gnu/packages/emacs.scm (emacs)[native-search-paths]: Add a search-path for
tree-sitter grammars.
gnu/packages/aux-files/emacs/guix-emacs.el: Add directories from
TREE_SITTER_GRAMMAR_PATH to treesit-extra-load-path.
This is an experimental build system based on python-build-system
that implements PEP 517-compliant builds.
* doc/guix.texi (Build Systems): Add pyproject-build-system section.
* doc/contributing.texi (Python Modules): Mention pyproject.toml and the
PYTHON-TOOLCHAIN package, as well as differences to python-build-system.
* guix/build-system/pyproject.scm,
guix/build/pyproject-build-system.scm,
gnu/packages/aux-files/python/sanity-check-next.py,
gnu/packages/python-commencement.scm: New files.
* Makefile.am (MODULES): Register the new build systems.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add python-commencement.scm.
* gnu/packages/python.scm (python-sans-pip, python-sans-pip-wrapper): New
variables.
Co-authored-by: Marius Bakke <marius@gnu.org>
* gnu/packages/aux-files/emacs/guix-emacs.el
(guix-emacs-autoload-packages): Pass NOMESSAGE as t for 'load'.
Signed-off-by: 宋文武 <iyzsong@member.fsf.org>
This option that adds new hardware support appeared after the 5.17 release.
* gnu/packages/aux-files/linux-libre/5.17-arm.conf,
gnu/packages/aux-files/linux-libre/5.17-arm64.conf,
gnu/packages/aux-files/linux-libre/5.17-i686.conf,
gnu/packages/aux-files/linux-libre/5.17-x86_64.conf: Enable support for Realtek
Ethernet switch chips.
Without this it is apparently impossible to mount file systems with the
feature, which apparently some distributions do by default now.
podiki[m]> I have an sdcard that was formatted with ext4 casefold
[by Arch Linux], cannot be mounted
* gnu/packages/aux-files/linux-libre/5.10-arm.conf,
gnu/packages/aux-files/linux-libre/5.10-arm64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.15-arm.conf,
gnu/packages/aux-files/linux-libre/5.15-arm64.conf,
gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.16-arm.conf,
gnu/packages/aux-files/linux-libre/5.16-arm64.conf,
gnu/packages/aux-files/linux-libre/5.16-i686.conf,
gnu/packages/aux-files/linux-libre/5.16-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-arm.conf,
gnu/packages/aux-files/linux-libre/5.4-arm64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf:
Set CONFIG_UNICODE=y.
These changes broke the creation of the 'linux-modules-database' for all kernel
series besides 5.15, 5.4, and 5.10, like this:
------
gnu/build/linux-modules.scm:257:5: kernel module not found "framebuffer_coreboot" "/gnu/store/yff45fr6q93mw44zdql9ffr95zcvwxcn-linux-libre-4.9.299/lib/modules"
------
We should support the coreboot framebuffer, but we need to test that change more
completely before deploying it.
This effectively reverts the following commits:
1dfe8c3721 "gnu: linux-libre: Build simplefb into all x86{,_64} kernels."
bc09e7ab56 "gnu: linux-libre: Support the Coreboot framebuffer."
Fixes <https://issues.guix.gnu.org/52667> "System reconfiguration fails to build
linux-modules.drv".
Add the CONFIG_SND_EMU10K1=m and CONFIG_SND_EMU10K1_SEQ=m kernel options to
all of our x86 and ARM configurations. The change automated via:
$ git grep -rl CONFIG_SND_INDIGODJX | xargs grep -rL CONFIG_SND_EMU10K1=m \
| xargs sed '/CONFIG_SND_INDIGODJX=m/a\
CONFIG_SND_EMU10K1=m\nCONFIG_SND_EMU10K1_SEQ=m' -i
ZONE_DMA is still used by some kernel drivers such as older sound and network
cards; it was already enabled on ARM and for some i686 kernels. Enable it
everywhere for consistency. The change was automated with:
$ git grep -rl CONFIG_ZONE_DMA | \
xargs sed 's/# CONFIG_ZONE_DMA is not set/CONFIG_ZONE_DMA=y/' -i
* gnu/packages/aux-files/linux-libre/4.14-x86_64.conf: Enable CONFIG_ZONE_DMA.
* gnu/packages/aux-files/linux-libre/4.19-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/4.4-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/4.9-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.10-i686.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.10-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.15-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.16-i686.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.16-x86_64.conf: Likewise.
* gnu/packages/aux-files/linux-libre/5.4-x86_64.conf: Likewise.
Fixes <https://issues.guix.gnu.org/53329>, "Integrated keyboard doesn't work
(Lenovo N22)". Reported by Jack Ridehalgh <jack@ridehalgh.uk>.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf: Set
CONFIG_PINCTRL_CHERRYVIEW=y.
Instead of printing the "str()" representation of the excaption, print the
"repr()" representation. This will print the name of the exception and thus
ease understanding the actual error.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Fixes <https://issues.guix.gnu.org/52269>.
* gnu/packages/aux-files/python/sitecustomize.py: Use site.addsitedirs to add
the site directories; this takes care of the .pth files. Make sure the added
items still appear before Python's own 'site-packages' directory.
* gnu/packages/aux-files/renpy/renpy.in: New file.
* gnu/packages/game-development.scm (renpy)[install]: Use renpy.in with
substitute*.
* Makefile.am (AUX_FILES): Add it here.
This option defaults to "N", so this fix does not change the effective
kernel configuration.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf,
nu/packages/aux-files/linux-libre/5.15-x86_64.conf: Replace "unset" with "not
set".
This attempts to mitigate <https://issues.guix.gnu.org/52667>.
It makes linux-libre@5.15 consistent with older versions which do not
support a modular simplefb, allowing a single %base-initrd-modules
simple list for all of them.
Unlike CONFIG_FB_SIMPLE=m, CONFIG_FB_SIMPLE=y conflicts with
CONFIG_DRM_SIMPLEDRM, so the latter is now disabled. Let us hope it is
not missed.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Unset CONFIG_DRM_SIMPLEDRM to build in CONFIG_FB_SIMPLE=y.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Remove "simplefb".
Without this, the kernel cannot write to the display until the
full-featured driver module (often i915) is loaded from the root file
system.
If the root file system is encrypted, the initrd's passphrase prompt
won't make it to the screen, and the fully responsive system will appear
frozen whilst waiting for user input.
* gnu/packages/aux-files/linux-libre/4.4-i686.conf,
gnu/packages/aux-files/linux-libre/4.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.14-i686.conf,
gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Mark simple framebuffers as generic system ones and enable ‘Google’
firmware drivers to enable Coreboot table support and its dependent
framebuffer driver module.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Add the framebuffer_coreboot and simplefb modules on x86 systems.
* gnu/packages/aux-files/emacs/guix-emacs.el
(guix-emacs--non-core-load-path): New procedure.
(guix-emacs-autoload-packages): Use it here.
(guix-emacs-load-package-descriptors): New procedure.
* gnu/packages/emacs.scm (emacs)[install-site-start]: Install advice to run
‘guix-emacs-load-package-descriptors’.
Fixes <https://issues.guix.gnu.org/50105>.
* gnu/packages/aux-files/python/sitecustomize.py: Add a comment explaining the
general idea, and use sys.prefix instead of sys.executable.
(major_minor): Use the unpacking operator (*) to provide the arguments.
(site_packages_prefix): Use os.path.join to form the path.
(python_site): Likewise. Use sys.prefix instead of sys.executable.
(all_sites_raw): Split on os.path.pathsep.
(sys.path): Directly splice the result in the list.
Suggested-by: Hartmut Goebel <h.goebel@crazy-compilers.com>
Reported-by: Mathieu Othacehe <othacehe@gnu.org>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/packages/aux-files/python/sanity-check.py: Catch the less specific
EnvironmentError rather than FileNotFoundError as the latter is Python 3
only.
For more information about these configuration options, read
<https://www.kernel.org/doc/Documentation/cpu-freq/governors.txt> or the
document 'Documentation/admin-guide/pm/cpufreq.rst' in the linux-libre
source distribution.
* gnu/packages/aux-files/linux-libre/4.14-arm.conf,
gnu/packages/aux-files/linux-libre/4.14-i686.conf,
gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-arm.conf,
gnu/packages/aux-files/linux-libre/4.19-arm64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.9-i686.conf,
gnu/packages/aux-files/linux-libre/4.9-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.12-i686.conf,
gnu/packages/aux-files/linux-libre/5.12-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.13-i686.conf,
gnu/packages/aux-files/linux-libre/5.13-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-arm.conf,
gnu/packages/aux-files/linux-libre/5.4-arm64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf: Unset
'CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE' and set
'CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y'.
