexpm".
* guix/scripts/import/hexpm.scm, guix/import/hexpm.scm,
guix/hexpm-download.scm: New files.
* guix/import/utils.scm (source-spec->object): Add "hexpm-fetch" to list of
fetch methods.
* guix/upstream.scm (package-update/hexpm-fetch): New function.
(%method-updates) Add it.
* Makefile.am: Add them.
* doc/guix.texi (Networking Services)
(Messaging Services)
(Telephony Services)
(File-Sharing Services)
(VPN Services)
(Power Management Services)
(Complex Configurations)
(Desktop Home Services): Remove mentions of the 'disabled symbol or
replace them by *unspecified*, depending on context.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/dbus.scm (<dbus-configuration>)[verbose?]: New field.
(dbus-shepherd-service): Use it.
(dbus-service)[verbose?]: Add argument and update doc.
* doc/guix.texi (Desktop Services): Document it.
Fixes <https://issues.guix.gnu.org/54783>.
* gnu/services/linux.scm (zram-device-configuration)
[priority]: Adapt to use #f or an integer from 0 to 32767. Add sanitizer to
warn for the change and delay the field.
(zram-device-configuration->udev-string): Adapt as above.
* doc/guix.texi (Zram Device Service): Remove double copyright line.
Change priority description to refer to the Swap Space one, and suggest not
leaving the default #f on to properly use zram.
Reported-by: Stefan Baums <baums@stefanbaums.com>
Modified-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami'
and 'jami-provisioning' system tests to pass again.
In version 0.9.0, Shepherd constructors are now run concurrently, via
cooperative scheduling (Guile Fibers). The Jami service previously relied on
blocking sleeps while polling for D-Bus services to become ready after forking
a process; this wouldn't work anymore since while blocking the service process
wouldn't be given the chance to finish starting. The new reliance on Fibers
in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant
that it wouldn't work outside of Shepherd anymore. Finally, the
'start-service' Shepherd procedure used in the test suite would cause the Jami
daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0).
To fix/simplify these problems, this change does the following:
1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify
things, such as avoiding the need to fork 'dbus-send' processes.
2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries'
waiting syntax.
3. A 'dbus' package variant is used to adjust the session bus configuration,
tailoring it for the use case at hand.
4. Avoid start-service in the tests, preferring 'jami-service-available?' for
now.
* gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes)
(deserialize-item, serialize-boolean, dbus-dict->alist)
(dbus-array->list, parse-account-ids, parse-account-details)
(parse-contacts): Delete procedures.
(%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group)
(%send-dbus-debug): Delete parameters.
(jami-service-running?): New procedure.
(send-dbus/configuration-manager): Rename to...
(call-configuration-manager-method): ... this. Turn METHOD into a positional
argument. Turn ARGUMENTS into an optional argument. Invoke
`call-dbus-method' instead of `send-dbus', adjusting callers accordingly.
(get-account-ids, id->account-details, id->account-details)
(id->volatile-account-details, username->id, add-account remove-account)
(username->contacts, remove-contact, add-contact, set-account-details)
(set-all-moderators, username->all-moderators?, username->moderators)
(set-moderator): Adjust accordingly.
(with-retries, send-dbus, dbus-available-services)
(dbus-service-available?): Move to ...
* gnu/build/dbus-service.scm: ... this new module.
(send-dbus): Rewrite to use the Guile AC/D-Bus library.
(%dbus-query-timeout, sleep*): New variables.
(%current-dbus-connection): New parameter.
(initialize-dbus-connection!, argument->signature-type)
(call-dbus-method): New procedures.
(dbus-available-services): Adjust accordingly.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register new module.
* gnu/packages/glib.scm (dbus-for-jami): New variable.
* gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to
dbus-for-jami.
(jami-dbus-session-activation): Write a D-Bus daemon configuration file at
'/var/run/jami/session-local.conf'.
(jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers
as extensions. Adjust imported modules. Remove no longer used parameters.
<jami-dbus-session>: Use a PID file, avoiding the need for the manual
synchronization.
<jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using
'jami-service-available?' instead of 'dbus-service-available?'.
* gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set
DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use
'jami-service-available?' to determine if the service is started rather than
the now problematic Shepherd's 'start-service'.
* doc/he-config-bare-bones.scm: Adujst example according to changes in
bash-service-type and home-files-service-type.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
For single-disk installs (external USBs) and for amnesiac UEFIs, Guix is not
found using its default Grub EFI bootloader location of
/boot/efi/EFI/Guix/grubx64.efi means the Guix install will not be found.
To handle this, we can place the bootloader file in the UEFI specification
location, overwriting any other OS that may have placed a file there. This
location is namely /boot/efi/EFI/BOOT/BOOTX64.efi. Grub has explicit support
for this location/situation with the `--removable` flag.
* gnu/bootloader/grub.scm (install-grub-efi-removable)
(grub-efi-removable-bootloader): New variables.
* doc/guix.texi (Bootloader Configuration): Document it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Follow up of beaf701d65.
* doc/guix.texi: Replace the shell old-style command substitution with
the new-style one.
Signed-off-by: Julien Lepiller <julien@lepiller.eu>
