The Knot DNS service in Guix uses two days, or 48 hours, for the SOA
refresh interval but that is outside the range of RFC 1912, which is
entitled "Common DNS Operational and Configuration Errors." [1]
Section 2.2 of RFC 1912 recommends a maximum of 12 hours for the SOA
refresh rate: "You can keep it short (20 mins to 2 hours) if you
aren't worried about a small increase in bandwidth used, or longer
(2-12 hours) if your Internet connection is slow or is started on
demand."
This commit sets the default refresh interval at the nearest value
recommended by the standard, which is 12 hours.
Due to the widespread adoption of NOTIFY messages between primary and
secondary DNS servers, the SOA refresh interval has arguably lost some
importance, but the Guix default should still be in line with the
standards.
Values outside the recommended range can provoke warning messages from
services commonly used to find bugs in DNS configurations, such as the
MX Toolbox Super Tool. [2]
[1] https://datatracker.ietf.org/doc/rfc1912/
[2] https://mxtoolbox.com/SuperTool.aspx
* gnu/services/dns.scm (<zone-file>)[refresh]: Default to (* 12 3600).
Signed-off-by: 宋文武 <iyzsong@member.fsf.org>
This follows up on commit ae0975332c60818793c6c63a3646c982d686bf49?.
* gnu/services/desktop.scm (geoclue-service-type): Set default-value.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
* doc/guix.texi (Miscellaneous Services): Replace 'lirc-service' with 'lirc-service-type'.
Document <lirc-configuration>.
* gnu/services/lirc.scm (<lirc-configuration>): Set default values based on
the arguments from the now deprecated 'lirc-service' procedure.
(lirc-service-type): Set default value.
(lirc-service): Deprecate procedure.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Desktop Services): Replace 'geoclue-service' with 'geoclue-service-type'.
* gnu/services/desktop.scm (<geoclue-configuration>): Set default values
based on the values from the now deprecated geoclue-service procedure.
(geoclue-service): Deprecate procedure.
(desktop-services-for-system): Use geoclue-service-type.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/desktop.scm (<elogind-configuration>)[handle-hibernate-key]: Set default value to 'hibernate.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Networking Services): Remove mention of lsh-service.
Document lsh-service-type and lsh-service-configuration.
* gnu/services/ssh.scm (<lsh-configuration>): Set default values based
on the now deprecated 'lsh-service' procedure.
(lsh-service-type): Set default value.
(lsh-service): Deprecate procedure.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Base Services): Replace rngd-service with rngd-service-type.
Document <rngd-configuration>.
* gnu/services/base.scm (<rngd-configuration>): Set default values from
the values in the now deprecated 'rngd-service' procedure.
(rngd-service): Deprecate procedure.
(rngd-service-type): Set default value.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/desktop.scm (<sugar-desktop-configuration>): Add new fields for
activities and gobject-introspection.
(sugar-gobject-introspection, sugar-activities): New procedures.
(sugar-desktop-service-type): Install packages for activities and
gobject-introspection alongside the sugar package.
* doc/guix.texi (Desktop Services): Document changes.
Fixes <https://issues.guix.gnu.org/61201>.
Previously, common practice was to splice arbitrary strings (user names,
file names, etc.) into Texinfo snippets passed to 'display-hint'. This
is unsafe in the general case because at signs and braces need to be
escaped to produced valid Texinfo. This commit addresses that.
* guix/ui.scm (texinfo-quote): New procedure.
(display-hint): When ARGUMENTS is non-empty, pass it to 'texinfo-quote'
and call 'format'.
(report-unbound-variable-error, check-module-matches-file)
(display-collision-resolution-hint, run-guix-command): Remove explicit
'format' call; pass 'format' arguments as extra arguments to 'display-hint'.
* gnu/services/monitoring.scm (zabbix-front-end-config): Likewise.
* guix/scripts.scm (warn-about-disk-space): Likewise.
* guix/scripts/build.scm (%standard-cross-build-options)
(%standard-native-build-options): Likewise.
* guix/scripts/describe.scm (display-checkout-info): Likewise.
* guix/scripts/environment.scm (suggest-command-name): Likewise.
* guix/scripts/home.scm (process-command): Likewise.
* guix/scripts/home/edit.scm (service-type-not-found): Likewise.
* guix/scripts/import.scm (guix-import): Likewise.
* guix/scripts/package.scm (display-search-path-hint): Likewise.
* guix/scripts/pull.scm (build-and-install): Likewise.
* guix/scripts/shell.scm (auto-detect-manifest): Likewise.
* guix/scripts/system.scm (check-file-system-availability): Likewise.
(guix-system): Likewise.
* guix/scripts/system/edit.scm (service-type-not-found): Likewise.
* guix/status.scm (print-build-event): Likewise.
* gnu/services/desktop.scm (gnome-setuid-programs): New variable.
(gnome-desktop-service-type): Extend setuid-program-service-type with it.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/desktop.scm (<gnome-desktop-configuration>): Rename gnome
package accessor to gnome-desktop-configuration-gnome, to avoid name conflict.
(gnome-packages): Change first argument from a config object to a the gnome
package used. Rename second argument from package to name. Extract core
logic into...
(gnome-package): ... this.
(gnome-udev-rules, gnome-polkit-settings): Adjust accordingly.
(gnome-desktop-service-type): Likewise.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/desktop.scm (gnome-polkit-settings): Add spice-gtk to the GNOME
packages providing polkit rules.
(package-direct-input-selector): Allow passing a list corresponding to the
dependency tree, so that non-propagated transitive inputs can be specified.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Fixes a regression introduce in 01334a61c7
that would prevent system cross-compilation (with "guix system image
--target=...") due to 'font-gnu-unifont' depending on 'perl-gd', which
currently cannot be cross-compiled.
* gnu/services/base.scm (%default-console-font, kmscon-service-type):
Refer to 'font-gnu-unifont' with 'ungexp-native'.
It has even better language support than LatGrkCyr-8x16 and can show
fancy progress bars.
* gnu/services/base.scm (%default-console-font): Use unifont.
* gnu/services/configuration.scm
(generate-documentation): Format a list of packages by their names.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Deprecates %facebook-host-aliases in favour of using
hosts-service-type service extensions.
* gnu/services/networking.scm
(block-facebook-hosts-service-type): New variable.
(%facebook-host-aliases): Deprecate variable.
* doc/guix.texi: Document it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/base.scm (<host>): New record type.
(host): New procedure.
(hosts-service-type): New variable.
* doc/guix.texi (Service Reference): Document it.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* gnu/packages/jami.scm (libjami) [outputs]: Add a "bin" output.
[arguments]: Add a move-jamid phase.
* gnu/services/telephony.scm
(jami-configuration->command-line-arguments): Refer to the "bin" output of
libjami.
(jami-shepherd-services): Likewise.
This is a followup to commit 5c5f0fc113
* gnu/services/audio.scm (mpd-serialize-list-of-string): Fix serialization procedure.
Signed-off-by: Leo Famulari <leo@famulari.name>
* gnu/services/audio.scm (mympd-service-type): New variable.
* gnu/tests/audio.scm (%test-mympd): New variable.
* doc/guix.texi: Document it.
Signed-off-by: Liliana Marie Prikler <liliana.prikler@gmail.com>
Services should not expect for XDG_RUNTIME_DIR to be set.
Inferring from the past comment, this seemed to resolve an issue when
the service was launched with an _interactive_ user-account,
which tends to have this variable set by the login-manager.
This is not the case for system accounts and setting this variable
results in PulseAudio (launched by the same system user) failing to start
since it attempts to use a nonexistent directory.
Ideally, this service should have a home-service counterpart but the old
behavior can be emulated by setting the environment-variables field to:
(environment-variables
(list
(string-append "XDG_RUNTIME_DIR=/run/user/"
(number->string (passwd:uid (getpwnam "myuser"))))))
* gnu/services/audio.scm
(mpd-configuration)[environment-variables]: New field.
(mpd-shepherd-service)[start]: Use new field.
* doc/guix.texi (Audio Services)[Music Player Daemon]: Document it.
Signed-off-by: Liliana Marie Prikler <liliana.prikler@gmail.com>
* gnu/services/web.scm (<hpcguix-web-configuration>)[specs]: Default to #f.
(hpcguix-web-shepherd-service): Do not pass '--config' when SPECS is #f.
(hpcguix-web-service-type)[default-value]: New field.
* doc/guix.texi (Web Services): Adjust accordingly.
* gnu/services/base.scm (<greetd-terminal-configuration>)[source-profile?]:
New field.
(make-greetd-terminal-configuration-file): Serialize new field to
configuration file.
* doc/guix.texi (Base Services): Document it.
* gnu/services/games.scm (joycond-configuration): New configuration type.
(joycond-shepherd-service): New procedure.
(joycond-service-type): New variable.
* doc/guix.texi (Game Services): Document it.
This fixes a regression from 543d971ed2 whereby
match-lambda due to configuration field reordering.
* gnu/services/security.scm:
[serialize-fail2ban-ignore-cache-configuration]: Switch to match-record.
[serialize-fail2ban-jail-filter-configuration]: Switch to match-record.
[serialize-fail2ban-jail-action-configuration]: Switch to match-record.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/desktop.scm (enlightenment-desktop-service-type): Extend
the enlightenment-desktop-service-type with the udev rules from the
ddcutil input in the udev-service-type.
Fixes <https://issues.guix.gnu.org/60383>.
* gnu/services/sound.scm (pulseaudio-etc): Produce daemon.conf
unconditionally, with the correct default-script-file location. Produce
client.conf unconditionally.
Reported-by: Bruno Victal <mirai@makinata.eu>
* gnu/services/desktop.scm (bluetooth-service): Sync docstring with info,
remove mention to group not really needed to access D-Bus service.
* doc/guix.texi (Desktop Services): Also remove mention to group here.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/ganeti.scm (ganeti-watcher-jobs): Label job as "ganeti-watcher".
(ganeti-cleaner-jobs): Labels jobs as "ganeti master cleaner" and "ganeti node
cleaner".
This provides glyphs for additional fonts such as Amharic that were
otherwise missing.
Fixes <https://issues.guix.gnu.org/60164>.
Reported by Wolf <wolf@wolfsden.cz>.
* gnu/services/base.scm (kmscon-service-type): In 'start' method,
pass #:environment-variables to set 'XDG_DATA_DIRS'.
* gnu/services/ldap.scm (slapd-configuration): Update default value for
run-dir to match defaults of 389-ds-base package.
* doc/guix.texi: Update documentation.
'generic-serialize-alist' refers to (gnu home services version-control)
for usage examples but there's no such module.
* gnu/services/configuration.scm (generic-serialize-alist): Adjust
docstring.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/nix.scm (<nix-configuration>)[build-directory]: New field.
(nix-service-etc, nix-shepherd-service): Take them into account.
* doc/guix.texi (Nix): Update it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Previously the service would keep starting more and more processes.
* gnu/services/guix.scm (guix-build-coordinator-shepherd-services): Fix how
make-forkexec-constructor is called.
This reduces the closure size of systems by removing one glibc
copy--namely (@ (gnu packages base) glibc) in addition to (@ (gnu
packages commencement) glibc-final).
* gnu/services/base.scm (<nscd-configuration>)[glibc]: Change default
value to use 'let-system' and 'canonical-package' as appropriate.
This allows 'match-record' to be more efficient (field offsets are
computed at compilation time) and to report unknown fields at
macro-expansion time.
* guix/records.scm (map-fields): New macro.
(define-record-type*)[rtd-identifier]: New procedure.
Define TYPE as a macro and use a separate identifier for the RTD.
(lookup-field, match-record-inner): New macros.
(match-record): Rewrite in terms of 'match-error-inner'.
* tests/records.scm ("match-record, simple")
("match-record, unknown field"): New tests.
* gnu/services/cuirass.scm (cuirass-shepherd-service): Rename 'log-file'
local variable to 'main-log-file'.
* gnu/services/getmail.scm (serialize-getmail-configuration-file): Move
after <getmail-configuration-file> definition.
Previously, we were passing '-b', thereby starting the server in the
background. Consequently the 'start' method could complete before the
server was ready to accept connections on its socket, leading to
non-deterministic test failures.
Reported by Mathieu Othacehe <othacehe@gnu.org>.
* gnu/services/security.scm (fail2ban-shepherd-service): Change
FAIL2BAN-ACTION to invoke 'fail2ban-client'.
Change 'start' method to use 'make-forkexec-constructor'; start the
server in the foreground with '-f' and pass '-x' to force execution of
the server, as done upstream in 'fail2ban.service.in'.
* gnu/services/security.scm (fail2ban-shepherd-service): Change
FAIL2BAN-ACTION to return an 'invoke' gexp.
Adjust the shepherd 'start' and 'stop' fields accordingly. Have 'stop'
return #f on success.
Fixes <https://issues.guix.gnu.org/59423>.
* gnu/services/configuration.scm (define-configuration-helper): Rename the
accessor of the %location field from "NAME-location" to
"NAME-source-location".
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Reported-by: Pierre Langlois <pierre.langlois@gmx.com>
* gnu/services/vpn.scm (wireguard-activation): Use the "wg" binary from
the package given to <wireguard-configuration>.
Signed-off-by: 宋文武 <iyzsong@member.fsf.org>
The service already runs with the specified user and group, so there is no use
in writing it to the configuration files. This change is mainly done for
compatibility with 'zabbix-agent2' which does not understand the User=
setting, but also to document the correct data type for the "group" setting.
* gnu/services/monitoring.scm (serialize-string): Filter USER and GROUP
fields.
(group?, serialize-group): Remove variables.
(zabbix-server-configuration, zabbix-agent-configuration): Document the GROUP
field as 'string'.
* doc/guix.texi (Monitoring Services): Adjust accordingly.
Fixes <https://issues.guix.gnu.org/59423>.
* gnu/services/configuration.scm (define-configuration-helper): Rename the
accessor of the %location field from "NAME-location" to
"NAME-source-location".
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Reported-by: Pierre Langlois <pierre.langlois@gmx.com>
This allows 'match-record' to be more efficient (field offsets are
computed at compilation time) and to report unknown fields at
macro-expansion time.
* guix/records.scm (map-fields): New macro.
(define-record-type*)[rtd-identifier]: New procedure.
Define TYPE as a macro and use a separate identifier for the RTD.
(lookup-field, match-record-inner): New macros.
(match-record): Rewrite in terms of 'match-error-inner'.
* tests/records.scm ("match-record, simple")
("match-record, unknown field"): New tests.
* gnu/services/cuirass.scm (cuirass-shepherd-service): Rename 'log-file'
local variable to 'main-log-file'.
* gnu/services/getmail.scm (serialize-getmail-configuration-file): Move
after <getmail-configuration-file> definition.
* gnu/services/networking.scm (network-manager-configuration)[iwd?]: New
field.
(network-manager-shepherd-service): Add iwd to requirements if needed.
* doc/guix.texi: Add information about iwd? option.
* gnu/services/databases.scm (mysql-install): Run "mariadb-install-db" instead
of a hard coded set of SQL commands.
(mysql-upgrade-wrapper): Explicitly run as mysql user.
* gnu/services/databases.scm (mysql-with-install-lock): Remove variable.
(mysql-start): Rename to ...
(mysqld-wrapper): ... this. Do the preliminary initialization steps and call
out to MYSQL-INSTALL when necessary.
(mysql-install): Only initialize table schemas.
(mysql-install-shepherd-service): Remove.
(mysql-service)[requirement]: Remove 'mysql-install. Add 'user-processes.
[start]: Don't pass #:user and #:group.
(mysql-shepherd-services): Remove MYSQL-INSTALL-SHEPHERD-SERVICE.
* gnu/services/databases.scm (mysql-upgrade-wrapper): Take service
configuration as argument, and pass the config file to mysql_upgrade.
(mysql-upgrade-shepherd-service): Pass CONFIG instead of just socket and
executable to MYSQL-UPGRADE-WRAPPER.
* gnu/services/databases.scm (mysql-configuration): Add datadir property.
* gnu/services/databases.scm (mysql-configuration-file): Replace hard coded
data dir with property from config.
* gnu/services/databases.scm (%mysql-activation): Remove activation, it runs
before PID 1. The data dir may reside on a file system not mounted at this
time.
* gnu/services/databases.scm (mysql-install-shepherd-service): Create service
which replaces the activation. Provide mysql-install.
* gnu/services/databases.scm (mysql-shepherd-service): Move invocation of
mysqld to mysql-start program-file, because the invocation gotten more
complex. Require mysql-install.
* gnu/services/databases.scm (mysql-start): Invoke mysqld only if a lock file
appears.
* gnu/services/databases.scm (mysql-shepherd-services): Prepend the install
service before the normal service.
* gnu/services/databases.scm (mysql-upgrade-wrapper): Increase timeout to
20s to let the mysql install procedure finish.
Signed-off-by: Marius Bakke <marius@gnu.org>
