This module allows for communicating with the IPFS
gateway over the HTTP interface. The commit has been
cherry-picked from <https://issues.guix.gnu.org/33899>.
The procedures for adding and restoring file trees have
been removed as according to a reply issue 33899, a different
format will be used. The procedure 'add-data' has been
exported as it will be used in the system test for IPFS.
* guix/ipfs.scm: New file.
* Makefile.am (MODULES): Add it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This makes powerpc64le-linux a supported architecture for Guix, but not for
Guix System.
* Makefile.am (SUPPORTED_SYSTEMS): Add an entry for powerpc64le-linux.
* etc/guix-install.sh (chk_sys_arch): Same.
* guix/packages.scm (%supported-systems): Same.
* m4/guix.m4 (GUIX_ASSERT_SUPPORTED_SYSTEM): Same.
* tests/guix-build.sh (all_systems): Same.
This removes hydra support to use Cuirass as the only continuous integration
system.
* build-aux/hydra/gnu-system.scm: Remove it.
* build-aux/hydra/guix-modular.scm: Ditto.
* build-aux/hydra/guix.scm: Ditto.
* build-aux/cuirass/hydra-to-cuirass.scm: Ditto.
* Makefile.am (EXTRA_DIST): Update it.
(hydra-jobs.scm): Remove it.
(cuirass-jobs.scm): Update it.
* build-aux/hydra/evaluate.scm: Move it to ...
* build-aux/cuirass/evaluate.scm: ... here.
* build-aux/cuirass/guix-modular.scm: Remove it.
* build-aux/cuirass/gnu-system.scm: Ditto.
* guix/packages.scm (%hydra-supported-systems): Rename it to ...
(%cuirass-supported-systems): ... this variable.
* build-aux/check-final-inputs-self-contained: Adapt it.
* etc/release-manifest.scm: Ditto.
* gnu/ci.scm (package->alist): Remove it.
(derivation->job): New procedure.
(package-job, package-cross-job, cross-jobs, image-jobs, system-test-jobs,
tarball-jobs): Use it.
(guix-jobs): New procedure.
(hydra-jobs): Rename it to ...
(cuirass-jobs): ... this procedure.
This means there's a module for working with substitutes, rather than all the
code sitting in the script. The need for this can be seen with the weather and
challenge scripts, that now don't have to use code from the substitute script,
but can instead use the substitute module.
The separation here between the actual functionality of the substitute script
and the underlying functionality used both there and elsewhere should make
maintenance easier moving forward.
This commit just moves code, none of the code should have been changed
significantly.
* guix/scripts/substitute.scm (%narinfo-cache-directory, %narinfo-ttl,
%narinfo-negative-ttl, %narinfo-transient-error-ttl, %unreachable-hosts): Move
variables to guix/substitutes.scm.
(narinfo-cache-file, cached-narinfo, cache-narinfo!, narinfo-request,
read-to-eof, call-with-connection-error-handling, fetch-narinfos,
lookup-narinfos, lookup-narinfos/diverse): Move procedures to
guix/substitutes.scm.
* guix/substitutes.scm: New file.
* Makefile.am: Add it.
* guix/narinfo.scm: Remove redundant module.
* guix/scripts/challenge.scm: Change (guix scripts substitute) to (guix
substitutes).
* guix/scripts/weather.scm: Change (guix scripts substitute) to (guix
substitutes).
This is a followup to commit 8727870ff4.
* gnu/packages/aux-files/linux-libre/5.9-arm.conf,
gnu/packages/aux-files/linux-libre/5.9-arm64.conf,
gnu/packages/aux-files/linux-libre/5.9-i686.conf,
gnu/packages/aux-files/linux-libre/5.9-x86_64.conf: Delete files.
* Makefile.am (AUX_FILES): Remove them.
* Makefile.am (make-check-po-rule): New definition.
Add top-level 'eval' and calls to 'make-check-po-rule' to generate
'check-po.DOMAIN' rules.
(check-po): New rule.
This separation between the code for dealing with narinfos from the code doing
that for a purpose should make things clearer, and better support components
other that the substitute script in using this code.
This is just moving the code around, no code should have been significantly
changed.
* guix/scripts/substitute.scm (<narinfo>): Move record type to (guix narinfo).
(fields->alist, narinfo-hash-algorithm+value, narinfo-hash->sha256,
narinfo-signature->canonical-sexp, narinfo-maker, read-narinfo,
narinfo-sha256, valid-narinfo?, write-narinfo, narinfo->string,
string->narinfo, equivalent-narinfo?, supported-compression?,
compresses-better?, narinfo-best-uri): Move procedures to (guix narinfo).
(%compression-methods): Move variable to (guix narinfo).
* guix/narinfo.scm: New file.
* Makefile.am (MODULES): Add it.
* po/guix/POTFILES.in: Add 'guix/narinfo.scm'.
* gnu/packages/vim.scm (vim)[arguments]: Add new 'install-guix.vim phase
to install vendor specific vimrc.
* gnu/packages/aux-files/guix.vim: New file.
* Makefile.am (AUX_FILES): Register it.
Fixes <https://bugs.gnu.org/44649>.
Reported by Daniel Brooks <db48x@db48x.net>.
This is a followup to 6799e6e578, which
rightfully removed the '.cil' file from the distribution, but wrongfully
installed the '.cil.in' file instead of the '.cil' file.
* Makefile.am (nodist_selinux_policy_DATA): Remove ".in".
Following discussions in <https://issues.guix.gnu.org/43893>, keeping a copy
of the updated package source is desirable when generating a release.
* build-aux/update-guix-package.scm (version-controlled?): Remove variable.
(call-with-temporary-git-worktree): Renamed from
'with-temporary-git-worktree'. Update doc. Do not change directory
implicitly. Define as a procedure, not a syntax.
(keep-source-in-store): New procedure.
(main): Adjust to use with call-with-temporary-git-worktree. Add the sources
to the store when GUIX_ALLOW_ME_TO_USE_PRIVATE_COMMIT is set. Exit gracefully
when FIND-ORIGIN-REMOTE returns #f.
(%savannah-guix-git-repo-push-url-regexp): Adjust match for a potential colon
separator.
* Makefile.am (GUIX_ALLOW_ME_TO_USE_PRIVATE_COMMIT): Adjust.
* .dir-locals.el (scheme-mode): Remove entry for with-temporary-git-worktree.
* doc/contributing.texi (Updating the Guix Package): Update doc.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* Makefile.am (GUIX_GIT_KEYRING): New variable.
(authenticate): Use GUIX_GIT_KEYRING to select the keyring branch
reference.
* doc/contributing.texi (Building from Git): Add an example about the
use of GUIX_GIT_KEYRING.
This gets rid of:
guile: warning: failed to install locale
when running the 'guix' command on a foreign distro where 'GUIX_LOCPATH'
isn't set.
* Makefile.am (pkglibexec_PROGRAMS, guile_SOURCES, guile_LDADD)
(guile_CFLAGS): New variables.
(install-exec-hook): New target.
(AUX_FILES): Remove 'guile-launcher.c'.
* configure.ac: Use 'GUILE_FLAGS'.
Since commit ba48895899, selected UTF-8
locales are bundled. However, because 'guix-command' is itself a Guile
script, users would still see Guile's warning, particularly on foreign
distros:
$ LC_ALL=sdf guix foo
guile: warning: failed to install locale
hint: Consider installing the `glibc-utf8-locales' [...]
User commands would print that warning, but more importantly, each
invocation of 'guix substitute' would print it, even though
'guix-daemon.service' explicitly chooses "en_US.utf8", which is in
'glibc-utf8-locales'. This leads to confusion since users would keep
seeing this message unless/until they realize they also need to install
'glibc-utf8-locales' in root's profile.
This patch gets rid of "guile: warning: ..." for a guix-pulled 'guix'
command.
* guix/self.scm (specification->package): Add "gcc-toolchain".
(quiet-guile): New procedure.
(guix-command): Use it.
* gnu/packages/aux-files/guile-launcher.c: New file.
* Makefile.am (AUX_FILES): Add it.
* guix/scripts/system.scm (list-image-types): New procedure,
(%options): add "image-type" and "list-image-types" options, remove
"file-system-type" option,
(show-help): adapt accordingly,
(%default-options): also adapt, and set the default "image-type" to "raw",
(perform-action): add image-type argument and remove file-system-type argument,
(process-action): adapt perform-action call,
(system-derivation-for-action): remove base-image
argument, add image-type argument, and use it to create the image passed to
"system-image".
* tests/guix-system.sh: Adapt accordingly and add a test for
"--list-image-types" command.
* doc/guix.texi (Building the Installation Image,
Invoking guix system): Adapt accordingly.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* guix/scripts/offload.scm (<build-machine>)[systems]: New field.
[system]: Accessor changed to %build-machine-system. Default to #f.
* guix/scripts/offload.scm (build-machine-system): Wrap %build-machine-system
with a deprecation warning.
(build-machine-systems): Access the new systems field or fallback to use
build-machine-system, for backward compatibility.
(machine-matches?): Adjust.
* tests/offload.scm: Add tests...
* Makefile.am (SCM_TESTS): ...and register them.
* doc/guix.texi (Daemon Offload Setup): Update doc.
* Makefile.am (MODULES): Remove guix/zlib.scm and guix/lzlib.scm,
(SCM_TESTS): remove tests/zlib.scm, tests/lzlib.scm.
* build-aux/build-self.scm (make-config.scm): Remove unused %libz variable.
* configure.ac: Remove LIBZ and LIBLZ variables and check instead for
Guile-zlib and Guile-lzlib.
* doc/guix.texi ("Requirements"): Remove zlib requirement and add Guile-zlib
and Guile-lzlib instead.
* gnu/packages/package-management.scm (guix)[native-inputs]: Add "guile-zlib"
and "guile-lzlib",
[inputs]: remove "zlib" and "lzlib",
[propagated-inputs]: ditto,
[arguments]: add "guile-zlib" and "guile-lzlib" to Guile load path.
* guix/config.scm.in (%libz, %liblz): Remove them.
* guix/lzlib.scm: Remove it.
* guix/man-db.scm: Use (zlib) instead of (guix zlib).
* guix/profiles.scm (manual-database): Do not stub (guix config) in imported
modules list, instead add "guile-zlib" to the extension list.
* guix/scripts/publish.scm: Use (zlib) instead of (guix zlib) and (lzlib)
instead of (guix lzlib),
(string->compression-type, effective-compression): do not check for zlib and
lzlib availability.
* guix/scripts/substitute.scm (%compression-methods): Do not check for lzlib
availability.
* guix/self.scm (specification->package): Add "guile-zlib" and "guile-lzlib"
and remove "zlib" and "lzlib",
(compiled-guix): remove "zlib" and "lzlib" arguments and add guile-zlib and
guile-lzlib to the dependencies, also do not pass "zlib" and "lzlib" to
"make-config.scm" procedure,
(make-config.scm): remove "zlib" and "lzlib" arguments as well as %libz and
%liblz variables.
* guix/utils.scm (lzip-port): Use (lzlib) instead of (guix lzlib) and do not
check for lzlib availability.
* guix/zlib.scm: Remove it.
* m4/guix.m4 (GUIX_LIBZ_LIBDIR, GUIX_LIBLZ_FILE_NAME): Remove them.
* tests/lzlib.scm: Use (zlib) instead of (guix zlib) and (lzlib)
instead of (guix lzlib), and do not check for zlib and lzlib availability.
* tests/publish.scm: Ditto.
* tests/substitute.scm: Do not check for lzlib availability.
* tests/utils.scm: Ditto.
* tests/zlib.scm: Remove it.
* guix/build/maven/java.scm: New file.
* guix/build/maven/plugin.scm: New file.
* guix/build/maven/pom.scm: New file.
* Makefile.am (MODULES): Add them.
* guix/build-system/ant.scm (%ant-build-system-modules): Add them to the
build side.
* guix/build/java-utils.scm (generate-plugin.xml, install-pom-file)
(install-from-pom): New procedures.
* Makefile.am (channel_intro_commit, channel_intro_signer): New
variables.
(authenticate): Use it.
(EXTRA_DIST): Remove 'build-aux/git-authenticate.scm'.
* build-aux/git-authenticate.scm: Remove.
