Fixes a regression introduced in
938448bf40 whereby
'fork+exec-command/container' would return #t, then used as the running
value of the 'guix-daemon' service in the installer. Upon installation
completion, stopping the 'guix-daemon' service would fail with
wrong-type-arg because that #t would be passed to the 'stop' method in
lieu of a PID.
* gnu/build/shepherd.scm (fork+exec-command/container): Return a PID
rather than #t.
Fixes a regression introduced in
938448bf40 where 'exec-command*' could
get #:directory #f, in particular when called by
'fork+exec-command/container'.
* gnu/build/shepherd.scm (exec-command*): Add default value for #:directory.
This ensures those programs, if invoked by shepherd (where standard
input is /dev/null), can still interact with the user if needed.
* gnu/build/file-systems.scm (check-ext2-file-system)
(check-bcachefs-file-system, check-btrfs-file-system):
(check-fat-file-system, check-jfs-file-system):
(check-f2fs-file-system, check-ntfs-file-system):
(check-xfs-file-system): Use 'system*/tty' instead of 'system*'.
Fixes <https://issues.guix.gnu.org/54770>.
Regression introduced in 400c9ed3d7.
Previously, for an encrypted /home (say), "cryptsetup open" would be
invoked by shepherd, with /dev/null as its standard input. It would
thus run in non-interactive mode and, instead of asking for a
passphrase, fail with:
Nothing to read on input.
This change ensures it runs in interactive mode.
* gnu/build/file-systems.scm (system*/console, system*/tty): New
procedures.
* gnu/system/mapped-devices.scm (open-luks-device): Use 'system*/tty'
instead of 'system*'.
This lets the 'childhurd' service start in the background, letting
shepherd perform other tasks in the meantime, including serving
clients (such as the 'herd' command).
* gnu/build/secret-service.scm (with-modules): New macro.
(wait-for-readable-fd): Add cooperative implementation when Fibers is in
use.
(secret-service-send-secrets): Define 'sleep' so that it cooperates when
Fibers is in use.
* gnu/build/shepherd.scm (exec-command*): New procedure, with code
formerly...
(make-forkexec-constructor/container): ... here. Use it.
(fork+exec-command/container): Use 'fork+exec-command' only when
CONTAINER-SUPPORT? is false or PID is the current process.
* gnu/build/linux-boot.scm (boot-system): Honor rootfstype and rootflags
arguments. Update doc. Error out in case there is insufficient information
with regard to the root file system.
Restore the behavior of inferring the root device from the root file system
from the operating system in case the root argument is not provided.
* doc/guix.texi (Initial RAM Disk): Document the new command-line parameters.
This is to make it less surprising, given the common convention sets forth by
the kernel Linux command-line parameters.
* gnu/build/linux-boot.scm (boot-system): Rename '--load', '--repl', '--root'
and '--system' to 'gnu.load', 'gnu.repl', 'root' and 'gnu.system',
respectively. Adjust doc.
(find-long-option): Adjust doc.
* gnu/installer/parted.scm (installer-root-partition-path): Adjust accordingly.
* gnu/system.scm (bootable-kernel-arguments): Add a VERSION argument and
update doc. Use VERSION to conditionally return old style vs new style initrd
arguments.
(%boot-parameters-version): Increment to 1.
(operating-system-boot-parameters): Adjust doc.
(operating-system-boot-parameters-file): Likewise.
* gnu/system/linux-initrd.scm (raw-initrd, base-initrd): Likewise.
* doc/guix.texi: Adjust doc.
* gnu/build/activation.scm (boot-time-system): Adjust accordingly.
* gnu/build/hurd-boot.scm (boot-hurd-system): Likewise.
* gnu/packages/commencement.scm (%final-inputs-riscv64): Adjust comment.
Adds low-level support for launching Linux containers with cgroup namespaces.
* gnu/build/linux-container.scm (%namespaces): Add 'cgroup.
(namespaces->bit-mask): Handle it.
* guix/build/syscalls.scm (CLONE_NEWCGROUP): New variable.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Fixes <https://issues.guix.gnu.org/52539>.
Reported by Jacob First <jacob.first@member.fsf.org>.
* gnu/build/accounts.scm (allocate-passwd): Add comment as to why
'real-name' is taken from PREVIOUS. Add (not system?) to the
condition.
* gnu/system.scm (operating-system-etc-service) <login.defs>: Add
"CHFN_RESTRICT".
* gnu/system.scm (%setuid-programs): Add "chfn".
* gnu/system/pam.scm (base-pam-services): Add "chfn".
* doc/guix.texi (User Accounts): Document it.
This code duplicates the (gnu system image) and (gnu build image) code. Using
VM for image generation is not needed, not portable and really slow. Remove
all the VM image generation code to make sure that only the image API is used.
* gnu/build/vm.scm: Remove it. Move the qemu-command procedure to ...
* gnu/build/marionette.scm: ... here.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it.
* tests/modules.scm: Ditto.
* gnu/tests/install.scm: Ditto.
* gnu/system/vm.scm: Adapt it and remove expression->derivation-in-linux-vm,
qemu-img, system-qemu-image/shared-store and system-docker-image procedures.
* doc/guix.texi (G-Expressions): Adapt it.
* gnu/build/chromium-extension.scm (make-crx): Use a Chromium profile relative
to the build directory instead of /tmp. While here, remove obsolete comment.
* gnu/build/chromium-extension.scm (make-crx): Pass #:keep-mtime? #t to
COPY-RECURSIVELY. Remove defunct FAKETIME workaround. While at it, pack the
extension in the scratch working directory instead of the transient
store-mapped /tmp.
* gnu/build/chromium-extension.scm (make-crx): Delay with-imported-modules
until the builder code.
(crx->chromium-json): Remove needless define* while at it.
* gnu/build/chromium-extension.scm (chromium-json->profile-object): Remove
variable.
(file-sha256): New variable.
(make-chromium-extension): Rename OUTPUT parameter to prevent conflict.
Adjust other variable names for clarity.
[inputs]: Clear.
[arguments]: Inline and simplify the final transformation with a gexp.
Loading the framebuffer-coreboot module simply fails with EINVAL on a
non-Corebooted system. Crashing the system with a kernel panic is not
a reasonable reaction to loading valid modules on unsupported hardware.
The kernel should log an error, which the user is expected to see.
Bogus module names will still be fatally reported by linux-modules.drv.
* gnu/build/linux-modules.scm (load-linux-module*):
Ignore EINVAL errors when operating recursively.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
* gnu/services/virtualization.scm (secret-service-activation): Remove.
(secret-service-shepherd-services): New procedure.
(secret-service-type)[extensions]: Remove ACTIVATION-SERVICE-TYPE
extension. Add SHEPHERD-ROOT-SERVICE-TYPE and
USER-PROCESSES-SERVICE-TYPE extensions.
* gnu/build/secret-service.scm (delete-file*): New procedure.
(secret-service-receive-secrets): Use it.
* gnu/build/file-systems.scm (ext2-superblock-volume-name)
(bcachefs-superblock-volume-name, btrfs-superblock-volume-name)
(fat32-superblock-volume-name, fat16-superblock-volume-name)
(iso9660-superblock-volume-name, jfs-superblock-volume-name)
(f2fs-superblock-volume-name): Mention the file system type in the
docstring for consistency with the other superblock procedures.
* guix/cpio.scm (device-number, device->major+minor):
Move to, and subsequently import from, …
* guix/build/syscalls.scm (device-number, device-number->major+minor):
…here. Note the slight name change.
(mounts): Replace 16-bit open code with a DEVICE-NUMBER call.
* gnu/build/linux-boot.scm (device-number):
Remove duplicate 16-bit implementation in favour of the one above.
(resume-if-hibernated): Reuse DEVICE-NUMBER->MAJOR+MINOR.
It was never guaranteed to be run for non-root file systems. It was for
root file systems only due to a bug now fixed.
* gnu/build/file-systems.scm (check-btrfs-file-system): Don't invoke
‘btrfs device scan’ here.
* gnu/system/linux-initrd.scm (raw-initrd): Do so here if any btrfs file
systems are present.
* gnu/build/file-systems.scm (check-ext2-file-system)
(check-bcachefs-file-system, check-btrfs-file-system)
(check-fat-file-system, check-jfs-file-system, check-f2fs-file-system)
(check-ntfs-file-system, check-file-system): Take and honour new FORCE?
and REPAIR arguments. Update the docstring. Adjust all callers.
* gnu/system/file-systems.scm <file-system>: Add new SKIP-CHECK-IF-CLEAN?
and REPAIR fields.
(file-system->spec, spec->file-system): Adjust accordingly.
* gnu/build/linux-boot.scm (mount-root-file-system): Take new
SKIP-CHECK-IF-CLEAN? and REPAIR keyword arguments. Thread them through
to CHECK-FILE-SYSTEM.
* doc/guix.texi (File Systems): Document both new <file-system> options.
This broke compilation of Guix with guile@3.0.2 with:
In procedure make-regexp: Invalid range end
The fix is to replace [0-9A-f] with [0-9A-Fa-f].
* gnu/build/jami-service.scm (account-fingerprint-rx): Correct regexp.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
New record <setuid-program> with fields for setting the specific user
and group, as well as specifically selecting the setuid and setgid bits,
for a program within the setuid-program-service.
* gnu/services.scm (setuid-program-file-like-deprecated): New function.
(setuid-program-service-type): Make use of
setuid-program->activation-gexp. Adjust the extend property to handle
<setuid-program>.
* gnu/build/activation.scm (activate-setuid-programs): Update to expect a
<setuid-record> list for each program entry.
* gnu/system.scm: (operating-system-setuid-programs): Renamed to
%operating-system-setuid-programs and replace it with new procedure.
(operating-system-default-essential-services,
hurd-default-essential-services): Replace
operating-system-setuid-programs with
%operating-system-setuid-programs.
* gnu/system/setuid.scm: New file.
* doc/guix.texi (Setuid Programs): Document <setuid-program>.
Co-authored-by: Brice Waegeneire <brice@waegenei.re>
This broke compilation of Guix with guile@3.0.2 with:
In procedure make-regexp: Invalid range end
The fix is to replace [0-9A-f] with [0-9A-Fa-f].
* gnu/build/jami-service.scm (account-fingerprint-rx): Correct regexp.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
