Fixes <https://issues.guix.gnu.org/55806>.
* gnu/system/install.scm (%installation-services): Refactor into a
procedure, so that it can capture the system it's installing for.
Conditionally add uvesafb-service-type based on whether v86d is
supported by the target architecture.
(installation-os)[services]: Use the %installation-service procedure.
(uvesafb-shepherd-service): Remove %host-type checks.
Signed-off-by: Florian Pelz <pelzflorian@pelzflorian.de>
* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
This is a followup to a7ac19851b.
* gnu/system/install.scm (installation-os)[setuid-programs]: Use
'setuid-program'.
* gnu/system/hurd.scm (%setuid-programs/hurd): Use 'file-like->setuid-program'.
Until now deduplication was performed as an additional pass after
copying files, which involve re-traversing all the files that had just
been copied.
* guix/store/deduplication.scm (copy-file/deduplicate): New procedure.
* tests/store-deduplication.scm ("copy-file/deduplicate"): New test.
* guix/build/store-copy.scm (populate-store): Add #:deduplicate?
parameter and honor it.
* tests/gexp.scm ("gexp->derivation, store copy"): Pass #:deduplicate? #f
to 'populate-store'.
* gnu/build/image.scm (initialize-root-partition): Pass #:deduplicate?
to 'populate-store'. Pass #:deduplicate? #f to 'register-closure'.
* gnu/build/vm.scm (root-partition-initializer): Likewise.
* gnu/build/install.scm (populate-single-profile-directory): Pass
#:deduplicate? #f to 'populate-store'.
* gnu/build/linux-initrd.scm (build-initrd): Likewise.
* guix/scripts/pack.scm (self-contained-tarball)[import-module?]: New
procedure.
[build]: Pass it as an argument to 'source-module-closure'.
* guix/scripts/pack.scm (squashfs-image)[build]: Wrap in
'with-extensions'.
* gnu/system/linux-initrd.scm (expression->initrd)[import-module?]: New
procedure.
[builder]: Pass it to 'source-module-closure'.
* gnu/system/install.scm (cow-store-service-type)[import-module?]: New
procedure. Pass it to 'source-module-closure'.
Move the cow-store procedure from the service declaration in (gnu system
install) to (gnu build install), so that it can be called from within a
different context than Shepherd.
* gnu/build/install.scm (mount-cow-store, unmount-cow-store): New procedures.
* gnu/system/install.scm (make-cow-store): Remove it,
(cow-store-service-type): adapt it accordingly.
Tools such as efibootmgr rely on the deprecated /sys/firmware/efi/vars API as
well as on the new /sys/firmware/efi/efivars API. The latter needs to be
mounted.
Reported by Keyhenge here:
https://lists.gnu.org/archive/html/bug-guix/2020-04/msg00274.html
Here is the efivarfs documentation:
https://www.kernel.org/doc/Documentation/filesystems/efivarfs.txt.
* gnu/system/file-systems.scm (%efivars-file-system): New exported variable,
(%base-file-systems): add it.
* gnu/system/install.scm (%efivars-file-system): Add it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
During the installation, it may be needed to build locales that are not
covered by glibc-utf8-locales. Make sure that the libraries required to build
locales are available.
This is a follow-up of 0eed771275.
* gnu/system/install.scm (installation-os)[services]: Add
%default-locale-libcs to gc-root-service-type.
Because the installer's uvesafb service loads uvesafb only on some machines.
This is a follow-up to commit 0ad60b2a89.
* gnu/system/install.scm (uvesafb-shepherd-service): Adjust provision and
description fields.
Fixes <https://bugs.gnu.org/40538>.
Machines without Kernel Mode Setting (those with many old and current AMD
GPUs, SiS GPUs, …) need uvesafb to show the GUI installer. Some may also need
a kernel parameter like nomodeset or vga=793, but we leave that for the user
to specify in GRUB.
* gnu/system/install.scm (uvesafb-shepherd-service): New procedure.
(uvesafb-service-type): New variable.
(%installation-services): Add it.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
This is a followup to 99c45877a9, which
introduced a regression: "guix system build gnu/system/install.scm"
would fail to find the .tmpl files.
* gnu/system/install.scm (/etc/configuration-files)[file]: Remove.
[directory]: Use 'local-file' with a literal string.
* gnu/packages/bootloaders (u-boot-firefly-rk3399): New variable.
* gnu/bootloader/u-boot (install-firefly-rk3399-u-boot): New variable.
(u-boot-firefly-rk3399-bootloader): New variable.
* gnu/system/install (define firefly-rk3399-installation-os): New variable.
* gnu/packages/bootloaders (u-boot-rock64-rk3328): New variable.
* gnu/bootloader/u-boot (install-rock64-rk3328-u-boot): New variable.
(u-boot-rock64-rk3328-bootloader): New variable.
* gnu/system/install (define rock64-installation-os): New variable.
Suggested by Florian Pelz.
* gnu/system/install.scm (%installation-node-names): New variable.
(log-to-info): Expect the chosen locale as an argument. Compute the
language, Info file name, and node name. Install the locale.
(documentation-shepherd-service): Add 'locale' parameter to the 'start'
action and honor it. Set GUIX_LOCPATH and TERM as environment variables
for the process.
* gnu/installer.scm (apply-locale): Use (gnu services herd). Call
'stop-service' and 'start-service' with the chosen locale.
* gnu/system/install.scm (log-to-info): Add 'tty' and 'user'
parameters. Open the tty and change UIDs/GIDs.
(documentation-shepherd-service): New procedure.
(%documentation-users, documentation-service-type): New variables.
(%installation-services): Use it instead of 'mingetty-service'.
* gnu/installer.scm: Rename to ...
* gnu/installer/record.scm: ... this.
* gnu/installer/build-installer.scm: Move everything to the build side and
rename to gnu/installer.scm.
* gnu/installer/newt.scm: Remove all the gexps and add depencies to newt
modules as this code will only be used on the build side by now.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it,
(dist_installer_DATA): New rule to install installer's aux-files.
* gnu/system/install.scm (%installation-services): Use only
'installer-program' from (gnu installer). The installer is now choosen on the
build side.
* guix/self.scm (*system-modules*): Restore previous behaviour and add all
installer files to #:extra-files field of the scheme-node.
* po/guix/POTFILES.in: Adapt it.
Source /etc/environment just before starting the installer. The login program
is supposed to load the environment variables of this file through PAM, but as
we replace it by the installer, they are no longer available. This is mostly
useful for the LANG environment variable.
* gnu/installer/build-installer.scm (installer-program-launcher): New exported
procedure.
* gnu/system/install.scm (%installation-services): Restore most of the origin
code. kmscon is only started on TTY1, and the graphical installer is the
login-program.
* configure.ac: Require that guile-newt is available.
* gnu/installer.scm: New file.
* gnu/installer/aux-files/logo.txt: New file.
* gnu/installer/build-installer.scm: New file.
* gnu/installer/connman.scm: New file.
* gnu/installer/keymap.scm: New file.
* gnu/installer/locale.scm: New file.
* gnu/installer/newt.scm: New file.
* gnu/installer/newt/ethernet.scm: New file.
* gnu/installer/newt/hostname.scm: New file.
* gnu/installer/newt/keymap.scm: New file.
* gnu/installer/newt/locale.scm: New file.
* gnu/installer/newt/menu.scm: New file.
* gnu/installer/newt/network.scm: New file.
* gnu/installer/newt/page.scm: New file.
* gnu/installer/newt/timezone.scm: New file.
* gnu/installer/newt/user.scm: New file.
* gnu/installer/newt/utils.scm: New file.
* gnu/installer/newt/welcome.scm: New file.
* gnu/installer/newt/wifi.scm: New file.
* gnu/installer/steps.scm: New file.
* gnu/installer/timezone.scm: New file.
* gnu/installer/utils.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add previous files.
* gnu/system.scm: Export %root-account.
* gnu/system/install.scm (%installation-services): Use kmscon instead of linux
VT for all tty.
(installation-os)[users]: Add the graphical installer as shell of the root
account.
[packages]: Add font related packages.
* po/guix/POTFILES.in: Add installer files.
These procedures were already either undocumented (and de facto
deprecated) or documented as deprecated or redundant.
* gnu/services/base.scm (guix-service, guix-publish-service): Mark as
deprecated.
* gnu/services/mcron.scm (mcron-service): Likewise.
* gnu/services/networking.scm (tor-service): Likewise.
* doc/guix.texi (Scheduled Job Execution): Remove 'mcron-service' and
adjust example.
(Networking Services): Remove 'tor-service'.
* gnu/tests/base.scm (%mcron-os): Use 'mcron-service-type' instead of
'mcron-service'.
* gnu/tests/networking.scm (%tor-os): Use 'tor-service-type' instead of
'tor-service'.
* tests/guix-system.sh: Likewise.
