* gnu/tests/linux-modules.scm
(run-loadable-kernel-modules-service-test): Actually load the modules
with kernel-module-loader-service-type. Use a singleton service instead
of defining a custom one.
* doc/guix.texi (Service Reference): To give an example of
linux-loadable-module-service-type use a singleton instead of defining a
new service.
Fixes <https://issues.guix.gnu.org/48739>. It may seem silly, but when not
realizing this firsthand, it can be quite surprising and thus not obvious to
troubleshoot. Thanks to Eric Brown for their insightful comments on the
tracker.
* doc/guix.texi (Running Guix in a VM): Add a note that networking support
must be available in the Guix System operating system declaration used for the
VM.
Reported by munksgaard on #guix.
* doc/guix.texi (Invoking guix pack): Replace "geiser" with
"emacs-geiser" in examples.
(Invoking guix refresh): Likewise.
* gnu/services/networking.scm (maybe-number?, maybe-string?): New procedures.
(<opendht-configuration>): New configuration record.
(%opendht-accounts): New variable.
(opendht-configuration->command-line-arguments): New procedure.
(opendht-shepherd-service, opendht-service-type): New variables.
* doc/guix.texi (Networking Services): Document the new service.
Also replace the obsolete 'guix system vm-image' command mention by the 'guix
system image'.
* doc/guix.texi (Running Guix in a VM): Remove VM image decompression
instruction.
<guix system vm-image>: Replace by 'guix system image'.
* gnu/system.scm (operating-system-directory-base-entries): Remove code
to handle generation of "kernel" for linux-libre kernels.
(operating-system-default-essential-services): Instantiate
linux-builder-service-type.
(package-for-kernel): Move ...
* gnu/services.scm: ... to here.
(linux-builder-service-type): New variable.
(linux-builder-configuration): New type.
(linux-loadable-module-service-type): New variable.
* gnu/tests/linux-modules.scm (run-loadable-kernel-modules-test): Move
code to ...
(run-loadable-kernel-modules-test-base): ... new procedure here.
(run-loadable-kernel-modules-service-test): New procedure.
(%test-loadable-kernel-modules-service-0): New variable.
(%test-loadable-kernel-modules-service-1): New variable.
(%test-loadable-kernel-modules-service-2): New variable.
* doc/guix.texi: Document linux-loadable-module-service-type.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
* gnu/services/mail.scm (protocol-configuration): Add an ‘imap-metadata?’
setting to enable IMAP METADATA support in the ‘imap’ protocol.
* doc/guix.texi (Mail Services): Document it.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
Regression introduced in 58805da44d.
* gnu/packages/linux.scm (rasdaemon)[description]: Avoid @acronym since
Guile's Texinfo module doesn't currently support @comma{}.
* doc/guix.texi (Linux Services): Use @comma{} within @acronym.
The qcow2 format supports compression, and the qcow2 type supported by 'guix
system image' produces compressed qcow2 images.
* Makefile.am (release): Do not re-compress the qcow2 VM images with xz.
* doc/guix.texi (Running Guix in a VM): Adjust VM image URL.
It was discussed on guix-devel that the manual only needs to have correct
instructions for the latest release.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID): Update to my public OpenPGP key.
(OPENPGP-SIGNING-KEY-URL): Adjust URL.
The upcoming 1.3.0 release will be signed with my OpenPGP key; subsequent
releases may also be.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID, OPENPGP-SIGNING-KEY-URL): Rename to...
(OPENPGP-SIGNING-KEY-ID-1, OPENPGP-SIGNING-KEY-URL-1): ... these,
respectively.
(OPENPGP-SIGNING-KEY-ID-2, OPENPGP-SIGNING-KEY-URL-2): New variables.
(Binary Installation): Adjust to cover for the new key.
(USB Stick and DVD Installation): Likewise.
(Invoking guix refresh): Adjust accordingly.
The xz-compressed image is 23% smaller than the original ISO image (with
built-in zlib compression), but the extra decompression step is
unconventional and often a hindrance for users. See discussion at
<https://lists.gnu.org/archive/html/guix-devel/2021-04/msg00497.html>.
* Makefile.am (release): Do not compress ISO images.
* doc/guix.texi (USB Stick and DVD Installation): Remove ".xz" suffix
from URL and file name.
(Copying to a USB Stick, Burning on a DVD): Remove introductory words,
@enumerate, and first item.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
The upcoming 1.3.0 release will be signed with my OpenPGP key; subsequent
releases may also be.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID, OPENPGP-SIGNING-KEY-URL): Rename to...
(OPENPGP-SIGNING-KEY-ID-1, OPENPGP-SIGNING-KEY-URL-1): ... these,
respectively.
(OPENPGP-SIGNING-KEY-ID-2, OPENPGP-SIGNING-KEY-URL-2): New variables.
(Binary Installation): Adjust to cover for the new key.
(USB Stick and DVD Installation): Likewise.
(Invoking guix refresh): Adjust accordingly.
This is a follow up to commit ebf5d77eab, which added the qcow2 file extension
to the VM image file name.
* doc/guix.texi (Running Guix in a VM): Update URL.
* gnu/services/databases.scm (mysql-configuration): Add extra-environment
(mysql-service): Use #:log-file and #:environment-variables
* doc/guix.texi: Document it.
Signed-off-by: Leo Prikler <leo.prikler@student.tugraz.at>
Adapting the snippet corresponding to the default value of the net-options
field of the hurd-vm-configuration record shown in the manual would easily
lead to a broken childhurd service, due to the presence of extraneous spaces
in the option string.
* doc/guix.texi (Virtualization Services)[hurd-vm-configuration]
<net-options>: Use string-append to properly form the option string.
This importer has suffered from bitrot and no longer works with current
Nix and Nixpkgs. See <https://bugs.gnu.org/32339> and
<https://bugs.gnu.org/36255>.
* guix/import/snix.scm, guix/scripts/import/nix.scm,
tests/snix.scm: Remove.
* Makefile.am (MODULES, SCM_TESTS): Remove them.
* guix/scripts/import.scm (importers): Remove "nix".
* build-aux/test-env.in: Remove NIXPKGS variable.
* configure.ac: Remove '--with-nixpkgs' option.
* doc/guix.texi (Invoking guix import): Remove bit about "guix import
nix".
* etc/completion/fish/guix.fish: Likewise.
Use the default client port rather than the default agent communication port
for the queue builds script.
* gnu/services/guix.scm (<guix-build-coordinator-queue-builds-configuration>):
Change coordinator default.
To the agent configuration.
* gnu/services/guix.scm (<guix-build-coordinator-agent-configuration>): New
field, max-1min-load-average.
(guix-build-coordinator-agent-configuration-max-1min-load-average): New
procedure.
(guix-build-coordinator-agent-shepherd-services): If set, include the
max-1min-load-average in the agent arguments.
* gnu/services/vpn.scm (<wireguard-peer>): Add 'keep-alive' field.
(wireguard-configuration-file): Use it.
* doc/guix.texi (VPN Services): Document it.
This importer has suffered from bitrot and no longer works with current
Nix and Nixpkgs. See <https://bugs.gnu.org/32339> and
<https://bugs.gnu.org/36255>.
* guix/import/snix.scm, guix/scripts/import/nix.scm,
tests/snix.scm: Remove.
* Makefile.am (MODULES, SCM_TESTS): Remove them.
* guix/scripts/import.scm (importers): Remove "nix".
* build-aux/test-env.in: Remove NIXPKGS variable.
* configure.ac: Remove '--with-nixpkgs' option.
* doc/guix.texi (Invoking guix import): Remove bit about "guix import
nix".
* etc/completion/fish/guix.fish: Likewise.
* gnu/services/databases.scm (mysql-configuration): Add extra-environment
(mysql-service): Use #:log-file and #:environment-variables
* doc/guix.texi: Document it.
Signed-off-by: Leo Prikler <leo.prikler@student.tugraz.at>
Fixes <https://bugs.gnu.org/46737>.
PostgreSQL running with a different socket directory to the default one in the
package itself breaks some services, this commit restores the previous
behaviour where PostgreSQL by default will run with a socket directory that
matches the default used by PostgreSQL packaged for Guix.
Switching to a different default value can happen, but only alongside changing
the PostgreSQL package.
* gnu/services/databases.scm (<postgresql-config-file>)[socket-directory]:
Change default to #false.
* doc/guix.texi (Database Services): Update documentation, and specify a
different value for disabling connections via sockets.
* gnu/tests/guix.scm (%guix-data-service-os): Use default PostgreSQL
behaviour.
* gnu/tests/monitoring.scm (%zabbix-os): Likewise.
* gnu/tests/web.scm (patchwork-os): Likewise.
Signed-off-by: Leo Famulari <leo@famulari.name>
Before this change, the 'gnu-build-system' phases were listed in the
"Build Systems" section, and then summarized in the "Build Phases"
section. This moves everything to "Build Phases".
* doc/guix.texi (Build Systems): Move phase table to...
(Build Phases): ... here. Rearrange surrounding text.
This allows importing packages with complicated version specific dependency
chains without the package symbol names colliding.
* doc/guix.texi (Invoking guix import): Document the --pin-versions option.
Mention that a specific version can be imported. Remove the experimental
warning.
* guix/import/go.scm (go-module->guix-package-name)[version]: Add optional
argument. Rewrite the character translation in terms of string-map.
(go-module->guix-package): Conditionally use dependencies whose symbol include
their version, based no the value of the PIN-VERSIONS? argument.
* guix/import/utils.scm (package->definition): Add a new case where the full
version string is appended to the package symbol.
* guix/scripts/import.scm (guix-import): Correctly print forms starting
with '(define-public [...]'.
* guix/scripts/import/go.scm (guix-import-go): Conditionally include the
version in the package symbols defined.
Otherwise, the shell tries to perform pattern-matching based on the "?"
character.
Reported by nij in #guix.
* doc/guix.texi (Binary Installation): Add quotes around OPENPGP-SIGNING-KEY-URL.
This updater currently covers 2.4% of the packages.
* guix/gnu-maintenance.scm (latest-sourceforge-release): New procedure.
(%sourceforge-updater): New variable.
* doc/guix.texi (Invoking guix refresh): Document it.
That way, the default config with (advertises? #t) and without a cache
will offer zstd-compressed substitutes, which should lead to much higher
throughput than gzip.
* gnu/services/base.scm (default-compression): When
'guix-publish-configuration-cache' returns true, use higher level
compression ratios. Add "zstd".
* doc/guix.texi (Base Services): Mention zstd.
With this change, each substitute occupies a single line of
output (instead of two) when using '-v1', the default for 'guix package'
& co.
* guix/status.scm (print-build-event): Add #:print-urls? and honor it.
(print-build-event/quiet): Pass #:print-urls? #f.
(print-build-event/quiet-with-urls): New procedure.
(logger-for-level): Add case for LEVEL 2.
* doc/guix.texi (Common Build Options): Adjust '--verbosity'
documentation.
This is no longer needed as the Cuirass specification mechanism has been
rewritten.
* doc/guix.texi (Continuous Integration): Remove Simple Cuirass section.
* gnu/packages/julia-xyz.scm (julia-jllwrappers): New variable.
* doc/guix.texi (julia-build-system): Document how to use jllwrappers to use
to guix binary packages.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
References:
https://sysctl-explorer.net/fs/protected_hardlinks/https://sysctl-explorer.net/fs/protected_symlinks/
* gnu/services/sysctl.scm (%default-sysctl-settings): New public variable.
(<sysctl-configuration>): Use %default-sysctl-settings as the default value.
* gnu/services/base.scm (%base-services): Add sysctl-service-type.
* doc/guix.texi (Miscellaneous Services): Document the new defaults.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This brings total updater coverage, as reported by 'guix refresh
--list-updaters', from 78% to 88.3%. Among many other things, it covers
freedesktop.org packages.
* guix/gnu-maintenance.scm (html-updatable-package?)
(latest-html-updatable-release): New procedures.
(%generic-html-updater): New variable.
* doc/guix.texi (Invoking guix refresh): Document it.
Fixes <https://bugs.gnu.org/46803>.
Reported by Luis Felipe <luis.felipe.la@protonmail.com>.
* doc/guix.texi (Getting Started): Introduce the term "profile".
(Invoking guix package): Likewise.
mongodb 3.4.10 has unpatched CVEs and mongodb 3.4.24 has some files in the
release tarball under the SSPL, therefore we cannot provide mongodb while
upholding to good security standards.
It turns out feff80cec3 was right since while
the main license file wasnt altered to SSPL, some files in the tree contain
SSPL headers.
* gnu/packages/databases.scm (go-gopkg.in-mgo.v2): Remove.
* gnu/packages/databases.scm (mongo-tools): Remove.
* doc/guix.texi (mongodb-service-type): Remove.
* gnu/tests/databases.scm (%test-mongodb, %mongodb-os, run-mongodb-test):
Remove.
* gnu/services/databases.scm (mongodb-configuration, mongodb-configuration?,
mongodb-configuration-mongodb, mongodb-configuration-config-file,
mongodb-configuration-data-directory, mongodb-service-type,
%default-mongodb-configuration-file, %mongodb-accounts, mongodb-activation,
mongodb-shepherd-service): Remove.
* gnu/packages/databases.scm (mongodb): Remove.
Fixes <https://issues.guix.gnu.org/36117>.
Before this change, the 'binfmt_misc' entries registered for QEMU would not be
usable in container contexts outside of guix-daemon (without manually bind
mounting file names).
For example:
$ docker run --rm arm32v7/debian true
standard_init_linux.go:207: exec user process caused "no such file or directory"
After this change, any container can make use of the QEMU binfmt_misc
registrations, as their corresponding QEMU static binaries are fully
pre-loaded by the kernel.
* gnu/services/virtualization.scm (<qemu-platform>): Define using
'define-record-type*'.
[flags]: New field, which defaults to "F" (fix binary).
(%i386, %i486, %alpha, %arm, %armeb, %sparc, %sparc32plus, %ppc, %ppc64)
(%ppc64le, %m68k, %mips, %mipsel, %mipsn32, %mipsn32el, %mips64, %mips64el)
(%riscv32, %riscv64, %sh4, %sh4eb, %s390x, %aarch64, %hppa): Adjust.
(qemu-binfmt-guix-chroot): Remove variable.
(qemu-binfmt-service-type): Remove the qemu-binfmt-guix-chroot extension.
* gnu/services/qemu-binfmt (qemu-platform->binfmt): Use the static output of
QEMU.
* doc/contributing.texi (Submitting Patches): Update doc.
* doc/guix.texi (Virtualization Services): Update doc.
* gnu/services/guix.scm (guix-build-coordinator-agent-dynamic-auth-with-file,
guix-build-coordinator-agent-dynamic-auth-with-filen?,
guix-build-coordinator-agent-dynamic-auth-with-file-agent-name,
guix-build-coordinator-agent-dynamic-auth-with-file-token-file): New procedures.
(guix-build-coordinator-agent-shepherd-services): Handle new dynamic auth with
file record.
* doc/guix.texi (Guix Build Coordinator): Document the new dynamic auth with
file record.
A new authentication approach has been added to the coordinator, so to better
represent the options, this commit changes the configuration to accept
different records, each for different authentication approaches.
* gnu/services/guix.scm (guix-build-coordinator-agent-configuration-uuid,
guix-build-coordinator-agent-configuration-password,
guix-build-coordinator-agent-configuration-password-file): Removed
procedures.
(guix-build-coordinator-agent-password-auth,
guix-build-coordinator-agent-password-auth?,
guix-build-coordinator-agent-password-auth-uuid,
guix-build-coordinator-agent-password-auth-password,
guix-build-coordinator-agent-password-file-auth,
guix-build-coordinator-agent-password-file-auth?,
guix-build-coordinator-agent-password-file-auth-uuid,
guix-build-coordinator-agent-password-file-auth-password-file): New
procedures.
(guix-build-coordinator-agent-shepherd-services): Adjust to handle the
authentication field and it's possible record values.
* doc/guix.texi (Guix Build Coordinator): Update documentation.
* doc/guix.texi (sane-service-type): Move from between documentation
about geoclue, expand slightly.
(sane-backends-minimal): New description.
(sane-backends): New description, new example.
Signed-off-by: Nicolas Goaziou <mail@nicolasgoaziou.fr>
Instead of returning multiple services in simple-cuirass-services, rely on the
instantiate-missing-services procedure to instantiate postgresql and
postgresql-role-service-type when missing.
Turn simple-cuirass-services procedure into
simple-cuirass-configuration->specs, that takes a simple-cuirass-configuration
record and returns a Cuirass specification.
Suggested-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/cuirass.scm (%default-cuirass-config): Remove it.
(simple-cuirass-services): Rename it to ...
(simple-cuirass-configuration->specs): ... this procedure.
* gnu/tests/cuirass.scm (cuirass-services): Remove postgresql and
postgresql-role services that are automatically instantiated.
(simple-cuirass-service): New variable.
(%cuirass-simple-test): Adapt it to use simple-cuirass-configuration->specs
instead of simple-cuirass-services.
* doc/guix.texi (Simple Cuirass): Update it.
* gnu/services/cuirass.scm (<build-manifest>,
<simple-cuirass-configuration>): New records.
(build-manifest, build-manifest?, simple-cuirass-configuration,
simple-cuirass-configuration?, simple-cuirass-services): New procedures.
(%default-cuirass-config): New variable.
* gnu/tests/cuirass.scm (%cuirass-simple-test): New variable.
* doc/guix.texi (Continuous Integration): Document it.
* doc/guix.texi (Base Services)[pam-limits-service]: Add an example and
explanation of how the 'nofile', or open file descriptors value, can be
configured.
Remove the 'vm-image' command that has been superseded by the 'image'
command.
* gnu/system/vm.scm (system-qemu-image): Remove it.
* guix/scripts/system.scm (system-derivation-for-action): Mark 'vm-image'
command as deprecated and use the image API to produce the VM image.
(perform-action, show-help): Adapt accordingly.
* tests/guix-system.sh: Ditto.
* doc/guix.texi (Invoking guix system,
Running Guix in a VM): Ditto.
* etc/completion/fish/guix.fish: Ditto.
* etc/completion/zsh/_guix: Ditto.
* gnu/services/vpn.scm (wireguard-peer, wireguard-configuration): New records.
(wireguard-service-type): New variable.
* doc/guix.texi (VPN Services): Document it.
* gnu/services/web.scm (<agate-configuration>): New record type.
(agate-accounts, agate-shepherd-service): New procedures.
(agate-service-type): New variable.
* doc/guix.texi (Web Services): Document it.
Signed-off-by: Nicolas Goaziou <mail@nicolasgoaziou.fr>
* doc/guix.texi (Invoking guix environment): Explain how to exit and clean up
a Guix environment.
The current documentation doesn't explain how to exit an environment or how to
remove the packages after exiting.
Signed-off-by: Nicolas Goaziou <mail@nicolasgoaziou.fr>
