The aim here is to improve the user experience. There's anecdotal evidence
that the network performance for bordeaux is better compared to ci at least
for some users, and I don't know of any issues with rate limiting or access
restriction for bordeaux compared to ci. It also has IPv6 support.
Additionally, bordeaux generally had more substitutes than ci, particularly
for aarch64-linux and armhf-linux. This change will offer a very slight
speedup for those substitutes that only bordeaux has.
Bordeaux has been a default substitute server for nearly 3 years now and I
think this change is overdue. I'm also hopeful that we'll be able to build on
the testing regarding mirrors for bordeaux, and that'll allow potentially
improving the hosting setup (through providing more redundancy) and further
improving substitute fetching for users who currently have issues with
substitute access.
* config-daemon.ac: Switch substitute urls order.
* doc/guix.texi: Ditto.
* etc/guix-install.sh: Ditto.
* gnu/installer/newt/network.scm (wait-service-online): Ditto.
* guix/store.scm (%default-substitute-urls): Ditto.
Change-Id: I4f6d93ae1fc8b03d80b47b18b5749a51f1fde17b
Signed-off-by: Christopher Baines <mail@cbaines.net>
* gnu/installer/hardware.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* gnu/installer.scm (installer-steps): Pass #:pci-database to the
'welcome' step procedure.
* gnu/installer/newt.scm (welcome-page): Add #:pci-database and pass it
to 'run-welcome-page'.
* gnu/installer/newt/welcome.scm (check-hardware-support): Add #:pci-database.
Enumerate unsupported PCI devices and run an error page when unsupported
devices are found.
(run-welcome-page): Add #:pci-database and pass it to
'check-hardware-support' and to the recursive call.
* gnu/installer/record.scm (<installer>)[welcome-page]: Adjust comment.
* doc/guix.texi (Hardware Considerations): Mention it.
This is a followup to 682639c107, which
added the uvesafb upfront, before welcome page had been displayed.
* gnu/installer/newt/welcome.scm (check-hardware-support): New
procedure.
(run-welcome-page): Use it.
When the user aborts the installation because a core dump is discovered or the
installation command failed, displaying the abort backtrace doesn't make much
sense. Hide it when the abort condition is &user-abort-error and skip directly
to the dump page.
* gnu/installer/steps.scm (&user-abort-error): New variable.
(user-abort-error?): New procedure.
* gnu/installer/newt/final.scm (run-install-failed-page): Raise a
user-abort-error.
* gnu/installer/newt/welcome.scm (run-welcome-page): Ditto.
* gnu/installer.scm (installer-program): Hide the backtrace page and directly
propose to dump the report when the a &user-abort-error is raised.
There will be false positives: Because the Guix installer uses the
kernel argument modprobe.blacklist=radeon,amdgpu and some AMD graphics
actually work okay according to h-node, these users will get a
false alarm.
* gnu/installer/newt/welcome.scm (run-welcome-page): Warn before showing
the welcome page.
This is a follow-up of: <https://issues.guix.gnu.org/57232>
* gnu/installer/newt/partition.scm (run-label-page): Add a confirmation page
when dealing with an EFI installation.
Checks the availability of the mirror bordeaux.guix.gnu.org in addition to
ci.guix.gnu.org. This allows to proceed the installation if the
ci.guix.gnu.org is unavailable.
* gnu/installer/newt/network.scm (wait-service-online): Relax internet check
availability criteria.
Signed-off-by: Andrew Tropin <andrew@trop.in>
These typos were found and reported through weblate.
* gnu/packages/audio.scm (wildmidi)[description]: Fix typo.
* gnu/packages/games.scm (cgoban)[description]: Fix typo.
* gnu/services/version-control.scm (gitolite-service-type)[description]:
Fix typo.
* gnu/installer/newt/substitutes.scm (run-substitutes-page): Remove full
stop at end of title.
* gnu/machine/ssh.scm (machine-ssh-configuration-system): Move
punctuation outside of quotes.
* guix/scripts/home.scm (process-action): Remove trailing space before
newline.
* guix/scripts/system.scm (show-help): Fix typo.
* guix/scripts/environment.scm (with-store/maybe): Fix typo.
Forbid root user creation as it could lead to a system without any
non-priviledged user accouts.
Fixes: <https://issues.guix.gnu.org/54666>.
* gnu/installer/newt/user.scm (run-user-add-page): Forbid it.
* gnu/installer.scm (installer-program): Let the installer customize
the dump archive.
* gnu/installer/dump.scm (prepare-dump, make-dump): Split make-dump in
prepare-dump, which copies the files necessary for the dump, and
make-dump which creates the archive.
* gnu/installer/record.scm (installer): Add report-page field. Change
documented return value of exit-error.
* gnu/installer/newt.scm (exit-error): Change arguments to be a string
containing the error. Let the user choose between exiting and
initiating a dump.
(report-page): Add new variable.
* gnu/installer/newt/page.scm (run-dump-page): New variable.
* gnu/installer/newt/dump.scm: Delete it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/installer/user.scm (<secret>, secret?, make-secret,
secret-content): Add opaque <secret> record that boxes its contents,
with a custom printer that doesn't display anything.
* gnu/installer/newt/user.scm (run-user-add-page, run-user-page): Box
it.
* gnu/installer/final.scm (create-user-database): Unbox it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Suggested-by: Josselin Poiret <dev@jpoiret.xyz>
* gnu/installer/dump.scm: New file.
* gnu/installer/newt/dump.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add them.
* gnu/installer/record.scm (<installer>)[dump-page]: New field.
* gnu/installer/steps.scm (%current-result): New variable.
(run-installer-steps): Update it.
* gnu/installer.scm (installer-program): Add tar and gip to the installer
path. Add guile-webutils and gnutls to the Guile extensions. Generate and send
the crash dump report.
* gnu/installer/newt.scm (exit-error): Add a report argument. Display the
report id.
(dump-page): New procedure.
(newt-installer): Update it.
* gnu/installer.scm (installer-program): Add gnutls extension.
* gnu/installer/newt/network.scm (wait-service-online): Check if the CI server
can be reached.
Filter the devices that are smaller than 2GiB in the device selection list.
* gnu/installer/parted.scm (%min-device-size): New variable.
(non-install-devices): Rename it ...
(eligible-devices): ... this way. Filter the install device as well as the
small devices.
* gnu/installer/newt/partition.scm (run-partitioning-page): Adapt it.
We had several bug reports with a root cause of "the clock was
incorrect" from users who used the installer to install a non-graphical
Guix System.
* gnu/installer/services.scm (%system-services): Add the ntp-service-type.
* gnu/installer/newt/services.scm (run-system-administration-cbt-page): New
variable.
(run-services-page): Use run-system-administration-cbt-page when not
installing a desktop.
* gnu/installer/tests.scm (choose-services): Add and use a
choose-misc-service? procedure.
* gnu/tests/install.scm (installation-target-os-for-gui-tests)<services>: Add
ntp-service-type.
Currently, the installer page RUN-OTHER-SERVICES-CBT-PAGE offers to the user all
installer services that are not of the types 'desktop', 'network-management', or
'networking'. Concretely, this means that it offers the CUPS printing service,
because that is the only service of a different type defined in the installer.
In later commits, we will add some services of a new type, and we only want them
to be offered when the user is installing a non-graphical system.
At least one of these new services (NTP) is part of %DESKTOP-SERVICES. If it
was also offered on RUN-OTHER-SERVICES-CBT-PAGE, and the user had configured a
system using %DESKTOP-SERVICES, the user could accidentally add NTP to their
services twice, which is an error and would break installation.
So, this commit makes the RUN-OTHER-SERVICES-CBT-PAGE be more specific about
what services to offer. This makes it easier to discriminate between desktop and
non-desktop installations, in terms of when a given service is offered.
* gnu/installer/newt/services.scm (RUN-OTHER-SERVICES-CBT-PAGE): Rename to ...
(RUN-PRINTING-SERVICES-CBT-PAGE): ... new variable, and select only 'document' services.
(RUN-SERVICES-PAGE): Adjust accordingly.
* gnu/installer/tests.scm (CHOOSE-SERVICES): Adjust accordingly.
Recommending ext4 over btrfs is probably ill-advised nowadays. See the
regular bug reports about running out of /gnu/store directory entries,
for which the documented fix then breaks booting with GRUB.
Instead, just list regular file systems alphabetically. We can bikeshed
bcachefs later ;-)
Move second-class file systems like NTFS to their own section at the end
of the list.
* gnu/packages/package-management.scm (run-fs-type-page): Reorder the
LISTBOX-ITEMS.
* gnu/installer/newt/partition.scm (run-fs-type-page): Add ‘xfs’ to the
list box.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type)
(partition-filesystem-user-type): Add ‘xfs’ mapping.
(create-xfs-file-system): New procedure.
(format-user-partitions): Use it.
* gnu/installer.scm (set-installer-path): Add xfsprogs.
* gnu/installer/services.scm (%system-services): Add CUPS.
* gnu/installer/newt/services.scm (run-other-services-cbt-page):
New procedure.
(run-services-page): Call it last.
Fixes: <https://issues.guix.gnu.org/49126>.
* gnu/installer/newt/partition.scm (run-disk-page): Fix the return value when
removing a free space partition.
* gnu/installer/parted.scm (&cannot-read-uuid): New condition.
(cannot-read-uuid?, cannot-read-uuid-partition): New procedures.
(check-user-partitions): Check that all user-partitions have a valid UUID,
raide the above condition otherwise.
* gnu/installer/newt/partition.scm (run-disk-page): Run an error page if the
&cannot-read-uuid condition is raised.
Fixes: <https://issues.guix.gnu.org/45378>.
* gnu/installer/newt/keymap.scm (run-layout-page): Return false when
"Continue" button is pressed.
(run-keymap-page): Do not try to compute variants if layout is false. Also do
not try to format the result if layout is false.
* gnu/installer.scm (compute-keymap-step): Do not apply keymap if
"run-keymap-page" returns false.
* gnu/installer/newt/partitions.scm (define-module): Use (ice-9 format).
(draw-formatting-page): Add parameter partitions and provide the list of
formatted partitions to the user.
(run-partitioning-page): Provide user-partitions to draw-formatting-page.
Note: This change requires an updated 'guix' package that contains
Linux-swap support in (gnu build file-systems).
* gnu/installer/parted.scm (user-partitions->configuration): Use UUIDs
in the 'swap-devices' field.
* gnu/installer/newt/final.scm (run-final-page)[wait-for-clients]: New
procedure. Use it.
* gnu/installer/tests.scm (choose-partitioning): Wait for
'starting-final-step' message and move configuration file dialog
handling to...
(conclude-installation): ... here. Send over PORT the reply
corresponding to 'starting-final-step'.
* gnu/tests/install.scm (gui-test-program): When ENCRYPTED? is false,
invoke 'swaplabel' in the marionette.
(installation-target-os-for-gui-tests): When ENCRYPTED? is false, except
a fixed UUID.
When the store overlay is mounted, other processes such as kmscon, udev
and guix-daemon may open files from the store, preventing the
underlying install support from being umounted. See:
https://lists.gnu.org/archive/html/guix-devel/2018-12/msg00161.html.
To avoid this situation, mount the store overlay inside a container,
and run the installation from within that container.
* gnu/build/shepherd.scm (fork+exec-command/container): New procedure.
* gnu/services/base.scm (guix-shepherd-service): Support an optional PID
argument passed to the "start" method. If that argument is passed, ensure that
guix-daemon enters the given PID MNT namespace by using
fork+exec-command/container procedure.
* gnu/installer/final.scm (umount-cow-store): Remove it,
(install-system): run the installation from within a container.
* gnu/installer/newt/final.scm (run-install-shell): Remove the display hack.
