Fixes <https://bugs.gnu.org/47428>.
Reported by Leo Famulari <leo@famulari.name>.
* doc/build.scm (translated-texi-manuals): Explicitly use 'guile-3.0-latest'.
Since the update to the 2.6.2 release, the closure size of zile has
increased. Switch to mg which is lighter.
* gnu/system.scm (%base-packages-interactive): Replace zile by mg.
* doc/guix.texi (Proceeding with the Installation,
Using the Configuration System): Adapt those sections.
* guix/build/utils.scm (search-input-directory): New procedure.
* doc/guix.texi (Build Utilities): Document it next to
'search-input-file'. Tweak wording.
This is a follow-up to c2ff06e5e4, in which
a link to the cookbook was added using a different name than the actual
section.
* doc/guix.texi (Using the Configuration System): Fix broken link to cookbook.
This is a follow-up to the discussion in <https://bugs.gnu.org/48974>.
* doc/guix-cookbook.texi (System Configuration): Add a brief guide that
explains auto login a user to one TTY.
* doc/guix.texi (System Services): Add an texinfo anchor, so that the cookbook
entry "Auto Login a User to a Specific TTY" can refer back to the precise
point that the GNU Guix Reference manual. Also add a reference to the
cookbook that shows how to auto login a specific user to one TTY.
Signed-off-by: Leo Prikler <leo.prikler@student.tugraz.at>
It will be used in the 'optional-tests' linter.
* guix/gexp.scm (gexp->approximate-sexp): New procedure.
* tests/gexp.scm
("no references", "unquoted gexp", "unquoted gexp (native)")
("spliced gexp", "unspliced gexp, approximated")
("unquoted gexp, approximated"): Test it.
* doc/gexp.scm ("G-Expressions"): Document it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* .dir-locals.el (scheme-mode)[gexp->derivation]: Define indentation rule.
* guix/scripts/pack.scm (debian-archive): New procedure.
(%formats): Register the new deb format.
(show-formats): Add it to the usage string.
* tests/pack.scm (%ar-bootstrap): New variable.
(deb archive with symlinks): New test.
* doc/guix.texi (Invoking guix pack): Document it.
* NEWS: Add news entry.
* gnu/services/vpn.scm (<strongswan-configuration>): New record type.
(charon-plugins, strongswan-configuration-file)
(strongswan-shepherd-service, strongswan-service-type): New variables.
* doc/guix.tex (VPN Services): Document them all.
* doc/contributing.texi (Contributing): Update the short description of the
"Tracking Bugs and Patches" chapter in the menu.
(Tracking Bugs and Patches): Split this section into three new subsections,
titled "The Issue Tracker", "Debbugs User Interfaces", and "Debbugs Usertags".
Of these, only the "Debbugs Usertags" is actually new.
For some time, OpenSSH's option 'PermitRootLogin' has deprecated the
ambiguous argument 'without-password' with 'prohibit-password'.
* doc/guix.texi (Network Services): Replace 'without-password by
'prohibit-password.
* gnu/machine/digital-ocean.scm (guix-infect): Change system
configuration to use 'prohibit-password.
* gnu/services/ssh.scm (openssh-configuration): Change comment to use
'prohibit-password.
(openssh-config-file): Add support for 'prohibit-password to
'permit-root-login'. Warn about deprecated 'without-password usage.
* gnu/tests/ganeti.scm (%ganeti-os): Replace 'without-password by
'prohibit-password.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
Note: this merge actually changes the 'curl' and 'python-attrs' derivations,
as part of solving caf4a7a277 and
12964df69a respectively.
4604d43c0e (gnu: gnutls@3.6.16: Fix cross-compilation.) was ignored because it
cannot currently be tested.
Conflicts:
gnu/local.mk
gnu/packages/aidc.scm
gnu/packages/boost.scm
gnu/packages/curl.scm
gnu/packages/nettle.scm
gnu/packages/networking.scm
gnu/packages/python-xyz.scm
gnu/packages/tls.scm
In addition to substitutes from ci.guix.gnu.org. There are more changes that
can be made in the future, but these changes seem like a good start.
* config-daemon.ac (guix_substitute_urls): Add https://bordeaux.guix.gnu.org.
* guix/scripts/substitute.scm (%default-substitute-urls): Add
http://bordeaux.guix.gnu.org.
* guix/store.scm (%default-substitute-urls): Add bordeaux.guix.gnu.org.
* doc/guix.texi: Adjust accordingly.
* doc/contributing.texi: Adjust accordingly.
* doc/guix.texi (Globally-Visible Packages): Change "bind" variable
name to the actual variable name, "isc-bind".
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
The procedure ‘which’ from (guix build utils)
is used for two different purposes:
1. for finding the absolute file name of a binary
that needs to run during the build process
2. for finding the absolute file name of a binary,
for the target system (as in --target=TARGET),
e.g. for substituting sh->/gnu/store/.../bin/sh,
python->/gnu/store/.../bin/python.
When compiling natively (target=#f in Guix parlance),
this is perfectly fine.
However, when cross-compiling, there is a problem.
"which" looks in $PATH for binaries. That's good for purpose (1),
but incorrect for (2), as the $PATH contains binaries from native-inputs
instead of inputs.
This commit defines a ‘search-input-file’ procedure. It functions
like 'which', but instead of searching in $PATH, it searches in
the 'inputs' of the build phase, which must be passed to
‘search-input-file’ as an argument. Also, the file name must
include "bin/" or "sbin/" as appropriate.
* guix/build/utils.scm (search-input-file): New procedure.
* tests/build-utils.scm
("search-input-file: exception if not found")
("search-input-file: can find if existent"): Test it.
* doc/guix.texi (File Search): Document it.
Partially-Fixes: <https://issues.guix.gnu.org/47869>
Co-Authored-By: Ludovic Courtès <ludo@gnu.org>
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Networking Services): Allow established and related incoming
connections in example iptables configuration.
Signed-off-by: Arun Isaac <arunisaac@systemreboot.net>
* gnu/tests/linux-modules.scm
(run-loadable-kernel-modules-service-test): Actually load the modules
with kernel-module-loader-service-type. Use a singleton service instead
of defining a custom one.
* doc/guix.texi (Service Reference): To give an example of
linux-loadable-module-service-type use a singleton instead of defining a
new service.
Fixes <https://issues.guix.gnu.org/48739>. It may seem silly, but when not
realizing this firsthand, it can be quite surprising and thus not obvious to
troubleshoot. Thanks to Eric Brown for their insightful comments on the
tracker.
* doc/guix.texi (Running Guix in a VM): Add a note that networking support
must be available in the Guix System operating system declaration used for the
VM.
Reported by munksgaard on #guix.
* doc/guix.texi (Invoking guix pack): Replace "geiser" with
"emacs-geiser" in examples.
(Invoking guix refresh): Likewise.
* gnu/services/networking.scm (maybe-number?, maybe-string?): New procedures.
(<opendht-configuration>): New configuration record.
(%opendht-accounts): New variable.
(opendht-configuration->command-line-arguments): New procedure.
(opendht-shepherd-service, opendht-service-type): New variables.
* doc/guix.texi (Networking Services): Document the new service.
Also replace the obsolete 'guix system vm-image' command mention by the 'guix
system image'.
* doc/guix.texi (Running Guix in a VM): Remove VM image decompression
instruction.
<guix system vm-image>: Replace by 'guix system image'.
* gnu/system.scm (operating-system-directory-base-entries): Remove code
to handle generation of "kernel" for linux-libre kernels.
(operating-system-default-essential-services): Instantiate
linux-builder-service-type.
(package-for-kernel): Move ...
* gnu/services.scm: ... to here.
(linux-builder-service-type): New variable.
(linux-builder-configuration): New type.
(linux-loadable-module-service-type): New variable.
* gnu/tests/linux-modules.scm (run-loadable-kernel-modules-test): Move
code to ...
(run-loadable-kernel-modules-test-base): ... new procedure here.
(run-loadable-kernel-modules-service-test): New procedure.
(%test-loadable-kernel-modules-service-0): New variable.
(%test-loadable-kernel-modules-service-1): New variable.
(%test-loadable-kernel-modules-service-2): New variable.
* doc/guix.texi: Document linux-loadable-module-service-type.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
* gnu/services/mail.scm (protocol-configuration): Add an ‘imap-metadata?’
setting to enable IMAP METADATA support in the ‘imap’ protocol.
* doc/guix.texi (Mail Services): Document it.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
Regression introduced in 58805da44d.
* gnu/packages/linux.scm (rasdaemon)[description]: Avoid @acronym since
Guile's Texinfo module doesn't currently support @comma{}.
* doc/guix.texi (Linux Services): Use @comma{} within @acronym.
The qcow2 format supports compression, and the qcow2 type supported by 'guix
system image' produces compressed qcow2 images.
* Makefile.am (release): Do not re-compress the qcow2 VM images with xz.
* doc/guix.texi (Running Guix in a VM): Adjust VM image URL.
It was discussed on guix-devel that the manual only needs to have correct
instructions for the latest release.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID): Update to my public OpenPGP key.
(OPENPGP-SIGNING-KEY-URL): Adjust URL.
The upcoming 1.3.0 release will be signed with my OpenPGP key; subsequent
releases may also be.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID, OPENPGP-SIGNING-KEY-URL): Rename to...
(OPENPGP-SIGNING-KEY-ID-1, OPENPGP-SIGNING-KEY-URL-1): ... these,
respectively.
(OPENPGP-SIGNING-KEY-ID-2, OPENPGP-SIGNING-KEY-URL-2): New variables.
(Binary Installation): Adjust to cover for the new key.
(USB Stick and DVD Installation): Likewise.
(Invoking guix refresh): Adjust accordingly.
The xz-compressed image is 23% smaller than the original ISO image (with
built-in zlib compression), but the extra decompression step is
unconventional and often a hindrance for users. See discussion at
<https://lists.gnu.org/archive/html/guix-devel/2021-04/msg00497.html>.
* Makefile.am (release): Do not compress ISO images.
* doc/guix.texi (USB Stick and DVD Installation): Remove ".xz" suffix
from URL and file name.
(Copying to a USB Stick, Burning on a DVD): Remove introductory words,
@enumerate, and first item.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
This change is so that the list of translated Texinfo files remain in sync
with the list of supported (translated) languages.
* doc/local.mk (MANUAL_LANGUAGES, COOKBOOK_LANGUAGES): New variables.
(lang_to_texinfos): New function.
(TRANSLATED_INFO): Use it to construct the list of files.
Modified-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
The upcoming 1.3.0 release will be signed with my OpenPGP key; subsequent
releases may also be.
* doc/guix.texi (OPENPGP-SIGNING-KEY-ID, OPENPGP-SIGNING-KEY-URL): Rename to...
(OPENPGP-SIGNING-KEY-ID-1, OPENPGP-SIGNING-KEY-URL-1): ... these,
respectively.
(OPENPGP-SIGNING-KEY-ID-2, OPENPGP-SIGNING-KEY-URL-2): New variables.
(Binary Installation): Adjust to cover for the new key.
(USB Stick and DVD Installation): Likewise.
(Invoking guix refresh): Adjust accordingly.
This is a follow up to commit ebf5d77eab, which added the qcow2 file extension
to the VM image file name.
* doc/guix.texi (Running Guix in a VM): Update URL.
* gnu/services/databases.scm (mysql-configuration): Add extra-environment
(mysql-service): Use #:log-file and #:environment-variables
* doc/guix.texi: Document it.
Signed-off-by: Leo Prikler <leo.prikler@student.tugraz.at>
Adapting the snippet corresponding to the default value of the net-options
field of the hurd-vm-configuration record shown in the manual would easily
lead to a broken childhurd service, due to the presence of extraneous spaces
in the option string.
* doc/guix.texi (Virtualization Services)[hurd-vm-configuration]
<net-options>: Use string-append to properly form the option string.
This importer has suffered from bitrot and no longer works with current
Nix and Nixpkgs. See <https://bugs.gnu.org/32339> and
<https://bugs.gnu.org/36255>.
* guix/import/snix.scm, guix/scripts/import/nix.scm,
tests/snix.scm: Remove.
* Makefile.am (MODULES, SCM_TESTS): Remove them.
* guix/scripts/import.scm (importers): Remove "nix".
* build-aux/test-env.in: Remove NIXPKGS variable.
* configure.ac: Remove '--with-nixpkgs' option.
* doc/guix.texi (Invoking guix import): Remove bit about "guix import
nix".
* etc/completion/fish/guix.fish: Likewise.
Use the default client port rather than the default agent communication port
for the queue builds script.
* gnu/services/guix.scm (<guix-build-coordinator-queue-builds-configuration>):
Change coordinator default.
To the agent configuration.
* gnu/services/guix.scm (<guix-build-coordinator-agent-configuration>): New
field, max-1min-load-average.
(guix-build-coordinator-agent-configuration-max-1min-load-average): New
procedure.
(guix-build-coordinator-agent-shepherd-services): If set, include the
max-1min-load-average in the agent arguments.
As discussed on #guix IRC, several of us struggle to reliably choose the
right option based on the old labels:
https://logs.guix.gnu.org/guix/2021-04-20.log#182137
* doc/build.scm (html-manual-indexes): Try to distinguish between the
two options more clearly.
* gnu/services/vpn.scm (<wireguard-peer>): Add 'keep-alive' field.
(wireguard-configuration-file): Use it.
* doc/guix.texi (VPN Services): Document it.
This importer has suffered from bitrot and no longer works with current
Nix and Nixpkgs. See <https://bugs.gnu.org/32339> and
<https://bugs.gnu.org/36255>.
* guix/import/snix.scm, guix/scripts/import/nix.scm,
tests/snix.scm: Remove.
* Makefile.am (MODULES, SCM_TESTS): Remove them.
* guix/scripts/import.scm (importers): Remove "nix".
* build-aux/test-env.in: Remove NIXPKGS variable.
* configure.ac: Remove '--with-nixpkgs' option.
* doc/guix.texi (Invoking guix import): Remove bit about "guix import
nix".
* etc/completion/fish/guix.fish: Likewise.
* gnu/services/databases.scm (mysql-configuration): Add extra-environment
(mysql-service): Use #:log-file and #:environment-variables
* doc/guix.texi: Document it.
Signed-off-by: Leo Prikler <leo.prikler@student.tugraz.at>
Fixes <https://bugs.gnu.org/46737>.
PostgreSQL running with a different socket directory to the default one in the
package itself breaks some services, this commit restores the previous
behaviour where PostgreSQL by default will run with a socket directory that
matches the default used by PostgreSQL packaged for Guix.
Switching to a different default value can happen, but only alongside changing
the PostgreSQL package.
* gnu/services/databases.scm (<postgresql-config-file>)[socket-directory]:
Change default to #false.
* doc/guix.texi (Database Services): Update documentation, and specify a
different value for disabling connections via sockets.
* gnu/tests/guix.scm (%guix-data-service-os): Use default PostgreSQL
behaviour.
* gnu/tests/monitoring.scm (%zabbix-os): Likewise.
* gnu/tests/web.scm (patchwork-os): Likewise.
Signed-off-by: Leo Famulari <leo@famulari.name>
Before this change, the 'gnu-build-system' phases were listed in the
"Build Systems" section, and then summarized in the "Build Phases"
section. This moves everything to "Build Phases".
* doc/guix.texi (Build Systems): Move phase table to...
(Build Phases): ... here. Rearrange surrounding text.
This allows importing packages with complicated version specific dependency
chains without the package symbol names colliding.
* doc/guix.texi (Invoking guix import): Document the --pin-versions option.
Mention that a specific version can be imported. Remove the experimental
warning.
* guix/import/go.scm (go-module->guix-package-name)[version]: Add optional
argument. Rewrite the character translation in terms of string-map.
(go-module->guix-package): Conditionally use dependencies whose symbol include
their version, based no the value of the PIN-VERSIONS? argument.
* guix/import/utils.scm (package->definition): Add a new case where the full
version string is appended to the package symbol.
* guix/scripts/import.scm (guix-import): Correctly print forms starting
with '(define-public [...]'.
* guix/scripts/import/go.scm (guix-import-go): Conditionally include the
version in the package symbols defined.
Otherwise, the shell tries to perform pattern-matching based on the "?"
character.
Reported by nij in #guix.
* doc/guix.texi (Binary Installation): Add quotes around OPENPGP-SIGNING-KEY-URL.
This updater currently covers 2.4% of the packages.
* guix/gnu-maintenance.scm (latest-sourceforge-release): New procedure.
(%sourceforge-updater): New variable.
* doc/guix.texi (Invoking guix refresh): Document it.
The previous instructions were correct, but we got too many bug reports
with a root cause of "did not build Guix yet".
Other parts of the manual already instruct `make && make check`, so this
makes the treatment of building Guix more consistent, too.
* doc/contributing.texi (Building from Git): Instruct the user to run
`make` when building Guix.
That way, the default config with (advertises? #t) and without a cache
will offer zstd-compressed substitutes, which should lead to much higher
throughput than gzip.
* gnu/services/base.scm (default-compression): When
'guix-publish-configuration-cache' returns true, use higher level
compression ratios. Add "zstd".
* doc/guix.texi (Base Services): Mention zstd.
With this change, each substitute occupies a single line of
output (instead of two) when using '-v1', the default for 'guix package'
& co.
* guix/status.scm (print-build-event): Add #:print-urls? and honor it.
(print-build-event/quiet): Pass #:print-urls? #f.
(print-build-event/quiet-with-urls): New procedure.
(logger-for-level): Add case for LEVEL 2.
* doc/guix.texi (Common Build Options): Adjust '--verbosity'
documentation.
This is no longer needed as the Cuirass specification mechanism has been
rewritten.
* doc/guix.texi (Continuous Integration): Remove Simple Cuirass section.
* gnu/packages/julia-xyz.scm (julia-jllwrappers): New variable.
* doc/guix.texi (julia-build-system): Document how to use jllwrappers to use
to guix binary packages.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
This hotfix package is no longer necessary as the ability to parameterize the
way htmlprag tokenizes HTML was added in guile-lib 0.2.7.
* doc/build.scm (guile-lib/htmlprag-fixed): Remove variable.
(html-manual-identifier-index): Replace guile-lib/htmlprag-fixed by guile-lib,
and make set the %strict-tokenizer? parameter to #t.
(syntax-highlighted-html): Likewise.
For more context, see the discussion in <https://bugs.gnu.org/47111>.
* doc/contributing.texi (Commit Access): Add paragraph about removing
inactive committers.
References:
https://sysctl-explorer.net/fs/protected_hardlinks/https://sysctl-explorer.net/fs/protected_symlinks/
* gnu/services/sysctl.scm (%default-sysctl-settings): New public variable.
(<sysctl-configuration>): Use %default-sysctl-settings as the default value.
* gnu/services/base.scm (%base-services): Add sysctl-service-type.
* doc/guix.texi (Miscellaneous Services): Document the new defaults.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This brings total updater coverage, as reported by 'guix refresh
--list-updaters', from 78% to 88.3%. Among many other things, it covers
freedesktop.org packages.
* guix/gnu-maintenance.scm (html-updatable-package?)
(latest-html-updatable-release): New procedures.
(%generic-html-updater): New variable.
* doc/guix.texi (Invoking guix refresh): Document it.
Fixes <https://bugs.gnu.org/46803>.
Reported by Luis Felipe <luis.felipe.la@protonmail.com>.
* doc/guix.texi (Getting Started): Introduce the term "profile".
(Invoking guix package): Likewise.
mongodb 3.4.10 has unpatched CVEs and mongodb 3.4.24 has some files in the
release tarball under the SSPL, therefore we cannot provide mongodb while
upholding to good security standards.
It turns out feff80cec3 was right since while
the main license file wasnt altered to SSPL, some files in the tree contain
SSPL headers.
* gnu/packages/databases.scm (go-gopkg.in-mgo.v2): Remove.
* gnu/packages/databases.scm (mongo-tools): Remove.
* doc/guix.texi (mongodb-service-type): Remove.
* gnu/tests/databases.scm (%test-mongodb, %mongodb-os, run-mongodb-test):
Remove.
* gnu/services/databases.scm (mongodb-configuration, mongodb-configuration?,
mongodb-configuration-mongodb, mongodb-configuration-config-file,
mongodb-configuration-data-directory, mongodb-service-type,
%default-mongodb-configuration-file, %mongodb-accounts, mongodb-activation,
mongodb-shepherd-service): Remove.
* gnu/packages/databases.scm (mongodb): Remove.
Fixes <https://issues.guix.gnu.org/36117>.
Before this change, the 'binfmt_misc' entries registered for QEMU would not be
usable in container contexts outside of guix-daemon (without manually bind
mounting file names).
For example:
$ docker run --rm arm32v7/debian true
standard_init_linux.go:207: exec user process caused "no such file or directory"
After this change, any container can make use of the QEMU binfmt_misc
registrations, as their corresponding QEMU static binaries are fully
pre-loaded by the kernel.
* gnu/services/virtualization.scm (<qemu-platform>): Define using
'define-record-type*'.
[flags]: New field, which defaults to "F" (fix binary).
(%i386, %i486, %alpha, %arm, %armeb, %sparc, %sparc32plus, %ppc, %ppc64)
(%ppc64le, %m68k, %mips, %mipsel, %mipsn32, %mipsn32el, %mips64, %mips64el)
(%riscv32, %riscv64, %sh4, %sh4eb, %s390x, %aarch64, %hppa): Adjust.
(qemu-binfmt-guix-chroot): Remove variable.
(qemu-binfmt-service-type): Remove the qemu-binfmt-guix-chroot extension.
* gnu/services/qemu-binfmt (qemu-platform->binfmt): Use the static output of
QEMU.
* doc/contributing.texi (Submitting Patches): Update doc.
* doc/guix.texi (Virtualization Services): Update doc.
* gnu/services/guix.scm (guix-build-coordinator-agent-dynamic-auth-with-file,
guix-build-coordinator-agent-dynamic-auth-with-filen?,
guix-build-coordinator-agent-dynamic-auth-with-file-agent-name,
guix-build-coordinator-agent-dynamic-auth-with-file-token-file): New procedures.
(guix-build-coordinator-agent-shepherd-services): Handle new dynamic auth with
file record.
* doc/guix.texi (Guix Build Coordinator): Document the new dynamic auth with
file record.
A new authentication approach has been added to the coordinator, so to better
represent the options, this commit changes the configuration to accept
different records, each for different authentication approaches.
* gnu/services/guix.scm (guix-build-coordinator-agent-configuration-uuid,
guix-build-coordinator-agent-configuration-password,
guix-build-coordinator-agent-configuration-password-file): Removed
procedures.
(guix-build-coordinator-agent-password-auth,
guix-build-coordinator-agent-password-auth?,
guix-build-coordinator-agent-password-auth-uuid,
guix-build-coordinator-agent-password-auth-password,
guix-build-coordinator-agent-password-file-auth,
guix-build-coordinator-agent-password-file-auth?,
guix-build-coordinator-agent-password-file-auth-uuid,
guix-build-coordinator-agent-password-file-auth-password-file): New
procedures.
(guix-build-coordinator-agent-shepherd-services): Adjust to handle the
authentication field and it's possible record values.
* doc/guix.texi (Guix Build Coordinator): Update documentation.
* doc/guix.texi (sane-service-type): Move from between documentation
about geoclue, expand slightly.
(sane-backends-minimal): New description.
(sane-backends): New description, new example.
Signed-off-by: Nicolas Goaziou <mail@nicolasgoaziou.fr>
Instead of returning multiple services in simple-cuirass-services, rely on the
instantiate-missing-services procedure to instantiate postgresql and
postgresql-role-service-type when missing.
Turn simple-cuirass-services procedure into
simple-cuirass-configuration->specs, that takes a simple-cuirass-configuration
record and returns a Cuirass specification.
Suggested-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/cuirass.scm (%default-cuirass-config): Remove it.
(simple-cuirass-services): Rename it to ...
(simple-cuirass-configuration->specs): ... this procedure.
* gnu/tests/cuirass.scm (cuirass-services): Remove postgresql and
postgresql-role services that are automatically instantiated.
(simple-cuirass-service): New variable.
(%cuirass-simple-test): Adapt it to use simple-cuirass-configuration->specs
instead of simple-cuirass-services.
* doc/guix.texi (Simple Cuirass): Update it.
* gnu/services/cuirass.scm (<build-manifest>,
<simple-cuirass-configuration>): New records.
(build-manifest, build-manifest?, simple-cuirass-configuration,
simple-cuirass-configuration?, simple-cuirass-services): New procedures.
(%default-cuirass-config): New variable.
* gnu/tests/cuirass.scm (%cuirass-simple-test): New variable.
* doc/guix.texi (Continuous Integration): Document it.
* doc/guix.texi (Base Services)[pam-limits-service]: Add an example and
explanation of how the 'nofile', or open file descriptors value, can be
configured.
Remove the 'vm-image' command that has been superseded by the 'image'
command.
* gnu/system/vm.scm (system-qemu-image): Remove it.
* guix/scripts/system.scm (system-derivation-for-action): Mark 'vm-image'
command as deprecated and use the image API to produce the VM image.
(perform-action, show-help): Adapt accordingly.
* tests/guix-system.sh: Ditto.
* doc/guix.texi (Invoking guix system,
Running Guix in a VM): Ditto.
* etc/completion/fish/guix.fish: Ditto.
* etc/completion/zsh/_guix: Ditto.
* gnu/services/vpn.scm (wireguard-peer, wireguard-configuration): New records.
(wireguard-service-type): New variable.
* doc/guix.texi (VPN Services): Document it.
* gnu/services/web.scm (<agate-configuration>): New record type.
(agate-accounts, agate-shepherd-service): New procedures.
(agate-service-type): New variable.
* doc/guix.texi (Web Services): Document it.
Signed-off-by: Nicolas Goaziou <mail@nicolasgoaziou.fr>
* doc/guix.texi (Invoking guix environment): Explain how to exit and clean up
a Guix environment.
The current documentation doesn't explain how to exit an environment or how to
remove the packages after exiting.
Signed-off-by: Nicolas Goaziou <mail@nicolasgoaziou.fr>
* build-aux/test-driver.scm (script-version): Update.
(show-help): Document it.
(%options): Add the 'show-duration' option.
(test-runner-gnu): Pass as a new argument.
[test-cases-start-time]: New inner variable.
[test-on-test-begin-gnu]: New hook, used to record the start time.
[test-on-test-end-gnu]: Conditionally print elapsed time. Record it as the
optional metadata in the test result file (.trs).
* doc/guix.texi (Running the Test Suite): Document it.
The meson-for-build package doesn't carry any special patch anymore; it
appears to be obsolete.
* gnu/packages/build-tools.scm (meson-for-build): Remove variable.
* guix/build-system/meson.scm (default-meson): Use meson.
* doc/guix.texi (Build Systems): Update doc.
* guix/scripts/package.scm (export-manifest): New procedure.
(show-help, %options): Add '--export-manifest'.
(process-query): Honor it.
* guix/build/profiles.scm (build-profile): Mention it.
* tests/guix-package.sh: Test it.
* doc/guix.texi (Invoking guix package): Document it.
* build-aux/test-driver.scm (show-help): Add the help text for the
new '--errors-only' option.
(%options): Add the errors-only option.
(test-runner-gnu): Add the errors-only? parameter and update doc. Move the
logging of the test data after the test has completed, so a choice can be made
whether to keep it or discard it based on the value of the test result.
(main): Pass the errors-only? option to the driver.
* doc/guix.texi (Running the Test Suite): Document the new option.
* build-aux/test-driver.scm (show-help): Add help text for the new --select
and --exclude options.
(%options): Add the new select and exclude options.
(test-runner-gnu): Pass them to the test runner. Update doc.
(test-match-name*, test-match-name*/negated, %test-match-all): New variables.
(main): Compute the test specifier based on the values of the new options and
apply it to the current test runner when running the test file.
* doc/guix.texi (Running the Test Suite): Document the new options.
* gnu/services/databases.scm (postgresql-configuration-log-directory): New
procedure.
(<postgresql-configuration>)[log-directory]: New field.
(postgresql-activation): Create the log directory.
(postgresql-shepherd-service): Honor it.
* gnu/tests/databases.scm (%postgresql-log-directory): New variable.
(log-file): New test case.
* doc/guix.texi (Database Services): Document it.
* gnu/services/databases.scm (postgresql-config-file-compiler): Support Guile
datatypes in the "extra-config" field.
* gnu/tests/databases.scm (%postgresql-os): Test it.
* doc/guix.texi (Database Services): Document it.
Reported by pineapples on #guix.
This is a followup to 8e1907a724.
* doc/guix.texi (Invoking guix package): Remove sentence that says that
package transformations are lost upon upgrading and explicitly say the
opposite.
* doc/contributing.texi: Replace link to TP with a link to Weblate.
* doc/guix.texi: Replace link to TP with a link to Weblate.
* doc/guix-cookbook.texi: Replace link to TP with a link to Weblate.
* gnu/services/virtualization.scm (qemu-binfmt-service-type)[guix-support?]:
Change the default from #f to #t.
* doc/guix.texi (Transparent Emulation with QEMU): Change the default of
‘guix-support?’ from #f to #t. Describe the implication of setting it to #f.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* guix/scripts/publish.scm (compress-nar)[write-compressed-file]: New
procedure.
Use it for 'gzip' and 'lzip'. Add 'zstd.
(nar-response-port, string->compression-type): Add case for 'zstd'.
* tests/publish.scm (zstd-supported?): New procedure.
("/nar/zstd/*"): New test.
* doc/guix.texi (Invoking guix publish): Document zstd compression.
(Base Services): Add cross-reference to the above node.
* doc/contributing.texi (Running Guix Before It Is Installed): Instruct
user to run ./bootstrap before ./configure.
Signed-off-by: Jakub Kądziołka <kuba@kadziolka.net>
* gnu/services/mail.scm (radicale-configuration)
(radicale-configuration?): New procedures.
(%default-radicale-config-file)
(radicale-service-type): New variables.
* doc/guix.texi: Document it.
Suggested by Philippe Swartvagher <philippe.swartvagher@inria.fr>.
* guix/transformations.scm (transform-package-patches): New procedure.
(%transformations): Add it as 'with-patch'.
(%transformation-options, show-transformation-options-help/detailed):
Add '--with-patch'.
* tests/transformations.scm ("options->transformation, with-patch"): New
test.
* doc/guix.texi (Package Transformation Options): Document it.
This simplifies setup of build machines: no need to install Guile in
addition to Guix, no need to set 'GUILE_LOAD_PATH' & co., leading to
fewer failure modes.
* guix/ssh.scm (remote-run): New procedure.
(remote-daemon-channel): Use it instead of 'open-remote-pipe*'.
(store-import-channel)[import]: Remove check for module availability.
Add call to 'primitive-exit'.
Use 'remote-run' instead of 'open-remote-pipe'.
(store-export-channel)[export]: Remove check for module availability.
Add calls to 'primitive-exit'.
Use 'remote-run' instead of 'open-remote-pipe'.
(handle-import/export-channel-error): Remove 'module-error' clause.
(report-module-error): Remove.
* guix/scripts/offload.scm (assert-node-has-guix): Replace call to
'report-module-error' by 'leave'.
* doc/guix.texi (Daemon Offload Setup): Remove mention of Guile.
* guix/import/cran.scm (%input-style): New parameter.
(format-inputs): Use it.
* guix/scripts/import/cran.scm (guix-import-cran): Set the %input-style
parameter.
(%options): Add "--style" option.
* doc/guix.texi (Invoking guix import): Document it.
* guix/import/opam.scm (get-opam-repository): Add support for coq
repositories.
(ocaml-name->guix-name): Properly name coq package.
* doc/guix.texi (Invoking guix import): Document it.
There are plenty of options supported that the Guix configuration record
doesn't help you with, so add this field to allow users to do their own thing.
* gnu/services/monitoring.scm (<prometheus-node-exporter-configuration>): Add
extra-options field.
(prometheus-node-exporter-shepherd-service): Handle the extra options.
* doc/guix.texi (Prometheus Node Exporter Service): Document this.
* doc/guix.texi (Keyboard Layout and Networking and Partitioning): Add
F2FS to the footnote of Guix System's supported root file systems.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
It is a common mistake to modify an <origin> record that computes to a
fixed-output derivation, forgetting to update its hash field, only to find out
that a previously built source gets used instead. While there doesn't seem to
be an obvious solution to this problem, we can at least document the fact that
sources can be checked the same as other builds.
* doc/guix.texi (Additional Build Options): Document that source derivation
builds can be verified using --check.
* guix/scripts/processes.scm (lock->recutils): New procedure.
(daemon-session->recutils): Use it.
(daemon-sessions->recutils, session-key->recutils)
(session-scalars->normalized-record)
(child-process->normalized-record)
(daemon-sessions->normalized-record): New procedures.
(session-rec-type, lock-rec-type, child-process-rec-type)
(%available-formats): New variables.
(list-formats): New procedure.
(%options, show-help): Add '--format'.
(%default-options): New variable.
(guix-processes): Use 'parse-command-line' instead of 'args-fold*'.
Honor the 'format' value in OPTIONS.
* doc/guix.texi (Invoking guix processes): Document '--format'.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* guix/scripts/processes.scm (daemon-session->recutils): Put child
process information in separate fields.
* doc/guix.texi (Invoking guix processes): Document change in output of
'guix processes'.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
