With the default limit of 512 MB the test sometimes fails, in different
ways. Fixes https://issues.guix.gnu.org/55206.
* gnu/tests/ldap.scm (run-ldap-test): Increase memory size to 1024 MiB.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
The tests would otherwise fail on an old desktop.
* gnu/tests/docker.scm (run-docker-test)
<make-marionette>: Specify a timeout of 60 s.
(run-docker-system-test) <make-marionette>: Likewise.
This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami'
and 'jami-provisioning' system tests to pass again.
In version 0.9.0, Shepherd constructors are now run concurrently, via
cooperative scheduling (Guile Fibers). The Jami service previously relied on
blocking sleeps while polling for D-Bus services to become ready after forking
a process; this wouldn't work anymore since while blocking the service process
wouldn't be given the chance to finish starting. The new reliance on Fibers
in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant
that it wouldn't work outside of Shepherd anymore. Finally, the
'start-service' Shepherd procedure used in the test suite would cause the Jami
daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0).
To fix/simplify these problems, this change does the following:
1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify
things, such as avoiding the need to fork 'dbus-send' processes.
2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries'
waiting syntax.
3. A 'dbus' package variant is used to adjust the session bus configuration,
tailoring it for the use case at hand.
4. Avoid start-service in the tests, preferring 'jami-service-available?' for
now.
* gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes)
(deserialize-item, serialize-boolean, dbus-dict->alist)
(dbus-array->list, parse-account-ids, parse-account-details)
(parse-contacts): Delete procedures.
(%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group)
(%send-dbus-debug): Delete parameters.
(jami-service-running?): New procedure.
(send-dbus/configuration-manager): Rename to...
(call-configuration-manager-method): ... this. Turn METHOD into a positional
argument. Turn ARGUMENTS into an optional argument. Invoke
`call-dbus-method' instead of `send-dbus', adjusting callers accordingly.
(get-account-ids, id->account-details, id->account-details)
(id->volatile-account-details, username->id, add-account remove-account)
(username->contacts, remove-contact, add-contact, set-account-details)
(set-all-moderators, username->all-moderators?, username->moderators)
(set-moderator): Adjust accordingly.
(with-retries, send-dbus, dbus-available-services)
(dbus-service-available?): Move to ...
* gnu/build/dbus-service.scm: ... this new module.
(send-dbus): Rewrite to use the Guile AC/D-Bus library.
(%dbus-query-timeout, sleep*): New variables.
(%current-dbus-connection): New parameter.
(initialize-dbus-connection!, argument->signature-type)
(call-dbus-method): New procedures.
(dbus-available-services): Adjust accordingly.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register new module.
* gnu/packages/glib.scm (dbus-for-jami): New variable.
* gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to
dbus-for-jami.
(jami-dbus-session-activation): Write a D-Bus daemon configuration file at
'/var/run/jami/session-local.conf'.
(jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers
as extensions. Adjust imported modules. Remove no longer used parameters.
<jami-dbus-session>: Use a PID file, avoiding the need for the manual
synchronization.
<jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using
'jami-service-available?' instead of 'dbus-service-available?'.
* gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set
DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use
'jami-service-available?' to determine if the service is started rather than
the now problematic Shepherd's 'start-service'.
* gnu/tests/virtualization.scm (run-childhurd-test)[run-uname-over-ssh]:
Rename to...
[run-command-over-ssh]: ... this. Add 'command' parameter and honor it.
["SSH up and running"]: Adjust accordingly.
Fixes <https://issues.guix.gnu.org/55335>.
Reported by Christopher Baines <mail@cbaines.net>.
* gnu/services/ssh.scm (openssh-shepherd-service)[inetd-style?]: New variable.
<start>: Use it. When using 'make-inetd-constructor', pass a list of
endpoints as is possible with the Shepherd 0.9.1.
<stop>: Adjust accordingly.
* gnu/tests/ssh.scm (run-ssh-test)["wait for port 22"]: Rename to...
["wait for port 22, IPv4"]: ... this.
["wait for port 22, IPv6"]: New test.
* gnu/services/messaging.scm (bitlbee-shepherd-service): Add call to
'least-authority-wrapper'. In 'start' method, use
'make-inetd-constructor' when available.
* gnu/tests/messaging.scm (run-bitlbee-test)["valid PID"]: Remove test.
This is a follow-up of 73eeeeafbb.
* gnu/tests/web.scm (run-tailon-test): Wait for the TCP port 8080 instead of
relying on start-service.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Fixes a regression introduced in the Shepherd 0.9.0 whereby clients can
start a service that is already being started, leading to two instances
of the process (and usually failure of the second attempt to start it).
Partly fixes <https://issues.guix.gnu.org/54786>.
Reported by Mathieu Othacehe.
* gnu/tests/version-control.scm (run-cgit-test)
["nginx running", "fcgiwrap running"]: Wail for a file/TCP port instead
of starting the service.
(run-git-http-test)["nginx running"]: Likewise.
(run-gitile-test)["nginx running"]: Likewise.
* gnu/services/ssh.scm (openssh-shepherd-service): Use
'make-inetd-constructor' when it is defined.
(<openssh-configuration>)[max-connections]: New field.
* gnu/tests/ssh.scm (run-ssh-test)["sshd PID"]: Adjust to cope with
PID-FILE being #f.
* gnu/tests/ssh.scm (%test-openssh): Pass #f as the 'pid-file'
argument.
* doc/guix.texi (Networking Services): Document 'max-connections'.
* gnu/tests/install.scm (run-install)[packages]: Unconditionally add to OS.
[NUMBER-OF-DISKS]: Add argument, update doc and adjust. The returned gexp
output is now a list of images rather than the image itself.
* gnu/tests/install.scm (qemu-command*): Rename IMAGE argument to IMAGES, to
account for the above change. Adjust doc. Generate a QEMU '-drive' argument
for each disk image.
(%test-installed-os): Rename the IMAGE variable to IMAGES.
(%test-installed-extlinux-os): Likewise.
(%test-iso-image-installer): Likewise.
(%test-separate-home-os): Likewise.
(%test-separate-store-os): Likewise.
(%test-raid-root-os): Likewise.
(%test-encrypted-root-os): Likewise.
(%test-lvm-separate-home-os): Likewise.
(%test-encrypted-root-not-boot-os): Likewise.
(%test-btrfs-root-os): Likewise.
(%test-btrfs-raid-root-os): Likewise.
(%test-btrfs-root-on-subvolume-os): Likewise.
(%test-jfs-root-os): Likewise.
(%test-f2fs-root-os): Likewise.
(%test-xfs-root-os): Likewise.
(guided-installation-test): Likewise.
* gnu/tests/install.scm (qemu-command/writable-image): Replace the use of a
writable backing file by the use of the '-snapshot' option, and rename to...
(qemu-command*): ... this, adjusting all calls.
The 'login on tty1' and 'getlogin on tty1' tests were failing on a machine
equipped with slower hard drives.
* gnu/tests/base.scm (run-basic-test)
["login on tty1", "getlogin on tty1"]: Bump timeout from 10 to 30 s.
The <nix/config.nix> support has been removed in Nix 2.4:
https://github.com/NixOS/nix/pull/4025. Rely on the store ping command instead
to check that we can communicate with the daemon.
* gnu/tests/package-management.scm (run-nix-test): Use the store ping command
instead of building a dummy derivation.
* gnu/services/telephony.scm (jami-configuration)[jamid]: Rename libring to
libjami.
* gnu/services/telephony.scm
(jami-configuration->command-line-arguments): Adjust daemon file name.
* gnu/services/telephony.scm (jami-service-type): Adjust doc.
* gnu/tests/telephony.scm (run-jami-test): Check for 'jamid' process, not
'dring'.
* doc/guix.texi (Telephony Services): Adjust doc for the jami-qt to jami and
libring to libjami packages renaming.
We had several bug reports with a root cause of "the clock was
incorrect" from users who used the installer to install a non-graphical
Guix System.
* gnu/installer/services.scm (%system-services): Add the ntp-service-type.
* gnu/installer/newt/services.scm (run-system-administration-cbt-page): New
variable.
(run-services-page): Use run-system-administration-cbt-page when not
installing a desktop.
* gnu/installer/tests.scm (choose-services): Add and use a
choose-misc-service? procedure.
* gnu/tests/install.scm (installation-target-os-for-gui-tests)<services>: Add
ntp-service-type.
This test has probably never been working. Rename it nfs-full, and test that
an NFS server can be started in a VM and mounted in another VM.
* gnu/tests/nfs.scm (run-nfs-root-fs-test): Rename it ...
(run-nfs-full-test): ... this way.
(%test-nfs-root-fs): Rename it ...
(%test-nfs-full): ... this way.
The docker tests are broken because the docker overlay doesn't support running
on our own storage overlay. Use the new <virtual-machine> volatile? field to
spawn a VM with a persistent storage and no overlay.
* gnu/tests/docker.scm (run-docker-test): Add the docker-tarball to the gc
roots as the host store is not shared anymore. Spawn a VM without volatile
storage.
(run-docker-system-test): Ditto.
(%test-docker-system): Adapt it to use the image API.
This code duplicates the (gnu system image) and (gnu build image) code. Using
VM for image generation is not needed, not portable and really slow. Remove
all the VM image generation code to make sure that only the image API is used.
* gnu/build/vm.scm: Remove it. Move the qemu-command procedure to ...
* gnu/build/marionette.scm: ... here.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it.
* tests/modules.scm: Ditto.
* gnu/tests/install.scm: Ditto.
* gnu/system/vm.scm: Adapt it and remove expression->derivation-in-linux-vm,
qemu-img, system-qemu-image/shared-store and system-docker-image procedures.
* doc/guix.texi (G-Expressions): Adapt it.
* gnu/tests/rsync.scm (run-rsync-test)["Test file not copied to
read-only share", "Test file correctly received from read-only share"]:
New tests.
(%rsync-os): Define two modules.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
Use a CEST timezone as this is the assumed timezone in the run-basic-test
procedure.
* gnu/tests/install.scm (%encrypted-root-not-boot-os,
%btrfs-root-on-subvolume-os): Use a CEST timezone.
Fixes <https://issues.guix.gnu.org/50830>.
Reported by podiki on #guix.
Previously, glibc 2.33 would look for
/gnu/store/...-glibc-2.33/etc/localtime instead of /etc/localtime.
* gnu/packages/base.scm (glibc)[arguments]: Remove #:make-flags.
[phases]: In 'pre-configure', modify 'inet/Makefile' instead of
'sunrpc/Makefile' since this is where these bits are in 2.33.
(glibc-2.31)[arguments]: Add 'set-etc-rpc-installation-directory'
phase.
(glibc-2.30): Inherit from GLIBC-2.31.
* gnu/tests/base.scm (run-basic-test)["libc honors /etc/localtime"]: New
test.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Fixes a regression introduced in
0b5e128750, whereby 'qemu-img create ...'
as used here would fail with:
qemu-img: disk.img: Backing file specified without backing format
thereby breaking tests from (gnu tests install).
* gnu/tests/install.scm (qemu-command/writable-image): Pass "-F qcow2".
Adapt to the postgresql default socket directory set to /var/run/postgresql.
* gnu/services/databases.scm (<postgresql-config-file>)[socket-directory]: Set
to /var/run/postgresql.
(<postgresql-role-configuration>): Ditto.
* gnu/tests/databases.scm (run-postgresql-test): Adapt it.
