1 files changed, 0 insertions, 249 deletions

diff --git a/MIGRATION.md b/MIGRATION.md
deleted file mode 100644
index 92f6392..0000000
--- a/MIGRATION.md
+++ /dev/null
@@ -1,249 +0,0 @@
-# Migrating guix-dotfiles onto nix-combined
-
-This repo supersedes `guix-dotfiles/home-config/nix-home-manager` (the ad-hoc
-home-manager flake guix-dotfiles was already using) and pulls Linux desktop
-config that used to live in `guix-dotfiles/home-config/home-configuration.scm`
-into home-manager proper. It does **not** replace Guix itself: package
-management, the system config, and three specific home services stay in
-Guix (see "Stays in Guix" below).
-
-`nix-combined` is deliberately its own repo (own history, own remote) so
-that darwin machines never need to clone anything guix-related. It's wired
-into `guix-dotfiles` as a **git submodule** at
-`guix-dotfiles/home-config/nix-combined` - the rest of this section covers
-that wiring; everything after "Stays in Guix" is still a plan for you to
-apply by hand.
-
-## 1. Submodule wiring (already done in this working tree)
-
-Already applied, not yet committed/pushed - review with `git status`/`git
-diff` in `guix-dotfiles` before committing:
-
-- `guix-dotfiles/.gitmodules` added, pointing `home-config/nix-combined` at
-  **the local filesystem path** to this checkout of `nix-combined`. That
-  only works on this machine. **Before pushing**, create the real remote
-  (recommend `https://git.rschanz.org/nix-combined`, matching the
-  `nix-dotfiles`/`guix-dotfiles` naming convention) and push `nix-combined`
-  there, then run, from `guix-dotfiles`:
-  ```
-  git submodule set-url home-config/nix-combined https://git.rschanz.org/nix-combined
-  git add .gitmodules
-  git commit
-  ```
-- `home-configuration.scm`'s `%home-symlinks` now points
-  `.config/guix/home-config/nix-combined` at `.config/home-manager`
-  (previously `.config/guix/home-config/nix-home-manager`).
-- `deploy.sh`'s fresh-install clone now uses `git clone --recurse-submodules`
-  so a from-scratch deploy pulls `nix-combined` in the same step.
-
-**On existing machines**, after pulling this change:
-```
-git submodule update --init --recursive
-```
-(or `git clone --recurse-submodules` next time you clone `guix-dotfiles`
-fresh). Then switch with `home-manager switch --flake ~/.config/home-manager#ryan`
-(the `rebuild` zsh alias does this on Linux).
-
-**Updating `nix-combined` later**: since the submodule pins an exact commit,
-pulling new `nix-combined` changes needs a bump in `guix-dotfiles`:
-```
-cd home-config/nix-combined && git pull origin main && cd -
-git add home-config/nix-combined
-git commit -m "bump nix-combined"
-```
-
-The old `guix-dotfiles/home-config/nix-home-manager` directory (the
-pre-submodule ad-hoc flake) can be deleted once you've confirmed the new
-one builds and switches cleanly.
-
-**Leave the `nix-config` symlink entry alone for the first switch.** It's
-what sets `experimental-features = nix-command flakes` for your user today,
-which is what lets `home-manager`/`nix` read this flake at all -
-home-manager can't bootstrap its own prerequisite. `linux.nix` now writes
-its own `~/.config/nix/nix.conf` and `~/.config/nix/registry.json` via
-`xdg.configFile`, so *after* the first successful switch, remove the
-`nix-config` entry from `%home-symlinks` too - otherwise HM's files resolve
-through that symlink and land as untracked files inside the guix-dotfiles
-checkout instead of in the Nix store.
-
-## 2. Remove entries `home-configuration.scm` now duplicates
-
-Once nix-combined delivers a path, Guix must stop also writing it, or
-activation will collide (two things trying to own the same symlink target).
-In `home-configuration.scm`'s `home-xdg-configuration-files-service-type` and
-`home-files-service-type`, remove these lines (nix-combined now owns them):
-
-- `"nvim/init.vim"`, `"nvim/after/ftplugin/markdown/custom.vim"`,
-  `"nvim/after/ftplugin/mail/custom.vim"` - nix-combined's neovim config
-  (lazy.nvim-based, in `users/ryan/modules/nvim`) is the canonical one now;
-  the old vim-plug based `nvim/config/init.vim` + `plug.vim` is superseded.
-- `"hypr/monitors.conf"`, `"hypr/pyprland.toml"`, `"hypr/family_guy.mp4"`,
-  `"hypr/hyprlock.conf"`, `"hypr/hypridle.conf"`, `"hypr/kanshi.conf"`,
-  `"hypr/subwaysurfer.webm"`, `"hypr/scripts"` (the `hyprland.conf` itself
-  was already coming from the old nix-home-manager flake, unchanged in
-  spirit here - just re-homed)
-- `"wpaperd"`, `"mpv"`, `"foot"`, `"waybar"`, `"alacritty"`, `"aerc"`
-- `"pulse/client.conf"`
-- `.local/share/nvim/site/autoload/plug.vim` (dead once nvim is lazy.nvim-based)
-- `.local/share/mailvelope`, `.mozilla/native-messaging-hosts/tridactyl.json`,
-  `.local/share/tridactyl`
-- **`.icons`** (from `home-files-service-type`) - this one isn't optional
-  cleanup, it's a hard prerequisite. Guix delivers `.icons` today as a
-  single recursive `local-file` symlink, but `linux.nix`'s
-  `home.pointerCursor` (with `x11.enable = true`) needs to write
-  `~/.icons/default/index.theme` itself. With the old symlink still in
-  place, HM can't create a file inside a symlinked-to-store directory and
-  activation fails outright. Remove this entry before your first
-  `home-manager switch`.
-- `.gitconfig` (nix-combined's `programs.git` now owns this, with the
-  `filter.lfs` and `[sendemail]` sections merged in - they existed in
-  guix-dotfiles' `.gitconfig` but were missing from the old nix-dotfiles config)
-- `.ssh/config` (same story - nix-combined's `programs.ssh.settings` is a
-  strict superset: added the `linode` host, the `192.168.216.1`
-  legacy-algorithm host, the `KexAlgorithms` exclusion on `Host *`, and the
-  `Match host * exec "gpg-connect-agent ..."` line)
-- `.docker/cli-plugins` (docker-compose plugin - if you still want this,
-  it's cheap to add to `users/ryan/linux.nix`'s `home.file`; it wasn't
-  carried over because nothing else referenced it and I didn't want to
-  guess at whether you still use it)
-
-`hypr/Wallpapers` and the sway config were left alone deliberately - you said
-you'd handle wallpapers yourself, and `sway` isn't referenced by anything
-active (Hyprland is the real WM; see "Dead/unused" below).
-
-## 3. Switch the login shell to zsh
-
-`guix-dotfiles/modules/ryan-config/base-system.scm`'s `base-operating-system`
-has:
-
-```scheme
-;(shell (file-append zsh "/bin/zsh"))
-```
-
-commented out, so your account's login shell is still bash even though the
-canonical config (nix-dotfiles, and now nix-combined) is zsh. Uncomment that
-line (and rebuild/reconfigure the system) so `programs.zsh` in
-`users/ryan/common.nix` is actually what runs on login. Until you do, bash
-still runs (Guix's `home-bash-service-type` config, if still present, keeps
-working - just don't remove it from `home-configuration.scm` until the shell
-is actually switched, or you'll drop to a shell with no rc file at all).
-
-## Stays in Guix - no home-manager equivalent without systemd
-
-Home-manager's `services.*` modules assume a systemd user session to
-autostart things (or launchd on macOS). Guix uses shepherd instead, and
-home-manager has no shepherd backend. These three keep running exactly as
-they do today, defined in `guix-dotfiles/modules/ryan-services/`:
-
-- **`home-pipewire-service-type`** (pipewire + wireplumber daemons)
-- **`home-dbus-service-type`** (per-user session dbus, since Guix has no
-  systemd --user to provide one)
-- **`downloads-garbage-collector-service-type`** (the weekly Downloads
-  cleanup shepherd timer)
-
-`home-gpg-agent-service-type` is the one service that *did* migrate cleanly:
-gpg-agent doesn't need a supervisor. It's socket-activated the same way on
-both platforms via the zsh init in `common.nix`
-(`gpgconf --launch gpg-agent` + exporting `SSH_AUTH_SOCK`), which is exactly
-what nix-dotfiles' darwin config already did. `linux.nix` points
-`services.gpg-agent.pinentry.package` at nixpkgs' `pinentry-qt` rather than
-Guix's system profile path, so it isn't cross-dependent on Guix.
-
-`home-spotifyd-service-type` is already commented out/disabled in
-`home-configuration.scm` - nothing to do there.
-
-## Dead/unused - candidates to delete from guix-dotfiles
-
-Found while comparing the two repos; none of these are referenced by
-anything active, so nothing carried them into nix-combined:
-
-- **fish** (`home-config/fish/`) - the `fish` package is commented out of
-  `home-configuration.scm`'s package list, but the dotfiles are still
-  checked in. Orphaned.
-- **`.nix-channels`** - classic (non-flake) nix-channel file. Now that
-  everything is flake-based, this shouldn't be needed.
-- **`icons/XCursor-Pro-Dark*`** - not referenced anywhere; only
-  `Bibata-Modern-*` appears in `hypr/hyprland.conf`.
-- **`fonts/Fira Code`, `fonts/Lilex`, `fonts/Monofur For Powerline`,
-  `fonts/AnonymicePro`, `fonts/MonofurNerdFont`** - superseded by
-  `nerd-fonts.{fira-code,lilex,anonymice,monofur}` from nixpkgs
-  (`linux.nix`'s `home.packages`), which ship the same font families.
-- **`home-spotifyd-service-type`** usage - already disabled.
-- **`alacritty`** - config exists in both repos, but no package installs the
-  `alacritty` binary in either the guix or the old nix-home-manager config.
-  `foot` is what's actually wired into the system (Guix package list,
-  kmscon login). I added `pkgs.alacritty` to `linux.nix` so the config isn't
-  dead weight, but confirm whether you still use it - if not, drop both the
-  package and `users/ryan/linux/alacritty/`.
-- **`sway` config** - not referenced by anything; Hyprland (via
-  home-manager) is the actual compositor in use.
-
-## Additive merges (things nix-dotfiles was missing, now fixed)
-
-- **aerc**: `signature_personal`, `signature_rit_personal`,
-  `templates/quoted_reply`, `templates/thanks` existed only in
-  guix-dotfiles' aerc config, even though `accounts.conf`/`aerc.conf`
-  already referenced them by path. Copied into `users/ryan/aerc/`.
-- **git**: `filter.lfs` and `[sendemail]` sections, merged into
-  `common.nix`'s `programs.git.settings`.
-- **ssh**: `linode`, `192.168.216.1` (legacy host key/pubkey algorithms),
-  the `KexAlgorithms` exclusion, and the `Match host * exec ...` line,
-  merged into `common.nix`'s `programs.ssh`.
-
-## Linux desktop stack re-pin (see also the flake-version conversation)
-
-The old `guix-dotfiles/home-config/nix-home-manager/flake.nix` pinned
-home-manager to a 2024 commit specifically so it'd match separately-pinned
-`hyprland`/`hyprlock`/`hyprpicker`/`wpaperd` flake inputs (plus a
-`ryan77627/nixGL` fork and a `rust-overlay` pin for wpaperd). Sharing
-`common.nix` with the darwin config (which tracks home-manager master)
-required moving Linux onto the same nixpkgs/home-manager as darwin.
-
-The good news: current nixpkgs-unstable now packages `hyprland` (0.52.2),
-`hyprlock`, `hypridle`, `hyprpicker`, `wpaperd`, `kanshi`, and `pyprland`
-directly, so those five extra flake inputs (and the rust-overlay pin) are
-gone entirely - `linux.nix` just uses `pkgs.hyprland` etc. Only two
-Linux-specific flake inputs remain in `flake.nix`:
-
-- `nixgl` (still needed - it exists specifically to patch Guix's mesa/GL
-  mismatch, unrelated to nixpkgs version)
-- `clipboard-sync` (not in nixpkgs)
-
-**Dropped**: the `hypr-dynamic-cursors` Hyprland plugin (animated cursor
-trails). It has no nixpkgs package and pinning a matching flake input just
-for one cosmetic plugin didn't seem worth the added re-pin risk. If you want
-it back, add it as a flake input with `inputs.nixpkgs.follows = "nixpkgs"`
-and pass it as a plugin in `wayland.windowManager.hyprland.plugins`.
-
-**Dropped**: `mozff` (firefox-nightly flake) - unused. The
-`firefox-nightly` module's package line was already commented out in the
-guix config; it just configures `programs.firefox` (nixpkgs' own package).
-
-**Cursor theme changed**: the vendored `Bibata-Modern-Classic-Hyprland` /
-`Bibata-Modern-daed9-v1.0.2-x11` asset had oddly-versioned internal theme
-names from however that release was originally packaged. Replaced with
-nixpkgs' `bibata-cursors` (`home.pointerCursor` in `linux.nix`) - the
-`HYPRCURSOR_THEME`/`XCURSOR_THEME` env vars in `hyprland.conf` were updated
-to the plain name `Bibata-Modern-Classic` to match. nixpkgs' build doesn't
-have a `-Hyprland`-suffixed hyprcursor variant; Hyprland falls back to
-rendering the XCursor theme directly, which works fine, just without the
-optional cleaner hyprcursor rendering path.
-
-## Verification note
-
-`homeConfigurations.ryan` was checked with:
-
-```
-nix eval --raw .#homeConfigurations.ryan.activationPackage.drvPath
-```
-
-which forces full module evaluation (catches missing options and
-darwin-only packages referenced on Linux) without building anything.
-
-`darwinConfigurations.RyanMac` could not be evaluated on this machine (no
-aarch64-darwin builder). It was verified by structural diff instead:
-`flake.nix`'s darwin-facing inputs/outputs, `hosts/RyanMac/configuration.nix`,
-and `modules/darwin/random-wallpaper` are unchanged from `nix-dotfiles`;
-`common.nix`/`darwin.nix` reproduce `nix-dotfiles/users/ryan/home.nix`
-line-for-line except where noted above. Please run
-`darwin-rebuild build --flake .#RyanMac` yourself before switching for real.