* gnu/build/image.scm (make-unformatted-image): New procedure.
(make-partition-image): Add support for unformatted partition.
* gnu/system/image.scm (system-disk-image)[partition->gpt-type]: Add
case for using unformatted partition uuid.
This follows up on commit c077345539, and
adds a comment to avoid this in future.
* gnu/system/file-systems.scm (invalid-file-system-flags):
Add 'no-diratime to the list of KNOWN-FLAGS.
Fixes <https://issues.guix.gnu.org/61156>.
* gnu/build/linux-container.scm (container-excursion): Add extra call to
'primitive-fork' and invoke THUNK in the child process.
* tests/containers.scm ("container-excursion"): Remove extra
'primitive-fork' call, now unnecessary.
("container-excursion*, /proc"): New test.
* gnu/build/linux-container.scm (container-excursion): Return the raw
status value.
* tests/containers.scm ("container-excursion, same namespaces"): Add
'status:exit-val' call.
* guix/scripts/container/exec.scm (guix-container-exec): Correctly
handle the different cases.
Fixes a regression introduced in
450f774028 and
e3c6575ee9, which introduced
unquote-splicing without changing quote to quasiquote.
* gnu/build/hurd-boot.scm (set-hurd-device-translators)[devices]: Use
quasiquote, note quote.
Addresses <https://issues.guix.gnu.org/59695>.
* gnu/build/image.scm (make-vfat-image): When creating a fat filesystem
for UEFI bootable partition use 512 byte blocks.
Fixes <https://issues.guix.gnu.org/59185>.
* guix/build/syscalls.scm (MS_REC): New variable.
* gnu/build/file-systems.scm (mount-flags->bit-mask): Set MS_REC bit when
bind-mounting.
There was a tiny possibility that the first QEMU process would still be
running by the time we launch the second one.
* gnu/build/marionette.scm (marionette-pid): Export.
* gnu/tests/base.scm (run-root-unmount-test)[test]: Add 'waitpid' call.
* gnu/build/install.scm (evaluate-populate-directive): By default, error when
the target of a symlink doesn't exist. Always ensure TARGET ends with "/".
(populate-root-file-system): Call evaluate-populate-directive with
#:error-on-dangling-symlink #t and add comment.
* gnu/build/linux-modules.scm (<pci-device>): New record type.
(pci-device-class-predicate, storage-pci-device?, network-pci-device?)
(display-pci-device?, pci-devices?): New procedures.
* gnu/build/marionette.scm (wait-for-screen-text): New 'pre-action' and
'post-action' arguments. Update doc. Call the procedures before and after
the OCR occurs, respectively.
This is to make it easier to debug test failures involving
'wait-for-screen-text': the screendump image used for the OCR is now preserved
for inspection when 'wait-for-screen-text' fails.
* gnu/build/marionette.scm (marionette-screen-text): Return the screendump
image file as the second value. Adjust doc.
(wait-for-screen-text): Add the preserved screendump image file name to the
error message. Adjust doc.
It has only one user, which is better suited for wait-for-screen-text anyway.
* gnu/tests/base.scm (run-basic-test): Refactor to use wait-for-screen-text
instead of marionette-screen-text.
This change is motivated by the fact that Account.registeredName is a volatile
account data, not exported along the account and retrieved from the name
server. Have it always return Account.username instead, so that the result is
reproducible independent of whether networking is available or not.
* gnu/build/jami-service.scm (account->username): Always return the account
fingerprint. Adjust doc.
(id->username): Likewise.
Fixes <https://issues.guix.gnu.org/57827>.
Reported by Mathieu Othacehe <othacehe@gnu.org>.
Fixes a regression introduced with the Shepherd 0.9.2 upgrade in
1ba0e38267, whereby IN and OUT would no
longer be closed when 'fork+exec-command/container' would call
'exec-command*' as part of the THUNK passed to 'container-excursion*'.
This is because the Shepherd 0.9.2 assumes file descriptors are properly
marked as O_CLOEXEC and, consequently, 'exec-command' no longer run the
close(2) loop prior to 'exec'.
* gnu/build/linux-container.scm (container-excursion*): Add calls to
'fcntl'.
Log the remaining contnet written to the REPL, so that there's more to go on
than:
socket:5:14: Unknown # object: "#<"
* gnu/build/marionette.scm (marionette-eval): Catch exceptions from read and
log the remainder of the content from the REPL.
Since this code is run from PID 1, this ensures file descriptors to
sensitive files and devices are not accidentally leaked to
sub-processes.
* gnu/build/file-systems.scm (call-with-input-file): New procedure.
(mount-file-system): Use 'close-fdes' + 'open-fdes'.
The uuid field of <partition> defaults to #false. This should be reflected
when creating the partition.
* gnu/build/image.scm (make-ext-image): Make it optional.
* gnu/build/marionette.scm (wait-for-screen-text): Return the last OCR'd text
when the predicate fails to match instead of the not useful predicate object.
Enable the QEMU guest agent interface in marionette VMs, run the
qemu-guest-agent service in one and try talking to it.
* gnu/build/marionette.scm (make-marionette): Enable the guest agent device.
* gnu/tests/virtualization.scm (run-qemu-guest-agent-test): New procedure.
(%test-qemu-guest-agent): New variable.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/bootloader/grub.scm (grub-efi32-bootloader): New variable.
(install-grub-efi32): New variable.
* gnu/build/bootloader.scm (install-efi): Add a 'targets' keyword
argument.
(install-efi-loader): Likewise.
* gnu/build/image.scm (initialize-efi32-partition): New procedure.
* gnu/packages/bootloaders.scm (grub-efi32): New variable.
* gnu/system/image.scm (esp32-partition): New variable
(efi32-disk-image): New variable.
(efi32-raw-image-type): New variable.
(system-disk-image)[partition-image]: Set '#:grub-efi32' when
calling the partition initializer.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami'
and 'jami-provisioning' system tests to pass again.
In version 0.9.0, Shepherd constructors are now run concurrently, via
cooperative scheduling (Guile Fibers). The Jami service previously relied on
blocking sleeps while polling for D-Bus services to become ready after forking
a process; this wouldn't work anymore since while blocking the service process
wouldn't be given the chance to finish starting. The new reliance on Fibers
in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant
that it wouldn't work outside of Shepherd anymore. Finally, the
'start-service' Shepherd procedure used in the test suite would cause the Jami
daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0).
To fix/simplify these problems, this change does the following:
1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify
things, such as avoiding the need to fork 'dbus-send' processes.
2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries'
waiting syntax.
3. A 'dbus' package variant is used to adjust the session bus configuration,
tailoring it for the use case at hand.
4. Avoid start-service in the tests, preferring 'jami-service-available?' for
now.
* gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes)
(deserialize-item, serialize-boolean, dbus-dict->alist)
(dbus-array->list, parse-account-ids, parse-account-details)
(parse-contacts): Delete procedures.
(%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group)
(%send-dbus-debug): Delete parameters.
(jami-service-running?): New procedure.
(send-dbus/configuration-manager): Rename to...
(call-configuration-manager-method): ... this. Turn METHOD into a positional
argument. Turn ARGUMENTS into an optional argument. Invoke
`call-dbus-method' instead of `send-dbus', adjusting callers accordingly.
(get-account-ids, id->account-details, id->account-details)
(id->volatile-account-details, username->id, add-account remove-account)
(username->contacts, remove-contact, add-contact, set-account-details)
(set-all-moderators, username->all-moderators?, username->moderators)
(set-moderator): Adjust accordingly.
(with-retries, send-dbus, dbus-available-services)
(dbus-service-available?): Move to ...
* gnu/build/dbus-service.scm: ... this new module.
(send-dbus): Rewrite to use the Guile AC/D-Bus library.
(%dbus-query-timeout, sleep*): New variables.
(%current-dbus-connection): New parameter.
(initialize-dbus-connection!, argument->signature-type)
(call-dbus-method): New procedures.
(dbus-available-services): Adjust accordingly.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register new module.
* gnu/packages/glib.scm (dbus-for-jami): New variable.
* gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to
dbus-for-jami.
(jami-dbus-session-activation): Write a D-Bus daemon configuration file at
'/var/run/jami/session-local.conf'.
(jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers
as extensions. Adjust imported modules. Remove no longer used parameters.
<jami-dbus-session>: Use a PID file, avoiding the need for the manual
synchronization.
<jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using
'jami-service-available?' instead of 'dbus-service-available?'.
* gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set
DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use
'jami-service-available?' to determine if the service is started rather than
the now problematic Shepherd's 'start-service'.
* gnu/build/image.scm (make-vfat-image): Pass fs-bits as an argument and force
1kb logical sector size only if "ESP" flag is set.
(make-partition-image): Add "fat32" partition type, support explicit "fat16"
type with vfat alias.
* gnu/system/image.scm (partition->dos-type partition): Return file system IDs
for "fat16" and "fat32" partitions.
(partition->gpt-type partition): Ditto.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/build/image.scm (sexp->partition): Add flags support.
* gnu/system/image.scm (partition->gexp): Ditto.
(system-disk-image): Set the genimage bootable flag if it is part of the
partition flags.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/build/linux-container.scm (wait-child-process)
(status->exit-status): New procedures.
(call-with-container): Add #:child-is-pid1? parameter and honor it.
[thunk*]: New variable. Pass it to 'run-container'.
