* gnu/system/images/novena.scm (novena-barebones-os)[kernel]: Use the
linux-libre-arm-generic kernel.
[initrd-modules]: Do not specify any modules as sdhci-esdhc-imx, ahci_imx and
i2c-dev are built-in in the arm-generic kernel.
This is to make it less surprising, given the common convention sets forth by
the kernel Linux command-line parameters.
* gnu/build/linux-boot.scm (boot-system): Rename '--load', '--repl', '--root'
and '--system' to 'gnu.load', 'gnu.repl', 'root' and 'gnu.system',
respectively. Adjust doc.
(find-long-option): Adjust doc.
* gnu/installer/parted.scm (installer-root-partition-path): Adjust accordingly.
* gnu/system.scm (bootable-kernel-arguments): Add a VERSION argument and
update doc. Use VERSION to conditionally return old style vs new style initrd
arguments.
(%boot-parameters-version): Increment to 1.
(operating-system-boot-parameters): Adjust doc.
(operating-system-boot-parameters-file): Likewise.
* gnu/system/linux-initrd.scm (raw-initrd, base-initrd): Likewise.
* doc/guix.texi: Adjust doc.
* gnu/build/activation.scm (boot-time-system): Adjust accordingly.
* gnu/build/hurd-boot.scm (boot-hurd-system): Likewise.
* gnu/packages/commencement.scm (%final-inputs-riscv64): Adjust comment.
These changes broke the creation of the 'linux-modules-database' for all kernel
series besides 5.15, 5.4, and 5.10, like this:
------
gnu/build/linux-modules.scm:257:5: kernel module not found "framebuffer_coreboot" "/gnu/store/yff45fr6q93mw44zdql9ffr95zcvwxcn-linux-libre-4.9.299/lib/modules"
------
We should support the coreboot framebuffer, but we need to test that change more
completely before deploying it.
This effectively reverts the following commits:
1dfe8c3721 "gnu: linux-libre: Build simplefb into all x86{,_64} kernels."
bc09e7ab56 "gnu: linux-libre: Support the Coreboot framebuffer."
Fixes <https://issues.guix.gnu.org/52667> "System reconfiguration fails to build
linux-modules.drv".
This is a follow-up to 49599fab56.
Fixes: <https://issues.guix.gnu.org/52908>.
* gnu/services/xorg.scm (set-xorg-configuration)[login-manager-service-type]:
When the current system or target system begins with the string "x86_64", use
gdm-service-type as before; otherwise, use sddm-service-type.
* gnu/system/examples/vm-image.tmpl (services): Add sddm-service-type to the
list of service types to remove.
* gnu/system/examples/desktop.tmpl: Only use gnome-desktop-service-type and
the default login manager in set-xorg-configuration when the target system is
x86_64.
Fixes <https://issues.guix.gnu.org/52539>.
Reported by Jacob First <jacob.first@member.fsf.org>.
* gnu/build/accounts.scm (allocate-passwd): Add comment as to why
'real-name' is taken from PREVIOUS. Add (not system?) to the
condition.
* gnu/system.scm (operating-system-etc-service) <login.defs>: Add
"CHFN_RESTRICT".
* gnu/system.scm (%setuid-programs): Add "chfn".
* gnu/system/pam.scm (base-pam-services): Add "chfn".
* doc/guix.texi (User Accounts): Document it.
This attempts to mitigate <https://issues.guix.gnu.org/52667>.
It makes linux-libre@5.15 consistent with older versions which do not
support a modular simplefb, allowing a single %base-initrd-modules
simple list for all of them.
Unlike CONFIG_FB_SIMPLE=m, CONFIG_FB_SIMPLE=y conflicts with
CONFIG_DRM_SIMPLEDRM, so the latter is now disabled. Let us hope it is
not missed.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Unset CONFIG_DRM_SIMPLEDRM to build in CONFIG_FB_SIMPLE=y.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Remove "simplefb".
This code duplicates the (gnu system image) and (gnu build image) code. Using
VM for image generation is not needed, not portable and really slow. Remove
all the VM image generation code to make sure that only the image API is used.
* gnu/build/vm.scm: Remove it. Move the qemu-command procedure to ...
* gnu/build/marionette.scm: ... here.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it.
* tests/modules.scm: Ditto.
* gnu/tests/install.scm: Ditto.
* gnu/system/vm.scm: Adapt it and remove expression->derivation-in-linux-vm,
qemu-img, system-qemu-image/shared-store and system-docker-image procedures.
* doc/guix.texi (G-Expressions): Adapt it.
Also add a volatile? argument to the virtual-machine record. When volatile? is
true generate a QEMU script that mounts an overlay on top of a read only
storage. When volatile? is false, use a persistent, read-write storage.
* gnu/system/vm.scm (common-qemu-options): Add a rw-image? argument to use a
persistent storage.
(system-qemu-image/shared-store-script): Add a volatile? argument and honor
it. Use the image API to build the QEMU image.
(<virtual-machine>)[volatile?]: New field.
(virtual-machine-compiler): Pass the volatile? argument to the
system-qemu-image/shared-store-script procedure.
Without this, the kernel cannot write to the display until the
full-featured driver module (often i915) is loaded from the root file
system.
If the root file system is encrypted, the initrd's passphrase prompt
won't make it to the screen, and the fully responsive system will appear
frozen whilst waiting for user input.
* gnu/packages/aux-files/linux-libre/4.4-i686.conf,
gnu/packages/aux-files/linux-libre/4.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.14-i686.conf,
gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Mark simple framebuffers as generic system ones and enable ‘Google’
firmware drivers to enable Coreboot table support and its dependent
framebuffer driver module.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Add the framebuffer_coreboot and simplefb modules on x86 systems.
* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (%qemu-static-networking): New variable.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
* gnu/system/vm.scm (common-qemu-options): Remove the "-vga std" argument that
is the default since QEMU 2.2.
Suggested-by: Attila Lendvai <attila@lendvai.name>
It configures QEMU to use the tty it was started in for IO (as opposed to
opening a separate graphical window). This enables copy-pasting and
scrollback. Exit QEMU with C-a x.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Also add the
'-nographic' QEMU argument when called with #:graphic? #false.
* guix/scripts/system.scm (system-derivation-for-action): Propagate
the #:graphic? keyword arg.
(perform-action): Add and propagate the #:graphic? keyword arg.
(show-help): Add --no-graphic CLI arg.
(%options): Process the new --no-graphic CLI arg.
(process-action): Feed in the CLI arg through the #:graphic? keyword arg.
* doc/guix.texi (Invoking guix system): Add example to combine guix system and
invoking the vm start script into one command. Split the description of the
various options into separate paragraphs. Add a paragraph to describe
--no-graphic.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
'qemu-minimal' is enough for system tests, which is the main (only?) use
of <virtual-machine>.
* gnu/system/vm.scm (<virtual-machine>)[qemu]: Default to QEMU-MINIMAL.
Fixes <https://issues.guix.gnu.org/51425>.
Reported by Jonathan Brielmaier <jonathan.brielmaier@web.de>.
* gnu/system/file-systems.scm (invalid-file-system-flags)
(%validate-file-system-flags): New procedures.
(validate-file-system-flags): New macro.
(<file-system>)[flags]: Add 'sanitize' property.
Fixes regression introduced in d5073fd113,
whereby childhurd dependencies such as 'hurd' would erroneously be
attempted to build natively on x86_64-linux.
* gnu/system/images/hurd.scm (hurd-disk-image)[platform]: New field.
Let this be a warning against—even cautiously and deliberately—using
double negatives. You shall stare, but you shall not see.
* gnu/system/file-systems.scm (<file-system>): Fix the default
skip-check-if-clean? value to match the documentation and the intention.
It was never guaranteed to be run for non-root file systems. It was for
root file systems only due to a bug now fixed.
* gnu/build/file-systems.scm (check-btrfs-file-system): Don't invoke
‘btrfs device scan’ here.
* gnu/system/linux-initrd.scm (raw-initrd): Do so here if any btrfs file
systems are present.
* gnu/build/file-systems.scm (check-ext2-file-system)
(check-bcachefs-file-system, check-btrfs-file-system)
(check-fat-file-system, check-jfs-file-system, check-f2fs-file-system)
(check-ntfs-file-system, check-file-system): Take and honour new FORCE?
and REPAIR arguments. Update the docstring. Adjust all callers.
* gnu/system/file-systems.scm <file-system>: Add new SKIP-CHECK-IF-CLEAN?
and REPAIR fields.
(file-system->spec, spec->file-system): Adjust accordingly.
* gnu/build/linux-boot.scm (mount-root-file-system): Take new
SKIP-CHECK-IF-CLEAN? and REPAIR keyword arguments. Thread them through
to CHECK-FILE-SYSTEM.
* doc/guix.texi (File Systems): Document both new <file-system> options.
