mirror of
https://git.in.rschanz.org/ryan77627/guix.git
synced 2024-11-15 11:25:22 -05:00
74e35e8c94
* gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch: New file. * gnu/packages/patches/u-boot-pinebook-syscon-node.patch: New file. * gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch: New file. * gnu/packages/patches/u-boot-pinebook-video-bridge.patch: New file. * gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch: New file. * gnu/packages/patches/u-boot-pinebook-dts.patch: New file. * gnu/local.mk (dist_patch_DATA): Add them. * gnu/packages/bootloaders.scm (u-boot-pinebook): New exported variable. * gnu/bootloader/u-boot.scm (u-boot-pinebook-bootloader): New exported variable. * gnu/system/install.scm (pinebook-installation-os): New exported variable.
98 lines
3.3 KiB
Diff
98 lines
3.3 KiB
Diff
From 20940ef2a397446a209350900d3bd618c3fd5b94 Mon Sep 17 00:00:00 2001
|
|
From: Vasily Khoruzhick <anarsoul@gmail.com>
|
|
Date: Mon, 5 Nov 2018 20:24:28 -0800
|
|
Subject: [PATCH 07/13] mmc: sunxi: add support for automatic delay calibration
|
|
|
|
A64 and H6 support automatic delay calibration and Linux driver uses it
|
|
instead of hardcoded delays. Add support for it to u-boot driver.
|
|
|
|
Fixes eMMC instability on Pinebook
|
|
|
|
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
|
|
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
|
|
Cc: Vagrant Cascadian <vagrant@debian.org>
|
|
Reviewed-by: Jagan Teki <jagan@openedev.com>
|
|
---
|
|
arch/arm/include/asm/arch-sunxi/mmc.h | 6 +++++-
|
|
drivers/mmc/sunxi_mmc.c | 21 ++++++++++++++++++++-
|
|
2 files changed, 25 insertions(+), 2 deletions(-)
|
|
|
|
diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
|
|
index d98c53faaa..f2deafddd2 100644
|
|
--- a/arch/arm/include/asm/arch-sunxi/mmc.h
|
|
+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
|
|
@@ -46,7 +46,9 @@ struct sunxi_mmc {
|
|
u32 cbda; /* 0x94 */
|
|
u32 res2[26];
|
|
#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6)
|
|
- u32 res3[64];
|
|
+ u32 res3[17];
|
|
+ u32 samp_dl;
|
|
+ u32 res4[46];
|
|
#endif
|
|
u32 fifo; /* 0x100 / 0x200 FIFO access address */
|
|
};
|
|
@@ -130,5 +132,7 @@ struct sunxi_mmc {
|
|
#define SUNXI_MMC_COMMON_CLK_GATE (1 << 16)
|
|
#define SUNXI_MMC_COMMON_RESET (1 << 18)
|
|
|
|
+#define SUNXI_MMC_CAL_DL_SW_EN (0x1 << 7)
|
|
+
|
|
struct mmc *sunxi_mmc_init(int sdc_no);
|
|
#endif /* _SUNXI_MMC_H */
|
|
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
|
|
index 39f15eb423..147eb9b4d5 100644
|
|
--- a/drivers/mmc/sunxi_mmc.c
|
|
+++ b/drivers/mmc/sunxi_mmc.c
|
|
@@ -99,11 +99,16 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
|
|
{
|
|
unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
|
|
bool new_mode = false;
|
|
+ bool calibrate = false;
|
|
u32 val = 0;
|
|
|
|
if (IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE) && (priv->mmc_no == 2))
|
|
new_mode = true;
|
|
|
|
+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
|
|
+ calibrate = true;
|
|
+#endif
|
|
+
|
|
/*
|
|
* The MMC clock has an extra /2 post-divider when operating in the new
|
|
* mode.
|
|
@@ -174,7 +179,11 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
|
|
val = CCM_MMC_CTRL_MODE_SEL_NEW;
|
|
setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW);
|
|
#endif
|
|
- } else {
|
|
+ } else if (!calibrate) {
|
|
+ /*
|
|
+ * Use hardcoded delay values if controller doesn't support
|
|
+ * calibration
|
|
+ */
|
|
val = CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
|
|
CCM_MMC_CTRL_SCLK_DLY(sclk_dly);
|
|
}
|
|
@@ -228,6 +237,16 @@ static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc)
|
|
rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
|
|
writel(rval, &priv->reg->clkcr);
|
|
|
|
+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
|
|
+ /* A64 supports calibration of delays on MMC controller and we
|
|
+ * have to set delay of zero before starting calibration.
|
|
+ * Allwinner BSP driver sets a delay only in the case of
|
|
+ * using HS400 which is not supported by mainline U-Boot or
|
|
+ * Linux at the moment
|
|
+ */
|
|
+ writel(SUNXI_MMC_CAL_DL_SW_EN, &priv->reg->samp_dl);
|
|
+#endif
|
|
+
|
|
/* Re-enable Clock */
|
|
rval |= SUNXI_MMC_CLK_ENABLE;
|
|
writel(rval, &priv->reg->clkcr);
|
|
--
|
|
2.11.0
|
|
|